summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-07usb: gadget: remove unused variable in gr_queue_int()Wei Yongjun
The variable 'dev' is initialized but never used otherwise, so remove the unused variable. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: gadget: s3c-hsotg: remove duplicated include from s3c-hsotg.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: ftdi_sio: added CS5 quirk for broken smartcard readersColin Leitner
Genuine FTDI chips support only CS7/8. A previous fix in commit 8704211f65a2 ("USB: ftdi_sio: fixed handling of unsupported CSIZE setting") enforced this limitation and reported it back to userspace. However, certain types of smartcard readers depend on specific driver behaviour that requests 0 data bits (not 5) to change into a different operating mode if CS5 has been set. This patch reenables this behaviour for all FTDI devices. Tagged to be added to stable, because it affects a lot of users of embedded systems which rely on these readers to work properly. Cc: stable <stable@vger.kernel.org> Reported-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Tested-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28Peter Chen
Due to imx28 needs ARM swp instruction for writing, we set CI_HDRC_IMX28_WRITE_FIX for imx28. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: doc: rename ci13xxx-imx.txt to ci-hdrc-imx.txtPeter Chen
We have already renamed the file name, change doc name at this patch. Cc: devicetree@vger.kernel.org Cc: linux-doc@vger.kernel.org Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: chipidea: mark register map as "const" and convert to u8Marc Kleine-Budde
This patch makes the controller register map ci_regs_nolpm and ci_regs_lpm as "const". Further, as all offset fit into a single byte, the type is changed from uintptr_t to u8. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: chipidea: move malloced regmap directly into struct hw_bankMarc Kleine-Budde
Without this patch a seperate chunk of memory is allocated for the regmap array. As the regmap is always used it makes no sense to allocate a seperate memory block for it, this patch moves the regmap array directly into the struct hw_bank. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up coding style issues in wa-nep.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up coding style issues in wa-rpipe.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up coding style issues in wusbhc.c and wusbhc.hRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up line break coding style issues in mmc.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up line break coding style issues in security.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up line break coding style issues in wa-hc.hRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up minor coding style issues in cbaf.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: correct spelling mistakes in comments and error stringRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: core: correct spelling mistakes in comments and warningRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07Watchdog: pcwd_usb: remove CONFIG_USB_DEBUG usageGreg Kroah-Hartman
CONFIG_USB_DEBUG is going away, and all of the other USB drivers no longer rely on "debug" module parameters for debugging lines, so move the pcwd_usb driver to use the dynamic debug infrastructure to be more in line with the rest of the kernel. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2014-01-07USB: c67x00: move URB private data allocation from under spinlockMax Filippov
This fixes the following warning: BUG: sleeping function called from invalid context at mm/slub.c:940 in_atomic(): 1, irqs_disabled(): 1, pid: 17, name: khubd CPU: 0 PID: 17 Comm: khubd Not tainted 3.12.0-00004-g938dd60-dirty #1 __might_sleep+0xbe/0xc0 kmem_cache_alloc_trace+0x36/0x170 c67x00_urb_enqueue+0x5c/0x254 usb_hcd_submit_urb+0x66e/0x724 usb_submit_urb+0x2ac/0x308 usb_start_wait_urb+0x2c/0xb8 usb_control_msg+0x8c/0xa8 hub_port_init+0x191/0x718 hub_thread+0x804/0xe14 kthread+0x72/0x78 ret_from_kernel_thread+0x8/0xc Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: c67x00: add proper delays to HPI read/writeMax Filippov
According to CY7C67300 specification HPI read and write cycle duration Tcyc must be at least 6T long, where T is 1/48MHz, which is 125ns. Without this delay fast host processor cannot write to chip registers. Add proper ndelay to hpi_{read,write}_reg. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: fix race between hub_disconnect and recursively_mark_NOTATTACHEDAlan Stern
There is a race in the hub driver between hub_disconnect() and recursively_mark_NOTATTACHED(). This race can be triggered if the driver is unbound from a device at the same time as the bus's root hub is removed. When the race occurs, it can cause an oops: BUG: unable to handle kernel NULL pointer dereference at 0000015c IP: [<c16d5fb0>] recursively_mark_NOTATTACHED+0x20/0x60 Call Trace: [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d6082>] usb_set_device_state+0x92/0x120 [<c16d862b>] usb_disconnect+0x2b/0x1a0 [<c16dd4c0>] usb_remove_hcd+0xb0/0x160 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50 [<c1704efc>] ehci_mid_remove+0x1c/0x30 [<c1704f26>] ehci_mid_stop_host+0x16/0x30 [<c16f7698>] penwell_otg_work+0xd28/0x3520 [<c19c945b>] ? __schedule+0x39b/0x7f0 [<c19cdb9d>] ? sub_preempt_count+0x3d/0x50 [<c125e97d>] process_one_work+0x11d/0x3d0 [<c19c7f4d>] ? mutex_unlock+0xd/0x10 [<c125e0e5>] ? manage_workers.isra.24+0x1b5/0x270 [<c125f009>] worker_thread+0xf9/0x320 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50 [<c125ef10>] ? rescuer_thread+0x2b0/0x2b0 [<c1264ac4>] kthread+0x94/0xa0 [<c19d0f77>] ret_from_kernel_thread+0x1b/0x28 [<c1264a30>] ? kthread_create_on_node+0xc0/0xc0 One problem is that recursively_mark_NOTATTACHED() uses the intfdata value and hub->hdev->maxchild while hub_disconnect() is clearing them. Another problem is that it uses hub->ports[i] while the port device is being released. To fix this race, we need to hold the device_state_lock while hub_disconnect() changes the values. (Note that usb_disconnect() and hub_port_connect_change() already acquire this lock at similar critical times during a USB device's life cycle.) We also need to remove the port devices after maxchild has been set to 0, instead of before. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: "Du, Changbin" <changbinx.du@intel.com> Tested-by: "Du, Changbin" <changbinx.du@intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: fix: ohci-at91 mismerge build errorArnd Bergmann
After commit 99f14bd4d1 "Merge 3.13-rc5 into usb-next" (in linux-next as of today), I'm getting this error building any at91 kernel: drivers/usb/host/ohci-at91.c: In function 'usb_hcd_at91_probe': drivers/usb/host/ohci-at91.c:190:4: error: label 'err' used but not defined goto err; ^ drivers/usb/host/ohci-at91.c: At top level: drivers/usb/host/ohci-at91.c:206:2: warning: data definition has no type or storage class [enabled by default] at91_stop_hc(pdev); ^ ... The problem is obviously a mismerge between two unrelated changes that resulted in missing opening braces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: oti6858: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: oti6858: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: clean up interrupt handlerJohan Hovold
Clean up interrupt completion handler somewhat. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: fix ignored TIOCMIWAIT maskJohan Hovold
Make sure the TIOCMIWAIT mask is always honoured. The CH341 interrupt status has a multiple-status changed flag which indicates that multiple status changes has occurred since last interrupt event. Unfortunately, if the final status is the same, there appears to be no way to determine which signal(s) has changed (an even number of times). This means that the multiple-status flag should not be used in TIOCMIWAIT as it leads to the signal mask argument being ignored (e.g. TIOCMIWAIT could return if DSR changes twice, even though the user only cares about carrier changes). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: clean up line-status handlingJohan Hovold
Clean up line-status handling. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: refactor line-status handlingJohan Hovold
Refactor line-status handling. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: clean up protocol definitionsJohan Hovold
Clean up protocol definitions. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: fix ring-indicator detection and reportingJohan Hovold
Fix ring-indicator (RI) status-bit definition, which was defined as CTS, effectively preventing RI-changes from being detected while reporting false RI status. This bug predates git. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: clean up line-status handlingJohan Hovold
Clean up line-status handling somewhat. Get tty-reference only when actually needed. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: make type data constJohan Hovold
Declare constant device-type data as const. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: Nokia 502 is an unusual deviceMikhail Zolotaryov
The USB storage operation of Nokia Asha 502 Dual SIM smartphone running Asha Platform 1.1.1 is unreliable in respect of data consistency (i.e. transfered files are corrupted). A similar issue is described here: http://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/Nokia-301-USB-transfers-and-corrupted-files/td-p/1974170 The workaround is (MAX_SECTORS_64): rmmod usb_storage && modprobe usb_storage quirks=0421:06aa:m The patch adds the tested device to the unusual list permanently. Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: add support for iBall 3.5G connect usb modemRahul Bedarkar
Add support for iBall 3.5G connect usb modem. $lsusb Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY $usb-devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9605 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: correct spelling mistakes in commentsRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: musb: correct spelling mistakes in comment and error stringRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: misc: idmouse: correct spelling mistake in error stringRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: yurex: fix spelling mistake in commentRahul Bedarkar
fix spelling mistake in comment Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: chipidea: add guard macro to ci_hdrc_imx.hRahul Bedarkar
Add guard macro to driver/usb/chipidea/ci_hdrc_imx.h Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03usb: ehci: Cleanup usb-ehci-orion.h headerSachin Kamat
Commit c02cecb92ed4 ("ARM: orion: move platform_data definitions") moved the file to the current location but forgot to remove the pointer to its previous location. Clean it up. While at it also change the header file protection macros appropriately. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: iowarrior: fix spelling mistake in commentRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: use C_CMSPAR macroJohan Hovold
Use the new C_CMSPAR macro for consistency. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: add Moxa UPORT 12XX/14XX/16XX driverAndrew Lunn
Add a driver which supports the following Moxa USB to serial converters: * 2 ports : UPort 1250, UPort 1250I * 4 ports : UPort 1410, UPort 1450, UPort 1450I * 8 ports : UPort 1610-8, UPort 1650-8 * 16 ports : UPort 1610-16, UPort 1650-16 The UPORT devices don't directly fit the USB serial model. USB serial assumes a bulk in/out endpoint pair per serial port. Thus a dual port USB serial device is expected to have two bulk in/out pairs. The Moxa UPORT only has one pair for data transfer and places a header on each transfer over the endpoint indicating for which port the transfer relates to. There is a second endpoint pair for events, such as modem control lines changing state, setting baud rates etc. Again, a multiplexing header is used on these endpoints. Some ports need to have a kfifo explicitly allocated since the framework does not allocate one if there is no associated endpoints. The framework will however free it on unload of the module. All data transfers are made on port0, yet the locks are taken on PortN. urb->context points to PortN, even though the URB is for port0. Where possible, code from the generic driver is called. However mxuport_process_read_urb_data() is mostly a cut/paste of usb_serial_generic_process_read_urb(). The driver will attempt to load firmware from userspace and compare the available version and the running version. If the available version is newer, it will be download into RAM of the device and started. This is optional and the driver appears to work O.K. with older firmware in the devices ROM. This driver is based on the MOXA driver and retains MOXAs copyright. [jhovold@gmail.com: fix get_fw_version error path and some style issues] Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03tty: Add C_CMSPAR(tty)Andrew Lunn
Add the missing C_CMSPAR(tty) macro. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: use direct baud-rate encoding when possibleJohan Hovold
Use direct baud-rate encoding rather than divisors for supported baud rates. This restores the way baud rates were set prior to commit 8d48fdf689fe ("USB: PL2303: correctly handle baudrates above 115200") which added divisor encoding, but also switched to the new encoding method for all baudrates above 115200. As noted by Frank Schäfer <fschaefer.oss@googlemail.com>, baud rate 500k was later errounously added to the supported baud-rate table although it can only be set using divisors. Note that the current implementation could easily be extended to support arbitrary non-standard baud rates using divisors (e.g. by falling back to divisors when the table lookup fails). Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-16 02:39:31 +0000