summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-10i40e: retry VFLR handling if there is ongoing VF resetRobert Malz
When a VFLR interrupt is received during a VF reset initiated from a different source, the VFLR may be not fully handled. This can leave the VF in an undefined state. To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR handling if the reset is not yet complete. This ensures the driver will properly complete the VF reset in such scenarios. Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10i40e: return false from i40e_reset_vf if reset is in progressRobert Malz
The function i40e_vc_reset_vf attempts, up to 20 times, to handle a VF reset request, using the return value of i40e_reset_vf as an indicator of whether the reset was successfully triggered. Currently, i40e_reset_vf always returns true, which causes new reset requests to be ignored if a different VF reset is already in progress. This patch updates the return value of i40e_reset_vf to reflect when another VF reset is in progress, allowing the caller to properly use the retry mechanism. Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10tools/resolve_btfids: Fix build when cross compiling kernel with clang.Suleiman Souhlal
When cross compiling the kernel with clang, we need to override CLANG_CROSS_FLAGS when preparing the step libraries. Prior to commit d1d096312176 ("tools: fix annoying "mkdir -p ..." logs when building tools in parallel"), MAKEFLAGS would have been set to a value that wouldn't set a value for CLANG_CROSS_FLAGS, hiding the fact that we weren't properly overriding it. Fixes: 56a2df7615fa ("tools/resolve_btfids: Compile resolve_btfids as host program") Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20250606074538.1608546-1-suleiman@google.com
2025-06-10pinctrl: sunxi: dt: Consider pin base when calculating bank number from pinChen-Yu Tsai
In prepare_function_table() when the pinctrl function table IRQ entries are generated, the pin bank is calculated from the absolute pin number; however the IRQ bank mux array is indexed from the first pin bank of the controller. For R_PIO controllers, this means the absolute pin bank is way off from the relative pin bank used for array indexing. Correct this by taking into account the pin base of the controller. Fixes: f5e2cd34b12f ("pinctrl: sunxi: allow reading mux values from DT") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/20250607135203.2085226-1-wens@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09Merge tag 'powerpc-6.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Madhavan Srinivasan: - a couple of fixes for out of bounds issues in memtrace and vas Thanks to Ritesh Harjani (IBM), Haren Myneni, and Jonathan Greental * tag 'powerpc-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vas: Return -EINVAL if the offset is non-zero in mmap() powerpc/powernv/memtrace: Fix out of bounds issue in memtrace mmap
2025-06-10powerpc/vas: Return -EINVAL if the offset is non-zero in mmap()Haren Myneni
The user space calls mmap() to map VAS window paste address and the kernel returns the complete mapped page for each window. So return -EINVAL if non-zero is passed for offset parameter to mmap(). See Documentation/arch/powerpc/vas-api.rst for mmap() restrictions. Co-developed-by: Jonathan Greental <yonatan02greental@gmail.com> Signed-off-by: Jonathan Greental <yonatan02greental@gmail.com> Reported-by: Jonathan Greental <yonatan02greental@gmail.com> Fixes: dda44eb29c23 ("powerpc/vas: Add VAS user space API") Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250610021227.361980-2-maddy@linux.ibm.com
2025-06-10powerpc/powernv/memtrace: Fix out of bounds issue in memtrace mmapRitesh Harjani (IBM)
memtrace mmap issue has an out of bounds issue. This patch fixes the by checking that the requested mapping region size should stay within the allocated region size. Reported-by: Jonathan Greental <yonatan02greental@gmail.com> Fixes: 08a022ad3dfa ("powerpc/powernv/memtrace: Allow mmaping trace buffers") Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250610021227.361980-1-maddy@linux.ibm.com
2025-06-09Merge tag 'for-net-2025-06-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - MGMT: Fix UAF on mgmt_remove_adv_monitor_complete - MGMT: Protect mgmt_pending list with its own lock - hci_core: fix list_for_each_entry_rcu usage - btintel_pcie: Increase the tx and rx descriptor count - btintel_pcie: Reduce driver buffer posting to prevent race condition - btintel_pcie: Fix driver not posting maximum rx buffers * tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Protect mgmt_pending list with its own lock Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race condition Bluetooth: btintel_pcie: Increase the tx and rx descriptor count Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffers Bluetooth: hci_core: fix list_for_each_entry_rcu usage ==================== Link: https://patch.msgid.link/20250605191136.904411-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09net_sched: sch_sfq: fix a potential crash on gso_skb handlingEric Dumazet
SFQ has an assumption of always being able to queue at least one packet. However, after the blamed commit, sch->q.len can be inflated by packets in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed by an immediate drop. Fix sfq_drop() to properly clear q->tail in this situation. Tested: ip netns add lb ip link add dev to-lb type veth peer name in-lb netns lb ethtool -K to-lb tso off # force qdisc to requeue gso_skb ip netns exec lb ethtool -K in-lb gro on # enable NAPI ip link set dev to-lb up ip -netns lb link set dev in-lb up ip addr add dev to-lb 192.168.20.1/24 ip -netns lb addr add dev in-lb 192.168.20.2/24 tc qdisc replace dev to-lb root sfq limit 100 ip netns exec lb netserver netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback") Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de> Closes: https://lore.kernel.org/netdev/9da42688-bfaa-4364-8797-e9271f3bdaef@hetzner-cloud.de/ Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250606165127.3629486-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in the non-uapi headersThomas Huth
While the GCC and Clang compilers already define __ASSEMBLER__ automatically when compiling assembly code, __ASSEMBLY__ is a macro that only gets defined by the Makefiles in the kernel. This can be very confusing when switching between userspace and kernelspace coding, or when dealing with uapi headers that rather should use __ASSEMBLER__ instead. So let's standardize on the __ASSEMBLER__ macro that is provided by the compilers now. This is a completely mechanical patch (done with a simple "sed -i" statement). Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headersThomas Huth
__ASSEMBLY__ is only defined by the Makefile of the kernel, so this is not really useful for uapi headers (unless the userspace Makefile defines it, too). Let's switch to __ASSEMBLER__ which gets set automatically by the compiler when compiling assembly code. Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09ARC: unwind: Use built-in sort swap to reduce code size and improve performanceYu-Chun Lin
The custom swap function used in sort() was identical to the default built-in sort swap. Remove the custom swap function and passes NULL to sort(), allowing it to use the default swap function. This change reduces code size and improves performance, particularly when CONFIG_MITIGATION_RETPOLINE is enabled. With RETPOLINE mitigation, indirect function calls incur significant overhead, and using the default swap function avoids this cost. $ ./scripts/bloat-o-meter ./unwind.o.old ./unwind.o.new add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-22 (-22) Function old new delta init_unwind_hdr.constprop 544 540 -4 swap_eh_frame_hdr_table_entries 18 - -18 Total: Before=4410, After=4388, chg -0.50% Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09ARC: atomics: Implement arch_atomic64_cmpxchg using _relaxedJason Gunthorpe
The core atomic code has a number of macros where it elaborates architecture primitives into more functions. ARC uses arch_atomic64_cmpxchg() as it's architecture primitive which disable alot of the additional functions. Instead provide arch_cmpxchg64_relaxed() as the primitive and rely on the core macros to create arch_cmpxchg64(). The macros will also provide other functions, for instance, try_cmpxchg64_release(), giving a more complete implementation. Suggested-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/Z0747n5bSep4_1VX@J2N7QTR9R3 Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09pinctrl: tb10x: Drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF warning: pinctrl-tb10x.c:815:34: warning: unused variable 'tb10x_pinctrl_dt_ids' [-Wunused-const-variable] Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505301317.EI1caRC0-lkp@intel.com/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250601105100.27927-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: MAINTAINERS: Drop bouncing Jianlong HuangKrzysztof Kozlowski
Emails to Jianlong Huang bounce since 9 months, so drop the person from maintainers: 550 5.4.1 Recipient address rejected: Access denied. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250528104514.184122-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: st: Drop unused st_gpio_bank() functionKrzysztof Kozlowski
Static inline st_gpio_bank() function is not referenced: pinctrl-st.c:377:19: error: unused function 'st_gpio_bank' [-Werror,-Wunused-function] Fixes: 701016c0cba5 ("pinctrl: st: Add pinctrl and pinconf support.") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250528092201.52132-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: qcom: pinctrl-qcm2290: Add missing pinsWojciech Slenska
Added the missing pins to the qcm2290_pins table. Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com> Fixes: 48e049ef1238 ("pinctrl: qcom: Add QCM2290 pinctrl driver") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250523101437.59092-1-wojciech.slenska@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: qcom: switch to devm_gpiochip_add_data()Dmitry Baryshkov
In order to simplify cleanup actions, use devres-enabled version of gpiochip_add_data(). As the msm_pinctrl_remove() function is now empty, drop it and all its calls from the corresponding pinctrl drivers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-3-249999af0fc1@oss.qualcomm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-08Linux 6.16-rc1v6.16-rc1Linus Torvalds
2025-06-08Merge tag 'turbostat-2025.06.08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Add initial DMR support, which required smarter RAPL probe - Fix AMD MSR RAPL energy reporting - Add RAPL power limit configuration output - Minor fixes * tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 2025.06.08 tools/power turbostat: Add initial support for BartlettLake tools/power turbostat: Add initial support for DMR tools/power turbostat: Dump RAPL sysfs info tools/power turbostat: Avoid probing the same perf counters tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared tools/power turbostat: Clean up add perf/msr counter logic tools/power turbostat: Introduce add_msr_counter() tools/power turbostat: Remove add_msr_perf_counter_() tools/power turbostat: Remove add_cstate_perf_counter_() tools/power turbostat: Remove add_rapl_perf_counter_() tools/power turbostat: Quit early for unsupported RAPL counters tools/power turbostat: Always check rapl_joules flag tools/power turbostat: Fix AMD package-energy reporting tools/power turbostat: Fix RAPL_GFX_ALL typo tools/power turbostat: Add Android support for MSR device handling tools/power turbostat.8: pm_domain wording fix tools/power turbostat.8: fix typo: idle_pct should be pct_idle
2025-06-08Merge tag 'timers-cleanups-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanup from Thomas Gleixner: "The delayed from_timer() API cleanup: The renaming to the timer_*() namespace was delayed due massive conflicts against Linux-next. Now that everything is upstream finish the conversion" * tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide, timers: Rename from_timer() to timer_container_of()
2025-06-08Merge tag 'x86-urgent-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of x86 fixes: - Cure IO bitmap inconsistencies A failed fork cleans up all resources of the newly created thread via exit_thread(). exit_thread() invokes io_bitmap_exit() which does the IO bitmap cleanups, which unfortunately assume that the cleanup is related to the current task, which is obviously bogus. Make it work correctly - A lockdep fix in the resctrl code removed the clearing of the command buffer in two places, which keeps stale error messages around. Bring them back. - Remove unused trace events" * tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex x86/iopl: Cure TIF_IO_BITMAP inconsistencies x86/fpu: Remove unused trace events
2025-06-08Merge tag 'timers-urgent-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Add the missing seq_file forward declaration in the timer namespace header" * tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timens: Add struct seq_file forward declaration
2025-06-08tools/power turbostat: version 2025.06.08Len Brown
Add initial DMR support, which required smarter RAPL probe Fix AMD MSR RAPL energy reporting Add RAPL power limit configuration output Minor fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add initial support for BartlettLakeZhang Rui
Add initial support for BartlettLake. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add initial support for DMRZhang Rui
Add initial support for DMR. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Dump RAPL sysfs infoZhang Rui
for example: intel-rapl:1: psys 28.0s:100W 976.0us:100W intel-rapl:0: package-0 28.0s:57W,max:15W 2.4ms:57W intel-rapl:0/intel-rapl:0:0: core disabled intel-rapl:0/intel-rapl:0:1: uncore disabled intel-rapl-mmio:0: package-0 28.0s:28W,max:15W 2.4ms:57W [lenb: simplified format] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> squish me Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Avoid probing the same perf countersZhang Rui
For the RAPL package energy status counter, Intel and AMD share the same perf_subsys and perf_name, but with different MSR addresses. Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are introduced to describe this counter for different Vendors. As a result, the perf counter is probed twice, and causes a failure in in get_rapl_counters() because expected_read_size and actual_read_size don't match. Fix the problem by skipping the already probed counter. Note, this is not a perfect fix. For example, if different vendors/platforms use the same MSR value for different purpose, the code can be fooled when it probes a rapl_counter_arch_infos[] entry that does not belong to the running Vendor/Platform. In a long run, better to put rapl_counter_arch_infos[] into the platform_features so that this becomes Vendor/Platform specific. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs ↵Zhang Rui
cleared platform_features->rapl_msrs describes the RAPL MSRs supported. While RAPL Perf counters can be exposed from different kernel backend drivers, e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver. Thus, turbostat should first blindly probe all the available RAPL Perf counters, and falls back to the RAPL MSR counters if they are listed in platform_features->rapl_msrs. With this, platforms that don't have RAPL MSRs can clear the platform_features->rapl_msrs bits and use RAPL Perf counters only. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Clean up add perf/msr counter logicZhang Rui
Increase the code readability by moving the no_perf/no_msr flag and the cai->perf_name/cai->msr sanity checks into the counter probe functions. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Introduce add_msr_counter()Zhang Rui
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR counters and MPERF/APERF/SMI MSR counters, thus its name is misleading. Similar to add_perf_counter(), introduce add_msr_counter() to probe a counter via MSR. Introduce wrapper function add_rapl_msr_counter() at the same time to add extra check for Zero return value for specified RAPL counters. No functional change intended. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_msr_perf_counter_()Zhang Rui
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_msr_perf_counter_() and move all the logic to add_msr_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_cstate_perf_counter_()Zhang Rui
As the only caller of add_cstate_perf_counter_(), add_cstate_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_cstate_perf_counter_() and move all the logic to add_cstate_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_rapl_perf_counter_()Zhang Rui
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_rapl_perf_counter_() and move all the logic to add_rapl_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Quit early for unsupported RAPL countersZhang Rui
Quit early for unsupported RAPL counters. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Always check rapl_joules flagZhang Rui
rapl_joules bit should always be checked even if platform_features->rapl_msrs is not set or no_msr flag is used. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Fix AMD package-energy reportingGautham R. Shenoy
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") that adds support to read RAPL counters via perf defines the notion of a RAPL domain_id which is set to physical_core_id on platforms which support per_core_rapl counters (Eg: AMD processors Family 17h onwards) and is set to the physical_package_id on all the other platforms. However, the physical_core_id is only unique within a package and on platforms with multiple packages more than one core can have the same physical_core_id and thus the same domain_id. (For eg, the first cores of each package have the physical_core_id = 0). This results in all these cores with the same physical_core_id using the same entry in the rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the perf-initialization for cores whose domain_ids have already been visited, cores that have the same physical_core_id always read the perf file corresponding to the physical_core_id of the first package and thus the package-energy is incorrectly reported to be the same value for different packages. Note: This issue only arises when RAPL counters are read via perf and not when they are read via MSRs since in the latter case the MSRs are read separately on each core. Fix this issue by associating each CPU with rapl_core_id which is unique across all the packages in the system. Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Fix RAPL_GFX_ALL typoKaushlendra Kumar
Fix typo in the currently unused RAPL_GFX_ALL macro definition. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add Android support for MSR device handlingKaushlendra Kumar
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr, updates error messages and permission checks to reflect the Android device path, and wraps platform-specific code with #if defined(ANDROID) to ensure correct behavior on both Android and non-Android systems. These changes improve compatibility and usability of turbostat on Android devices. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat.8: pm_domain wording fixLen Brown
turbostat.8: clarify that uncore "domains" are Power Management domains, aka pm_domains. Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat.8: fix typo: idle_pct should be pct_idleLen Brown
idle_pct should be pct_idle Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08Merge tag 'perf-urgent-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fix from Thomas Gleixner: "A single fix for the x86 performance counters on Intel CPUs: The MSR offset calculations for fixed performance counters are stored at the wrong index in the configuration array causing the general purpose counter MSR offset to be overwritten, so both the general purpose and the fixed counters offsets are incorrect. Correct the array index calculation to fix that" * tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix incorrect MSR index calculations in intel_pmu_config_acr()
2025-06-08Merge tag 'irq-urgent-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix for the PCI/MSI code: The conversion to per device MSI domains created a MSI domain with size 1 instead of sizing it to the maximum possible number of MSI interrupts for the device. This "worked" as the subsequent allocations resized the domain, but the recent change to move the prepare() call into the domain creation path broke this works by chance mechanism. Size the domain properly at creation time" * tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Size device MSI domain with the maximum number of vectors
2025-06-08Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull mount fixes from Al Viro: "Various mount-related bugfixes: - split the do_move_mount() checks in subtree-of-our-ns and entire-anon cases and adapt detached mount propagation selftest for mount_setattr - allow clone_private_mount() for a path on real rootfs - fix a race in call of has_locked_children() - fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP - make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right userns - avoid false negatives in path_overmount() - don't leak MNT_LOCKED from parent to child in finish_automount() - do_change_type(): refuse to operate on unmounted/not ours mounts" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_change_type(): refuse to operate on unmounted/not ours mounts clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns selftests/mount_setattr: adapt detached mount propagation test do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases fs: allow clone_private_mount() for a path on real rootfs fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2) finish_automount(): don't leak MNT_LOCKED from parent to child path_overmount(): avoid false negatives fs/fhandle.c: fix a race in call of has_locked_children()
2025-06-08Merge tag '6.16-rc-part2-smb3-client-fixes' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull more smb client updates from Steve French: - multichannel/reconnect fixes - move smbdirect (smb over RDMA) defines to fs/smb/common so they will be able to be used in the future more broadly, and a documentation update explaining setting up smbdirect mounts - update email address for Paulo * tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal version number MAINTAINERS, mailmap: Update Paulo Alcantara's email address cifs: add documentation for smbdirect setup cifs: do not disable interface polling on failure cifs: serialize other channels when query server interfaces is pending cifs: deal with the channel loading lag while picking channels smb: client: make use of common smbdirect_socket_parameters smb: smbdirect: introduce smbdirect_socket_parameters smb: client: make use of common smbdirect_socket smb: smbdirect: add smbdirect_socket.h smb: client: make use of common smbdirect.h smb: smbdirect: add smbdirect.h with public structures smb: client: make use of common smbdirect_pdu.h smb: smbdirect: add smbdirect_pdu.h with protocol definitions
2025-06-08Merge tag 'trace-v6.16-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull more tracing fixes from Steven Rostedt: - Fix regression of waiting a long time on updating trace event filters When the faultable trace points were added, it needed task trace RCU synchronization. This was added to the tracepoint_synchronize_unregister() function. The filter logic always called this function whenever it updated the trace event filters before freeing the old filters. This increased the time of "trace-cmd record" from taking 13 seconds to running over 2 minutes to complete. Move the freeing of the filters to call_rcu*() logic, which brings the time back down to 13 seconds. - Fix ring_buffer_subbuf_order_set() error path lock protection The error path of the ring_buffer_subbuf_order_set() released the mutex too early and allowed subsequent accesses to setting the subbuffer size to corrupt the data and cause a bug. By moving the mutex locking to the end of the error path, it prevents the reentrant access to the critical data and also allows the function to convert the taking of the mutex over to the guard() logic. - Remove unused power management clock events The clock events were added in 2010 for power management. In 2011 arm used them. In 2013 the code they were used in was removed. These events have been wasting memory since then. - Fix sparse warnings There was a few places that sparse warned about trace_events_filter.c where file->filter was referenced directly, but it is annotated with an __rcu tag. Use the helper functions and fix them up to use rcu_dereference() properly. * tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Add rcu annotation around file->filter accesses tracing: PM: Remove unused clock events ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set() tracing: Fix regression of filter waiting a long time on RCU synchronization
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-06-07Merge tag 'kbuild-v6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a symbol only to specified modules - Improve ABI handling in gendwarfksyms - Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n - Add checkers for redundant or missing <linux/export.h> inclusion - Deprecate the extra-y syntax - Fix a genksyms bug when including enum constants from *.symref files * tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) genksyms: Fix enum consts from a reference affecting new values arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES} efi/libstub: use 'targets' instead of extra-y in Makefile module: make __mod_device_table__* symbols static scripts/misc-check: check unnecessary #include <linux/export.h> when W=1 scripts/misc-check: check missing #include <linux/export.h> when W=1 scripts/misc-check: add double-quotes to satisfy shellcheck kbuild: move W=1 check for scripts/misc-check to top-level Makefile scripts/tags.sh: allow to use alternative ctags implementation kconfig: introduce menu type enum docs: symbol-namespaces: fix reST warning with literal block kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION docs/core-api/symbol-namespaces: drop table of contents and section numbering modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time kbuild: move kbuild syntax processing to scripts/Makefile.build Makefile: remove dependency on archscripts for header installation Documentation/kbuild: Add new gendwarfksyms kABI rules Documentation/kbuild: Drop section numbers ...
2025-06-07Merge tag 'sh-for-v6.16-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: - replace the __ASSEMBLY__ with __ASSEMBLER__ macro in all headers since the latter is now defined automatically by both GCC and Clang when compiling assembly code (Thomas Huth) - set the default SPI mode for the ecovec24 board which became necessary after a new mode member as added to the sh_msiof_spi_info struct in cf9e4784f3bd ("spi: sh-msiof: Add slave mode support") (Geert Uytterhoeven) - remove unused variables in the kprobes code in kprobe_exceptions_notify() (Mike Rapoport) * tag 'sh-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: kprobes: Remove unused variables in kprobe_exceptions_notify() sh: ecovec24: Make SPI mode explicit sh: Replace __ASSEMBLY__ with __ASSEMBLER__ in all headers
2025-06-07Merge tag 'loongarch-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Adjust the 'make install' operation - Support SCHED_MC (Multi-core scheduler) - Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS - Enable HAVE_ARCH_STACKLEAK - Increase max supported CPUs up to 2048 - Introduce the numa_memblks conversion - Add PWM controller nodes in dts - Some bug fixes and other small changes * tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: platform/loongarch: laptop: Unregister generic_sub_drivers on exit platform/loongarch: laptop: Add backlight power control support platform/loongarch: laptop: Get brightness setting from EC on probe LoongArch: dts: Add PWM support to Loongson-2K2000 LoongArch: dts: Add PWM support to Loongson-2K1000 LoongArch: dts: Add PWM support to Loongson-2K0500 LoongArch: vDSO: Correctly use asm parameters in syscall wrappers LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset() LoongArch: Preserve firmware configuration when desired LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg LoongArch: Introduce the numa_memblks conversion LoongArch: Increase max supported CPUs up to 2048 LoongArch: Enable HAVE_ARCH_STACKLEAK LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS LoongArch: Add SCHED_MC (Multi-core scheduler) support LoongArch: Add some annotations in archhelp LoongArch: Using generic scripts/install.sh in `make install` LoongArch: Add a default install.sh