| Age | Commit message (Collapse) | Author |
|---|
|
We currently overload the pending_chunks list to handle updating
btrfs_device->commit_bytes used. We don't actually care about the
extent mapping or even the device mapping for the chunk - we just need
the device, and we can end up processing it multiple times. The
fs_devices->resized_list does more or less the same thing, but with the
disk size. They are called consecutively during commit and have more or
less the same purpose.
We can combine the two lists into a single list that attaches to the
transaction and contains a list of devices that need updating. Since we
always add the device to a list when we change bytes_used or
disk_total_size, there's no harm in copying both values at once.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Up until now trimming the freespace was done irrespective of what the
arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments
will be entirely ignored. Fix it by correctly handling those paramter.
This requires breaking if the found freespace extent is after the end of
the passed range as well as completing trim after trimming
fstrim_range::len bytes.
Fixes: 499f377f49f0 ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Improve clone_range in two scenarios.
1. Remove the limit of inode size when find clone inodes We can do
partial clone, so there is no need to limit the size of the candidate
inode. When clone a range, we clone the legal range only by bytenr,
offset, len, inode size.
2. In the scenarios of rewrite or clone_range, data_offset rarely
matches exactly, so the chance of a clone is missed.
e.g.
1. Write a 1M file
dd if=/dev/zero of=1M bs=1M count=1
2. Clone 1M file
cp --reflink 1M clone
3. Rewrite 4k on the clone file
dd if=/dev/zero of=clone bs=4k count=1 conv=notrunc
The disk layout is as follows:
item 16 key (257 EXTENT_DATA 0) itemoff 15353 itemsize 53
extent data disk byte 1103101952 nr 1048576
extent data offset 0 nr 1048576 ram 1048576
extent compression(none)
...
item 22 key (258 EXTENT_DATA 0) itemoff 14959 itemsize 53
extent data disk byte 1104150528 nr 4096
extent data offset 0 nr 4096 ram 4096
extent compression(none)
item 23 key (258 EXTENT_DATA 4096) itemoff 14906 itemsize 53
extent data disk byte 1103101952 nr 1048576
extent data offset 4096 nr 1044480 ram 1048576
extent compression(none)
When send, inode 258 file offset 4096~1048576 (item 23) has a chance to
clone_range, but because data_offset does not match inode 257 (item 16),
it causes missed clone and can only transfer actual data.
Improve the problem by judging whether the current data_offset has
overlap with the file extent item, and if so, adjusting offset and
extent_len so that we can clone correctly.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When an inode inherits property from its parent, we call btrfs_set_prop().
btrfs_set_prop() does an elaborate checks, which is not required in the
context of inheriting a property. Instead just open-code only the required
items from btrfs_set_prop() and then call btrfs_setxattr() directly. So
now the only user of btrfs_set_prop() is gone, (except for the wraper
function btrfs_set_prop_trans()).
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
@device_name in mount_subvol() is not used, drop it. Also see:
5bedc48a8f9e ("btrfs: drop unused parameters from mount_subvol").
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When accessing a file on a crafted image, btrfs can crash in block layer:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 136501067 P4D 136501067 PUD 124519067 PMD 0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc8-default #252
RIP: 0010:end_bio_extent_readpage+0x144/0x700
Call Trace:
<IRQ>
blk_update_request+0x8f/0x350
blk_mq_end_request+0x1a/0x120
blk_done_softirq+0x99/0xc0
__do_softirq+0xc7/0x467
irq_exit+0xd1/0xe0
call_function_single_interrupt+0xf/0x20
</IRQ>
RIP: 0010:default_idle+0x1e/0x170
[CAUSE]
The crafted image has a tricky corruption, the INODE_ITEM has a
different type against its parent dir:
item 20 key (268 INODE_ITEM 0) itemoff 2808 itemsize 160
generation 13 transid 13 size 1048576 nbytes 1048576
block group 0 mode 121644 links 1 uid 0 gid 0 rdev 0
sequence 9 flags 0x0(none)
This mode number 0120000 means it's a symlink.
But the dir item think it's still a regular file:
item 8 key (264 DIR_INDEX 5) itemoff 3707 itemsize 32
location key (268 INODE_ITEM 0) type FILE
transid 13 data_len 0 name_len 2
name: f4
item 40 key (264 DIR_ITEM 51821248) itemoff 1573 itemsize 32
location key (268 INODE_ITEM 0) type FILE
transid 13 data_len 0 name_len 2
name: f4
For symlink, we don't set BTRFS_I(inode)->io_tree.ops and leave it
empty, as symlink is only designed to have inlined extent, all handled
by tree block read. Thus no need to trigger btrfs_submit_bio_hook() for
inline file extent.
However end_bio_extent_readpage() expects tree->ops populated, as it's
reading regular data extent. This causes NULL pointer dereference.
[FIX]
This patch fixes the problem in two ways:
- Verify inode mode against its dir item when looking up inode
So in btrfs_lookup_dentry() if we find inode mode mismatch with dir
item, we error out so that corrupted inode will not be accessed.
- Verify inode mode when getting extent mapping
Only regular file should have regular or preallocated extent.
If we found regular/preallocated file extent for symlink or
the rest, we error out before submitting the read bio.
With this fix that crafted image can be rejected gracefully:
BTRFS critical (device loop0): inode mode mismatch with dir: inode mode=0121644 btrfs type=7 dir type=1
Reported-by: Yoon Jungyeon <jungyeon@gatech.edu>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202763
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a report in kernel bugzilla about mismatch file type in dir
item and inode item.
This inspires us to check inode mode in inode item.
This patch will check the following members:
- inode key objectid
Should be ROOT_DIR_DIR or [256, (u64)-256] or FREE_INO.
- inode key offset
Should be 0
- inode item generation
- inode item transid
No newer than sb generation + 1.
The +1 is for log tree.
- inode item mode
No unknown bits.
No invalid S_IF* bit.
NOTE: S_IFMT check is not enough, need to check every know type.
- inode item nlink
Dir should have no more link than 1.
- inode item flags
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Btrfs-progs already have a comprehensive type checker, to ensure there
is only 0 (SINGLE profile) or 1 (DUP/RAID0/1/5/6/10) bit set for chunk
profile bits.
Do the same work for kernel.
Reported-by: Yoon Jungyeon <jungyeon@gatech.edu>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202765
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
For fuzzed image whose DEV_ITEM has invalid total_bytes as 0, then
kernel will just panic:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
#PF error: [normal kernel read fault]
PGD 800000022b2bd067 P4D 800000022b2bd067 PUD 22b2bc067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 1106 Comm: mount Not tainted 5.0.0-rc8+ #9
RIP: 0010:btrfs_verify_dev_extents+0x2a5/0x5a0
Call Trace:
open_ctree+0x160d/0x2149
btrfs_mount_root+0x5b2/0x680
[CAUSE]
If device extent verification finds a deivce with 0 total_bytes, then it
assumes it's a seed dummy, then search for seed devices.
But in this case, there is no seed device at all, causing NULL pointer.
[FIX]
Since this is caused by fuzzed image, let's go the tree-check way, just
add a new verification for device item.
Reported-by: Yoon Jungyeon <jungyeon@gatech.edu>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202691
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we have btrfs_check_chunk_valid() in tree-checker, let's do
chunk item verification in tree-checker too.
Since the tree-checker is run at endio time, if one chunk leaf fails
chunk verification, we can still retry the other copy, making btrfs more
robust to fuzzed image as we may still get a good chunk item.
Also since we have done chunk verification in tree block read time, skip
the btrfs_check_chunk_valid() call in read_one_chunk() if we're reading
chunk items from leaf.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
of EIO
To follow the standard behavior of tree-checker.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Old error message would be something like:
BTRFS error (device dm-3): invalid chunk num_stipres: 0
New error message would be:
Btrfs critical (device dm-3): corrupt superblock syschunk array: chunk_start=2097152, invalid chunk num_stripes: 0
Or
Btrfs critical (device dm-3): corrupt leaf: root=3 block=8388608 slot=3 chunk_start=2097152, invalid chunk num_stripes: 0
And for certain error message, also output expected value.
The error message levels are changed from error to critical.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
By function, chunk item verification is more suitable to be done inside
tree-checker.
So move btrfs_check_chunk_valid() to tree-checker.c and export it.
And since it's now moved to tree-checker, also add a better comment for
what this function is doing.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The commit fcebe4562dec ("Btrfs: rework qgroup accounting") reworked
qgroups and added some new structures. Another rework of qgroup
mechanics e69bcee37692 ("btrfs: qgroup: Cleanup the old
ref_node-oriented mechanism.") stopped using them and left uncleaned.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters. As all callsites are updated, add the btrfs_ prefix as the
function is exported.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can read fs_info from extent buffer and can drop it from the
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Deduplicate the btrfs file type conversion implementation - file systems
that use the same file types as defined by POSIX do not need to define
their own versions and can use the common helper functions decared in
fs_types.h and implemented in fs_types.c
Common implementation can be found via commit:
bbe7449e2599 "fs: common implementation of file type"
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Move code to make it more readable, so as locking and unlocking is
done in the same function. The generic checks that are now performed in
the locked section are unaffected.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
BUG_ON(1) leads to bogus warnings from clang when
CONFIG_PROFILE_ANNOTATED_BRANCHES is set:
fs/btrfs/volumes.c:5041:3: error: variable 'max_chunk_size' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
BUG_ON(1);
^~~~~~~~~
include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
# define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/btrfs/volumes.c:5046:9: note: uninitialized use occurs here
max_chunk_size);
^~~~~~~~~~~~~~
include/linux/kernel.h:860:36: note: expanded from macro 'min'
#define min(x, y) __careful_cmp(x, y, <)
^
include/linux/kernel.h:853:17: note: expanded from macro '__careful_cmp'
__cmp_once(x, y, __UNIQUE_ID(__x), __UNIQUE_ID(__y), op))
^
include/linux/kernel.h:847:25: note: expanded from macro '__cmp_once'
typeof(y) unique_y = (y); \
^
fs/btrfs/volumes.c:5041:3: note: remove the 'if' if its condition is always true
BUG_ON(1);
^
include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^
fs/btrfs/volumes.c:4993:20: note: initialize the variable 'max_chunk_size' to silence this warning
u64 max_chunk_size;
^
= 0
Change it to BUG() so clang can see that this code path can never
continue.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The wrapper names better describe what's happening so they're not
deleted though they're trivial, but at least moved closer to their place
of use.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Long time ago (2008), the extent buffers were organized in a LRU list
and switched to rb-tree in 6af118ce51b52ced ("Btrfs: Index extent
buffers in an rbtree"). There was one stale macro definition left.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
- make the messages more visually consistent and use same format
"running ... test", any error or other warning can be easily spotted
- move some message to the test entry function
- add message to the inode tests
Example output:
[ 8.187391] Btrfs loaded, crc32c=crc32c-generic, assert=on, integrity-checker=on, ref-verify=on
[ 8.189476] BTRFS: selftest: sectorsize: 4096 nodesize: 4096
[ 8.190761] BTRFS: selftest: running btrfs free space cache tests
[ 8.192245] BTRFS: selftest: running extent only tests
[ 8.193573] BTRFS: selftest: running bitmap only tests
[ 8.194876] BTRFS: selftest: running bitmap and extent tests
[ 8.196166] BTRFS: selftest: running space stealing from bitmap to extent tests
[ 8.198026] BTRFS: selftest: running extent buffer operation tests
[ 8.199328] BTRFS: selftest: running btrfs_split_item tests
[ 8.200653] BTRFS: selftest: running extent I/O tests
[ 8.201808] BTRFS: selftest: running find delalloc tests
[ 8.320733] BTRFS: selftest: running extent buffer bitmap tests
[ 8.340795] BTRFS: selftest: running inode tests
[ 8.341766] BTRFS: selftest: running btrfs_get_extent tests
[ 8.342981] BTRFS: selftest: running hole first btrfs_get_extent test
[ 8.344342] BTRFS: selftest: running outstanding_extents tests
[ 8.345575] BTRFS: selftest: running qgroup tests
[ 8.346537] BTRFS: selftest: running qgroup add/remove tests
[ 8.347725] BTRFS: selftest: running qgroup multiple refs test
[ 8.354982] BTRFS: selftest: running free space tree tests
[ 8.372175] BTRFS: selftest: sectorsize: 4096 nodesize: 8192
[ 8.373539] BTRFS: selftest: running btrfs free space cache tests
[ 8.374989] BTRFS: selftest: running extent only tests
[ 8.376236] BTRFS: selftest: running bitmap only tests
[ 8.377483] BTRFS: selftest: running bitmap and extent tests
[ 8.378854] BTRFS: selftest: running space stealing from bitmap to extent tests
...
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The messages like 'extent I/O tests finished' are redundant, if the test
fails it's quite obvious in the log and hang is also noticeable. No
other then extent_io and free space tree tests print that so make it
consistent.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Comments about ranges did not match the code, the correct calculation is
to use start and start+len as the interval boundaries.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are a few unconverted constants that are not powers of two and
haven't been converted.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.com>
|
