| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"HDR support has finally been added. mipi-i3c-hci has been reworked and
Intel Nova Lake-S support has been added.
Subsystem:
- Add HDR transfer support
Drivers:
- dw: fix bus hang on Agilex5
- mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support
- svc: HDR support"
* tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (28 commits)
regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer
net: mctp i3c: switch to use i3c_xfer from i3c_priv_xfer
hwmon: (lm75): switch to use i3c_xfer from i3c_priv_xfer
i3c: document i3c_xfers
i3c: fix I3C_SDR bit number
i3c: master: svc: Add basic HDR mode support
i3c: master: svc: Replace bool rnw with union for HDR support
i3c: Switch to use new i3c_xfer from i3c_priv_xfer
i3c: Add HDR API support
i3c: master: add WQ_PERCPU to alloc_workqueue users
i3c: master: Remove i3c_device_free_ibi from i3c_device_remove
i3c: mipi-i3c-hci-pci: Set d3cold_delay to 0 for Intel controllers
i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers
i3c: mipi-i3c-hci-pci: Add exit callback
i3c: mipi-i3c-hci-pci: Change callback parameter
i3c: mipi-i3c-hci-pci: Allocate a structure for mipi_i3c_hci_pci device information
i3c: mipi-i3c-hci-pci: Factor out intel_reset()
i3c: mipi-i3c-hci-pci: Factor out private registers ioremapping
i3c: mipi-i3c-hci-pci: Constify driver data
i3c: mipi-i3c-hci-pci: Use readl_poll_timeout()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock update from Mike Rapoport:
"Introduce a 'check_pages' boot parameter to decouple simple checks for
page state on allocation and free from CONFIG_DEBUG_VM.
This allows enabling page checking without building kernel with
CONFIG_DEBUG_VM or forcing init_on_{alloc, free} or other heavier
mechanisms"
* tag 'memblock-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm/mm_init: Introduce a boot parameter for check_pages
|
|
Pull 9p updates from Dominique Martinet:
- fix a bug with O_APPEND in cached mode causing data to be written
multiple times on server
- use kvmalloc for trans_fd to avoid problems with large msize and
fragmented memory This should hopefully be used in more transports
when time allows
- convert to new mount API
- minor cleanups
* tag '9p-for-6.19-rc1' of https://github.com/martinetd/linux:
9p: fix new mount API cache option handling
9p: fix cache/debug options printing in v9fs_show_options
9p: convert to the new mount API
9p: create a v9fs_context structure to hold parsed options
net/9p: move structures and macros to header files
fs/fs_parse: add back fsparam_u32hex
fs/9p: delete unnnecessary condition
fs/9p: Don't open remote file with APPEND mode when writeback cache is used
net/9p: cleanup: change p9_trans_module->def to bool
9p: Use kvmalloc for message buffers on supported transports
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Perf event/metric description:
Unify all event and metric descriptions in JSON format. Now event
parsing and handling is greatly simplified by that.
From users point of view, perf list will provide richer information
about hardware events like the following.
$ perf list hw
List of pre-defined events (to be used in -e or -M):
legacy hardware:
branch-instructions
[Retired branch instructions [This event is an alias of branches]. Unit: cpu]
branch-misses
[Mispredicted branch instructions. Unit: cpu]
branches
[Retired branch instructions [This event is an alias of branch-instructions]. Unit: cpu]
bus-cycles
[Bus cycles,which can be different from total cycles. Unit: cpu]
cache-misses
[Cache misses. Usually this indicates Last Level Cache misses; this is intended to be used in conjunction with the
PERF_COUNT_HW_CACHE_REFERENCES event to calculate cache miss rates. Unit: cpu]
cache-references
[Cache accesses. Usually this indicates Last Level Cache accesses but this may vary depending on your CPU. This may include
prefetches and coherency messages; again this depends on the design of your CPU. Unit: cpu]
cpu-cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cycles]. Unit: cpu]
cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cpu-cycles]. Unit: cpu]
instructions
[Retired instructions. Be careful,these can be affected by various issues,most notably hardware interrupt counts. Unit: cpu]
ref-cycles
[Total cycles; not affected by CPU frequency scaling. Unit: cpu]
But most notable changes would be in the perf stat. On the right side,
the default metrics are better named and aligned. :)
$ perf stat -- perf test -w noploop
Performance counter stats for 'perf test -w noploop':
11 context-switches # 10.8 cs/sec cs_per_second
0 cpu-migrations # 0.0 migrations/sec migrations_per_second
3,612 page-faults # 3532.5 faults/sec page_faults_per_second
1,022.51 msec task-clock # 1.0 CPUs CPUs_utilized
110,466 branch-misses # 0.0 % branch_miss_rate (88.66%)
6,934,452,104 branches # 6781.8 M/sec branch_frequency (88.66%)
4,657,032,590 cpu-cycles # 4.6 GHz cycles_frequency (88.65%)
27,755,874,218 instructions # 6.0 instructions insn_per_cycle (89.03%)
TopdownL1 # 0.3 % tma_backend_bound
# 9.3 % tma_bad_speculation (89.05%)
# 9.7 % tma_frontend_bound (77.86%)
# 80.7 % tma_retiring (88.81%)
1.025318171 seconds time elapsed
1.013248000 seconds user
0.012014000 seconds sys
Deferred unwinding support:
With the kernel support (commit c69993ecdd4d: "perf: Support deferred
user unwind"), perf can use deferred callchains for userspace stack
trace with frame pointers like below:
$ perf record --call-graph fp,defer ...
This will be transparent to users when it comes to other commands like
perf report and perf script. They will merge the deferred callchains
to the previous samples as if they were collected together.
ARM SPE updates
- Extensive enhancements to support various kinds of memory
operations including GCS, MTE allocation tags, memcpy/memset,
register access, and SIMD operations.
- Add inverted data source filter (inv_data_src_filter) support to
exclude certain data sources.
- Improve documentation.
Vendor event updates:
- Intel: Updated event files for Sierra Forest, Panther Lake, Meteor
Lake, Lunar Lake, Granite Rapids, and others.
- Arm64: Added metrics for i.MX94 DDR PMU and Cortex-A720AE
definitions.
- RISC-V: Added JSON support for T-HEAD C920V2.
Misc:
- Improve pointer tracking in data type profiling. It'd give better
output when the variable is using container_of() to convert type.
- Annotation support for perf c2c report in TUI. Press 'a' key to
enter annotation view from cacheline browser window. This will show
which instruction is causing the cacheline contention.
- Lots of fixes and test coverage improvements!"
* tag 'perf-tools-for-v6.19-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (214 commits)
libperf: Use 'extern' in LIBPERF_API visibility macro
perf stat: Improve handling of termination by signal
perf tests stat: Add test for error for an offline CPU
perf stat: When no events, don't report an error if there is none
perf tests stat: Add "--null" coverage
perf cpumap: Add "any" CPU handling to cpu_map__snprint_mask
libperf cpumap: Fix perf_cpu_map__max for an empty/NULL map
perf stat: Allow no events to open if this is a "--null" run
perf test kvm: Add some basic perf kvm test coverage
perf tests evlist: Add basic evlist test
perf tests script dlfilter: Add a dlfilter test
perf tests kallsyms: Add basic kallsyms test
perf tests timechart: Add a perf timechart test
perf tests top: Add basic perf top coverage test
perf tests buildid: Add purge and remove testing
perf tests c2c: Add a basic c2c
perf c2c: Clean up some defensive gets and make asan clean
perf jitdump: Fix missed dso__put
perf mem-events: Don't leak online CPU map
perf hist: In init, ensure mem_info is put on error paths
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 6.19-rc1.
Only thing "major" in here is that two subsystems, gpib and vc04 have
moved out of the staging tree into the "real" portion of the kernel,
which is great to see. Other than that, the rest of the changes are
just tiny coding style cleanups, nothing earth-shattering.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (53 commits)
staging: rtl8723bs: fix out-of-bounds read in OnBeacon ESR IE parsing
staging: rtl8723bs: fix stack buffer overflow in OnAssocReq IE parsing
staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser
staging: gpib: Clean-up commented-out code
staging: rtl8723bs: remove custom FIELD_OFFSET macro
staging: rtl8723bs: replace FIELD_OFFSET usage with offsetof in rtw_mlme_ext.c
staging: rtl8723bs: remove dead commented code from odm.c
staging: rtl8723bs: use standard offsetof in cfg80211 operations
staging: rtl8723bs: remove unused registry and BSSID offset macros
staging: rtl8723bs: core: delete commented-out code
staging: rtl8723bs: core: fix block comment style issues
staging: greybus: uart: check return values during probe
staging: fbtft: core: fix potential memory leak in fbtft_probe_common()
staging: gpib: Destage gpib
staging: gpib: Fix SPDX license for gpib headers
staging: gpib: Update TODO file
staging: gpib: Change // comments in uapi header file
platform/raspberrypi: Destage VCHIQ MMAL driver
platform/raspberrypi: Destage VCHIQ interface
staging: vc04_services: Cleanup VCHIQ TODO entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing
major at all, just small constant churn to make the tty layer
"cleaner" as well as serial driver updates and even a new test added!
Included in here are:
- More tty/serial cleanups from Jiri
- tty tiocsti test added to hopefully ensure we don't regress in this
area again
- sc16is7xx driver updates
- imx serial driver updates
- 8250 driver updates
- new hardware device ids added
- other minor serial/tty driver cleanups and tweaks
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
serial: sh-sci: Fix deadlock during RSCI FIFO overrun error
dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"
LoongArch: dts: Add uart new compatible string
serial: 8250: Add Loongson uart driver support
dt-bindings: serial: 8250: Add Loongson uart compatible
serial: 8250: add driver for KEBA UART
serial: Keep rs485 settings for devices without firmware node
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: sprd: Return -EPROBE_DEFER when uart clock is not ready
tty: serial: samsung: Declare earlycon for Exynos850
serial: icom: Convert PCIBIOS_* return codes to errnos
serial: 8250-of: Fix style issues in 8250_of.c
serial: add support of CPCI cards
serial: mux: Fix kernel doc for mux_poll()
tty: replace use of system_unbound_wq with system_dfl_wq
serial: 8250_platform: simplify IRQF_SHARED handling
serial: 8250: make share_irqs local to 8250_platform
serial: 8250: move skip_txen_test to core
serial: drop SERIAL_8250_DEPRECATED_OPTIONS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX License update from Greg KH:
"Here is a single patch that updates the LGPL-2.1 license text with
the "alternate" SPDX tags that are allowed for this license type"
* tag 'spdx-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
LICENSES: Add modern form of the LGPL-2.1 tags to the usage guide section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
"A fix which allows booting on the very old 710 workstations, and two
fixes in the syscall entry/exit path which allow to execute 64-bit
userspace binaries.
Note that although we currently have a 64-bit (static) kernel to allow
more than 4 GB physical RAM, there is no support for 64-bit userspace
for parisc-linux yet, but Dave and Sven are making slowly progress to
port and fix glibc and gcc.
Summary:
- Fix boot on 710 workstation by not reprogramming ASP chip
- Fix 64bit userspace syscalls (64-bit userspace is still being
developed)
- minor code cleanups in asm/bug.h and perf_regs.c"
* tag 'parisc-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Do not reprogram affinitiy on ASP chip
parisc: Drop linux/kernel.h include from asm/bug.h header
parisc: remove unneeded semicolon in perf_regs.c
parisc: entry.S: fix space adjustment on interruption for 64-bit userspace
parisc: entry: set W bit for !compat tasks in syscall_restore_rfi()
parisc: Drop padding fields and layers entries from inventory log
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"The Termius 10x18 console bitmap font has been added. It is good
match for modern 13-16 inch laptop displays with resolutions like
1280x800 and 1440x900 pixels.
The gbefb and tcx.c drivers got some fixes to restore X11 support,
pxafb was not actually clamping input values and the ssd1307fb driver
leaked memory in the failure path.
The other patches convert some common drivers to use dev_info() and
dev_dbg() instead of printk(). Summary:
Framework updates:
- fonts: Add Terminus 10x18 console font [Neilay Kharwadkar]
Driver fixes:
- gbefb: fix to use physical address instead of dma address [René Rebe]
- tcx.c fix mem_map to correct smem_start offset [René Rebe]
- pxafb: Fix multiple clamped values in pxafb_adjust_timing [Thorsten Blum]
- ssd1307fb: fix potential page leak in ssd1307fb_probe() [Abdun Nihaal]
Cleanups:
- vga16fb: Request memory region [Javier Garcia]
- vga16fb: replace printk() with dev_*() in probe [Vivek BalachandharTN]
- vesafb, gxt4500fb, tridentfb: Use dev_dbg() instead of printk() [Javier Garcia]
- i810: use dev_info() [Shi Hao]"
* tag 'fbdev-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: ssd1307fb: fix potential page leak in ssd1307fb_probe()
fbdev: i810: use appopriate log interface dev_info
fbdev: tridentfb: replace printk() with dev_*() in probe
lib/fonts: Add Terminus 10x18 console font
fbdev: pxafb: Fix multiple clamped values in pxafb_adjust_timing
fbdev: tcx.c fix mem_map to correct smem_start offset
fbdev: gxt4500fb: Use dev_err instead of printk
fbdev: gbefb: fix to use physical address instead of dma address
fbdev: vesafb: Use dev_* fn's instead printk
fbdev: vga16fb: Request memory region
fbdev: vga16fb: replace printk() with dev_*() in probe
|
|
Commit 2f26f58df041 ("ocfs2: annotate flexible array members with
__counted_by_le()") started annotating the flexible arrays used by
ocfs2, and now gcc complains about ocfs2_reflink_xattr_header():
In function ‘fortify_memset_chk’,
inlined from ‘ocfs2_reflink_xattr_header’ at fs/ocfs2/xattr.c:6365:5:
include/linux/fortify-string.h:480:25: error: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
and it looks like the complaint is valid - even if the actual error
message is somewhat confusing.
The 'last' pointer points to past the end of the counted flex array, but
is used as an actual 'last' entry rather than a 'one-past-last'.
It looks like the code copied and cleared an extra entry (which is
likely harmless in practice), but I don't know ocfs2 at all. Because
it's also possible that the counted-by annotations are off-by-one, and
so this needs checking by somebody who actually knows ocfs2.
But in the meantime this fixes the build error, and certainly _looks_
sane.
Cc: Dmitry Antipov <dmantipov@yandex.ru>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix accounting of stop_count in file release
On opening the trace file, if "pause-on-trace" option is set, it will
increment the stop_count. On file release, it checks if stop_count is
set, and if so it decrements it. Since this code was originally
written, the stop_count can be incremented by other use cases. This
makes just checking the stop_count not enough to know if it should be
decremented.
Add a new iterator flag called "PAUSE" and have it set if the open
disables tracing and only decrement the stop_count if that flag is
set on close.
- Remove length field in trace_seq_printf() of print_synth_event()
When printing the synthetic event that has a static length array
field, the vsprintf() of the trace_seq_printf() triggered a
"(efault)" in the output. That's because the print_fmt replaced the
"%.*s" with "%s" causing the arguments to be off.
- Fix a bunch of typos
* tag 'trace-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix typo in trace_seq.c
tracing: Fix typo in trace_probe.c
tracing: Fix multiple typos in trace_osnoise.c
tracing: Fix multiple typos in trace_events_user.c
tracing: Fix typo in trace_events_trigger.c
tracing: Fix typo in trace_events_hist.c
tracing: Fix typo in trace_events_filter.c
tracing: Fix multiple typos in trace_events.c
tracing: Fix multiple typos in trace.c
tracing: Fix typo in ring_buffer_benchmark.c
tracing: Fix multiple typos in ring_buffer.c
tracing: Fix typo in fprobe.c
tracing: Fix typo in fpgraph.c
tracing: Fix fixed array of synthetic event
tracing: Fix enabling of tracing on file release
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous documentation fixes"
* tag 'x86-urgent-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/Documentation: Prefix hexadecimal literals with 0x
x86/boot/Documentation: Spell 'ID' consistently
x86/platform: Fix and extend kernel-doc comments in <asm/x86_init.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Miscellaneous scheduler fixes/cleanups:
- Fix psi_dequeue() for Proxy Execution
- Fix hrtick() vs. scheduling context bug
- Fix unfairness caused by stalled tg_load_avg_contrib when the last
task migrates out
- Fix whitespace noise in headers
- Remove a preempt-disable section in rt_mutex_setprio()"
* tag 'sched-urgent-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix psi_dequeue() for Proxy Execution
sched/fair: Fix unfairness caused by stalled tg_load_avg_contrib when the last task migrates out
sched/rt: Remove a preempt-disable section in rt_mutex_setprio()
sched/hrtick: Fix hrtick() vs. scheduling context
sched/headers: Remove whitespace noise from kernel/sched/sched.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Address various objtool scalability bugs/inefficiencies exposed by
allmodconfig builds, plus improve the quality of alternatives
instructions generated code and disassembly"
* tag 'objtool-urgent-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Simplify .annotate_insn code generation output some more
objtool: Add more robust signal error handling, detect and warn about stack overflows
objtool: Remove newlines and tabs from annotation macros
objtool: Consolidate annotation macros
x86/asm: Remove ANNOTATE_DATA_SPECIAL usage
x86/alternative: Remove ANNOTATE_DATA_SPECIAL usage
objtool: Fix stack overflow in validate_branch()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Two fixes related to recent introduction of scoped_seqlock_read():
- Fix compiler build failures when a particular .config and compiler
build options variant doesn't result in the expected removal of
unused, catch-bugs portions of scoped_seqlock_read() by the inliner
at build time, and cause a linker fail even in correct code
- Match read-locking order in do_task_stat() and do_io_accounting().
The inconsistency here was harmless but unnecessary"
* tag 'locking-urgent-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
seqlock: Cure some more scoped_seqlock() optimization fails
seqlock, procfs: Match scoped_seqlock_read() critical section vs. RCU ordering in do_task_stat() to do_io_accounting()
|
|
Commit eeb934137deb ("iommu/amd: Report SEV-TIO support") was confused
about the config options that expose amd_iommu_sev_tio_supported(), and
made the declaration (and alternative dummy function) conditional on the
CONFIG_AMD_IOMMU config option.
But the code is actually dependent on CONFIG_KVM_AMD_SEV, resulting in
ERROR: modpost: "amd_iommu_sev_tio_supported" [drivers/crypto/ccp/ccp.ko] undefined!
make[2]: *** [scripts/Makefile.modpost:147: Module.symvers] Error 1
if you have the AMD iommu enabled, but don't enable KVM_AMD_SEV support.
Fix it by moving the declaration into the right #ifdef section in the
header file.
Fixes: eeb934137deb ("iommu/amd: Report SEV-TIO support")
Cc: Alexey Kardashevskiy <aik@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull nfsd updates from Chuck Lever:
- Mike Snitzer's mechanism for disabling I/O caching introduced in
v6.18 is extended to include using direct I/O. The goal is to further
reduce the memory footprint consumed by NFS clients accessing large
data sets via NFSD.
- The NFSD community adopted a maintainer entry profile during this
cycle. See
Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst
- Work continues on hardening NFSD's implementation of the pNFS block
layout type. This type enables pNFS clients to directly access the
underlying block devices that contain an exported file system,
reducing server overhead and increasing data throughput.
- The remaining patches are clean-ups and minor optimizations. Many
thanks to the contributors, reviewers, testers, and bug reporters who
participated during the v6.19 NFSD development cycle.
* tag 'nfsd-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (38 commits)
NFSD: nfsd-io-modes: Separate lists
NFSD: nfsd-io-modes: Wrap shell snippets in literal code blocks
NFSD: Add toctree entry for NFSD IO modes docs
NFSD: add Documentation/filesystems/nfs/nfsd-io-modes.rst
NFSD: Implement NFSD_IO_DIRECT for NFS WRITE
NFSD: Make FILE_SYNC WRITEs comply with spec
NFSD: Add trace point for SCSI fencing operation.
NFSD: use correct reservation type in nfsd4_scsi_fence_client
xdrgen: Don't generate unnecessary semicolon
xdrgen: Fix union declarations
NFSD: don't start nfsd if sv_permsocks is empty
xdrgen: handle _XdrString in union encoder/decoder
xdrgen: Fix the variable-length opaque field decoder template
xdrgen: Make the xdrgen script location-independent
xdrgen: Generalize/harden pathname construction
lockd: don't allow locking on reexported NFSv2/3
MAINTAINERS: add a nfsd blocklayout reviewer
nfsd: Use MD5 library instead of crypto_shash
nfsd: stop pretending that we cache the SEQUENCE reply.
NFS: nfsd-maintainer-entry-profile: Inline function name prefixes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"This round it contains only three small cleanup patches"
* tag 'for-linus-6.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen: use min() instead of min_t()
drivers/xen/xenbus: Replace deprecated strcpy in xenbus_transaction_end
drivers/xen/xenbus: Simplify return statement in join()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe Link Encryption and Device Authentication from Dan Williams:
"New PCI infrastructure and one architecture implementation for PCIe
link encryption establishment via platform firmware services.
This work is the result of multiple vendors coming to consensus on
some core infrastructure (thanks Alexey, Yilun, and Aneesh!), and
three vendor implementations, although only one is included in this
pull. The PCI core changes have an ack from Bjorn, the crypto/ccp/
changes have an ack from Tom, and the iommu/amd/ changes have an ack
from Joerg.
PCIe link encryption is made possible by the soup of acronyms
mentioned in the shortlog below. Link Integrity and Data Encryption
(IDE) is a protocol for installing keys in the transmitter and
receiver at each end of a link. That protocol is transported over Data
Object Exchange (DOE) mailboxes using PCI configuration requests.
The aspect that makes this a "platform firmware service" is that the
key provisioning and protocol is coordinated through a Trusted
Execution Envrionment (TEE) Security Manager (TSM). That is either
firmware running in a coprocessor (AMD SEV-TIO), or quasi-hypervisor
software (Intel TDX Connect / ARM CCA) running in a protected CPU
mode.
Now, the only reason to ask a TSM to run this protocol and install the
keys rather than have a Linux driver do the same is so that later, a
confidential VM can ask the TSM directly "can you certify this
device?".
That precludes host Linux from provisioning its own keys, because host
Linux is outside the trust domain for the VM. It also turns out that
all architectures, save for one, do not publish a mechanism for an OS
to establish keys in the root port. So "TSM-established link
encryption" is the only cross-architecture path for this capability
for the foreseeable future.
This unblocks the other arch implementations to follow in v6.20/v7.0,
once they clear some other dependencies, and it unblocks the next
phase of work to implement the end-to-end flow of confidential device
assignment. The PCIe specification calls this end-to-end flow Trusted
Execution Environment (TEE) Device Interface Security Protocol
(TDISP).
In the meantime, Linux gets a link encryption facility which has
practical benefits along the same lines as memory encryption. It
authenticates devices via certificates and may protect against
interposer attacks trying to capture clear-text PCIe traffic.
Summary:
- Introduce the PCI/TSM core for the coordination of device
authentication, link encryption and establishment (IDE), and later
management of the device security operational states (TDISP).
Notify the new TSM core layer of PCI device arrival and departure
- Add a low level TSM driver for the link encryption establishment
capabilities of the AMD SEV-TIO architecture
- Add a library of helpers TSM drivers to use for IDE establishment
and the DOE transport
- Add skeleton support for 'bind' and 'guest_request' operations in
support of TDISP"
* tag 'tsm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm: (23 commits)
crypto/ccp: Fix CONFIG_PCI=n build
virt: Fix Kconfig warning when selecting TSM without VIRT_DRIVERS
crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)
iommu/amd: Report SEV-TIO support
psp-sev: Assign numbers to all status codes and add new
ccp: Make snp_reclaim_pages and __sev_do_cmd_locked public
PCI/TSM: Add 'dsm' and 'bound' attributes for dependent functions
PCI/TSM: Add pci_tsm_guest_req() for managing TDIs
PCI/TSM: Add pci_tsm_bind() helper for instantiating TDIs
PCI/IDE: Initialize an ID for all IDE streams
PCI/IDE: Add Address Association Register setup for downstream MMIO
resource: Introduce resource_assigned() for discerning active resources
PCI/TSM: Drop stub for pci_tsm_doe_transfer()
drivers/virt: Drop VIRT_DRIVERS build dependency
PCI/TSM: Report active IDE streams
PCI/IDE: Report available IDE streams
PCI/IDE: Add IDE establishment helpers
PCI: Establish document for PCI host bridge sysfs attributes
PCI: Add PCIe Device 3 Extended Capability enumeration
PCI/TSM: Establish Secure Sessions and Link Encryption
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog support for:
- Renesas WWDT
- AST2700 platform
- MediaTek MT8189 SoC
- Loongson-2k0300 watchdog
- Qualcomm Kaanapali watchdog
- RK3506 compatible
- Airoha AN7583 SoC
- DT Schema conversions:
- lantiq,wdt
- TI OMAP
- marvell,orion-wdt
- Several other fixes and improvements
* tag 'linux-watchdog-6.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits)
watchdog: starfive: Fix resource leak in probe error path
dt-bindings: watchdog: airoha: Add support for Airoha AN7583 SoC
dt-bindings: watchdog: lantiq,wdt: convert bindings to dtschema
dt-bindings: watchdog: Add RK3506 compatible
dt-bindings: watchdog: Document Qualcomm Kaanapali watchdog
watchdog: wdat_wdt: Fix ACPI table leak in probe function
watchdog: loongson1: Add Loongson-2k0300 watchdog support
dt-bindings: watchdog: loongson,ls1x-wdt: Add ls2k0300-wdt compatible
watchdog: loongson1: Drop CONFIG_OF
watchdog: loongson1: Simplify ls1x_wdt_probe code
watchdog: loongson1: Add missing MODULE_PARM_DESC
watchdog/diag288: Fix module comment typos
dt-bindings: watchdog: Support MediaTek MT8189 wdt
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8189 SoC
dt-bindings: mfd: rohm,bd96801-pmic: Correct timeout-sec length and reference watchdog schema
dt-bindings: watchdog: Allow node names named 'pmic'
dt-bindings: watchdog: Restrict timeout-sec to one number
watchdog: renesas_wwdt: add driver
dt-bindings: watchdog: Add Renesas WWDT
dt-bindings: watchdog: Convert marvell,orion-wdt to DT schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Reduce code duplication related to channel removal, and invoke the
removal in one case previously missing, both in the Glink driver
* tag 'rpmsg-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: remove duplicate code for rpmsg device remove
rpmsg: glink: fix rpmsg device leak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add support for the compute DSP in the Qualcomm SDM660 platform, and
finally fix up the way MSM8974 audio DSP remoteproc driver manages
its power rails
- Replace the usage of of_reserved_mem_lookup() with
of_reserved_mem_region_to_resource() to clean things up across most
of the drivers
- Perform a variety of housekeeping and cleanup work across iMX,
Mediatek, and TI remoteproc drivers
* tag 'rproc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (45 commits)
remoteproc: qcom_q6v5_wcss: use optional reset for wcss_q6_bcr_reset
remoteproc: qcom_q6v5_wcss: fix parsing of qcom,halt-regs
remoteproc: qcom_wcnss: Fix NULL vs IS_ERR() bug in wcnss_alloc_memory_region()
remoteproc: qcom: q6v5: Fix NULL vs IS_ERR() bug in q6v5_alloc_memory_region()
remoteproc: qcom: pas: Fix a couple NULL vs IS_ERR() bugs
remoteproc: qcom_q6v5_adsp: Fix a NULL vs IS_ERR() check in adsp_alloc_memory_region()
remoteproc: imx_dsp_rproc: Fix NULL vs IS_ERR() bug in imx_dsp_rproc_add_carveout()
remoteproc: st: Fix indexing of memory-regions
remoteproc: qcom: pas: Add support for SDM660 CDSP
dt-bindings: remoteproc: qcom: adsp: Add SDM660 CDSP compatible
dt-bindings: remoteproc: qcom: adsp: Add missing constrains for SDM660 ADSP
dt-bindings: remoteproc: qcom,sc8280xp-pas: Fix CDSP power desc
remoteproc: omap: Remove redundant pm_runtime_mark_last_busy() calls
remoteproc: qcom: Use of_reserved_mem_region_* functions for "memory-region"
remoteproc: qcom_q6v5_pas: Use resource with CX PD for MSM8974
dt-bindings: remoteproc: qcom,adsp: Make msm8974 use CX as power domain
remoteproc: Use of_reserved_mem_region_* functions for "memory-region"
remoteproc: imx_dsp_rproc: Simplify start/stop error handling
remoteproc: imx_rproc: Remove enum imx_rproc_method
remoteproc: imx_dsp_rproc: Simplify IMX_RPROC_RESET_CONTROLLER switch case
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This mainly fixes handling of disconnected directories and adds new
tests"
* tag 'landlock-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add disconnected leafs and branch test suites
selftests/landlock: Add tests for access through disconnected paths
landlock: Improve variable scope
landlock: Fix handling of disconnected directories
selftests/landlock: Fix makefile header list
landlock: Make docs in cred.h and domain.h visible
landlock: Minor comments improvements
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Add LLC statistics columns:
LLCkRPS = Last Level Cache Thousands of References Per Second
LLC%hit = Last Level Cache Hit %
- Recognize Wildcat Lake and Nova Lake platforms
- Add MSR check for Android
- Add APERF check for VMWARE
- Add RAPL check for AWS
- Minor fixes to turbostat (and x86_energy_perf_policy)
* tag 'turbostat-v2025.12.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (21 commits)
tools/power turbostat: version 2025.12.02
tools/power turbostat: Print wide names only for RAW 64-bit columns
tools/power turbostat: Print percentages in 8-columns
tools/power turbostat: Print "nan" for out of range percentages
tools/power turbostat: Validate APERF access for VMWARE
tools/power turbostat: Enhance perf probe
tools/power turbostat: Validate RAPL MSRs for AWS Nitro Hypervisor
tools/power x86_energy_perf_policy: Fix potential NULL pointer dereference
tools/power x86_energy_perf_policy: Fix format string in error message
tools/power x86_energy_perf_policy: Simplify Android MSR probe
tools/power x86_energy_perf_policy: Add Android MSR device support
tools/power turbostat: Add run-time MSR driver probe
tools/power turbostat: Set per_cpu_msr_sum to NULL after free
tools/power turbostat: Add LLC stats
tools/power turbostat: Remove dead code
tools/power turbostat: Refactor floating point printout code
tools/power turbostat.8: Update example
tools/power turbostat: Refactor added-counter value printing code
tools/power turbostat: Refactor added column header printing
tools/power turbostat: Add Wildcat Lake and Nova Lake support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Ira Weiny:
"These are mainly bug fixes and code updates.
There is a new feature to divide up memmap= carve outs and a fix
caught in linux-next for that patch. Managing memmap memory on the fly
for multiple VM's was proving difficult and Mike provided a driver
which allows for the memory to be better manged.
Summary:
- Allow exposing RAM carveouts as NVDIMM DIMM devices
- Prevent integer overflow in ramdax_get_config_data()
- Replace use of system_wq with system_percpu_wq
- Documentation: btt: Unwrap bit 31-30 nested table
- tools/testing/nvdimm: Use per-DIMM device handle"
* tag 'libnvdimm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Prevent integer overflow in ramdax_get_config_data()
Documentation: btt: Unwrap bit 31-30 nested table
nvdimm: replace use of system_wq with system_percpu_wq
tools/testing/nvdimm: Use per-DIMM device handle
nvdimm: allow exposing RAM carveouts as NVDIMM DIMM devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- More DMA mapping API refactoring to physical addresses as the primary
interface instead of page+offset parameters.
This time dma_map_ops callbacks are converted to physical addresses,
what in turn results also in some simplification of architecture
specific code (Leon Romanovsky and Jason Gunthorpe)
- Clarify that dma_map_benchmark is not a kernel self-test, but
standalone tool (Qinxin Xia)
* tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: remove unused map_page callback
xen: swiotlb: Convert mapping routine to rely on physical address
x86: Use physical address for DMA mapping
sparc: Use physical address DMA mapping
powerpc: Convert to physical address DMA mapping
parisc: Convert DMA map_page to map_phys interface
MIPS/jazzdma: Provide physical address directly
alpha: Convert mapping routine to rely on physical address
dma-mapping: remove unused mapping resource callbacks
xen: swiotlb: Switch to physical address mapping callbacks
ARM: dma-mapping: Switch to physical address mapping callbacks
ARM: dma-mapping: Reduce struct page exposure in arch_sync_dma*()
dma-mapping: convert dummy ops to physical address mapping
dma-mapping: prepare dma_map_ops to conversion to physical address
tools/dma: move dma_map_benchmark from selftests to tools/dma
|
|
Pull bitmap updates from Yury Norov:
- Runtime field_{get,prep}() (Geert)
- Rust ID pool updates (Alice)
- min_t() simplification (David)
- __sw_hweightN kernel-doc fixes (Andy)
- cpumask.h headers cleanup (Andy)
* tag 'bitmap-for-6.19' of github.com:/norov/linux: (32 commits)
rust_binder: use bitmap for allocation of handles
rust: id_pool: do not immediately acquire new ids
rust: id_pool: do not supply starting capacity
rust: id_pool: rename IdPool::new() to with_capacity()
rust: bitmap: add BitmapVec::new_inline()
rust: bitmap: add MAX_LEN and MAX_INLINE_LEN constants
cpumask: Don't use "proxy" headers
soc: renesas: Use bitfield helpers
clk: renesas: Use bitfield helpers
ALSA: usb-audio: Convert to common field_{get,prep}() helpers
soc: renesas: rz-sysc: Convert to common field_get() helper
pinctrl: ma35: Convert to common field_{get,prep}() helpers
iio: mlx90614: Convert to common field_{get,prep}() helpers
iio: dac: Convert to common field_prep() helper
gpio: aspeed: Convert to common field_{get,prep}() helpers
EDAC/ie31200: Convert to common field_get() helper
crypto: qat - convert to common field_get() helper
clk: at91: Convert to common field_{get,prep}() helpers
bitfield: Add non-constant field_{prep,get}() helpers
bitfield: Add less-checking __FIELD_{GET,PREP}()
...
|
|
Commit 14e9a18b07ec ("rust: sync: atomic: Make Atomic*Ops pub(crate)")
added a `pub(crate)` import in the same "block" as the `pub` one,
without running `rustfmt`, which would sort them differently.
Instead of running `rustfmt` as-is, add a newline to keep the import
"blocks" with different visibilities separate.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Daniel Gomez:
"Rust module parameter support:
- Add Rust module parameter support, enabling Rust kernel modules to
declare and use module parameters. The rust_minimal sample module
demonstrates this, and the rust null block driver will be the first
to use it in the next cycle. This also adds the Rust module files
under the modules subsystem as agreed between the Rust and modules
maintainers.
Hardening:
- Add compile-time check for embedded NUL characters in MODULE_*()
macros. This module metadata was once used (and maybe still) to
bypass license enforcement (LWN article from 2003):
https://lwn.net/Articles/82305/ [1]
MAINTAINERS:
- Add Aaron Tomlin as reviewer for the Modules subsystem"
* tag 'modules-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
MAINTAINERS: Add myself as reviewer for module support
module: Add compile-time check for embedded NUL characters
media: radio: si470x: Fix DRIVER_AUTHOR macro definition
media: dvb-usb-v2: lmedm04: Fix firmware macro definitions
modules: add rust modules files to MAINTAINERS
rust: samples: add a module parameter to the rust_minimal sample
rust: module: update the module macro with module parameter support
rust: module: use a reference in macros::module::module
rust: introduce module_param module
rust: str: add radix prefixed integer parsing functions
rust: sync: add `SetOnce`
|
|
Currently, if the sleep flag is set, psi_dequeue() doesn't
change any of the psi_flags.
This is because psi_task_switch() will clear TSK_ONCPU as well
as other potential flags (TSK_RUNNING), and the assumption is
that a voluntary sleep always consists of a task being dequeued
followed shortly there after with a psi_sched_switch() call.
Proxy Execution changes this expectation, as mutex-blocked tasks
that would normally sleep stay on the runqueue. But in the case
where the mutex-owning task goes to sleep, or the owner is on a
remote cpu, we will then deactivate the blocked task shortly
after.
In that situation, the mutex-blocked task will have had its
TSK_ONCPU cleared when it was switched off the cpu, but it will
stay TSK_RUNNING. Then if we later dequeue it (as currently done
if we hit a case find_proxy_task() can't yet handle, such as the
case of the owner being on another rq or a sleeping owner)
psi_dequeue() won't change any state (leaving it TSK_RUNNING),
as it incorrectly expects a psi_task_switch() call to
immediately follow.
Later on when the task get woken/re-enqueued, and psi_flags are
set for TSK_RUNNING, we hit an error as the task is already
TSK_RUNNING:
psi: inconsistent task state! task=188:kworker/28:0 cpu=28 psi_flags=4 clear=0 set=4
To resolve this, extend the logic in psi_dequeue() so that
if the sleep flag is set, we also check if psi_flags have
TSK_ONCPU set (meaning the psi_task_switch is imminent) before
we do the shortcut return.
If TSK_ONCPU is not set, that means we've already switched away,
and this psi_dequeue call needs to clear the flags.
Fixes: be41bde4c3a8 ("sched: Add an initial sketch of the find_proxy_task() function")
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Haiyue Wang <haiyuewa@163.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://patch.msgid.link/20251205012721.756394-1-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20251117185550.365156-1-kprateek.nayak@amd.com/
|
|
last task migrates out
When a task is migrated out, there is a probability that the tg->load_avg
value will become abnormal. The reason is as follows:
1. Due to the 1ms update period limitation in update_tg_load_avg(), there
is a possibility that the reduced load_avg is not updated to tg->load_avg
when a task migrates out.
2. Even though __update_blocked_fair() traverses the leaf_cfs_rq_list and
calls update_tg_load_avg() for cfs_rqs that are not fully decayed, the key
function cfs_rq_is_decayed() does not check whether
cfs->tg_load_avg_contrib is null. Consequently, in some cases,
__update_blocked_fair() removes cfs_rqs whose avg.load_avg has not been
updated to tg->load_avg.
Add a check of cfs_rq->tg_load_avg_contrib in cfs_rq_is_decayed(),
which fixes the case (2.) mentioned above.
Fixes: 1528c661c24b ("sched/fair: Ratelimit update to tg->load_avg")
Signed-off-by: xupengbo <xupengbo@oppo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Aaron Lu <ziqianlu@bytedance.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Aaron Lu <ziqianlu@bytedance.com>
Link: https://patch.msgid.link/20250827022208.14487-1-xupengbo@oppo.com
|
|
rt_mutex_setprio() has only one caller: rt_mutex_adjust_prio(). It
expects that task_struct::pi_lock and rt_mutex_base::wait_lock are held.
Both locks are raw_spinlock_t and are acquired with disabled interrupts.
Nevertheless rt_mutex_setprio() disables preemption while invoking
__balance_callbacks() and raw_spin_rq_unlock(). Even if one of the
balance callbacks unlocks the rq then it must not enable interrupts
because rt_mutex_base::wait_lock is still locked.
Therefore interrupts should remain disabled and disabling preemption is
not needed.
Commit 4c9a4bc89a9cc ("sched: Allow balance callbacks for check_class_changed()")
adds a preempt-disable section to rt_mutex_setprio() and
__sched_setscheduler(). In __sched_setscheduler() the preemption is
disabled before rq is unlocked and interrupts enabled but I don't see
why it makes a difference in rt_mutex_setprio().
Remove the preempt_disable() section from rt_mutex_setprio().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251127155529.t_sTatE4@linutronix.de
|
|
The sched_class::task_tick() method is called on the donor
sched_class, and sched_tick() hands it rq->donor as argument,
which is consistent.
However, while hrtick() uses the donor sched_class, it then passes
rq->curr, which is inconsistent. Fix it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20250918080205.442967033@infradead.org
|
|
A single case of space-Tab noise snuck in recently.
Fixes: 36569780b0d6 ("sched: Change nr_uninterruptible type to unsigned long")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/176478595428.498.13816176784792752599.tip-bot2@tip-bot2
|
|
Arnd reported an x86 randconfig using gcc-15 tripped over
__scoped_seqlock_bug(). Turns out GCC chose not to inline the
scoped_seqlock helper functions and as such was not able to optimize
properly.
[ mingo: Clang fails the build too in some circumstances. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://patch.msgid.link/20251204104332.GG2528459@noisy.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Arch Topology:
- Move parse_acpi_topology() from arm64 to common code for reuse in
RISC-V
CPU:
- Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
- Print a newline (or 0x0A) instead of '(null)' reading
/sys/devices/system/cpu/nohz_full when nohz_full= is not set
debugfs
- Remove (broken) 'no-mount' mode
- Remove redundant access mode checks in debugfs_get_tree() and
debugfs_create_*() functions
Devres:
- Remove unused devm_free_percpu() helper
- Move devm_alloc_percpu() from device.h to devres.h
Firmware Loader:
- Replace simple_strtol() with kstrtoint()
- Do not call cancel_store() when no upload is in progress
kernfs:
- Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
- Fix a missing unwind path in __kernfs_new_node()
Misc:
- Increase the name size in struct auxiliary_device_id to 40
characters
- Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
alloc_workqueue()
Platform:
- Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap
functions
Rust:
- Auxiliary:
- Unregister auxiliary device on parent device unbind
- Move parent() to impl Device; implement device context aware
parent() for Device<Bound>
- Illustrate how to safely obtain a driver's device private data
when calling from an auxiliary driver into the parant device
driver
- DebugFs:
- Implement support for binary large objects
- Device:
- Let probe() return the driver's device private data as pinned
initializer, i.e. impl PinInit<Self, Error>
- Implement safe accessor for a driver's device private data for
Device<Bound> (returned reference can't out-live driver binding
and guarantees the correct private data type)
- Implement AsBusDevice trait, to be used by class device
abstractions to derive the bus device type of the parent device
- DMA:
- Store raw pointer of allocation as NonNull
- Use start_ptr() and start_ptr_mut() to inherit correct
mutability of self
- FS:
- Add file::Offset type alias
- I2C:
- Add abstractions for I2C device / driver infrastructure
- Implement abstractions for manual I2C device registrations
- I/O:
- Use "kernel vertical" style for imports
- Define ResourceSize as resource_size_t
- Move ResourceSize to top-level I/O module
- Add type alias for phys_addr_t
- Implement Rust version of read_poll_timeout_atomic()
- PCI:
- Use "kernel vertical" style for imports
- Move I/O and IRQ infrastructure to separate files
- Add support for PCI interrupt vectors
- Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert
an IrqVector bound to specific pci::Device into an IrqRequest
bound to the same pci::Device's parent Device
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- PinInit:
- Add {pin_}init_scope() to execute code before creating an
initializer
- Platform:
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- Timekeeping:
- Implement abstraction of udelay()
- Uaccess:
- Implement read_slice_partial() and read_slice_file() for
UserSliceReader
- Implement write_slice_partial() and write_slice_file() for
UserSliceWriter
sysfs:
- Prepare the constification of struct attribute"
* tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (75 commits)
rust: pci: fix build failure when CONFIG_PCI_MSI is disabled
debugfs: Fix default access mode config check
debugfs: Remove broken no-mount mode
debugfs: Remove redundant access mode checks
driver core: Check drivers_autoprobe for all added devices
driver core: WQ_PERCPU added to alloc_workqueue users
driver core: replace use of system_unbound_wq with system_dfl_wq
tick/nohz: Expose housekeeping CPUs in sysfs
tick/nohz: avoid showing '(null)' if nohz_full= not set
sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute
kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node
fs/kernfs: raise sb->maxbytes to MAX_LFS_FILESIZE
mod_devicetable: Bump auxiliary_device_id name size
sysfs: simplify attribute definition macros
samples/kobject: constify 'struct foo_attribute'
samples/kobject: add is_visible() callback to attribute group
sysfs: attribute_group: enable const variants of is_visible()
sysfs: introduce __SYSFS_FUNCTION_ALTERNATIVE()
sysfs: transparently handle const pointers in ATTRIBUTE_GROUPS()
sysfs: attribute_group: allow registration of const attribute
...
|
|
Pull IPMI updates from Corey Minyard:
"Minor IPMI fixes:
- Some device tree cleanups and a maintainer add
- Fix a race when handling channel updates that could result in
errors being reported to the user in some cases"
* tag 'for-linus-6.19-1' of https://github.com/cminyard/linux-ipmi:
MAINTAINERS: Add entry on Loongson-2K IPMI driver
dt-bindings: ipmi: Convert aspeed,ast2400-ibt-bmc to DT schema
dt-bindings: ipmi: Convert nuvoton,npcm750-kcs-bmc to DT schema
ipmi: Skip channel scan if channels are already marked ready
ipmi: Fix __scan_channels() failing to rescan channels
ipmi: Fix the race between __scan_channels() and deliver_response()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- The DELLBOSS VD SATA controller times out when sending I/Os of size
4096 KiB or larger, even though it claims LBA48 support, which per
the ACS standard requires support for a maximum command size of
65535 sectors, i.e. 32 MiB - 512. Thus, quirk the device so that it
sets a lower maximum command size (me)
* tag 'ata-6.19-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Quirk DELLBOSS VD max_sectors
ata: libata: Move quirk flags to their own enum
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull more tpm updates from Jarkko Sakkinen:
"This is targeted for tpm2-sessions updates.
There's two bug fixes and two more cosmetic tweaks for HMAC protected
sessions. They provide a baseine for further improvements to be
implemented during the the course of the release cycle"
* tag 'tpmdd-sessions-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm2-sessions: Open code tpm_buf_append_hmac_session()
tpm2-sessions: Remove 'attributes' parameter from tpm_buf_append_auth
tpm2-sessions: Fix tpm2_read_public range checks
tpm2-sessions: Fix out of range indexing in name_size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media kernel-doc fix from Mauro Carvalho Chehab:
"A fix to shut up a kernel-doc warning on c3-isp driver"
* tag 'media/v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: uapi: c3-isp: Fix documentation warning
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series.
The biggest core change is the new allocation of pseudo-devices which
allow the sending of internal commands to a given SCSI target"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits)
scsi: MAINTAINERS: Add the UFS include directory
scsi: scsi_debug: Support injecting unaligned write errors
scsi: qla2xxx: Fix improper freeing of purex item
scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB
scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify
scsi: ufs: core: Use scsi_device_busy()
scsi: ufs: core: Fix single doorbell mode support
scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users
scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users
scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users
scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users
scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users()
scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users
scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users
scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq
...
|
|
Commit f2060bdc21d7 ("nfs/localio: add refcounting for each iocb IO
associated with NFS pgio header") inadvertantly reintroduced the same
potential for __put_cred() triggering BUG_ON(cred == current->cred) that
commit 992203a1fba5 ("nfs/localio: restore creds before releasing pageio
data") fixed.
Fix this by saving and restoring the cred around each {read,write}_iter
call within the respective for loop of nfs_local_call_{read,write} using
scoped_with_creds().
NOTE: this fix started by first reverting the following commits:
94afb627dfc2 ("nfs: use credential guards in nfs_local_call_read()")
bff3c841f7bd ("nfs: use credential guards in nfs_local_call_write()")
1d18101a644e ("Merge tag 'kernel-6.19-rc1.cred' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
followed by narrowly fixing the cred lifetime issue by using
scoped_with_creds(). In doing so, this commit's changes appear more
extensive than they really are (as evidenced by comparing to v6.18's
fs/nfs/localio.c).
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/linux-next/20251205111942.4150b06f@canb.auug.org.au/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"These updates came a little late, or were based on a later 6.18-rc tag
than the others:
- A new driver for cache management on cxl devices with memory shared
in a coherent cluster. This is part of the drivers/cache/ tree, but
unlike the other drivers that back the dma-mapping interfaces, this
one is needed only during CPU hotplug.
- A shared branch for reset controllers using swnode infrastructure
- Added support for new SoC variants in the Amlogic soc_device
identification
- Minor updates in Freescale, Microchip, Samsung, and Apple SoC
drivers"
* tag 'soc-drivers-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
soc: samsung: exynos-pmu: fix device leak on regmap lookup
soc: samsung: exynos-pmu: Fix structure initialization
soc: fsl: qbman: use kmalloc_array() instead of kmalloc()
soc: fsl: qbman: add WQ_PERCPU to alloc_workqueue users
MAINTAINERS: Update email address for Christophe Leroy
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
MAINTAINERS: rename Microchip RISC-V entry
MAINTAINERS: add new soc drivers to Microchip RISC-V entry
soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC
dt-bindings: soc: microchip: document the simple-mfd syscon on PolarFire SoC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC families update from Arnd Bergmann:
"These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using custom
"Tensix" cores for computation offload managed by Linux running on
SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree"
* tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
riscv: defconfig: Enable Tenstorrent SoCs
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
