summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-20firmware: arm_scmi: Implement clock get permissionsPeng Fan
ARM SCMI v3.2 introduces clock get permission command. To implement the same let us stash the values of those permissions in the scmi_clock_info. They indicate if the operation is forbidden or not. If the CLOCK_GET_PERMISSIONS command is not supported, the default permissions are set to allow the operations, otherwise they will be set according to the response of CLOCK_GET_PERMISSIONS from the SCMI platform firmware. Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20240121110901.1414856-1-peng.fan@oss.nxp.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-02-20firmware: arm_scmi: Add multiple protocols registration supportCristian Marussi
Add the capability for a SCMI driver to register to the core SCMI stack with multiple SCMI protocols. In such a case the SCMI driver probe function will end up being called once for each registered protocol which have been also found as implemented on the platform. This is especially useful in testing scenarios. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20231221151129.325749-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-02-20firmware: arm_scmi: Rework clock domain info lookupsCristian Marussi
Accessing clock domains descriptors by the index from the SCMI drivers can potentially lead to out-of-bound violations if the SCMI drivers misbehaves. Use a common helper to check the consistency of such accesses. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20240110120916.2482603-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-02-20firmware: arm_scmi: Warn if domain frequency multiplier is 0 or rounded offSudeep Holla
When (sustained_freq_khz * 1000) is less than sustained_perf_level, the multiplier will be less than 1 and hence rounded down as 0. Similarly if it is not multiple of sustained_perf_level the dom_info->mult_factor will contain rounded down value and will end up impacting all the frequency calculations done using it. Add warning if and when the domain frequency multiplier is 0 or rounded down so that it gives a clue to get the firmware tables fixed. Suggested-by: Pierre Gondois <Pierre.Gondois@arm.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20240119152338.3047620-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-01-22firmware: arm_scmi: Fix the clock protocol supported versionCristian Marussi
Rollback currently supported SCMI clock protocol version to v2.0 since some of the mandatory v3.0 features are indeed still not supported yet. Fixes: b5efc28a754d ("firmware: arm_scmi: Add protocol versioning checks") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20240109181716.2338636-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-01-22firmware: arm_scmi: Fix the clock protocol version for v3.2Cristian Marussi
The clock protocol version as per the SCMI v3.2 specification is 0x30000. Enable the v3.0 clock protocol features only when clock protocol version equals 0x30000. The previous beta version of the spec had this value set to 0x20001 and th same value trickled down from the initial development. The version update were missed in the driver. Fixes: e49e314a2cf7 ("firmware: arm_scmi: Add clock v3.2 CONFIG_SET support") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20240109150106.2066739-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-01-22firmware: arm_scmi: Use xa_insert() when saving raw queuesCristian Marussi
Use xa_insert() when saving per-channel raw queues to better check for duplicates. Fixes: 7860701d1e6e ("firmware: arm_scmi: Add per-channel raw injection support") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20240108185050.1628687-2-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-01-22firmware: arm_scmi: Use xa_insert() to store oppsCristian Marussi
When storing opps by level or index use xa_insert() instead of xa_store() and add error-checking to spot bad duplicates indexes possibly wrongly provided by the platform firmware. Fixes: 31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20240108185050.1628687-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-01-22firmware: arm_scmi: Replace asm-generic/bug.h with linux/bug.hTanzir Hasan
linux/bug.h includes asm-generic/bug.h already and hence replacing asm-generic/bug.h with linux/bug.h will not regress any build. Also, it is always better to avoid header file inclusion from asm-generic if possible. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tanzir Hasan <tanzirh@google.com> Link: https://lore.kernel.org/r/20231226-shmem-v1-1-ea15ce81d8ba@google.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-01-22firmware: arm_scmi: Check mailbox/SMT channel for consistencyCristian Marussi
On reception of a completion interrupt the shared memory area is accessed to retrieve the message header at first and then, if the message sequence number identifies a transaction which is still pending, the related payload is fetched too. When an SCMI command times out the channel ownership remains with the platform until eventually a late reply is received and, as a consequence, any further transmission attempt remains pending, waiting for the channel to be relinquished by the platform. Once that late reply is received the channel ownership is given back to the agent and any pending request is then allowed to proceed and overwrite the SMT area of the just delivered late reply; then the wait for the reply to the new request starts. It has been observed that the spurious IRQ related to the late reply can be wrongly associated with the freshly enqueued request: when that happens the SCMI stack in-flight lookup procedure is fooled by the fact that the message header now present in the SMT area is related to the new pending transaction, even though the real reply has still to arrive. This race-condition on the A2P channel can be detected by looking at the channel status bits: a genuine reply from the platform will have set the channel free bit before triggering the completion IRQ. Add a consistency check to validate such condition in the A2P ISR. Reported-by: Xinglong Yang <xinglong.yang@cixtech.com> Closes: https://lore.kernel.org/all/PUZPR06MB54981E6FA00D82BFDBB864FBF08DA@PUZPR06MB5498.apcprd06.prod.outlook.com/ Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Cc: stable@vger.kernel.org # 5.15+ Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Xinglong Yang <xinglong.yang@cixtech.com> Link: https://lore.kernel.org/r/20231220172112.763539-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-01-21Linux 6.8-rc1v6.8-rc1Linus Torvalds
2024-01-21Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefsLinus Torvalds
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ...
2024-01-21Merge tag 'timers-core-2024-01-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
2024-01-21Merge tag 'powerpc-6.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
2024-01-21bcachefs: Improve inode_to_text()Kent Overstreet
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: logged_ops_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: reflink_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs; extents_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: ec_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: subvolume_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: snapshot_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: alloc_background_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: xattr_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: dirent_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: inode_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs; quota_format.hKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: sb-counters_format.hKent Overstreet
bcachefs_format.h has gotten too big; let's do some organizing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: counters.c -> sb-counters.cKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: comment bch_subvolumeKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch_snapshot::btimeKent Overstreet
Add a field to bch_snapshot for creation time; this will be important when we start exposing the snapshot tree to userspace. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: add missing __GFP_NOWARNKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: opts->compression can now also be applied in the backgroundKent Overstreet
The "apply this compression method in the background" paths now use the compression option if background_compression is not set; this means that setting or changing the compression option will cause existing data to be compressed accordingly in the background. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Prep work for variable size btree node buffersKent Overstreet
bcachefs btree nodes are big - typically 256k - and btree roots are pinned in memory. As we're now up to 18 btrees, we now have significant memory overhead in mostly empty btree roots. And in the future we're going to start enforcing that certain btree node boundaries exist, to solve lock contention issues - analagous to XFS's AGIs. Thus, we need to start allocating smaller btree node buffers when we can. This patch changes code that refers to the filesystem constant c->opts.btree_node_size to refer to the btree node buffer size - btree_buf_bytes() - where appropriate. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: grab s_umount only if snapshottingSu Yue
When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d237320e98 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by: Su Yue <glass.su@suse.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exitSu Yue
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bios must be 512 byte alginedKent Overstreet
Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: remove redundant variable tmpColin Ian King
The variable tmp is being assigned a value but it isn't being read afterwards. The assignment is redundant and so tmp can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Improve trace_trans_restart_relockKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Fix excess transaction restarts in __bchfs_fallocate()Kent Overstreet
drop_locks_do() should not be used in a fastpath without first trying the do in nonblocking mode - the unlock and relock will cause excessive transaction restarts and potentially livelocking with other threads that are contending for the same locks. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: extents_to_bp_stateKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bkey_and_val_eq()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Better journal tracepointsKent Overstreet
Factor out bch2_journal_bufs_to_text(), and use it in the journal_entry_full() tracepoint; when we can't get a journal reservation we need to know the outstanding journal entry sizes to know if the problem is due to excessive flushing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Print size of superblock with space allocatedKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Avoid flushing the journal in the discard pathKent Overstreet
When issuing discards, we may need to flush the journal if there's too many buckets that can't be discarded until a journal flush. But the heuristic was bad; we should be comparing the number of buckets that need to flushes against the number of free buckets, not the number of buckets we saw. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Improve move_extent tracepointKent Overstreet
Also print out the data_opts, so that we can see what specifically is being done to an extent. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Add missing bch2_moving_ctxt_flush_all()Kent Overstreet
This fixes a bug with rebalance IOs getting stuck with reads completed, but writes never being issued. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Re-add move_extent_write tracepointKent Overstreet
It appears this was accidentally deleted at some point - also, do a bit of cleanup. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amountKent Overstreet
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code that uses it to be woken up for other reasons, and fixes a bug where rebalance wouldn't wake up when a scan was requested. This raises the possibility of spurious wakeups, but callers should always be able to handle that reasonably well. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Add .val_to_text() for KEY_TYPE_cookieKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Don't pass memcmp() as a pointerKent Overstreet
Some (buggy!) compilers have issues with this. Fixes: https://github.com/koverstreet/bcachefs/issues/625 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
generated by cgit (git 2.34.1) at 2025-07-16 03:02:24 +0000