summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-21rsi: use enum for FSM statesAmitkumar Karwar
Currently macros are used for FSM states. We will replace it with enum so that new state can be added easily without worrying about macro value. Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rsi: add usb RS9113 chipset supportPrameela Rani Garnepudi
usb device id and vendor id for RS9113 chipset are included. So it can be used through usb interface. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21mwifiex: debugfs: remove redunant check of mwifiex_dfs_dirShawn Lin
debugfs_remove already check mwifiex_dfs_dir, so remove it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21mwifiex: fixes the unexpected be printed log by defaultCaesar Wang
This patch uses WARN level is not printed by default. In some cases, some boards have always met the unused log be printed as follows. ... [23193.523182] mwifiex_pcie 0000:01:00.0: mwifiex_get_cfp: cannot find cfp by band 2 & channel=13 freq=0 [23378.633684] mwifiex_pcie 0000:01:00.0: mwifiex_get_cfp: cannot find cfp by band 2 & channel=13 freq=0 Due to we used the wifi default area was US and didn't support 12~14 channels. As Frequencies: * 2412 MHz [1] (30.0 dBm) * 2417 MHz [2] (30.0 dBm) * 2422 MHz [3] (30.0 dBm) * 2427 MHz [4] (30.0 dBm) * 2432 MHz [5] (30.0 dBm) * 2437 MHz [6] (30.0 dBm) * 2442 MHz [7] (30.0 dBm) * 2447 MHz [8] (30.0 dBm) * 2452 MHz [9] (30.0 dBm) * 2457 MHz [10] (30.0 dBm) * 2462 MHz [11] (30.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Also, as the commit 1b499cb72f26b ("mwifiex: disable channel filtering feature in firmware"), it proved to be a feature to get better scan result from overlapping channel. Even there could be AP from overlapping channel (might be 12/13/14 in this case), it will be filtered depend on reg domain rules. e.g: ... if (ch->flags & IEEE80211_CHAN_DISABLED) continue; So it should not been an ERROR, use the WARN level to instead it for now. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Acked-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: fix REG_USTIME_TSF register definitionKevin Lo
The REG_USTIME_TSF (US Time Tuning for TSF) definition of Realtek chips should be 0x55C. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21Merge branch 'ipmr-ip6mr-add-Netlink-notifications-on-cache-reports'David S. Miller
Julien Gomes says: ==================== ipmr/ip6mr: add Netlink notifications on cache reports Currently, all ipmr/ip6mr cache reports are sent through the mroute/mroute6 socket only. This forces the use of a single socket for mroute programming, cache reports and, regarding ipmr, IGMP messages without Router Alert option reception. The present patches are aiming to send Netlink notifications in addition to the existing igmpmsg/mrt6msg to give user programs a way to handle cache reports in parallel with multiple sockets other than the mroute/mroute6 socket. Changes in v2: - Changed attributes naming from {IPMRA,IP6MRA}_CACHEREPORTA_* to {IPMRA,IP6MRA}_CREPORT_* - Improved packet data copy to handle non-linear packets in ipmr/ip6mr cache report Netlink notification creation - Added two rtnetlink groups with restricted-binding - Changed cache report notified groups from RTNL_{IPV4,IPV6}_MROUTE to the new restricted groups in ipmr/ip6mr Changes in v3: - Put message size calculation for {igmp,mrt6}msg_netlink_event in separate functions - Increased vif id attributes size from u8 to u32 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21ip6mr: add netlink notifications on mrt6msg cache reportsJulien Gomes
Add Netlink notifications on cache reports in ip6mr, in addition to the existing mrt6msg sent to mroute6_sk. Send RTM_NEWCACHEREPORT notifications to RTNLGRP_IPV6_MROUTE_R. MSGTYPE, MIF_ID, SRC_ADDR and DST_ADDR Netlink attributes contain the same data as their equivalent fields in the mrt6msg header. PKT attribute is the packet sent to mroute6_sk, without the added mrt6msg header. Suggested-by: Ryan Halbrook <halbrook@arista.com> Signed-off-by: Julien Gomes <julien@arista.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21ipmr: add netlink notifications on igmpmsg cache reportsJulien Gomes
Add Netlink notifications on cache reports in ipmr, in addition to the existing igmpmsg sent to mroute_sk. Send RTM_NEWCACHEREPORT notifications to RTNLGRP_IPV4_MROUTE_R. MSGTYPE, VIF_ID, SRC_ADDR and DST_ADDR Netlink attributes contain the same data as their equivalent fields in the igmpmsg header. PKT attribute is the packet sent to mroute_sk, without the added igmpmsg header. Suggested-by: Ryan Halbrook <halbrook@arista.com> Signed-off-by: Julien Gomes <julien@arista.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21rtnetlink: add restricted rtnl groups for ipv4 and ipv6 mrouteJulien Gomes
Add RTNLGRP_{IPV4,IPV6}_MROUTE_R as two new restricted groups for the NETLINK_ROUTE family. Binding to these groups specifically requires CAP_NET_ADMIN to allow multicast of sensitive messages (e.g. mroute cache reports). Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Julien Gomes <julien@arista.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21rtnetlink: add NEWCACHEREPORT message typeJulien Gomes
New NEWCACHEREPORT message type to be used for cache reports sent via Netlink, effectively allowing splitting cache report reception from mroute programming. Suggested-by: Ryan Halbrook <halbrook@arista.com> Signed-off-by: Julien Gomes <julien@arista.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21brcmfmac: Use separate firmware for revision 0 of the brcm43430 chipHans de Goede
The brcm43430 chip needs different firmware files for chip revision 0 and 1. The file currently in linux-firmware is for revision 1 only. This commit makes brcmfmac request brcmfmac43430a0-sdio.bin instead of brcmfmac43430-sdio.bin for revision 0 chips. Note that the behavior for revision 1 chips is not changed, ideally those would load brcmfmac43430a1-sdio.bin, but that will break existing setups. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21tcp: md5: hide unused variableArnd Bergmann
Changing from a memcpy to per-member comparison left the size variable unused: net/ipv4/tcp_ipv4.c: In function 'tcp_md5_do_lookup': net/ipv4/tcp_ipv4.c:910:15: error: unused variable 'size' [-Werror=unused-variable] This does not show up when CONFIG_IPV6 is enabled, but the variable can be removed either way, along with the now unused assignment. Fixes: 6797318e623d ("tcp: md5: add an address prefix for key lookup") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21idsn: fix wrong skb_put() usedyuan linyu
in my commit b952f4dff2751252db073c27c0f8a16a416a2ddc, - *(u8 *)skb_put(skb_out, 1) = (u8)(accm >> 24); \ + skb_put(skb_out, (u8)(accm >> 24)); \ it should skb_put_u8() Fixes: b952f4dff275 ("net: manual clean code which call skb_put_[data:zero])") Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21wil6210: remove ioctl interfaceMaya Erez
Wireless drivers should not be using ioctl interface, hence remove this interface for wil6210 driver. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21wil6210: add support for PCIe D3hot in system suspendMaya Erez
In order to preserve the connection in suspend/resume flow, wil6210 host allows going to PCIe D3hot state in suspend, instead of performing a full wil6210 device reset. This requires the platform ability to initiate wakeup in case of RX data. To check that, a new platform API is added. In addition, add cfg80211 suspend/resume callbacks implementation. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21wil6210: prevent platform callbacks after uninitDedy Lansky
After calling platform_ops.uninit() it is still possible to invoke platform callbacks. To prevent this, zero platform_ops right after invoking uninit. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21ath10k: set rxnss_override for QCA9888Sven Eckelmann
QCA9888 supports VHT80 with 2x2. But it only support 1x1 with VHT160 or VHT80+80. Inform userspace and the the QCA firmware about that limitation whenever VHT80+80 or VHT160 is configured. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [kvalo@qca.qualcomm.com: use hw_params] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21ath10k: configure rxnss_override for QCA9984Ben Greear
QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz. First, report this to user-space by setting the max-tx-speed and max-rx-speed vht capabilities. Second, if the peer rx-speed is configured, and if we are in 160 or 80+80 mode, and the peer rx-speed matches the max speed for 2x2 or 1x1 at 160Mhz (long guard interval), then use that info to set the peer_bw_rxnss_override appropriately. Without this, a 9984 firmware will not use 2x2 ratesets when transmitting to peer (it will be stuck at 1x1), because the firmware would not have configured the rxnss_override. Signed-off-by: Ben Greear <greearb@candelatech.com> [sven.eckelmann@openmesh.com: rebase, cleanup, drop 160Mhz workaround cleanup] Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [kvalo@qca.qualcomm.com: use hw_params, rename the title] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21ath10k: use complete VHT chan width for 160MHz workaroundBen Greear
The ath10k firmware doesn't announce its VHT channel width capabilities in the vht_cap information from the "service ready event" arguments. The driver must therefore check whether the 160MHz short GI bit is set and whether the driver still doesn't set the bits for the 160/80+80 MHz capabilities. The two bits for the channel width are a two bit integer and not two separate bits which cannot be parsed without the knowledge of the other bit. Using IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ (b10..) as a mask for this task doesn't make any sense. The correct mask for the VHT channel width should be used instead to make this check more readable. Signed-off-by: Ben Greear <greearb@candelatech.com> [sven.eckelmann@openmesh.com: separate 160Mhz workaround cleanup, add commit message] Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-20i40e: don't hold RTNL lock for the entire resetJacob Keller
We recently refactored i40e_do_reset() and its friends to be able to hold the RTNL lock only for the portions that actually need to be protected. However, a separate refactoring added several new callers of these functions during the PCIe error recovery and suspend/resume cycles. When merging the changes together, it was not noticed that we could reduce the RTNL scope by letting the reset function handle the lock itself, as previously it was not possible. Fix this by replacing these call sites to indicate that the reset function should handle its own lock. This enables multiple PFs to reset or resume simultaneously without serializing the resets via the RTNL lock. The end result is that on systems with lots of PFs and VFs the resets don't stall waiting for each other to finish. It is probable that we can also do the same for i40e_do_reset_safe, but this author did not research that change carefully enough to be confident. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: Handle PE_CRITERR properly with IWARP enabledCatherine Sullivan
When IWARP is enabled, we weren't clearing the PE_CRITERR, just logging it and removing it from the mask. We need to do a corer to reset the PE_CRITERR register, so set the bit for that as we handle the interrupt. We should also be checking for the error against the PFINT_ICR0 register, and only need to clear it in the value getting written to PFINT_ICR0_ENA. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: clear only cause_ena bitShannon Nelson
When disabling interrupts, we should only be clearing the CAUSE_ENA bit, not clearing the whole register. Clearing the whole register sets the NEXTQ_IDX field to 0 instead of 0x7ff which can confuse the Firmware in some reset sequences. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: fix disabling overflow promiscuous modeAlan Brady
There exists a bug in which the driver does not correctly exit overflow promiscuous mode. This can occur if "too many" mac filters are added, putting the driver into overflow promiscuous mode, and the filters are then removed. When the failed filters are removed, the driver reports exiting overflow promiscuous mode which is correct, however traffic continues to be received as if in promiscuous mode still. The bug occurs because the conditional for toggling promiscuous mode was set to only execute when promiscuous mode was enabled and not when it was disabled as well. This patch fixes the conditional to correctly execute when promiscuous mode is toggled and not just enabled. Without this patch, the driver is unable to correctly exit overflow promiscuous mode. Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: Add support for OEM firmware versionFilip Sadowski
This patch adds support for OEM firmware version. If OEM specific adapter is detected ethtool reports OEM product version in firmware version string instead of etrack id. Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: genericize the partition bandwidth controlShannon Nelson
Partition bandwidth control is not in just one form of MFP (multi-function partitioning), so make the code more generic and be sure to nudge the Tx scheduler for all MFP. Copyright updated to 2017. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: Add message for unsupported MFP modeCarolyn Wyborny
This patch adds a check and message if the device is in MFP mode as changing RSS input set is not supported in MFP mode. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: Support firmware CEE DCB UP to TC map re-definitionGreg Bowers
Changes parsing of FW 4.33 AQ command Get CEE DCBX OPER CFG (0x0A07). Change is required because FW now creates the oper_prio_tc nibbles reversed from those in the CEE Priority Group sub-TLV. This change will only apply to FW 4.33 as future FW versions will use a different function to parse the CEE data. Signed-off-by: Greg Bowers <gregory.j.bowers@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: Fix potential out of bound array accessSudheer Mogilappagari
This is a fix for the static code analysis issue where dcbcfg->numapps could be greater than size of array (i.e dcbcfg->app[I40E_DCBX_MAX_APPS]). The fix makes sure that the array is not accessed past the size of of the array (i.e. I40E_DCBX_MAX_APPS). Copyright updated to 2017. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: comment that udp_port must be in host byte orderJacob Keller
The firmware expects the port number passed when setting up the UDP tunnel configuration to be in Little Endian format. The i40e_aq_add_udp_tunnel command byte swaps the value from host order to Little Endian. Since commit fe0b0cd97b4f ("i40e: send correct port number to AdminQ when enabling UDP tunnels") we've correctly sent the value in host order. Let's also add a comment to the function explaining that it must be in host order, as the port numbers are commonly stored as Big Endian values. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: use dev_dbg instead of dev_info when warning about missing routineJacob Keller
When searching for the vf_capability client routine, dev_info() was used, instead of the normal dev_dbg(). This causes the message to be displayed at standard log levels which can cause administrators to worry. Avoid this by using dev_dbg instead. Copyright updated to 2017. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e/i40evf: update WOL and I40E_AQC_ADDR_VALID_MASK flagsAlice Michael
Update a few flags related to FW interactions. Copyright updated to 2017. Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40evf: assign num_active_queues inside i40evf_alloc_queuesJacob Keller
The variable num_active_queues represents the number of active queues we have for the device. We assign this pretty early in i40evf_init_subtask. Several code locations are written with loops over the tx_rings and rx_rings structures, which don't get allocated until i40evf_alloc_queues, and which get freed by i40evf_free_queues. These call sites were written under the assumption that tx_rings and rx_rings would always be allocated at least when num_active_queues is non-zero. Lets fix this by moving the assignment into the function where we allocate queues. We'll use a temporary variable for storage so that we don't assign the value in the adapter structure until after the rings have been set up. Finally, when we free the queues, we'll clear the value to ensure that we do not loop over the rings memory that no longer exists. This resolves a possible NULL pointer dereference in i40evf_get_ethtool_stats which could occur if the VF fails to recover from a reset, and then a user requests statistics. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: add support for XDP_TX actionBjörn Töpel
This patch adds proper XDP_TX action support. For each Tx ring, an additional XDP Tx ring is allocated and setup. This version does the DMA mapping in the fast-path, which will penalize performance for IOMMU enabled systems. Further, debugfs support is not wired up for the XDP Tx rings. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e: add XDP support for pass and drop actionsBjörn Töpel
This commit adds basic XDP support for i40e derived NICs. All XDP actions will end up in XDP_DROP. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20igmp: add a missing spin_lock_init()WANG Cong
Andrey reported a lockdep warning on non-initialized spinlock: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 4099 Comm: a.out Not tainted 4.12.0-rc6+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x717/0x1aa0 kernel/locking/lockdep.c:755 ? 0xffffffffa0000000 __lock_acquire+0x269/0x3690 kernel/locking/lockdep.c:3255 lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855 __raw_spin_lock_bh ./include/linux/spinlock_api_smp.h:135 _raw_spin_lock_bh+0x36/0x50 kernel/locking/spinlock.c:175 spin_lock_bh ./include/linux/spinlock.h:304 ip_mc_clear_src+0x27/0x1e0 net/ipv4/igmp.c:2076 igmpv3_clear_delrec+0xee/0x4f0 net/ipv4/igmp.c:1194 ip_mc_destroy_dev+0x4e/0x190 net/ipv4/igmp.c:1736 We miss a spin_lock_init() in igmpv3_add_delrec(), probably because previously we never use it on this code path. Since we already unlink it from the global mc_tomb list, it is probably safe not to acquire this spinlock here. It does not harm to have it although, to avoid conditional locking. Fixes: c38b7d327aaf ("igmp: acquire pmc lock for ip_mc_clear_src()") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20Merge tag 'mlx5-updates-2017-06-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2017-06-20 (mlx5 IPoIB updates) This series includes updates to mlx5 IPoIB netdevice driver (mlx5i), 1. We move ipoib files into separate directory, to allow it to grow separately in its own space 2. Remove HW update carrier logic from IPoIB and VF representors profiles. 3. Add basic ethtool support. (Rings options/statistics and driver info). 4. Change MTU support. 5. Xmit path statistics reporting. 6. add PTP support. For the new ethtool ops, PTP (ioctl) and change_mtu ndos in IPoIB, we didn't add new implementation or new logic, we only reused those callbacks from the already existing mlx5e (ethernet netdevice profile) and exposed them in IPoIB netdevice/ethtool ops. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20Merge branch 's390-net-updates-part-2'David S. Miller
Julian Wiedmann says: ==================== s390/net updates, part 2 (v2) thanks for the feedback. Here's an updated patchset that honours the reverse christmas tree and drops the __packed attribute. Please apply. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20s390/qeth: use diag26c to get MAC address on L2Julian Wiedmann
When a s390 guest runs on a z/VM host that's part of a SSI cluster, it can be migrated to a different host. In this case, the MAC address it originally obtained on the old host may be re-assigned to a new guest. This would result in address conflicts between the two guests. When running as z/VM guest, use the diag26c MAC Service to obtain a hypervisor-managed MAC address. The MAC Service is SSI-aware, and won't re-assign the address after the guest is migrated to a new host. This patch adds support for the z/VM MAC Service on L2 devices. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20s390/diag: add diag26c supportJulian Wiedmann
Implement support for the hypervisor diagnose 0x26c ('Access Certain System Information'). It passes a request buffer and a subfunction code, and receives a response buffer and a return code. Also add the scaffolding for the 'MAC Services' subfunction. It may be used by network devices to obtain a hypervisor-managed MAC address. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20s390/qeth: fix packing buffer statisticsJulian Wiedmann
There's two spots in qeth_send_packet() where we don't accurately account for transmitted packing buffers in qeth's performance statistics: 1) when flushing the current buffer due to insufficient size, and the next buffer is not EMPTY, we need to account for that flushed buffer. 2) when synchronizing with the TX completion code, we reset flush_count and thus forget to account for any previously flushed buffers. Reported-by: Nils Hoppmann <niho@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20s390/qeth: add ipa return codes for bridgeportKittipon Meesompop
add ipa return codes for Bridgeport (HiperSockets and OSA) according to system level design. Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20Merge tag 'wireless-drivers-for-davem-2017-06-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.12 Two important fixes for brcmfmac. The rest of the brcmfmac patches are either code preparation and fixing a new build warning. brcmfmac * fix a NULL pointer dereference during resume * fix a NULL pointer dereference with USB devices, a regression from v4.12-rc1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20net: stmmac: free an skb first when there are no longer any descriptors using itNiklas Cassel
When having the skb pointer in the first descriptor, stmmac_tx_clean can get called at a moment where the IP has only cleared the own bit of the first descriptor, thus freeing the skb, even though there can be several descriptors whose buffers point into the same skb. By simply moving the skb pointer from the first descriptor to the last descriptor, a skb will get freed only when the IP has cleared the own bit of all the descriptors that are using that skb. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20sfc: remove duplicate up_write on VF filter_semEdward Cree
Somehow two copies of the line 'up_write(&vf->efx->filter_sem);' got into efx_ef10_sriov_set_vf_vlan(). This would put the mutex in a bad state and cause all subsequent down attempts to hang. Fixes: 671b53eec2ed ("sfc: Ensure down_write(&filter_sem) and up_write() are matched before calling efx_net_open()") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20rtnetlink: add IFLA_GROUP to ifla_policySerhey Popovych
Network interface groups support added while ago, however there is no IFLA_GROUP attribute description in policy and netlink message size calculations until now. Add IFLA_GROUP attribute to the policy. Fixes: cbda10fa97d7 ("net_device: add support for network device groups") Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20ipv6: Do not leak throw route referencesSerhey Popovych
While commit 73ba57bfae4a ("ipv6: fix backtracking for throw routes") does good job on error propagation to the fib_rules_lookup() in fib rules core framework that also corrects throw routes handling, it does not solve route reference leakage problem happened when we return -EAGAIN to the fib_rules_lookup() and leave routing table entry referenced in arg->result. If rule with matched throw route isn't last matched in the list we overwrite arg->result losing reference on throw route stored previously forever. We also partially revert commit ab997ad40839 ("ipv6: fix the incorrect return value of throw route") since we never return routing table entry with dst.error == -EAGAIN when CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point to check for RTF_REJECT flag since it is always set throw route. Fixes: 73ba57bfae4a ("ipv6: fix backtracking for throw routes") Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20sctp: handle errors when updating asocXin Long
It's a bad thing not to handle errors when updating asoc. The memory allocation failure in any of the functions called in sctp_assoc_update() would cause sctp to work unexpectedly. This patch is to fix it by aborting the asoc and reporting the error when any of these functions fails. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20sctp: uncork the old asoc before changing to the new oneXin Long
local_cork is used to decide if it should uncork asoc outq after processing some cmds, and it is set when replying or sending msgs. local_cork should always have the same value with current asoc q->cork in some way. The thing is when changing to a new asoc by cmd SET_ASOC, local_cork may not be consistent with the current asoc any more. The cmd seqs can be: SCTP_CMD_UPDATE_ASSOC (asoc) SCTP_CMD_REPLY (asoc) SCTP_CMD_SET_ASOC (new_asoc) SCTP_CMD_DELETE_TCB (new_asoc) SCTP_CMD_SET_ASOC (asoc) SCTP_CMD_REPLY (asoc) The 1st REPLY makes OLD asoc q->cork and local_cork both are 1, and the cmd DELETE_TCB clears NEW asoc q->cork and local_cork. After asoc goes back to OLD asoc, q->cork is still 1 while local_cork is 0. The 2nd REPLY will not set local_cork because q->cork is already set and it can't be uncorked and sent out because of this. To keep local_cork consistent with the current asoc q->cork, this patch is to uncork the old asoc if local_cork is set before changing to the new one. Note that the above cmd seqs will be used in the next patch when updating asoc and handling errors in it. Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20dccp: call inet_add_protocol after register_pernet_subsys in dccp_v6_initXin Long
Patch "call inet_add_protocol after register_pernet_subsys in dccp_v4_init" fixed a null pointer dereference issue for dccp_ipv4 module. The same fix is needed for dccp_ipv6 module. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20dccp: call inet_add_protocol after register_pernet_subsys in dccp_v4_initXin Long
Now dccp_ipv4 works as a kernel module. During loading this module, if one dccp packet is being recieved after inet_add_protocol but before register_pernet_subsys in which v4_ctl_sk is initialized, a null pointer dereference may be triggered because of init_net.dccp.v4_ctl_sk is 0x0. Jianlin found this issue when the following call trace occurred: [ 171.950177] BUG: unable to handle kernel NULL pointer dereference at 0000000000000110 [ 171.951007] IP: [<ffffffffc0558364>] dccp_v4_ctl_send_reset+0xc4/0x220 [dccp_ipv4] [...] [ 171.984629] Call Trace: [ 171.984859] <IRQ> [ 171.985061] [ 171.985213] [<ffffffffc0559a53>] dccp_v4_rcv+0x383/0x3f9 [dccp_ipv4] [ 171.985711] [<ffffffff815ca054>] ip_local_deliver_finish+0xb4/0x1f0 [ 171.986309] [<ffffffff815ca339>] ip_local_deliver+0x59/0xd0 [ 171.986852] [<ffffffff810cd7a4>] ? update_curr+0x104/0x190 [ 171.986956] [<ffffffff815c9cda>] ip_rcv_finish+0x8a/0x350 [ 171.986956] [<ffffffff815ca666>] ip_rcv+0x2b6/0x410 [ 171.986956] [<ffffffff810c83b4>] ? task_cputime+0x44/0x80 [ 171.986956] [<ffffffff81586f22>] __netif_receive_skb_core+0x572/0x7c0 [ 171.986956] [<ffffffff810d2c51>] ? trigger_load_balance+0x61/0x1e0 [ 171.986956] [<ffffffff81587188>] __netif_receive_skb+0x18/0x60 [ 171.986956] [<ffffffff8158841e>] process_backlog+0xae/0x180 [ 171.986956] [<ffffffff8158799d>] net_rx_action+0x16d/0x380 [ 171.986956] [<ffffffff81090b7f>] __do_softirq+0xef/0x280 [ 171.986956] [<ffffffff816b6a1c>] call_softirq+0x1c/0x30 This patch is to move inet_add_protocol after register_pernet_subsys in dccp_v4_init, so that v4_ctl_sk is initialized before any incoming dccp packets are processed. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 15:10:35 +0000