summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-22ipv4: Don't reset ->flowi4_scope in ip_rt_fix_tos().Guillaume Nault
All callers already initialise ->flowi4_scope with RT_SCOPE_UNIVERSE, either by manual field assignment, memset(0) of the whole structure or implicit structure initialisation of on-stack variables (RT_SCOPE_UNIVERSE actually equals 0). Therefore, we don't need to always initialise ->flowi4_scope in ip_rt_fix_tos(). We only need to reduce the scope to RT_SCOPE_LINK when the special RTO_ONLINK flag is present in the tos. This will allow some code simplification, like removing ip_rt_fix_tos(). Also, the long term idea is to remove RTO_ONLINK entirely by properly initialising ->flowi4_scope, instead of overloading ->flowi4_tos with a special flag. Eventually, this will allow to convert ->flowi4_tos to dscp_t. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22Merge branch 'zynqmp-phy-config-optional'David S. Miller
Radhey Shyam Pandey says: ==================== net: macb: Make ZynqMP SGMII phy configuration optional This patchset drop phy-names property from MACB node and also make SGMII Phy configuration optional. The motivation for this change is to support traditional usescase in which first stage bootloader does PS-GT configuration, and should still be supported in macb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22net: macb: In ZynqMP initialization make SGMII phy configuration optionalRadhey Shyam Pandey
In the macb binding documentation "phys" is an optional property. Make implementation in line with it. This change allows the traditional flow in which first stage bootloader does PS-GT configuration to work along with newer use cases in which PS-GT configuration is managed by the phy-zynqmp driver. It fixes below macb probe failure when macb DT node doesn't have SGMII phys handle. "macb ff0b0000.ethernet: error -ENODEV: failed to get PS-GTR PHY" Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22dt-bindings: net: cdns,macb: Drop phy-names property for ZynqMP SGMII PHYRadhey Shyam Pandey
In zynqmp SGMII initialization, there is a single PHY so remove phy-names property as there is no real need of having it. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22Merge branch 'ipv6-only-sock'David S. Miller
Kuniyuki Iwashima says: ==================== ipv6: Use ipv6_only_sock helper function. The first patch removes __ipv6_only_sock(), and the second replaces ipv6only tests with ipv6_only_sock(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv6: Use ipv6_only_sock() helper in condition.Kuniyuki Iwashima
This patch replaces some sk_ipv6only tests with ipv6_only_sock(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv6: Remove __ipv6_only_sock().Kuniyuki Iwashima
Since commit 9fe516ba3fb2 ("inet: move ipv6only in sock_common"), ipv6_only_sock() and __ipv6_only_sock() are the same macro. Let's remove the one. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22USB2NET : SR9800 : change SR9800_BULKIN_SIZE from global to staticTom Rix
Smatch reports this issue sr9800.h:166:53: warning: symbol 'SR9800_BULKIN_SIZE' was not declared. Should it be static? Global variables should not be defined in header files. This only works because sr9800.h in only included by sr9800.c Change the storage-class specifier to static. And since it does not change add type qualifier const. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22Revert "rtnetlink: return EINVAL when request cannot succeed"Florent Fourcot
This reverts commit b6177d3240a4 ip-link command is testing kernel capability by sending a RTM_NEWLINK request, without any argument. It accepts everything in reply, except EOPNOTSUPP and EINVAL (functions iplink_have_newlink / accept_msg) So we must keep compatiblity here, invalid empty message should not return EINVAL Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Tested-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22nfp: support 802.1ad VLAN assingment to VFBaowen Zheng
The NFP driver already supports assignment of 802.1Q VLANs to VFs e.g. # ip link set $DEV vf $VF_NUM vlan $VLAN_ID [proto 802.1Q] This patch enhances the NFP driver to also allow assingment of 802.1ad VLANs to VFs. e.g. # ip link set $DEV vf $VF_NUM vlan $VLAN_ID proto 802.1ad Signed-off-by: Bin Chen <bin.chen@corigine.com> Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Yinjun Zhang <yunjin.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22net: ethernet: ti: am65-cpsw-ethtool: use pm_runtime_resume_and_getMinghao Chi
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22net/ipv6: Enforce limits for accept_unsolicited_na sysctlArun Ajith S
Fix mistake in the original patch where limits were specified but the handler didn't take care of the limits. Signed-off-by: Arun Ajith S <aajith@arista.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22myri10ge: remove redundant assignment to variable statusColin Ian King
Variable status is being assigned a value that is never read, it is being re-assigned again later on. The assignment is redundant and can be removed. Cleans up clang scan build warning: drivers/net/ethernet/myricom/myri10ge/myri10ge.c:582:7: warning: Although the value stored to 'status' is used in the enclosing expression, the value is never actually read from 'status' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22net: cdc-ncm: Move spin_lock_bh() to spin_lock()Yunbo Yu
It is unnecessary to call spin_lock_bh() for you are already in a tasklet. Signed-off-by: Yunbo Yu <yuyunbo519@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
drivers/net/ethernet/microchip/lan966x/lan966x_main.c d08ed852560e ("net: lan966x: Make sure to release ptp interrupt") c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-21Merge tag 'net-5.18-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from xfrm and can. Current release - regressions: - rxrpc: restore removed timer deletion Current release - new code bugs: - gre: fix device lookup for l3mdev use-case - xfrm: fix egress device lookup for l3mdev use-case Previous releases - regressions: - sched: cls_u32: fix netns refcount changes in u32_change() - smc: fix sock leak when release after smc_shutdown() - xfrm: limit skb_page_frag_refill use to a single page - eth: atlantic: invert deep par in pm functions, preventing null derefs - eth: stmmac: use readl_poll_timeout_atomic() in atomic state Previous releases - always broken: - gre: fix skb_under_panic on xmit - openvswitch: fix OOB access in reserve_sfa_size() - dsa: hellcreek: calculate checksums in tagger - eth: ice: fix crash in switchdev mode - eth: igc: - fix infinite loop in release_swfw_sync - fix scheduling while atomic" * tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) drivers: net: hippi: Fix deadlock in rr_close() selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets nfc: MAINTAINERS: add Bug entry net: stmmac: Use readl_poll_timeout_atomic() in atomic state doc/ip-sysctl: add bc_forwarding netlink: reset network and mac headers in netlink_dump() net: mscc: ocelot: fix broken IP multicast flooding net: dsa: hellcreek: Calculate checksums in tagger net: atlantic: invert deep par in pm functions, preventing null derefs can: isotp: stop timeout monitoring when no first frame was sent bonding: do not discard lowest hash bit for non layer3+4 hashing net: lan966x: Make sure to release ptp interrupt ipv6: make ip6_rt_gc_expire an atomic_t net: Handle l3mdev in ip_tunnel_init_flow l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu net/sched: cls_u32: fix possible leak in u32_init_knode() net/sched: cls_u32: fix netns refcount changes in u32_change() powerpc: Update MAINTAINERS for ibmvnic and VAS net: restore alpha order to Ethernet devices in config ...
2022-04-21libbpf: Remove redundant non-null checks on obj_elfGaosheng Cui
Obj_elf is already non-null checked at the function entry, so remove redundant non-null checks on obj_elf. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220421031803.2283974-1-cuigaosheng1@huawei.com
2022-04-21selftests/bpf: Fix map tests errno checksArtem Savkov
Switching to libbpf 1.0 API broke test_lpm_map and test_lru_map as error reporting changed. Instead of setting errno and returning -1 bpf calls now return -Exxx directly. Drop errno checks and look at return code directly. Fixes: b858ba8c52b6 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK") Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/bpf/20220421094320.1563570-1-asavkov@redhat.com
2022-04-21selftests/bpf: Fix prog_tests uprobe_autoattach compilation errorArtem Savkov
I am getting the following compilation error for prog_tests/uprobe_autoattach.c: tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c: In function ‘test_uprobe_autoattach’: ./test_progs.h:209:26: error: pointer ‘mem’ may be used after ‘free’ [-Werror=use-after-free] The value of mem is now used in one of the asserts, which is why it may be confusing compilers. However, it is not dereferenced. Silence this by moving free(mem) after the assert block. Fixes: 1717e248014c ("selftests/bpf: Uprobe tests should verify param/return values") Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220421132317.1583867-1-asavkov@redhat.com
2022-04-21selftests/bpf: Fix attach tests retcode checksArtem Savkov
Switching to libbpf 1.0 API broke test_sock and test_sysctl as they check for return of bpf_prog_attach to be exactly -1. Switch the check to '< 0' instead. Fixes: b858ba8c52b6 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK") Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/bpf/20220421130104.1582053-1-asavkov@redhat.com
2022-04-21i40e, xsk: Get rid of redundant 'fallthrough'Maciej Fijalkowski
Intel drivers translate actions returned from XDP programs to their own return codes that have the following mapping: XDP_REDIRECT -> I40E_XDP_{REDIR,CONSUMED} XDP_TX -> I40E_XDP_{TX,CONSUMED} XDP_DROP -> I40E_XDP_CONSUMED XDP_ABORTED -> I40E_XDP_CONSUMED XDP_PASS -> I40E_XDP_PASS Commit b8aef650e549 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") introduced new translation XDP_REDIRECT -> I40E_XDP_EXIT which is set when XSK RQ gets full and to indicate that driver should stop further Rx processing. This happens for unsuccessful xdp_do_redirect() so it is valuable to call trace_xdp_exception() for this case. In order to avoid I40E_XDP_EXIT -> IXGBE_XDP_CONSUMED overwrite, XDP_DROP case was moved above which in turn made the 'fallthrough' that is in XDP_ABORTED useless as it became the last label in the switch statement. Simply drop this leftover. Fixes: b8aef650e549 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220421132126.471515-3-maciej.fijalkowski@intel.com
2022-04-21ixgbe, xsk: Get rid of redundant 'fallthrough'Maciej Fijalkowski
Intel drivers translate actions returned from XDP programs to their own return codes that have the following mapping: XDP_REDIRECT -> IXGBE_XDP_{REDIR,CONSUMED} XDP_TX -> IXGBE_XDP_{TX,CONSUMED} XDP_DROP -> IXGBE_XDP_CONSUMED XDP_ABORTED -> IXGBE_XDP_CONSUMED XDP_PASS -> IXGBE_XDP_PASS Commit c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") introduced new translation XDP_REDIRECT -> IXGBE_XDP_EXIT which is set when XSK RQ gets full and to indicate that driver should stop further Rx processing. This happens for unsuccessful xdp_do_redirect() so it is valuable to call trace_xdp_exception() for this case. In order to avoid IXGBE_XDP_EXIT -> IXGBE_XDP_CONSUMED overwrite, XDP_DROP case was moved above which in turn made the 'fallthrough' that is in XDP_ABORTED useless as it became the last label in the switch statement. Simply drop this leftover. Fixes: c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220421132126.471515-2-maciej.fijalkowski@intel.com
2022-04-21bpf: Move check_ptr_off_reg before check_map_accessKumar Kartikeya Dwivedi
Some functions in next patch want to use this function, and those functions will be called by check_map_access, hence move it before check_map_access. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/bpf/20220415160354.1050687-3-memxor@gmail.com
2022-04-21bpf: Make btf_find_field more genericKumar Kartikeya Dwivedi
Next commit introduces field type 'kptr' whose kind will not be struct, but pointer, and it will not be limited to one offset, but multiple ones. Make existing btf_find_struct_field and btf_find_datasec_var functions amenable to use for finding kptrs in map value, by moving spin_lock and timer specific checks into their own function. The alignment, and name are checked before the function is called, so it is the last point where we can skip field or return an error before the next loop iteration happens. Size of the field and type is meant to be checked inside the function. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220415160354.1050687-2-memxor@gmail.com
2022-04-21libbpf: Add documentation to API functionsGrant Seltzer
This adds documentation for the following API functions: - bpf_program__set_expected_attach_type() - bpf_program__set_type() - bpf_program__set_attach_target() - bpf_program__attach() - bpf_program__pin() - bpf_program__unpin() Signed-off-by: Grant Seltzer <grantseltzer@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220420161226.86803-3-grantseltzer@gmail.com
2022-04-21libbpf: Update API functions usage to check errorGrant Seltzer
This updates usage of the following API functions within libbpf so their newly added error return is checked: - bpf_program__set_expected_attach_type() - bpf_program__set_type() Signed-off-by: Grant Seltzer <grantseltzer@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220420161226.86803-2-grantseltzer@gmail.com
2022-04-21libbpf: Add error returns to two API functionsGrant Seltzer
This adds an error return to the following API functions: - bpf_program__set_expected_attach_type() - bpf_program__set_type() In both cases, the error occurs when the BPF object has already been loaded when the function is called. In this case -EBUSY is returned. Signed-off-by: Grant Seltzer <grantseltzer@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220420161226.86803-1-grantseltzer@gmail.com
2022-04-21net: eql: Use kzalloc instead of kmalloc/memsetHaowen Bai
Use kzalloc rather than duplicating its implementation, which makes code simple and easy to understand. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1650277333-31090-1-git-send-email-baihaowen@meizu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-21drivers: net: davinci_mdio: using pm_runtime_resume_and_get instead of ↵Minghao Chi
pm_runtime_get_sync Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220418062921.2557884-1-chi.minghao@zte.com.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-21drivers: net: hippi: Fix deadlock in rr_close()Duoming Zhou
There is a deadlock in rr_close(), which is shown below: (Thread 1) | (Thread 2) | rr_open() rr_close() | add_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rr_timer() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-20samples/bpf: Reduce the sampling interval in xdp1_userZhengchao Shao
If interval is 2, and sum - prev[key] = 1, the result = 0. This will mislead the tester that the port has no traffic right now. So reduce the sampling interval to 1. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220419114746.291613-1-shaozhengchao@huawei.com
2022-04-20selftests/bpf: Add test for skb_load_bytesLiu Jian
Use bpf_prog_test_run_opts to test the skb_load_bytes function. Tests the behavior when offset is greater than INT_MAX or a normal value. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220416105801.88708-4-liujian56@huawei.com
2022-04-20net: Change skb_ensure_writable()'s write_len param to unsigned int typeLiu Jian
Both pskb_may_pull() and skb_clone_writable()'s length parameters are of type unsigned int already. Therefore, change this function's write_len param to unsigned int type. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220416105801.88708-3-liujian56@huawei.com
2022-04-20bpf: Enlarge offset check value to INT_MAX in bpf_skb_{load,store}_bytesLiu Jian
The data length of skb frags + frag_list may be greater than 0xffff, and skb_header_pointer can not handle negative offset. So, here INT_MAX is used to check the validity of offset. Add the same change to the related function skb_store_bytes. Fixes: 05c74e5e53f6 ("bpf: add bpf_skb_load_bytes helper") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220416105801.88708-2-liujian56@huawei.com
2022-04-20Merge tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull xtensa fixes from Max Filippov: - fix patching CPU selection in patch_text - fix potential deadlock in ISS platform serial driver - fix potential register clobbering in coprocessor exception handler * tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: fix a7 clobbering in coprocessor context load/store arch: xtensa: platforms: Fix deadlock in rs_close() xtensa: patch_text: Fixup last cpu should be master
2022-04-20Merge tag 'erofs-for-5.18-rc4-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "One patch to fix a use-after-free race related to the on-stack z_erofs_decompressqueue, which happens very rarely but needs to be fixed properly soon. The other patch fixes some sysfs Sphinx warnings" * tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors erofs: fix use-after-free of on-stack io[]
2022-04-20Revert "fs/pipe: use kvcalloc to allocate a pipe_buffer array"Linus Torvalds
This reverts commit 5a519c8fe4d620912385f94372fc8472fa98c662. It turns out that making the pipe almost arbitrarily large has some rather unexpected downsides. The kernel test robot reports a kernel warning that is due to pipe->max_usage now growing to the point where the iter_file_splice_write() buffer allocation can no longer be satisfied as a slab allocation, and the int nbufs = pipe->max_usage; struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec), GFP_KERNEL); code sequence there will now always fail as a result. That code could be modified to use kvcalloc() too, but I feel very uncomfortable making those kinds of changes for a very niche use case that really should have other options than make these kinds of fundamental changes to pipe behavior. Maybe the CRIU process dumping should be multi-threaded, and use multiple pipes and multiple cores, rather than try to use one larger pipe to minimize splice() calls. Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/all/20220420073717.GD16310@xsang-OptiPlex-9020/ Cc: Andrei Vagin <avagin@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-20x86: __memcpy_flushcache: fix wrong alignment if size > 2^32Mikulas Patocka
The first "if" condition in __memcpy_flushcache is supposed to align the "dest" variable to 8 bytes and copy data up to this alignment. However, this condition may misbehave if "size" is greater than 4GiB. The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both arguments to unsigned int and selects the smaller one. However, the cast truncates high bits in "size" and it results in misbehavior. For example: suppose that size == 0x100000001, dest == 0x200000002 min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1; ... dest += 0x1; so we copy just one byte "and" dest remains unaligned. This patch fixes the bug by replacing unsigned with size_t. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-20selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packetsIdo Schimmel
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packetsIdo Schimmel
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20Merge branch 'mlxsw-line-card-status-tracking'David S. Miller
Ido Schimmel says: ==================== mlxsw: Line cards status tracking When a line card is provisioned, netdevs corresponding to the ports found on the line card are registered. User space can then perform various logical configurations (e.g., splitting, setting MTU) on these netdevs. However, since the line card is not present / powered on (i.e., it is not in 'active' state), user space cannot access the various components found on the line card. For example, user space cannot read the temperature of gearboxes or transceiver modules found on the line card via hwmon / thermal. Similarly, it cannot dump the EEPROM contents of these transceiver modules. The above is only possible when the line card becomes active. This patchset solves the problem by tracking the status of each line card and invoking callbacks from interested parties when a line card becomes active / inactive. Patchset overview: Patch #1 adds the infrastructure in the line cards core that allows users to registers a set of callbacks that are invoked when a line card becomes active / inactive. To avoid races, if a line card is already active during registration, the got_active() callback is invoked. Patches #2-#3 are preparations. Patch #4 changes the port module core to register a set of callbacks with the line cards core. See detailed description with examples in the commit message. Patches #5-#6 do the same with regards to thermal / hwmon support, so that user space will be able to monitor the temperature of various components on the line card when it becomes active. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20mlxsw: core_hwmon: Add interfaces for line card initialization and ↵Vadim Pasternak
de-initialization Add callback functions for line card 'hwmon' initialization and de-initialization. Each line card is associated with the relevant 'hwmon' device, which may contain thermal attributes for the cages and gearboxes found on this line card. The line card 'hwmon' initialization / de-initialization APIs are to be called when line card is set to active / inactive state by got_active() / got_inactive() callbacks from line card state machine. For example cage temperature for module #9 located at line card #7 will be exposed by utility 'sensors' like: linecard#07 front panel 009: +32.0C (crit = +70.0C, emerg = +80.0C) And temperature for gearbox #3 located at line card #5 will be exposed like: linecard#05 gearbox 003: +41.0C (highest = +41.0C) Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20mlxsw: core_thermal: Add interfaces for line card initialization and ↵Vadim Pasternak
de-initialization Add callback functions for line card thermal area initialization and de-initialization. Each line card is associated with the relevant thermal area, which may contain thermal zones for cages and gearboxes found on this line card. The line card thermal initialization / de-initialization APIs are to be called when line card is set to active / inactive state by got_active() / got_inactive() callbacks from line card state machine. For example thermal zone for module #9 located at line card #7 will have type: mlxsw-lc7-module9. And thermal zone for gearbox #2 located at line card #5 will have type: mlxsw-lc5-gearbox2. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20mlxsw: core_env: Add interfaces for line card initialization and ↵Vadim Pasternak
de-initialization Netdevs for ports found on line cards are registered upon provisioning. However, user space is not allowed to access the transceiver modules found on a line card until the line card becomes active. Therefore, register event operations with the line card core to get notifications whenever a line card becomes active or inactive. When user space tries to dump the EEPROM of a transceiver module or reset it and the corresponding line card is inactive, emit an error message: ethtool -m enp1s0nl7p9 netlink error: mlxsw_core: Cannot read EEPROM of module on an inactive line card netlink error: Input/output error When user space tries to set the power mode policy of such a transceiver, cache the configuration and apply it when the line card becomes active. This is consistent with other port configuration (e.g., MTU setting) that user space is able to perform while the line card is provisioned, but inactive. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20mlxsw: core_env: Split module power mode setting to a separate functionVadim Pasternak
Move the code that applies the module power mode to the device to a separate function. This function will be invoked by the next patch to set the power mode on transceiver modules found on a line card when the line card becomes active. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20mlxsw: core: Add bus argument to environment init APIVadim Pasternak
Pass bus argument to mlxsw_env_init(). The purpose is to get access to device handle, which is to be provided to error message in case of line card activation failure. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20mlxsw: core_linecards: Introduce ops for linecards status change trackingJiri Pirko
Introduce an infrastructure allowing users to register a set of operations which are to be called whenever a line card gets active/inactive. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20nfc: MAINTAINERS: add Bug entryKrzysztof Kozlowski
Add a Bug section, indicating preferred mailing method for bug reports, to NFC Subsystem entry. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20Merge tag 'linux-can-next-for-5.19-20220419' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-04-19 this is a pull request of 17 patches for net-next/master. The first 2 patches are by me and target the CAN driver infrastructure. One patch renames a function in the rx_offload helper the other one updates the CAN bitrate calculation to prefer small bit rate pre-scalers over larger ones, which is encouraged by the CAN in Automation. Kris Bahnsen contributes a patch to fix the links to Technologic Systems web resources in the sja1000 driver. Christophe Leroy's patch prepares the mpc5xxx_can driver for upcoming powerpc header cleanup. Minghao Chi's patch converts the flexcan driver to use pm_runtime_resume_and_get(). The next 2 patches target the Xilinx CAN driver. Lukas Bulwahn's patch fixes an entry in the MAINTAINERS file. A patch by me marks the bit timing constants as const. Wolfram Sang's patch documents r8a77961 support on the renesas,rcar-canfd bindings document. The next 2 patches are by me and add support for the mcp251863 chip to the mcp251xfd driver. The last 7 patches are by Pavel Pisa, Martin Jerabek et al. and add the ctucanfd driver for the CTU CAN FD IP Core. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: stmmac: Use readl_poll_timeout_atomic() in atomic stateKevin Hao
The init_systime() may be invoked in atomic state. We have observed the following call trace when running "phc_ctl /dev/ptp0 set" on a Intel Agilex board. BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [<ffff80000892ef78>] stmmac_set_time+0x34/0x8c CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567 Hardware name: SoCFPGA Agilex SoCDK (DT) Call trace: dump_backtrace.part.0+0xc4/0xd0 show_stack+0x24/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x154/0x1c0 __might_sleep+0x58/0x90 init_systime+0x78/0x120 stmmac_set_time+0x64/0x8c ptp_clock_settime+0x60/0x9c pc_clock_settime+0x6c/0xc0 __arm64_sys_clock_settime+0x88/0xf0 invoke_syscall+0x5c/0x130 el0_svc_common.constprop.0+0x4c/0x100 do_el0_svc+0x7c/0xa0 el0_svc+0x58/0xcc el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 So we should use readl_poll_timeout_atomic() here instead of readl_poll_timeout(). Also adjust the delay time to 10us to fix a "__bad_udelay" build error reported by "kernel test robot <lkp@intel.com>". I have tested this on Intel Agilex and NXP S32G boards, there is no delay needed at all. So the 10us delay should be long enough for most cases. Fixes: ff8ed737860e ("net: stmmac: use readl_poll_timeout() function in init_systime()") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-20 01:01:39 +0000