summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-24ARM: dts: imx6dl-victgo.dts: Factor out common parts to imx6qdl-victgo.dtsiDavid Jander
These parts are common to imx6qdl-vicut1.dtsi. This patch is preparation to unify victgo and vicut1 DTs. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6dl-victgo.dts: update gpio namesDavid Jander
Following changes was made: - Add MDIO signal names - Add missing ISB_IN2 name. Also correct ISB_nIN1. These two signals were used together in older HW revisions. Later ISB_IN2 was removed. Software should still be able to use both. - Add missing CAN1 and UART line names - Add missing ON1/2_CTRL line names - fix CPU_* line names. The real signal names are without the CPU_ prefix, like on imx6qdl-vicut1.dtsi - Fix ETH_INT signal name Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6q-vicut1.dts: remove sata nodeDavid Jander
Only the prototype had the SATA interface. There are no existing products with SATA interface and no plans to add any. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Remove conflicting pinctrl entryDavid Jander
The function of DISP0_DAT9 is dependent on hardware revision of two particular variants. This setting should be done by the bootloader anyway, and is not needed in the kernel, so remove it from the DT. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Update GPIO line namesDavid Jander
Add some missing names and remove names to pins that have never been used and/or are not present on any hardware. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Fix debug LED gpio pinsDavid Jander
While there are LEDs connected on some variants on GPIO4 pins 16 and 17, those are not the debug LEDs that should be visible to user-space. It should be the same as in imx6dl-victgo.dtsi. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Fix LED namesDavid Jander
The names should be consistent with the names in imx6dl-victgo.dts This patch is preparation to unify vicut1 and victgo DTs. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1/victgo: Remove UART2David Jander
Only first prototype had UART2 and there are no plans to add it in the future. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Remove PCIeDavid Jander
Only the very first prototypes had PCIe and there are no plant to add it in the future. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: Put nON_SWITCH in own pinctrl grpDavid Jander
Unify nON_SWITCH pinctrl configuration with imx6dl-victgo.dts. This patch is a preparation to reduce duplicated code between vicut1 and victgo. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-24ARM: dts: imx6qdl-vicut1.dtsi: remove TiWi moduleDavid Jander
Only the first prototypes had a TiWi module. There is no publicly available hardware where this module is fitted and there are no plan to produce any. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: Add support for Toradex Aster carrier boardMax Krummenacher
Add support for Toradex Aster, small form-factor with header compatible with Arduino Uno and Raspberry Pi (RPi) maker boards. Additional detail available at https://www.toradex.com/products/carrier-boards/aster-carrier-board Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: Add support for Toradex Iris carrier boardsMax Krummenacher
Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm Computer Module family Carrier Board. Additional details available at https://www.toradex.com/products/carrier-board/iris-carrier-board Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: Add usdhc1 sleep pin configurationMax Krummenacher
The Toradex board Iris V2 has a SD-card slot with switchable power. Add a pinctrl sleep used when the card power is off to avoid backfeeding to the card and add the "sleep" pinctrl to the usdhc1 controller. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: CleanupMax Krummenacher
- Sort pinctrl nodes alphabetically - End all pinctrl node names in grp and avoid using dashes - Change pinctrl_usbc_id_1's node name to not use underscores - Change the pmic's node name to pmic@8 per binding requirement - Add sound-dai-cells to the codec node per binding requirement Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: Move common nodes to SoM dtsiMax Krummenacher
The following two nodes define module level functionality, move them from the carrier board dts file to the SoM file. While at it, reorder the properties in the gpio-keys node alphabetical. - gpio-keys defining the wakeup pin - memory node The atmel touchscreen node can be used on any carrier board. Move it from the carrier board to the module-level device tree and keep it disabled. Set the default pinmuxing to the dedicated connector available on newer carrier boards and rename the pinctrl labels specifying the INT/Reset signal to a common pattern. pinctrl_atmel_conn - uses 107/106 pins as used on dedicated connector pinctrl_atmel_adap - uses 28/30 pins as used with jumper wires Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: Add additional pingroupsMax Krummenacher
The Toradex board Iris V2 has an LVDS transceiver which is configured with 4 signals. Add corresponding pins into the separate pingroup to be able to manage the transceiver. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: Command pmic to standby for poweroffMax Krummenacher
The Colibri iMX6 HW doesn't allow to use the PWR_ON_REQ signal for poweroff. Use the fsl,pmic-stby-poweroff property to command the PMIC into a low power mode in poweroff. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: Disable add-on accessoriesMax Krummenacher
The Toradex Colibri family is composed of SoM that can be plugged in various carrier board, with carrier boards allowing multiple optional add-on (e.g. display, camera, ...). Keep all the SoM specific part into the module .dtsi, disabling everything that is not self-contained on the board. The carrier board dts can reuse/enable anything that is defined in the module dtsi. Additional device tree overlays can be used for any accessories that are plugged in the carrier board. Disable parallel RGB: The parallel RGB interface (lcd_display) and all related nodes can be enabled in an overlay if used. Keep all nodes disabled in the module-level device tree. Rename display interface node to match imx6qdl-apalis to make it easier to use overlays. The pwm-backlight binding now requires the power-supply property, add it. Disable stmpe touchscreen: The touchscreen can be enabled in an overlay if used. Add labels to the stmpe sub nodes. Disable hdmi interface: HDMI can be enabled in an overlay if used. Update SPDX-License spelling to latest convention. Update Copyright year. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: Add gpio-line-namesOleksandr Suvorov
Add GPIO line names on module level. Those are all GPIOs which a user might use on his custom carrier board. If more meaningful names are available on the carrier board, the user can overwrite the line names in the carrier board level device tree. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-19ARM: dts: imx6dl-colibri: Fix I2C pinmuxingMax Krummenacher
Fix names of extra pingroup node and property for gpio bus recovery. Without the change i2c2 is not functional. Fixes: 56f0df6b6b58 ("ARM: dts: imx*(colibri|apalis): add missing recovery modes to i2c") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-18ARM: dts: imx6dl-colibri: Drop dedicated v1.1 device treeMax Krummenacher
Drop Colibri V1.1 device tree, this is just a duplicate of Colibri V1.0 with the possibility to use SD cards in UHS mode if the carrier board does not have 3.3V pull up resistor. The dedicated device tree kept the feature switched of by setting the no-1-8-v property and thus does not offer anything different than what the regular device tree does. Thus drop the dedicated device tree and merge the preparation to allow enabling the feature should a carrier without pull ups be used into the regular device tree. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-11ARM: dts: imx: align SPI NOR node name with dtschemaKrzysztof Kozlowski
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-11ARM: dts: ci4x10: Adapt to changes in imx6qdl.dtsi regarding fec clocksThorsten Scherer
Commit f3e7dae323ab ("ARM: dts: imx6qdl: add enet_out clk support") added another item to the list of clocks for the fec device. As imx6dl-eckelmann-ci4x10.dts only overwrites clocks, but not clock-names this resulted in an inconsistency with clocks having one item more than clock-names. Also overwrite clock-names with the same value as in imx6qdl.dtsi. This is a no-op today, but prevents similar inconsistencies if the soc file will be changed in a similar way in the future. Signed-off-by: Thorsten Scherer <t.scherer@eckelmann.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: f3e7dae323ab ("ARM: dts: imx6qdl: add enet_out clk support") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-11ARM: dts: imx6qdl-tx6: Drop some duplicated propertiesUwe Kleine-König
clocks and clock-names are already present in imx6qdl.dtsi since commit f3e7dae323ab ("ARM: dts: imx6qdl: add enet_out clk support"). The change to imx6qdl.dtsi was explicitly done to avoid this construct in this file, so benefit from the change and drop these properties. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-09ARM: dts: imx7s: fix iomuxc_lpsr node nameAlexander Stein
Schema requires the node being named 'pinctrl'. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ul: peb-av-02: move to 3 cell pwmAndrej Picej
Instead of changing default pwm-cells property, use the default "#pwm-cells = <3>" and add the third option. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULLAlexander Bauer
Add support for the PHYTEC phyGATE-Tauri-S with i.MX 6ULL with eMMC or NAND. Supported features: * eMMC/NAND * i2c RTC * i2c TEMP * PMIC * PWM * debug UART * CAN * SD card * 2x 1Gbit Ethernet * RS232/RS485 * USB 2.0 Host * TPM * SPI-NOR Signed-off-by: Alexander Bauer <a.bauer@phytec.de> Signed-off-by: Jens Lang <j.lang@phytec.de> Signed-off-by: Andrej Picej <andrej.picej@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ull: add TQ-Systems MBa6ULLxL device treesAlexander Stein
Add device trees for the MBa6ULx mainboard with TQMa6ULLxL SoMs. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ull: add TQ-Systems MBa6ULLx device treesAlexander Stein
Add device trees for the MBa6ULx mainboard with TQMa6ULLx SoMs. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ul: add TQ-Systems MBa6ULxL device treesAlexander Stein
Add device trees for the MBa6ULx mainboard with TQMa6ULxL SoMs. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6ul: add TQ-Systems MBa6ULx device treesAlexander Stein
Add device trees for the MBa6ULx mainboard with TQMa6ULx SoMs. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6qdl-victgo: add CAN termination supportDavid Jander
The gpio1 0 pin is controlling CAN termination, not USB H1 VBUS. So, remove wrong regulator and assign this gpio to new DT CAN termination property. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6dl-victgo: The TGO uses a lg,lb070wv8 compatible 7" displayRobin van der Gracht
This series of devices is using lg,lb070wv8 instead of kyo,tcg121xglp. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6dl-victgo: Add interrupt-counter nodesRobin van der Gracht
Interrupt counter is mainlined, now we can add missing counter nodes. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6qdl-vicut1: update gpio-line-names for some GPIOsDavid Jander
countedX lines have different board names (YACO_x). And REV_ and BOARD_ pins have multiple functions. So, use names exposed to the OS. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6qdl-vicut1/vicutgo: Add backlight_led nodeDavid Jander
backlight_led is the dimmable backlight for the rubber border on the case. It is also used to highlight the power- and some other buttons. MX6QDL_PAD_SD4_DAT1__PWM3_OUT is also assigned as output for pwm3. Since we need pwm3 for the backlight, we're forced to disable user space hardware revision detection. The bootloader will have to supply this information (i.e. through device tree). Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6qdl-vicut1/vicutgo: Rename backlight to backlight_lcdDavid Jander
We have two backlight sources on this boards. Use more specific name for the LCD backlight to see the difference. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-06ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximumDavid Jander
Recover default behavior of the device and set maximal brightness Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-04-03Linux 5.18-rc1v5.18-rc1Linus Torvalds
2022-04-03Merge tag 'trace-v5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
2022-04-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
2022-04-03Merge tag 'x86-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
2022-04-03Merge tag 'core-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
2022-04-03Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
2022-04-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
2022-04-02Revert "clk: Drop the rate range on clk_put()"Stephen Boyd
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
2022-04-02Merge tag 'perf-tools-for-v5.18-2022-04-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Avoid SEGV if core.cpus isn't set in 'perf stat'. - Stop depending on .git files for building PERF-VERSION-FILE, used in 'perf --version', fixing some perf tools build scenarios. - Convert tracepoint.py example to python3. - Update UAPI header copies from the kernel sources: socket, mman-common, msr-index, KVM, i915 and cpufeatures. - Update copy of libbpf's hashmap.c. - Directly return instead of using local ret variable in evlist__create_syswide_maps(), found by coccinelle. * tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf python: Convert tracepoint.py example to python3 perf evlist: Directly return instead of using local ret variable perf cpumap: More cpu map reuse by merge. perf cpumap: Add is_subset function perf evlist: Rename cpus to user_requested_cpus perf tools: Stop depending on .git files for building PERF-VERSION-FILE tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf beauty: Update copy of linux/socket.h with the kernel sources perf tools: Update copy of libbpf's hashmap.c perf stat: Avoid SEGV if core.cpus isn't set
2022-04-02Merge tag 'kbuild-fixes-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix empty $(PYTHON) expansion. - Fix UML, which got broken by the attempt to suppress Clang warnings. - Fix warning message in modpost. * tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: restore the warning message for missing symbol versions Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS" kbuild: Remove '-mno-global-merge' kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh kconfig: remove stale comment about removed kconfig_print_symbol()
2022-04-02Merge tag 'mips_5.18_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - build fix for gpio - fix crc32 build problems - check for failed memory allocations * tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: crypto: Fix CRC32 code MIPS: rb532: move GPIOD definition into C-files MIPS: lantiq: check the return value of kzalloc() mips: sgi-ip22: add a check for the return of kzalloc()
generated by cgit (git 2.34.1) at 2025-07-16 10:34:17 +0000