| Age | Commit message (Collapse) | Author |
|---|
|
Commit 429f203eb712 ("arm64: dts: uniphier: route on-board device IRQ
to GPIO controller") missed to update this DTS. It becames a real
problem when arm and arm64 trees are merged together.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add binding documentation for the Technologic Systems NBUS that is used
to interface with peripherals in the FPGA of the TS-4600 SoM.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts64 updates for 4.15 part2" from Heiko Stübner:
Support for the RGA (raster graphics accelerator) on rk3399
and efuses on rk3368.
* tag 'v4.15-rockchip-dts64-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add efuse for RK3368 SoCs
arm64: dts: rockchip: add RGA device node for RK3399
clk: rockchip: add more rk3188 graphics clock ids
clk: rockchip: add clock id for PCLK_EFUSE256 of RK3368 SoCs
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 updates for 4.15 part2" from Heiko Stübner:
CEC support for the two rk3288-firefly variants and general hdmi support
for the firefly-reload. A lot of additions and corrections for the
rk3288-vyasa and thermal support for the rv1108.
* tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reload
ARM: dts: rockchip: define the two possible rk3288 CEC pins
ARM: dts: rockchip: add the cec clk for dw-hdmi on rk3288
ARM: dts: rockchip: Add io domains for rk3288-vyasa
ARM: dts: rockchip: Add usb otg for rk3288-vyasa
ARM: dts: rockchip: Add usb host for rk3288-vyasa
ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
ARM: dts: rockchip: Add regulators for rk3288-vyasa
ARM: dts: rockchip: Use vmmc-supply from PMIC on rk3288-vyasa
ARM: dts: rockchip: Remove vdd_log from rk808, DCDC_REG1 on rk3288-vyasa
ARM: dts: rockchip: enable tsadc module on RV1108 evaluation board
ARM: dts: rockchip: add thermal nodes for RV1108 SoC
ARM: dts: rockchip: add tsadc node for RV1108 SoC
ARM: dts: rockchip: add RGA device node for RK3288
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner arm64 changes, take 2" from Maxime Ripard:
Reintroduction of the EMAC bindings that were reverted in 4.13.
* tag 'sunxi-dt64-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: add snps,dwmac-mdio compatible to emac/mdio
arm64: dts: allwinner: A64: Restore EMAC changes
|
|
next/dt
Pull "mvebu dt64 for 4.15 (part 2)" from Gregory CLEMENT:
Add the extended UART support on Armada 3700
* tag 'mvebu-dt64-4.15-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-3720-espressobin: fill UART nodes
arm64: dts: marvell: armada-3720-db: enable second UART port
arm64: dts: marvell: armada-37xx: add second UART port
arm64: dts: marvell: armada-37xx: add UART clock
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner DT changes for 4.15, take 2" from Maxime Ripard:
Here are a few commits that would be great to get in 4.15, given how
long they've been hanging around.
The first and most important one is the reintroduction of the EMAC DT
changes after they've been reverted at the last minute in 4.13.
There's a arm64 patch that crept in because the H5 and H3 share a
common DTSI that is located in arch/arm, and merging that patch
through the arm64 PR, especially given the pull requests that have
already been sent, would just have generated too many conflicts.
* tag 'sunxi-dt-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a711: Enable USB OTG
ARM: dts: sun8i: a711: Add regulator support
ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
ARM: dts: sunxi: Add dtsi for AXP81x PMIC
arm64: dts: allwinner: H5: Restore EMAC changes
ARM: dts: sunxi: Restore EMAC changes (boards)
ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac
arm: dts: sunxi: h3/h5: Restore EMAC changes
dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY
dt-bindings: net: Restore sun8i dwmac binding
|
|
into next/dt
Pull "Mediatek: 32-bit DTS updates for v4.15" from Matthias Brugger:
- mt7623 update nodes to binding description
- mt2701 add display pwn nodes
- mt2701 update audio node description
* tag 'v4.14-next-dts32-2' of https://github.com/mbgg/linux-mediatek:
arm: dts: mt7623: remove unused compatible string for pio node
arm: dts: mt7623: update usb related nodes
arm: dts: mt7623: update crypto node
arm: dts: mediatek: update audio node for mt2701 and mt7623
arm: dts: mt2701: enable display pwm backlight
arm: dts: mt2701: add pwm backlight device node
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into next/dt
Pull "Realtek ARM64 based SoC DT for v4.15" from Andreas Färber:
This refactors the RTD1295 DT, preparing for (but not yet adding)
RTD1293 and RTD1296. Superfluous reg property entries are dropped.
DTs for PROBOX2 AVA and MeLE V9 TV boxes are added.
* tag 'realtek-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek:
arm64: dts: realtek: Add MeLE V9
dt-bindings: arm: realtek: Document MeLE V9
dt-bindings: Add vendor prefix for MeLE
arm64: dts: realtek: Factor out common RTD129x parts
arm64: dts: realtek: Add ProBox2 Ava
dt-bindings: arm: realtek: Add ProBox2 AVA
dt-bindings: Add vendor prefix for ProBox2
arm64: dts: realtek: Clean up RTD1295 UART reg property
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Pull "Actions Semi ARM64 based SoC DT for v4.15" from Andreas Färber:
This updates the Bubblegum-96 DT with a clock node for the debug UART.
* tag 'actions-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Pull "Actions Semi ARM based SoC DT for v4.15" from Andreas Färber:
This updates the Guitar board DT with a clock node for the debug UART
and adds a new DT for the CubieBoard6.
It also updates the S500 DT with CPU power domains.
* tag 'actions-arm-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: dts: owl-s500: Add CubieBoard6
dt-bindings: arm: actions: Add CubieBoard6
ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
|
|
Give the serial driver a fixed-clock as input for baudrate 115200.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Add a Device Tree for Cubietech CubieBoard6.
Cc: support@cubietech.com
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Define a compatible string for Cubietech CubieBoard6.
Cc: support@cubietech.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Add a fixed-clock for baudrate 115200.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
CPU2 has its own power domain PD_CPU2, and CPU3 has PD_CPU3.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
MT7623 has its own compatible in pinctrl driver so we don't need the
backward compatible for it.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The current usb related nodes are out-of-date, so we make them be
consistent with the binding documents.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
This patch updates compatible string and clocks for the crypto node.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt
Pull "SoCFPGA DTS updates for v4.15, part 2" from Dinh Nguyen:
- Stratix10 platform update
- Enable GPIO and LEDs for Stratix10 devkit
* tag 'socfpga_dts_for_v4.15_part2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: fix interrupt number for gpio1
arm64: dts: stratix10: enable gpio and leds
arm64: dts: stratix10: add gpio header
|
|
The TBS A711 has a micro-USB connector that can be used in OTG mode. Enable
it.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The TBS A711 is using an AXP813 PMIC. Let's add all the regulators for that
board, and migrate the current, dumb, regulators to the actual ones.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The WiFi side of the AP6212 WiFi/BT combo module is connected to
mmc1. There are also GPIOs for enable and interrupts. An external
clock from the AC100 RTC is also used.
Enable WiFi on this board by enabling mmc1 and adding the power
sequencing clocks and GPIO, as well as the chip's interrupt line.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The WiFi side of the AP6330 WiFi/BT combo module is connected to
mmc1. There are also GPIOs for enable and interrupts. An external
clock from the AC100 RTC is also used.
Enable WiFi on this board by enabling mmc1 and adding the power
sequencing clocks and GPIO, as well as the chip's interrupt line.
For the WiFi module to correctly detect the frequency of its main
oscillator, the external low power clock must be set to 32768 Hz.
Their does not seem to be proper out-of-band interrupt support
for the BCM4330 chip within the AP6330 module. This part is left
out for now.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
mmc1 only has 1 possible pinmux setting.
Move any settings to the dtsi file and set it by default.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
This patch adds device nodes for all the regulators of the AXP818 PMIC.
Sunxi common regulators are removed, and USB VBUS regulators are added.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
This patch adds device nodes for all the regulators of the AXP813 PMIC.
Sunxi common regulators are removed, and USB VBUS regulators are added.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
This patch adds device nodes for all the regulators of the AXP818 PMIC.
Sunxi common regulators are removed, and USB VBUS regulators are added.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The AXP81x family of PMIC is used with the Allwinner A83T and H8 SoCs.
This includes the AXP813 and AXP818. There is no discernible difference
except the labeling. The AXP813 is paired with the A83T, while the
AXP818 is paired with the H8.
This patch adds a dtsi file for all the common bindings for these two
PMICs. Currently this is just listing all the regulator nodes. The
regulators are initialized based on their device node names.
In the future this would be expanded to include power supplies and
GPIO controllers.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore arm64 DT about dwmac-sun8i for H5
This reverts a part of commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore all boards DT about dwmac-sun8i
This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Since dwmac-sun8i could use either an integrated PHY or an external PHY
(which could be at same MDIO address), we need to represent this selection
by a MDIO switch.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore sunxi-h3-h5.dtsi
This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
This patch add documentation about the MDIO switch used on sun8i-h3-emac
for integrated PHY.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
stmmac bindings docs said that its mdio node must have
compatible = "snps,dwmac-mdio";
Since dwmac-sun8i does not have any good reasons to not doing it, all
their MDIO node must have it.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore arm64 DT about dwmac-sun8i for A64
This reverts commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore dt-bindings documentation about dwmac-sun8i
This reverts commit 8aa33ec2f481 ("dt-bindings: net: Revert sun8i dwmac binding")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Fill ESPRESSObin uart0 node with pinctrl information like in the
Armada-3720-DB device tree (which uses the same node).
Also explain how to enable the second UART port available on the
headers. This second port is not enabled by default because both
headers are dedicated to expose general purpose pins and remapping
some of them to use the second UART would break existing users.
Suggested-by: László ÁSHIN <laszlo@ashin.hu>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
Enable Armada-3720-DB second UART port by adding the corresponding
device tree node in the board DTS and enabling it.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
Add a node in Armada 37xx DTSI file for the second UART, with a
different compatible due to its extended IP which has some
differences with the first UART already in place.
Make use of this commit to also fully describe the first port and
use the same clear and named interrupt bindings for both ports.
The standard UART (UART0) uses level-interrupts while the extended
UART (UART1) uses edge-triggered interrupts.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
Add the missing clock property to armada-3700 UART node.
This clock will be used to derive the prescaler value to comply with
the requested baudrate.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Pull "Amlogic 64-bit DT updates for v4.15, round 2" from Kevin Hilman:
- add support for new GPIO IRQ driver
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gx: add external PHY interrupt on some platforms
ARM64: dts: meson-gx: add gpio interrupt controller
ARM64: meson: enable MESON_IRQ_GPIO in Kconfig
ARM64: dts: meson-gxbb-odroidc2: fix usb1 power supply
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "Freescale arm64 device tree updates for 4.15" from Shawn Guo:
- Add GICv3 ITS node and PCIe devcies for LS1088A support.
- Enable PCIe support for LS2088A SoC.
- Add OP-TEE support for various Layerscape SoCs, LS1012A, LS1043A,
LS1046A, LS1088A and LS208XA.
- Update DPAA QBMan nodes to use constant defines in the interrupt
description.
- Add DSPI device to support SPI-NOR on LS1012A based boards.
* tag 'imx-dt64-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: update the DPAA QBMan nodes
arm64: dts: ls1088a: add PCIe controller DT nodes
arm64: dts: ls1088a: add gicv3 ITS DT node
arm64: dts: ls2088a: add pcie support
arm64: dts: ls: Add optee node
dt-bindings: mtd: add sst25wf040b and en25s64 to sip-nor list
dt-bindings: spi: Add fsl,ls1012a-dspi compatible string
arm64: dts: ls1012a: add the DTS node for DSPI support
|
|
next/dt
Pull "Mediatek: 64-bit DT update for v4.15" from Matthias Brugger:
- mt2712: add cpuidle support
* tag 'v4.14-next-dts64' of https://github.com/mbgg/linux-mediatek:
arm64: dts: mediatek: Add cpuidle support for MT2712
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Pull "Amlogic 64-bit platforms: DT updates for v4.15" from Kevin Hilman:
- new SoC support: A113D
- new boards: Tronsmart Vega S96, Khadas vim2
- reserved memory fixups
- gpio-names cleanups
- MMC cleanups, enable high-speed modes
- misc cleanups
* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-axg: add initial A113D SoC DT support
dt-bindings: arm: amlogic: Add Meson AXG binding
ARM64: dts: meson-gx: remove unnecessary uart compatible
ARM64: dts: meson-gx: remove unnecessary clocks properties
ARM64: dts: meson-gxl: Add alternate ARM Trusted Firmware reserved memory zone
ARM64: dts: meson-gxm: enable HS400 on the vim2
ARM64: dts: meson-gxbb-nexbox-a95x: Enable USB Nodes
dt-bindings: arm: amlogic: Add Tronsmart Vega S96 binding
ARM64: dts: meson-gxm: Add Vega S96 board
ARM64: dts: meson-gxm: Add support for Khadas VIM2
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins
ARM64: dts: meson-gxl: adjust libretech-cc gpio-line-names
ARM64: dts: meson-gxl: adjust kvim gpio-line-names
ARM64: dts: meson-gxbb: adjust odroid-c2 gpio-line-names
ARM64: dts: meson-gxbb: adjust nanopi-k2 gpio-line-names
ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N
ARM64: dts: meson-gx: remove gpio offset
ARM: dts: meson8: remove gpio offset
ARM64: dts: meson-gxl-libretech-cc: enable internal phy leds
ARM64: dts: meson-gxl-libretech-cc: enable saradc
|
|
next/dt
Pull "mvebu dt64 for 4.15 (part 1)" from Gregory CLEMENT:
On Armada 7K/8k:
- Improve network support at SoC and board level
- Enable watchdog
- Add UART muxing
- On 7040 DB: add CD SDIO and NAND support
- On 8040 DB: add PCIE more ports and SPI1
On Armada 37xx:
- Fix UART register size
- Add vmmc regulator for SD on 3720 DB
* tag 'mvebu-dt64-4.15-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP
arm64: dts: marvell: 7040-db: Document the gpio expander
arm64: dts: marvell: enable additional PCIe ports on Armada 8040 DB
arm64: dts: marvell: add NAND support on the 7040-DB board
arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1
arm64: dts: marvell: 8040-db: enable the SFP ports
arm64: dts: marvell: 7040-db: enable the SFP port
arm64: dts: marvell: 7040-db: add comphy reference to Ethernet port
arm64: dts: marvell: mcbin: add comphy references to Ethernet ports
arm64: dts: marvell: 37xx: remove empty line
arm64: dts: marvell: cp110: add PPv2 port interrupts
arm64: dts: marvell: add comphy nodes on cp110 master and slave
arm64: dts: marvell: extend the cp110 syscon register area length
arm64: dts: marvell: enable AP806 watchdog
arm64: dts: marvell: Fix A37xx UART0 register size
arm64: dts: marvell: armada-3720-db: Add vmmc regulator for SD slot
arm64: dts: marvell: add UART muxing on Armada 7K/8K
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "arm64: tegra: Device tree changes for v4.15-rc1" from Thierry Reding:
Enables host1x, VIC, PCIe and the BPMP thermal sensor on Tegra186.
* tag 'tegra-for-4.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add BPMP thermal sensor to Tegra186
arm64: tegra: Enable PCIe on Jetson TX2
arm64: tegra: Add PCIe node for Tegra186
arm64: tegra: Add VIC on Tegra186
arm64: tegra: Add host1x on Tegra186
arm64: tegra: Add #power-domain-cells for BPMP
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.15" from Simon Horman:
* r8a7795 (H3) and r8a7796 (M3-W) SoCs
- Use R-Car Gen 3 fallback compat string for GPIO
Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
compat strings in peace of now deprecated non-generation specific R-Car
GPIO fallback compat string in the DT of Renesas ARM and arm64 based
SoCs.
* r8a7795 (H3) and r8a7796 (M3-W) Salvator boards
- Add dr_mode property for USB2.0 channel 0
Shimoda-san says "Since Salvator-X[S] have a USB2.0 dual-role channel
(CN9), this patch
adds dr_mode property for USB2.0 channel 0 (EHCI/OHCI and HS-USB)
as "otg".
Using dual-role channel (or not) is related to the type of USB receptor
on board specification. So, I added the property into the
salvator-common.dtsi."
- Add pfc node for USB3.0 channel 0
Shimoda-san says "Since a R-Car Gen3 bootloader enables the PFC of
USB3.0 channel 0, the USB3.0 host controller works without this setting
on the kernel. But, this setting should have salvator-common.dtsi. So,
this patch adds the pfc node for USB3.0 channel 0."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB boards
- Correct audio_clkout
Morimoto-san says ""audio_clkout" is dummy clock of <&rcar_sound 0> to
avoid clock loop which invites probe conflct. Thus <&rcar_sound 0> and
"audio_clkout" should be same value."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB, and
r8a77995 (D3) Draak boards
- Drop "avb_phy_int" from avb_pins
Shimoda-san says "Since the Ethernet AVB driver doesn't support
AVB_PHY_INT handling and it will be handled by a phy driver as a gpio
pin, this patch removes the "avb_phy_int" from the avb_pins node."
* r8a77995 (D3) Draak board
- Enable PWM channels
Shimoda-san says "Each channel connects to LTC2644 for brightness
control."
* r8a77970 (V3M) Eagle and ULCB Kingfisher boards
- Add initial device tree support
* tag 'renesas-arm64-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
arm64: dts: renesas: salvator-common: add dr_mode property for USB2.0 channel 0
arm64: dts: r8a7796: Use R-Car GPIO Gen3 fallback compat string
arm64: dts: r8a7795: Use R-Car GPIO Gen3 fallback compat string
arm64: renesas: ulcb: fixup audio_clkout
arm64: renesas: salvator-common: fixup audio_clkout
arm64: dts: renesas: eagle: add EtherAVB support
arm64: dts: r8a77995: Add INTC-EX device node
arm64: dts: r8a77970: Add INTC-EX device node
arm64: dts: r8a7796: Add INTC-EX device node
arm64: dts: ulcb-kf: hog USB3 hub control gpios
arm64: dts: ulcb-kf: enable PCA9548 on I2C4
arm64: dts: ulcb-kf: enable PCA9548 on I2C2
arm64: dts: ulcb-kf: enable TCA9539 on I2C4
arm64: dts: ulcb-kf: enable TCA9539 on I2C2
arm64: dts: ulcb-kf: enable USB3.0 Host
arm64: dts: ulcb-kf: enable PCIE0/1
arm64: dts: ulcb-kf: enable USB2.0 Host channel 0
arm64: dts: ulcb-kf: enable HSUSB
arm64: dts: ulcb-kf: enable CAN0/1
arm64: dts: ulcb-kf: enable SCIF1
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt
Pull "UniPhier ARM64 SoC DT updates for v4.15" from Masahiro Yamada:
- add thermal monitor and thermal zone nodes
- add efuse nodes
- fix W=2 warnings
- add GPIO controller nodes and related properties
- add resets properties
* tag 'uniphier-dt64-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: add resets properties
arm64: dts: uniphier: add eMMC hardware reset provider node
arm64: dts: uniphier: add GPIO hog definition
arm64: dts: uniphier: route on-board device IRQ to GPIO controller
arm64: dts: uniphier: add GPIO controller nodes
arm64: dts: uniphier: fix W=2 build warnings
arm64: dts: uniphier: enable NAND for PXs3 reference board
arm64: dts: uniphier: add efuse node for LD11, LD20, and PXs3
arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner arm64 DT changes for 4.15" from Maxime Ripard:
Most notable changes:
- SPI and DMA support on the a64
- New boards: NanoPi NEO Plus2
* tag 'sunxi-dt64-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: allwinner: Correct unit name in devicetree binding example
arm64: allwinner: a64: add dma controller references to spi nodes
arm64: allwinner: a64: Add device node for DMA controller
arm64: allwinner: a64: Fix node with unit name and no reg property
arm64: allwinner: a64: Fix simple-bus unit address format error
arm64: allwinner: h5: add NanoPi NEO Plus2 DT support
arm64: allwinner: a64: add SPI nodes
|
