summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-04ALSA: hda/realtek - remove hp_automute_hook from alc283_fixup_chromebookKailang Yang
I forgot to remove the hp_automute_hook from alc283_fixup_chromebook. It doesn't need this for other chrome os machine. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-12-03Btrfs: update the MAINTAINERS fileChris Mason
Josef and I have new email addresses Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
2013-12-03x86-64, build: Always pass in -mno-sseH. Peter Anvin
Always pass in the -mno-sse argument, regardless if -preferred-stack-boundary is supported. We never want to generate SSE instructions in the kernel unless we *really* know what we're doing. According to H. J. Lu, any version of gcc new enough that we support it at all should handle the -mno-sse option, so just add it unconditionally. Reported-by: Kevin B. Smith <kevin.b.smith@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: H. J. Lu <hjl.tools@gmail.com> Link: http://lkml.kernel.org/n/tip-j21wzqv790q834n7yc6g80j1@git.kernel.org Cc: <stable@vger.kernel.org> # build fix only
2013-12-03parisc: update 64bit defconfigs and use SIL680 instead of SIIMAGE driverHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-12-03arm: dts: socfpga: Change some clocks of gate-clk type to perip-clkDinh Nguyen
Some of the clocks that were designated gate-clk do not have a gate, so change those clocks to be of periph-clk type. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03arm: socfpga: Enable ARM_TWD for socfpgaDinh Nguyen
Update Kconfig to enable TWD. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03blk-mq: fix dereference of rq->mq_ctx if allocation failsJeff Moyer
If __GFP_WAIT isn't set and we fail allocating, when we go to drop the reference on the ctx, we will attempt to dereference the NULL rq. Fix that. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-12-03cpuidle: Check for dev before deregistering it.Konrad Rzeszutek Wilk
If not, we could end up in the unfortunate situation where we dereference a NULL pointer b/c we have cpuidle disabled. This is the case when booting under Xen (which uses the ACPI P/C states but disables the CPU idle driver) - and can be easily reproduced when booting with cpuidle.off=1. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8156db4a>] cpuidle_unregister_device+0x2a/0x90 .. snip.. Call Trace: [<ffffffff813b15b4>] acpi_processor_power_exit+0x3c/0x5c [<ffffffff813af0a9>] acpi_processor_stop+0x61/0xb6 [<ffffffff814215bf>] __device_release_driver+0fffff81421653>] device_release_driver+0x23/0x30 [<ffffffff81420ed8>] bus_remove_device+0x108/0x180 [<ffffffff8141d9d9>] device_del+0x129/0x1c0 [<ffffffff813cb4b0>] ? unregister_xenbus_watch+0x1f0/0x1f0 [<ffffffff8141da8e>] device_unregister+0x1e/0x60 [<ffffffff814243e9>] unregister_cpu+0x39/0x60 [<ffffffff81019e03>] arch_unregister_cpu+0x23/0x30 [<ffffffff813c3c51>] handle_vcpu_hotplug_event+0xc1/0xe0 [<ffffffff813cb4f5>] xenwatch_thread+0x45/0x120 [<ffffffff810af010>] ? abort_exclusive_wait+0xb0/0xb0 [<ffffffff8108ec42>] kthread+0xd2/0xf0 [<ffffffff8108eb70>] ? kthread_create_on_node+0x180/0x180 [<ffffffff816ce17c>] ret_from_fork+0x7c/0xb0 [<ffffffff8108eb70>] ? kthread_create_on_node+0x180/0x180 This problem also appears in 3.12 and could be a candidate for backport. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-03ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16Olof Johansson
Enable MMC/SD on the Broadcom mobile platforms, and increase the block minors from the default 8 to 16 (since the Broadcom board by default has root on the 8th partition). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org # v3.12
2013-12-03ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot supportOlof Johansson
This enables a few more options on the sunxi defconfigs such that I can use nfsroot to boot them (there is no local storage support yet). It also enables PRINTK_TIME and tmpfs since it's a common distro requirement. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03Merge tag 'omap-for-v3.13/more-dt-regressions' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more legacy booting vs device tree booting fixes that people have noticed while booting things with device tree for things like omap4 WLAN, smsc911x, and beagle audio. Hopefully this will be it for the legacy booting vs device tree fixes for this -rc cycle. * tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix the name of supplies for smsc911x shared by OMAP ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm ARM: dts: omap3-beagle: Add omap-twl4030 audio support ARM: dts: omap4-sdp: Fix pin muxing for wl12xx ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
2013-12-03ARM: multi_v7_defconfig: enable network for BeagleBone BlackOlof Johansson
BeagleBone Black uses the TI CPSW ethernet controller, enable it in the multi_v7_defconfig for testing coverage purposes. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v3.12
2013-12-03Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
From Nicolas Ferre: AT91: second round of fixes for 3.13 - reduce IP frequency for I2C on sama5d3 - missing aliases directive for USART3 on 9x5 family - a PM symbol is missing if !CONFIG_PM * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM ARM: at91: add usart3 alias to dtsi ARM: at91: sama5d3: reduce TWI internal clock frequency
2013-12-03Merge tag 'mvebu-dt-fixes-3.13' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson
fixes From Jason Cooper, mvebu DT fixes for v3.13: - mvebu - PCIe fixes now that we have test devices with more ports. - fix access to coherency registers * tag 'mvebu-dt-fixes-3.13' of git://git.infradead.org/linux-mvebu: ARM: mvebu: re-enable PCIe on Armada 370 DB ARM: mvebu: use the virtual CPU registers to access coherency registers ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260 ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable
2013-12-03Merge tag 'omap-for-v3.13/fixes-against-rc1-take2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Some omap related fixes that have come up with people moving to device tree only based booting for omap2+. The series contains a handful of fixes for the igep boards as they were one of the first omap3 boards to jump over completely to device tree based booting. So these can be considered regressions compared to booting igep in legacy mode with board files in v3.12. Also included are few other device tree vs legacy booting regressions: - yet more missing omap3 .dtsi entries that have showed up booting various boards with device tree only - n900 eMMC device tree fix - fixes for beagle USB EHCI - two fixes to make omap2420 MMC work As we're moving omap2+ to be device tree only for v3.14, I'd like to have v3.13 work equally well for legacy based booting and device tree based booting. So there will be likely few more device tree related booting patches trickling in. This series also includes a regression fix for the omap timer posted mode that may wrongly stay on from the bootloader for some SoCs. * tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: mmc: omap: Fix I2C dependency and make driver usable with device tree mmc: omap: Fix DMA configuration to not rely on device id ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi ARM: dts: AM33XX IGEP0033: add USB support ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support ARM: dts: AM33XX BASE0033: add pinmux and user led support ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display ARM: dts: omap3-igep0020: Add pinmuxing for DVI output ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO ARM: dts: omap3-igep: Fix bus-width for mmc1 ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus ARM: OMAP2+: Disable POSTED mode for errata i103 and i767 ARM: OMAP2+: Fix eMMC on n900 with device tree ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig ARM: OMAP2+: Fix more missing data for omap3.dtsi file Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-03Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/atmel', ↵Mark Brown
'asoc/fix/fsl', 'asoc/fix/kirkwood', 'asoc/fix/omap', 'asoc/fix/rcar', 'asoc/fix/wm8731' and 'asoc/fix/wm8990' into asoc-linus
2013-12-03Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown
2013-12-03Merge remote-tracking branch 'asoc/fix/core' into asoc-linusMark Brown
2013-12-03ASoC: wm8731: fix dsp mode configurationBo Shen
According to WM8731 "PD, Rev 4.9 October 2012" datasheet, when it works in DSP mode A, LRP = 1, while works in DSP mode B, LRP = 0. So, fix LRP for DSP mode as the datesheet specification. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-03[SCSI] bfa: Fix crash when symb name set for offline vportVijaya Mohan Guvva
This patch fixes a crash when tried setting symbolic name for an offline vport through sysfs. Crash is due to uninitialized pointer lport->ns, which gets initialized only on linkup (port online). Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-03epoll: drop EPOLLWAKEUP if PM_SLEEP is disabledAmit Pundir
Drop EPOLLWAKEUP from epoll events mask if CONFIG_PM_SLEEP is disabled. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-03cpufreq: fix garbage kobjects on errors during suspend/resumeBjørn Mork
This is effectively a revert of commit 5302c3fb2e62 ("cpufreq: Perform light-weight init/teardown during suspend/resume"), which enabled suspend/resume optimizations leaving the sysfs files in place. Errors during suspend/resume are not handled properly, leaving dead sysfs attributes in case of failures. There are are number of functions with special code for the "frozen" case, and all these need to also have special error handling. The problem is easy to demonstrate by making cpufreq_driver->init() or cpufreq_driver->get() fail during resume. The code is too complex for a simple fix, with split code paths in multiple blocks within a number of functions. It is therefore best to revert the patch enabling this code until the error handling is in place. Examples of problems resulting from resume errors: WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212() missing sysfs attribute operations for kobject: (null) Modules linked in: [stripped as irrelevant] CPU: 0 PID: 6055 Comm: grep Tainted: G D 3.13.0-rc2 #153 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310 Call Trace: [<ffffffff81380b0e>] dump_stack+0x55/0x76 [<ffffffff81038635>] warn_slowpath_common+0x7c/0x96 [<ffffffff811823c7>] ? sysfs_open_file+0x77/0x212 [<ffffffff810386e3>] warn_slowpath_fmt+0x41/0x43 [<ffffffff81182dec>] ? sysfs_get_active+0x6b/0x82 [<ffffffff81182382>] ? sysfs_open_file+0x32/0x212 [<ffffffff811823c7>] sysfs_open_file+0x77/0x212 [<ffffffff81182350>] ? sysfs_schedule_callback+0x1ac/0x1ac [<ffffffff81122562>] do_dentry_open+0x17c/0x257 [<ffffffff8112267e>] finish_open+0x41/0x4f [<ffffffff81130225>] do_last+0x80c/0x9ba [<ffffffff8112dbbd>] ? inode_permission+0x40/0x42 [<ffffffff81130606>] path_openat+0x233/0x4a1 [<ffffffff81130b7e>] do_filp_open+0x35/0x85 [<ffffffff8113b787>] ? __alloc_fd+0x172/0x184 [<ffffffff811232ea>] do_sys_open+0x6b/0xfa [<ffffffff811233a7>] SyS_openat+0xf/0x11 [<ffffffff8138c812>] system_call_fastpath+0x16/0x1b The failure to restore cpufreq devices on cancelled hibernation is not a new bug. It is caused by the ACPI _PPC call failing unless the hibernate is completed. This makes the acpi_cpufreq driver fail its init. Previously, the cpufreq device could be restored by offlining the cpu temporarily. And as a complete hibernation cycle would do this, it would be automatically restored most of the time. But after commit 5302c3fb2e62 the leftover sysfs attributes will block any device add action. Therefore offlining and onlining CPU 1 will no longer restore the cpufreq object, and a complete suspend/resume cycle will replace it with garbage. Fixes: 5302c3fb2e62 ("cpufreq: Perform light-weight init/teardown during suspend/resume") Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-03gpio: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpiolib: change a warning to debug message when failing to get gpioHeikki Krogerus
It's the drivers responsibility to react on failure to get the gpio descriptors and not the frameworks. Since there are some common peripherals that may or may not have certain pins connected to gpio lines, depending on the platform, printing the warning there may end up generating useless bug reports. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536Liu Gang
For MPC8572/MPC8536, the status of GPIOs defined as output cannot be determined by reading GPDAT register, so the code use shadow data register instead. But the code may give the wrong status of GPIOs defined as input under some scenarios: 1. If some pins were configured as inputs and were asserted high before booting the kernel, the shadow data has been initialized with those pin values. 2. Some pins have been configured as output first and have been set to the high value, then reconfigured as input. The above cases will make the shadow data for those input pins to be set to high. Then reading the pin status will always return high even if the actual pin status is low. The code should eliminate the effects of the shadow data to the input pins, and the status of those pins should be read directly from GPDAT. Cc: stable@vger.kernel.org Acked-by: Scott Wood <scottwood@freescale.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpiolib: use platform GPIO mappings as fallbackAlexandre Courbot
For platforms that use device tree or ACPI as the standard way to look GPIOs up, allow the platform-defined GPIO mappings to be used as a fallback. This may be useful for platforms that need extra GPIOs mappings not defined by the firmware. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03Documentation: gpiolib: add 00-INDEX fileAlexandre Courbot
Give a short overview of the various GPIO documentation files. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpiolib: fix lookup of platform-mapped GPIOsAlexandre Courbot
A typo resulted in GPIO lookup failing unconditionally. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reported-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpiolib: add missing declarationsAlexandre Courbot
Add declaration of 'struct of_phandle_args' to avoid the following warning: In file included from arch/arm/mach-tegra/board-paz00.c:21:0: include/linux/gpio/driver.h:102:17: warning: 'struct of_phandle_args' declared inside parameter list include/linux/gpio/driver.h:102:17: warning: its scope is only this definition or declaration, which is probably not what you want Also proactively add other definitions/includes that could be missing in other contexts. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reported-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio: Add MOXA ART GPIO driverJonas Jensen
Add GPIO driver for MOXA ART SoCs. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio: rcar: Add r8a7791 support to the DT bindingsLaurent Pinchart
The r8a7791 (R-Car M2) has a GPIO controller with additional features compared to the generic renesas,gpio-rcar compatible devices. Add a model-specific string to let the driver enable these features. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio: rcar: Support both edge trigger with DTLaurent Pinchart
Some versions of the R-Car GPIO controller support triggering on both edges of the input signal. Whether this capability is supported is currently specified in platform data. R-Car GPIO devices instantiated from the device tree have the capability turned off even when the hardware supports it. To fix this, add DT match data support to the driver, initialize both edge trigger support from match data and enable both edge trigger in r8a7790 and r8a7791 match data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio-lynxpoint: Allow building as a moduleJean Delvare
Change CONFIG_GPIO_LYNXPOINT from bool to tristate so that the gpio-lynxpoint driver can be built as a module. Add the required glue: an exit function to unregister the driver, and module information. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03ARM: mv78xx0: delete local <mach/gpio.h> headerLinus Walleij
This header is not used by anything, and since the arch does not specify NEED_MACH_GPIO_H it is not included into <linux/gpio.h> either. Delete it. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03ARM: lpc32xx: move custom GPIO headerLinus Walleij
Move <mach/gpio-lpc32xx.h> to <linux/platform_data/gpio-lpc32xx.h>. Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03ARM: lpc32xx: delete local <mach/gpio.h> headerLinus Walleij
This header is not used by anything, and since the arch does not specify NEED_MACH_GPIO_H it is not included into <linux/gpio.h> either. Delete it. Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03ARM: ks8695: delete local <mach/gpio.h> headerLinus Walleij
This header is not used by anything, and since the arch does not specify NEED_MACH_GPIO_H it is not included into <linux/gpio.h> either. Delete it. Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio: drop users of irq_set_chip_and_handler_name()Linus Walleij
Switch all users of irq_set_chip_and_handler_name() to simply use irq_set_chip_and_handler(), all just provide a boilerplate name like "demux" or "mux" - a fact which is anyway obvious from the hwirq number from the irqdomain now present in e.g. /proc/interrupts. Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03sh-pfc: sh7372: Fix pin bias setupLaurent Pinchart
When computing the pin configuration register offset the bias setup code erroneously compares the pin number range with the loop index instead of the pin number. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03sh-pfc: r8a7740: Fix pin bias setupLaurent Pinchart
When computing the pin configuration register offset the bias setup code erroneously compares the pin number range with the loop index instead of the pin number. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03ALSA: hda/realtek - Independent of model for HPKailang Yang
Create single model for HP. The headset jack module was difference between other chrome book. It need to manual control Mic jack detect. Chrome OS loaded driver by models. Remove old assigned fixup table from ALC269 fixup list entry. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-12-03ALSA: hda - Fix headset mic input after muted internal mic (Dell/Realtek)David Henningsson
By trial and error, I found this patch could work around an issue where the headset mic would stop working if you switch between the internal mic and the headset mic, and the internal mic was muted. It still takes a second or two before the headset mic actually starts working, but still better than nothing. Information update from Kailang: The verb was ADC digital mute(bit 6 default 1). Switch internal mic and headset mic will run alc_headset_mode_default. The coef index 0x11 will set to 0x0041. Because headset mode was fixed type. It doesn't need to run alc_determine_headset_type. So, the value still keep 0x0041. ADC was muted. BugLink: https://bugs.launchpad.net/bugs/1256840 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-12-03dt: binding: reword PowerPC 8xxx GPIO documentationGerhard Sittig
re-format and re-word the device tree binding documentation for MPC8xxx and compatibles, reference the common document for interrupt controllers and remove outdated duplicate SoC specific information Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <Pawel.Moll@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <devicetree@vger.kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-03ARM: tegra: delete nvidia,tegra20-spi.txt bindingStephen Warren
This binding shouldn't exist; Tegra20 has two forms of SPI controller that are documented separately in nvidia,tegra20-sflash.txt and nvidia,tegra20-slink.txt. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-02hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv)Chanwoo Choi
This patch fix typo of property name from 'pullup-uV' to 'pullup-uv'. The ntc_thermistor.c use 'pullup-uv' when parsing dt data. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-02of: add vendor prefix for GMTWei Ni
Adding Global Mixed-mode Technology Inc. to the list of devicetree vendor prefixes. Signed-off-by: Wei Ni <wni@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-02clk: exynos: Fix typos in DT bindings documentationLaurent Pinchart
s/comptible/compatible/ Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-02of: Add vendor prefix for LG CorporationThierry Reding
Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-02Documentation: net: fsl-fec.txt: Add phy-supply entryFabio Estevam
phy-supply is an optional property of the fec driver, so add it to the binding documentation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-12-02ARM: dts: doc: Document missing binding for omap5-mpuSricharan R
The binding and support for omap5-mpu which has a cortex-a15 smp core, gic and integrated L2 cache has been existing for sometime. So Documenting the missing binding here. Cc: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
generated by cgit (git 2.34.1) at 2025-07-15 16:33:36 +0000