summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-27scsi: core: Run queue when state is set to running after being blockedzhengbin
Use dd to test a SCSI device: 1. echo "blocked" >/sys/block/sda/device/state 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo "running" >/sys/block/sda/device/state dd should finish this work after step 3, but it hangs. After step2, the call chain is this: blk_mq_dispatch_rq_list-->scsi_queue_rq-->prep_to_mq prep_to_mq will return BLK_STS_RESOURCE, and scsi_queue_rq will transition it to BLK_STS_DEV_RESOURCE which means that driver can guarantee that IO dispatch will be triggered in future when the resource is available. Need to follow the rule if we set the device state to running. [mkp: tweaked commit description and code comment as suggested by Bart] Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
2019-03-27arm64: replace memblock_alloc_low with memblock_allocChen Zhou
If we use "crashkernel=Y[@X]" and the start address is above 4G, the arm64 kdump capture kernel may call memblock_alloc_low() failure in request_standard_resources(). Replacing memblock_alloc_low() with memblock_alloc(). [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x0000000040650000 reserved size = 0x0000000004db7f39 [ 0.000000] memory.cnt = 0x6 [ 0.000000] memory[0x0] [0x00000000395f0000-0x000000003968ffff], 0x00000000000a0000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x1] [0x0000000039730000-0x000000003973ffff], 0x0000000000010000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x2] [0x0000000039780000-0x000000003986ffff], 0x00000000000f0000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x3] [0x0000000039890000-0x0000000039d0ffff], 0x0000000000480000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x4] [0x000000003ed00000-0x000000003ed2ffff], 0x0000000000030000 bytes on node 0 flags: 0x4 [ 0.000000] memory[0x5] [0x0000002040000000-0x000000207fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0 [ 0.000000] reserved.cnt = 0x7 [ 0.000000] reserved[0x0] [0x0000002040080000-0x0000002041c4dfff], 0x0000000001bce000 bytes flags: 0x0 [ 0.000000] reserved[0x1] [0x0000002041c53000-0x0000002042c203f8], 0x0000000000fcd3f9 bytes flags: 0x0 [ 0.000000] reserved[0x2] [0x000000207da00000-0x000000207dbfffff], 0x0000000000200000 bytes flags: 0x0 [ 0.000000] reserved[0x3] [0x000000207ddef000-0x000000207fbfffff], 0x0000000001e11000 bytes flags: 0x0 [ 0.000000] reserved[0x4] [0x000000207fdf2b00-0x000000207fdfc03f], 0x0000000000009540 bytes flags: 0x0 [ 0.000000] reserved[0x5] [0x000000207fdfd000-0x000000207ffff3ff], 0x0000000000202400 bytes flags: 0x0 [ 0.000000] reserved[0x6] [0x000000207ffffe00-0x000000207fffffff], 0x0000000000000200 bytes flags: 0x0 [ 0.000000] Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-next-20190321+ #4 [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x0/0x188 [ 0.000000] show_stack+0x24/0x30 [ 0.000000] dump_stack+0xa8/0xcc [ 0.000000] panic+0x14c/0x31c [ 0.000000] setup_arch+0x2b0/0x5e0 [ 0.000000] start_kernel+0x90/0x52c [ 0.000000] ---[ end Kernel panic - not syncing: request_standard_resources: Failed to allocate 384 bytes ]--- Link: https://www.spinics.net/lists/arm-kernel/msg715293.html Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-03-27ceph: fix use-after-free on symlink traversalAl Viro
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-28firmware: vpd: Drop __iomem usage for memremap() memoryStephen Boyd
memremap() doesn't return an iomem pointer, so we can just use memcpy() and drop the __iomem annotation here. This silences a sparse warning. Cc: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28w1: ds2482: cosmetic fixes after 54865314f5a1Mariusz Bialonczyk
We have a helper function ds2482_calculate_config() which is calculating the config value, so just use it instead of passing the same variable in all calls to this function. Also fixes the placement of module parameters to match with: 50fa2951bd74 (w1: Organize driver source to natural/common order) by Andrew F. Davis Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Andrew F. Davis <afd@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28char: hpet: fix a missing check of ioremapKangjie Lu
Check if ioremap fails, and if so, return AE_ERROR. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28sgi-xpc: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/misc/sgi-xp/xpc_uv.c: In function ‘xpc_handle_activate_mq_msg_uv’: drivers/misc/sgi-xp/xpc_uv.c:573:3: warning: this statement may fall through [-Wimplicit-fallthrough=] xpc_wakeup_channel_mgr(part); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/misc/sgi-xp/xpc_uv.c:575:2: note: here case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Robin Holt<robinmholt@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28uio: uio_fsl_elbc_gpcm: Make dev_attr_reg_br and dev_attr_reg_or staticYueHaibing
Fix sparse warnings: drivers/uio/uio_fsl_elbc_gpcm.c:71:1: warning: symbol 'dev_attr_reg_br' was not declared. Should it be static? drivers/uio/uio_fsl_elbc_gpcm.c:72:1: warning: symbol 'dev_attr_reg_or' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org? Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28misc: fastrpc: increase max init file size to 64 MBSrinivas Kandagatla
In some cases where Neural Processing is required the size of init process exceeds default size of 2MB, increase this size to 64MB which is required for QCS404 CDSP Neural Processing. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28misc: fastrpc: fix remote page size calculationSrinivas Kandagatla
Remote page size should be calculated based on address and size, fix this! Without this we will endup with one page less in cases where the buffer is across 3 pages. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Reported-by: Krishnaiah Tadakamalla <ktadakam@qti.qualcomm.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28misc: fastrpc: take into account of overlapping buffersSrinivas Kandagatla
Argument buffers that are passed could be derived from a big buffer, and some of the arguments buffers could overlap each other. Take care of such instanaces. This is optimization that DSP expects while sending buffers which overlap. So make the DSP happy doing it. Without which DSP seems to crash. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28misc: fastrpc: consider address offset before sending to DSPSrinivas Kandagatla
While passing address phy address to DSP, take care of the offset calculated from virtual address vma. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28misc: fastrpc: use correct spinlock variantSrinivas Kandagatla
context spin lock can be interrupted from callback path so use correct spinlock so that we do not hit spinlock recursion. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28misc: fastrpc: make sure memory read and writes are visibleSrinivas Kandagatla
dma_alloc_coherent buffers could have writes queued in store buffers so commit them before sending buffer to DSP using correct dma barriers. Same with vice-versa. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28misc: fastrpc: Fix a possible double freeThierry Escande
This patch fixes the error exit path of fastrpc_init_create_process(). If the DMA allocation or the DSP invoke fails the fastrpc_map was freed but not removed from the mapping list leading to a double free once the mapping list is emptied in fastrpc_device_release(). [srinivas kandagatla]: Cleaned up error path labels and reset init mem to NULL after free Fixes: d73f71c7c6ee("misc: fastrpc: Add support for create remote init process") Signed-off-by: Thierry Escande <thierry.escande@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28misc: fastrpc: Avoid free of DMA buffer in interrupt contextThierry Escande
When the remote DSP invocation is interrupted by the user, the associated DMA buffer can be freed in interrupt context causing a kernel BUG. This patch adds a worker thread associated to the fastrpc context. It is scheduled in the rpmsg callback to decrease its refcount out of the interrupt context. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Signed-off-by: Thierry Escande <thierry.escande@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28misc: rtsx: clean up some indentingDan Carpenter
These lines weren't indented far enough. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28mei: adjust the copyright notice in the files.Tomas Winkler
Use unified version of the copyright notice in the files Update copyright years according the year the files were touched, except this patch and SPDX conversions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28mei/hdcp: Fix SPDX identifiersTomas Winkler
1. Remove redundant parentheses around single license 2. Fix the license to GPL-2.0 and not GPL-2.0+ in mei_hdcp.h Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28nfc/mei: convert to SPDX license tagsTomas Winkler
Replace boiler plate licenses texts with the SPDX license identifiers in the mei nfc files header. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28mei: convert to SPDX license tagsTomas Winkler
Replace boiler plate licenses texts with the SPDX license identifiers in the mei files header. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28mei: add missing SPDX tag to mei KconfigTomas Winkler
Add SPDX tag with GPLv2 license to mei Kconfig. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.xHans de Goede
VirtualBox 6.0.x has a new feature where the guest kernel driver passes info about the origin of the request (e.g. userspace or kernelspace) to the hypervisor. If we do not pass this information then when running the 6.0.x userspace guest-additions tools on a 6.0.x host, some requests will get denied with a VERR_VERSION_MISMATCH error, breaking vboxservice.service and the mounting of shared folders marked to be auto-mounted. This commit implements passing the requestor info to the host, fixing this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28parport_cs: Fix memory leak in parport_configYueHaibing
parport_probe() alloc parport device 'info', but while parport_config failed it does not free it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty: fix NULL pointer issue when tty_port ops is not setFabien Dessenne
Unlike 'client_ops' which is initialized to 'default_client_ops', the port operations 'ops' may be left to NULL. Check the 'ops' value before checking the 'ops->x' value. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdbocWentao Wang
Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd453168643 ("kgdboc: Fix restrict error") Signed-off-by: Wentao Wang <witallwang@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28dt-bindings: serial: Add compatible for Mediatek MT8183Erin Lo
This adds dt-binding documentation of uart for Mediatek MT8183 SoC Platform. Signed-off-by: Erin Lo <erin.lo@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stoppedRazvan Stefanescu
In half-duplex operation, RX should be started after TX completes. If DMA is used, there is a case when the DMA transfer completes but the TX FIFO is not emptied, so the RX cannot be restarted just yet. Use a boolean variable to store this state and rearm TX interrupt mask to be signaled again that the transfer finished. In interrupt transmit handler this variable is used to start RX. A warning message is generated if RX is activated before TX fifo is cleared. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty/serial: atmel: Add is_half_duplex helperRazvan Stefanescu
Use a helper function to check that a port needs to use half duplex communication, replacing several occurrences of multi-line bit checking. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Cc: stable <stable@vger.kernel.org> Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28usb: u132-hcd: fix resource leakMukesh Ojha
if platform_driver_register fails, cleanup the allocated resource gracefully. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28usb: cdc-acm: fix race during wakeup blocking TX trafficRomain Izard
When the kernel is compiled with preemption enabled, the URB completion handler can run in parallel with the work responsible for waking up the tty layer. If the URB handler sets the EVENT_TTY_WAKEUP bit during the call to tty_port_tty_wakeup() to signal that there is room for additional input, it will be cleared at the end of this call. As a result, TX traffic on the upper layer will be blocked. This can be seen with a kernel configured with CONFIG_PREEMPT, and a fast modem connected with PPP running over a USB CDC-ACM port. Use test_and_clear_bit() instead, which ensures that each wakeup requested by the URB completion code will trigger a call to tty_port_tty_wakeup(). Fixes: 1aba579f3cf5 cdc-acm: handle read pipe errors Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27x86/realmode: Don't leak the trampoline kernel addressMatteo Croce
Since commit ad67b74d2469 ("printk: hash addresses printed with %p") at boot "____ptrval____" is printed instead of the trampoline addresses: Base memory trampoline at [(____ptrval____)] 99000 size 24576 Remove the print as we don't want to leak kernel addresses and this statement is not needed anymore. Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190326203046.20787-1-mcroce@redhat.com
2019-03-27i2c: wmt: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: sun6i-p2wi: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-27i2c: stu300: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: mt65xx: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: iop3xx: make bindings file name match the driverWolfram Sang
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27x86/boot: Fix incorrect ifdeffery scopeBaoquan He
The declarations related to immovable memory handling are out of the BOOT_COMPRESSED_MISC_H #ifdef scope, wrap them inside. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Chao Fan <fanc.fnst@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190304055546.18566-1-bhe@redhat.com
2019-03-27gpio: mockup: fix debugfs readBartosz Golaszewski
The debugfs read callback must advance ppos or users using read() on the file descriptor will never get the EOL. This wasn't spotted before as I was using busybox cat for testing which uses sendfile() internally and only noticed it now when switched to cat from coreutils. Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27Revert "gpio: use new gpio_set_config() helper in more places"Andrew Jeffery
gpio-aspeed implements support for PIN_CONFIG_INPUT_DEBOUNCE. As of v5.1-rc1 we're seeing the following when booting a Romulus BMC kernel: > [ 21.373137] ------------[ cut here ]------------ > [ 21.374545] WARNING: CPU: 0 PID: 1 at drivers/gpio/gpio-aspeed.c:834 unregister_allocated_timer+0x38/0x94 > [ 21.376181] No timer allocated to offset 74 > [ 21.377672] CPU: 0 PID: 1 Comm: swapper Not tainted 5.1.0-rc1-dirty #6 > [ 21.378800] Hardware name: Generic DT based system > [ 21.379965] Backtrace: > [ 21.381024] [<80107d44>] (dump_backtrace) from [<80107f78>] (show_stack+0x20/0x24) > [ 21.382713] r7:8038b720 r6:00000009 r5:00000000 r4:87897c64 > [ 21.383815] [<80107f58>] (show_stack) from [<80656398>] (dump_stack+0x20/0x28) > [ 21.385042] [<80656378>] (dump_stack) from [<80115f1c>] (__warn.part.3+0xb4/0xdc) > [ 21.386253] [<80115e68>] (__warn.part.3) from [<80115fb0>] (warn_slowpath_fmt+0x6c/0x90) > [ 21.387471] r6:00000342 r5:807f8758 r4:80a07008 > [ 21.388278] [<80115f48>] (warn_slowpath_fmt) from [<8038b720>] (unregister_allocated_timer+0x38/0x94) > [ 21.389809] r3:0000004a r2:807f8774 > [ 21.390526] r7:00000000 r6:0000000a r5:60000153 r4:0000004a > [ 21.391601] [<8038b6e8>] (unregister_allocated_timer) from [<8038baac>] (aspeed_gpio_set_config+0x330/0x48c) > [ 21.393248] [<8038b77c>] (aspeed_gpio_set_config) from [<803840b0>] (gpiod_set_debounce+0xe8/0x114) > [ 21.394745] r10:82ee2248 r9:00000000 r8:87b63a00 r7:00001388 r6:87947320 r5:80729310 > [ 21.396030] r4:879f64a0 > [ 21.396499] [<80383fc8>] (gpiod_set_debounce) from [<804b4350>] (gpio_keys_probe+0x69c/0x8e0) > [ 21.397715] r7:845d94b8 r6:00000001 r5:00000000 r4:87b63a1c > [ 21.398618] [<804b3cb4>] (gpio_keys_probe) from [<8040eeec>] (platform_dev_probe+0x44/0x80) > [ 21.399834] r10:00000003 r9:80a3a8b0 r8:00000000 r7:00000000 r6:80a7f9dc r5:80a3a8b0 > [ 21.401163] r4:8796bc10 > [ 21.401634] [<8040eea8>] (platform_drv_probe) from [<8040d0d4>] (really_probe+0x208/0x3dc) > [ 21.402786] r5:80a7f8d0 r4:8796bc10 > [ 21.403547] [<8040cecc>] (really_probe) from [<8040d7a4>] (driver_probe_device+0x130/0x170) > [ 21.404744] r10:0000007b r9:8093683c r8:00000000 r7:80a07008 r6:80a3a8b0 r5:8796bc10 > [ 21.405854] r4:80a3a8b0 > [ 21.406324] [<8040d674>] (driver_probe_device) from [<8040da8c>] (device_driver_attach+0x68/0x70) > [ 21.407568] r9:8093683c r8:00000000 r7:80a07008 r6:80a3a8b0 r5:00000000 r4:8796bc10 > [ 21.408877] [<8040da24>] (device_driver_attach) from [<8040db14>] (__driver_attach+0x80/0x150) > [ 21.410327] r7:80a07008 r6:8796bc10 r5:00000001 r4:80a3a8b0 > [ 21.411294] [<8040da94>] (__driver_attach) from [<8040b20c>] (bus_for_each_dev+0x80/0xc4) > [ 21.412641] r7:80a07008 r6:8040da94 r5:80a3a8b0 r4:87966f30 > [ 21.413580] [<8040b18c>] (bus_for_each_dev) from [<8040dc0c>] (driver_attach+0x28/0x30) > [ 21.414943] r7:00000000 r6:87b411e0 r5:80a33fc8 r4:80a3a8b0 > [ 21.415927] [<8040dbe4>] (driver_attach) from [<8040bbf0>] (bus_add_driver+0x14c/0x200) > [ 21.417289] [<8040baa4>] (bus_add_driver) from [<8040e2b4>] (driver_register+0x84/0x118) > [ 21.418652] r7:80a60ae0 r6:809226b8 r5:80a07008 r4:80a3a8b0 > [ 21.419652] [<8040e230>] (driver_register) from [<8040fc28>] (__platform_driver_register+0x3c/0x50) > [ 21.421193] r5:80a07008 r4:809525f8 > [ 21.421990] [<8040fbec>] (__platform_driver_register) from [<809226d8>] (gpio_keys_init+0x20/0x28) > [ 21.423447] [<809226b8>] (gpio_keys_init) from [<8090128c>] (do_one_initcall+0x80/0x180) > [ 21.424886] [<8090120c>] (do_one_initcall) from [<80901538>] (kernel_init_freeable+0x1ac/0x26c) > [ 21.426354] r8:80a60ae0 r7:80a60ae0 r6:8093685c r5:00000008 r4:809525f8 > [ 21.427579] [<8090138c>] (kernel_init_freeable) from [<8066d9a0>] (kernel_init+0x18/0x11c) > [ 21.428819] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8066d988 > [ 21.429947] r4:00000000 > [ 21.430415] [<8066d988>] (kernel_init) from [<801010e8>] (ret_from_fork+0x14/0x2c) > [ 21.431666] Exception stack(0x87897fb0 to 0x87897ff8) > [ 21.432877] 7fa0: 00000000 00000000 00000000 00000000 > [ 21.434446] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > [ 21.436052] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 > [ 21.437308] r5:8066d988 r4:00000000 > [ 21.438102] ---[ end trace d7d7ac3a80567d0e ]--- We only hit unregister_allocated_timer() if the argument to aspeed_gpio_set_config() is 0, but we can't be calling through gpiod_set_debounce() from gpio_keys_probe() unless the gpio-keys button has a non-zero debounce interval. Commit 6581eaf0e890 ("gpio: use new gpio_set_config() helper in more places") spreads the use of gpio_set_config() to the debounce and transitory state configuration paths. The implementation of gpio_set_config() is: > static int gpio_set_config(struct gpio_chip *gc, unsigned offset, > enum pin_config_param mode) > { > unsigned long config = { PIN_CONF_PACKED(mode, 0) }; > > return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP; > } Here it packs its own config value with a fixed argument of 0; this is incorrect behaviour for implementing the debounce and transitory functions, and the debounce and transitory gpio_set_config() call-sites now have an undetected type mismatch as they both already pack their own config parameter (i.e. what gets passed is not an `enum pin_config_param`). Indeed this can be seen in the small diff for 6581eaf0e890: > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c > index de595fa31a1a..1f239aac43df 100644 > --- a/drivers/gpio/gpiolib.c > +++ b/drivers/gpio/gpiolib.c > @@ -2725,7 +2725,7 @@ int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce) > } > > config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce); > - return chip->set_config(chip, gpio_chip_hwgpio(desc), config); > + return gpio_set_config(chip, gpio_chip_hwgpio(desc), config); > } > EXPORT_SYMBOL_GPL(gpiod_set_debounce); > > @@ -2762,7 +2762,7 @@ int gpiod_set_transitory(struct gpio_desc *desc, bool transitory) > packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE, > !transitory); > gpio = gpio_chip_hwgpio(desc); > - rc = chip->set_config(chip, gpio, packed); > + rc = gpio_set_config(chip, gpio, packed); > if (rc == -ENOTSUPP) { > dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n", > gpio); Revert commit 6581eaf0e890 ("gpio: use new gpio_set_config() helper in more places") to restore correct behaviour for gpiod_set_debounce() and gpiod_set_transitory(). Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27drm/i915/selftests: Fix an IS_ERR() vs NULL checkDan Carpenter
The live_context() function returns error pointers. It never returns NULL. Fixes: 9c1477e83e62 ("drm/i915/selftests: Exercise adding requests to a full GGTT") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190326050843.GA20038@kadam (cherry picked from commit 602cbe8efc523ba56e1f41e8f74c7aa835672593) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-03-27powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexesGautham R. Shenoy
In cpu_to_drc_index() in the case when FW_FEATURE_DRC_INFO is absent, we currently use of_read_property() to obtain the pointer to the array corresponding to the property "ibm,drc-indexes". The elements of this array are of type __be32, but are accessed without any conversion to the OS-endianness, which is buggy on a Little Endian OS. Fix this by using of_property_read_u32_index() accessor function to safely read the elements of the array. Fixes: e83636ac3334 ("pseries/drc-info: Search DRC properties for CPU indexes") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> [mpe: Make the WARN_ON a WARN_ON_ONCE so it's not retriggerable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-26Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data() - fix mount/umount race in nlmclnt. - NFSv4.1 don't free interrupted slot on open Bugfixes: - Don't let RPC_SOFTCONN tasks time out if the transport is connected - Fix a typo in nfs_init_timeout_values() - Fix layoutstats handling during read failovers - fix uninitialized variable warning" * tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: fix uninitialized variable warning pNFS/flexfiles: Fix layoutstats handling during read failovers NFS: Fix a typo in nfs_init_timeout_values() SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected NFSv4.1 don't free interrupted slot on open NFS: fix mount/umount race in nlmclnt. NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
2019-03-26SUNRPC: fix uninitialized variable warningAlakesh Haloi
Avoid following compiler warning on uninitialized variable net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’: net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized] return read; ^~~~ net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] return ret < 0 ? ret : read; ~~~~~~~~~~~~~~^~~~~~ Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-26leds: trigger: netdev: fix refcnt leak on interface renameRafał Miłecki
Renaming a netdev-trigger-tracked interface was resulting in an unbalanced dev_hold(). Example: > iw phy phy0 interface add foo type __ap > echo netdev > trigger > echo foo > device_name > ip link set foo name bar > iw dev bar del [ 237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1 [ 247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1 [ 257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1 Above problem was caused by trigger checking a dev->name which obviously changes after renaming an interface. It meant missing all further events including the NETDEV_UNREGISTER which is required for calling dev_put(). This change fixes that by: 1) Comparing device struct *address* for notification-filtering purposes 2) Dropping unneeded NETDEV_CHANGENAME code (no behavior change) Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-26dpaa2-eth: fix race condition with bql frame accountingIoana Ciornei
It might happen that Tx conf acknowledges a frame before it was subscribed in bql, as subscribing was previously done after the enqueue operation. This patch moves the netdev_tx_sent_queue call before the actual frame enqueue, so that this can never happen. Fixes: 569dac6a5a0d ("dpaa2-eth: bql support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26chelsio: use BUG() instead of BUG_ON(1)Arnd Bergmann
clang warns about possible bugs in a dead code branch after BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled: drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here return buf_size; ^~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning int buf_size; ^ = 0 Use BUG() here to create simpler code that clang understands correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: devlink: skip info_get op call if it is not defined in dumpitJiri Pirko
In dumpit, unlike doit, the check for info_get op being defined is missing. Add it and avoid null pointer dereference in case driver does not define this op. Fixes: f9cf22882c60 ("devlink: add device information API") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: phy: bcm54xx: Encode link speed and activity into LEDsVladimir Oltean
Previously the green and amber LEDs on this quad PHY were solid, to indicate an encoding of the link speed (10/100/1000). This keeps the LEDs always on just as before, but now they flash on Rx/Tx activity. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 03:30:28 +0000