summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-13ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 boardSylwester Nawrocki
mach-s3c24xx/include/mach/gta02.h header file contains defines which are now not used anywhere, remove them. Cc: Nelson Castillo <arhuaco@freaks-unidos.net> Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Remove unused GPIO definitions for port JSylwester Nawrocki
There is no need now for individual GPIO port J pin control bit definitions, the GPIO0..12 pins can be configured using the gpiolib API. The GPJ* register address offset definitions for S3C2413 are moved to the common mach-s3c24xx/include/mach/regs-gpio.h header. These are still used outside of the gpio-samsung driver by PM code. Switching GPJ port to camera function can be done for example with: s3c_gpio_cfgall_range(S3C2410_GPJ(0), 13, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Remove unused GPA, GPE, GPH bank GPIO aliasesSylwester Nawrocki
There is now no more users of these compatibility definitions, so remove them. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Convert the touchscreen setup code to common GPIO APISylwester Nawrocki
Replace the S3C24XX SoC specific calls with the common gpiolib API. This removes one more user of an obsolete GPIO API. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Convert the PM code to gpiolib APISylwester Nawrocki
Replace deprecated functions with the gpiolib ones. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Convert QT2410 board file to the gpiolib APISylwester Nawrocki
Replace SoC specific GPIO functions with the gpiolib API. The LED gpio is freed right after it is configured so it can be acquired in the s3c24xx_led driver. This change is required for converting the s3c24xx_led driver to the gpiolib API. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Convert SMDK board file to the gpiolib APISylwester Nawrocki
Replace SoC specific GPIO functions with the gpiolib API. The LED gpios are freed right after they are initially configured so they can be acquired in the s3c24xx_led driver. This change is required for converting the s3c24xx_led driver to the gpiolib API. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board codeSylwester Nawrocki
The backlight gpio must not be left requested in the board code, otherwise s3c24xx_led driver can't successfully claim it. So request the backlight gpio, configure it to proper state and gpio_free right away. This change is required for converting the s3c24xx_led driver to the gpiolib API. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Correct CAMIF interrupt definitionsSylwester Nawrocki
Properly define the CAMIF interrupt resources. This device have two interrupts - corresponding to the "codec" and "preview" data paths. IRQ_CAM is handled internally by the architecture and demultiplexed to IRQ_S3C2440_CAM_C and IRQ_S3C2440_CAM_P - these interrupts only should be handled in the driver. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Correct AC97 clock control bit for S3C2440Sylwester Nawrocki
Use correct gate control bit for AC97 clock which is S3C2440_CLKCON_AC97, not S3C2440_CLKCON_CAMERA. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: ux500: Remove PMU platform registration when booting with DTLee Jones
PMU registration is successfully completed by Device Tree now, so there is no longer a requirement to register it from platform code. This patch removes platform registration during a DT boot. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Remove temporary snowball_of_platform_devs enablement structureLee Jones
All Device Tree enablement for Snowball's Platform devices; LEDs, Keys, Ethernet and all associated AB8500 Multi-Functional Devices are now complete, so here we remove any trace of adding those devices when Device Tree is enabled. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Ensure vendor specific properties have the vendor's identifierLee Jones
Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific ↵Lee Jones
prefixes Any non-standard property should contain the vendor's identifier which should be perpended onto the property name followed by a comma. This aids in name-space collision prevention. This patch ensures the sleepmode property adheres to the rules. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Move rtc-pl031 registration to Device Tree when enabledLee Jones
During a Device Tree boot, all probing will now be completed on parse of the Device Tree binary. In the same patch we remove platform registration of the Real Time Clock. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devicesLee Jones
Here we add a node for the AB8500 Real Time Clock in all devices supporting the DB8500. The AB8500 RTC driver makes use of named interrupts we provide support for this too. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device TreeLee Jones
The AB8500 driver has now been provided with IRQ domain support. This means we can request IRQs from any of it's uses via Device Tree. This patch advertises the AB8500 as an Interrupt Controller and provides the correct calls in the format the driver expects. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Apply ab8500-debug node do the db8500 DT structureLee Jones
This node has no properties. It merely allows probing of the ab8500-debugfs driver during Device Tree initialisation. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devicesLee Jones
Here we specify each of the ab8500 USB driver's seven IRQs, which the driver references by name. We also apply regulator support for the three used by the device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwmLee Jones
This adds the DT node for the misc/ab8500-pwm driver. It will allow probing of the driver during a Device Tree enabled boot. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrlLee Jones
This adds the DT node for the mfd/ab8500-sysctrl driver. It will allow probing of the driver during a Device Tree enabled boot. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Enable LED heartbeat functionality on Snowbal via DTLee Jones
This patch configures the user LED on Snowball to double flash every second or so, whilst it's still alive. This can give key indications as to what the board is doing in the case of no console output. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Enable LED heartbeat functionality on SnowballLee Jones
This patch configures the user LED on Snowball to double flash every second or so, whilst it's still alive. This can give key indications as to what the board is doing in the case of no console output. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Add support for input/ponkey into the db8500's Device TreeLee Jones
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Add a ab8500-gpadc node to the db8500 Device TreeLee Jones
This patch provides support for the ab8500-gpadc driver. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Enable the user LED on Snowball via Device TreeLee Jones
This patch enables and illuminates the user_led on the Snowball low-cost development board using DT. It also removes initialisation carried out from platform code. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Kconfig: Compile in leds-gpio support for SnowballLee Jones
Code exists in the mop500 board file (used for HREF and Snowball) to initialise Snowball's user LED via the leds-gpio driver. However, the driver isn't currently built when using the current configuration. This patch aims to change that behavior. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Provide auxdata to be used as name base clock search for nmk-i2cLee Jones
This patch provides a way for find_clk() to complete its name-based searches and still find the nmk-i2c clocks. As Device Tree has a different naming structure to that of more traditional initialisation methods, find_clk() not succeed without these bindings. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Remove unused i2c platform_data initialisation codeLee Jones
Now that u5500 is obsolete, u8500 is the only user of the Nomadik i2c driver. As such there is no requirement to differentiate between initialisation values. By the time a new SoC is released, almost all of the ux500 platform will be DT:ed, so we can make decisions based on the compatible property instead. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13ARM: ux500: Enable Device Tree support mmci for SnowballLee Jones
Allow proper initialisation for MMC via the mmci driver for the Snowball low-cost development board using DT. At the moment we continue to use DMA setup from platform code. Once the DMA generic DT bindings have been completed we can then port the remainder over to DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-13powerpc/iommu: Fix iommu pool initializationBenjamin Herrenschmidt
The iommu pool patch has a bug where it would cause a crash when using only one pool (based on the size of the DMA window). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-13ALSA: snd-usb: move calls to usb_set_interfaceDaniel Mack
The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams. Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Philipp Dreimann <philipp@dreimann.net> Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-12Input: xpad - add Andamiro Pump It Up padYuri Khan
I couldn't find the vendor ID in any of the online databases, but this mat has a Pump It Up logo on the top side of the controller compartment, and a disclaimer stating that Andamiro will not be liable on the bottom. Signed-off-by: Yuri Khan <yurivkhan@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-13ARM: SAMSUNG: fix race in s3c_adc_start for ADCTodd Poynor
Checking for adc->ts_pend already claimed should be done with the lock held. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: Update default rate for xusbxti clockTushar Behera
The rate of xusbxti clock is set in individual machine files. The default value should be defined at the clock definition and individual machine files should modify it if required. Division by zero in kernel. [<c0011849>] (unwind_backtrace+0x1/0x9c) from [<c022c663>] (Ldiv0+0x9/0x12) [<c022c663>] (Ldiv0+0x9/0x12) from [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) from [<c0019e67>] (clk_set_rate+0x2f/0x78) Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: EXYNOS: Add device tree node for EXYNOS4 interrupt combiner controllerThomas Abraham
Add node for EXYNOS4 interrupt combiner controller. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: add device tree supportThomas Abraham
Add support for device based discovery. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: Remove the 'set_level' callback from controller dataThomas Abraham
The set_level callback in the controller data, which is used to configure the slave select line, cannot be supported when migrating the driver to device tree based discovery. Since all the platforms currently use gpio as the slave select line, this callback can be removed from the controller data and replaced with call to gpio_set_value in the driver. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: Modify s3c64xx_spi{0|1|2}_set_platdata functionThomas Abraham
With the spi controller hardware configuration moved into the driver data, there are no more default hardware configuration data that is passed through platform data. Accordingly, the s3c64xx_spi{0|1|2}_set_platdata functions are adapted to these changes. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: Remove pdev pointer parameter from spi gpio setup functionsThomas Abraham
The platform data pointer that is passed to the spi gpio setup functions is not used. Hence, this parameter is removed from all the spi gpio setup functions. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: move controller information into driver dataThomas Abraham
Platform data is used to specify controller hardware specific information such as the tx/rx fifo level mask and bit offset of rx fifo level. Such information is not suitable to be supplied from device tree. Instead, it can be moved into the driver data and removed from platform data. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: remove unused S3C64XX_SPI_ST_TRLCNTZ macroThomas Abraham
The macro S3C64XX_SPI_ST_TRLCNTZ is not used and hence it is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C64XX: Add a new dma request id for device tree based dma channel lookupThomas Abraham
Commit 4972a80e16a2 (ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers) introduced a new member 'dt_dmach_prop' in the struct samsung_dma_info which is used to specify the dma channel number property as obtained from the device tree. It also introduced a new dma request id 'DMACH_DT_PROP' to indicate that a device tree node property represting the dma channel is available in 'struct samsung_dma_info'. Add dma request id 'DMACH_DT_PROP' in s3c64xx dma channel id list in order to maintain compatibility to the changes in the Samsung dma wrappper operations. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13Merge remote-tracking branch 'kumar/next' into nextBenjamin Herrenschmidt
Freescale updates for 3.6
2012-07-13powerpc/eeh: Check handle_eeh_events() return valueKleber Sacilotto de Souza
Function eeh_event_handler() dereferences the pointer returned by handle_eeh_events() without checking, causing a crash if NULL was returned, which is expected in some situations. This patch fixes this bug by checking for the value returned by handle_eeh_events() before dereferencing it. Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@vger.kernel.org [v3.4+]
2012-07-13Merge branch 'next/devel-dma-ops' into next/dt-samsungKukjin Kim
2012-07-13ARM: SAMSUNG: Introduce Kconfig variable for Samsung custom clk APIMark Brown
Make it easier to switch to the common clock API by making the existing clock API implementation depend on a Kconfig symbol which is enabled when the common clock API is disabled. This means that we can have some SoCs using the common clock API and some using the existing API rather than needing a flag day to convert the entire family of devices over. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: EXYNOS: Add missing static storage class specifier in pmu.c fileSachin Kamat
arch/arm/mach-exynos/pmu.c:318:14: warning: symbol 'exynos5_list_both_cnt_feed' was not declared. Should it be static? arch/arm/mach-exynos/pmu.c:332:14: warning: symbol 'exynos5_list_diable_wfi_wfe' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: EXYNOS: Make combiner_init function staticSachin Kamat
Fixes the following warning: arch/arm/mach-exynos/common.c:543:13: warning: symbol 'combiner_init' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: EXYNOS: Update HSOTG PHY clock setting for EXYNOS4X12Sachin Kamat
Adds clock setting entries for EXYNOS4212 and EXYNOS4412 platforms. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [fixed compilation warning which is reported by Arnd Bergmann] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit (git 2.34.1) at 2025-07-19 00:00:58 +0000