| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
When an eDP with high clock states is going into s0i3, stream_count is
0. This causes DML to not update the clks to the lowest state and
blocking us to enter s0i3 since eDP is out of vmin.
[How]
When stream_count is 0, set all the clocks to the lowest state.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A wavefront may deallocate its VGPRs at the end of a program while
waiting for memory transactions to complete. If it subsequently
receives a context save exception it will be unable to save,
since this requires VGPRs. In this case the trap handler should
terminate the wavefront.
Fixes intermittent VM faults under context switching load.
V2: Use S_ENDPGM instead of S_ENDPGM_SAVED for performance counters
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Page table definition increased up to 2MB.
[How]
Define new use case of page table for VA.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently there's an issue on DCN401 that prevents oled eDP panels from
being lit up that is still under investigation. To unblock dev work
while investigating, we can work around the issue by skipping toggling
the enablement of the backlight.
[How]
- new debug bit that will skip touching backlight enable DPCD for oled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Add parameters for set_abm_event to enable varibright scaling.
VariBright Scaling is a feature to refer to system states like
1. Power mode
2. Battery Life percent
3. FullScreen video
4. Backlight slider
to adjust variBright strength to get low power or user experience.
[How]
Add parameters of set_abm_event for VB Scaling
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chun-LiangChang <chuchang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The values calculated in optc1_get_otg_active_size are assigned to the
wrong output parameters, vertical blank is being used for horizontal size
and vice versa. This results in DPG test pattern looking wrong during
hardware init, as the DPG dimensions get assigned from this output, and
potentially other issues.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
When updating clocks via SMU, DAL needs to wait for requests to be fulfilled
before proceeding.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
In order to support glitchless display clock ramping for virtual stream,
we must
turn on symclk for stream encoder. The code will power on phy and enable
symclk
for dio encoder during virtual stream dpms sequence.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Vbios & Driver have difference pixel rate div policy.
When enabling fast boot & performing blank & unblank w/o timing setting,
pixel clock & pixel rate dividor are not match.
It would cause too high pixel reate and eDP would be black screen.
[How]
We would keep pixel rate div setting by Vbios until next timing setting.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: yi-lchen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 6670142d25f3cc3166f2a6c8454acd310bf2776a.
Pierre-Eric reported problems with this on his navi33. Revert
for now until we understand what is going wrong.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Pierre-eric.Pelloux-prayer@amd.com
|
|
Add some additional registers.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
define new gfx12 uapi flags
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The varible uncached set false, the condition uncached cannot be true.
So remove the dead code, mapping flags will set the flag AMDGPU_VM_MTYPE_UC in else.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch changes the implementation of AMDGPU_PTE_MTYPE_NV10,
clear the bits before setting the new one.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch to disable lane0 L1TLB and enable lane1 L1TLB.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch to configure mmhub3.3 SAW registers
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Flexible arrays used [1] instead of []. Replace the former with the latter
to resolve multiple UBSAN warnings observed on boot with a BONAIRE card.
In addition, use the __counted_by attribute where possible to hint the
length of the arrays to the compiler and any sanitizers.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are a few spelling mistakes in dml2_printf messages. Fix them.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix comments and error messages to rightly represent
the information.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename the variable ip_dump_cp_queues to ip_dump_compute_queue
as it represent compute queues.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gfx9 support of CP queue registers for all queues
to be used by devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of gfx9 ipdump print so devcoredump
could trigger it to dump the captured registers
in devcoredump.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add general registers of gfx9 in ipdump for
devcoredump support.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit fixes a type mismatch in the amdgpu_gfx_kiq_init_ring
function triggered by the snprintf function expecting unsigned char
arguments due to the '%hhu' format specifier, but receiving int and u32
arguments.
The issue occurred because the arguments xcc_id, ring->me, ring->pipe,
and ring->queue were of type int and u32, not unsigned char. This led to
a type mismatch when these arguments were passed to snprintf.
To resolve this, the snprintf line was modified to cast these arguments
to unsigned char. This ensures that the arguments are of the correct
type for the '%hhu' format specifier and resolves the warning.
Fixes the below:
>> drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:333:4: warning: format
>> specifies type 'unsigned char' but the argument has type 'int'
>> [-Wformat]
xcc_id, ring->me, ring->pipe, ring->queue);
^~~~~~
>> drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:333:12: warning: format
>> specifies type 'unsigned char' but the argument has type 'u32' (aka
>> 'unsigned int') [-Wformat]
xcc_id, ring->me, ring->pipe, ring->queue);
^~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:333:22: warning: format specifies type 'unsigned char' but the argument has type 'u32' (aka 'unsigned int') [-Wformat]
xcc_id, ring->me, ring->pipe, ring->queue);
^~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:333:34: warning: format specifies type 'unsigned char' but the argument has type 'u32' (aka 'unsigned int') [-Wformat]
xcc_id, ring->me, ring->pipe, ring->queue);
^~~~~~~~~~~
4 warnings generated.
Fixes: 0ea554455542 ("drm/amdgpu: Fix snprintf usage in amdgpu_gfx_kiq_init_ring")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405250446.XeaWe66u-lkp@intel.com/
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Potentially overflowing expression mall_size_per_umc * adev->gmc.num_umc with type unsigned int (32 bits, unsigned)
is evaluated using 32-bit arithmetic,and then used in a context that expects an expression of type u64 (64 bits, unsigned).
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
AMDGPU_RAS_GPU_ERR_BOOT_STATUS field is no longer valid.
The polling sequence is also simplifed according to
the latest firmware change.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
states member of 'struct _StateArray' triggers this restriction,
resulting in:
drivers/gpu/drm/radeon/pptable.h:442:5: error: 'counted_by' should not be applied to an array with element of unknown size because 'ATOM_PPLIB_STATE_V2' (aka 'struct _ATOM_PPLIB_STATE_V2') is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
442 | ATOM_PPLIB_STATE_V2 states[] __counted_by(ucNumEntries);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2028
Fixes: efade6fe50e7 ("drm/radeon: silence UBSAN warning (v3)")
Signed-off-by: Bill Wendling <morbo@google.com>
Co-developed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes HDP flushes on systems with non-4K pages.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
categories
Currently when one enables driver debugging dmesg gets spammed, at I
suspect vblank rate, with messages like:
[drm:amdgpu_dm_atomic_check [amdgpu]] MPO enablement requested on crtc:[00000000f073c3bb]
Fix if by converting some logging from deprecated and incorrect
DRM_DEBUG_DRIVER to drm_dbg_atomic. Plus some localized drive-by changes
to drm_dbg_kms.
By no means an exhaustive conversion but at least it allows turning on
driver debug selectively.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add estimate of how much vram we need to reserve for RAS
when caculating the total available vram.
v2: apply the change to MP0 v13_0_2 and v13_0_14
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
And also make sure the value of msg[1].len should be in the range of u16.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix LDS size interpretation: 512 bytes (>= gfx12) vs 256 (< gfx12).
Ensure STATE_PRIV.BARRIER_COMPLETE cannot change after reading or
before writing. Other waves in the threadgroup may cause this field
to assert if they complete the barrier.
Do not overwrite EXCP_FLAG_PRIV.{SAVE_CONTEXT,HOST_TRAP} when
restoring this register. Both of these fields can assert while the
wavefront is running the trap handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We have messages when the VCN fails to initialize and
there is no need to report on success.
Also PSP loading FWs is the default for production.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sonny Jiang <sonjiang@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch changes the implementation of AMDGPU_PTE_MTYPE_GFX12,
clear the bits before setting the new one.
This fixed the potential issue that GFX12 setting memory to NC.
v2: Clear mtype field before setting the new one (Alex)
v3: Fix typo (Felix)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The scaler_data structure is implicitly copied onto the stack twice by
being returned from a function. This is usually a bad idea, but it
was not flagged by the compiler until a recent addition that pushed
it over the 1024 byte function stack limit:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_translation_helper.c: In function 'populate_dml_plane_cfg_from_plane_state':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_translation_helper.c:1075:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Use an explicit kzalloc() and memcpy() instead here to keep it off the
stack.
Fixes: 00c391102abc ("drm/amd/display: Add misc DC changes for DCN401")
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Putting excessively large objects on a function stack causes
a warning about possibly overflowing the 8KiB of kernel stack:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c: In function 'dcn401_update_bw_bounding_box':
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1599:1: error: the frame size of 1196 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
1599 | }
| ^
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c: In function 'dc_state_create':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:221:1: error: the frame size of 1196 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
221 | }
| ^
Use dynamic allocation instead.
Fixes: e779f4587f61 ("drm/amd/display: Add handling for DC power mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The graphics_object_id structure is meant to fit into 32 bits, as it's
passed by value in and out of functions. A recent change increased
the size to 128 bits, so it's now always passed by reference, which
is clearly not intended and ends up producing a compile-time warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c: In function 'construct_phy':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:743:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Add back the bitfields to revert to the original size, while keeping
the 'enum' type change.
Fixes: fec85f995a4b ("drm/amd/display: Fix compiler redefinition warnings for certain configs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This structure is too large to fit on a stack, as shown by the
newly introduced warnings from a recent code change:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c: In function 'dcn32_update_bw_bounding_box':
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2019:1: error: the frame size of 1180 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn321/dcn321_resource.c: In function 'dcn321_update_bw_bounding_box':
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn321/dcn321_resource.c:1597:1: error: the frame size of 1180 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c: In function 'dc_state_create':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:219:1: error: the frame size of 1184 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Instead of open-coding the assignment of a large structure to a stack
variable, use an explicit kmemdup() in each case to move it off the stack.
Fixes: e779f4587f61 ("drm/amd/display: Add handling for DC power mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes a warning from checkpatch by ensuring the trailing */ is
aligned with the rest of the *, improving readability.
Co-developed-by: Lucas Antonio <lucasantonio.santos@usp.br>
Signed-off-by: Lucas Antonio <lucasantonio.santos@usp.br>
Signed-off-by: Bruno Rocha Levi <brunolevilevi@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Newer assemblers reject S_WAITCNT. All instances of S_WAITCNT can be
replaced by S_WAITCNT 0 (< gfx12) or S_WAIT_IDLE (>= gfx12) since
there is no concurrency of different memory instruction classes.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Source and binary have become mismatched during branch activity.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for
some SMU 13.0.4/13.0.11 users") attempted to fix shutdown issues
that were reported since commit 31729e8c21ec ("drm/amd/pm: fixes a
random hang in S4 for SMU v13.0.4/11") but caused issues for some
people.
Adjust the workaround flow to properly only apply in the S4 case:
-> For shutdown go through SMU_MSG_PrepareMp1ForUnload
-> For S4 go through SMU_MSG_GfxDeviceDriverReset and
SMU_MSG_PrepareMp1ForUnload
Reported-and-tested-by: lectrode <electrodexsnet@gmail.com>
Closes: https://github.com/void-linux/void-packages/issues/50417
Cc: stable@vger.kernel.org
Fixes: cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users")
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable gfx pipe1 hardware support.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On GFXIP9.4.3, make CPX mode as the default compute mode if the node is
setup in NPS4 memory partition mode. This change is only applicable for
dGPU, for APU, continue to use TPX mode.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set up pipe1 as a high priority queue.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use correct ref/mask for differnent gfx ring pipe. Ported from
ZhenGuo's patch for gfx10.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
flush_gpu_tlb may be called from another thread while
device_gpu_recover is running.
Both of these threads access registers through the VF
RLCG interface during VF Full Access. Add a lock around this interface
to prevent race conditions between these threads.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With commit 89773b85599a
("drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs")
big and small APU "VRAM" handling in KFD was unified. Since AMD_IS_APU
is set for both big and small APUs, we can simplify the checks in
the code.
v2: clean up a few more places (Lang)
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 28ebbb4981cb1fad12e0b1227dbecc88810b1ee8.
Revert this commit as apparently the LLVM code to take advantage of
this never landed.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Feifei Xu <feifei.xu@amd.com>
|
|
Allocate some memory, send the address in chunks to dmub, and finally
ask it to copy the bounding box data into the newly allocated memory.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
