Age | Commit message (Collapse) | Author |
|
Update Benjamin Gaignard address and remove it from no more maintained
drivers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://lore.kernel.org/r/20220113171921.17466-2-philippe.cornu@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Abderraouf Adjal <adjal.arf@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Fix the following warning from "make htmldocs":
drivers/gpu/drm/drm_privacy_screen.c:270:
WARNING: Inline emphasis start-string without end-string.
Fixes: 8a12b170558a ("drm/privacy-screen: Add notifier support (v2)")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://lore.kernel.org/r/20220207130407.389585-1-hdegoede@redhat.com
Link: https://patchwork.freedesktop.org/patch/msgid/20220207130407.389585-1-hdegoede@redhat.com
|
|
On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.
We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.
And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.
Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 15512021eb3975a8c2366e3883337e252bb0eee5)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b3dcc6dc0f32612d04839c2fb32e94d0ebf92c98)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Reintroduce the !join_mbus single pipe cases for adlp+.
Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.
This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit eef173954432fe0612acb63421a95deb41155cdc)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Architectures others than x86 have a stub implementation calling
WARN_ON_ONCE(). The appropriate headers need to be included, otherwise
the header-test target will fail with:
HDRTEST drivers/gpu/drm/i915/i915_mm.h
In file included from <command-line>:
./drivers/gpu/drm/i915/i915_mm.h: In function ‘remap_io_mapping’:
./drivers/gpu/drm/i915/i915_mm.h:26:2: error: implicit declaration of function ‘WARN_ON_ONCE’ [-Werror=implicit-function-declaration]
26 | WARN_ON_ONCE(1);
| ^~~~~~~~~~~~
v2: Do not include <linux/printk.h> since call to pr_err() has been
removed
Fixes: 67c430bbaae1 ("drm/i915: Skip remap_io_mapping() for non-x86 platforms")
Cc: Siva Mullati <siva.mullati@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Siva Mullati <siva.mullati@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131165926.3230642-3-lucas.demarchi@intel.com
(cherry picked from commit 377c675f3c17ffaefd023ee283bb366bbd6bbcea)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
The i915_ttm_accel_move() function may return error codes that should
be propagated further up the stack rather than consumed assuming that
the accel move failed and could be replaced with a memcpy move.
For -EINTR, -ERESTARTSYS and -EAGAIN, just propagate those codes, rather
than retrying with a memcpy move.
Fixes: 2b0a750caf33 ("drm/i915/ttm: Failsafe migration blits")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201070340.16457-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 29b9702ffe70d83b9970abbccaeb287dfda4409f)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Currently we allow DRRS on IVB PCH ports, but we're missing a
few programming steps meaning it is guaranteed to not work.
And on HSW DRRS is not supported on anything but port A ever
as only transcoder EDP has the M2/N2 registers (though I'm
not sure if HSW ever has eDP on any other port).
Starting from BDW all transcoders have the dynamically
reprogrammable M/N registers so DRRS could work on any
port.
Stop initializing DRRS on ports where it cannot possibly work.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit f0d4ce59f4d48622044933054a0e0cefa91ba15e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
We call __save_depot_stack() unconditionally so the stack depot
must always be initialized or else we'll oops on platforms without
runtime pm support.
Presumably we've not seen this in CI due to stack_depot_init()
already getting called via drm_mm_init()+CONFIG_DRM_DEBUG_MM.
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com> # stackdepot
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 2dba5eb1c73b ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126081539.23227-1-ville.syrjala@linux.intel.com
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 751a9d69b19702af35b0fedfb8ff362027c1cf0c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().
I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
Fixes: 28f922213886 ("net/smc: fix ref_tracker issue in smc_pnet_add()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable is assigned twice to the same value. Let's drop one.
Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220203151151.1270461-1-maxime@cerno.tech
|
|
The SocFPGA machine since commit b3ca9888f35f ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly. Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:
/usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: b3ca9888f35f ("reset: socfpga: add an early reset driver for SoCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
POSIX extensions require SMB3.1.1 (so improve the error
message when vers=3.0, 2.1 or 2.0 is specified on mount)
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move test_modules_return_* prototypes into a header file in order to
placate -Wmissing-prototypes.
Fixes: 90c5318795ee ("s390/module: test loading modules with a lot of relocations")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Now that Alexander Gordeev has volunteered to be a co-maintainer for
s390, I can act as a reviewer instead of being a maintainer for s390.
With Alexander, Heiko, and Vasily we are in really good shape.
I will continue to act as the maintainer for KVM on s390 together with
Janosch.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Change Alexander Gordeev's status so he is maintainer
instead of reviewer for s390.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There's list corruption on cgrp_cpuctx_list. This happens on the
following path:
perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
cpu_ctx_sched_in
ctx_sched_in
ctx_pinned_sched_in
merge_sched_in
perf_cgroup_event_disable: remove the event from the list
Use list_for_each_entry_safe() to allow removing an entry during
iteration.
Fixes: 058fe1c0440e ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org
|
|
Syzbot found a GPF in reweight_entity. This has been bisected to
commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid
sched_task_group")
There is a race between sched_post_fork() and setpriority(PRIO_PGRP)
within a thread group that causes a null-ptr-deref in
reweight_entity() in CFS. The scenario is that the main process spawns
number of new threads, which then call setpriority(PRIO_PGRP, 0, -20),
wait, and exit. For each of the new threads the copy_process() gets
invoked, which adds the new task_struct and calls sched_post_fork()
for it.
In the above scenario there is a possibility that
setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread
in the group that is just being created by copy_process(), and for
which the sched_post_fork() has not been executed yet. This will
trigger a null pointer dereference in reweight_entity(), as it will
try to access the run queue pointer, which hasn't been set.
Before the mentioned change the cfs_rq pointer for the task has been
set in sched_fork(), which is called much earlier in copy_process(),
before the new task is added to the thread_group. Now it is done in
the sched_post_fork(), which is called after that. To fix the issue
the remove the update_load param from the update_load param() function
and call reweight_task() only if the task flag doesn't have the
TASK_NEW flag set.
Fixes: 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group")
Reported-by: syzbot+af7a719bc92395ee41b3@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220203161846.1160750-1-tadeusz.struk@linaro.org
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before
creating the maps.
- Return error if procfs isn't mounted for PID namespaces when
synthesizing records for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid
garbling the screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part
got into 5.17.
- Check for NULL pointer before dereference writing debug info about a
sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf ftrace: system_wide collection is not effective by default
libperf: Add arm64 support to perf_mmap__read_self()
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf stat: Fix display of grouped aliased events
perf tools: Apply correct label to user/kernel symbols in branch mode
perf bpf: Fix a typo in bpf_counter_cgroup.c
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
perf session: Check for NULL pointer before dereference
perf annotate: Set error stream of objdump process for TUI
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
"Fix a potential truncated string warning triggered by gcc12"
* tag 'objtool_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix truncated string warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
"Remove a bogus warning introduced by the recent PCI MSI irq affinity
overhaul"
* tag 'irq_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Remove bogus warning in pci_irq_get_affinity()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix altera and xgene EDAC drivers to propagate the correct error code
from platform_get_irq() so that deferred probing still works"
* tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix deferred probing
EDAC/altera: Fix deferred probing
|
|
The ftrace.target.system_wide must be set before invoking
evlist__create_maps(), otherwise it has no effect.
Fixes: 53be50282269b46c ("perf ftrace: Add 'latency' subcommand")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127132010.4836-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Cinterion MV31-W, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Link: https://lore.kernel.org/r/20220119102519.5342-1-slark_xiao@163.com
[mani: Modified the commit message to reflect Cinterion MV31-W and CCed stable]
Fixes: 87693e092bd0 ("bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHI")
Cc: stable@vger.kernel.org # v5.14 +
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For default mechanism, product would use default MRU 3500 if
they didn't define it. But for Foxconn SDX55, there is a known
issue which MRU 3500 would lead to data connection lost.
So we align it with Qualcomm default MRU settings.
Link: https://lore.kernel.org/r/20220119101213.5008-1-slark_xiao@163.com
[mani: Added pci_generic prefix to subject and CCed stable]
Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support")
Cc: stable@vger.kernel.org # v5.12+
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220205135731.157871-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the arm64 variants for read_perf_counter() and read_timestamp().
Unfortunately the counter number is encoded into the instruction, so the
code is a bit verbose to enumerate all possible counters.
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220201214056.702854-1-robh@kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
Picking the changes from:
06feec6005c9d950 ("ASoC: hdmi-codec: Fix OOB memory accesses")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An event may have a number of uncore aliases that when added to the
evlist are consecutive.
If there are multiple uncore events in a group then
parse_events__set_leader_for_uncore_aliase will reorder the evlist so
that events on the same PMU are adjacent.
The collect_all_aliases function assumes that aliases are in blocks so
that only the first counter is printed and all others are marked merged.
The reordering for groups breaks the assumption and so all counts are
printed.
This change removes the assumption from collect_all_aliases
that the events are in blocks and instead processes the entire evlist.
Before:
```
$ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1
Performance counter stats for 'system wide':
CPU0 256,866 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 494,413 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 967 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,738 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 285,161 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 429,920 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,443 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 310,753 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 416,657 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,231 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,573 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 416,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 405,966 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,481 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,447 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 312,911 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 408,154 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,086 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,380 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 333,994 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 370,349 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,287 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,335 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 188,107 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 302,423 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 701 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,070 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 307,221 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 383,642 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,036 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,158 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 318,479 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 821,545 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,028 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,550 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 227,618 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 372,272 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 903 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 376,783 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 419,827 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,406 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,453 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 286,583 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 429,956 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 999 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,436 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 313,867 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 370,159 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,114 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 409,111 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,399 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,684 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 365,828 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 376,037 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,378 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,411 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 382,456 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 621,743 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,232 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,316 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 385,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,176 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,268 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 373,588 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 386,163 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,394 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,464 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 381,206 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 546,891 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,266 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,712 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 221,176 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 392,069 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 831 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 355,401 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 705,595 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,235 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,216 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 371,436 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 428,103 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,306 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,442 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 384,352 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 504,200 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,468 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,860 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 228,856 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 287,976 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 832 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,060 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 215,121 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 334,162 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 681 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,026 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 296,179 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 436,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,084 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,525 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 262,296 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 416,573 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 986 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,533 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 285,852 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 359,842 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,073 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,326 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 303,379 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 367,222 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,008 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,156 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 273,487 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 425,449 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 932 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,367 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 297,596 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 414,793 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,140 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,601 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 342,365 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 360,422 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,342 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 327,196 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 580,858 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,122 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,014 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 296,564 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 452,817 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,087 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,694 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 375,002 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 389,393 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,478 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 1,540 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 365,213 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 594,685 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 1,401 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 2,222 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 1,000,749,060 ns duration_time
1.000749060 seconds time elapsed
```
After:
```
Performance counter stats for 'system wide':
CPU0 20,547,434 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU36 45,202,862 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE
CPU0 82,001 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU36 159,688 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE
CPU0 1,000,464,828 ns duration_time
1.000464828 seconds time elapsed
```
Fixes: 3cdc5c2cb924acb4 ("perf parse-events: Handle uncore event aliases in small groups properly")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Asaf Yaffe <asaf.yaffe@intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220205010941.1065469-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In branch mode, the branch symbols were being displayed with incorrect
cpumode labels. So fix this.
For example, before:
# perf record -b -a -- sleep 1
# perf report -b
Overhead Command Source Shared Object Source Symbol Target Symbol
0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state
==> 0.08% cmd0 [kernel.kallsyms] [.] psi_group_change [.] psi_group_change
0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change
After:
# perf report -b
Overhead Command Source Shared Object Source Symbol Target Symbol
0.08% swapper [kernel.kallsyms] [k] rcu_idle_enter [k] cpuidle_enter_state
0.08% cmd0 [kernel.kallsyms] [k] psi_group_change [k] pei_group_change
0.08% cmd1 [kernel.kallsyms] [k] psi_group_change [k] psi_group_change
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220126105927.3411216-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch fixes a spelling typo in error message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211225005558.503935-1-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For perf recording, it retrieves process info by iterating nodes in proc
fs. If we run perf in a non-root PID namespace with command:
# unshare --fork --pid perf record -e cycles -a -- test_program
... in this case, unshare command creates a child PID namespace and
launches perf tool in it, but the issue is the proc fs is not mounted
for the non-root PID namespace, this leads to the perf tool gathering
process info from its parent PID namespace.
We can use below command to observe the process nodes under proc fs:
# unshare --pid --fork ls /proc
1 137 1968 2128 3 342 48 62 78 crypto kcore net uptime
10 138 2 2142 30 35 49 63 8 devices keys pagetypeinfo version
11 139 20 2143 304 36 50 64 82 device-tree key-users partitions vmallocinfo
12 14 2011 22 305 37 51 65 83 diskstats kmsg self vmstat
128 140 2038 23 307 39 52 656 84 driver kpagecgroup slabinfo zoneinfo
129 15 2074 24 309 4 53 67 9 execdomains kpagecount softirqs
13 16 2094 241 31 40 54 68 asound fb kpageflags stat
130 164 2096 242 310 41 55 69 buddyinfo filesystems loadavg swaps
131 17 2098 25 317 42 56 70 bus fs locks sys
132 175 21 26 32 43 57 71 cgroups interrupts meminfo sysrq-trigger
133 179 2102 263 329 44 58 75 cmdline iomem misc sysvipc
134 1875 2103 27 330 45 59 76 config.gz ioports modules thread-self
135 19 2117 29 333 46 6 77 consoles irq mounts timer_list
136 1941 2121 298 34 47 60 773 cpuinfo kallsyms mtd tty
So it shows many existed tasks, since unshared command has not mounted
the proc fs for the new created PID namespace, it still accesses the
proc fs of the root PID namespace. This leads to two prominent issues:
- Firstly, PID values are mismatched between thread info and samples.
The gathered thread info are coming from the proc fs of the root PID
namespace, but samples record its PID from the child PID namespace.
- The second issue is profiled program 'test_program' returns its forked
PID number from the child PID namespace, perf tool wrongly uses this
PID number to retrieve the process info via the proc fs of the root
PID namespace.
To avoid issues, we need to mount proc fs for the child PID namespace
with the option '--mount-proc' when use unshare command:
# unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program
Conversely, when the proc fs of the root PID namespace is used by child
namespace, perf tool can detect the multiple PID levels and
nsinfo__is_in_root_namespace() returns false, this patch reports error
for this case:
# unshare --fork --pid perf record -e cycles -a -- test_program
Couldn't synthesize bpf events.
Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace.
Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20211224124014.2492751-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move NULL pointer check before dereferencing the variable.
Addresses-Coverity: 1497622 ("Derereference before null check")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/20220125121141.18347-1-amhamza.mgc@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The stderr should be set to a pipe when using TUI. Otherwise it'd
print to stdout and break TUI windows with an error message.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This updates branch sample type with missing PERF_SAMPLE_BRANCH_TYPE_SAVE.
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/1643799443-15109-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
f6c6804c43fa18d3 ("kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Yf+4k5Fs5Q3HdSG9@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To check if more kernel API sync is needed and also to see if the perf
build tests continue to pass.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I added the netdev_tracker_alloc() right after ndev was
stored into the newly allocated object:
new_pe->ndev = ndev;
if (ndev)
netdev_tracker_alloc(ndev, &new_pe->dev_tracker, GFP_KERNEL);
But I missed that later, we could end up freeing new_pe,
then calling dev_put(ndev) to release the reference on ndev.
The new_pe->dev_tracker would not be freed.
To solve this issue, move the netdev_tracker_alloc() call to
the point we know for sure new_pe will be kept.
syzbot report (on net-next tree, but the bug is present in net tree)
WARNING: CPU: 0 PID: 6019 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 6019 Comm: syz-executor.3 Not tainted 5.17.0-rc2-syzkaller-00650-g5a8fb33e5305 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d f4 70 a0 09 31 ff 89 de e8 4d bc 99 fd 84 db 75 e0 e8 64 b8 99 fd 48 c7 c7 20 0c 06 8a c6 05 d4 70 a0 09 01 e8 9e 4e 28 05 <0f> 0b eb c4 e8 48 b8 99 fd 0f b6 1d c3 70 a0 09 31 ff 89 de e8 18
RSP: 0018:ffffc900043b7400 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815fb318 RDI: fffff52000876e72
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f507e R11: 0000000000000000 R12: 1ffff92000876e85
R13: 0000000000000000 R14: ffff88805c1c6600 R15: 0000000000000000
FS: 00007f1ef6feb700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2d02b000 CR3: 00000000223f4000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
ref_tracker_free+0x53f/0x6c0 lib/ref_tracker.c:119
netdev_tracker_free include/linux/netdevice.h:3867 [inline]
dev_put_track include/linux/netdevice.h:3884 [inline]
dev_put_track include/linux/netdevice.h:3880 [inline]
dev_put include/linux/netdevice.h:3910 [inline]
smc_pnet_add_eth net/smc/smc_pnet.c:399 [inline]
smc_pnet_enter net/smc/smc_pnet.c:493 [inline]
smc_pnet_add+0x5fc/0x15f0 net/smc/smc_pnet.c:556
genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731
genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: b60645248af3 ("net/smc: add net device tracker to struct smc_pnetentry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.
Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the function panel_simple_probe() the pointer panel->desc is
assigned to the passed pointer desc. If function panel_dpi_probe()
is called panel->desc will be updated, but further on only desc
will be evaluated. So update the desc pointer to be able to use
the data from the function panel_dpi_probe().
Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- documentation fixes related to Xen
- enable x2apic mode when available when running as hardware
virtualized guest under Xen
- cleanup and fix a corner case of vcpu enumeration when running a
paravirtualized Xen guest
* tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/Xen: streamline (and fix) PV CPU enumeration
xen: update missing ioctl magic numers documentation
Improve docs for IOCTL_GNTDEV_MAP_GRANT_REF
xen: xenbus_dev.h: delete incorrect file name
xen/x2apic: enable x2apic mode when supported for HVM
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- A couple of fixes when handling an exception while a SError has
been delivered
- Workaround for Cortex-A510's single-step erratum
RISC-V:
- Make CY, TM, and IR counters accessible in VU mode
- Fix SBI implementation version
x86:
- Report deprecation of x87 features in supported CPUID
- Preparation for fixing an interrupt delivery race on AMD hardware
- Sparse fix
All except POWER and s390:
- Rework guest entry code to correctly mark noinstr areas and fix
vtime' accounting (for x86, this was already mostly correct but not
entirely; for ARM, MIPS and RISC-V it wasn't)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
KVM: x86: Report deprecated x87 features in supported CPUID
KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
KVM: arm64: Avoid consuming a stale esr value when SError occur
RISC-V: KVM: Fix SBI implementation version
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
kvm/riscv: rework guest entry logic
kvm/arm64: rework guest entry logic
kvm/x86: rework guest entry logic
kvm/mips: rework guest entry logic
kvm: add guest_state_{enter,exit}_irqoff()
KVM: x86: Move delivery of non-APICv interrupt into vendor code
kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
|
|
Pull xfs fixes from Darrick Wong:
"I was auditing operations in XFS that clear file privileges, and
realized that XFS' fallocate implementation drops suid/sgid but
doesn't clear file capabilities the same way that file writes and
reflink do.
There are VFS helpers that do it correctly, so refactor XFS to use
them. I also noticed that we weren't flushing the log at the correct
point in the fallocate operation, so that's fixed too.
Summary:
- Fix fallocate so that it drops all file privileges when files are
modified instead of open-coding that incompletely.
- Fix fallocate to flush the log if the caller wanted synchronous
file updates"
* tag 'xfs-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: ensure log flush at the end of a synchronous fallocate call
xfs: move xfs_update_prealloc_flags() to xfs_pnfs.c
xfs: set prealloc flag in xfs_alloc_file_space()
xfs: fallocate() should call file_modified()
xfs: remove XFS_PREALLOC_SYNC
xfs: reject crazy array sizes being fed to XFS_IOC_GETBMAP*
|
|
Pull vfs fixes from Darrick Wong:
"I was auditing the sync_fs code paths recently and noticed that most
callers of ->sync_fs ignore its return value (and many implementations
never return nonzero even if the fs is broken!), which means that
internal fs errors and corruption are not passed up to userspace
callers of syncfs(2) or FIFREEZE. Hence fixing the common code and
XFS, and I'll start working on the ext4/btrfs folks if this is merged.
Summary:
- Fix a bug where callers of ->sync_fs (e.g. sync_filesystem and
syncfs(2)) ignore the return value.
- Fix a bug where callers of sync_filesystem (e.g. fs freeze) ignore
the return value.
- Fix a bug in XFS where xfs_fs_sync_fs never passed back error
returns"
* tag 'vfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: return errors in xfs_fs_sync_fs
quota: make dquot_quota_sync return errors from ->sync_fs
vfs: make sync_filesystem return errors from ->sync_fs
vfs: make freeze_super abort when sync_filesystem returns error
|
|
Pull iomap fix from Darrick Wong:
"A single bugfix for iomap.
The fix should eliminate occasional complaints about stall warnings
when a lot of writeback IO completes all at once and we have to then
go clearing status on a large number of folios.
Summary:
- Limit the length of ioend chains in writeback so that we don't trip
the softlockup watchdog and to limit long tail latency on clearing
PageWriteback"
* tag 'iomap-5.17-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs, iomap: limit individual ioend chain lengths in writeback
|
|
The filters for the PTP trap keys are incorrectly configured, in the
sense that is2_entry_set() only looks at trap->key.ipv4.dport or
trap->key.ipv6.dport if trap->key.ipv4.proto or trap->key.ipv6.proto is
set to IPPROTO_TCP or IPPROTO_UDP.
But we don't do that, so is2_entry_set() goes through the "else" branch
of the IP protocol check, and ends up installing a rule for "Any IP
protocol match" (because msk is also 0). The UDP port is ignored.
This means that when we run "ptp4l -i swp0 -4", all IP traffic is
trapped to the CPU, which hinders bridging.
Fix this by specifying the IP protocol in the VCAP IS2 filters for PTP
over UDP.
Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy: fixes for 5.17
Fixes for bunch of drivers:
- clk params for dphy
- arg fix for mtk-tphy
- refcount leak fix for stm32
- bus width fix for zynqmp
- sentinel fix ti
- PHY_BRCM_USB Kconfig fix
- clk fix for usb phy
* tag 'phy-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: dphy: Correct clk_pre parameter
phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
phy: xilinx: zynqmp: Fix bus width setting for SGMII
phy: cadence: Sierra: fix error handling bugs in probe()
phy: ti: Fix missing sentinel for clk_div_table
phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
phy: usb: Leave some clocks running during suspend
|