| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
More fixes:
- ath12k
- avoid busy-waiting
- activate correct number of links
- iwlwifi
- iwldvm regression (lots of warnings)
- iwlmld merge damage regression (crash)
- fix build with some old gcc versions
- carl9170: don't talk to device w/o FW [syzbot]
- ath6kl: remove bad FW WARN [syzbot]
- ieee80211: use variable-length arrays [syzbot]
- mac80211
- remove WARN on delayed beacon update [syzbot]
- drop OCB frames with invalid source [syzbot]
* tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking
wifi: iwlwifi: dvm: restore n_no_reclaim_cmds setting
wifi: iwlwifi: cfg: Limit cb_size to valid range
wifi: iwlwifi: restore missing initialization of async_handlers_list (again)
wifi: ath6kl: remove WARN on bad firmware input
wifi: carl9170: do not ping device which has failed to load firmware
wifi: ath12k: don't wait when there is no vdev started
wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process()
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: fix documentation on firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: ath12k: update link active in case two links fall on the same MAC
wifi: ath12k: support WMI_MLO_LINK_SET_ACTIVE_CMDID command
wifi: ath12k: update freq range for each hardware mode
wifi: ath12k: parse and save sbs_lower_band_end_freq from WMI_SERVICE_READY_EXT2_EVENTID event
wifi: ath12k: parse and save hardware mode info from WMI_SERVICE_READY_EXT_EVENTID event for later use
wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STAT
wifi: mac80211: don't WARN for late channel/color switch
wifi: mac80211: drop invalid source address OCB frames
wifi: remove zero-length arrays
====================
Link: https://patch.msgid.link/20250618210642.35805-6-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The multi message support loosened the connection between the request
and response handling, as we can now submit multiple requests before
we start processing responses. Passing the attr set to NlMsgs decoding
no longer makes sense (if it ever did), attr set may differ message
by messsage. Isolate the part of decoding responsible for attr-set
specific interpretation and call it once we identified the correct op.
Without this fix performing SET operation on an ethtool socket, while
being subscribed to notifications causes:
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1096, in _op
# Exception| return self._ops(ops)[0]
# Exception| ~~~~~~~~~^^^^^
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1040, in _ops
# Exception| nms = NlMsgs(reply, attr_space=op.attr_set)
# Exception| ^^^^^^^^^^^
The value of op we use on line 1040 is stale, it comes form the previous
loop. If a notification comes before a response we will update op to None
and the next iteration thru the loop will break with the trace above.
Fixes: 6fda63c45fe8 ("tools/net/ynl: fix cli.py --subscribe feature")
Fixes: ba8be00f68f5 ("tools/net/ynl: Add multi message support to ynl")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250618171746.1201403-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net: atm: protect dev_lec[] with a mutex
Based on an initial syzbot report.
First patch is adding lec_mutex to address the report.
Second patch protects /proc/net/atm/lec operations.
We probably should delete this driver, it seems quite broken.
====================
Link: https://patch.msgid.link/20250618140844.1686882-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
/proc/net/atm/lec must ensure safety against dev_lec[] changes.
It appears it had dev_put() calls without prior dev_hold(),
leading to imbalance and UAF.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # Minor atm contributor
Link: https://patch.msgid.link/20250618140844.1686882-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found its way in net/atm/lec.c, and found an error path
in lecd_attach() could leave a dangling pointer in dev_lec[].
Add a mutex to protect dev_lecp[] uses from lecd_attach(),
lec_vcc_attach() and lec_mcast_attach().
Following patch will use this mutex for /proc/net/atm/lec.
BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline]
BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008
Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142
CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xcd/0x680 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
lecd_attach net/atm/lec.c:751 [inline]
lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x118/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 6132:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4328 [inline]
__kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015
alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711
lecd_attach net/atm/lec.c:737 [inline]
lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x118/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6132:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x51/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x2b4/0x4d0 mm/slub.c:4842
free_netdev+0x6c5/0x910 net/core/dev.c:11892
lecd_attach net/atm/lec.c:744 [inline]
lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x118/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+8b64dec3affaed7b3af5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6852c6f6.050a0220.216029.0018.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250618140844.1686882-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The message "Error getting PHY irq. Use polling instead"
is emitted when the mlxbf_gige driver is loaded by the
kernel before the associated gpio-mlxbf driver, and thus
the call to get the PHY IRQ fails since it is not yet
available. The driver probe() must return -EPROBE_DEFER
if acpi_dev_gpio_irq_get_by() returns the same.
Fixes: 6c2a6ddca763 ("net: mellanox: mlxbf_gige: Replace non-standard interrupt handling")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618135902.346-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
airoha_ppe_foe_get_entry routine can return NULL, so check the returned
pointer is not NULL in airoha_ppe_foe_flow_l2_entry_update()
Fixes: b81e0f2b58be3 ("net: airoha: Add FLOW_CLS_STATS callback support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250618-check-ret-from-airoha_ppe_foe_get_entry-v2-1-068dcea3cc66@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Setting tty->disc_data before opening the NCI device means we need to
clean it up on error paths. This also opens some short window if device
starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded
(broken hardware?). Close the window by exposing tty->disc_data only on
the success path, when opening of the NCI device and try_module_get()
succeeds.
The code differs in error path in one aspect: tty->disc_data won't be
ever assigned thus NULL-ified. This however should not be relevant
difference, because of "tty->disc_data=NULL" in nci_uart_tty_open().
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Fixes: 9961127d4bce ("NFC: nci: add generic uart support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250618073649.25049-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported a null-ptr-deref in sock_omalloc() while allocating
a CALIPSO option. [0]
The NULL is of struct sock, which was fetched by sk_to_full_sk() in
calipso_req_setattr().
Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"),
reqsk->rsk_listener could be NULL when SYN Cookie is returned to its
client, as hinted by the leading SYN Cookie log.
Here are 3 options to fix the bug:
1) Return 0 in calipso_req_setattr()
2) Return an error in calipso_req_setattr()
3) Alaways set rsk_listener
1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie
for CALIPSO. 3) is also no go as there have been many efforts to reduce
atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35
("tcp/dccp: do not touch listener sk_refcnt under synflood").
As of the blamed commit, SYN Cookie already did not need refcounting,
and no one has stumbled on the bug for 9 years, so no CALIPSO user will
care about SYN Cookie.
Let's return an error in calipso_req_setattr() and calipso_req_delattr()
in the SYN Cookie case.
This can be reproduced by [1] on Fedora and now connect() of nc times out.
[0]:
TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline]
RIP: 0010:sock_net include/net/sock.h:655 [inline]
RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806
Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
RSP: 0018:ffff88811af89038 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400
RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030
RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e
R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000
R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050
FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<IRQ>
ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288
calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204
calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597
netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249
selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342
selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551
security_inet_conn_request+0x50/0xa0 security/security.c:4945
tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825
tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275
tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328
tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781
tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667
tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904
ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436
ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:469 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ipv6_rcv+0xf9/0x490 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core+0x12e/0x1f0 net/core/dev.c:5896
__netif_receive_skb+0x1d/0x170 net/core/dev.c:6009
process_backlog+0x41e/0x13b0 net/core/dev.c:6357
__napi_poll+0xbd/0x710 net/core/dev.c:7191
napi_poll net/core/dev.c:7260 [inline]
net_rx_action+0x9de/0xde0 net/core/dev.c:7382
handle_softirqs+0x19a/0x770 kernel/softirq.c:561
do_softirq.part.0+0x36/0x70 kernel/softirq.c:462
</IRQ>
<TASK>
do_softirq arch/x86/include/asm/preempt.h:26 [inline]
__local_bh_enable_ip+0xf1/0x110 kernel/softirq.c:389
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0xc2a/0x3c40 net/core/dev.c:4679
dev_queue_xmit include/linux/netdevice.h:3313 [inline]
neigh_hh_output include/net/neighbour.h:523 [inline]
neigh_output include/net/neighbour.h:537 [inline]
ip6_finish_output2+0xd69/0x1f80 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0x5dc/0xd60 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x24b/0x8d0 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:459 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip6_xmit+0xbbc/0x20d0 net/ipv6/ip6_output.c:366
inet6_csk_xmit+0x39a/0x720 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x1a7b/0x3b40 net/ipv4/tcp_output.c:1471
tcp_transmit_skb net/ipv4/tcp_output.c:1489 [inline]
tcp_send_syn_data net/ipv4/tcp_output.c:4059 [inline]
tcp_connect+0x1c0c/0x4510 net/ipv4/tcp_output.c:4148
tcp_v6_connect+0x156c/0x2080 net/ipv6/tcp_ipv6.c:333
__inet_stream_connect+0x3a7/0xed0 net/ipv4/af_inet.c:677
tcp_sendmsg_fastopen+0x3e2/0x710 net/ipv4/tcp.c:1039
tcp_sendmsg_locked+0x1e82/0x3570 net/ipv4/tcp.c:1091
tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1358
inet6_sendmsg+0xb9/0x150 net/ipv6/af_inet6.c:659
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0xf4/0x2a0 net/socket.c:733
__sys_sendto+0x29a/0x390 net/socket.c:2187
__do_sys_sendto net/socket.c:2194 [inline]
__se_sys_sendto net/socket.c:2190 [inline]
__x64_sys_sendto+0xe1/0x1c0 net/socket.c:2190
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc3/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f06553c47ed
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f0653a06fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f0655605fa0 RCX: 00007f06553c47ed
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000000b
RBP: 00007f065545db38 R08: 0000200000000140 R09: 000000000000001c
R10: f7384d4ea84b01bd R11: 0000000000000246 R12: 0000000000000000
R13: 00007f0655605fac R14: 00007f0655606038 R15: 00007f06539e7000
</TASK>
Modules linked in:
[1]:
dnf install -y selinux-policy-targeted policycoreutils netlabel_tools procps-ng nmap-ncat
mount -t selinuxfs none /sys/fs/selinux
load_policy
netlabelctl calipso add pass doi:1
netlabelctl map del default
netlabelctl map add default address:::1 protocol:calipso,1
sysctl net.ipv4.tcp_syncookies=2
nc -l ::1 80 &
nc ::1 80
Fixes: e1adea927080 ("calipso: Allow request sockets to be relabelled by the lsm.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: John Cheung <john.cs.hey@gmail.com>
Closes: https://lore.kernel.org/netdev/CAP=Rh=MvfhrGADy+-WJiftV2_WzMH4VEhEFmeT28qY+4yxNu4w@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20250617224125.17299-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Brett Creeley is taking ownership of AMD/Pensando drivers while I wander
off into the sunset with my retirement this month. I'll still keep an
eye out on a few topics for awhile, and maybe do some free-lance work in
the future.
Meanwhile, thank you all for the fun and support and the many learning
opportunities :-).
Special thanks go to DaveM for merging my first patch long ago, the big
ionic patchset a few years ago, and my last patchset last week.
Redirect things to a non-corporate account.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20250616224437.56581-1-shannon.nelson@amd.com
[Jakub: squash in the .mailmap update]
Signed-off-by: Shannon Nelson <sln@onemain.com>
Link: https://patch.msgid.link/20250619010603.1173141-1-sln@onemain.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lan743x_ptp_io_event_clock_get()
Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value
is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8).
This seems correct and aligns with the PTP interrupt status register
(PTP_INT_STS) specifications.
However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with
only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index:
lan743x_ptp_io_event_clock_get(..., u8 channel,...)
{
...
/* Update Local timestamp */
extts = &ptp->extts[channel];
extts->ts.tv_sec = sec;
...
}
To avoid an out-of-bounds write and utilize all the supported GPIO
inputs, set LAN743X_PTP_N_EXTTS to 8.
Detected using the static analysis tool - Svace.
Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://patch.msgid.link/20250616113743.36284-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The semantics are that caller of fbnic_mbx_map_msg() retains
the ownership of the message on error. All existing callers
dutifully free the page.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250616195510.225819-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
David Wei says:
====================
net: fix passive TFO socket having invalid NAPI ID
Found a bug where an accepted passive TFO socket returns an invalid NAPI
ID (i.e. 0) from SO_INCOMING_NAPI_ID. Add a selftest for this using
netdevsim and fix the bug.
Patch 1 is a drive-by fix for the lib.sh include in an existing
drivers/net/netdevsim/peer.sh selftest.
Patch 2 adds a test binary for a simple TFO server/client.
Patch 3 adds a selftest for checking that the NAPI ID of a passive TFO
socket is valid. This will currently fail.
Patch 4 adds a fix for the bug.
====================
Link: https://patch.msgid.link/20250617212102.175711-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a bug with passive TFO sockets returning an invalid NAPI ID 0
from SO_INCOMING_NAPI_ID. Normally this is not an issue, but zero copy
receive relies on a correct NAPI ID to process sockets on the right
queue.
Fix by adding a sk_mark_napi_id_set().
Fixes: e5907459ce7e ("tcp: Record Rx hash and NAPI ID in tcp_child_process")
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250617212102.175711-5-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test that checks that the NAPI ID of a passive TFO socket is valid
i.e. not zero.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250617212102.175711-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a simple passive TFO server and client test binary. This will be
used to test the SO_INCOMING_NAPI_ID of passive TFO accepted sockets.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250617212102.175711-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the peer.sh test to run from INSTALL_PATH.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250617212102.175711-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The reproduction steps:
1. create a tun interface
2. enable l2 bearer
3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun
tipc: Started in network mode
tipc: Node identity 8af312d38a21, cluster identity 4711
tipc: Enabled bearer <eth:syz_tun>, priority 1
Oops: general protection fault
KASAN: null-ptr-deref in range
CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT
Hardware name: QEMU Ubuntu 24.04 PC
RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0
the ub was in fact a struct dev.
when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or
other media when other thread changes it.
fix this by checking media_id.
Fixes: 832629ca5c313 ("tipc: add UDP remoteip dump to netlink API")
Signed-off-by: Haixia Qu <hxqu@hillstonenet.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250617055624.2680-1-hxqu@hillstonenet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NIX block can receive packets from multiple links such as
MAC (RPM), LBK and CPT.
-----------------
RPM --| NIX |
-----------------
|
|
LBK
Each link supports multiple channels for example RPM link supports
16 channels. In case of link oversubsribe, NIX will assert backpressure
on receive channels.
The previous patch considered a single channel per link, resulting in
backpressure not being enabled on the remaining channels
Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250617063403.3582210-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-06-17 (ice, e1000e)
For ice:
Krishna Kumar modifies aRFS match criteria to correctly identify
matching filters.
Grzegorz fixes a memory leak in eswitch legacy mode.
For e1000e:
Vitaly sets clock frequency on some Nahum systems which may misreport
their value.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: set fixed clock frequency indication for Nahum 11 and Nahum 13
ice: fix eswitch code memory leak in reset scenario
net: ice: Perform accurate aRFS flow match
====================
Link: https://patch.msgid.link/20250617172444.1419560-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Depending on e.g. DT configuration this driver uses a fixed link.
So we shouldn't rely on the user to enable FIXED_PHY, select it in
Kconfig instead. We may end up with a non-functional driver otherwise.
Fixes: 38561ded50d0 ("net: ftgmac100: support fixed link")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/476bb33b-5584-40f0-826a-7294980f2895@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit under fixes switched to uAPI generation from the YAML
spec. A number of custom defines were left behind, mostly
for commands very hard to express in YAML spec.
Among what was left behind was the name and version of
the generic netlink family. Problem is that the codegen
always outputs those values so we ended up with a duplicated,
differently named set of defines.
Provide naming info in YAML and remove the incorrect defines.
Fixes: 8d0580c6ebdd ("ethtool: regenerate uapi header from the spec")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250617202240.811179-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
fixes for 6.16-rc3
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After the following commit from 2024:
commit e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent")
...there was buggy behavior where TCP connections without SACK support
could easily see erroneous undo events at the end of fast recovery or
RTO recovery episodes. The erroneous undo events could cause those
connections to suffer repeated loss recovery episodes and high
retransmit rates.
The problem was an interaction between the non-SACK behavior on these
connections and the undo logic. The problem is that, for non-SACK
connections at the end of a loss recovery episode, if snd_una ==
high_seq, then tcp_is_non_sack_preventing_reopen() holds steady in
CA_Recovery or CA_Loss, but clears tp->retrans_stamp to 0. Then upon
the next ACK the "tcp: fix to allow timestamp undo if no retransmits
were sent" logic saw the tp->retrans_stamp at 0 and erroneously
concluded that no data was retransmitted, and erroneously performed an
undo of the cwnd reduction, restoring cwnd immediately to the value it
had before loss recovery. This caused an immediate burst of traffic
and build-up of queues and likely another immediate loss recovery
episode.
This commit fixes tcp_packet_delayed() to ignore zero retrans_stamp
values for non-SACK connections when snd_una is at or above high_seq,
because tcp_is_non_sack_preventing_reopen() clears retrans_stamp in
this case, so it's not a valid signal that we can undo.
Note that the commit named in the Fixes footer restored long-present
behavior from roughly 2005-2019, so apparently this bug was present
for a while during that era, and this was simply not caught.
Fixes: e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent")
Reported-by: Eric Wheeler <netdev@lists.ewheeler.net>
Closes: https://lore.kernel.org/netdev/64ea9333-e7f9-0df-b0f2-8d566143acab@ewheeler.net/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current cmd_ver range checking on cmd_ver < 1 && cmd_ver > 3 can
never be true because the logical operator && is being used, cmd_ver
can never be less than 1 and also greater than 3. Fix this by using
the logical || operator.
Fixes: df6146a0296e ("wifi: iwlwifi: Add a new version for mac config command")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250522121703.2766764-1-colin.i.king@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Apparently I accidentally removed this setting in my transport
configuration rework, leading to an endless stream of warnings
from the PCIe code when relevant notifications are received by
the driver from firmware. Restore it.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Closes: https://lore.kernel.org/r/e8c45d32-6129-8a5e-af80-ccc42aaf200b@gmail.com/
Fixes: 08e77d5edf70 ("wifi: iwlwifi: rework transport configuration")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250616134902.222342908ca4.I47a551c86cbc0e9de4f980ca2fd0d67bf4052e50@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
on arm64 defconfig build failed with gcc-8:
drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info.c:208:3:
include/linux/bitfield.h:195:3: error: call to '__field_overflow'
declared with attribute error: value doesn't fit into mask
__field_overflow(); \
^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:215:2: note: in expansion of macro '____MAKE_OP'
____MAKE_OP(u##size,u##size,,)
^~~~~~~~~~~
include/linux/bitfield.h:218:1: note: in expansion of macro '__MAKE_OP'
__MAKE_OP(32)
Limit cb_size to valid range to fix it.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/7b373a4426070d50b5afb3269fd116c18ce3aea8.1748332709.git.xiaopei01@kylinos.cn
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The initialization of async_handlers_list
was accidentally removed in a previous change.
Then it was restoted by commit 175e69e33c66 ("wifi: iwlwifi: restore
missing initialization of async_handlers_list").
Somehow, the initialization disappeared again.
Restote it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git updates for v6.16-rc3
Fix the following 3 issues:
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: carl9170: do not ping device which has failed to load firmware
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the firmware gives bad input, that's nothing to do with
the driver's stack at this point etc., so the WARN_ON()
doesn't add any value. Additionally, this is one of the
top syzbot reports now. Just print a message, and as an
added bonus, print the sizes too.
Reported-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Tested-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250617114529.031a677a348e.I58bf1eb4ac16a82c546725ff010f3f0d2b0cca49@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Kuniyuki Iwashima says:
====================
atm: Fix uninit and mem accounting leak in vcc_sendmsg().
Patch 1 fixes uninit issue reported by KMSAN, and patch 2 fixes
another issue found by Simon Horman during review for v1 patch.
v1: https://lore.kernel.org/20250613055700.415596-1-kuni1840@gmail.com
====================
Link: https://patch.msgid.link/20250616182147.963333-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by
atm_account_tx().
It is expected to be reverted by atm_pop_raw() later called by
vcc->dev->ops->send(vcc, skb).
However, vcc_sendmsg() misses the same revert when copy_from_iter_full()
fails, and then we will leak a socket.
Let's factorise the revert part as atm_return_tx() and call it in
the failure path.
Note that the corresponding sk_wmem_alloc operation can be found in
alloc_tx() as of the blamed commit.
$ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20250614161959.GR414686@horms.kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616182147.963333-3-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the splat below. [0]
vcc_sendmsg() copies data passed from userspace to skb and passes
it to vcc->dev->ops->send().
atmtcp_c_send() accesses skb->data as struct atmtcp_hdr after
checking if skb->len is 0, but it's not enough.
Also, when skb->len == 0, skb and sk (vcc) were leaked because
dev_kfree_skb() is not called and sk_wmem_alloc adjustment is missing
to revert atm_account_tx() in vcc_sendmsg(), which is expected
to be done in atm_pop_raw().
Let's properly free skb with an invalid length in atmtcp_c_send().
[0]:
BUG: KMSAN: uninit-value in atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294
atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294
vcc_sendmsg+0xd7c/0xff0 net/atm/common.c:644
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655
x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4154 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
kmem_cache_alloc_node_noprof+0x818/0xf00 mm/slub.c:4249
kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:579
__alloc_skb+0x347/0x7d0 net/core/skbuff.c:670
alloc_skb include/linux/skbuff.h:1336 [inline]
vcc_sendmsg+0xb40/0xff0 net/atm/common.c:628
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655
x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 5798 Comm: syz-executor192 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(undef)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+1d3c235276f62963e93a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1d3c235276f62963e93a
Tested-by: syzbot+1d3c235276f62963e93a@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616182147.963333-2-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As syzbot reported [0], mpls_route_input_rcu() can be called
from mpls_getroute(), where is under RTNL.
net->mpls.platform_label is only updated under RTNL.
Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to
silence the splat.
[0]:
WARNING: suspicious RCU usage
6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted
----------------------------
net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.2.4451/17730:
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline]
#0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x371/0xe90 net/core/rtnetlink.c:6961
stack backtrace:
CPU: 1 UID: 0 PID: 17730 Comm: syz.2.4451 Not tainted 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x166/0x260 kernel/locking/lockdep.c:6865
mpls_route_input_rcu+0x1d4/0x200 net/mpls/af_mpls.c:84
mpls_getroute+0x621/0x1ea0 net/mpls/af_mpls.c:2381
rtnetlink_rcv_msg+0x3c9/0xe90 net/core/rtnetlink.c:6964
netlink_rcv_skb+0x16d/0x440 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa98/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
__sys_sendmmsg+0x200/0x420 net/socket.c:2709
__do_sys_sendmmsg net/socket.c:2736 [inline]
__se_sys_sendmmsg net/socket.c:2733 [inline]
__x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2733
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x230 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0a2818e969
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f0a28f52038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007f0a283b5fa0 RCX: 00007f0a2818e969
RDX: 0000000000000003 RSI: 0000200000000080 RDI: 0000000000000003
RBP: 00007f0a28210ab1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f0a283b5fa0 R15: 00007ffce5e9f268
</TASK>
Fixes: 0189197f4416 ("mpls: Basic routing support")
Reported-by: syzbot+8a583bdd1a5cc0b0e068@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68507981.a70a0220.395abc.01ef.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616201532.1036568-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reports [1, 2] crashes caused by an attempts to ping
the device which has failed to load firmware. Since such a device
doesn't pass 'ieee80211_register_hw()', an internal workqueue
managed by 'ieee80211_queue_work()' is not yet created and an
attempt to queue work on it causes null-ptr-deref.
[1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff
[2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217
Fixes: e4a668c59080 ("carl9170: fix spurious restart due to high latency")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20250616181205.38883-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
For WMI_REQUEST_VDEV_STAT request, firmware might split response into
multiple events dut to buffer limit, hence currently in
ath12k_wmi_fw_stats_process() host waits until all events received. In
case there is no vdev started, this results in that below condition
would never get satisfied
((++ar->fw_stats.num_vdev_recvd) == total_vdevs_started)
consequently the requestor would be blocked until time out.
The same applies to WMI_REQUEST_BCN_STAT request as well due to:
((++ar->fw_stats.num_bcn_recvd) == ar->num_started_vdevs)
Change to check the number of started vdev first: if it is zero, finish
directly; if not, follow the old way.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-4-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently ath12k_wmi_fw_stats_process() is using static variables to count
firmware stat events. Taking num_vdev as an example, if for whatever
reason (say ar->num_started_vdevs is 0 or firmware bug etc.) the following
condition
(++num_vdev) == total_vdevs_started
is not met, is_end is not set thus num_vdev won't be cleared. Next time
when firmware stats is requested again, even if everything is working
fine, failure is expected due to the condition above will never be
satisfied.
The same applies to num_bcn as well.
Change to use non-static counters and reset them each time before firmware
stats is requested.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-3-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath12k_mac_get_fw_stats() is busy polling fw_stats_done flag while waiting
firmware finishing sending all events. This is not good as CPU is
monopolized and kept burning during the wait.
Change to the completion mechanism to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Fixes: e367c924768b ("wifi: ath12k: Request vdev stats from firmware")
Reported-by: Grégoire Stein <gregoire.s93@live.fr>
Closes: https://lore.kernel.org/ath12k/AS8P190MB120575BBB25FCE697CD7D4988763A@AS8P190MB1205.EURP190.PROD.OUTLOOK.COM/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Tested-by: Grégoire Stein <gregoire.s93@live.fr>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-2-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Regarding the firmware stats events handling, the comment in
ath12k_mac_get_fw_stats() says host determines whether all events have been
received based on 'end' tag in TLV. This is wrong as there is no such tag
at all, actually host makes the decision totally by itself based on the
stats type and active pdev/vdev counts etc.
Fix it to correctly reflect the logic.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250612-ath12k-fw-fixes-v1-1-12f594f3b857@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In case of ML connection, currently all useful links are activated at
ASSOC stage:
ieee80211_set_active_links(vif, ieee80211_vif_usable_links(vif))
this results in firmware crash when the number of links activated on the
same device is more than supported.
Since firmware supports activating at most 2 links for a ML connection,
to avoid firmware crash, host needs to select 2 links out of the useful
links. As the assoc link has already been chosen, the question becomes
how to determine partner links. A straightforward principle applied
here is that the resulted combination should achieve the best throughput.
For that purpose, ideally various factors like bandwidth, RSSI etc should
be considered. But that would be too complicate. To make it easy, the
choice is to only take hardware modes into consideration.
The SBS (single band simultaneously) mode frequency range covers 5 GHz
and 6 GHz bands. In this mode, the two individual MACs are both active,
with one working on 5g-high band and the other on 5g-low band (from
hardware perspective 5 GHz and 6 GHz bands are referred to as a 'large'
single 5 GHz band). The DBS (dual band simultaneously) mode covers 2 GHz
band and the 'large' 5 GHz band, with one MAC working on 2 GHz band and
the other working on 5 GHz band or 6 GHz band. Since 5,6 GHz bands could
provide higher bandwidth than 2 GHz band, the preference is given to SBS
mode. Other hardware modes results in only one working MAC at any given
time, so it is chosen only when both SBS are DBS are not possible.
For each hardware mode, if there are more than one partner candidate,
just choose the first one.
For now only single device MLO case is handled as it is easy. Other cases
could be addressed in the future.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-6-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In case of two links established on the same device in an ML connection,
depending on device's hardware mode capability, it is possible that both
links fall on the same MAC. Currently, no specific action is taken to
address this but just keep both links active. However this would result
in lower throughput compared to even one link, because switching between
these two links on the resulted MAC significantly impacts throughput.
Check if both links fall in the frequency range of a single MAC. If
so, send WMI_MLO_LINK_SET_ACTIVE_CMDID command to firmware such that
firmware can deactivate one of them. Note the decision of which link
getting deactivated is made by firmware, host only sends the vdev
lists.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-5-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add WMI_MLO_LINK_SET_ACTIVE_CMDID command. This command allows host to
send required link information to firmware such that firmware can make
decision on activating/deactivating links in various scenarios.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-4-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Previous patches parse and save hardware MAC frequency range information
in ath12k_svc_ext_info structure. Such range represents hardware
capability hence needs to be updated based on host information, e.g. guard
the range based on host's low/high boundary.
So update frequency range. The updated range is saved in
ath12k_hw_mode_info structure and would be used when doing vdev activation
and link selection in following patches.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-3-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
WMI_SERVICE_READY_EXT2_EVENTID event
Firmware sends the boundary between lower and higher bands in
ath12k_wmi_dbs_or_sbs_cap_params structure embedded in
WMI_SERVICE_READY_EXT2_EVENTID event. The boundary is needed when
updating frequency range in the following patch. So parse and save
it for later use. Note ath12k_wmi_dbs_or_sbs_cap_params is placed
after some other structures, so placeholders for them are added
as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-2-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
WMI_SERVICE_READY_EXT_EVENTID event for later use
WLAN hardware might support various hardware modes such as DBS (dual
band simultaneously), SBS (single band simultaneously) and DBS_OR_SBS
etc, see enum wmi_host_hw_mode_config_type. Firmware advertises actual
supported modes in WMI_SERVICE_READY_EXT_EVENTID event. For each mode,
firmware advertises frequency range each hardware MAC can operate on.
In MLO case such information is necessary during vdev activation and
link selection (which is done in following patches), so add a new
structure ath12k_svc_ext_info to ath12k_wmi_base, then parse and save
those information to it for later use.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-1-54a29e7a3a88@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When the ath12k driver is built without CONFIG_ATH12K_DEBUG, the
recently refactored stats code can cause any user space application
(such at NetworkManager) to consume 100% CPU for 3 seconds, every time
stats are read.
Commit 'b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of
debugfs")' moved ath12k_debugfs_fw_stats_request() out of debugfs, by
merging the additional logic into ath12k_mac_get_fw_stats().
Among the added responsibility of ath12k_mac_get_fw_stats() was the
busy-wait for `fw_stats_done`.
Signalling of `fw_stats_done` happens when one of the
WMI_REQUEST_PDEV_STAT, WMI_REQUEST_VDEV_STAT, and WMI_REQUEST_BCN_STAT
messages are received, but the handling of the latter two commands remained
in the debugfs code. As `fw_stats_done` isn't signalled, the calling
processes will spin until the timeout (3 seconds) is reached.
Moving the handling of these two additional responses out of debugfs
resolves the issue.
Fixes: b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20250609-ath12k-fw-stats-done-v1-1-2b3624656697@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Since taprio’s taprio_dev_notifier() isn’t protected by an
RCU read-side critical section, a race with advance_sched()
can lead to a use-after-free.
Adding rcu_read_lock() inside taprio_dev_notifier() prevents this.
Fixes: fed87cc6718a ("net/sched: taprio: automatically calculate queueMaxSDU based on TC gate durations")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/aEzIYYxt0is9upYG@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
ptp_vclock fixes
While I was intending to test something else related to PTP in net-next
I noticed any time I would run ptp4l on an interface, the kernel would
print "ptp: physical clock is free running" and ptp4l would exit with an
error code.
I then found Jeongjun Park's patch and subsequent explanation provided
to Jakub's question, specifically related to the code which introduced
the breakage I am seeing.
https://lore.kernel.org/netdev/CAO9qdTEjQ5414un7Yw604paECF=6etVKSDSnYmZzZ6Pg3LurXw@mail.gmail.com/
I had to look at the original issue that prompted Jeongjun Park's patch,
and provide an alternative fix for it. Patch 1/2 in this set contains a
logical revert plus the alternative fix, squashed into one.
Patch 2/2 fixes another issue which was confusing during debugging/
characterization, namely: "ok, the kernel clearly thinks that any
physical clock is free-running after this change (despite there being no
vclocks), but why would ptp4l fail to create the clock altogether? Why
not just fail to adjust it?"
By reverting (locally) Jeongjun Park's commit, I could reproduce
the reported lockdep splat using the commands from patch 1/2's commit
message, and this goes away with the reworked implementation.
====================
Link: https://patch.msgid.link/20250613174749.406826-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
clocks
There is a bug in ptp_clock_adjtime() which makes it refuse the
operation even if we just want to read the current clock dialed
frequency, not modify anything (tx->modes == 0). That should be possible
even if the clock is free-running. For context, the kernel UAPI is the
same for getting and setting the frequency of a POSIX clock.
For example, ptp4l errors out at clock_create() -> clockadj_get_freq()
-> clock_adjtime() time, when it should logically only have failed on
actual adjustments to the clock, aka if the clock was configured as
slave. But in master mode it should work.
This was discovered when examining the issue described in the previous
commit, where ptp_clock_freerun() returned true despite n_vclocks being
zero.
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250613174749.406826-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
What is broken
--------------
ptp4l, and any other application which calls clock_adjtime() on a
physical clock, is greeted with error -EBUSY after commit 87f7ce260a3c
("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()").
Explanation for the breakage
----------------------------
The blamed commit was based on the false assumption that
ptp_vclock_in_use() callers already test for n_vclocks prior to calling
this function.
This is notably incorrect for the code path below, in which there is, in
fact, no n_vclocks test:
ptp_clock_adjtime()
-> ptp_clock_freerun()
-> ptp_vclock_in_use()
The result is that any clock adjustment on any physical clock is now
impossible. This is _despite_ there not being any vclock over this
physical clock.
$ ptp4l -i eno0 -2 -P -m
ptp4l[58.425]: selected /dev/ptp0 as PTP clock
[ 58.429749] ptp: physical clock is free running
ptp4l[58.431]: Failed to open /dev/ptp0: Device or resource busy
failed to create a clock
$ cat /sys/class/ptp/ptp0/n_vclocks
0
The patch makes the ptp_vclock_in_use() function say "if it's not a
virtual clock, then this physical clock does have virtual clocks on
top".
Then ptp_clock_freerun() uses this information to say "this physical
clock has virtual clocks on top, so it must stay free-running".
Then ptp_clock_adjtime() uses this information to say "well, if this
physical clock has to be free-running, I can't do it, return -EBUSY".
Simply put, ptp_vclock_in_use() cannot be simplified so as to remove the
test whether vclocks are in use.
What did the blamed commit intend to fix
----------------------------------------
The blamed commit presents a lockdep warning stating "possible recursive
locking detected", with the n_vclocks_store() and ptp_clock_unregister()
functions involved.
The recursive locking seems this:
n_vclocks_store()
-> mutex_lock_interruptible(&ptp->n_vclocks_mux) // 1
-> device_for_each_child_reverse(..., unregister_vclock)
-> unregister_vclock()
-> ptp_vclock_unregister()
-> ptp_clock_unregister()
-> ptp_vclock_in_use()
-> mutex_lock_interruptible(&ptp->n_vclocks_mux) // 2
The issue can be triggered by creating and then deleting vclocks:
$ echo 2 > /sys/class/ptp/ptp0/n_vclocks
$ echo 0 > /sys/class/ptp/ptp0/n_vclocks
But note that in the original stack trace, the address of the first lock
is different from the address of the second lock. This is because at
step 1 marked above, &ptp->n_vclocks_mux is the lock of the parent
(physical) PTP clock, and at step 2, the lock is of the child (virtual)
PTP clock. They are different locks of different devices.
In this situation there is no real deadlock, the lockdep warning is
caused by the fact that the mutexes have the same lock class on both the
parent and the child. Functionally it is fine.
Proposed alternative solution
-----------------------------
We must reintroduce the body of ptp_vclock_in_use() mostly as it was
structured prior to the blamed commit, but avoid the lockdep warning.
Based on the fact that vclocks cannot be nested on top of one another
(ptp_is_attribute_visible() hides n_vclocks for virtual clocks), we
already know that ptp->n_vclocks is zero for a virtual clock. And
ptp->is_virtual_clock is a runtime invariant, established at
ptp_clock_register() time and never changed. There is no need to
serialize on any mutex in order to read ptp->is_virtual_clock, and we
take advantage of that by moving it outside the lock.
Thus, virtual clocks do not need to acquire &ptp->n_vclocks_mux at
all, and step 2 in the code walkthrough above can simply go away.
We can simply return false to the question "ptp_vclock_in_use(a virtual
clock)".
Other notes
-----------
Releasing &ptp->n_vclocks_mux before ptp_vclock_in_use() returns
execution seems racy, because the returned value can become stale as
soon as the function returns and before the return value is used (i.e.
n_vclocks_store() can run any time). The locking requirement should
somehow be transferred to the caller, to ensure a longer life time for
the returned value, but this seems out of scope for this severe bug fix.
Because we are also fixing up the logic from the original commit, there
is another Fixes: tag for that.
Fixes: 87f7ce260a3c ("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()")
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250613174749.406826-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
