summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-06drm/msm/dpu: drop redundant plane dst check from dpu_crtc_atomic_check()Dmitry Baryshkov
The helper drm_atomic_helper_check_plane_state() already checks whether the scaled and clipped plane falls into the CRTC visible region (and clears plane_state->visible if it doesn't). Drop the redundant check from dpu_crtc_atomic_check(). Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527343/ Link: https://lore.kernel.org/r/20230316161653.4106395-18-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: move the rest of plane checks to dpu_plane_atomic_check()Dmitry Baryshkov
Move plane state updates from dpu_crtc_atomic_check() to the function where they belong: to dpu_plane_atomic_check(). Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527335/ Link: https://lore.kernel.org/r/20230316161653.4106395-17-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: don't use unsupported blend stagesDmitry Baryshkov
The dpu_crtc_atomic_check() compares blending stage with DPU_STAGE_MAX (maximum amount of blending stages supported by the driver), however we should compare it against .max_mixer_blendstages, the maximum blend stage supported by the mixer. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527338/ Link: https://lore.kernel.org/r/20230316161653.4106395-16-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: drop src_split and multirect check from dpu_crtc_atomic_checkDmitry Baryshkov
Neither source split nor multirect are properly supported at this moment. Both of these checks depend on normalized_zpos being equal for several planes (which is never the case for normalized zpos). Drop these checks to simplify dpu_crtc_atomic_check(). The actual support for either of these features is not removed from the backend code (sspp, ctl, etc). Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527332/ Link: https://lore.kernel.org/r/20230316161653.4106395-15-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: rename dpu_hw_sspp_cfg to dpu_sw_pipe_cfgDmitry Baryshkov
As struct dpu_hw_sspp_cfg describes only the source and destination rectangles, it is a software pipe configuration now. Rename it accordingly. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527334/ Link: https://lore.kernel.org/r/20230316161653.4106395-14-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: remove dpu_hw_fmt_layout from struct dpu_hw_sspp_cfgDmitry Baryshkov
Remove dpu_hw_fmt_layout instance from struct dpu_hw_sspp_cfg, leaving only src_rect and dst_rect. This way all the pipes used by the plane will have a common layout instance (as the framebuffer is shared between them), while still keeping a separate src/dst rectangle configuration for each pipe. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527329/ Link: https://lore.kernel.org/r/20230316161653.4106395-13-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: move stride programming to dpu_hw_sspp_setup_sourceaddressDmitry Baryshkov
Move stride programming to dpu_hw_sspp_setup_sourceaddress(), so that dpu_hw_sspp_setup_rects() programs only source and destination rectangles. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527330/ Link: https://lore.kernel.org/r/20230316161653.4106395-12-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: clean up SRC addresses when setting up SSPP for solid fillDmitry Baryshkov
Set SSPP_SRCn_ADDR registers to 0 while setting up solid fill, as we can not be sure that the previous address is still valid. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527324/ Link: https://lore.kernel.org/r/20230316161653.4106395-11-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: pass dpu_format to _dpu_hw_sspp_setup_scaler3()Dmitry Baryshkov
There is no need to pass full dpu_hw_sspp_cfg instance to _dpu_hw_sspp_setup_scaler3, pass just struct dpu_format pointer. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527328/ Link: https://lore.kernel.org/r/20230316161653.4106395-10-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: use dpu_sw_pipe for dpu_hw_sspp callbacksDmitry Baryshkov
Where feasible, use dpu_sw_pipe rather than a combo of dpu_hw_sspp and multirect_index/_mode arguments. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527333/ Link: https://lore.kernel.org/r/20230316161653.4106395-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: introduce struct dpu_sw_pipeDmitry Baryshkov
Wrap SSPP and multirect index/mode into a single structure that represents software view on the pipe used. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527326/ Link: https://lore.kernel.org/r/20230316161653.4106395-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: drop dpu_plane_pipe functionDmitry Baryshkov
There no more need for the dpu_plane_pipe() function, crtc code can access pstate->pipe_hw.idx directly. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527320/ Link: https://lore.kernel.org/r/20230316161653.4106395-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: move pipe_hw to dpu_plane_stateDmitry Baryshkov
In preparation to adding fully virtualized planes, move struct dpu_hw_sspp instance from struct dpu_plane to struct dpu_plane_state, as it will become a part of state (variable, changes during runtime) rather than part of a plane (ideally should be statically allocated during boot). The sspp pointer is set at the dpu_plane_reset(), since this is the function which allocates the state. Once we have fully virtual plane<->SSPP relationship, the SSPP will be allocated dynamically in the dpu_plane_atomic_check() function. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527322/ Link: https://lore.kernel.org/r/20230316161653.4106395-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: drop EAGAIN check from dpu_format_populate_layoutDmitry Baryshkov
The pipe's layout is not cached, corresponding data structure is zeroed out each time in the dpu_plane_sspp_atomic_update(), right before the call to _dpu_plane_set_scanout() -> dpu_format_populate_layout(). Drop plane_addr comparison against previous layout and corresponding EAGAIN handling. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527314/ Link: https://lore.kernel.org/r/20230316161653.4106395-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: move SSPP debugfs creation to dpu_kms.cDmitry Baryshkov
As SSPP blocks are now visible through dpu_kms->rm.sspp_blocks, move SSPP debugfs creation from dpu_plane to dpu_kms. We are going to break the 1:1 correspondence between planes and SSPPs, so it makes no sense anymore to create SSPP debugfs entries in dpu_plane.c Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527317/ Link: https://lore.kernel.org/r/20230316161653.4106395-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: move SSPP allocation to the RMDmitry Baryshkov
Follow the example of all other hw blocks and initialize SSPP blocks in Resource Manager. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527313/ Link: https://lore.kernel.org/r/20230316161653.4106395-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: rename struct dpu_hw_pipe(_cfg) to dpu_hw_sspp(_cfg)Dmitry Baryshkov
For all hardware blocks except SSPP the corresponding struct is named after the block. Rename dpu_hw_pipe (SSPP structure) to dpu_hw_sspp. Also rename struct dpu_hw_pipe_cfg to dpu_hw_sspp_cfg to follow this change. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527312/ Link: https://lore.kernel.org/r/20230316161653.4106395-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: Add support for AR30 formatLeonard Lausen
Commit da7716a249b699978fb5 ("drm/msm/dpu: Add support for XR30 format") enabled support for the 10-bit XR30 color format but missed enabling support for the corresponding per-pixel alpha-blending AR30 color format. Declaring only XR30 but not AR30 color format support can trigger bugs in userspace. KDE KWin compositor versions prior to 5.27.3 for example prefer 10-bit color formats, rendering a 1cm^2 black box around the cursor due to missing per-pixel alpha-blending. Signed-off-by: Leonard Lausen <leonard@lausen.nl> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180) Patchwork: https://patchwork.freedesktop.org/patch/527985/ Link: https://lore.kernel.org/r/6f33219dc848ccd7122bce6933338033aa18c33c@lausen.nl Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/disp/dpu1: add support for dspp sub block flush in sc7280Kalyan Thota
Flush mechanism for DSPP blocks has changed in sc7280 family, it allows individual sub blocks to be flushed in coordination with master flush control. Representation: master_flush && (PCC_flush | IGC_flush .. etc ) This change adds necessary support for the above design. Changes in v1: - Few nits (Doug, Dmitry) - Restrict sub-block flush programming to dpu_hw_ctl file (Dmitry) Changes in v2: - Move the address offset to flush macro (Dmitry) - Separate ops for the sub block flush (Dmitry) Changes in v3: - Reuse the DPU_DSPP_xx enum instead of a new one (Dmitry) Changes in v4: - Use shorter version for unsigned int (Stephen) Changes in v5: - Spurious patch please ignore. Changes in v6: - Add SOB tag (Doug, Dmitry) Changes in v7: - Cache flush mask per dspp (Dmitry) - Few nits (Marijn) Changes in v8: - Few nits (Marijn) Changes in v9: - Use DSPP enum while accessing flush mask to make it readable (Dmitry) - Few nits (Dmitry) Changes in v10: - Fix white spaces in a separate patch (Dmitry) Changes in v11: - Define a macro for dspp flush selection (Marijn) - Few nits (Marijn) Changes in v12: - Minor comments (reorder macros and a condition) (Marijn) Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> Tested-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/520701/ Link: https://lore.kernel.org/r/1674814487-2112-1-git-send-email-quic_kalyant@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06dt-bindings: display/msm: document DPU on SM8550Neil Armstrong
Document the DPU hardware found on the Qualcomm SM8550 platform. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/517511/ Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-2-660c3bcb127f@linaro.org [DB: removed interconnect header inclusion] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: Remove empty prepare_commit() functionJessica Zhang
Now that the TE setup has been moved to prepare_for_kickoff(), we have not prepare_commit() callbacks left. This makes dpu_encoder_prepare_commit() do nothing. Remove prepare_commit() from DPU driver. Changes in V3: - Reworded commit message to be more clear - Corrected spelling mistake in commit message Changes in V4: - Reworded commit message for clarity Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/523606/ Link: https://lore.kernel.org/r/20230221184256.1436-4-quic_jesszhan@quicinc.com [DB: fixed merge conflict] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/mdss: Fix spelling mistake "Unuspported" -> "Unsupported"Colin Ian King
There is a spelling mistake in a dev_error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/529400/ Link: https://lore.kernel.org/r/20230329093026.418847-1-colin.i.king@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dpu: Move TE setup to prepare_for_kickoff()Jessica Zhang
Currently, DPU will enable TE during prepare_commit(). However, this will cause a crash and reboot to sahara when trying to read/write to register in get_autorefresh_config(), because the core clock rates aren't set at that time. This used to work because phys_enc->hw_pp is only initialized in mode set [1], so the first prepare_commit() will return before any register read/write as hw_pp would be NULL. However, when we try to implement support for INTF TE, we will run into the clock issue described above as hw_intf will *not* be NULL on the first prepare_commit(). This is because the initialization of dpu_enc->hw_intf has been moved to dpu_encoder_setup() [2]. To avoid this issue, let's enable TE during prepare_for_kickoff() instead as the core clock rates are guaranteed to be set then. Depends on: "Implement tearcheck support on INTF block" [3] Changes in V3: - Added function prototypes - Reordered function definitions to make change more legible - Removed prepare_commit() function from dpu_encoder_phys_cmd Changes in V4: - Reworded commit message to be more specific - Removed dpu_encoder_phys_cmd_is_ongoing_pptx() prototype [1] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L1109 [2] https://gitlab.freedesktop.org/drm/msm/-/blob/msm-next/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c#L2339 [3] https://patchwork.freedesktop.org/series/112332/ Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/523602/ Link: https://lore.kernel.org/r/20230221184256.1436-2-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Implement fbdev emulation as in-kernel clientThomas Zimmermann
Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to msm_fbdev_setup() after msm has registered its DRM device. As in most drivers, msm's fbdev emulation now acts like a regular DRM client. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_dev_unregister() releases the client automatically. No further action is required within msm. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. v2: * handle fbdev module parameter correctly (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # RB5 Patchwork: https://patchwork.freedesktop.org/patch/530560/ Link: https://lore.kernel.org/r/20230403124538.8497-9-tzimmermann@suse.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Initialize fbdev DRM clientThomas Zimmermann
Initialize the fbdev client in the fbdev code with empty helper functions. Also clean up the client. The helpers will later implement various functionality of the DRM client. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530557/ Link: https://lore.kernel.org/r/20230403124538.8497-8-tzimmermann@suse.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Move module parameter 'fbdev' to fbdev codeThomas Zimmermann
Define the module's parameter 'fbdev' in fbdev code. No other code uses it. No functional changes, but simplifies the later conversion to struct drm_client. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530555/ Link: https://lore.kernel.org/r/20230403124538.8497-7-tzimmermann@suse.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Remove fbdev from struct msm_drm_privateThomas Zimmermann
The DRM device stores a pointer to the fbdev helper. Remove struct msm_drm_private.fbdev, which contains the same value. No functional changes. v2: * test for fb_helper->fb in debugfs code Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530559/ Link: https://lore.kernel.org/r/20230403124538.8497-6-tzimmermann@suse.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Remove struct msm_fbdevThomas Zimmermann
Remove struct msm_fbdev, which is an empty wrapper around struct drm_fb_helper. Use the latter directly. No functional changes. v2: * kfree fbdev helper instance on init errors (Dmitri) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530554/ Link: https://lore.kernel.org/r/20230403124538.8497-5-tzimmermann@suse.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Remove fb from struct msm_fbdevThomas Zimmermann
Fbdev's struct fb_helper stores a pointer to the framebuffer. Remove struct msm_fbdev.fb, which contains thre same value. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530552/ Link: https://lore.kernel.org/r/20230403124538.8497-4-tzimmermann@suse.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Clear aperture ownership outside of fbdev codeThomas Zimmermann
Move aperture management out of the fbdev code. It is unrelated and needs to run even if fbdev support has been disabled. Call the helper at the top of msm_drm_init() to take over hardware from other drivers. v2: * bind all subdevices before acquiring device (Dmitri) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530553/ Link: https://lore.kernel.org/r/20230403124538.8497-3-tzimmermann@suse.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Include <linux/io.h>Thomas Zimmermann
Include <linux/io.h> to get the declaration of devm_ioremap() on sparc64. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303301856.zSmpwZjj-lkp@intel.com/ Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/530550/ Link: https://lore.kernel.org/r/20230403124538.8497-2-tzimmermann@suse.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Avoid rounding down to zero jiffiesRob Clark
If userspace asked for a timeout greater than zero, but less than a jiffy, they clearly weren't planning on spinning. So it is better to round up to one. This fixes an issue with supertuxkart that was (for some reason) spinning on a gl sync with 1ms timeout. CPU time for a demo lap drops from: 15.83user 20.98system 0:47.46elapsed 77%CPU drops to: 8.84user 2.30system 0:46.67elapsed 23%CPU Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/528725/ Link: https://lore.kernel.org/r/20230324220013.191795-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Rename drm_msm_gem_submit_reloc::or in C++ codeDanylo Piliaiev
Clashes with C++ `or` keyword Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/528751/ Link: https://lore.kernel.org/r/20230326163813.535762-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06dt-bindings: display: msm: sm8450-mdss: Fix DSI compatibleNeil Armstrong
The DSI compatible changed between patchset revisions, but that wasn't reflected in the bindings. Fix it. Fixes: 0eda3c6cb1c5 ("dt-bindings: display/msm: add support for the display on SM8450") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/528589/ Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-1-0ca1bea1a843@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Use drm_sched_job_add_syncobj_dependency()Maíra Canal
As msm_parse_deps() performs the same steps as drm_sched_job_add_syncobj_dependency(), replace the open-coded implementation in msm in order to simply use the DRM function. Signed-off-by: Maíra Canal <mcanal@igalia.com> Patchwork: https://patchwork.freedesktop.org/patch/524090/ Link: https://lore.kernel.org/r/20230224214133.411966-2-mcanal@igalia.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: move include directiveJohan Hovold
Move the include of of_address.h to the top of the file where it belongs. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525105/ Link: https://lore.kernel.org/r/20230306100722.28485-11-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: fix workqueue leak on bind errorsJohan Hovold
Make sure to destroy the workqueue also in case of early errors during bind (e.g. a subcomponent failing to bind). Since commit c3b790ea07a1 ("drm: Manage drm_mode_config_init with drmm_") the mode config will be freed when the drm device is released also when using the legacy interface, but add an explicit cleanup for consistency and to facilitate backporting. Fixes: 060530f1ea67 ("drm/msm: use componentised device support") Cc: stable@vger.kernel.org # 3.15 Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525093/ Link: https://lore.kernel.org/r/20230306100722.28485-9-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: fix missing wq allocation error handlingJohan Hovold
Add the missing sanity check to handle workqueue allocation failures. Fixes: c8afe684c95c ("drm/msm: basic KMS driver for snapdragon") Cc: stable@vger.kernel.org # 3.12 Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525102/ Link: https://lore.kernel.org/r/20230306100722.28485-8-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: fix vram leak on bind errorsJohan Hovold
Make sure to release the VRAM buffer also in a case a subcomponent fails to bind. Fixes: d863f0c7b536 ("drm/msm: Call msm_init_vram before binding the gpu") Cc: stable@vger.kernel.org # 5.11 Cc: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525094/ Link: https://lore.kernel.org/r/20230306100722.28485-7-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: fix drm device leak on bind errorsJohan Hovold
Make sure to free the DRM device also in case of early errors during bind(). Fixes: 2027e5b3413d ("drm/msm: Initialize MDSS irq domain at probe time") Cc: stable@vger.kernel.org # 5.17 Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525097/ Link: https://lore.kernel.org/r/20230306100722.28485-6-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: fix NULL-deref on irq uninstallJohan Hovold
In case of early initialisation errors and on platforms that do not use the DPU controller, the deinitilisation code can be called with the kms pointer set to NULL. Fixes: f026e431cf86 ("drm/msm: Convert to Linux IRQ interfaces") Cc: stable@vger.kernel.org # 5.14 Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525104/ Link: https://lore.kernel.org/r/20230306100722.28485-5-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: fix NULL-deref on snapshot tear downJohan Hovold
In case of early initialisation errors and on platforms that do not use the DPU controller, the deinitilisation code can be called with the kms pointer set to NULL. Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Cc: stable@vger.kernel.org # 5.14 Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525099/ Link: https://lore.kernel.org/r/20230306100722.28485-4-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06Revert "drm/msm: Fix failure paths in msm_drm_init()"Johan Hovold
This reverts commit 8636500300a01740d92b345c680b036b94555b1b. A recent commit tried to address a drm device leak in the early msm_drm_uninit() error paths but ended up making things worse. Specifically, it moved the drm device reference put in msm_drm_uninit() to msm_drm_init() which means that the drm would now be leaked on normal unbind. For reasons that were never spelled out, it also added kms NULL pointer checks to a couple of helper functions that had nothing to do with the paths modified by the patch. Instead of trying to salvage this incrementally, let's revert the bad commit so that clean and backportable fixes can be added in its place. Fixes: 8636500300a0 ("drm/msm: Fix failure paths in msm_drm_init()") Cc: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525092/ Link: https://lore.kernel.org/r/20230306100722.28485-3-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06Revert "drm/msm: Add missing check and destroy for alloc_ordered_workqueue"Johan Hovold
This reverts commit 643b7d0869cc7f1f7a5ac7ca6bd25d88f54e31d0. A recent patch that tried to fix up the msm_drm_init() paths with respect to the workqueue but only ended up making things worse: First, the newly added calls to msm_drm_uninit() on early errors would trigger NULL-pointer dereferences, for example, as the kms pointer would not have been initialised. (Note that these paths were also modified by a second broken error handling patch which in effect cancelled out this part when merged.) Second, the newly added allocation sanity check would still leak the previously allocated drm device. Instead of trying to salvage what was badly broken (and clearly not tested), let's revert the bad commit so that clean and backportable fixes can be added in its place. Fixes: 643b7d0869cc ("drm/msm: Add missing check and destroy for alloc_ordered_workqueue") Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/525107/ Link: https://lore.kernel.org/r/20230306100722.28485-2-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/mdss: add the sdm845 data for completenessDmitry Baryshkov
Add the platform data for sdm845 platform. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/518783/ Link: https://lore.kernel.org/r/20230118010428.1671443-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/mdss: add data for sc8180xpDmitry Baryshkov
Add platform data for sc8180xp based on sdmshrike-sde.dtsi. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/518782/ Link: https://lore.kernel.org/r/20230118010428.1671443-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/mdss: convert UBWC setup to use match dataDmitry Baryshkov
To simplify adding new platforms and to make settings more obvious, rewrite the UBWC setup to use the data structure to pass platform config rather than just calling the functions direcly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/518781/ Link: https://lore.kernel.org/r/20230118010428.1671443-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06dt-bindings: display/msm: document MDSS on SM8550Neil Armstrong
Document the MDSS hardware found on the Qualcomm SM8550 platform. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/517513/ Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-3-660c3bcb127f@linaro.org [DB: Fixed the schema to follow changes since the patch was posted] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm: Check for NULL before calling prepare_commit()Jessica Zhang
Add a NULL check before calling prepare_commit() in msm_atomic_commit_tail() Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/523604/ Link: https://lore.kernel.org/r/20230221184256.1436-3-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06dt-bindings: bridge: Convert Samsung MIPI DSIM bridge to yamlJagan Teki
Samsung MIPI DSIM bridge can be found on Exynos and NXP's i.MX8M Mini/Nano/Plus SoCs. Convert exynos_dsim.txt to yaml. Used the example node from exynos5433.dtsi instead of the one used in the legacy exynos_dsim.txt. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230404023057.510329-1-festevam@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 09:42:11 +0000