summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-22Documentation/bindings: net: marvell-pp2: add the system controllerAntoine Ténart
This patch documents the new marvell,system-controller property used by the Marvell ppv2 network driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: mvpp2: initialize the GoPAntoine Ténart
The patch adds GoP (group of ports) initialization functions. The mvpp2 driver was relying on the firmware/bootloader initialization; this patch moves this setup to the mvpp2 driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: mvpp2: set maximum packet size for 10G portsStefan Chulski
Set maximum packet size for XLG 10G ports. Missing maximum packet size for XLG configuration will cause kernel panic if oversized packet is received by port. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: mvpp2: initialize the XLG MAC when using a portAntoine Ténart
This adds a routine to initialize the XLG MAC at the port level when using a port and the XAUI/10GKR interface mode. This wasn't done until this commit, and the mvpp2 driver was relying on the bootloader/firmware initialization. This doesn't mean everything is configured in the mvpp2 driver now, but it helps reducing the gap. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: mvpp2: initialize the GMAC when using a portAntoine Ténart
This adds a routine to initialize the GMAC at the port level when using a port. This wasn't done until this commit, and the mvpp2 driver was relying on the bootloader/firmware initialization. This doesn't mean everything is configured in the mvpp2 driver now, but it helps reducing the gap. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: mvpp2: move the mii configuration in the ndo_open pathAntoine Ténart
This moves the mii configuration in the ndo_open path, to allow handling different mii configurations later and to switch between these configurations at runtime. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: mvpp2: fix the synchronization module bypass macro nameAntoine Ténart
The macro defining the bit to toggle to bypass or not the synchronization module is wrongly named. Writing 1 will disable bypass. This patch s/MVPP22_CTRL4_SYNC_BYPASS/MVPP22_CTRL4_SYNC_BYPASS_DIS/. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: mvpp2: unify register definitions coding styleAntoine Ténart
Cosmetic patch to use the same formatting rules on all register definitions. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22gre: introduce native tunnel support for ERSPANWilliam Tu
The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Meenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22udp: remove unreachable ufo branchesWillem de Bruijn
Remove two references to ufo in the udp send path that are no longer reachable now that ufo has been removed. Commit 85f1bd9a7b5a ("udp: consistently apply ufo or fragmentation") is a fix to ufo. It is safe to revert what remains of it. Also, no skb can enter ip_append_page with skb_is_gso true now that skb_shinfo(skb)->gso_type is no longer set in ip_append_page/_data. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: mdio-gpio: make mdiobb_ops constBhumika Goyal
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: ethernet: freescale: fs_enet: make mdiobb_ops constBhumika Goyal
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: ethernet: ax88796: make mdiobb_ops constBhumika Goyal
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22Merge branch 'tcp_conn_request-cleanup'David S. Miller
Tonghao Zhang says: ==================== tcp: Simplify the tcp_conn_request. Just simplify the tcp_conn_request function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22tcp: Remove the unused parameter for tcp_try_fastopen.Tonghao Zhang
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22tcp: Get a proper dst before checking it.Tonghao Zhang
tcp_peer_is_proven needs a proper route to make the determination, but dst always is NULL. This bug may be there at the beginning of git tree. This does not look serious enough to deserve backports to stable versions. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22Merge branch 'hv_netvsc-Ethtool-handler-to-change-UDP-hash-levels'David S. Miller
Haiyang Zhang says: ==================== hv_netvsc: Ethtool handler to change UDP hash levels The patch set adds the functions to switch UDP hash level between L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set differently. The default hash level is L4. We currently only allow switching TX hash level from within the guests. The ethtool callback function is triggered by command line, and update the per device variables of the hash level. On Azure, fragmented UDP packets is not yet supported with L4 hashing, and may have high packet loss rate. Using L3 hashing is recommended in this case. This ethtool option allows a user to make this selection. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22hv_netvsc: Update netvsc Document for UDP hash level settingHaiyang Zhang
Update Documentation/networking/netvsc.txt for UDP hash level setting and related info. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22hv_netvsc: Add ethtool handler to set and get UDP hash levelsHaiyang Zhang
The patch add the functions to switch UDP hash level between L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set differently. The default hash level is L4. We currently only allow switching TX hash level from within the guests. On Azure, fragmented UDP packets have high loss rate with L4 hashing. Using L3 hashing is recommended in this case. For example, for UDP over IPv4 on eth0: To include UDP port numbers in hasing: ethtool -N eth0 rx-flow-hash udp4 sdfn To exclude UDP port numbers in hasing: ethtool -N eth0 rx-flow-hash udp4 sd To show UDP hash level: ethtool -n eth0 rx-flow-hash udp4 Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22hv_netvsc: Clean up unused parameter from netvsc_get_rss_hash_opts()Haiyang Zhang
The parameter "nvdev" is not in use. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22hv_netvsc: Clean up unused parameter from netvsc_get_hash()Haiyang Zhang
The parameter "sk" is not in use. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22Merge branch 'liquidio-VF-driver-will-notify-NIC-firmware-of-MTU-change'David S. Miller
Veerasenareddy Burru says: ==================== liquidio: VF driver will notify NIC firmware of MTU change Make VF driver notify NIC firmware of MTU change. Firmware needs this information for MTU propagation and enforcement. The first patch in this series moves a macro definition to a proper place to prevent a build error in the second patch which has the code that sends the notification. Change Log: V1 -> V2 * Add "From:" line to patch #1 and #2 to give credit to the author. * In patch #2, order local variable declarations from longest to shortest line. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22liquidio: make VF driver notify NIC firmware of MTU changeVeerasenareddy Burru
Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22liquidio: move macro definition to a proper placeVeerasenareddy Burru
The macro LIO_CMD_WAIT_TM is not specific to the PF driver; it can be used by the VF driver too, so move its definition from a PF-specific header file to one that's common to PF and VF. Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22ptp: make ptp_clock_info constBhumika Goyal
Make these const as they are only used in a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct ptp_clock_info s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct ptp_clock_info s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: ethernet: make ptp_clock_info constBhumika Goyal
Make these const as they are only used in a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct ptp_clock_info s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct ptp_clock_info s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: hns3: Add support to change MTU in HNS3 hardwareSalil
This patch adds the following support to the HNS3 driver: 1. Support to change the Maximum Transmission Unit of a port in the HNS NIC hardware. 2. Initializes the supported MTU range for the netdevice. Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22Merge branch 'Huawei-HiNIC-Ethernet-Driver'David S. Miller
Aviad Krawczyk says: ==================== Huawei HiNIC Ethernet Driver The patch-set contains the support of the HiNIC Ethernet driver for hinic family of PCIE Network Interface Cards. The Huawei's PCIE HiNIC card is a new Ethernet card and hence there was a need of a new driver. The current driver is meant to be used for the Physical Function and there would soon be a support for Virtual Function and more features once the basic PF driver has been accepted. Changes V7 -> V8: 1. Remove unnecessary cast from void * - Stephen Hemminger comment https://lkml.org/lkml/2017/8/17/1008 Changes V6 -> V7: 1. Separate netpoll and MAINTAINERS patch - Sergei Shtylyov comment https://lkml.org/lkml/2017/8/17/479 Changes V5 -> V6: 1. Fix cover letter Message-Id Changes V4 -> V5: 1. Remove select_queue NOP - David Miller comment https://lkml.org/lkml/2017/8/16/625 Changes V3 -> V4: 1. Reverse christmas tree order - David Miller comment https://lkml.org/lkml/2017/8/3/862 Changes V2 -> V3: 1. Replace dev_ functions by netif_ functions - Joe Perches comment https://lkml.org/lkml/2017/7/19/424 2. Fix the driver directory in MAINTAINERS file - Sergei Shtylyov comment https://lkml.org/lkml/2017/7/19/615 3. Add a newline at the end of Makefile - David Miller comment https://lkml.org/lkml/2017/7/19/1345 4. Return a pointer as a val instead of in arg - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 5. Change the error labels to err_xyz - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 6. Remove check of Func Type in free function - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 7. Remove !netdev check in remove function - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 8. Use module_pci_driver - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 9. Move the PCI device ID to the .c file - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 10. Remove void * to avoid passing wrong ptr - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 Changes V1 -> V2: 1. remove driver verstion - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/372 2. replace kzalloc by devm_kzalloc for short clean - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/372 3. replace pr_ functions by dev_ functions - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/375 4. seperate last patch by moving ops to a new patch - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/377 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add MaintainerAviad Krawczyk
Update MAINTAINERS file Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add netpollAviad Krawczyk
Add more netdev operation - netpoll. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add ethtool and statsAviad Krawczyk
Add ethtool operations and statistics operations. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add Tx operationAviad Krawczyk
Add transmit operation for sending data by qp operations. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add Rx handlerAviad Krawczyk
Set the io resources in the nic and handle rx events by qp operations. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add cmdq completion handlerAviad Krawczyk
Add cmdq completion handler for getting a notification about the completion of cmdq commands. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add cmdq commandsAviad Krawczyk
Add cmdq commands for setting queue pair contexts in the nic. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add ceqsAviad Krawczyk
Initialize the completion event queues and handle ceq events by calling the registered handlers. Used for cmdq command completion. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize cmdqAviad Krawczyk
Create the work queues for cmdq and update the nic about the work queue contexts. cmdq commands are used for updating the nic about the qp contexts. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Set qp contextAviad Krawczyk
Update the nic about the resources of the queue pairs. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add qp resourcesAviad Krawczyk
Create the resources for queue pair operations: doorbell area, consumer index address and producer index address. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add wqAviad Krawczyk
Create work queues for being used by the queue pairs. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add logical Txq and RxqAviad Krawczyk
Create the logical queues of the nic. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add Rx mode and link event handlerAviad Krawczyk
Add port management message for setting Rx mode in the card, used for rx_mode netdev operation. The link event handler is used for getting a notification about the link state. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add port management commandsAviad Krawczyk
Add the port management commands that are sent as management messages. The port management commands are used for netdev operations. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add aeqsAviad Krawczyk
Handle aeq elements that are accumulated on the aeq by calling the registered handler for the specific event. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add api cmd commandsAviad Krawczyk
Add the api cmd commands for sending management messages to the nic. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add management messagesAviad Krawczyk
Add the management messages for sending to api cmd and the asynchronous event handler for the completion of the messages. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize api cmd hwAviad Krawczyk
Update the hardware about api cmd resources and initialize it. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize api cmd resourcesAviad Krawczyk
Initialize api cmd resources as part of management initialization. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize hw device componentsAviad Krawczyk
Initialize hw device by calling the initialization functions of aeqs and management channel. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Initialize hw interfaceAviad Krawczyk
Initialize hw interface as part of the nic initialization for accessing hw. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>