summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-02drm/exynos: hdmi: consider legacy dt bindingInki Dae
This patch considers legacy dt binding, and resolves the issue that the use of existing dtb is broken. To resove the dt broken issue, this path tries to get legacy dt nodes from existing dtb directly prior to getting new dt nodes. Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-06-02drm/exynos: restore core HDMI settingsShirish S
In DVI mode the video preamble and Guard band should be disabled whereas it should be applied in HDMI mode, the re-applying of preamble and guard band was missing, which resulted in display failures when switched to HDMI mode from DVI mode. This patch ensures the setting is applied in HDMI mode. Signed-off-by: Shirish S <s.shirish@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: hdmi: remove unnecessary dedicated i2c driversSeung-Woo Kim
The i2c drivers for ddc and hdmiphy are already removed from build and instead, i2c clients registered via devicetree are used. So this patch removes the unnecessary i2c drivers. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: enable support for exynos5420 hdmi deviceRahul Sharma
Enable support for hdmi for exynos5420 hdmiphy. Add compatible string in the of_match table. Also added hdmiphy configuration values for exynos5420. Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Shirish S <s.shirish@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: add support for apb mapped phys in hdmi driverRahul Sharma
Previous SoCs have hdmi phys which are accessible through dedicated i2c lines. Newer SoCs have Apb mapped hdmi phys. Hdmi driver is modified to support apb mapped phys. Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: remove unnecessary read for phy configuration valuesRahul Sharma
Cleaning up unnecessary i2c read call after hdmiphy configuration. This check is redundant since check for hdmiphy pll lock status confirms the correct settings for phy. Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: replace hdmi reset with hdmi disableRahul Sharma
Before setting the core and timing generation registers, hdmi driver resets the whole hdmi hardware, which also resets the audio related registers. Hdmi reset is replaced by hdmi disable which is called just before setting the core and timing registers. It also ensure that audio settings are not changed. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Shirish S <s.shirish@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: Read hpd gpio in is_connected callbackSean Paul
This patch adds a gpio read of hpd during the is_connected callback. This fixes the case where hdmi is off going into suspend and the cable is plugged in while suspended. In this case, the hpd interrupt does not fire and is_connected will return false. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: hdmi: remove unnecessary memsetDaniel Kurtz
Our resources were just zalloc'ed as part of hdata. They are already 0. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: check for null pointers in error handlingPaul Taysom
Smatch error from arm build: drivers/gpu/drm/exynos/ exynos_hdmi.c:2374 hdmi_probe() error: potential NULL dereference 'hdata->hdmiphy_port'. Added check for hdata->hdmiphy_port that it is not NULL. Signed-off-by: Paul Taysom <taysom@chromium.org> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: Debounce HDMI hotplug interruptsSean Paul
This patch debounces hotplug interrupts generated by the HDMI hotplug gpio. The reason this is needed is that we get multiple (5) interrupts every time a monitor is inserted which causes us to needlessly enable and disable the IP block. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: Don't reset hdmiphy on hdmi offSean Paul
This patch removes the hdmiphy reset in hdmi_poweroff. The hdmiphy reset was added to take advantage of exynos clockgating, doing it would gate the entire TV domain. Unfortunately, mixer is included in the TV domain and its vsync interrupts are stopped when TV is gated. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: Fix double locks at PM resumeTakashi Iwai
The recent commit [3ea87855: drm/helper: lock all around force mode restore] introduced drm_modeset_lock_all() in drm_helper_resume_force_mode() itself, while exynos driver takes this lock before calling it. Move the function call outside the lock for avoiding a deadlock. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: dp: Use DPCD defines of drm_dp_helper.hJingoo Han
Use DPCD defines of drm_dp_helper.h; thus, duplicated DPCD defines of exynos_dp_core.h can be removed. Also, DP_TEST_EDID_CHECKSUM define is added to drm_dp_helper.h. There is no functional change. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: update phy settings for RB resolutionsShirish S
This patch updates phy settings of the below mentioned pixel clocks in Exynos5250 and removes support for 88.75MHz, for it is not supported. 71 MHz - 1280x800@60Hz RB 73.25 MHz - 800x600@120Hz RB 115.5 MHz - 1024x768@120Hz RB 119 MHz - 1680x1050@60Hz RB Signed-off-by: Shirish S <s.shirish@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: dp: support hotplug detection via GPIOAndrew Bresticker
Certain bridge chips use a GPIO to indicate the cable status instead of the I_DP_HPD pin. This adds an optional device-tree property, "samsung,hpd-gpio", to the exynos-dp controller which indicates that the specified GPIO should be used for hotplug detection. The GPIO is then set up as an edge-triggered interrupt where the rising edge indicates hotplug-in and the falling edge indicates hotplug-out. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: dsi: remove unnecessary pm interfacesInki Dae
Exynos drm driver is a single driver so pm operation for kms drivers should be done by connector->dpms at top level driver. If kms driver has its own pm interfaces, single driver model would be broken so this patch removes unnecessary pm interfaces from dsi driver. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-06-02drm/exynos: remove unnecessary runtime pm interfacesInki Dae
Exyno drm driver has no real hardware device, and runtime pm operation should be done by sub drivers. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-06-02drm/exynos: separate dpi from fimdAndrzej Hajda
The patch separates dpi related routines from fimd. Changelog v2: - Rename ctx->dpi to ctx->display Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: fix comment to exynos_drm_device_subdrv_prove callInki Dae
subdrv_probe callback of virtual display driver will be called by exynos_drm_device_subdrv_probe() to create crtc and encoder/connector for virtual display driver. So it fixes comments to exynos_drm_device_subdrv probe call. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-06-02drm/exynos: dpi: fix hotplug fail issueInki Dae
When connector is created, if connector->polled is DRM_CONNECTOR_POLL_CONNECT then drm_kms_helper_hotplug_event function isn't called at drm_helper_hpd_irq_event because the function will be called only in case of DRM_CONNECTOR_POLL_HPD. So this patch sets always DRM_CONNECTOR_POLL_HPD flag to connector->polled of parallel panel driver at connector creation. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-06-02drm/exynos: add component framework supportInki Dae
This patch adds component framework support to resolve the probe order issue. Until now, exynos drm had used codes specific to exynos drm to resolve that issue so with this patch, the specific codes are removed. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: modify goto labels to meaningful namesInki Dae
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: fimd: clear channel before enabling iommuAkshu Agrawal
If any fimd channel was already active, initializing iommu will result in a PAGE FAULT (e.e. u-boot could have turned on the display and not disabled it before the kernel starts). This patch checks if any channel is active before initializing iommu and disables it. Signed-off-by: Akshu Agrawal <akshu.a@samsung.com> Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: rotator: add missing bracesJingoo Han
In the case of that only one branch of a conditional statement is a single statement, braces are added to both branches. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: dp: remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: hdmi: make local symbols staticJingoo Han
Make local symbols static, because these are used only in this file. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: fb: make local symbol staticJingoo Han
Make local symbole static, because this is used only in this file. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos: remove DRIVER_HAVE_IRQ featureJoonyoung Shim
Exynos drm driver cannot support DRIVER_HAVE_IRQ feature because it uses driver specific one instead of routine of drm framework to install/uninstall irq handler. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos/fbdev: don't set mode_config.fb_baseDaniel Kurtz
AFAICT, the fb_base of a drm_device's mode_config is never used. It isn't accessed by core drm, it isn't used by fbmem, and it isn't exposed to user space. Furthermore, it is probably supposed to be a physical address, not the dma address mapped to the display controller, so this is just wrong. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-06-02drm/exynos/fbdev: don't set fix.smem/mmio_{start,len}Daniel Kurtz
Kernel access to the eyxnos fbdev framebuffer is via its gem object's kernel mapping (kvaddr, stored in info->screen_base). User space access is provided by mmap(), read() and write() of /dev/fb/fb0. These functions also only use screen_base/screen_size(). Therefore, it is not necessary to set fix->smem_{start,len} or fix->mmio_{start,len} fields. This avoids leaking kernel, physical and dma mapped addresses to user space via the ioctls FBIOGET_VSCREENINFO and FBIOGET_FSCREENINFO. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-05-30drm: add DP MST encoder typeDave Airlie
This adds an encoder type for DP MST encoders. Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-30drm: store encoder name in encoder structJani Nikula
This makes drm_get_encoder_name() thread safe. Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01\ .ptsecurity.ru Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-30drm: store connector name in connector struct (v2)Jani Nikula
This makes drm_get_connector_name() thread safe. [airlied: fix to build.] Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01.ptsecurity.ru Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/dp: Add missing kernel-docThierry Reding
Commit 9dc4056026e0 (drm/dp: let drivers specify the name of the I2C- over-AUX adapter) introduced a new field but didn't add the proper kernel-doc for it. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/armada: use shmem helpers if possibleDavid Herrmann
shmem_read_mapping_page() uses mapping_gfp_mask(mapping) as default gfp mask. No reason to use shmem_read_mapping_page_gfp() directly if we want the default behavior. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/gem: replace misleading commentDavid Herrmann
shmem supports page-relocations during swapin since quite some time. It was implemented in: commit bde05d1ccd512696b09db9dd2e5f33ad19152605 Author: Hugh Dickins <hughd@google.com> Date: Tue May 29 15:06:38 2012 -0700 shmem: replace page if mapping excludes its zone The gem-comment about wrongly placed DMA32 pages is no longer valid. Replace it with a proper comment but keep the BUG_ON() to verify correct shmem behavior. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/edid: Use kmemdup instead of kmalloc + memcpyBenoit Taine
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/memdup.cocci Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/shmobile: Add run-time dependenciesJean Delvare
The shmobile DRM driver is only useful on SuperH and shmobile unless build testing. I am dropping the SuperH dependencies though because the driver doesn't even build there, so in practice it is an arm-only driver for now. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27drm/rcar-du: Add run-time dependenciesJean Delvare
The Renesas R-Car Display Unit driver is only useful on shmobile unless build testing. The LVDS output is useful on an even more reduced hardware set. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27MAINTAINERS: Shovel drivers/gpu/vga/* to DaveDaniel Vetter
DRM is pretty much the main user of this stuff (if we ignore the sysfs interface used by X, i.e. by the same gang of people writing the drm drivers). So shovel it into Dave's responsibility to avoid patches getting lost on lkml. With this get_maintainers will rout vgaarb and switcheroo patches correctly. Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: linux-kernel@vger.kernel.org References: https://lkml.org/lkml/2014/5/25/94 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-27Documentation: drm: describing drm properties exposed by various driversSagar Kamble
Started documenting drm properties for drm drivers. This patch provides information about properties in drm, i915, psb and cdv/gma-500. Information about other properties can be added on top of these. v2: Added description of drm properties in armada, exynos, i2c/ch7006, noveau, omap, qxl, radeon, rcar-du v3: Removed "Property Object" column since it is implementation related. Property type column refined.[Ville's review comments] v4: Removed whitespace warnings and minor nits. [Randy's review comments] v5: Restructured output for ENUM properties v6: Review comments on formatting the table. [Laurent's review comments] v7: Minor restructuring. [Laurent's review comments] Cc: Rob Landley <rob@landley.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Sagar Kamble <sagar.a.kamble@intel.com> Cc: "Purushothaman, Vijay A" <vijay.a.purushothaman@intel.com> Cc: linux-doc@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-26drm/ttm: fix kerneldoc of ttm_bo_createAlexandre Courbot
The kerneldoc header of ttm_bo_create() was referring to another (nonexisting) function and had a few obsolete or incorrect arguments. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-26drm: Add 800x600 (SVGA) screen resolution to the built-in EDIDsDaniel Thompson
The 800x600 (SVGA) screen resolution was lacking in the set of built-in selectable EDID screen resolutions that can be used to repair misbehaving monitor firmware. This patch adds the related data set and expands the documentation. Note that the SVGA bit occupies a different byte to all the existing users of the established timing bits forcing a rework of the ESTABLISHED_TIMINGS_BITS macro. Tested new EDID on an aged (and misbehaving) industrial LCD panel; existing EDIDs still pass edid-decode's checksum checks. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Carsten Emde <C.Emde@osadl.org> Cc: linux-doc@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-26Documentation: fix typos in drm docbookMasanari Iida
Fix spelling typo in DocBook/drm.tmpl Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-26drm: fix typoRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-23drm/dp_helper: add defines for DP 1.2 and MST support. (v2)Dave Airlie
This just adds the defines from the DP 1.2 spec, which we will use later. fix some DP MST to 1.2 MST Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Todd Previte <tprevite@gmail.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com>
2014-05-19Merge branch 'ast-updates' of ssh://people.freedesktop.org/~/linux into drm-nextDave Airlie
Pull in latest updates to AST driver. * 'ast-updates' of ssh://people.freedesktop.org/~/linux: drm/ast: initial DP501 support (v0.2) drm/ast: rename the mindwm/moutdwm and deinline them drm/ast: resync the dram post code with upstream drm/ast: add AST 2400 support. drm/ast: add widescreen + rb modes from X.org driver (v2)
2014-05-19drm/ast: initial DP501 support (v0.2)Dave Airlie
This is the initial attempt at porting the DP501 code from the userspace driver, the firmware file is in http://people.freedesktop.org/~airlied/ast_dp501_fw.bin this should really be exposed as another encoder/connector that is cloneable v0.2: init 3rd tx properly, add scratch reduction of VRAM size backup firmware properly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-19drm/ast: rename the mindwm/moutdwm and deinline themDave Airlie
we'll need these elsewhere for dp501. Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-15 11:28:04 +0000