summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-07ARC: [mm] consolidate icache/dcache sync codeVineet Gupta
Now that we have same helper used for all icache invalidates (i.e. vaddr+paddr based exact line invalidate), consolidate the open coded calls into one place. Also rename flush_icache_range_vaddr => __sync_icache_dcache Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: [mm] optimise icache flush for kernel mappingsVineet Gupta
This change continues the theme from prev commit - this time icache handling for kernel's own code modification (vmalloc: loadable modules, breakpoints for kprobes/kgdb...) flush_icache_range() calls the CDU icache helper with vaddr to enable exact line invalidate. For a true kernel-virtual mapping, the vaddr is actually virtual hence valid as index into cache. For kprobes breakpoint however, the vaddr arg is actually paddr - since that's how normal kernel is mapped in ARC memory map. This implies that CDU will use the same addr for indexing as for tag match - which is fine since kernel code would only have that "implicit" mapping and none other. This should speed up module loading significantly - specially on default ARC700 icache configurations (32k) which alias. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: [mm] optimise icache flush for user mappingsVineet Gupta
ARC icache doesn't snoop dcache thus executable pages need to be made coherent before mapping into userspace in flush_icache_page(). However ARC700 CDU (hardware cache flush module) requires both vaddr (index in cache) as well as paddr (tag match) to correctly identify a line in the VIPT cache. A typical ARC700 SoC has aliasing icache, thus the paddr only based flush_icache_page() API couldn't be implemented efficiently. It had to loop thru all possible alias indexes and perform the invalidate operation (ofcourse the cache op would only succeed at the index(es) where tag matches - typically only 1, but the cost of visiting all the cache-bins needs to paid nevertheless). Turns out however that the vaddr (along with paddr) is available in update_mmu_cache() hence better suits ARC icache flush semantics. With both vaddr+paddr, exactly one flush operation per line is done. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07Merge tag 'omap-for-v3.10/fixes-for-merge-window' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/cleanup From Tony Lindgren <tony@atomide.com>: An urgent fix for a timer mismerge for and a regression fix for musb device naming change. * tag 'omap-for-v3.10/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-07ARC: [mm] optimize needless full mm TLB flush on munmapVineet Gupta
munmap ends up calling tlb_flush() which for ARC was flushing the entire TLB unconditionally (by moving the MMU to a new ASID) do_munmap unmap_region unmap_vmas unmap_single_vma unmap_page_range tlb_start_vma zap_pud_range tlb_end_vma() tlb_finish_mmu tlb_flush() ---> unconditional flush_tlb_mm() So even a single page munmap, a frequent operation when uClibc dynamic linker (ldso) is loading the dependent shared libraries, would move the the ASID multiple times - needlessly invalidating the pre-faulted TLB entries (and increasing the rate of ASID wraparound + full TLB flush). This is now optimised to only be called if tlb->full_mm (which means for exit/execve) cases only. And for those cases, flush_tlb_mm() is already optimised to be a no-op for mm->mm_users == 0. So essentially there are no mmore full mm flushes - except for fork which anyhow needs it for properly COW'ing parent address space. munmap now needs to do TLB range flush, which is implemented with tlb_end_vma() Results ------- 1. ASID now consistenly moves by 4 during a simple ls (as opposed to 5 or 7 before). 2. LMBench microbenchmark also shows improvements Basic system parameters ------------------------------------------------------------------------------ Host OS Description Mhz tlb cache mem scal pages line par load bytes --------- ------------- ----------------------- ---- ----- ----- ------ ---- 3.9-rc5-0 Linux 3.9.0-r 3.9-rc5-0404-gcc-4.4-ba 80 8 64 1.1000 1 3.9-rc5-0 Linux 3.9.0-r 3.9-rc5-0405-avoid-full 80 8 64 1.1200 1 Processor, Processes - times in microseconds - smaller is better ------------------------------------------------------------------------------ Host OS Mhz null null open slct sig sig fork exec sh call I/O stat clos TCP inst hndl proc proc proc --------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 3.9-rc5-0 Linux 3.9.0-r 80 4.81 8.69 68.6 118. 239. 8.53 31.6 4839 13.K 34.K 3.9-rc5-0 Linux 3.9.0-r 80 4.46 8.36 53.8 91.3 223. 8.12 24.2 4725 13.K 33.K File & VM system latencies in microseconds - smaller is better ------------------------------------------------------------------------------- Host OS 0K File 10K File Mmap Prot Page 100fd Create Delete Create Delete Latency Fault Fault selct --------- ------------- ------ ------ ------ ------ ------- ----- ------- ----- 3.9-rc5-0 Linux 3.9.0-r 314.7 223.2 1054.9 390.2 3615.0 1.590 20.1 126.6 3.9-rc5-0 Linux 3.9.0-r 265.8 183.8 1014.2 314.1 3193.0 6.910 18.8 110.4 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: Add support for nSIM OSCI System C modelMischa Jonker
This adds support for an ARC Virtual Platform. This platform is based on the System C standard promoted by the OSCI (Open System C Initiative) and uses nSIM to simulate the ARC CPU core itself. Users can build a virtual SoC by combining System C models of peripherals and CPU cores. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: [TB10x] Adapt device tree to new compatible stringChristian Ruppert
The original device tree was written using a slightly different implementation of the fixed-factor-clock device tree binding. The compatible string must be modified in order to be compatible with the new implementation. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: [TB10x] Add support for TB10x platformChristian Ruppert
Infrastructure required to make the Linux kernel compile and boot on the Abilis Systems TB10x series of SOCs based on ARC700 CPUs: - Kmake related files (Kconfig, Makefile, tb10x_defconfig) - TB10x platform initialisation Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: [TB10x] Device tree of TB100 and TB101 Development KitsChristian Ruppert
These are the device tree files for the Abilis Systems TB100 and TB101 ICs and their respective development kit PCBs. These files are committed in preparation of the following patch set which adds support for these chips to the ARC platform. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: Prepare interrupt code for external controllersChristian Ruppert
This patch adds some room for CPU-external interrupt controllers in the Linux interrupt space. Until now, only the 32 CPU internal interrupt lines were supported which does not allow for external interrupt controllers such as GPIO modules etc. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchyVineet Gupta
arc-intc is initialized in arc common code as it is applicable to all platforms. However platforms with their own external intc still need to refer to it for correct DT interrupt tree hierarchy setup, e.g. static struct of_device_id __initdata tb10x_irq_ids[] = { { .compatible = "snps,arc700-intc", .data = dummy_init_irq }, { .compatible = "abilis,tb10x_ictl", .data = tb10x_init_irq }, {}, }; The fix is to use the generic irqchip framework to tie all irqchips in a special linker section and then call irqchip_init() which calls the DT of_irq_init() for all the intc in one go. That way the platform code need not be aware of arc-intc at all. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: [cmdline] Don't overwrite u-boot provided bootargsVineet Gupta
The existing code was wrong on several counts: * uboot provided bootargs were copied into @boot_command_line, only to be over-written by setup_machine_fdt(), effectively lost * @cmdline_p returned by setup_arch() to start_kernel() didn't include the DT /bootargs Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: [cmdline] Remove CONFIG_CMDLINEVineet Gupta
Given that DeviceTree /bootargs can provide similar functionality, no point in providing duplicate infrastructure. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: [plat-arcfpga] defconfig updateVineet Gupta
* Allow initramfs path to be symlink * CONFIG_PREEMPT be default Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: unaligned access emulation broken if callee-reg dest of LD/STVineet Gupta
The fixup code correctly updates the callee-regs on stack, but fails to unwind it into actual register file. Thus userspace won't see the update. Reported-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: unaligned access emulation error handling consolidationVineet Gupta
If CONFIG_ARC_MISALIGN_ACCESS is not enabled, or if the fixup fails, call the same error handler: same signal/si_code to user (SIGBUS) Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: Debug/crash-printing ImprovementsVineet Gupta
* Remove the line-break between scratch/callee-regs (sneaked in when we converted from printk to pr_* * Use %pS to print the symbol names of faulting PC (ret pseudo register) and BLINK (call return register) * Don't print user-vma for a kernel crash (only do it for print-fatal-signals based regfile dump) * Verbose print the Interrupt/Exception Enable/Active state * for main executable link address is 0x10000 based (vs. 0) thus offset of faulting PC needs to be adjusted Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: fix typo with clock speedNoam Camus
Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: Respect the cpu_id passed for fetching correct cpu infoNoam Camus
Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07ARC: Remove non existent refs to GENERIC_KERNEL_EXECVE & GENERIC_KERNEL_THREADAlexander Shiyan
This tracks mainline commit ae903caae267 "Bury the conditionals from kernel_thread/kernel_execve series" which we missed out as ARC port was not yet mainline. [vgupta: commit log modified] Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07vhost-scsi: Enable VIRTIO_RING_F_EVENT_IDXAsias He
It was disabled as a workaround. Now userspace bits work fine with it. The broken version was not ever committed to QEMU, I guess the same is true for nlkt. So, let's enable it. Signed-off-by: Asias He <asias@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-05-07powerpc: Make hard_irq_disable() do the right thing vs. irq tracingBenjamin Herrenschmidt
If hard_irq_disable() is called while interrupts are already soft-disabled (which is the most common case) all is already well. However you can (and in some cases want) to call it while everything is enabled (to make sure you don't get a lazy even, for example before entry into KVM guests) and in this case we need to inform the irq tracer that the irqs are going off. We have to change the inline into a macro to avoid an include circular dependency hell hole. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-07Merge branch 'slab/next' into slab/for-linusPekka Enberg
2013-05-07make blkdev_put() return voidAl Viro
same story as with the previous patches - note that return value of blkdev_close() is lost, since there's nowhere the caller (__fput()) could return it to. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-07block_device_operations->release() should return voidAl Viro
The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-06ARM: OMAP4: change the device names in usb_bind_phyKishon Vijay Abraham I
After the device names are created using PLATFORM_DEVID_AUTO, the old device names given in usb_bind_phy are no longer valid causing the musb controller not to get the phy reference. Updated the usb_bind_phy with the new device names to get MUSB functional in omap4 panda. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-06ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686aVaibhav Hiremath
Looks like the timer.c fixes in commit ff931c82 (ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized) got lost in a merge with da4a686a (ARM: smp_twd: convert to use CLKSRC_OF init). Without the omap_clk_init() calls none of OMAP family of devices boot. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> [tony@atomide.com: updated comments to describe merge error] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Just a small pile of fixes" 1) Fix race conditions in IP fragmentation LRU list handling, from Konstantin Khlebnikov. 2) vfree() is no longer verboten in interrupts, so deferring is pointless, from Al Viro. 3) Conversion from mutex to semaphore in netpoll left trylock test inverted, caught by Dan Carpenter. 4) 3c59x uses wrong base address when releasing regions, from Sergei Shtylyov. 5) Bounds checking in TIPC from Dan Carpenter. 6) Fastopen cookies should not be expired as aggressively as other TCP metrics. From Eric Dumazet. 7) Fix retrieval of MAC address in ibmveth, from Ben Herrenschmidt. 8) Don't use "u16" in virtio user headers, from Stephen Hemminger * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tipc: potential divide by zero in tipc_link_recv_fragment() tipc: add a bounds check in link_recv_changeover_msg() net/usb: new driver for RTL8152 3c59x: fix freeing nonexistent resource on driver unload netpoll: inverted down_trylock() test rps_dev_flow_table_release(): no need to delay vfree() fib_trie: no need to delay vfree() net: frag, fix race conditions in LRU list maintenance tcp: do not expire TCP fastopen cookies net/eth/ibmveth: Fixup retrieval of MAC address virtio: don't expose u16 in userspace api
2013-05-06Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem updates from Bryan Wu: - move LED trigger drivers into a new directory - lp55xx common driver updates - other led drivers updates and bug fixing * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS leds: leds-bd2802: add CONFIG_PM_SLEEP to suspend/resume functions leds: lp55xx: configure the clock detection leds: lp55xx: use common clock framework when external clock is used leds: leds-ns2: fix oops at module removal leds: leds-pwm: Defer led_pwm_set() if PWM can sleep leds: lp55xx: fix the sysfs read operation leds: lm355x, lm3642: support camera LED triggers for flash and torch leds: add camera LED triggers leds: trigger: use inline functions instead of macros leds: tca6507: Use of_match_ptr() macro leds: wm8350: Complain if we fail to reenable DCDC leds: renesas: set gpio_request_one() flags param correctly leds: leds-ns2: set devm_gpio_request_one() flags param correctly leds: leds-lt3593: set devm_gpio_request_one() flags param correctly leds: leds-bd2802: remove erroneous __exit annotation leds: atmel-pwm: remove erroneous __exit annotation leds: move LED trigger drivers into new subdirectory leds: add new LP5562 LED driver
2013-05-06Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull GPIO changes from Grant Likely: "The usual selection of bug fixes and driver updates for GPIO. Nothing really stands out except the addition of the GRGPIO driver and some enhacements to ACPI support" I'm pulling this despite the earlier mess. Let's hope it compiles these days. * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits) gpio: grgpio: Add irq support gpio: grgpio: Add device driver for GRGPIO cores gpiolib-acpi: introduce acpi_get_gpio_by_index() helper GPIO: gpio-generic: remove kfree() from bgpio_remove call gpio / ACPI: Handle ACPI events in accordance with the spec gpio: lpc32xx: Fix off-by-one valid range checking for bank gpio: mcp23s08: convert driver to DT gpio/omap: force restore if context loss is not detectable gpio/omap: optimise interrupt service routine gpio/omap: remove extra context restores in *_runtime_resume() gpio/omap: free irq domain in probe() failure paths gpio: gpio-generic: Add 16 and 32 bit big endian byte order support gpio: samsung: Add terminating entry for exynos_pinctrl_ids gpio: mvebu: add dbg_show function MAX7301 GPIO: Do not force SPI speed when using OF Platform gpio: gpio-tps65910.c: fix checkpatch error gpio: gpio-timberdale.c: fix checkpatch error gpio: gpio-tc3589x.c: fix checkpatch errors gpio: gpio-stp-xway.c: fix checkpatch error gpio: gpio-sch.c: fix checkpatch error ...
2013-05-06Merge tag 'for-3.10-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull pwm changes from Thierry Reding: "Nothing very exciting this time around. A couple of bug fixes and a lot of cleanup across the board. The DaVinci 8xx family of SoCs now use the same driver as the AM33xx family. Many thanks to Axel Lin and Jingoo Han who have done a great job fixing various bugs and inconsistencies." * tag 'for-3.10-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (27 commits) pwm: lpc32xx: Don't change PWM_ENABLE bit in lpc32xx_pwm_config pwm: lpc32xx: Properly set PWM_ENABLE bit in lpc32xx_pwm_[enable|disable] pwm: Constify OF match tables pwm: pwm-tiehrpwm: Update device-tree binding document pwm: pwm-tiecap: Update device-tree binding document pwm: puv3: Remove unused enabled filed from struct puv3_pwm_chip pwm: pxa: Remove PWM_ID_BASE macro pwm: spear: Remove unused *dev from struct spear_pwm_chip pwm: mxs: Remove unused *dev from struct mxs_pwm_chip pwm: twl: Return proper error if twl6030_pwm_enable() fails pwm: pxa: Remove clk_enabled field from struct pxa_pwm_chip pwm: imx: Remove enabled field from struct imx_chip pwm: twl: Add .owner to struct pwm_ops pwm: twl-led: Add .owner to struct pwm_ops pwm: atmel-tcb: Add .owner to struct pwm_ops pwm: ab8500: Add .owner to struct pwm_ops pwm: spear: Fix checking return value of clk_enable() and clk_prepare() pwm: tiehrpwm: Staticize non-exported symbols pwm: tiecap: Staticize non-exported symbols pwm: ab8500: Fix trivial typo in dev_err message ...
2013-05-06Merge tag 'iommu-updates-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "The updates are mostly about the x86 IOMMUs this time. Exceptions are the groundwork for the PAMU IOMMU from Freescale (for a PPC platform) and an extension to the IOMMU group interface. On the x86 side this includes a workaround for VT-d to disable interrupt remapping on broken chipsets. On the AMD-Vi side the most important new feature is a kernel command-line interface to override broken information in IVRS ACPI tables and get interrupt remapping working this way. Besides that there are small fixes all over the place." * tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (24 commits) iommu/tegra: Fix printk formats for dma_addr_t iommu: Add a function to find an iommu group by id iommu/vt-d: Remove warning for HPET scope type iommu: Move swap_pci_ref function to drivers/iommu/pci.h. iommu/vt-d: Disable translation if already enabled iommu/amd: fix error return code in early_amd_iommu_init() iommu/AMD: Per-thread IOMMU Interrupt Handling iommu: Include linux/err.h iommu/amd: Workaround for ERBT1312 iommu/amd: Document ivrs_ioapic and ivrs_hpet parameters iommu/amd: Don't report firmware bugs with cmd-line ivrs overrides iommu/amd: Add ioapic and hpet ivrs override iommu/amd: Add early maps for ioapic and hpet iommu/amd: Extend IVRS special device data structure iommu/amd: Move add_special_device() to __init iommu: Fix compile warnings with forward declarations iommu/amd: Properly initialize irq-table lock iommu/amd: Use AMD specific data structure for irq remapping iommu/amd: Remove map_sg_no_iommu() iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets ...
2013-05-06Merge branch 'exynos/pwm-clocksource' into late/multiplatformArnd Bergmann
This series from Tomasz Figa restores support for the pwm clocksource in Exynos, which was broken during the conversion of the platform to the common clk framework. The clocksource is only used in one board in the mainline kernel (universal_c210), and this makes it work for DT based probing as well as restoring the non-DT based case. * exynos/pwm-clocksource: ARM: dts: exynops4210: really add universal_c210 dts ARM: dts: exynos4210: Add basic dts file for universal_c210 board ARM: dts: exynos4: Add node for PWM device ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core clocksource: samsung_pwm_timer: Correct programming of clock events clocksource: samsung_pwm_timer: Use proper clockevents max_delta clocksource: samsung_pwm_timer: Add support for non-DT platforms clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct clocksource: samsung_pwm_timer: Keep all driver data in a structure clocksource: samsung_pwm_timer: Make PWM spinlock global clocksource: samsung_pwm_timer: Let platforms select the driver Documentation: Add device tree bindings for Samsung PWM timers clocksource: add samsung pwm timer driver Conflicts: arch/arm/boot/dts/Makefile arch/arm/mach-exynos/common.c drivers/clocksource/Kconfig drivers/clocksource/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-06Merge branch 'late/clksrc' into late/cleanupArnd Bergmann
There is no reason to keep the clksrc cleanups separate from the other cleanups, and this resolves some merge conflicts. Conflicts: arch/arm/mach-spear/spear13xx.c drivers/irqchip/Makefile
2013-05-06Fix cleaning in scripts/modAndreas Schwab
Make sure devicetable-offsets.h is cleaned in the scripts/mod directory Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-05-06Merge branch 'late/dt' into next/dt2Arnd Bergmann
This is support for the ARM Chromebook, originally scheduled as a "late" pull request. Since it's already late now, we can combine this into the existing next/dt2 branch. * late/dt: ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
2013-05-06NFSv3: match sec= flavor against server listWeston Andros Adamson
Older linux clients match the 'sec=' mount option flavor against the server's flavor list (if available) and return EPERM if the specified flavor or AUTH_NULL (which "matches" any flavor) is not found. Recent changes skip this step and allow the vfs mount even though no operations will succeed, creating a 'dud' mount. This patch reverts back to the old behavior of matching specified flavors against the server list and also returns EPERM when no sec= is specified and none of the flavors returned by the server are supported by the client. Example of behavior change: the server's /etc/exports: /export/krb5 *(sec=krb5,rw,no_root_squash) old client behavior: $ uname -a Linux one.apikia.fake 3.8.8-202.fc18.x86_64 #1 SMP Wed Apr 17 23:25:17 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux $ sudo mount -v -o sec=sys,vers=3 zero:/export/krb5 /mnt mount.nfs: timeout set for Sun May 5 17:32:04 2013 mount.nfs: trying text-based options 'sec=sys,vers=3,addr=192.168.100.10' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: trying 192.168.100.10 prog 100003 vers 3 prot TCP port 2049 mount.nfs: prog 100005, trying vers=3, prot=17 mount.nfs: trying 192.168.100.10 prog 100005 vers 3 prot UDP port 20048 mount.nfs: mount(2): Permission denied mount.nfs: access denied by server while mounting zero:/export/krb5 recently changed behavior: $ uname -a Linux one.apikia.fake 3.9.0-testing+ #2 SMP Fri May 3 20:29:32 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux $ sudo mount -v -o sec=sys,vers=3 zero:/export/krb5 /mnt mount.nfs: timeout set for Sun May 5 17:37:17 2013 mount.nfs: trying text-based options 'sec=sys,vers=3,addr=192.168.100.10' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: trying 192.168.100.10 prog 100003 vers 3 prot TCP port 2049 mount.nfs: prog 100005, trying vers=3, prot=17 mount.nfs: trying 192.168.100.10 prog 100005 vers 3 prot UDP port 20048 $ ls /mnt ls: cannot open directory /mnt: Permission denied $ sudo ls /mnt ls: cannot open directory /mnt: Permission denied $ sudo df /mnt df: ‘/mnt’: Permission denied df: no file systems processed $ sudo umount /mnt $ Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-06NFSv4.1: Ensure that we free the lock stateid on the serverTrond Myklebust
This ensures that the server doesn't need to keep huge numbers of lock stateids waiting around for the final CLOSE. See section 8.2.4 in RFC5661. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-06NFSv4: Convert nfs41_free_stateid to use an asynchronous RPC callTrond Myklebust
The main reason for doing this is will be to allow for an asynchronous RPC mode that we can use for freeing lock stateids as per section 8.2.4 of RFC5661. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-06parisc: implement atomic64_dec_if_positive()Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06parisc: use long branch in fork_like macroJohn David Anglin
The "b" branch instruction used in the fork_like macro only can handle 17-bit pc-relative offsets. This fails with an out of range offset with some .config files. Rewrite to use the "be" instruction which can branch to any address in a space. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06parisc: fix NATIVE set up in buildMike Frysinger
The ifeq operator does not accept globs, so this little bit of code will never match (unless uname literally prints out "parsic*"). Rewrite to use a pattern matching operator so that NATIVE is set to 1 on parisc. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06parisc: document the parisc gateway pageHelge Deller
Include some documentation about how the parisc gateway page technically works and how it is used from userspace. James Bottomley is the original author of this description and it was copied here out of an email thread from Apr 12 2013 titled: man2 : syscall.2 : document syscall calling conventions CC: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06parisc: fix partly 16/64k PAGE_SIZE bootHelge Deller
This patch fixes partly PAGE_SIZEs of 16K or 64K by adjusting the assembler PTE lookup code and the assembler TEMPALIAS code. Furthermore some data alignments for PAGE_SIZE have been limited to 4K (or less) to not waste too much memory with greater page sizes. As a side note, the palo loader can (currently) only handle up to 10 ELF segments which is fixed with tighter aligning as well. My testings indicated that the ldci command in the sba iommu coding needed adjustment by the PAGE_SHIFT value and that the I/O PDIR Page size was only set to 4K for my machine (C3000). All this fixes partly the boot, but there are still quite some caching problems left. Examples are e.g. the symbios logic driver which is failing: sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 69 sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking CACHE TEST FAILED: DMA error (dstat=0x81).sym0: CACHE INCORRECTLY CONFIGURED. and the tulip network driver which doesn't seem to work correctly either: Sending BOOTP requests .net eth0: Setting full-duplex based on MII#1 link partner capability of 05e1 ..... timed out! Beside those kernel fixes glibc will need fixes too to be able to handle >4K page sizes. Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06parisc: Provide default implementation for dma_{alloc, free}_attrsDamian Hobson-Garcia
Most architectures that define CONFIG_HAVE_DMA, have implementations for both dma_alloc_attrs() and dma_free_attrs(). All achitectures that do not define CONFIG_HAVE_DMA also have both of these definitions provided by dma-mapping-broken.h. Add default implementations for these functions on parisc. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06parisc: fix whitespace errors in arch/parisc/kernel/traps.cRolf Eike Beer
Things like " \t" and whitespace at end of line. I'm leaving all the other coding style errors here alone. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06mm, slab_common: Fix bootstrap creation of kmalloc cachesChristoph Lameter
For SLAB the kmalloc caches must be created in ascending sizes in order for the OFF_SLAB sub-slab cache to work properly. Create the non power of two caches immediately after the prior power of two kmalloc cache. Do not create the non power of two caches before all other caches. Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Christoph Lamete <cl@linux.com> Link: http://lkml.kernel.org/r/201305040348.CIF81716.OStQOHFJMFLOVF@I-love.SAKURA.ne.jp Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-05-06parisc: remove the second argument of kmap_atomicZhao Hongjiang
kmap_atomic allows only one argument now, just move the second. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06tipc: potential divide by zero in tipc_link_recv_fragment()Dan Carpenter
The worry here is that fragm_sz could be zero since it comes from skb->data. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06tipc: add a bounds check in link_recv_changeover_msg()Dan Carpenter
The bearer_id here comes from skb->data and it can be a number from 0 to 7. The problem is that the ->links[] array has only 2 elements so I have added a range check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-18 17:11:28 +0000