summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-11net: dsa: tag_8021q: add a context structureVladimir Oltean
While working on another tag_8021q driver implementation, some things became apparent: - It is not mandatory for a DSA driver to offload the tag_8021q VLANs by using the VLAN table per se. For example, it can add custom TCAM rules that simply encapsulate RX traffic, and redirect & decapsulate rules for TX traffic. For such a driver, it makes no sense to receive the tag_8021q configuration through the same callback as it receives the VLAN configuration from the bridge and the 8021q modules. - Currently, sja1105 (the only tag_8021q user) sets a priv->expect_dsa_8021q variable to distinguish between the bridge calling, and tag_8021q calling. That can be improved, to say the least. - The crosschip bridging operations are, in fact, stateful already. The list of crosschip_links must be kept by the caller and passed to the relevant tag_8021q functions. So it would be nice if the tag_8021q configuration was more self-contained. This patch attempts to do that. Create a struct dsa_8021q_context which encapsulates a struct dsa_switch, and has 2 function pointers for adding and deleting a VLAN. These will replace the previous channel to the driver, which was through the .port_vlan_add and .port_vlan_del callbacks of dsa_switch_ops. Also put the list of crosschip_links into this dsa_8021q_context. Drivers that don't support cross-chip bridging can simply omit to initialize this list, as long as they dont call any cross-chip function. The sja1105_vlan_add and sja1105_vlan_del functions are refactored into a smaller sja1105_vlan_add_one, which now has 2 entry points: - sja1105_vlan_add, from struct dsa_switch_ops - sja1105_dsa_8021q_vlan_add, from the tag_8021q ops But even this change is fairly trivial. It just reflects the fact that for sja1105, the VLANs from these 2 channels end up in the same hardware table. However that is not necessarily true in the general sense (and that's the reason for making this change). The rest of the patch is mostly plain refactoring of "ds" -> "ctx". The dsa_8021q_context structure needs to be propagated because adding a VLAN is now done through the ops function pointers inside of it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: dsa: tag_8021q: setup tagging via a single function callVladimir Oltean
There is no point in calling dsa_port_setup_8021q_tagging for each individual port. Additionally, it will become more difficult to do that when we'll have a context structure to tag_8021q (next patch). So refactor this now. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: dsa: tag_8021q: include missing refcount.hVladimir Oltean
The previous assumption was that the caller would already have this header file included. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11crypto/chcr: move nic TLS functionality to drivers/netRohit Maheshwari
This patch moves complete nic tls offload (kTLS) code from crypto directory to drivers/net/ethernet/chelsio/inline_crypto/ch_ktls directory. nic TLS is made a separate ULD of cxgb4. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge branch 'sfc-encap-offloads-on-EF10'David S. Miller
Edward Cree says: ==================== sfc: encap offloads on EF10 EF10 NICs from the 8000 series onwards support TX offloads (checksumming, TSO) on VXLAN- and NVGRE-encapsulated packets. This series adds driver support for these offloads. Changes from v1: * Fix 'no TXQ of type' error handling in patch #1 (and clear up the misleading comment that inspired the wrong version) * Add comment in patch #5 explaining what the deal with TSOv3 is ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: advertise encapsulated offloads on EF10Edward Cree
Necessitates an .ndo_features_check, as the EF10 datapath has several limitations on what it can handle. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: implement encapsulated TSO on EF10Edward Cree
>From the 8000 series onwards, EF10 NICs with suitable firmware are able to perform TSO within VXLAN or NVGRE encapsulation. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: de-indirect TSO handlingEdward Cree
Remove the tx_queue->handle_tso function pointer, and just use tx_queue->tso_version to decide which function to call, thus removing an indirect call from the fast path. Instead of passing a tso_v2 flag to efx_mcdi_tx_init(), set the desired tx_queue->tso_version before calling it. In efx_mcdi_tx_init(), report back failure to obtain a TSOv2 context by setting tx_queue->tso_version to 0, which will cause the TX path to use the GSO-based fallback. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: select inner-csum-offload TX queues for skbs that need itEdward Cree
Won't actually be exercised until we start advertising the corresponding offload features. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: create inner-csum queues on EF10 if supportedEdward Cree
If the MC reports the VXLAN_NVGRE datapath capability, then these queues can be used for checksum offload of encapsulated packets. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: define inner/outer csum offload TXQ typesEdward Cree
Nothing yet creates inner csum TXQs; just change all references to EFX_TXQ_TYPE_OFFLOAD to the new EFX_TXQ_TYPE_OUTER_CSUM. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: decouple TXQ type from labelEdward Cree
Make it possible to have an arbitrary mapping from types to labels, because when we add inner-csum-offload TXQs there will no longer be a convenient nesting hierarchy of NIC types (EF10 will have inner-csum TXQs, while Siena will have HIGHPRI). Correct a misleading comment on efx_hard_start_xmit(). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11octeontx2-af: Constify npc_kpu_profile_{action,cam}Rikard Falkeborn
These are never modified, so constify them to allow the compiler to place them in read-only memory. This moves about 25kB to read-only memory as seen by the output of the size command. Before: text data bss dec hex filename 296203 65464 1248 362915 589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko After: text data bss dec hex filename 321003 40664 1248 362915 589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge branch 'sfc-misc-cleanups'David S. Miller
Edward Cree says: ==================== sfc: misc cleanups Clean up a few nits I noticed while working on TXQ stuff. ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: cleanups around efx_alloc_channelEdward Cree
The old_channel argument is never used, so remove it. The function is only called from elsewhere in efx_channels.c, so make it static and remove the declaration from the header file. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: remove spurious unreachable return statementEdward Cree
The statement above it already returns, so there is no way to get here. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: remove duplicate call to efx_init_channels from EF100 probeEdward Cree
efx_init_struct already calls this, we don't need to do it again. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11bridge: mcast: Fix incomplete MDB dumpIdo Schimmel
Each MDB entry is encoded in a nested netlink attribute called 'MDBA_MDB_ENTRY'. In turn, this attribute contains another nested attributed called 'MDBA_MDB_ENTRY_INFO', which encodes a single port group entry within the MDB entry. The cited commit added the ability to restart a dump from a specific port group entry. However, on failure to add a port group entry to the dump the entire MDB entry (stored in 'nest2') is removed, resulting in missing port group entries. Fix this by finalizing the MDB entry with the partial list of already encoded port group entries. Fixes: 5205e919c9f0 ("net: bridge: mcast: add support for src list and filter mode dumping") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11ipv6: remove redundant assignment to variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Also re-order variable declarations in reverse Christmas tree ordering. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge branch 'ag71xx-add-ethtool-and-flow-control-support'David S. Miller
Oleksij Rempel says: ==================== ag71xx: add ethtool and flow control support The main target of this patches is to provide flow control support for ag71xx driver. To be able to validate this functionality, I also added ethtool support with HW counters. So, this patches was validated with iperf3 and counters showing Pause frames send or received by this NIC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ag71xx: add flow control supportOleksij Rempel
Add flow control support. The functionality was tested on AR9331 SoC and confirmed by iperf3 results and HW counters exported over ethtool. Following test configurations was used: iMX6S receiver <--- TL-SG1005D switch <---- AR9331 sender The switch is supporting symmytric flow control: Settings for eth0: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full --->> Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: on Port: MII PHYAD: 4 Transceiver: external Link detected: yes The iMX6S system was configured to 10Mbit, to let the switch use flow control: - ethtool -s eth0 speed 10 With flow control disabled on AR9331: - ethtool -A eth0 rx off tx off - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10 [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 66.2 MBytes 55.5 Mbits/sec 0.000 ms 0/47155 (0%) sender [ 5] 0.00-10.04 sec 11.5 MBytes 9.57 Mbits/sec 1.309 ms 38986/47146 (83%) receiver With flow control enabled on AR9331: - ethtool -A eth0 rx on tx on - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10 [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 15.1 MBytes 12.6 Mbits/sec 0.000 ms 0/10727 (0%) sender [ 5] 0.00-10.05 sec 11.5 MBytes 9.57 Mbits/sec 1.371 ms 2525/10689 (24%) receiver Similar results are get in opposite direction by introducing extra CPU load on AR9331: - chrt 40 dd if=/dev/zero of=/dev/null & Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ag71xx: add ethtool supportOleksij Rempel
Add basic ethtool support. The functionality was tested on AR9331 SoC. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11drivers/net/wan/x25_asy: Remove an unused flag "SLF_OUTWAIT"Xie He
The "SLF_OUTWAIT" flag defined in x25_asy.h is not actually used. It is only cleared at one place in x25_asy.c but is never read or set. So we can remove it. Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: stmmac: set get_rx_header_len() as void for it didn't have any error ↵Luo Jiaxing
code to return We found the following warning when using W=1 to build kernel: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3634:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] int ret, coe = priv->hw->rx_csum; When digging stmmac_get_rx_header_len(), dwmac4_get_rx_header_len() and dwxgmac2_get_rx_header_len() return 0 only, without any error code to report. Therefore, it's better to define get_rx_header_len() as void. Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge branch 'Add-GVE-Features'David S. Miller
David Awogbemila says: ==================== Add GVE Features. Note: Patch 4 in v3 was dropped. Patch 4 (patch 5 in v3): Start/stop timer only when report stats is enabled/disabled. Patch 7 (patch 8 in v3): Use netdev_info, not dev_info, to log device link status. ==================== Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Enable Link Speed Reporting in the driver.David Awogbemila
This change allows the driver to report the device link speed when the ethtool command: ethtool <nic name> is run. Getting the link speed is done via a new admin queue command: ReportLinkSpeed. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Use link status register to report link statusPatricio Noyola
This makes the driver better aware of the connectivity status of the device. Based on the device's status register, the driver can call netif_carrier_{on,off}. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Patricio Noyola <patricion@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Batch AQ commands for creating and destroying queues.Sagi Shahar
Adds support for batching AQ commands and uses it for creating and destroying queues. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Sagi Shahar <sagis@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: NIC stats for report-stats and for ethtoolDavid Awogbemila
This adds per queue NIC stats to ethtool stats and to report-stats. These stats are always exposed to guest whether or not the report-stats flag is turned on. Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.Kuo Zhao
This adds functionality to report driver stats to Hypervisor. (Users may want to turn this feature off as a matter of privacy so a "report-stats" flag is added as an ethtool priv option. It is also disabled by default.) The hypervisor would trigger a stats report in case "too many" packets dropped; the stats would be useful in debugging stuck queues. A "stats_report_trigger_cnt" stat is added to count the number of times the hypervisor attempts to trigger stats report. A timer is also added so that when report-stats is enabled, stat are updated once every 20 seconds. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Kuo Zhao <kuozhao@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Use dev_info/err instead of netif_info/err.Catherine Sullivan
Update the driver to use dev_info/err instead of netif_info/err. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Add stats for gve.Kuo Zhao
Sample output of "ethtool -S <interface-name>" with 1 RX queue and 1 TX queue: NIC statistics: rx_packets: 1039 tx_packets: 37 rx_bytes: 822071 tx_bytes: 4100 rx_dropped: 0 tx_dropped: 0 tx_timeouts: 0 rx_skb_alloc_fail: 0 rx_buf_alloc_fail: 0 rx_desc_err_dropped_pkt: 0 interface_up_cnt: 1 interface_down_cnt: 0 reset_cnt: 0 page_alloc_fail: 0 dma_mapping_error: 0 rx_posted_desc[0]: 1365 rx_completed_desc[0]: 341 rx_bytes[0]: 215094 rx_dropped_pkt[0]: 0 rx_copybreak_pkt[0]: 3 rx_copied_pkt[0]: 3 tx_posted_desc[0]: 6 tx_completed_desc[0]: 6 tx_bytes[0]: 420 tx_wake[0]: 0 tx_stop[0]: 0 tx_event_counter[0]: 6 adminq_prod_cnt: 34 adminq_cmd_fail: 0 adminq_timeouts: 0 adminq_describe_device_cnt: 1 adminq_cfg_device_resources_cnt: 1 adminq_register_page_list_cnt: 16 adminq_unregister_page_list_cnt: 0 adminq_create_tx_queue_cnt: 8 adminq_create_rx_queue_cnt: 8 adminq_destroy_tx_queue_cnt: 0 adminq_destroy_rx_queue_cnt: 0 adminq_dcfg_device_resources_cnt: 0 adminq_set_driver_parameter_cnt: 0 Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Kuo Zhao <kuozhao@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Get and set Rx copybreak via ethtoolKuo Zhao
This adds support for getting and setting the RX copybreak value via ethtool. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Kuo Zhao <kuozhao@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge tag 'wireless-drivers-next-2020-09-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 First set of patches for v5.10. Most noteworthy here is ath11k getting initial support for QCA6390 and IPQ6018 devices. But most of the patches are cleanup: W=1 warning fixes, fallthrough keywords, DMA API changes and tasklet API changes. Major changes: ath10k * support SDIO firmware codedumps * support station specific TID configurations ath11k * add support for IPQ6018 * add support for QCA6390 PCI devices ath9k * add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0 rekeying wcn36xx * add support for TX ack ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.10. Major changes: ath10k * support SDIO firmware codedumps * support station specific TID configurations ath11k * add support for IPQ6018
2020-09-11ath10k: Remove unused macro ATH10K_ROC_TIMEOUT_HZYueHaibing
There is no caller in tree, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200909135834.38448-1-yuehaibing@huawei.com
2020-09-11ath11k: Remove unused inline function htt_htt_stats_debug_dump()YueHaibing
There is no caller in tree, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200909134533.19604-1-yuehaibing@huawei.com
2020-09-11ath11k: fix link error when CONFIG_REMOTEPROC is disabledKalle Valo
If CONFIG_REMOTEPROC was disabled the linking failed with: ERROR: modpost: "rproc_get_by_phandle" [drivers/net/wireless/ath/ath11k/ath11k.ko] undefined! Compile tested only. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 1ff8ed786d5d ("ath11k: use remoteproc only with AHB devices") Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/0101017476e38f40-c4168ac4-c00a-4220-a032-fe17e4a157cb-000000@us-west-2.amazonses.com
2020-09-11ath11k: remove calling ath11k_init_hw_params() second timeAnilkumar Kolli
During probe ath11k_init_hw_params() is called from ath11k_core_pre_init() and is not needed agian in ath11k_core_init(). Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Fixes: 1ff8ed786d5d (ath11k: use remoteproc only with AHB devices) Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746d2a40d3-25cd7dbe-c0dd-4fdf-8735-366d7fb40207-000000@us-west-2.amazonses.com
2020-09-11ath11k: add raw mode and software crypto supportVenkateswara Naralasetty
Adding raw mode tx/rx support. Also, adding support for software crypto which depends on raw mode. To enable raw mode tx/rx: insmod ath11k.ko frame_mode=0 To enable software crypto: insmod ath11k.ko crypto_mode=1 These modes could be helpful in debugging crypto related issues. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746c6a52d9-18302a2c-0d6d-4057-aa4b-95960c809646-000000@us-west-2.amazonses.com
2020-09-11ath11k: add ipq6018 supportAnilkumar Kolli
IPQ6018 has one 5G and one 2G radio with 2x2, shares ipq8074 configurations. Tested on: IPQ6018 hw1.0 AHB WLAN.HK.2.2-02134-QCAHKSWPL_SILICONZ-1 Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746cb68b63-c2bc31ec-a31e-442e-a572-26f4c045c06b-000000@us-west-2.amazonses.com
2020-09-11ath11k: move target ce configs to hw_paramsAnilkumar Kolli
Move target CE config and target CE service config to hw_params. No functional changes. Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746cb685d9-6bedeccb-29a1-4d32-8664-fcfe7d105f4a-000000@us-west-2.amazonses.com
2020-09-11dt: bindings: net: update compatible for ath11kAnilkumar Kolli
Add IPQ6018 wireless driver support, its based on ath11k driver. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746cb6751a-ca300933-1174-4534-a01b-b1dbf1c1f305-000000@us-west-2.amazonses.com
2020-09-10net: smc91x: Remove set but not used variable 'status' in smc_phy_configure()Luo Jiaxing
Fixes the following warning when using W=1 to build kernel: drivers/net/ethernet/smsc/smc91x.c: In function ‘smc_phy_configure’: drivers/net/ethernet/smsc/smc91x.c:1039:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] int status; Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10Merge branch 'smc-next'David S. Miller
Karsten Graul says: ==================== net/smc: updates 2020-09-10 Please apply the following patch series for smc to netdev's net-next tree. This patch series is a mix of various improvements and cleanups. The patches 1 and 10 improve the handling of large parallel workloads. Patch 8 corrects a kernel config default for config CCWGROUP on s390. Patch 9 allows userspace tools to retrieve socket information for more sockets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net/smc: use separate work queues for different worker typesKarsten Graul
There are 6 types of workers which exist per smc connection. 3 of them are used for listen and handshake processing, another 2 are used for close and abort processing and 1 is the tx worker that moves calls to sleeping functions into a worker. To prevent flooding of the system work queue when many connections are opened or closed at the same time (some pattern uperf implements), move those workers to one of 3 smc-specific work queues. Two work queues are module-global and used for handshake and close workers. The third work queue is defined per link group and used by the tx workers that may sleep waiting for resources of this link group. And in smc_llc_enqueue() queue the llc_event_work work to the system prio work queue because its critical that this work is started fast. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net/smc: use the retry mechanism for netlink messagesGuvenc Gulce
When the netlink messages to be sent to the userspace are too big for a single netlink message, send them in chunks using the netlink_dump infrastructure. Modify the smc diag dump code so that it can signal to the netlink_dump infrastructure that it needs to send more data. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10s390/net: add SMC config as one of the defaults of CCWGROUPGuvenc Gulce
arch/s390/net/pnet.c uses ccwgroup function dev_is_ccwgroup() in pnetid_by_dev_port(). For s390 the net/smc code makes use of function pnetid_by_dev_port(). Make sure ccwgroup is built into the kernel, if smc is to be built into the kernel. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net/smc: immediate freeing in smc_lgr_cleanup_early()Ursula Braun
smc_lgr_cleanup_early() schedules the free worker with delay. DMB unregistering occurs in this delayed worker increasing the risk to reach the SMCD SBA limit without need. Terminate the linkgroup immediately, since termination means early DMB unregistering. For SMCD the global smc_server_lgr_pending lock is given up early. A linkgroup to be given up with smc_lgr_cleanup_early() may already contain more than one connection. Using __smc_lgr_terminate() in smc_lgr_cleanup_early() covers this. And consolidate smc_ism_put_vlan() and smc_put_device() into smc_lgr_free() only. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net/smc: reduce smc_listen_decline() callsUrsula Braun
smc_listen_work() contains already an smc_listen_decline() exit. Use this exit for smc_listen_rdma_finish() problems as well. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-15 23:51:50 +0000