summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-25iavf: Fix race in init stateSlawomir Laba
When iavf_init_version_check sends VIRTCHNL_OP_GET_VF_RESOURCES message, the driver will wait for the response after requeueing the watchdog task in iavf_init_get_resources call stack. The logic is implemented this way that iavf_init_get_resources has to be called in order to allocate adapter->vf_res. It is polling for the AQ response in iavf_get_vf_config function. Expect a call trace from kernel when adminq_task worker handles this message first. adapter->vf_res will be NULL in iavf_virtchnl_completion. Make the watchdog task not queue the adminq_task if the init process is not finished yet. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Fix locking for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPSSlawomir Laba
iavf_virtchnl_completion is called under crit_lock but when the code for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is called, this lock is released in order to obtain rtnl_lock to avoid ABBA deadlock with unregister_netdev. Along with the new way iavf_remove behaves, there exist many risks related to the lock release and attmepts to regrab it. The driver faces crashes related to races between unregister_netdev and netdev_update_features. Yet another risk is that the driver could already obtain the crit_lock in order to destroy it and iavf_virtchnl_completion could crash or block forever. Make iavf_virtchnl_completion never relock crit_lock in it's call paths. Extract rtnl_lock locking logic to the driver for unregister_netdev in order to set the netdev_registered flag inside the lock. Introduce a new flag that will inform adminq_task to perform the code from VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS right after it finishes processing messages. Guard this code with remove flags so it's never called when the driver is in remove state. Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Fix init state closure on removeSlawomir Laba
When init states of the adapter work, the errors like lack of communication with the PF might hop in. If such events occur the driver restores previous states in order to retry initialization in a proper way. When remove task kicks in, this situation could lead to races with unregistering the netdevice as well as resources cleanup. With the commit introducing the waiting in remove for init to complete, this problem turns into an endless waiting if init never recovers from errors. Introduce __IAVF_IN_REMOVE_TASK bit to indicate that the remove thread has started. Make __IAVF_COMM_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and set the __IAVF_INIT_FAILED state and return without any action instead of trying to recover. Make __IAVF_INIT_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and return without any further actions. Make the loop in the remove handler break when adapter has __IAVF_INIT_FAILED state set. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Add waiting so the port is initialized in removeSlawomir Laba
There exist races when port is being configured and remove is triggered. unregister_netdev is not and can't be called under crit_lock mutex since it is calling ndo_stop -> iavf_close which requires this lock. Depending on init state the netdev could be still unregistered so unregister_netdev never cleans up, when shortly after that the device could become registered. Make iavf_remove wait until port finishes initialization. All critical state changes are atomic (under crit_lock). Crashes that come from iavf_reset_interrupt_capability and iavf_free_traffic_irqs should now be solved in a graceful manner. Fixes: 605ca7c5c6707 ("iavf: Fix kernel BUG in free_msi_irqs") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Rework mutexes for better synchronisationSlawomir Laba
The driver used to crash in multiple spots when put to stress testing of the init, reset and remove paths. The user would experience call traces or hangs when creating, resetting, removing VFs. Depending on the machines, the call traces are happening in random spots, like reset restoring resources racing with driver remove. Make adapter->crit_lock mutex a mandatory lock for guarding the operations performed on all workqueues and functions dealing with resource allocation and disposal. Make __IAVF_REMOVE a final state of the driver respected by workqueues that shall not requeue, when they fail to obtain the crit_lock. Make the IRQ handler not to queue the new work for adminq_task when the __IAVF_REMOVE state is set. Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25Merge tag 'usb-5.17-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.17-rc6 to resolve reported problems and add new device ids. They include: - dwc3: - device mapping fix - new device ids - driver fixes - xhci driver fixes - gadget driver fixes - usb-serial driver device id updates All of these have been in linux-next with no reported problems" * tag 'usb-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: rndis: add spinlock for rndis response list usb: dwc3: gadget: Let the interrupt handler disable bottom halves. USB: gadget: validate endpoint index for xilinx udc USB: serial: option: add Telit LE910R1 compositions USB: serial: option: add support for DW5829e Revert "USB: serial: ch341: add new Product ID for CH341A" usb: dwc2: drd: fix soft connect when gadget is unconfigured usb: dwc3: pci: Fix Bay Trail phy GPIO mappings tps6598x: clear int mask on probe failure xhci: Prevent futile URB re-submissions due to incorrect return value. xhci: re-initialize the HC during resume if HCE was set usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail usb: dwc3: pci: add support for the Intel Raptor Lake-S
2022-02-25Merge tag 'ata-5.17-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fixes from Damien Le Moal: "Two fixes for the pata_hpt37x driver, both from Sergey: - Fix a PCI register access using an incorrect size (8bits instead of 16bits) - Make sure to always disable the primary channel as it is unused" * tag 'ata-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_hpt37x: disable primary channel on HPT371 ata: pata_hpt37x: fix PCI clock detection
2022-02-25tracing/osnoise: Make osnoise_main to sleep for microsecondsDaniel Bristot de Oliveira
osnoise's runtime and period are in the microseconds scale, but it is currently sleeping in the millisecond's scale. This behavior roots in the usage of hwlat as the skeleton for osnoise. Make osnoise to sleep in the microseconds scale. Also, move the sleep to a specialized function. Link: https://lkml.kernel.org/r/302aa6c7bdf2d131719b22901905e9da122a11b2.1645197336.git.bristot@kernel.org Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-25ftrace: Remove unused ftrace_startup_enable() stubNathan Chancellor
When building with clang + CONFIG_DYNAMIC_FTRACE=n + W=1, there is a warning: kernel/trace/ftrace.c:7194:20: error: unused function 'ftrace_startup_enable' [-Werror,-Wunused-function] static inline void ftrace_startup_enable(int command) { } ^ 1 error generated. Clang warns on instances of static inline functions in .c files with W=1 after commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). The ftrace_startup_enable() stub has been unused since commit e1effa0144a1 ("ftrace: Annotate the ops operation on update"), where its use outside of the CONFIG_DYNAMIC_TRACE section was replaced by ftrace_startup_all(). Remove it to resolve the warning. Link: https://lkml.kernel.org/r/20220214192847.488166-1-nathan@kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-25tracing: Ensure trace buffer is at least 4096 bytes largeSven Schnelle
Booting the kernel with 'trace_buf_size=1' give a warning at boot during the ftrace selftests: [ 0.892809] Running postponed tracer tests: [ 0.892893] Testing tracer function: [ 0.901899] Callback from call_rcu_tasks_trace() invoked. [ 0.983829] Callback from call_rcu_tasks_rude() invoked. [ 1.072003] .. bad ring buffer .. corrupted trace buffer .. [ 1.091944] Callback from call_rcu_tasks() invoked. [ 1.097695] PASSED [ 1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED! [ 1.353474] ------------[ cut here ]------------ [ 1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0 Therefore enforce a minimum of 4096 bytes to make the selftest pass. Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-25tracing: Uninline trace_trigger_soft_disabled() partlyChristophe Leroy
On a powerpc32 build with CONFIG_CC_OPTIMISE_FOR_SIZE, the inline keyword is not honored and trace_trigger_soft_disabled() appears approx 50 times in vmlinux. Adding -Winline to the build, the following message appears: ./include/linux/trace_events.h:712:1: error: inlining failed in call to 'trace_trigger_soft_disabled': call is unlikely and code size would grow [-Werror=inline] That function is rather big for an inlined function: c003df60 <trace_trigger_soft_disabled>: c003df60: 94 21 ff f0 stwu r1,-16(r1) c003df64: 7c 08 02 a6 mflr r0 c003df68: 90 01 00 14 stw r0,20(r1) c003df6c: bf c1 00 08 stmw r30,8(r1) c003df70: 83 e3 00 24 lwz r31,36(r3) c003df74: 73 e9 01 00 andi. r9,r31,256 c003df78: 41 82 00 10 beq c003df88 <trace_trigger_soft_disabled+0x28> c003df7c: 38 60 00 00 li r3,0 c003df80: 39 61 00 10 addi r11,r1,16 c003df84: 4b fd 60 ac b c0014030 <_rest32gpr_30_x> c003df88: 73 e9 00 80 andi. r9,r31,128 c003df8c: 7c 7e 1b 78 mr r30,r3 c003df90: 41 a2 00 14 beq c003dfa4 <trace_trigger_soft_disabled+0x44> c003df94: 38 c0 00 00 li r6,0 c003df98: 38 a0 00 00 li r5,0 c003df9c: 38 80 00 00 li r4,0 c003dfa0: 48 05 c5 f1 bl c009a590 <event_triggers_call> c003dfa4: 73 e9 00 40 andi. r9,r31,64 c003dfa8: 40 82 00 28 bne c003dfd0 <trace_trigger_soft_disabled+0x70> c003dfac: 73 ff 02 00 andi. r31,r31,512 c003dfb0: 41 82 ff cc beq c003df7c <trace_trigger_soft_disabled+0x1c> c003dfb4: 80 01 00 14 lwz r0,20(r1) c003dfb8: 83 e1 00 0c lwz r31,12(r1) c003dfbc: 7f c3 f3 78 mr r3,r30 c003dfc0: 83 c1 00 08 lwz r30,8(r1) c003dfc4: 7c 08 03 a6 mtlr r0 c003dfc8: 38 21 00 10 addi r1,r1,16 c003dfcc: 48 05 6f 6c b c0094f38 <trace_event_ignore_this_pid> c003dfd0: 38 60 00 01 li r3,1 c003dfd4: 4b ff ff ac b c003df80 <trace_trigger_soft_disabled+0x20> However it is located in a hot path so inlining it is important. But forcing inlining of the entire function by using __always_inline leads to increasing the text size by approx 20 kbytes. Instead, split the fonction in two parts, one part with the likely fast path, flagged __always_inline, and a second part out of line. With this change, on a powerpc32 with CONFIG_CC_OPTIMISE_FOR_SIZE vmlinux text increases by only 1,4 kbytes, which is partly compensated by a decrease of vmlinux data by 7 kbytes. On ppc64_defconfig which has CONFIG_CC_OPTIMISE_FOR_SPEED, this change reduces vmlinux text by more than 30 kbytes. Link: https://lkml.kernel.org/r/69ce0986a52d026d381d612801d978aa4f977460.1644563295.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-25eprobes: Remove redundant event type informationSteven Rostedt (Google)
Currently, the event probes save the type of the event they are attached to when recording the event. For example: # echo 'e:switch sched/sched_switch prev_state=$prev_state prev_prio=$prev_prio next_pid=$next_pid next_prio=$next_prio' > dynamic_events # cat events/eprobes/switch/format name: switch ID: 1717 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:unsigned int __probe_type; offset:8; size:4; signed:0; field:u64 prev_state; offset:12; size:8; signed:0; field:u64 prev_prio; offset:20; size:8; signed:0; field:u64 next_pid; offset:28; size:8; signed:0; field:u64 next_prio; offset:36; size:8; signed:0; print fmt: "(%u) prev_state=0x%Lx prev_prio=0x%Lx next_pid=0x%Lx next_prio=0x%Lx", REC->__probe_type, REC->prev_state, REC->prev_prio, REC->next_pid, REC->next_prio The __probe_type adds 4 bytes to every event. One of the reasons for creating eprobes is to limit what is traced in an event to be able to limit what is written into the ring buffer. Having this redundant 4 bytes to every event takes away from this. The event that is recorded can be retrieved from the event probe itself, that is available when the trace is happening. For user space tools, it could simply read the dynamic_event file to find the event they are for. So there is really no reason to write this information into the ring buffer for every event. Link: https://lkml.kernel.org/r/20220218190057.2f5a19a8@gandalf.local.home Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-25tracing: Have traceon and traceoff trigger honor the instanceSteven Rostedt (Google)
If a trigger is set on an event to disable or enable tracing within an instance, then tracing should be disabled or enabled in the instance and not at the top level, which is confusing to users. Link: https://lkml.kernel.org/r/20220223223837.14f94ec3@rorschach.local.home Cc: stable@vger.kernel.org Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables") Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-02-25net: stmmac: fix return value of __setup handlerRandy Dunlap
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Fixes: f3240e2811f0 ("stmmac: remove warning when compile as built-in (V2)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Jose Abreu <joabreu@synopsys.com> Link: https://lore.kernel.org/r/20220224033536.25056-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-25net: sxgbe: fix return value of __setup handlerRandy Dunlap
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: acc18c147b22 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe") Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Siva Reddy <siva.kallam@samsung.com> Cc: Girish K S <ks.giri@samsung.com> Cc: Byungho An <bh74.an@samsung.com> Link: https://lore.kernel.org/r/20220224033528.24640-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-25can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when ↵Lad Prabhakar
fully ready Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device. Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@bp.renesas.com Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-02-25ucounts: Fix systemd LimitNPROC with private users regressionEric W. Biederman
Long story short recursively enforcing RLIMIT_NPROC when it is not enforced on the process that creates a new user namespace, causes currently working code to fail. There is no reason to enforce RLIMIT_NPROC recursively when we don't enforce it normally so update the code to detect this case. I would like to simply use capable(CAP_SYS_RESOURCE) to detect when RLIMIT_NPROC is not enforced upon the caller. Unfortunately because RLIMIT_NPROC is charged and checked for enforcement based upon the real uid, using capable() which is euid based is inconsistent with reality. Come as close as possible to testing for capable(CAP_SYS_RESOURCE) by testing for when the real uid would match the conditions when CAP_SYS_RESOURCE would be present if the real uid was the effective uid. Reported-by: Etienne Dechamps <etienne@edechamps.fr> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215596 Link: https://lkml.kernel.org/r/e9589141-cfeb-90cd-2d0e-83a62787239a@edechamps.fr Link: https://lkml.kernel.org/r/87sfs8jmpz.fsf_-_@email.froward.int.ebiederm.org Cc: stable@vger.kernel.org Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-02-25Merge tag 'soc-fsl-fix-v5.17' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes NXP/FSL SoC driver fixes for v5.17 - Add missing SoC compatible in existing binding - Replace kernel.h with the necessary inclusions - MAINTAINERS file fixes - Fix memory allocation failure check in guts driver - Various cleanups and minor fixes * tag 'soc-fsl-fix-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: qe: Check of ioremap return value soc: fsl: qe: fix typo in a comment soc: fsl: guts: Add a missing memory allocation failure check soc: fsl: guts: Revert commit 3c0d64e867ed soc: fsl: Correct MAINTAINERS database (SOC) soc: fsl: Correct MAINTAINERS database (QUICC ENGINE LIBRARY) soc: fsl: Replace kernel.h with the necessary inclusions dt-bindings: fsl,layerscape-dcfg: add missing compatible for lx2160a dt-bindings: qoriq-clock: add missing compatible for lx2160a Link: https://lore.kernel.org/r/20220219012208.21835-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-25KVM: x86: Yield to IPI target vCPU only if it is busyLi RongQing
When sending a call-function IPI-many to vCPUs, yield to the IPI target vCPU which is marked as preempted. but when emulating HLT, an idling vCPU will be voluntarily scheduled out and mark as preempted from the guest kernel perspective. yielding to idle vCPU is pointless and increase unnecessary vmexit, maybe miss the true preempted vCPU so yield to IPI target vCPU only if vCPU is busy and preempted Signed-off-by: Li RongQing <lirongqing@baidu.com> Message-Id: <1644380201-29423-1-git-send-email-lirongqing@baidu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-25x86/kvmclock: Fix Hyper-V Isolated VM's boot issue when vCPUs > 64Dexuan Cui
When Linux runs as an Isolated VM on Hyper-V, it supports AMD SEV-SNP but it's partially enlightened, i.e. cc_platform_has( CC_ATTR_GUEST_MEM_ENCRYPT) is true but sev_active() is false. Commit 4d96f9109109 per se is good, but with it now kvm_setup_vsyscall_timeinfo() -> kvmclock_init_mem() calls set_memory_decrypted(), and later gets stuck when trying to zere out the pages pointed by 'hvclock_mem', if Linux runs as an Isolated VM on Hyper-V. The cause is that here now the Linux VM should no longer access the original guest physical addrss (GPA); instead the VM should do memremap() and access the original GPA + ms_hyperv.shared_gpa_boundary: see the example code in drivers/hv/connection.c: vmbus_connect() or drivers/hv/ring_buffer.c: hv_ringbuffer_init(). If the VM tries to access the original GPA, it keepts getting injected a fault by Hyper-V and gets stuck there. Here the issue happens only when the VM has >=65 vCPUs, because the global static array hv_clock_boot[] can hold 64 "struct pvclock_vsyscall_time_info" (the sizeof of the struct is 64 bytes), so kvmclock_init_mem() only allocates memory in the case of vCPUs > 64. Since the 'hvclock_mem' pages are only useful when the kvm clock is supported by the underlying hypervisor, fix the issue by returning early when Linux VM runs on Hyper-V, which doesn't support kvm clock. Fixes: 4d96f9109109 ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()") Tested-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Message-Id: <20220225084600.17817-1-decui@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-25x86/kvm: Don't waste memory if kvmclock is disabledWanpeng Li
Even if "no-kvmclock" is passed in cmdline parameter, the guest kernel still allocates hvclock_mem which is scaled by the number of vCPUs, let's check kvmclock enable in advance to avoid this memory waste. Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1645520523-30814-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-25x86/kvm: Don't use PV TLB/yield when mwait is advertisedWanpeng Li
MWAIT is advertised in host is not overcommitted scenario, however, PV TLB/sched yield should be enabled in host overcommitted scenario. Let's add the MWAIT checking when enabling PV TLB/sched yield. Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1645777780-2581-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-25Merge tag 'kvmarm-fixes-5.17-4' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #4 - Correctly synchronise PMR and co on PSCI CPU_SUSPEND - Skip tests that depend on GICv3 when the HW isn't available
2022-02-25KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3Mark Brown
The arch_timer and vgic_irq kselftests assume that they can create a vgic-v3, using the library function vgic_v3_setup() which aborts with a test failure if it is not possible to do so. Since vgic-v3 can only be instantiated on systems where the host has GICv3 this leads to false positives on older systems where that is not the case. Fix this by changing vgic_v3_setup() to return an error if the vgic can't be instantiated and have the callers skip if this happens. We could also exit flagging a skip in vgic_v3_setup() but this would prevent future test cases conditionally deciding which GIC to use or generally doing more complex output. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220223131624.1830351-1-broonie@kernel.org
2022-02-25net: sparx5: Fix add vlan when invalid operationCasper Andersson
Check if operation is valid before changing any settings in hardware. Otherwise it results in changes being made despite it not being a valid operation. Fixes: 78eab33bb68b ("net: sparx5: add vlan support") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25net: chelsio: cxgb3: check the return value of pci_find_capability()Jia-Ju Bai
The function pci_find_capability() in t3_prep_adapter() can fail, so its return value should be checked. Fixes: 4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter, T3") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25Merge branch 'ibmvnic-fixes'David S. Miller
Sukadev Bhattiprolu says: ==================== ibmvnic: Fix a race in ibmvnic_probe() If we get a transport (reset) event right after a successful CRQ_INIT during ibmvnic_probe() but before we set the adapter state to VNIC_PROBED, we will throw away the reset assuming that the adapter is still in the probing state. But since the adapter has completed the CRQ_INIT any subsequent CRQs the we send will be ignored by the vnicserver until we release/init the CRQ again. This can leave the adapter unconfigured. While here fix a couple of other bugs that were observed (Patches 1,2,4). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: Allow queueing resets during probeSukadev Bhattiprolu
We currently don't allow queuing resets when adapter is in VNIC_PROBING state - instead we throw away the reset and return EBUSY. The reasoning is probably that during ibmvnic_probe() the ibmvnic_adapter itself is being initialized so performing a reset during this time can lead us to accessing fields in the ibmvnic_adapter that are not fully initialized. A review of the code shows that all the adapter state neede to process a reset is initialized before registering the CRQ so that should no longer be a concern. Further the expectation is that if we do get a reset (transport event) during probe, the do..while() loop in ibmvnic_probe() will handle this by reinitializing the CRQ. While that is true to some extent, it is possible that the reset might occur _after_ the CRQ is registered and CRQ_INIT message was exchanged but _before_ the adapter state is set to VNIC_PROBED. As mentioned above, such a reset will be thrown away. While the client assumes that the adapter is functional, the vnic server will wait for the client to reinit the adapter. This disconnect between the two leaves the adapter down needing manual intervention. Because ibmvnic_probe() has other work to do after initializing the CRQ (such as registering the netdev at a minimum) and because the reset event can occur at any instant after the CRQ is initialized, there will always be a window between initializing the CRQ and considering the adapter ready for resets (ie state == PROBED). So rather than discarding resets during this window, allow queueing them - but only process them after the adapter is fully initialized. To do this, introduce a new completion state ->probe_done and have the reset worker thread wait on this before processing resets. This change brings up two new situations in or just after ibmvnic_probe(). First after one or more resets were queued, we encounter an error and decide to retry the initialization. At that point the queued resets are no longer relevant since we could be talking to a new vnic server. So we must purge/flush the queued resets before restarting the initialization. As a side note, since we are still in the probing stage and we have not registered the netdev, it will not be CHANGE_PARAM reset. Second this change opens up a potential race between the worker thread in __ibmvnic_reset(), the tasklet and the ibmvnic_open() due to the following sequence of events: 1. Register CRQ 2. Get transport event before CRQ_INIT completes. 3. Tasklet schedules reset: a) add rwi to list b) schedule_work() to start worker thread which runs and waits for ->probe_done. 4. ibmvnic_probe() decides to retry, purges rwi_list 5. Re-register crq and this time rest of probe succeeds - register netdev and complete(->probe_done). 6. Worker thread resumes in __ibmvnic_reset() from 3b. 7. Worker thread sets ->resetting bit 8. ibmvnic_open() comes in, notices ->resetting bit, sets state to IBMVNIC_OPEN and returns early expecting worker thread to finish the open. 9. Worker thread finds rwi_list empty and returns without opening the interface. If this happens, the ->ndo_open() call is effectively lost and the interface remains down. To address this, ensure that ->rwi_list is not empty before setting the ->resetting bit. See also comments in __ibmvnic_reset(). Fixes: 6a2fb0e99f9c ("ibmvnic: driver initialization for kdump/kexec") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: clear fop when retrying probeSukadev Bhattiprolu
Clear ->failover_pending flag that may have been set in the previous pass of registering CRQ. If we don't clear, a subsequent ibmvnic_open() call would be misled into thinking a failover is pending and assuming that the reset worker thread would open the adapter. If this pass of registering the CRQ succeeds (i.e there is no transport event), there wouldn't be a reset worker thread. This would leave the adapter unconfigured and require manual intervention to bring it up during boot. Fixes: 5a18e1e0c193 ("ibmvnic: Fix failover case for non-redundant configuration") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: init init_done_rc earlierSukadev Bhattiprolu
We currently initialize the ->init_done completion/return code fields before issuing a CRQ_INIT command. But if we get a transport event soon after registering the CRQ the taskslet may already have recorded the completion and error code. If we initialize here, we might overwrite/ lose that and end up issuing the CRQ_INIT only to timeout later. If that timeout happens during probe, we will leave the adapter in the DOWN state rather than retrying to register/init the CRQ. Initialize the completion before registering the CRQ so we don't lose the notification. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: register netdev after init of adapterSukadev Bhattiprolu
Finish initializing the adapter before registering netdev so state is consistent. Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: complete init_done on transport eventsSukadev Bhattiprolu
If we get a transport event, set the error and mark the init as complete so the attempt to send crq-init or login fail sooner rather than wait for the timeout. Fixes: bbd669a868bb ("ibmvnic: Fix completion structure initialization") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: define flush_reset_queue helperSukadev Bhattiprolu
Define and use a helper to flush the reset queue. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: initialize rc before completing waitSukadev Bhattiprolu
We should initialize ->init_done_rc before calling complete(). Otherwise the waiting thread may see ->init_done_rc as 0 before we have updated it and may assume that the CRQ was successful. Fixes: 6b278c0cb378 ("ibmvnic delay complete()") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: free reset-work-item when flushingSukadev Bhattiprolu
Fix a tiny memory leak when flushing the reset work queue. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) Fix PMTU for IPv6 if the reported MTU minus the ESP overhead is smaller than 1280. From Jiri Bohac. 2) Fix xfrm interface ID and inter address family tunneling when migrating xfrm states. From Yan Yan. 3) Add missing xfrm intrerface ID initialization on xfrmi_changelink. From Antony Antony. 4) Enforce validity of xfrm offload input flags so that userspace can't send undefined flags to the offload driver. From Leon Romanovsky. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25net: dcb: flush lingering app table entries for unregistered devicesVladimir Oltean
If I'm not mistaken (and I don't think I am), the way in which the dcbnl_ops work is that drivers call dcb_ieee_setapp() and this populates the application table with dynamically allocated struct dcb_app_type entries that are kept in the module-global dcb_app_list. However, nobody keeps exact track of these entries, and although dcb_ieee_delapp() is supposed to remove them, nobody does so when the interface goes away (example: driver unbinds from device). So the dcb_app_list will contain lingering entries with an ifindex that no longer matches any device in dcb_app_lookup(). Reclaim the lost memory by listening for the NETDEV_UNREGISTER event and flushing the app table entries of interfaces that are now gone. In fact something like this used to be done as part of the initial commit (blamed below), but it was done in dcbnl_exit() -> dcb_flushapp(), essentially at module_exit time. That became dead code after commit 7a6b6f515f77 ("DCB: fix kconfig option") which essentially merged "tristate config DCB" and "bool config DCBNL" into a single "bool config DCB", so net/dcb/dcbnl.c could not be built as a module anymore. Commit 36b9ad8084bd ("net/dcb: make dcbnl.c explicitly non-modular") recognized this and deleted dcbnl_exit() and dcb_flushapp() altogether, leaving us with the version we have today. Since flushing application table entries can and should be done as soon as the netdevice disappears, fundamentally the commit that is to blame is the one that introduced the design of this API. Fixes: 9ab933ab2cc8 ("dcbnl: add appliction tlv handlers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25net/smc: fix connection leakD. Wythe
There's a potential leak issue under following execution sequence : smc_release smc_connect_work if (sk->sk_state == SMC_INIT) send_clc_confirim tcp_abort(); ... sk.sk_state = SMC_ACTIVE smc_close_active switch(sk->sk_state) { ... case SMC_ACTIVE: smc_close_final() // then wait peer closed Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are still in the tcp send buffer, in which case our connection token cannot be delivered to the server side, which means that we cannot get a passive close message at all. Therefore, it is impossible for the to be disconnected at all. This patch tries a very simple way to avoid this issue, once the state has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the smc connection, considering that the state is SMC_INIT before tcp_abort(), abandoning the complete disconnection process should not cause too much problem. In fact, this problem may exist as long as the CLC CONFIRM message is not received by the server. Whether a timer should be added after smc_close_final() needs to be discussed in the future. But even so, this patch provides a faster release for connection in above case, it should also be valuable. Fixes: 39f41f367b08 ("net/smc: common release code for non-accepted sockets") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25net: stmmac: only enable DMA interrupts when readyVincent Whitchurch
In this driver's ->ndo_open() callback, it enables DMA interrupts, starts the DMA channels, then requests interrupts with request_irq(), and then finally enables napi. If RX DMA interrupts are received before napi is enabled, no processing is done because napi_schedule_prep() will return false. If the network has a lot of broadcast/multicast traffic, then the RX ring could fill up completely before napi is enabled. When this happens, no further RX interrupts will be delivered, and the driver will fail to receive any packets. Fix this by only enabling DMA interrupts after all other initialization is complete. Fixes: 523f11b5d4fd72efb ("net: stmmac: move hardware setup for stmmac_open to new function") Reported-by: Lars Persson <larper@axis.com> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25xen/netfront: destroy queues before real_num_tx_queues is zeroedMarek Marczykowski-Górecki
xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at https://github.com/QubesOS/qubes-issues/issues/7257 Fixes: d7dac083414eb5bb9 ("net-sysfs: update the queue counts in the unregistration path") Cc: stable@vger.kernel.org Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25Merge tag 'omap-for-v5.17/fixes-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps Fixes for devkit8000 timer regression. Similar to the earlier beagleboard fixes, we must not configure the clocksource drivers to use an alternative timer configuration. It causes unnecessary issues with power management. Only some old designs based on early beagleboard revisions with a miswired timer need to use the alternative timer. * tag 'omap-for-v5.17/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Use 32KiHz oscillator on devkit8000 ARM: dts: switch timer config to common devkit8000 devicetree Link: https://lore.kernel.org/r/pull-1645606483-876944@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-25Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"Sean Christopherson
Revert back to refreshing vmcs.HOST_CR3 immediately prior to VM-Enter. The PCID (ASID) part of CR3 can be bumped without KVM being scheduled out, as the kernel will switch CR3 during __text_poke(), e.g. in response to a static key toggling. If switch_mm_irqs_off() chooses a new ASID for the mm associate with KVM, KVM will do VM-Enter => VM-Exit with a stale vmcs.HOST_CR3. Add a comment to explain why KVM must wait until VM-Enter is imminent to refresh vmcs.HOST_CR3. The following splat was captured by stashing vmcs.HOST_CR3 in kvm_vcpu and adding a WARN in load_new_mm_cr3() to fire if a new ASID is being loaded for the KVM-associated mm while KVM has a "running" vCPU: static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush) { struct kvm_vcpu *vcpu = kvm_get_running_vcpu(); ... WARN(vcpu && (vcpu->cr3 & GENMASK(11, 0)) != (new_mm_cr3 & GENMASK(11, 0)) && (vcpu->cr3 & PHYSICAL_PAGE_MASK) == (new_mm_cr3 & PHYSICAL_PAGE_MASK), "KVM is hosed, loading CR3 = %lx, vmcs.HOST_CR3 = %lx", new_mm_cr3, vcpu->cr3); } ------------[ cut here ]------------ KVM is hosed, loading CR3 = 8000000105393004, vmcs.HOST_CR3 = 105393003 WARNING: CPU: 4 PID: 20717 at arch/x86/mm/tlb.c:291 load_new_mm_cr3+0x82/0xe0 Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel CPU: 4 PID: 20717 Comm: stable Tainted: G W 5.17.0-rc3+ #747 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:load_new_mm_cr3+0x82/0xe0 RSP: 0018:ffffc9000489fa98 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 8000000105393004 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff888277d1b788 RBP: 0000000000000004 R08: ffff888277d1b780 R09: ffffc9000489f8b8 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88810678a800 R14: 0000000000000004 R15: 0000000000000c33 FS: 00007fa9f0e72700(0000) GS:ffff888277d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001001b5003 CR4: 0000000000172ea0 Call Trace: <TASK> switch_mm_irqs_off+0x1cb/0x460 __text_poke+0x308/0x3e0 text_poke_bp_batch+0x168/0x220 text_poke_finish+0x1b/0x30 arch_jump_label_transform_apply+0x18/0x30 static_key_slow_inc_cpuslocked+0x7c/0x90 static_key_slow_inc+0x16/0x20 kvm_lapic_set_base+0x116/0x190 kvm_set_apic_base+0xa5/0xe0 kvm_set_msr_common+0x2f4/0xf60 vmx_set_msr+0x355/0xe70 [kvm_intel] kvm_set_msr_ignored_check+0x91/0x230 kvm_emulate_wrmsr+0x36/0x120 vmx_handle_exit+0x609/0x6c0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x146f/0x1b80 kvm_vcpu_ioctl+0x279/0x690 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]--- This reverts commit 15ad9762d69fd8e40a4a51828c1d6b0c1b8fbea0. Fixes: 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") Reported-by: Wanpeng Li <kernellwp@gmail.com> Cc: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Lai Jiangshan <jiangshanlai@gmail.com> Message-Id: <20220224191917.3508476-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-25Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()"Sean Christopherson
Undo a nested VMX fix as a step toward reverting the commit it fixed, 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"), as the underlying premise that "host CR3 in the vcpu thread can only be changed when scheduling" is wrong. This reverts commit a9f2705ec84449e3b8d70c804766f8e97e23080d. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220224191917.3508476-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-25can: gs_usb: change active_channels's type from atomic_t to u8Vincent Mailhol
The driver uses an atomic_t variable: gs_usb:active_channels to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. However, the driver does not decrement the counter when an error occurs in gs_can_open(). This issue is fixed by changing the type from atomic_t to u8 and by simplifying the logic accordingly. It is safe to use an u8 here because the network stack big kernel lock (a.k.a. rtnl_mutex) is being hold. For details, please refer to [1]. [1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220214234814.1321599-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-02-25can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8Vincent Mailhol
The driver uses an atomic_t variable: struct es58x_device::opened_channel_cnt to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. While the intent was to prevent race conditions, the choice of an atomic_t turns out to be a bad idea for several reasons: - implementation is incorrect and fails to decrement opened_channel_cnt when the URB allocation fails as reported in [1]. - even if opened_channel_cnt were to be correctly decremented, atomic_t is insufficient to cover edge cases: there can be a race condition in which 1/ a first process fails to allocate URBs memory 2/ a second process enters es58x_open() before the first process does its cleanup and decrements opened_channed_cnt. In which case, the second process would successfully return despite the URBs memory not being allocated. - actually, any kind of locking mechanism was useless here because it is redundant with the network stack big kernel lock (a.k.a. rtnl_lock) which is being hold by all the callers of net_device_ops:ndo_open() and net_device_ops:ndo_close(). c.f. the ASSERST_RTNL() calls in __dev_open() [2] and __dev_close_many() [3]. The atmomic_t is thus replaced by a simple u8 type and the logic to increment and decrement es58x_device:opened_channel_cnt is simplified accordingly fixing the bug reported in [1]. We do not check again for ASSERST_RTNL() as this is already done by the callers. [1] https://lore.kernel.org/linux-can/20220201140351.GA2548@kili/T/#u [2] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1463 [3] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1541 Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/20220212112713.577957-1-mailhol.vincent@wanadoo.fr Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-02-24Merge branch 'mptcp-fixes-for-5-17'Jakub Kicinski
Mat Martineau says: ==================== mptcp: Fixes for 5.17 Patch 1 fixes an issue with the SIOCOUTQ ioctl in MPTCP sockets that have performed a fallback to TCP. Patch 2 is a selftest fix to correctly remove temp files. Patch 3 fixes a shift-out-of-bounds issue found by syzkaller. ==================== Link: https://lore.kernel.org/r/20220225005259.318898-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24mptcp: Correctly set DATA_FIN timeout when number of retransmits is largeMat Martineau
Syzkaller with UBSAN uncovered a scenario where a large number of DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN timeout calculation: ================================================================================ UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330 mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline] __mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445 mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307 worker_thread+0x95/0xe10 kernel/workqueue.c:2454 kthread+0x2f4/0x3b0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================================ This change limits the maximum timeout by limiting the size of the shift, which keeps all intermediate values in-bounds. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/259 Fixes: 6477dd39e62c ("mptcp: Retransmit DATA_FIN") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24selftests: mptcp: do complete cleanup at exitPaolo Abeni
After commit 05be5e273c84 ("selftests: mptcp: add disconnect tests") the mptcp selftests leave behind a couple of tmp files after each run. run_tests_disconnect() misnames a few variables used to track them. Address the issue setting the appropriate global variables Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24mptcp: accurate SIOCOUTQ for fallback socketPaolo Abeni
The MPTCP SIOCOUTQ implementation is not very accurate in case of fallback: it only measures the data in the MPTCP-level write queue, but it does not take in account the subflow write queue utilization. In case of fallback the first can be empty, while the latter is not. The above produces sporadic self-tests issues and can foul legit user-space application. Fix the issue additionally querying the subflow in case of fallback. Fixes: 644807e3e462 ("mptcp: add SIOCINQ, OUTQ and OUTQNSD ioctls") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/260 Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24riscv: fix oops caused by irqsoff latency tracerChangbin Du
The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. Signed-off-by: Changbin Du <changbin.du@gmail.com> Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
generated by cgit (git 2.34.1) at 2025-07-16 19:00:55 +0000