summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-20arm64: dts: meson-g12b-gtking: add initial device-treeChristian Hewitt
The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference board with an S922X chip. - 4GB LPDDR4 RAM - 64GB eMMC storage - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - HDMI 2.1 video - S/PDIF optical output - Analogue audio output - 1x USB 2.0 port - 2x USB 3.0 ports - IR receiver - 1x micro SD card slot Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200520014329.12469-4-christianshewitt@gmail.com
2020-05-20dt-bindings: arm: amlogic: add support for the Beelink GT-KingChristian Hewitt
The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference board with an S922X chip. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200520014329.12469-3-christianshewitt@gmail.com
2020-05-20arm64: dts: meson: convert ugoos-am6 to common w400 dtsiChristian Hewitt
Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create a new AM6 dts that references it. This is in preparation for several new G12B devices that will share the common w400 dtsi. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200520014329.12469-2-christianshewitt@gmail.com
2020-05-19arm64: dts: meson: add ethernet interrupt to wetek dtsiChristian Hewitt
Add Ethernet interrupt details to the WeTek Hub/Play2 dtsi to resolve an issue with Ethernet probing in mainline u-boot. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200518025451.16401-1-christianshewitt@gmail.com
2020-05-19arm64: dts: meson: add support for the Smartlabs SML-5442TWChristian Hewitt
The Smartlabs SML-5442TW is based on the Amlogic P231 reference design but with the following differences: - The Yellow and Blue LEDs are available but disabled - The Red and Green LEDs are used to signal off/on status - uart_AO can be accessed after opening the case; soldered pins exist - QCA9377 instead of the usual Ampak/Broadcom module Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200510124129.31575-4-christianshewitt@gmail.com
2020-05-19dt-bindings: arm: amlogic: add support for the Smartlabs SML-5442TWChristian Hewitt
The SML-5442TW is an STB for O2 Czech IPTV/VOD and DVB-T/T2 based on the Amlogic P231 reference design using the S905D chipset. Specs: 2GB DDR3 RAM 8GB eMMC storage 10/100 Base-T Ethernet 802.11 a/b/g/n/ac + BT 4.1 HS sdio wireless module (QCA9377) 2x single colour and 1x dual colour LEDs on the front panel 1x reset button on the front panel HDMI 2.0 (4k@60p) video Composite video + 2-channel audio output on 3.5mm jack S/PDIF audio output Single DVB-T/T2 tuner (AVL6762/MxL608) 2x USB 2.0 ports 1x micro SD card slot UART pins (internal) Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200510124129.31575-3-christianshewitt@gmail.com
2020-05-19dt-bindings: add vendor prefix for Smartlabs LLCChristian Hewitt
Smartlabs LLC are a professional integrator of Interactive TV solutions and IPTV/VOD devices [1]. [1] https://www.smartlabs.tv/en/about/ Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200510124129.31575-2-christianshewitt@gmail.com
2020-05-19arm64: dts: meson: g12: add internal DAC glueJerome Brunet
add the internal DAC glue support on the g12 and sm1 family This glue connects the different TDM interfaces of the SoC to the internal audio DAC codec. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-8-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: g12: add internal DACJerome Brunet
add internal audio DAC support on the g12 and sm1 SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-7-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-pc: add internal DAC supportJerome Brunet
Add the internal DAC support on the libretech CC. The output of this DAC is provided on the 9J4 connector. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-6-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-ac: add internal DAC supportJerome Brunet
Add the internal DAC support on the libretech CC. The output of this DAC is provided on the 9J5 connector. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-5-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-cc: add internal DAC supportJerome Brunet
Add the internal DAC support on the libretech CC. The output of this DAC is provided on the 3.5mm jack connector. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-4-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: p230-q200: add internal DAC supportJerome Brunet
Add the necessary bits to support the internal audio DAC the p230/q200 reference design derivated boards. The output of this DAC is provided on the 3.5mm jack connector Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-3-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: gxl: add acodec supportJerome Brunet
Add the internal audio DAC to the gxl SoC DT Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-2-jbrunet@baylibre.com
2020-05-19arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4Dongjin Kim
Add the board support for the Hardkernel Odroid-C4 single board computer. The Odroid-C4 is the Odroid-C2 successor with same form factor, but using a modern Amlogic S905X3 (SM1) SoC and 4x USB3 ports. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506080702.6645-3-narmstrong@baylibre.com
2020-05-19dt-bindings: arm: amlogic: add odroid-c4 bindingsNeil Armstrong
Add the board bindings for the Hardkernel Odroid-C4 single board computer. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200506080702.6645-2-narmstrong@baylibre.com
2020-05-19arm64: dts: meson-sm1: add cpu thermal nodesNeil Armstrong
Add thermal nodes for the Amlogic SM1 SoCs based on the G12A and G12B thermal nodes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200512093916.19676-3-narmstrong@baylibre.com
2020-05-19arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsiNeil Armstrong
The G12B thermal nodes should be in the meson-g12b.dtsi file. Fixes: 195f140318a9 ("arm64: dts: meson: g12b: add cooling properties") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200512093916.19676-2-narmstrong@baylibre.com
2020-05-19arm64: dts: meson: libretech-pc: add initial audio playback supportJerome Brunet
Add initial audio support limited to HDMI i2s. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-7-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-ac: add initial audio playback supportJerome Brunet
Add initial audio support limited to HDMI i2s. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-6-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-cc: add initial audio playback supportJerome Brunet
Add initial audio support limited to HDMI i2s. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-5-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: p230-q200: add initial audio playback supportJerome Brunet
Add basic audio support on the p230/q200 reference design. This initial support is limited to HDMI i2s and SPDIF (LPCM). Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-4-jbrunet@baylibre.com
2020-05-19arm64: dts: meson-gx: add aiu supportJerome Brunet
Add the AIU audio device to the Amlogic GX SoC family DT. ATM, this device provides the i2s and spdif output stages and also the hdmi and internal codec glues. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-3-jbrunet@baylibre.com
2020-05-19Merge branch 'reset/meson-gxl-dac' of git://git.pengutronix.de/pza/linux ↵Kevin Hilman
into HEAD * 'reset/meson-gxl-dac' of git://git.pengutronix.de/pza/linux: dt-bindings: reset: meson: add gxl internal dac reset
2020-05-06dt-bindings: reset: meson: add gxl internal dac resetJerome Brunet
Add the reset line of the internal DAC found on the amlogic gxl SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-04-29arm64: dts: meson: kvim3: move hdmi to tdm aJerome Brunet
The tdmout b is physically routed to the 40 pin header and the tdmout c is routed to the m2 connector. It makes these interfaces poor candidates to handle the HDMI 8ch i2s link (2ch i2s * 4 lanes) as it would force the same link format on the related connectors. Instead use the TDM A interface. This one is not routed to the outside world on the vim3, so it can only be used for HDMI. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200421141814.639480-1-jbrunet@baylibre.com
2020-04-29arm64: dts: meson: S922X: extend cpu opp-pointsTim Lewis
Add extra cpu pop points to allow mild overclock on S922X. The opp points are found in Hardkernel N2 sources [1] and testing shows no obvious issues on other S922X devices. Thermal throttling should keep things in-check if needed. [1] https://github.com/hardkernel/linux/commit/f86cd9487c7483b2a05f448b9ebacf6bd5a2ad2f Signed-off-by: Tim Lewis <elatllat@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200426162119.GA23268@imac
2020-04-29arm64: dts: meson: fix leds subnodes nameNeil Armstrong
Fix the leds subnode names to match (^led-[0-9a-f]$|led) It fixes: meson-g12b-a311d-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-g12b-s922x-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-g12b-odroid-n2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-nanopi-k2.dt.yaml: leds: 'stat' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-nexbox-a95x.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-odroidc2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-vega-s95-pro.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-vega-s95-meta.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-vega-s95-telos.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-wetek-hub.dt.yaml: leds: 'system' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxbb-wetek-play2.dt.yaml: leds: 'ethernet', 'system', 'wifi' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxl-s905x-libretech-cc.dt.yaml: leds: 'blue', 'system' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxl-s905d-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxm-rbox-pro.dt.yaml: leds: 'blue', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-gxm-s912-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-sm1-sei610.dt.yaml: leds: 'bluetooth' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' meson-sm1-khadas-vim3l.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326165958.19274-6-narmstrong@baylibre.com
2020-04-29arm64: dts: meson-gxbb-kii-pro: fix board compatibleNeil Armstrong
Remove the uneeded "amlogic,p201", "amlogic,s905" in the board compatible list. It fixes: meson-gxbb-kii-pro.dt.yaml: /: compatible: ['videostrong,kii-pro', 'amlogic,p201', 'amlogic,s905', 'amlogic,meson-gxbb'] is not valid under any of the given schemas Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326165958.19274-5-narmstrong@baylibre.com
2020-04-29arm64: dts: meson-g12b-ugoos-am6: fix board compatibleNeil Armstrong
Add missing amlogic,s922x in the board compatible list. It fixes: meson-g12b-ugoos-am6.dt.yaml: /: compatible: ['ugoos,am6', 'amlogic,g12b'] is not valid under any of the given schemas Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326165958.19274-4-narmstrong@baylibre.com
2020-04-29arm64: dts: meson: fixup SCP sram nodesNeil Armstrong
The GX and AXG SCP sram nodes were using invalid compatible and node names for the sram entries. Fixup the sram entries node names, and use proper compatible for them. It notably fixes: sram@c8000000: 'scp-shmem@0', 'scp-shmem@200' do not match any of the regexes: '^([a-z]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+' Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326165958.19274-3-narmstrong@baylibre.com
2020-04-29arm64: dts: amlogic: use the new USB control driver for GXL and GXMMartin Blumenstingl
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326134507.4808-11-narmstrong@baylibre.com
2020-04-12Linux 5.7-rc1v5.7-rc1Linus Torvalds
2020-04-12MAINTAINERS: sort field names for all entriesLinus Torvalds
This sorts the actual field names too, potentially causing even more chaos and confusion at merge time if you have edited the MAINTAINERS file. But the end result is a more consistent layout, and hopefully it's a one-time pain minimized by doing this just before the -rc1 release. This was entirely scripted: ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-12MAINTAINERS: sort entries by entry nameLinus Torvalds
They are all supposed to be sorted, but people who add new entries don't always know the alphabet. Plus sometimes the entry names get edited, and people don't then re-order the entry. Let's see how painful this will be for merging purposes (the MAINTAINERS file is often edited in various different trees), but Joe claims there's relatively few patches in -next that touch this, and doing it just before -rc1 is likely the best time. Fingers crossed. This was scripted with /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS but then I also ended up manually upper-casing a few entry names that stood out when looking at the end result. Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-12Merge tag 'x86-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of three patches to fix the fallout of the newly added split lock detection feature. It addressed the case where a KVM guest triggers a split lock #AC and KVM reinjects it into the guest which is not prepared to handle it. Add proper sanity checks which prevent the unconditional injection into the guest and handles the #AC on the host side in the same way as user space detections are handled. Depending on the detection mode it either warns and disables detection for the task or kills the task if the mode is set to fatal" * tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest KVM: x86: Emulate split-lock access as a write in emulator x86/split_lock: Provide handle_guest_split_lock()
2020-04-12Merge tag 'timers-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull time(keeping) updates from Thomas Gleixner: - Fix the time_for_children symlink in /proc/$PID/ so it properly reflects that it part of the 'time' namespace - Add the missing userns limit for the allowed number of time namespaces, which was half defined but the actual array member was not added. This went unnoticed as the array has an exessive empty member at the end but introduced a user visible regression as the output was corrupted. - Prevent further silent ucount corruption by adding a BUILD_BUG_ON() to catch half updated data. * tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ucount: Make sure ucounts in /proc/sys/user don't regress again time/namespace: Add max_time_namespaces ucount time/namespace: Fix time_for_children symlink
2020-04-12Merge tag 'sched-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes/updates from Thomas Gleixner: - Deduplicate the average computations in the scheduler core and the fair class code. - Fix a raise between runtime distribution and assignement which can cause exceeding the quota by up to 70%. - Prevent negative results in the imbalanace calculation - Remove a stale warning in the workqueue code which can be triggered since the call site was moved out of preempt disabled code. It's a false positive. - Deduplicate the print macros for procfs - Add the ucmap values to the SCHED_DEBUG procfs output for completness * tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Add task uclamp values to SCHED_DEBUG procfs sched/debug: Factor out printing formats into common macros sched/debug: Remove redundant macro define sched/core: Remove unused rq::last_load_update_tick workqueue: Remove the warning in wq_worker_sleeping() sched/fair: Fix negative imbalance in imbalance calculation sched/fair: Fix race between runtime distribution and assignment sched/fair: Align rq->avg_idle and rq->avg_scan_cost
2020-04-12Merge tag 'perf-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixes/updates for perf: - Fix the perf event cgroup tracking which tries to track the cgroup even for disabled events. - Add Ice Lake server support for uncore events - Disable pagefaults when retrieving the physical address in the sampling code" * tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Disable page faults when getting phys address perf/x86/intel/uncore: Add Ice Lake server uncore support perf/cgroup: Correct indirection in perf_less_group_idx() perf/core: Fix event cgroup tracking
2020-04-12Merge tag 'locking-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Three small fixes/updates for the locking core code: - Plug a task struct reference leak in the percpu rswem implementation. - Document the refcount interaction with PID_MAX_LIMIT - Improve the 'invalid wait context' data dump in lockdep so it contains all information which is required to decode the problem" * tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Improve 'invalid wait context' splat locking/refcount: Document interaction with PID_MAX_LIMIT locking/percpu-rwsem: Fix a task_struct refcount
2020-04-12Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Ten cifs/smb fixes: - five RDMA (smbdirect) related fixes - add experimental support for swap over SMB3 mounts - also a fix which improves performance of signed connections" * tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: enable swap on SMB3 mounts smb3: change noisy error message to FYI smb3: smbdirect support can be configured by default cifs: smbd: Do not schedule work to send immediate packet on every receive cifs: smbd: Properly process errors on ib_post_send cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending cifs: smbd: Check send queue size before posting a send cifs: smbd: Merge code to track pending packets cifs: ignore cached share root handle closing errors
2020-04-12Merge tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfix from Trond Myklebust: "Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()" * tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS: Fix RCU lock leakage
2020-04-11Merge tag 'nios2-v5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 updates from Ley Foon Tan: - Remove nios2-dev@lists.rocketboards.org from MAINTAINERS - remove 'resetvalue' property - rename 'altr,gpio-bank-width' -> 'altr,ngpio' - enable the common clk subsystem on Nios2 * tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: MAINTAINERS: Remove nios2-dev@lists.rocketboards.org arch: nios2: remove 'resetvalue' property arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio' arch: nios2: Enable the common clk subsystem on Nios2
2020-04-11Merge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: - fix an integer truncation in dma_direct_get_required_mask (Kishon Vijay Abraham) - fix the display of dma mapping types (Grygorii Strashko) * tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: fix displaying of dma allocation type dma-direct: fix data truncation in dma_direct_get_required_mask()
2020-04-11Merge tag 'kbuild-v5.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - raise minimum supported binutils version to 2.23 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports - move remaining CONFIG_AS_* tests to Kconfig from Makefile - enable -Wtautological-compare warnings to catch more issues - do not support GCC plugins for GCC <= 4.7 - fix various breakages of 'make xconfig' - include the linker version used for linking the kernel into LINUX_COMPILER, which is used for the banner, and also exposed to /proc/version - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which allows us to remove the lib-ksyms.o workaround, and to solve the last known issue of the LLVM linker - add dummy tools in scripts/dummy-tools/ to enable all compiler tests in Kconfig, which will be useful for distro maintainers - support the single switch, LLVM=1 to use Clang and all LLVM utilities instead of GCC and Binutils. - support LLVM_IAS=1 to enable the integrated assembler, which is still experimental * tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits) kbuild: fix comment about missing include guard detection kbuild: support LLVM=1 to switch the default tools to Clang/LLVM kbuild: replace AS=clang with LLVM_IAS=1 kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory kbuild: remove -I$(srctree)/tools/include from scripts/Makefile kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h Documentation/llvm: fix the name of llvm-size kbuild: mkcompile_h: Include $LD version in /proc/version kconfig: qconf: Fix a few alignment issues kconfig: qconf: remove some old bogus TODOs kconfig: qconf: fix support for the split view mode kconfig: qconf: fix the content of the main widget kconfig: qconf: Change title for the item window kconfig: qconf: clean deprecated warnings gcc-plugins: drop support for GCC <= 4.7 kbuild: Enable -Wtautological-compare x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2 crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean' ...
2020-04-11mailmap: Add Sedat Dilek (replacement for expired email address)Sedat Dilek
I do not longer work for credativ Germany. Please, use my private email address instead. This is for the case when people want to CC me on patches sent from my old business email address. Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11pNFS: Fix RCU lock leakageTrond Myklebust
Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking the RCU lock. Fixes: a9901899b649 ("pNFS: Add infrastructure for cleaning up per-layout commit structures") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-04-11KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guestXiaoyao Li
Two types of #AC can be generated in Intel CPUs: 1. legacy alignment check #AC 2. split lock #AC Reflect #AC back into the guest if the guest has legacy alignment checks enabled or if split lock detection is disabled. If the #AC is not a legacy one and split lock detection is enabled, then invoke handle_guest_split_lock() which will either warn and disable split lock detection for this task or force SIGBUS on it. [ tglx: Switch it to handle_guest_split_lock() and rename the misnamed helper function. ] Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
2020-04-11KVM: x86: Emulate split-lock access as a write in emulatorXiaoyao Li
Emulate split-lock accesses as writes if split lock detection is on to avoid #AC during emulation, which will result in a panic(). This should never occur for a well-behaved guest, but a malicious guest can manipulate the TLB to trigger emulation of a locked instruction[1]. More discussion can be found at [2][3]. [1] https://lkml.kernel.org/r/8c5b11c9-58df-38e7-a514-dc12d687b198@redhat.com [2] https://lkml.kernel.org/r/20200131200134.GD18946@linux.intel.com [3] https://lkml.kernel.org/r/20200227001117.GX9940@linux.intel.com Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115517.084300242@linutronix.de
2020-04-11x86/split_lock: Provide handle_guest_split_lock()Thomas Gleixner
Without at least minimal handling for split lock detection induced #AC, VMX will just run into the same problem as the VMWare hypervisor, which was reported by Kenneth. It will inject the #AC blindly into the guest whether the guest is prepared or not. Provide a function for guest mode which acts depending on the host SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a warning, disable SLD and mark the task accordingly. Otherwise force SIGBUS. [ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de
generated by cgit (git 2.34.1) at 2025-07-18 06:49:13 +0000