summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-01net: phy: Replace phy driver features u32 with link_mode bitmapAndrew Lunn
This is one step in allowing phylib to make use of link_mode bitmaps, instead of u32 for supported and advertised features. Convert the phy drivers to use bitmaps to indicates the features they support. Build bitmap equivalents of the u32 values at runtime, and have the drivers point to the appropriate bitmap. These bitmaps are shared, and we don't want a driver to modify them. So mark them __ro_after_init. Within phylib, the features bitmap is currently turned back into a u32. This will be removed once the whole of phylib, and the drivers are converted to use bitmaps. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: ethernet: xgbe: expand PHY_GBIT_FEAUTRESAndrew Lunn
The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to support link_modes. Remove its use from xgde by replacing it with its definition. Probably, the current behavior is wrong. It probably should be ANDing not assigning. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Add limkmode equivalents to some of the MII ethtool helpersAndrew Lunn
Add helpers which take a linkmode rather than a u32 ethtool for advertising settings. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Add helper for advertise to lcl valueAndrew Lunn
Add a helper to convert the local advertising to an LCL capabilities, which is then used to resolve pause flow control settings. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Add helper to convert MII ADV register to a linkmodeAndrew Lunn
The phy_mii_ioctl can be used to write a value into the MII_ADVERTISE register in the PHY. Since this changes the state of the PHY, we need to make the same change to phydev->advertising. Add a helper which can convert the register value to a linkmode. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Add phydev_info()Andrew Lunn
Add phydev_info() and make use of it within the phy drivers and core code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Add phydev_warn()Andrew Lunn
Not all new style LINK_MODE bits can be converted into old style SUPPORTED bits. We need to warn when such a conversion is attempted. Add a helper for this. Convert all pr_warn() calls to phydev_warn() where possible. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Move linkmode helpers to somewhere publicAndrew Lunn
phylink has some useful helpers to working with linkmode bitmaps. Move them to there own header so other code can use them. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01nfp: warn on experimental TLV typesJakub Kicinski
Reserve two TLV types for feature development, and warn in the driver if they ever leak into production. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: nixge: Address compiler warnings when building for i386Moritz Fischer
Address compiler warning reported by kbuild autobuilders when building for i386 as a result of dma_addr_t size on different architectures. warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Fixes: 7e8d5755be0e ("net: nixge: Add support for 64-bit platforms") Signed-off-by: Moritz Fischer <mdf@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2018-09-27 Here's one more Bluetooth fix for 4.19, fixing the handling of an attempt to unpair a device while pairing is in progress. Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tcp: adjust rcv zerocopy hints based on frag sizesSoheil Hassas Yeganeh
When SKBs are coalesced, we can have SKBs with different frag sizes. Some with PAGE_SIZE and some not with PAGE_SIZE. Since recv_skip_hint is always set to the full SKB size, it can overestimate the amount that should be read using normal read for coalesced packets. Change the recv_skip_hint so that it only includes the first frags that are not of PAGE_SIZE. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tcp: set recv_skip_hint when tcp_inq is less than PAGE_SIZESoheil Hassas Yeganeh
When we have less than PAGE_SIZE of data on receive queue, we set recv_skip_hint to 0. Instead, set it to the actual number of bytes available. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tipc: ignore STATE_MSG on wrong link sessionLUU Duc Canh
The initial session number when a link is created is based on a random value, taken from struct tipc_net->random. It is then incremented for each link reset to avoid mixing protocol messages from different link sessions. However, when a bearer is reset all its links are deleted, and will later be re-created using the same random value as the first time. This means that if the link never went down between creation and deletion we will still sometimes have two subsequent sessions with the same session number. In virtual environments with potentially long transmission times this has turned out to be a real problem. We now fix this by randomizing the session number each time a link is created. With a session number size of 16 bits this gives a risk of session collision of 1/64k. To reduce this further, we also introduce a sanity check on the very first STATE message arriving at a link. If this has an acknowledge value differing from 0, which is logically impossible, we ignore the message. The final risk for session collision is hence reduced to 1/4G, which should be sufficient. Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: sched: act_ipt: check for underflow in __tcf_ipt_init()Dan Carpenter
If "td->u.target_size" is larger than sizeof(struct xt_entry_target) we return -EINVAL. But we don't check whether it's smaller than sizeof(struct xt_entry_target) and that could lead to an out of bounds read. Fixes: 7ba699c604ab ("[NET_SCHED]: Convert actions from rtnetlink to new netlink API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2018-10-01 1) Make xfrmi_get_link_net() static to silence a sparse warning. From Wei Yongjun. 2) Remove a unused esph pointer definition in esp_input(). From Haishuang Yan. 3) Allow the NIC driver to quietly refuse xfrm offload in case it does not support it, the SA is created without offload in this case. From Shannon Nelson. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-10-01 1) Validate address prefix lengths in the xfrm selector, otherwise we may hit undefined behaviour in the address matching functions if the prefix is too big for the given address family. 2) Fix skb leak on local message size errors. From Thadeu Lima de Souza Cascardo. 3) We currently reset the transport header back to the network header after a transport mode transformation is applied. This leads to an incorrect transport header when multiple transport mode transformations are applied. Reset the transport header only after all transformations are already applied to fix this. From Sowmini Varadhan. 4) We only support one offloaded xfrm, so reset crypto_done after the first transformation in xfrm_input(). Otherwise we may call the wrong input method for subsequent transformations. From Sowmini Varadhan. 5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry. skb_dst_force does not really force a dst refcount anymore, it might clear it instead. xfrm code did not expect this, add a check to not dereference skb_dst() if it was cleared by skb_dst_force. 6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds read in xfrm_state_find. From Sean Tranchetti. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Merge tag 'arm64-fixes' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Will writes: "Late arm64 fixes - Fix handling of young contiguous ptes for hugetlb mappings - Fix livelock when taking access faults on contiguous hugetlb mappings - Tighten up register accesses via KVM SET_ONE_REG ioctl()s" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: KVM: Sanitize PSTATE.M when being set from userspace arm64: KVM: Tighten guest core register access from userspace arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flags arm64: hugetlb: Fix handling of young ptes
2018-10-01Merge tag 'armsoc-fixes' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Olof writes: "ARM: SoC fixes A handful of fixes that have been coming in the last couple of weeks: - Freescale fixes for on-chip accellerators - A DT fix for stm32 to avoid fallback to non-DMA SPI mode - Fixes for badly specified interrupts on BCM63xx SoCs - Allwinner A64 HDMI was incorrectly specified as fully compatble with R40 - Drive strength fix for SAMA5D2 NAND pins on one board" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update SPI6 dmas property on stm32mp157c soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift() soc: fsl: qbman: qman: avoid allocating from non existing gen_pool ARM: dts: BCM63xx: Fix incorrect interrupt specifiers MAINTAINERS: update the Annapurna Labs maintainer email ARM: dts: sun8i: drop A64 HDMI PHY fallback compatible from R40 DT ARM: dts: at91: sama5d2_ptc_ek: fix nand pinctrl
2018-10-01Merge tag 'pstore-v4.19-rc7' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Kees writes: "Pstore fixes for v4.19-rc7 - Fix failure-path memory leak in ramoops_init (nixiaoming)" * tag 'pstore-v4.19-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Fix failure-path memory leak in ramoops_init
2018-10-01Merge tag 'mlx5e-updates-2018-10-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-10-01 This series includes updates to mlx5e ethernet netdevice driver: From Or Gerlitz: 1) Support masks for l3/l4 filters in ethtool flow steering 2) Report checksum unnecessary also when the L3 checksum flag on the cqe is set and there's no L4 header 3) Allow reporting of checksum unnecessary, using an ethtool private flag. From Gavi Teitz and Or, VF representors netdevs performance improvements 4) Allow striding RQ in VF representor and bigger RQ size, ~3X performance improvement 5) Enable stateless offloads for VF representor, csum and TSO, 1.5X performance improvement 6) RSS Support for VF representors 6.1) Allow flow table destination fir VF representor steering rule. 6.2) Create RSS flow table per representor netdev 6.3) Expose mlx5e RSS ethtool to be used by representor netdevs 6.4) Enable multi-queue and RSS for VF representors, using mlx5e existing infrastructure for managing a multi-queue RX RSS tables. From Alaa Hleihel: 7) Cache the system image guid, The system image guid is a read-only field Read this once and save it on the core device. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tcp: start receiver buffer autotuning soonerYuchung Cheng
Previously receiver buffer auto-tuning starts after receiving one advertised window amount of data. After the initial receiver buffer was raised by patch a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB"), the reciver buffer may take too long to start raising. To address this issue, this patch lowers the initial bytes expected to receive roughly the expected sender's initial window. Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-10-01 This series contains updates to ice driver only. Anirudh provides several changes to "prep" the driver for upcoming features. Specifically, the functions that are used for PF VSI/netdev setup will also be used in SR-IOV support and to allow the reuse of these functions, code needs to move. Dave provides the only other change in the series, updates the driver to protect the reset patch in its entirety. This is done by adding the various bit checks to determine if a reset is scheduled/initiated and whether it came from the software or firmware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01tcp/dccp: fix lockdep issue when SYN is backloggedEric Dumazet
In normal SYN processing, packets are handled without listener lock and in RCU protected ingress path. But syzkaller is known to be able to trick us and SYN packets might be processed in process context, after being queued into socket backlog. In commit 06f877d613be ("tcp/dccp: fix other lockdep splats accessing ireq_opt") I made a very stupid fix, that happened to work mostly because of the regular path being RCU protected. Really the thing protecting ireq->ireq_opt is RCU read lock, and the pseudo request refcnt is not relevant. This patch extends what I did in commit 449809a66c1d ("tcp/dccp: block BH for SYN processing") by adding an extra rcu_read_{lock|unlock} pair in the paths that might be taken when processing SYN from socket backlog (thus possibly in process context) Fixes: 06f877d613be ("tcp/dccp: fix other lockdep splats accessing ireq_opt") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) Skip ip_sabotage_in() for packet making into the VRF driver, otherwise packets are dropped, from David Ahern. 2) Clang compilation warning uncovering typo in the nft_validate_register_store() call from nft_osf, from Stefan Agner. 3) Double sizeof netlink message length calculations in ctnetlink, from zhong jiang. 4) Missing rb_erase() on batch full in rbtree garbage collector, from Taehee Yoo. 5) Calm down compilation warning in nf_hook(), from Florian Westphal. 6) Missing check for non-null sk in xt_socket before validating netns procedence, from Flavio Leitner. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01ice: Change pf state behavior to protect reset pathDave Ertman
Currently, there is no bit, or set of bits, that protect the entirety of the reset path. If the reset is originated by the driver, then the relevant one of the following bits will be set when the reset is scheduled: __ICE_PFR_REQ __ICE_CORER_REQ __ICE_GLOBR_REQ This bit will not be cleared until after the rebuild has completed. If the reset is originated by the FW, then the first the driver knows of it will be the reception of the OICR interrupt. The __ICE_RESET_OICR_RECV bit will be set in the interrupt handler. This will also be the indicator in a SW originated reset that we have completed the pre-OICR tasks and have informed the FW that a reset was requested. To utilize these bits, change the function: ice_is_reset_recovery_pending() to be: ice_is_reset_in_progress() The new function will check all of the above bits in the pf->state and will return a true if one or more of these bits are set. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 7/7Anirudh Venkataramanan
This patch completes the code move out of ice_main.c The following top level functions and related dependency functions) were moved to ice_lib.c: ice_vsi_setup ice_vsi_cfg_tc The following functions were made static again: ice_vsi_setup_vector_base ice_vsi_alloc_q_vectors ice_vsi_get_qs void ice_vsi_map_rings_to_vectors ice_vsi_alloc_rings ice_vsi_set_rss_params ice_vsi_set_num_qs ice_get_free_slot ice_vsi_init ice_vsi_alloc_arrays Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 6/7Anirudh Venkataramanan
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_setup_vector_base ice_vsi_alloc_q_vectors ice_vsi_get_qs The following functions were made static again: ice_vsi_free_arrays ice_vsi_clear_rings Also, in this patch, the netdev and NAPI registration logic was de-coupled from the VSI creation logic (ice_vsi_setup) as for SR-IOV, while we want to create VF VSIs using ice_vsi_setup, we don't want to create netdevs. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 5/7Anirudh Venkataramanan
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_clear ice_vsi_close ice_vsi_free_arrays ice_vsi_map_rings_to_vectors Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 4/7Anirudh Venkataramanan
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_alloc_rings ice_vsi_set_rss_params ice_vsi_set_num_qs ice_get_free_slot ice_vsi_init ice_vsi_clear_rings ice_vsi_alloc_arrays Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 3/7Anirudh Venkataramanan
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_delete ice_free_res ice_get_res ice_is_reset_recovery_pending ice_vsi_put_qs ice_vsi_dis_irq ice_vsi_free_irq ice_vsi_free_rx_rings ice_vsi_free_tx_rings ice_msix_clean_rings Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 2/7Anirudh Venkataramanan
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_start_rx_rings ice_vsi_stop_rx_rings ice_vsi_stop_tx_rings ice_vsi_cfg_rxqs ice_vsi_cfg_txqs ice_vsi_cfg_msix Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 1/7Anirudh Venkataramanan
The functions that are used for PF VSI/netdev setup will also be used for SR-IOV support. To allow reuse of these functions, move these functions out of ice_main.c to ice_common.c/ice_lib.c This move is done across multiple patches. Each patch moves a few functions and may have minor adjustments. For example, a function that was previously static in ice_main.c will be made non-static temporarily in its new location to allow the driver to build cleanly. These adjustments will be removed in subsequent patches where more code is moved out of ice_main.c In this particular patch, the following functions were moved out of ice_main.c: int ice_add_mac_to_list ice_free_fltr_list ice_stat_update40 ice_stat_update32 ice_update_eth_stats ice_vsi_add_vlan ice_vsi_kill_vlan ice_vsi_manage_vlan_insertion ice_vsi_manage_vlan_stripping Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01net/mlx5: Cache the system image guidAlaa Hleihel
The system image guid is a read-only field which is used by the TC offloads code to determine if two mlx5 devices belong to the same ASIC while adding flows. Read this once and save it on the core device rather than querying each time an offloaded flow is added. Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Allow reporting of checksum unnecessaryOr Gerlitz
Currently we practically never report checksum unnecessary, because for all IP packets we take the checksum complete path. Enable non-default runs with reprorting checksum unnecessary, using an ethtool private flag. This can be useful for performance evals and other explorations. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Enable reporting checksum unnecessary also for L3 packetsOr Gerlitz
We can report checksum unnecessary also when the L3 checksum flag on the cqe is set and there's no L4 header. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Add ethtool control of ring params to VF representorsGavi Teitz
Added ethtool control to the representors for setting and querying the ring params. Signed-off-by: Gavi Teitz <gavi@mellanox.com>
2018-10-01net/mlx5e: Enable multi-queue and RSS for VF representorsGavi Teitz
Increased the amount of channels the representors can open to be the amount of CPUs. The default amount opened remains one. Used the standard NIC netdev functions to: * Set RSS params when building the representors' params. * Setup an indirect TIR and RQT for the representors upon initialization. * Create a TTC flow table for the representors' indirect TIR (when creating the TTC table, mlx5e_set_ttc_basic_params() is not called, in order to avoid setting the inner_ttc param, which is not needed). Added ethtool control to the representors for setting and querying the amount of open channels. Additionally, included logic in the representors' ethtool set channels handler which controls a representor's vport rx rule, so that if there is one open channel the rx rule steers traffic to the representor's direct TIR, whereas if there is more than one channel, the rx rule steers traffic to the new TTC flow table. Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Expose ethtool rss key size / indirection table functionsOr Gerlitz
Towards enabling RSS for the vport representors, expose the functions for querying the rss hash key size and indirection table size via ethtool. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Expose function for building RSS paramsGavi Teitz
Towards enabling RSS for the vport representors, extract the procedure for building a device's RSS params, and expose the function. Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Provide explicit directive if to create inner indirect tirsOr Gerlitz
Change the driver functions that deal with creating indirect tirs to get a flag telling if inner ttc is desired. A pre-step for enabling rss on the vport representors, where inner ttc is not needed. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5: E-Switch, Provide flow dest when creating vport rx ruleGavi Teitz
Currently the destination for the representor e-switch rx rule is a TIR number. Towards changing that to potentially be a flow table, as part of enabling RSS for representors, modify the signature of the related e-switch API to get a flow destination. Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Extract creation of rep's default flow ruleGavi Teitz
Cleaning up the flow of the representors' rx initialization, towards enabling RSS for the representors. Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Enable stateless offloads for VF representor netdevsGavi Teitz
Enabled checksum and TSO offloads for the representors, in order to increase their performance, which is required to increase the performance of flows that cannot be offloaded. Checksum offloads contribute to a general acceleration of all traffic (to around 150%), whereas the TSO offload contributes to a prominent acceleration of the representor's TX for traffic flows with larger than MTU sized packets (to around 200%). This is the usual case for TCP streams, as the PF, which serves as the uplink representor, and the VF representors employ GRO before forwarding the packets to the representor. GRO was enabled implicitly for the representors beforehand, and is explicitly enabled here to ensure that the representors preserve the performance boost it provides (of around 200%) when working in tandem with the TSO offload by the forwardee, which is the standard case as both the PF and the VF representors employ HW TSO. The impact of these changes can be seen in the following measurements taken on a setup of a VM over a VF, connected to OVS via the VF representor, to an external host: Before current changes: TCP Throughput [Gb/s] External host to VM ~ 10.5 VM to external host ~ 23.5 With just checksum offloads enabled: TCP Throughput [Gb/s] External host to VM ~ 14.9 VM to external host ~ 28.5 With the TSO offload also enabled: TCP Throughput [Gb/s] External host to VM ~ 30.5 Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Change VF representors' RQ typeGavi Teitz
The representors' RQ size was not large enough for them to achieve high enough performance, and therefore needed to be enlarged, while suffering a minimum hit to its memory usage. To achieve this the representors RQ size was increased, and its type was changed to be a striding RQ if it is supported. Towards that goal the following changes were made: * Extracted the sequence for setting the standard netdev's RQ parmas into a function * Replaced the sequence for setting the representor's RQ params with the standard sequence The impact of this change can be seen in the following measurements taken on a setup of a VM over a VF, connected to OVS via the VF representor, to an external host: Before current change: TCP Throughput [Gb/s] VM to external host ~ 7.2 With the current change (measured with a striding RQ): TCP Throughput [Gb/s] VM to external host ~ 23.5 Each representor now consumes 2 [MB] of memory for its packet buffers. Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Ethtool steering, Support masks for l3/l4 filtersOr Gerlitz
Allow using partial masks for L3 addresses and L4 ports across the place. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Set vlan masks for all offloaded TC rulesJianbo Liu
In flow steering, if asked to, the hardware matches on the first ethertype which is not vlan. It's possible to set a rule as follows, which is meant to match on untagged packet, but will match on a vlan packet: tc filter add dev eth0 parent ffff: protocol ip flower ... To avoid this for packets with single tag, we set vlan masks to tell hardware to check the tags for every matched packet. Fixes: 095b6cfd69ce ('net/mlx5e: Add TC vlan match parsing') Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5: E-Switch, Fix out of bound access when setting vport rateEran Ben Elisha
The code that deals with eswitch vport bw guarantee was going beyond the eswitch vport array limit, fix that. This was pointed out by the kernel address sanitizer (KASAN). The error from KASAN log: [2018-09-15 15:04:45] BUG: KASAN: slab-out-of-bounds in mlx5_eswitch_set_vport_rate+0x8c1/0xae0 [mlx5_core] Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rulesAlaa Hleihel
If the peer device was already unbound, then do not attempt to modify it's resources, otherwise we will crash on dereferencing non-existing device. Fixes: 5c65c564c962 ("net/mlx5e: Support offloading TC NIC hairpin flows") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01Merge tag 'iwlwifi-next-for-kalle-2018-09-28' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Second set of iwlwifi patches for 4.20 * TKIP implementation in new devices; * Fix for the shared antenna setting in 22000 series; * Report that we set the RU offset in HE code; * Fix some register addresses in 22000 series; * Fix one FW feature TLV that had a conflict with another value; * A couple of fixes for SoftAP mode; * Work continues for new 22560 hardware; * Some fixes in the datapath; * Some debugging and other general fixes; * Some cleanups, small improvements and other general fixes;
generated by cgit (git 2.34.1) at 2025-07-16 19:03:54 +0000