summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-30dpaa_eth: DPAA SGT needs to be 256BMadalin Bucur
The DPAA HW requires that at least 256 bytes from the start of the first scatter-gather table entry are allocated and accessible. The hardware reads the maximum size the table can have in one access, thus requiring that the allocation and mapping to be done for the maximum size of 256B even if there is a smaller number of entries in the table. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30fsl/fman: fix parser reporting bad checksum on short framesMadalin Bucur
The FMan hardware parser needs to be configured to remove the short frame padding from the checksum calculation, otherwise short UDP and TCP frames are likely to be marked as having a bad checksum. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30bnx2x: Fix receiving tx-timeout in error or recovery state.Sudarsana Reddy Kalluru
Driver performs the internal reload when it receives tx-timeout event from the OS. Internal reload might fail in some scenarios e.g., fatal HW issues. In such cases OS still see the link, which would result in undesirable functionalities such as re-generation of tx-timeouts. The patch addresses this issue by indicating the link-down to OS when tx-timeout is detected, and keeping the link in down state till the internal reload is successful. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30cnic: tidy up a size calculationDan Carpenter
Static checkers complain that id_tbl->table points to longs and 4 bytes is smaller than sizeof(long). But the since other side is dividing by 32 instead of sizeof(long), that means the current code works fine. Anyway, it's more conventional to use the BITS_TO_LONGS() macro when we're allocating a bitmap. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30atm: iphase: fix a 64 bit bugDan Carpenter
The code assumes that there is 4 bytes in a pointer and it doesn't allocate enough memory. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30tcp: fix Fast Open key endiannessYuchung Cheng
Fast Open key could be stored in different endian based on the CPU. Previously hosts in different endianness in a server farm using the same key config (sysctl value) would produce different cookies. This patch fixes it by always storing it as little endian to keep same API for LE hosts. Reported-by: Daniele Iamartino <danielei@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29Merge tag 'powerpc-4.18-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two regression fixes, and a new syscall wire-up: - A fix for the recent conversion to time64_t in the powermac RTC routines, which caused time to go backward. - Another fix for fallout from the split PMD PTL conversion. - Wire up the new io_pgetevents() syscall. Thanks to: Aneesh Kumar K.V, Arnd Bergmann, Breno Leitao, Mathieu Malaterre" * tag 'powerpc-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powermac: Fix rtc read/write functions powerpc/mm/32: Fix pgtable_page_dtor call powerpc: Wire up io_pgetevents
2018-06-29Merge tag 'davinci-fixes-for-v4.18' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes This fixes polarity of SD card write-protect pin on DA850 EVM and fixes interrupt property for DA850 SoC GPIO as defined in device-tree. Both of these are not introduced with v4.18 merge but have existed prior. * tag 'davinci-fixes-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850: Fix interrups property for gpio ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-29Merge tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson
into fixes ARM64: hisi fixes for 4.18 - Added power capabilities for the mmc host controller on the hikey and hikey960 boards to avoid broken wifi. * tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi: arm64: dts: hikey960: Define wl1837 power capabilities arm64: dts: hikey: Define wl1835 power capabilities Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-29Merge tag 'amlogic-fixes' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes Amlogic fixes for v4.18-rc - minor 64-bit DT fixes * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxl: fix Mali GPU compatible string ARM64: dts: meson-axg: fix ethernet stability issue ARM64: dts: meson-gx: fix ATF reserved memory region ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0 ARM64: dts: meson: fix register ranges for SD/eMMC ARM64: dts: meson: disable sd-uhs modes on the libretech-cc Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-29Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - The alternatives patching code uses flush_icache_range() which itself uses alternatives. Change the code to use an unpatched variant of cache maintenance - Remove unnecessary ISBs from set_{pte,pmd,pud} - perf: xgene_pmu: Fix IOB SLOW PMU parser error * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Remove unnecessary ISBs from set_{pte,pmd,pud} arm64: Avoid flush_icache_range() in alternatives patching code drivers/perf: xgene_pmu: Fix IOB SLOW PMU parser error
2018-06-29Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - a revert because of bugzilla #200045 (and some documentation about it) - another regression fix in the i2c-gpio driver - a leak fix for the i2c core * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: gpio: initialize SCL to HIGH again i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfers i2c: algos: bit: mention our experience about initial states Revert "i2c: algo-bit: init the bus to a known state"
2018-06-29Merge tag 'ceph-for-4.18-rc3' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "A trivial dentry leak fix from Zheng" * tag 'ceph-for-4.18-rc3' of git://github.com/ceph/ceph-client: ceph: fix dentry leak in splice_dentry()
2018-06-29Merge branch 'bpf-fixes'Alexei Starovoitov
Daniel Borkmann says: ==================== This set contains three fixes that are mostly JIT and set_memory_*() related. The third in the series in particular fixes the syzkaller bugs that were still pending; aside from local reproduction & testing, also 'syz test' wasn't able to trigger them anymore. I've tested this series on x86_64, arm64 and s390x, and kbuild bot wasn't yelling either for the rest. For details, please see patches as usual, thanks! ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-29bpf: undo prog rejection on read-only lock failureDaniel Borkmann
Partially undo commit 9facc336876f ("bpf: reject any prog that failed read-only lock") since it caused a regression, that is, syzkaller was able to manage to cause a panic via fault injection deep in set_memory_ro() path by letting an allocation fail: In x86's __change_page_attr_set_clr() it was able to change the attributes of the primary mapping but not in the alias mapping via cpa_process_alias(), so the second, inner call to the __change_page_attr() via __change_page_attr_set_clr() had to split a larger page and failed in the alloc_pages() with the artifically triggered allocation error which is then propagated down to the call site. Thus, for set_memory_ro() this means that it returned with an error, but from debugging a probe_kernel_write() revealed EFAULT on that memory since the primary mapping succeeded to get changed. Therefore the subsequent hdr->locked = 0 reset triggered the panic as it was performed on read-only memory, so call-site assumptions were infact wrong to assume that it would either succeed /or/ not succeed at all since there's no such rollback in set_memory_*() calls from partial change of mappings, in other words, we're left in a state that is "half done". A later undo via set_memory_rw() is succeeding though due to matching permissions on that part (aka due to the try_preserve_large_page() succeeding). While reproducing locally with explicitly triggering this error, the initial splitting only happens on rare occasions and in real world it would additionally need oom conditions, but that said, it could partially fail. Therefore, it is definitely wrong to bail out on set_memory_ro() error and reject the program with the set_memory_*() semantics we have today. Shouldn't have gone the extra mile since no other user in tree today infact checks for any set_memory_*() errors, e.g. neither module_enable_ro() / module_disable_ro() for module RO/NX handling which is mostly default these days nor kprobes core with alloc_insn_page() / free_insn_page() as examples that could be invoked long after bootup and original 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks") did neither when it got first introduced to BPF so "improving" with bailing out was clearly not right when set_memory_*() cannot handle it today. Kees suggested that if set_memory_*() can fail, we should annotate it with __must_check, and all callers need to deal with it gracefully given those set_memory_*() markings aren't "advisory", but they're expected to actually do what they say. This might be an option worth to move forward in future but would at the same time require that set_memory_*() calls from supporting archs are guaranteed to be "atomic" in that they provide rollback if part of the range fails, once that happened, the transition from RW -> RO could be made more robust that way, while subsequent RO -> RW transition /must/ continue guaranteeing to always succeed the undo part. Reported-by: syzbot+a4eb8c7766952a1ca872@syzkaller.appspotmail.com Reported-by: syzbot+d866d1925855328eac3b@syzkaller.appspotmail.com Fixes: 9facc336876f ("bpf: reject any prog that failed read-only lock") Cc: Laura Abbott <labbott@redhat.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-29bpf, s390: fix potential memleak when later bpf_jit_prog failsDaniel Borkmann
If we would ever fail in the bpf_jit_prog() pass that writes the actual insns to the image after we got header via bpf_jit_binary_alloc() then we also need to make sure to free it through bpf_jit_binary_free() again when bailing out. Given we had prior bpf_jit_prog() passes to initially probe for clobbered registers, program size and to fill in addrs arrray for jump targets, this is more of a theoretical one, but at least make sure this doesn't break with future changes. Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-29bpf, arm32: fix to use bpf_jit_binary_lock_ro apiDaniel Borkmann
Any eBPF JIT that where its underlying arch supports ARCH_HAS_SET_MEMORY would need to use bpf_jit_binary_{un,}lock_ro() pair instead of the set_memory_{ro,rw}() pair directly as otherwise changes to the former might break. arm32's eBPF conversion missed to change it, so fix this up here. Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-29parisc: Build kernel without -ffunction-sectionsHelge Deller
As suggested by Nick Piggin it seems we can drop the -ffunction-sections compile flag, now that the kernel uses thin archives. Testing with 32- and 64-bit kernel showed no difference in kernel size. Suggested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2018-06-29sg: remove ->sg_magic memberJens Axboe
This was introduced more than a decade ago when sg chaining was added, but we never really caught anything with it. The scatterlist entry size can be critical, since drivers allocate it, so remove the magic member. Recently it's been triggering allocation stalls and failures in NVMe. Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-29Merge tag 'pci-v4.18-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix crash caused by endpoint library initialization order change (Alan Douglas) - Fix shpchp NULL pointer dereference regression on non-ACPI platforms (Bjorn Helgaas) - Move PCI_DOMAINS selection to fix build regression (Lorenzo Pieralisi) * tag 'pci-v4.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: controller: Move PCI_DOMAINS selection to arch Kconfig PCI: Initialize endpoint library before controllers PCI: shpchp: Manage SHPC unconditionally on non-ACPI systems
2018-06-29Merge tag 'pm-4.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix up recently added features (the Kryo cpufreq driver and performance states coverage in the generic power domains framework), add missing documentation for a recently added sysfs knob in the intel_pstate driver and fix an error in its documentation. Specifics: - Fix the initialization time error handling in the recently added Kryo cpufreq driver (Dan Carpenter). - Fix up the recently added coverage of performance states in the generic power domains (genpd) framework (Viresh Kumar). - Add missing documentation of the new hwp_dynamic_boost sysfs knob in the intel_pstate driver (Rafael Wysocki). - Fix incorrect sysfs path in the intel_pstate driver documentation (Rafael Wysocki)" * tag 'pm-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation: intel_pstate: Describe hwp_dynamic_boost sysfs knob Documentation: admin-guide: intel_pstate: Fix sysfs path PM / Domains: Rename opp_node to np PM / Domains: Fix return value of of_genpd_opp_to_performance_state() cpufreq: qcom-kryo: Fix error handling in probe()
2018-06-29Merge tag 'drm-fixes-2018-06-29' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing too major this round: - small set of mali-dp fixes - single meson fix - a bunch of amdgpu fixes (one makes non-4k page sizes not be a bad experience)" * tag 'drm-fixes-2018-06-29' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: release spinlock before committing updates to stream drm/amdgpu:Support new VCN FW version naming convention drm/amdgpu: fix UBSAN: Undefined behaviour for amdgpu_fence.c drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()' drm/amdgpu: GPU vs CPU page size fixes in amdgpu_vm_bo_split_mapping drm/amdgpu: Count disabled CRTCs in commit tail earlier drm/mali-dp: Rectify the width and height passed to rotmem_required() drm/arm/malidp: Preserve LAYER_FORMAT contents when setting format drm: mali-dp: Enable Global SE interrupts mask for DP500 drm/arm/malidp: Ensure that the crtcs are shutdown before removing any encoder/connector
2018-06-29Merge tag 'for-4.18/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix dm core to use more efficient bio_split() instead of bio_clone_bioset(). Also fixes splitting bio that has integrity payload. - Three fixes related to properly validating DAX capabilities of a stacked DM device that will advertise DAX support. - Update DM writecache target to use 2-factor allocator arguments. Kees says this is the last related change for 4.18. - Fix DM zoned target to use GFP_NOIO to avoid triggering reclaim during IO submission (caught by lockdep). - Fix DM thinp to gracefully recover from running out of data space while a previous async discard completes (whereby freeing space). - Fix DM thinp's metadata transaction commit to avoid needless work. * tag 'for-4.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: prevent DAX mounts if not supported dax: check for QUEUE_FLAG_DAX in bdev_dax_supported() pmem: only set QUEUE_FLAG_DAX for fsdax mode dm thin: handle running out of data space vs concurrent discard dm raid: don't use 'const' in function return dm zoned: avoid triggering reclaim from inside dmz_map() dm writecache: use 2-factor allocator arguments dm thin metadata: remove needless work from __commit_transaction dm: use bio_split() when splitting out the already processed bio
2018-06-29Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull single NVMe fix from Christoph. * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-rdma: fix possible double free of controller async event buffer
2018-06-29drbd: Fix drbd_request_prepare() discard handlingBart Van Assche
Fix the test that verifies whether bio_op(bio) represents a discard or write zeroes operation. Compile-tested only. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Fixes: 7435e9018f91 ("drbd: zero-out partial unaligned discards on local backend") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-29blk-mq: don't queue more if we get a busy returnJens Axboe
Some devices have different queue limits depending on the type of IO. A classic case is SATA NCQ, where some commands can queue, but others cannot. If we have NCQ commands inflight and encounter a non-queueable command, the driver returns busy. Currently we attempt to dispatch more from the scheduler, if we were able to queue some commands. But for the case where we ended up stopping due to BUSY, we should not attempt to retrieve more from the scheduler. If we do, we can get into a situation where we attempt to queue a non-queueable command, get BUSY, then successfully retrieve more commands from that scheduler and queue those. This can repeat forever, starving the non-queuable command indefinitely. Fix this by NOT attempting to pull more commands from the scheduler, if we get a BUSY return. This should also be more optimal in terms of letting requests stay in the scheduler for as long as possible, if we get a BUSY due to the regular out-of-tags condition. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-29aio: mark __aio_sigset::sigmask constAvi Kivity
io_pgetevents() will not change the signal mask. Mark it const to make it clear and to reduce the need for casts in user code. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Avi Kivity <avi@scylladb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [hch: reapply the patch that got incorrectly reverted] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-29net: handle NULL ->poll gracefullyChristoph Hellwig
The big aio poll revert broke various network protocols that don't implement ->poll as a patch in the aio poll serie removed sock_no_poll and made the common code handle this case. Reported-by: syzbot+57727883dbad76db2ef0@syzkaller.appspotmail.com Reported-by: syzbot+cdb0d3176b53d35ad454@syzkaller.appspotmail.com Reported-by: syzbot+2c7e8f74f8b2571c87e8@syzkaller.appspotmail.com Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Fixes: a11e1d432b51 ("Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-29Merge tag 'mac80211-for-davem-2018-06-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just three fixes: * fix HT operation in mesh mode * disable preemption in control frame TX * check nla_parse_nested() return values where missing (two places) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net, mm: account sock objects to kmemcgShakeel Butt
Currently the kernel accounts the memory for network traffic through mem_cgroup_[un]charge_skmem() interface. However the memory accounted only includes the truesize of sk_buff which does not include the size of sock objects. In our production environment, with opt-out kmem accounting, the sock kmem caches (TCP[v6], UDP[v6], RAW[v6], UNIX) are among the top most charged kmem caches and consume a significant amount of memory which can not be left as system overhead. So, this patch converts the kmem caches of all sock objects to SLAB_ACCOUNT. Signed-off-by: Shakeel Butt <shakeelb@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29drm/exynos: ipp: use correct enum typeStefan Agner
The limit_id_fallback array uses enum drm_ipp_size_id to index its content. The content itself is of type enum drm_exynos_ipp_limit_type. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: decon5433: Fix WINCONx reset valueMarek Szyprowski
The only bits that should be preserved in decon_win_set_fmt() is WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and are set by the mentioned function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: decon5433: Fix per-plane global alpha for XRGB modesMarek Szyprowski
Set per-plane global alpha to maximum value to get proper blending of XRGB and ARGB planes. This fixes the strange order of overlapping planes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: fimc: Use real buffer width for configuring the hardwareMarek Szyprowski
DMA hardware should respect buffer pitch, so use the width calculated from the buffer pitch instead of the virtual one. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modesMarek Szyprowski
Fix following issues related to planar YUV pixel format configuration: - NV16/61 modes were incorrectly programmed as NV12/21, - YVU420 was programmed as YUV420 on source, - YVU420 and YUV422 were programmed as YUV420 on output. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Fix DRM_MODE_REFLECT_{X,Y} interpretationMarek Szyprowski
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip were swapped in GScaler driver. Fix this by swapping code for interpreting them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Increase Exynos5433 buffer width alignment to 16 pixelsMarek Szyprowski
Investigation revealed that GScaler hardware requires the real buffer width (pitch) to be aligned to 16 pixels. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: gsc: Use real buffer width for configuring the hardwareMarek Szyprowski
DMA hardware should respect buffer pitch, so use the width calculated from the buffer pitch instead of the virtual one. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: scaler: Fix support for YUV420, YUV422 and YUV444 modesMarek Szyprowski
Fix Cb/CR components order in two-planar YUV420, YUV422 and YUV444 modes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: scaler: Reset hardware before starting the operationAndrzej Pietrasiewicz
Ensure that Scaler hardware is properly reset and interrupts are cleared before processing next image. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: rotator: Fix DRM_MODE_REFLECT_{X,Y} interpretationMarek Szyprowski
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip were swapped in Rotator driver. Fix this by swapping code for interpreting them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29drm/exynos: ipp: Rework checking for the correct buffer formatsMarek Szyprowski
Prepare a common function for size and scale checks and call it for source and destination buffers. Then also move there the state-less checks from exynos_drm_ipp_task_setup_buffer, so the format information is already available in limits processing. Finally perform the IPP_LIMIT_BUFFER check on the real width of the buffer (the width calculated from the provided buffer pitch). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-06-29Merge branch 'pm-domains'Rafael J. Wysocki
Merge fixups for the recent extenstion of the generic power domains (genpd) framework covering performance states. * pm-domains: PM / Domains: Rename opp_node to np PM / Domains: Fix return value of of_genpd_opp_to_performance_state()
2018-06-29nl80211: check nla_parse_nested() return valuesJohannes Berg
At the very least we should check the return value if nla_parse_nested() is called with a non-NULL policy. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29nl80211: relax ht operation checks for meshBob Copeland
Commit 9757235f451c, "nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") relaxed the range for the HT operation field in meshconf, while also adding checks requiring the non-greenfield and non-ht-sta bits to be set in certain circumstances. The latter bit is actually reserved for mesh BSSes according to Table 9-168 in 802.11-2016, so in fact it should not be set. wpa_supplicant sets these bits because the mesh and AP code share the same implementation, but authsae does not. As a result, some meshconf updates from authsae which set only the NONHT_MIXED protection bits were being rejected. In order to avoid breaking userspace by changing the rules again, simply accept the values with or without the bits set, and mask off the reserved bit to match the spec. While in here, update the 802.11-2012 reference to 802.11-2016. Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Cc: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Bob Copeland <bobcopeland@fb.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29mac80211: disable BHs/preemption in ieee80211_tx_control_port()Denis Kenzior
On pre-emption enabled kernels the following print was being seen due to missing local_bh_disable/local_bh_enable calls. mac80211 assumes that pre-emption is disabled in the data path. BUG: using smp_processor_id() in preemptible [00000000] code: iwd/517 caller is __ieee80211_subif_start_xmit+0x144/0x210 [mac80211] [...] Call Trace: dump_stack+0x5c/0x80 check_preemption_disabled.cold.0+0x46/0x51 __ieee80211_subif_start_xmit+0x144/0x210 [mac80211] Fixes: 911806491425 ("mac80211: Add support for tx_control_port") Signed-off-by: Denis Kenzior <denkenz@gmail.com> [commit message rewrite, fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29i2c: gpio: initialize SCL to HIGH againWolfram Sang
It seems that during the conversion from gpio* to gpiod*, the initial state of SCL was wrongly switched to LOW. Fix it to be HIGH again. Fixes: 7bb75029ef34 ("i2c: gpio: Enforce open drain through gpiolib") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-29i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfersPeter Rosin
If DMA safe memory was allocated, but the subsequent I2C transfer fails the memory is leaked. Plug this leak. Fixes: 8a77821e74d6 ("i2c: smbus: use DMA safe buffers for emulated SMBus transactions") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-29i2c: algos: bit: mention our experience about initial statesWolfram Sang
So, if somebody wants to re-implement this in the future, we pinpoint to a problem case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-06-29Revert "i2c: algo-bit: init the bus to a known state"Wolfram Sang
This reverts commit 3e5f06bed72fe72166a6778f630241a893f67799. As per bugzilla #200045, this caused a regression. I don't really see a way to fix it without having the hardware. So, revert the patch and I will fix the issue I was seeing originally in the i2c-gpio driver itself. I couldn't find new users of this algorithm since, so there should be no one depending on the new behaviour. Reported-by: Sergey Larin <cerg2010cerg2010@mail.ru> Fixes: 3e5f06bed72f ("i2c: algo-bit: init the bus to a known state") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Sergey Larin <cerg2010cerg2010@mail.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
generated by cgit (git 2.34.1) at 2025-07-18 03:07:31 +0000