summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-22ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdkMarkus Pargmann
Both buses are not used on the phyCARD-S module. This patch moves them to the rdk file. Remove ioexpander. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27 phyCARD-S SOM remove wrong i2c sensorMarkus Pargmann
This sensor was introduced in the original pca100 board file, but phyCARD-S SOM and RDK do not have a temperature sensor. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: Add the missing cpus nodeFabio Estevam
To make it consistent with the other i.mx SoCs, let's add the cpus nodes. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6dl-wandboard: Add audio supportFabio Estevam
Wandboard has a sgtl5000 codec. Add audio support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27 phyCARD-S remove wrong I2C RTCMarkus Pargmann
Fixup of commit "ARM: dts: Add device tree support for phycard pca100". Remove wrong I2C RTC node. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27-phytec-phycore-som: Using labels for reusing UART, I2C and FECAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27-phytec-phycore-rdk: Add CAN nodeAlexander Shiyan
This patch adds CAN (NXP SJA1000) node for Phytec PCM-970 RDK. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27-phytec-phycore-som: Add SRAM nodeAlexander Shiyan
This patch adds SRAM node for Phytec PCM-038 module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27-phytec-phycore-som: Add WEIM nodeAlexander Shiyan
This patch adds WEIM node for Phytec PCM-038 module. Migrate existing on-module NOR-flash as children of WEIM CS0. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add WEIM nodeAlexander Shiyan
This patch adds the missing (Wireless External Interface Module) WEIM devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Move IIM node under AIPI2 busAlexander Shiyan
This patch moves IIM node under AIPI2 bus, since this is proper location for this module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx: add #dma-cells property for sdmaHuang Shijie
Add the #dma-cells property for all the sdma in all the imx platforms. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM i.MX6DL: dts: add clock and mux configuration for LDBPhilipp Zabel
i.MX6DL does not have the second IPU, but the LVDS multiplexers can connect either LVDS channel of the LDB to IPU1 DI0 or IPU1 DI1. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [shawn.guo: remove "crtcs" property from imx6qdl.dtsi] Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: mx53qsb: Enable VPU supportFabio Estevam
Enable Video Processing Unit (VPU) support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: add sram for imx53 and imx6qPhilipp Zabel
This patch enables the On-Chip SRAM (OCRAM) on i.MX53 and i.MX6 SoCs. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: Add device tree support for phycard pca100Markus Pargmann
Board files for Phytec phyCARD-S "System on Module" and "Rapid Development Kit". Based on patches from: Steffen Trumtrar <s.trumtrar@pengutronix.de>: - Original patch - ARM: dts: Set partition offsets for phycard - ARM: dts: Use CSPI1 instead of CSPI2 on phycard pca100 - ARM: imx27-phytec-phycard-S.dts: resize nand partitions Jan Luebbe <jlu@pengutronix.de>: - ARM: dts: Enable bad block table in NAND Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27 cpufreq-cpu0 frequenciesMarkus Pargmann
Set operating-points for imx27. There is no regulator support, so the voltages are 0. The frequencies should be the same for all imx27 boards, so it is defined here and can be overwritten if necessary. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add 1-wireMarkus Pargmann
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add imx framebuffer deviceMarkus Pargmann
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx27: Use 'AITC' for the interrupt controller nameFabio Estevam
On the MX27 Reference Manual the interrupt controller is named AITC: ARM926EJ-S Interrupt Controller So use the AITC term instead of AVIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Origin: id:1334193132-18944-2-git-send-email-festevam@gmail.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add USB host1/2 pinmux entriesSascha Hauer
This adds pinmux entries for USBH1/2 in ULPI mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51 babbage: Add spi-cs-high property to pmicSascha Hauer
The mc13892 driver knows that it needs spi-cs-high, so the mc13892 will work. The dataflash also connected to this bus though can only be probed when the mc13892 is inactive. Due to driver potential differences in the probe order we can only make sure the mc13892 is inactive when we put the information into the devicetree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: move kpp pinmux entrySascha Hauer
For keeping the alphabetical order in the pinmux nodes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX6: Add i2c and spi aliasesSascha Hauer
This allows to order the i2c and spi devices correctly. While at it reorder the aliases entries alphabetically. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX53: Add i2c and spi aliasesSascha Hauer
This allows to order the i2c and spi devices correctly. While at it reorder the aliases entries alphabetically. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add i2c and spi aliasesSascha Hauer
This allows to order the i2c and spi devices correctly. While at it reorder the aliases entries alphabetically. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add i2c aliasesSascha Hauer
This allows to order the i2c devices correctly. While at it reorder the aliases entries alphabetically. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX25: Add i2c and spi aliasesSascha Hauer
This allows to order the i2c and spi devices correctly. While at it reorder the aliases entries alphabetically. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX53: Add iim nodeSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX51: Add iim nodeSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX25: Add iim nodeSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX31: Add iim nodeSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX27: Add iim nodeSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX6qdl: Add i.MX31 compatible to gpt nodeSascha Hauer
The i.MX6 gpt is handled by the i.MX31 gpt driver in the kernel, so add a corresponding compatible entry. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX6qdl: Add compatible and clock to flexcan nodesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: i.MX6: sync imx6q and imx6dl pinmux entriesSascha Hauer
The i.MX6Q and i.MX6DL are pin compatible, so the pinmux entries should be in sync. This patch systematically adds the pinmux entries missing from the imx6q to the imx6dl file. Some name inconsistencies and whitespace damage is fixed along the way. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add kpp devicetree nodeAlexander Shiyan
This patch adds the missing (Keypad Port) KPP devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27-phytec-phycore-som: Define minimal memory layoutAlexander Shiyan
Define minimal memory layout for i.MX27 PCM-038 module. This will help to use appended DTB with non-DT capable bootloaders. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Sort entries by addressAlexander Shiyan
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Rename PWM devicetree nodeAlexander Shiyan
i.MX27 have only one PWM, so index from PWM devicetree node removed. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add AUDMUX devicetree nodeAlexander Shiyan
This patch adds the missing (Digital Audio MUX) AUDMUX devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx27: Add SAHARA2 devicetree nodeAlexander Shiyan
This patch adds the missing (Symmetric/Asymmetric Hashing and Random Accelerator) SAHARA2 devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: apf27dev: add rtc ds1374 to the device treePhilippe Reynes
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: dts: imx6qdl-sabresd: enable the SPI NORHuang Shijie
enable the spi nor for imx6q{dl}-sabresd boards. Signed-off-by: Huang Shijie <b32955@freescale.com>
2013-08-22ARM: dts: imx6q: add a new pinctrl for ecspi1Huang Shijie
This new pinctrl is used by the imx6q-sabresd board. Signed-off-by: Huang Shijie <b32955@freescale.com>
2013-08-22ARM: dts: imx6dl: add a new pinctrl for ecspi1Huang Shijie
This new pinctrl is used in the imx6dl-sabresd board. Signed-off-by: Huang Shijie <b32955@freescale.com>
2013-08-22Merge tag 'imx-soc-3.12' into imx/dtShawn Guo
It contains a bunch of imx soc updates for 3.12. - Add more ethernet phy fixups for imx6 boards - Add some missing imx6q clocks into clock driver - Add new clock types fixup mux and div to work around some ugly hardware defect - Consolidate L2 cache initialization function, so that it can be used on more i.MX SoCs - Replace magic numbers in mach-imx6q.c with well defined macros - Small fixes for imx6q and pllv3 clock drivers - Some random updates on imx defconfig files
2013-08-22phy: micrel: Add definitions for common Micrel PHY registersDinh Nguyen
Add defines for common Micrel PHY setups so that other platforms can use them. Update imx61 and sama5 hardware to use the micrel_phy.h PHY defines. Also add support for the KSZ9021RLRN PHY. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: David S. Miller <davem@davemloft.net> CC: Andrew Victor <linux@maxim.org.za> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 optionFabio Estevam
Commit 02502da45 (ASoC: imx-mc13783: Depend on ARCH_ARM) caused the selection of CONFIG_SND_SOC_IMX_MC13783 to be impossible due to a wrong dependency, which caused CONFIG_SND_SOC_IMX_MC13783 to be removed after the defconfigs cleanups. The original selection problem has been fixed by 9f19de649f (ASoC: imx-mc13783: Make SND_SOC_IMX_MC13783 visible again), so it is possible to select CONFIG_SND_SOC_IMX_MC13783 again as originally done. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22ARM: imx: Move anatop related from board file to anatop driverPeter Chen
Move anatop related (For USB) from board file to anatop driver Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit (git 2.34.1) at 2025-07-15 11:32:06 +0000