| Age | Commit message (Collapse) | Author |
|---|
|
commit 4298388574da ("net: macb: restart tx after tx used bit read")
added support for restarting transmission. Restarting tx does not work
in case controller asserts TXUBR interrupt and TQBP is already at the end
of the tx queue. In that situation, restarting tx will immediately cause
assertion of another TXUBR interrupt. The driver will end up in an infinite
interrupt loop which it cannot break out of.
For cases where TQBP is at the end of the tx queue, instead
only clear TX_USED interrupt. As more data gets pushed to the queue,
transmission will resume.
This issue was observed on a Xilinx Zynq-7000 based board.
During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes
causing CPU to stall.
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two reasons why this isn't the best idea:
- It's an odd area to grab a bit of storage space, hence it's an odd area
to grab storage from.
- It puts the 3rd io_kiocb cacheline into the hot path, where normal hot
path just needs the first two.
Use 'cflags' for joint fd/cflags storage. We only need fd until we
successfully issue, and we only need cflags once a request is done and is
completed.
Fixes: 6bf9c47a3989 ("io_uring: defer file assignment")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for fixing a regression with pulling in an extra cacheline
for IO that doesn't usually touch the last cacheline of the io_kiocb,
move the cached location of apoll->events to space shared with some other
completion data. Like cflags, this isn't used until after the request
has been completed, so we can piggy back on top of comp_list.
Fixes: 81459350d581 ("io_uring: cache req->apoll->events in req->cflags")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
-1 tells use to use the current position, but we check if the file is
a stream regardless of that. Fix up io_kiocb_update_pos() to only
dip into file if we need to. This is both more efficient and also drops
12 bytes of text on aarch64 and 64 bytes on x86-64.
Fixes: b4aec4001595 ("io_uring: do not recalculate ppos unnecessarily")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The following WARN is triggered from kvm_vm_ioctl_set_clock():
WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20
Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021
RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
Call Trace:
<TASK>
? kvm_write_guest+0x114/0x120 [kvm]
kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm]
kvm_arch_vm_ioctl+0xa26/0xc50 [kvm]
? schedule+0x4e/0xc0
? __cond_resched+0x1a/0x50
? futex_wait+0x166/0x250
? __send_signal+0x1f1/0x3d0
kvm_vm_ioctl+0x747/0xda0 [kvm]
...
The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if
mark_page_dirty() is called without an active vCPU") but the change seems
to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's
no real need to actually write to guest memory to invalidate TSC page, this
can be done by the first vCPU which goes through kvm_guest_time_update().
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220407201013.963226-1-vkuznets@redhat.com>
|
|
Since current AVIC implementation cannot support encrypted memory,
inhibit AVIC for SEV-enabled guest.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220408133710.54275-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
+new file mode 100644
+WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
+#27: FILE: Documentation/virt/kvm/x86/errata.rst:1:
Opportunistically update all other non-added KVM documents and
remove a new extra blank line at EOF for x86/errata.rst.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-5-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The tsc_scaling_sync's binary should be present in the .gitignore
file for the git to ignore it.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into HEAD
KVM/riscv fixes for 5.18, take #1
- Remove hgatp zeroing in kvm_arch_vcpu_put()
- Fix alignment of the guest_hang() in KVM selftest
- Fix PTE A and D bits in KVM selftest
- Missing #include in vcpu_fp.c
|
|
There is possible circular locking dependency detected on event_mutex
(see below logs). This is due to set fail safe mode is done at
dp_panel_read_sink_caps() within event_mutex scope. To break this
possible circular locking, this patch move setting fail safe mode
out of event_mutex scope.
[ 23.958078] ======================================================
[ 23.964430] WARNING: possible circular locking dependency detected
[ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1f69e #148 Not tainted
[ 23.977219] ------------------------------------------------------
[ 23.983570] DrmThread/1574 is trying to acquire lock:
[ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164
[ 23.997895]
[ 23.997895] but task is already holding lock:
[ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c
[ 24.012495]
[ 24.012495] which lock already depends on the new lock.
[ 24.012495]
[ 24.020886]
[ 24.020886] the existing dependency chain (in reverse order) is:
[ 24.028570]
[ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}:
[ 24.035472] __mutex_lock+0xc8/0x384
[ 24.039695] mutex_lock_nested+0x54/0x74
[ 24.044272] lock_crtcs+0x80/0x8c
[ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.053413] commit_tail+0x7c/0xfc
[ 24.057452] drm_atomic_helper_commit+0x158/0x15c
[ 24.062826] drm_atomic_commit+0x60/0x74
[ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.072508] drm_ioctl_kernel+0xe8/0x168
[ 24.077086] drm_ioctl+0x320/0x370
[ 24.081123] drm_compat_ioctl+0x40/0xdc
[ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.090895] invoke_syscall+0x80/0x114
[ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.100668] do_el0_svc_compat+0x2c/0x54
[ 24.105242] el0_svc_compat+0x4c/0xe4
[ 24.109548] el0t_32_sync_handler+0xc4/0xf4
[ 24.114381] el0t_32_sync+0x178
[ 24.118688]
[ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}:
[ 24.125408] __mutex_lock+0xc8/0x384
[ 24.129628] mutex_lock_nested+0x54/0x74
[ 24.134204] lock_crtcs+0x80/0x8c
[ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.143345] commit_tail+0x7c/0xfc
[ 24.147382] drm_atomic_helper_commit+0x158/0x15c
[ 24.152755] drm_atomic_commit+0x60/0x74
[ 24.157323] drm_atomic_helper_set_config+0x68/0x90
[ 24.162869] drm_mode_setcrtc+0x394/0x648
[ 24.167535] drm_ioctl_kernel+0xe8/0x168
[ 24.172102] drm_ioctl+0x320/0x370
[ 24.176135] drm_compat_ioctl+0x40/0xdc
[ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.185904] invoke_syscall+0x80/0x114
[ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.195673] do_el0_svc_compat+0x2c/0x54
[ 24.200241] el0_svc_compat+0x4c/0xe4
[ 24.204544] el0t_32_sync_handler+0xc4/0xf4
[ 24.209378] el0t_32_sync+0x174/0x178
[ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}:
[ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878
[ 24.225951] ww_mutex_lock+0x60/0xd0
[ 24.230166] modeset_lock+0x190/0x19c
[ 24.234467] drm_modeset_lock+0x34/0x54
[ 24.238953] drmm_mode_config_init+0x550/0x764
[ 24.244065] msm_drm_bind+0x170/0x59c
[ 24.248374] try_to_bring_up_master+0x244/0x294
[ 24.253572] __component_add+0xf4/0x14c
[ 24.258057] component_add+0x2c/0x38
[ 24.262273] dsi_dev_attach+0x2c/0x38
[ 24.266575] dsi_host_attach+0xc4/0x120
[ 24.271060] mipi_dsi_attach+0x34/0x48
[ 24.275456] devm_mipi_dsi_attach+0x28/0x68
[ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc
[ 24.285137] auxiliary_bus_probe+0x78/0x90
[ 24.289893] really_probe+0x1e4/0x3d8
[ 24.294194] __driver_probe_device+0x14c/0x164
[ 24.299298] driver_probe_device+0x54/0xf8
[ 24.304043] __device_attach_driver+0xb4/0x118
[ 24.309145] bus_for_each_drv+0xb0/0xd4
[ 24.313628] __device_attach+0xcc/0x158
[ 24.318112] device_initial_probe+0x24/0x30
[ 24.322954] bus_probe_device+0x38/0x9c
[ 24.327439] deferred_probe_work_func+0xd4/0xf0
[ 24.332628] process_one_work+0x2f0/0x498
[ 24.337289] process_scheduled_works+0x44/0x48
[ 24.342391] worker_thread+0x1e4/0x26c
[ 24.346788] kthread+0xe4/0xf4
[ 24.350470] ret_from_fork+0x10/0x20
[ 24.354683]
[ 24.354683]
[ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}:
[ 24.361489] drm_modeset_acquire_init+0xe4/0x138
[ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114
[ 24.372327] check_connector_changed+0xbc/0x198
[ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c
[ 24.382804] dsi_hpd_worker+0x24/0x30
[ 24.387104] process_one_work+0x2f0/0x498
[ 24.391762] worker_thread+0x1d0/0x26c
[ 24.396158] kthread+0xe4/0xf4
[ 24.399840] ret_from_fork+0x10/0x20
[ 24.404053]
[ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}:
[ 24.411032] __mutex_lock+0xc8/0x384
[ 24.415247] mutex_lock_nested+0x54/0x74
[ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c
[ 24.425108] dp_display_process_hpd_high+0x34/0xd4
[ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c
[ 24.436205] hpd_event_thread+0x2ac/0x550
[ 24.440864] kthread+0xe4/0xf4
[ 24.444544] ret_from_fork+0x10/0x20
[ 24.448757]
[ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}:
[ 24.455116] __lock_acquire+0xe2c/0x10d8
[ 24.459690] lock_acquire+0x1ac/0x2d0
[ 24.463988] __mutex_lock+0xc8/0x384
[ 24.468201] mutex_lock_nested+0x54/0x74
[ 24.472773] msm_dp_display_enable+0x58/0x164
[ 24.477789] dp_bridge_enable+0x24/0x30
[ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c
[ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244
[ 24.494801] msm_atomic_commit_tail+0x248/0x3d0
[ 24.499992] commit_tail+0x7c/0xfc
[ 24.504031] drm_atomic_helper_commit+0x158/0x15c
[ 24.509404] drm_atomic_commit+0x60/0x74
[ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.519079] drm_ioctl_kernel+0xe8/0x168
[ 24.523650] drm_ioctl+0x320/0x370
[ 24.527689] drm_compat_ioctl+0x40/0xdc
[ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.537463] invoke_syscall+0x80/0x114
[ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.547235] do_el0_svc_compat+0x2c/0x54
[ 24.551806] el0_svc_compat+0x4c/0xe4
[ 24.556106] el0t_32_sync_handler+0xc4/0xf4
[ 24.560948] el0t_32_sync+0x174/0x178
Changes in v2:
-- add circular lockiing trace
Fixes: d4aca422539c ("drm/msm/dp: always add fail-safe mode into connector mode list")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481396/
Link: https://lore.kernel.org/r/1649451894-554-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The member 'msm_dsi->connector' isn't assigned until
msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and
how it assigns the return value). Therefore this pointer is going to be
NULL here. Let's use 'connector' which is what was intended.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 6d5e78406991 ("drm/msm/dsi: Move dsi panel init into modeset init path")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/478693/
Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Even if some IOMMU has registered itself on the platform "bus", that
doesn't necessarily mean it provides translation for the device we
care about. Replace iommu_present() with a more appropriate check.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/480707/
Link: https://lore.kernel.org/r/5ab4f4574d7f3e042261da702d493ee40d003356.1649168268.git.robin.murphy@arm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Besides, since mdp5_plane_reset() is void type, so we should better
set `plane-state` to NULL after releasing it.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481055/
Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The fourth param is size, rather than range_end.
Note that we could increase the address space size if we had a way to
prevent buffers from spanning a 4G split, mostly just to avoid fw bugs
with 64b math.
Fixes: 84c31ee16f90 ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220407202836.1211268-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
kongweibin reported a kernel panic in ip6_forward() when input interface
has no in6 dev associated.
The following tc commands were used to reproduce this panic:
tc qdisc del dev vxlan100 root
tc qdisc add dev vxlan100 root netem corrupt 5%
CC: stable@vger.kernel.org
Fixes: ccd27f05ae7b ("ipv6: fix 'disable_policy' for fwd packets")
Reported-by: kongweibin <kongweibin2@huawei.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both of of_get_parent() and of_parse_phandle() return node pointer with
refcount incremented, use of_node_put() on it to decrease refcount
when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cgroupv2 helper function ignores the already-looked up sk
and uses skb->sk instead.
Just pass sk from the calling function instead; this will
make cgroup matching work for udp and tcp in input even when
edemux did not set skb->sk already.
Fixes: e0bb96db96f8 ("netfilter: nft_socket: add support for cgroupsv2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Don't use sizeof(pointer) when calculating scnprintf offset.
Fixes: 01f84f0ed3b4 ("mac80211: reduce stack usage in debugfs")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220406175659.20611-1-greearb@candelatech.com
[correct the Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Synchronize additions to nontrans_list of transmitting BSS with
bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails
__cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert
on bss_lock). So protect the whole block with bss_lock to avoid
races and warnings. Found during code review.
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We need this to be at least two bytes, so we can access
alpha2[0] and alpha2[1]. It may be three in case some
userspace used NUL-termination since it was NLA_STRING
(and we also push it out with NUL-termination).
Cc: stable@vger.kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220411114201.fd4a31f06541.Ie7ff4be2cf348d8cc28ed0d626fc54becf7ea799@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A user may set the SO_TXTIME socket option to ensure a packet is send
at a given time. The taprio scheduler has to confirm, that it is allowed
to send a packet at that given time, by a check against the packet time
schedule. The scheduler drop the packet, if the gates are closed at the
given send time.
The check, if SO_TXTIME is set, may fail since sk_flags are part of an
union and the union is used otherwise. This happen, if a socket is not
a full socket, like a request socket for example.
Add a check to verify, if the union is used for sk_flags.
Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using a fixed-link, the altr_tse_pcs driver crashes
due to null-pointer dereference as no phy_device is provided to
tse_pcs_fix_mac_speed function. Fix this by adding a check for
phy_dev before calling the tse_pcs_fix_mac_speed() function.
Also clean up the tse_pcs_fix_mac_speed function a bit. There is
no need to check for splitter_base and sgmii_adapter_base
because the driver will fail if these 2 variables are not
derived from the device tree.
Fixes: fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the T1 phy master/slave state is changed, at the end of config_aneg
function genphy_softreset is called. After the reset all the registers
configured during the config_init are restored to default value.
To avoid this, removed the genphy_softreset call.
v1->v2
------
Added the author in cc
Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A microcode update on some Intel processors causes all TSX transactions
to always abort by default[*]. Microcode also added functionality to
re-enable TSX for development purposes. With this microcode loaded, if
tsx=on was passed on the cmdline, and TSX development mode was already
enabled before the kernel boot, it may make the system vulnerable to TSX
Asynchronous Abort (TAA).
To be on safer side, unconditionally disable TSX development mode during
boot. If a viable use case appears, this can be revisited later.
[*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557
[ bp: Drop unstable web link, massage heavily. ]
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
|
|
If CPUs on a node are offline at boot time, the number of nodes is
different when building affinity masks for present cpus and when building
affinity masks for possible cpus. This causes the following problem:
In the case that the number of vectors is less than the number of nodes
there are cases where bits of masks for present cpus are overwritten when
building masks for possible cpus.
Fix this by excluding CPUs, which are not part of the current build mask
(present/possible).
[ tglx: Massaged changelog and added comment ]
Fixes: b82592199032 ("genirq/affinity: Spread IRQs to all available NUMA nodes")
Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220331003309.10891-1-yamamoto.rei@jp.fujitsu.com
|
|
tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and
CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use
MSR_IA32_TSX_CTRL when supported.
[ bp: Document how and why TSX gets disabled. ]
Fixes: 293649307ef9 ("x86/tsx: Clear CPUID bits when TSX always force aborts")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com
|
|
For this specific device on Lenovo Thinkpad X12 tablet, the verbs were
dumped by qemu running a guest OS that init this codec properly.
After studying the dump, it turns out that
the same quirk used by the other Lenovo devices can be reused.
The patch was tested working against the mainline kernel.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tao Jin <tao-j@outlook.com>
Link: https://lore.kernel.org/r/CO6PR03MB6241CD73310B37858FE64C85E1E89@CO6PR03MB6241.namprd03.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Syzbot reports "KASAN: null-ptr-deref Write in
snd_pcm_format_set_silence".[1]
It is due to missing validation of the "silence" field of struct
"pcm_format_data" in "pcm_formats" array.
Add a test for valid "pat" and, if it is not so, return -EINVAL.
[1] https://lore.kernel.org/lkml/000000000000d188ef05dc2c7279@google.com/
Reported-and-tested-by: syzbot+205eb15961852c2c5974@syzkaller.appspotmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220409012655.9399-1-fmdefrancesco@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The intent of the version check in the mmap ioctl was to maintain
support for existing platforms (i.e., ADL/RPL and earlier), but drop
support on all future igpu platforms. As we've seen on the dgpu side,
the hardware teams are using a more fine-grained numbering system for IP
version numbers these days, so it's possible the version number
associated with our next igpu could be some form of "12.xx" rather than
13 or higher. Comparing against the full ver.release number will ensure
the intent of the check is maintained no matter what numbering the
hardware teams settle on.
Fixes: d3f3baa3562a ("drm/i915: Reinstate the mmap ioctl for some platforms")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407161839.1073443-1-matthew.d.roper@intel.com
(cherry picked from commit 8e7e5c077cd57ee9a36d58c65f07257dc49a88d5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Give applications a way to tell if the kernel supports sane linked files,
as in files being assigned at the right time to be able to reliably
do <open file direct into slot X><read file from slot X> while using
IOSQE_IO_LINK to order them.
Not really a bug fix, but flag it as such so that it gets pulled in with
backports of the deferred file assignment.
Fixes: 6bf9c47a3989 ("io_uring: defer file assignment")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"This is a single serial driver fix for a build issue that showed up
due to changes that came in through the tty tree in 5.18-rc1 that were
missed previously. It resolves a build error with the mpc52xx_uart
driver.
It has been in linux-next this week with no reported problems"
* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 5.18-rc2 that resolves an
endian issue for the r8188eu driver. It has been in linux-next all
this week with no reported problems"
* tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Fix PPPoE tag insertion on little endian systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are two small driver core changes for 5.18-rc2.
They are the final bits in the removal of the default_attrs field in
struct kobj_type. I had to wait until after 5.18-rc1 for all of the
changes to do this came in through different development trees, and
then one new user snuck in. So this series has two changes:
- removal of the default_attrs field in the powerpc/pseries/vas code.
The change has been acked by the PPC maintainers to come through
this tree
- removal of default_attrs from struct kobj_type now that all
in-kernel users are removed.
This cleans up the kobject code a little bit and removes some
duplicated functionality that confused people (now there is only
one way to do default groups)
Both of these have been in linux-next for all of this week with no
reported problems"
* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kobject: kobj_type: remove default_attrs
powerpc/pseries/vas: use default_groups in kobj_type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fix from Greg KH:
"A single driver fix. It resolves the build warning issue on 32bit
systems in the habannalabs driver that came in during the 5.18-rc1
merge cycle.
It has been in linux-next for all this week with no reported problems"
* tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Fix test build failures
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
guest could be lost (or delayed until the next guest exit).
- Disable SCV (system call vectored) when PR KVM guests could be run.
- Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
guests.
- Add a new KVM CAP to indicate if AIL == 3 is supported.
- Fix a regression when hotplugging a CPU to a memoryless/cpuless node.
- Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
fixes crashes seen due to hardened usercopy.
- Revert a change to max_mapnr which broke HIGHMEM.
Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.
* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: Set max_mapnr correctly"
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
powerpc/numa: Handle partially initialized numa nodes
powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
KVM: PPC: Book3S PR: Disallow AIL != 0
KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
KVM: PPC: Book3S HV P9: Fix "lost kick" race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of interrupt chip driver fixes:
- A fix for a long standing bug in the ARM GICv3 redistributor
polling which uses the wrong bit number to test.
- Prevent translation of bogus ACPI table entries which map device
interrupts into the IPI space on ARM GICs.
- Don't write into the pending register of ARM GICV4 before the scan
in hardware has completed.
- A set of build and correctness fixes for the Qualcomm MPM driver"
* tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic, gic-v3: Prevent GSI to SGI translations
irqchip/gic-v3: Fix GICR_CTLR.RWP polling
irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling
irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init()
irq/qcom-mpm: Fix build error without MAILBOX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the MSI message data struct definition
- Use local labels in the exception table macros to avoid symbol
conflicts with clang LTO builds
- A couple of fixes to objtool checking of the relatively newly added
SLS and IBT code
- Rename a local var in the WARN* macro machinery to prevent shadowing
* tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msi: Fix msi message data shadow struct
x86/extable: Prefer local labels in .set directives
x86,bpf: Avoid IBT objtool warning
objtool: Fix SLS validation for kcov tail-call replacement
objtool: Fix IBT tail-call detection
x86/bug: Prevent shadowing in __WARN_FLAGS
x86/mm/tlb: Revert retpoline avoidance approach
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- A couple of fixes to cgroup-related handling of perf events
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly
at fork()
- Add support for a new Raptor Lake CPU
* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Always set cpuctx cgrp when enable cgroup event
perf/core: Fix perf_cgroup_switch()
perf/core: Use perf_cgroup_info->active to check if cgroup is active
perf/core: Don't pass task around when ctx sched in
perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
perf/x86/intel: Don't extend the pseudo-encoding to GP counters
perf/core: Inherit event_caps
perf/x86/uncore: Add Raptor Lake uncore support
perf/x86/msr: Add Raptor Lake CPU support
perf/x86/cstate: Add Raptor Lake support
perf/x86: Add Intel Raptor Lake support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Allow the compiler to optimize away unused percpu accesses and change
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/page_alloc: mark pagesets as __maybe_unused"
Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
x86/percpu: Remove volatile from arch_raw_cpu_ptr().
static_call: Remove __DEFINE_STATIC_CALL macro
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
static_call: Don't make __static_call_return0 static
x86,static_call: Fix __static_call_return0 for i386
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Use the correct static key checking primitive on the IRQ exit path
- Two fixes for the new forceidle balancer
* tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix compile error in dynamic_irqentry_exit_cond_resched()
sched: Teach the forced-newidle balancer about CPU affinity limitation.
sched/core: Fix forceidle balancing
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The ieee80211_tx_info_clear_status() helper also clears the rate counts and
the driver-private part of struct ieee80211_tx_info, so using it breaks
quite a few other things. So back out of using it, and instead define a
ath-internal helper that only clears the area between the
status_driver_data and the rates info. Combined with moving the
ath_frame_info struct to status_driver_data, this avoids clearing anything
we shouldn't be, and so we can keep the existing code for handling the rate
information.
While fixing this I also noticed that the setting of
tx_info->status.rates[tx_rateindex].count on hardware underrun errors was
always immediately overridden by the normal setting of the same fields, so
rearrange the code so that the underrun detection actually takes effect.
The new helper could be generalised to a 'memset_between()' helper, but
leave it as a driver-internal helper for now since this needs to go to
stable.
Cc: stable@vger.kernel.org
Reported-by: Peter Seiderer <ps.report@gmx.net>
Fixes: 037250f0a45c ("ath9k: Properly clear TX status area before reporting to mac80211")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220404204800.2681133-1-toke@toke.dk
|
|
Fix:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant
case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
^~~~
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant
case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
^~~~
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: netdev@vger.kernel.org
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic
|
|
Fix:
drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Shayne Chen <shayne.chen@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220405151517.29753-9-bp@alien8.de
|
|
Fixes the following W=1 kernel build warning:
kernel/time/tick-sched.c:1563: warning: This comment starts with '/**',
but isn't a kernel-doc comment.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220214084739.63228-1-jiapeng.chong@linux.alibaba.com
|
|
While running some testing on code that happened to allow the variable
tick_nohz_full_running to get set but with no "possible" NOHZ cores to
back up that setting, this warning triggered:
if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
WARN_ON(tick_nohz_full_running);
The console was overwhemled with an endless stream of one WARN per tick
per core and there was no way to even see what was going on w/o using a
serial console to capture it and then trace it back to this.
Change it to WARN_ON_ONCE().
Fixes: 08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211206145950.10927-3-paul.gortmaker@windriver.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix the clang command line option probing and remove some options to
filter out, fixing the build with the latest clang versions
- Fix 'perf bench' futex and epoll benchmarks to deal with machines
with more than 1K CPUs
- Fix 'perf test tsc' error message when not supported
- Remap perf ring buffer if there is no space for event, fixing perf
usage in 32-bit ChromeOS
- Drop objdump stderr to avoid getting stuck waiting for stdout output
in 'perf annotate'
- Fix up garbled output by now showing unwind error messages when
augmenting frame in best effort mode
- Fix perf's libperf_print callback, use the va_args eprintf() variant
- Sync vhost and arm64 cputype headers with the kernel sources
- Fix 'perf report --mem-mode' with ARM SPE
- Add missing external commands ('iiostat', etc) to 'perf --list-cmds'
* tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output
perf tools: Add external commands to list-cmds
perf docs: Add perf-iostat link to manpages
perf session: Remap buf if there is no space for event
perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K
perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K
perf tools: Fix perf's libperf_print callback
perf: arm-spe: Fix perf report --mem-mode
perf unwind: Don't show unwind error messages when augmenting frame pointer stack
tools headers arm64: Sync arm64's cputype.h with the kernel sources
perf test tsc: Fix error message when not supported
perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13
perf python: Fix probing for some clang command line options
tools build: Filter out options and warnings not supported by clang
tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
tools include UAPI: Sync linux/vhost.h with the kernel sources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull cxl and nvdimm fixes from Dan Williams:
- Fix a compile error in the nvdimm unit tests
- Fix a shadowed variable warning in the CXL PCI driver
* tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/pci: Drop shadowed variable
tools/testing/nvdimm: Fix security_init() symbol collision
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix a race condition with consumers accessing the fields of GPIO IRQ
chips before they're fully initialized
* tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: Restrict usage of GPIO chip irq members before initialization
|
