summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-19hwmon: (it87) Save fan registers in 2-dimensional arrayGuenter Roeck
Also unify fan functions to use the same code for 8 and 16 bit fans. This patch reduces code size by approximately 1,200 bytes on x86_64. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Introduce support for tempX_offset sysfs attributeGuenter Roeck
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Replace macro defining tempX_type sensors with direct definitionsGuenter Roeck
The macro name show_sensor_offset is confusing since it related to the sensor type, not an offset - even more so when we introduce offset attributes later on. Replace it with direct definitions, and replace the show_sensor/set_sensor function names with show_temp_type/set_temp_type. This also resolves a checkpatch error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Save voltage register values in 2-dimensional arrayGuenter Roeck
Reduces code size (more than 600 bytes on x86_64), and gets rid of some checkpatch errors. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Save temperature registers in 2-dimensional arrayGuenter Roeck
Cleaner code, fewer checkpatch errors, and reduced code size (saves more than 500 bytes on x86-64). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (w83627ehf) Get rid of smatch warningsJean Delvare
The smatch static code analyzer complains: drivers/hwmon/w83627ehf.c:911 w83627ehf_update_device() error: buffer overflow 'W83627EHF_REG_TEMP_OFFSET' 3 <= 8 drivers/hwmon/w83627ehf.c:909 w83627ehf_update_device() error: buffer overflow 'data->temp_offset' 3 <= 8 drivers/hwmon/w83627ehf.c:2672 w83627ehf_resume() error: buffer overflow 'W83627EHF_REG_TEMP_OFFSET' 3 <= 8 drivers/hwmon/w83627ehf.c:2673 w83627ehf_resume() error: buffer overflow 'data->temp_offset' 3 <= 8 A deeper analysis of the code shows that these are false positives, as only the lower 3 bits of data->have_temp_offset can be set so the write is never attempted with i >= 3. However this shows that the code isn't very robust and future changes could easily introduce a buffer overflow. So let's add a safety check to prevent that and make smatch happy. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Huewe <PeterHuewe@gmx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2012-12-19hwmon: (w83627hf) Don't touch nonexistent I2C address registersJean Delvare
Only the W83627HF could be accessed through I2C. All other supported chips are LPC-only, so they do not have I2C address registers. Don't write to nonexistent or reserved registers on these chips. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
2012-12-19hwmon: (w83627ehf) Add support for suspendJean Delvare
On suspend some register values are lost, most notably the Value RAM areas but also other limits and settings. Restore them on resume. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net>
2012-12-19hwmon: (w83627hf) Add support for suspendJean Delvare
On suspend some register values are lost, most notably the Value RAM areas but also other limits. Restore them on resume. On top of that, some fixups are needed to work around BIOS bugs, in particular when the BIOS omits running the same initialization sequence on resume that it does after boot. In that case we have to carry initialization over suspend. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net>
2012-12-19hwmon: Fix PCI device reference leak in quirkJean Delvare
Thankfully this only affects systems with one specific south bridge and is most probably harmless unless the hwmon module is heavily cycled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
2012-12-19Merge tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull Xtensa patchset from Chris Zankel: "This contains support of device trees, many fixes, and code clean-ups" * tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linux: (33 commits) xtensa: don't try to build DTB when OF is disabled xtensa: set the correct ethernet address for xtfpga xtensa: clean up files to make them code-style compliant xtensa: provide endianness macro for sparse xtensa: fix RASID SR initialization xtensa: initialize CPENABLE SR when core has one xtensa: reset all timers on initialization Use for_each_compatible_node() macro. xtensa: add XTFPGA DTS xtensa: add support for the XTFPGA boards xtensa: add device trees support xtensa: add IRQ domains support xtensa: add U-Boot image support (uImage). xtensa: clean up boot make rules xtensa: fix mb and wmb definitions xtensa: add s32c1i-based spinlock implementations xtensa: add s32c1i-based bitops implementations xtensa: add s32c1i-based atomic ops implementations xtensa: add s32c1i sanity check xtensa: add trap_set_handler function ...
2012-12-19Merge branch 'x86/nuke386' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull one final 386 removal patch from Peter Anvin. IRQ 13 FPU error handling is gone. That was not one of the proudest moments in PC history. * 'x86/nuke386' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, 386 removal: Remove support for IRQ 13 FPU error reporting
2012-12-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull small x86 fixes from Peter Anvin: "A collection of very small fixes, mostly pure documentation." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, doc: Document that bootloader ID 4 is used also by iPXE x86, doc: Add a formal bootloader ID for kexec-tools x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops
2012-12-19net: qmi_wwan: add ZTE MF880Bjørn Mork
The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19drivers/net: Use of_match_ptr() macro in smsc911x.cSachin Kamat
Add CONFIG_OF guard and use of_match_ptr macro. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19drivers/net: Use of_match_ptr() macro in smc91x.cSachin Kamat
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19ipv6: addrconf.c: remove unnecessary "if"Cong Ding
the value of err is always negative if it goes to errout, so we don't need to check the value of err. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19bridge: Correctly encode addresses when dumping mdb entriesVlad Yasevich
When dumping mdb table, set the addresses the kernel returns based on the address protocol type. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19bridge: Do not unregister all PF_BRIDGE rtnl operationsVlad Yasevich
Bridge fdb and link rtnl operations are registered in core/rtnetlink. Bridge mdb operations are registred in bridge/mdb. When removing bridge module, do not unregister ALL PF_BRIDGE ops since that would remove the ops from rtnetlink as well. Do remove mdb ops when bridge is destroyed. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
2012-12-19use generic usbnet_manage_power()Oliver Neukum
This covers the drivers that can use a primitive implementation. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19usbnet: generic manage_power()Oliver Neukum
Centralise common code for manage_power() in usbnet by making a generic simple implementation Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19usbnet: handle PM failure gracefullyOliver Neukum
If a device fails to do remote wakeup, this is no reason to abort an open totally. This patch just continues without runtime PM. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19ksz884x: fix receive polling race conditionLennert Buytenhek
The ksz884x driver does receive processing in a custom tasklet, and seems to be assuming that since it takes its private interface spinlock with spin_lock_irq(), it won't be running concurrently with its own interrupt handler, as it cannot be preempted by it, but since its interrupt handler doesn't do any locking whatsoever, the receive processing tasklet and interrupt handler can end up running concurrently on different CPUs. As a result of this, the ksz884x receive path ends up locking up fairly easily, when the receive processing tasklet's reenabling of receive interrupts (due to it being done with polling the receive ring) races with the interrupt handler's disabling of receive interrupts (due to a new receive interrupt coming in) resulting in the receive interrupt being masked but the receive processing tasklet not being scheduled. Fix this by making the ksz884x interrupt handler take its private interface spinlock. This requires upgrading the spin_lock() in the transmit cleanup tasklet to a spin_lock_irq(), as otherwise the IRQ handler can preempt transmit cleanup and deadlock the system, but with those two changes, no more receive lockups have been observed. Reported-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> ---- Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19qlcnic: update driver versionSigned-off-by: Sony Chacko
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19qlcnic: fix unused variable warningsShahed Shaikh
qlcnic_hw.c:370: warning: variable cmd_desc set but not used qlcnic_hw.c:368: warning: variable consumer set but not used qlcnic_main.c:448: warning: variable ref_count set but not used qlcnic_main.c:534: warning: variable mem_base set but not used qlcnic_ctx.c:137: warning: variable tmp_tmpl set but not used qlcnic_ctx.c:133: warning: variable version set but not used qlcnic_minidump.c:200: warning: variable opcode set but not used Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19watchdog: Fix disable/enable regressionBjørn Mork
Commit 8d4516904b39 ("watchdog: Fix CPU hotplug regression") causes an oops or hard lockup when doing echo 0 > /proc/sys/kernel/nmi_watchdog echo 1 > /proc/sys/kernel/nmi_watchdog and the kernel is booted with nmi_watchdog=1 (default) Running laptop-mode-tools and disconnecting/connecting AC power will cause this to trigger, making it a common failure scenario on laptops. Instead of bailing out of watchdog_disable() when !watchdog_enabled we can initialize the hrtimer regardless of watchdog_enabled status. This makes it safe to call watchdog_disable() in the nmi_watchdog=0 case, without the negative effect on the enabled => disabled => enabled case. All these tests pass with this patch: - nmi_watchdog=1 echo 0 > /proc/sys/kernel/nmi_watchdog echo 1 > /proc/sys/kernel/nmi_watchdog - nmi_watchdog=0 echo 0 > /sys/devices/system/cpu/cpu1/online - nmi_watchdog=0 echo mem > /sys/power/state Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51661 Cc: <stable@vger.kernel.org> # v3.7 Cc: Norbert Warmuth <nwarmuth@t-online.de> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-12-19Merge tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull pwm changes from Thierry Reding: "A new driver has been added for the SPEAr platform and the TWL4030/6030 driver has been replaced by two drivers that control the regular PWMs and the PWM driven LEDs provided by the chips. The vt8500, tiecap, tiehrpwm, i.MX, LPC32xx and Samsung drivers have all been improved and the device tree bindings now support the PWM signal polarity." Fix up trivial conflicts due to __devinit/exit removal. * tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (21 commits) pwm: samsung: add missing s3c->pwm_id assignment pwm: lpc32xx: Set the chip base for dynamic allocation pwm: lpc32xx: Properly disable the clock on device removal pwm: lpc32xx: Fix the PWM polarity pwm: i.MX: eliminate build warning pwm: Export of_pwm_xlate_with_flags() pwm: Remove pwm-twl6030 driver pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs pwm: New driver to support PWMs on TWL4030/6030 series of PMICs pwm: pwm-tiehrpwm: pinctrl support pwm: tiehrpwm: Add device-tree binding pwm: pwm-tiehrpwm: Adding TBCLK gating support. pwm: pwm-tiecap: pinctrl support pwm: tiecap: Add device-tree binding pwm: Add TI PWM subsystem driver pwm: Device tree support for PWM polarity pwm: vt8500: Ensure PWM clock is enabled during pwm_config pwm: vt8500: Fix build error pwm: spear: Staticize spear_pwm_config() pwm: Add SPEAr PWM chip driver support ...
2012-12-19of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESSJonas Gorski
Fixes the following warning: include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default] include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-19Merge tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery update, part 2, from Anton Vorontsov: "These are left overs that I didn't have time to review/apply before the merge window opened. I didn't want to "spoil" the first pull request with these late patches, so they were not included: - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch creates a battery monitor device instance, so that it can be probed. It was acked by the OMAP maintainer; - A couple of late bug fixes for the charger-manager: corrects corner cases for the battery full handling." * tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6: charger-manager: Fix bug when check dropped voltage after fullbatt event charger-manager: Fix bug related to checking fully charged state of battery ARM: OMAP: rx51: Register platform device for rx51_battery
2012-12-19UAPI: (Scripted) Disintegrate arch/m32r/include/asmDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-12-19UAPI: (Scripted) Disintegrate arch/h8300/include/asmDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-12-19Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module update from Rusty Russell: "Nothing all that exciting; a new module-from-fd syscall for those who want to verify the source of the module (ChromeOS) and/or use standard IMA on it or other security hooks." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Fix kbuild output when using default extra_certificates MODSIGN: Avoid using .incbin in C source modules: don't hand 0 to vmalloc. module: Remove a extra null character at the top of module->strtab. ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants ASN.1: Define indefinite length marker constant moduleparam: use __UNIQUE_ID() __UNIQUE_ID() MODSIGN: Add modules_sign make target powerpc: add finit_module syscall. ima: support new kernel module syscall add finit_module syscall to asm-generic ARM: add finit_module syscall to ARM security: introduce kernel_module_from_file hook module: add flags arg to sys_finit_module() module: add syscall to load module from fd
2012-12-19Merge tag 'byteswap-for-linus-20121219' of ↵Linus Torvalds
git://git.infradead.org/users/dwmw2/byteswap Pull preparatory gcc intrisics bswap patch from David Woodhouse: "This single patch is effectively a no-op for now. It enables architectures to opt in to using GCC's __builtin_bswapXX() intrinsics for byteswapping, and if we merge this now then the architecture maintainers can enable it for their arch during the next cycle without dependency issues. It's worth making it a par-arch opt-in, because although in *theory* the compiler should never do worse than hand-coded assembler (and of course it also ought to do a lot better on platforms like Atom and PowerPC which have load-and-swap or store-and-swap instructions), that isn't always the case. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46453 for example." * tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap: byteorder: allow arch to opt to use GCC intrinsics for byteswapping
2012-12-19blk: avoid divide-by-zero with zero discard granularityLinus Torvalds
Commit 8dd2cb7e880d ("block: discard granularity might not be power of 2") changed a couple of 'binary and' operations into modulus operations. Which turned the harmless case of a zero discard_granularity into a possible divide-by-zero. The code also had a much more subtle bug: it was doing the modulus of a value in bytes using 'sector_t'. That was always conceptually wrong, but didn't actually matter back when the code assumed a power-of-two granularity: we only looked at the low bits anyway. But with potentially arbitrary sector numbers, using a 'sector_t' to express bytes is very very wrong: depending on configuration it limits the starting offset of the device to just 32 bits, and any overflow would result in a wrong value if the modulus wasn't a power-of-two. So re-write the code to not only protect against the divide-by-zero, but to do the starting sector arithmetic in sectors, and using the proper types. [ For any mathematicians out there: it also looks monumentally stupid to do the 'modulo granularity' operation *twice*, never mind having a "+ granularity" in the second modulus op. But that's the easiest way to avoid negative values or overflow, and it is how the original code was done. ] Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Doug Anderson <dianders@chromium.org> Cc: Neil Brown <neilb@suse.de> Cc: Shaohua Li <shli@fusionio.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19spi/sh-hspi: fix return value check in hspi_probe().Cyril Roelandt
According to its documentation, clk_get() returns a "valid IS_ERR() condition containing errno", so we should call IS_ERR() rather than a NULL check. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-19spi: fix tegra SPI binding examplesAllen Martin
Fix name of slink binding and address of sflash example to make it self consistent. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-19of: Fix export of of_find_matching_node_and_match()Grant Likely
Commit 50c8af4cf9, "of: introduce for_each_matching_node_and_match()" renamed of_find_matching_node() to of_find_matching_node_and_match() and created a new static inline of_find_matching_node() wrapper around the new name. However, the change neglected to change the EXPORT_SYMBOL() reference causing build errors for modules. This patch fixes the EXPORT_SYMBOL() statement. Discovered on a PowerPC Efika build with the mpc52xx_uart driver being built as a module. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-19ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card:Damien Zammit
This patch is the result of a lot of trial and error, since there are no specs available for the device. Full duplex support is provided, i.e. playback and recording in stereo. The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the device supports. Also, MIDI in and MIDI out both work. Users will notice that the S/PDIF light also flashes when playback or recording is active. I believe this means that S/PDIF input/output is simultaneously activated with the analogue i/o during use. But this particular functionality remains untested. Note that this particular version of the patch is so far untested on the physical hardware because I have not compiled a full kernel with the changes. However, extensive testing has been done by many users of the hardware who believe other versions of my patch have worked since circa 2009. [Modified to make a function static by tiwai] Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-18xtensa: don't try to build DTB when OF is disabledMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: set the correct ethernet address for xtfpgaChris Zankel
The last byte of the mac address is determined by a DIP switch, so update the OF property with that address. Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: clean up files to make them code-style compliantChris Zankel
Remove heading and trailing spaces, trim trailing lines, and wrap lines that are longer than 80 characters. Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: provide endianness macro for sparseMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: fix RASID SR initializationMax Filippov
set_rasid_register accepts new RASID SR value, but ASID_USER_FIRST is ASID value for the ring 1; RASID value is made by ASID_INSERT macro. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: initialize CPENABLE SR when core has oneMax Filippov
XCHAL_CP_NUM is defined in variant/tie.h and it is not included by head.S, leaving CPENABLE register uninitialised. XCHAL_HAVE_CP is defined in variant/core.h to 1 when core has CPENABLE SR. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: reset all timers on initializationMax Filippov
There are XCHAL_NUM_TIMERS, reset them all. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18Use for_each_compatible_node() macro.Wei Yongjun
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add XTFPGA DTSMax Filippov
Add common XTFPGA parts as *.dtsi (base board, flash) and DTS for LX60 and for ML605. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18xtensa: add support for the XTFPGA boardsMax Filippov
The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with an Xtensa processor and an OpenCores Ethernet device. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
generated by cgit (git 2.34.1) at 2025-07-15 16:51:57 +0000