summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-12selftests: pmtu.sh: use $ksft_skip for skipped return codePo-Hsu Lin
This test uses return code 2 as a hard-coded skipped state, let's use the kselftest framework skip code variable $ksft_skip instead to make it more readable and easier to maintain. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12mptcp: fix static checker warnings in mptcp_pm_add_timerGeliang Tang
Fix the following Smatch complaint: net/mptcp/pm_netlink.c:213 mptcp_pm_add_timer() warn: variable dereferenced before check 'msk' (see line 208) net/mptcp/pm_netlink.c 207 struct mptcp_sock *msk = entry->sock; 208 struct sock *sk = (struct sock *)msk; 209 struct net *net = sock_net(sk); ^^ "msk" dereferenced here. 210 211 pr_debug("msk=%p", msk); 212 213 if (!msk) ^^^^ Too late. 214 return; 215 Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Link: https://lore.kernel.org/r/078a2ef5bdc4e3b2c25ef852461692001f426495.1604976945.git.geliangtang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12vrf: Fix fast path output packet handling with async Netfilter rulesMartin Willi
VRF devices use an optimized direct path on output if a default qdisc is involved, calling Netfilter hooks directly. This path, however, does not consider Netfilter rules completing asynchronously, such as with NFQUEUE. The Netfilter okfn() is called for asynchronously accepted packets, but the VRF never passes that packet down the stack to send it out over the slave device. Using the slower redirect path for this seems not feasible, as we do not know beforehand if a Netfilter hook has asynchronously completing rules. Fix the use of asynchronously completing Netfilter rules in OUTPUT and POSTROUTING by using a special completion function that additionally calls dst_output() to pass the packet down the stack. Also, slightly adjust the use of nf_reset_ct() so that is called in the asynchronous case, too. Fixes: dcdd43c41e60 ("net: vrf: performance improvements for IPv4") Fixes: a9ec54d1b0cd ("net: vrf: performance improvements for IPv6") Signed-off-by: Martin Willi <martin@strongswan.org> Link: https://lore.kernel.org/r/20201106073030.3974927-1-martin@strongswan.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12NFS: Remove unnecessary inode lock in nfs_fsync_dir()Trond Myklebust
nfs_inc_stats() is already thread-safe, and there are no other reasons to hold the inode lock here. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-12NFS: Remove unnecessary inode locking in nfs_llseek_dir()Trond Myklebust
Remove the contentious inode lock, and instead provide thread safety using the file->f_lock spinlock. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-12NFS: Fix listxattr receive buffer sizeChuck Lever
Certain NFSv4.2/RDMA tests fail with v5.9-rc1. rpcrdma_convert_kvec() runs off the end of the rl_segments array because rq_rcv_buf.tail[0].iov_len holds a very large positive value. The resultant kernel memory corruption is enough to crash the client system. Callers of rpc_prepare_reply_pages() must reserve an extra XDR_UNIT in the maximum decode size for a possible XDR pad of the contents of the xdr_buf's pages. That guarantees the allocated receive buffer will be large enough to accommodate the usual contents plus that XDR pad word. encode_op_hdr() cannot add that extra word. If it does, xdr_inline_pages() underruns the length of the tail iovec. Fixes: 3e1f02123fba ("NFSv4.2: add client side XDR handling for extended attributes") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-12NFSv4.2: fix failure to unregister shrinkerJ. Bruce Fields
We forgot to unregister the nfs4_xattr_large_entry_shrinker. That leaves the global list of shrinkers corrupted after unload of the nfs module, after which possibly unrelated code that calls register_shrinker() or unregister_shrinker() gets a BUG() with "supervisor write access in kernel mode". And similarly for the nfs4_xattr_large_entry_lru. Reported-by: Kris Karas <bugs-a17@moonlit-rail.com> Tested-By: Kris Karas <bugs-a17@moonlit-rail.com> Fixes: 95ad37f90c33 "NFSv4.2: add client side xattr caching." Signed-off-by: J. Bruce Fields <bfields@redhat.com> CC: stable@vger.kernel.org Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-11-12Merge branches 'acpi-scan', 'acpi-misc', 'acpi-button' and 'acpi-dptf'Rafael J. Wysocki
* acpi-scan: ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name * acpi-misc: ACPI: GED: fix -Wformat ACPI: Fix whitespace inconsistencies * acpi-button: ACPI: button: Add DMI quirk for Medion Akoya E2228T * acpi-dptf: ACPI: DPTF: Support Alder Lake
2020-11-11bpf: Fix NULL dereference in bpf_task_storageMartin KaFai Lau
In bpf_pid_task_storage_update_elem(), it missed to test the !task_storage_ptr(task) which then could trigger a NULL pointer exception in bpf_local_storage_update(). Fixes: 4cf1bc1f1045 ("bpf: Implement task local storage") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Roman Gushchin <guro@fb.com> Acked-by: KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/bpf/20201112001919.2028357-1-kafai@fb.com
2020-11-11net: dsa: mv88e6xxx: Add helper to get a chip's max_vidTobias Waldekranz
Most of the other chip info constants have helpers to get at them; add one for max_vid to keep things consistent. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201110185720.18228-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11cosa: Add missing kfree in error path of cosa_writeWang Hai
If memory allocation for 'kbuf' succeed, cosa_write() doesn't have a corresponding kfree() in exception handling. Thus add kfree() for this function implementation. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz> Link: https://lore.kernel.org/r/20201110144614.43194-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ipv4: Set nexthop flags in a more consistent wayIdo Schimmel
Be more consistent about the way in which the nexthop flags are set and set them in one go. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201110102553.1924232-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11drivers: net: sky2: Fix -Wstringop-truncation with W=1Andrew Lunn
In function ‘strncpy’, inlined from ‘sky2_name’ at drivers/net/ethernet/marvell/sky2.c:4903:3, inlined from ‘sky2_probe’ at drivers/net/ethernet/marvell/sky2.c:5049:2: ./include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] None of the device names are 16 characters long, so it was never an issue. But replace the strncpy with an snprintf() to prevent the theoretical overflow. Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20201110023222.1479398-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11MAINTAINERS: Add entry for Hirschmann Hellcreek Switch DriverKurt Kanzenbach
Add myself to cover the Hirschmann Hellcreek TSN Ethernet Switch Driver. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201110071829.7467-1-kurt@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: switch to the kernel.org patchwork instanceJakub Kicinski
Move to the kernel.org patchwork instance, it has significantly lower latency for accessing from Europe and the US. Other quirks include the reply bot. Link: https://lore.kernel.org/r/20201110035120.642746-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11Merge branch 'net-evaluate-net-ipvX-conf-all-sysctls'Jakub Kicinski
Vincent Bernat says: ==================== net: evaluate net.ipvX.conf.all.* sysctls Some per-interface sysctls are ignoring the "all" variant. This patchset fixes some of them when such a sysctl is handled as a boolean. This includes: - net.ipvX.conf.all.disable_policy - net.ipvX.conf.all.disable_policy.disable_xfrm - net.ipv4.conf.all.proxy_arp_pvlan - net.ipvX.conf.all.ignore_routes_with_linkdown Two sysctls are still ignoring the "all" variant as it wouldn't make much sense for them: - net.ipv4.conf.all.tag - net.ipv4.conf.all.medium_id Ideally, the "all" variant should be removed, but there is no simple alternative to DEVINET_SYSCTL_* macros that would allow one to not expose and "all" entry. ==================== Link: https://lore.kernel.org/r/20201107193515.1469030-1-vincent@bernat.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: evaluate net.ipvX.conf.all.disable_policy and disable_xfrmVincent Bernat
The disable_policy and disable_xfrm are a per-interface sysctl to disable IPsec policy or encryption on an interface. However, while a "all" variant is exposed, it was a noop since it was never evaluated. We use the usual "or" logic for this kind of sysctls. Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: evaluate net.ipv4.conf.all.proxy_arp_pvlanVincent Bernat
Introduced in 65324144b50b, the "proxy_arp_vlan" sysctl is a per-interface sysctl to tune proxy ARP support for private VLANs. While the "all" variant is exposed, it was a noop and never evaluated. We use the usual "or" logic for this kind of sysctls. Fixes: 65324144b50b ("net: RFC3069, private VLAN proxy arp support") Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: evaluate net.ipvX.conf.all.ignore_routes_with_linkdownVincent Bernat
Introduced in 0eeb075fad73, the "ignore_routes_with_linkdown" sysctl ignores a route whose interface is down. It is provided as a per-interface sysctl. However, while a "all" variant is exposed, it was a noop since it was never evaluated. We use the usual "or" logic for this kind of sysctls. Tested with: ip link add type veth # veth0 + veth1 ip link add type veth # veth1 + veth2 ip link set up dev veth0 ip link set up dev veth1 # link-status paired with veth0 ip link set up dev veth2 ip link set up dev veth3 # link-status paired with veth2 # First available path ip -4 addr add 203.0.113.${uts#H}/24 dev veth0 ip -6 addr add 2001:db8:1::${uts#H}/64 dev veth0 # Second available path ip -4 addr add 192.0.2.${uts#H}/24 dev veth2 ip -6 addr add 2001:db8:2::${uts#H}/64 dev veth2 # More specific route through first path ip -4 route add 198.51.100.0/25 via 203.0.113.254 # via veth0 ip -6 route add 2001:db8:3::/56 via 2001:db8:1::ff # via veth0 # Less specific route through second path ip -4 route add 198.51.100.0/24 via 192.0.2.254 # via veth2 ip -6 route add 2001:db8:3::/48 via 2001:db8:2::ff # via veth2 # H1: enable on "all" # H2: enable on "veth0" for v in ipv4 ipv6; do case $uts in H1) sysctl -qw net.${v}.conf.all.ignore_routes_with_linkdown=1 ;; H2) sysctl -qw net.${v}.conf.veth0.ignore_routes_with_linkdown=1 ;; esac done set -xe # When veth0 is up, best route is through veth0 ip -o route get 198.51.100.1 | grep -Fw veth0 ip -o route get 2001:db8:3::1 | grep -Fw veth0 # When veth0 is down, best route should be through veth2 on H1/H2, # but on veth0 on H2 ip link set down dev veth1 # down veth0 ip route show [ $uts != H3 ] || ip -o route get 198.51.100.1 | grep -Fw veth0 [ $uts != H3 ] || ip -o route get 2001:db8:3::1 | grep -Fw veth0 [ $uts = H3 ] || ip -o route get 198.51.100.1 | grep -Fw veth2 [ $uts = H3 ] || ip -o route get 2001:db8:3::1 | grep -Fw veth2 Without this patch, the two last lines would fail on H1 (the one using the "all" sysctl). With the patch, everything succeeds as expected. Also document the sysctl in `ip-sysctl.rst`. Fixes: 0eeb075fad73 ("net: ipv4 sysctl option to ignore routes when nexthop link is down") Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11Merge branch 'cxgb4-ch_ktls-fixes-in-nic-tls-code'Jakub Kicinski
Rohit Maheshwari says: ==================== cxgb4/ch_ktls: Fixes in nic tls code This series helps in fixing multiple nic ktls issues. Series is broken into 12 patches. Patch 1 avoids deciding tls packet based on decrypted bit. If its a retransmit packet which has tls handshake and finish (for encryption), decrypted bit won't be set there, and so we can't rely on decrypted bit. Patch 2 helps supporting linear skb. SKBs were assumed non-linear. Corrected the length extraction. Patch 3 fixes the checksum offload update in WR. Patch 4 fixes kernel panic happening due to creating new skb for each record. As part of fix driver will use same skb to send out one tls record (partial data) of the same SKB. Patch 5 fixes the problem of skb data length smaller than remaining data of the record. Patch 6 fixes the handling of SKBs which has tls header alone pkt, but not starting from beginning. Patch 7 avoids sending extra data which is used to make a record 16 byte aligned. We don't need to retransmit those extra few bytes. Patch 8 handles the cases where retransmit packet has tls starting exchanges which are prior to tls start marker. Patch 9 fixes the problem os skb free before HW knows about tcp FIN. Patch 10 handles the small packet case which has partial TAG bytes only. HW can't handle those, hence using sw crypto for such pkts. Patch 11 corrects the potential tcb update problem. Patch 12 stops the queue if queue reaches threshold value. v1->v2: - Corrected fixes tag issue. - Marked chcr_ktls_sw_fallback() static. v2->v3: - Replaced GFP_KERNEL with GFP_ATOMIC. - Removed mixed fixes. v3->v4: - Corrected fixes tag issue. v4->v5: - Separated mixed fixes from patch 4. v5-v6: - Fixes tag should be at the end. ==================== Link: https://lore.kernel.org/r/20201109105142.15398-1-rohitm@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls: stop the txq if reaches thresholdRohit Maheshwari
Stop the queue and ask for the credits if queue reaches to threashold. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls: tcb update fails sometimesRohit Maheshwari
context id and port id should be filled while sending tcb update. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls/cxgb4: handle partial tag alone SKBsRohit Maheshwari
If TCP congestion caused a very small packets which only has some part fo the TAG, and that too is not till the end. HW can't handle such case, so falling back to sw crypto in such cases. v1->v2: - Marked chcr_ktls_sw_fallback() static. Fixes: dc05f3df8fac ("chcr: Handle first or middle part of record") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls: don't free skb before sending FINRohit Maheshwari
If its a last packet and fin is set. Make sure FIN is informed to HW before skb gets freed. Fixes: 429765a149f1 ("chcr: handle partial end part of a record") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls: packet handling prior to start markerRohit Maheshwari
There could be a case where ACK for tls exchanges prior to start marker is missed out, and by the time tls is offloaded. This pkt should not be discarded and handled carefully. It could be plaintext alone or plaintext + finish as well. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls: Correction in middle record handlingRohit Maheshwari
If a record starts in middle, reset TCB UNA so that we could avoid sending out extra packet which is needed to make it 16 byte aligned to start AES CTR. Check also considers prev_seq, which should be what is actually sent, not the skb data length. Avoid updating partial TAG to HW at any point of time, that's why we need to check if remaining part is smaller than TAG size, then reset TX_MAX to be TAG starting sequence number. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls: missing handling of header aloneRohit Maheshwari
If an skb has only header part which doesn't start from beginning, is not being handled properly. Fixes: dc05f3df8fac ("chcr: Handle first or middle part of record") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls: Correction in trimmed_len calculationRohit Maheshwari
trimmed length calculation goes wrong if skb has only tag part to send. It should be zero if there is no data bytes apart from TAG. Fixes: dc05f3df8fac ("chcr: Handle first or middle part of record") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11cxgb4/ch_ktls: creating skbs causes panicRohit Maheshwari
Creating SKB per tls record and freeing the original one causes panic. There will be race if connection reset is requested. By freeing original skb, refcnt will be decremented and that means, there is no pending record to send, and so tls_dev_del will be requested in control path while SKB of related connection is in queue. Better approach is to use same SKB to send one record (partial data) at a time. We still have to create a new SKB when partial last part of a record is requested. This fix introduces new API cxgb4_write_partial_sgl() to send partial part of skb. Present cxgb4_write_sgl can only provide feasibility to start from an offset which limits to header only and it can write sgls for the whole skb len. But this new API will help in both. It can start from any offset and can end writing in middle of the skb. v4->v5: - Removed extra changes. Fixes: 429765a149f1 ("chcr: handle partial end part of a record") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls: Update cheksum informationRohit Maheshwari
Checksum update was missing in the WR. Fixes: 429765a149f1 ("chcr: handle partial end part of a record") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11ch_ktls: Correction in finding correct lengthRohit Maheshwari
There is a possibility of linear skbs coming in. Correcting the length extraction logic. v2->v3: - Separated un-related changes from this patch. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11cxgb4/ch_ktls: decrypted bit is not enoughRohit Maheshwari
If skb has retransmit data starting before start marker, e.g. ccs, decrypted bit won't be set for that, and if it has some data to encrypt, then it must be given to crypto ULD. So in place of decrypted, check if socket is tls offloaded. Also, unless skb has some data to encrypt, no need to give it for tls offload handling. v2->v3: - Removed ifdef. Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11Merge branch 'net-qrtr-add-distant-node-support'Jakub Kicinski
Loic Poulain says: ==================== net: qrtr: Add distant node support QRTR protocol allows a node to communicate with an other non-immediate node via an intermdediate immediate node acting as a 'bridge': node-0 <=> node-1 <=> node-2 This is currently not supported in this upstream version and this series aim to fix that. This series is V2 because changes 1, 2 and 3 have already been submitted separately on LKML. Changes in v2: - Add reviewed-by tags from Bjorn and Mani - Fixing checkpatch issue reported by Jakub ==================== Link: https://lore.kernel.org/r/1604684010-24090-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: qrtr: Release distant nodes along the bridge nodeLoic Poulain
Distant QRTR nodes can be accessed via an other node that acts as a bridge. When the a QRTR endpoint associated to a bridge node is released, all the linked distant nodes should also be released. This patch fixes endpoint release by: - Submitting QRTR BYE message locally on behalf of all the nodes accessible through the endpoint. - Removing all the routable node IDs from radix tree pointing to the released node endpoint. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: qrtr: Add GFP flags parameter to qrtr_alloc_ctrl_packetLoic Poulain
This will be requested for allocating control packet in atomic context. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: qrtr: Allow non-immediate node routingLoic Poulain
In order to reach non-immediate remote node services that are accessed through an intermediate node, the route to the remote node needs to be saved. E.g for a [node1 <=> node2 <=> node3] network - node2 forwards node3 service to node1 - node1 must save node2 as route for reaching node3 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: qrtr: Allow forwarded servicesLoic Poulain
A remote endpoint (immediate neighbors node) can forward services from other nodes (non-immadiate), in that case ctrl packet node ID (offering distant service) can differ from the qrtr source node (forwarding the packet). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: qrtr: Fix port ID for control messagesLoic Poulain
The port ID for control messages was uncorrectly set with broadcast node ID value, causing message to be dropped on remote side since not passing packet filtering (cb->dst_port != QRTR_PORT_CTRL). Fixes: d27e77a3de28 ("net: qrtr: Reset the node and port ID of broadcast messages") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: stmmac: dwc-qos: Change the dwc_eth_dwmac_data's .probe prototypeJisheng Zhang
The return pointer of dwc_eth_dwmac_data's .probe isn't used, and "probe" usually return int, so change the prototype to follow standard way. Secondly, it can simplify the tegra_eqos_probe() code. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20201109160440.3a736ee3@xhacker.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net/x25: Fix null-ptr-deref in x25_connectMartin Schiller
This fixes a regression for blocking connects introduced by commit 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect"). The x25->neighbour is already set to "NULL" by x25_disconnect() now, while a blocking connect is waiting in x25_wait_for_connection_establishment(). Therefore x25->neighbour must not be accessed here again and x25->state is also already set to X25_STATE_0 by x25_disconnect(). Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reviewed-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201109065449.9014-1-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETCMichael Walle
Since commit 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") the network port of the Kontron sl28 board is broken. After the migration to phylink the device tree has to specify the in-band-mode property. Add it. Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20201109110436.5906-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11tipc: fix memory leak in tipc_topsrv_start()Wang Hai
kmemleak report a memory leak as follows: unreferenced object 0xffff88810a596800 (size 512): comm "ip", pid 21558, jiffies 4297568990 (age 112.120s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 00 83 60 b0 ff ff ff ff ..........`..... backtrace: [<0000000022bbe21f>] tipc_topsrv_init_net+0x1f3/0xa70 [<00000000fe15ddf7>] ops_init+0xa8/0x3c0 [<00000000138af6f2>] setup_net+0x2de/0x7e0 [<000000008c6807a3>] copy_net_ns+0x27d/0x530 [<000000006b21adbd>] create_new_namespaces+0x382/0xa30 [<00000000bb169746>] unshare_nsproxy_namespaces+0xa1/0x1d0 [<00000000fe2e42bc>] ksys_unshare+0x39c/0x780 [<0000000009ba3b19>] __x64_sys_unshare+0x2d/0x40 [<00000000614ad866>] do_syscall_64+0x56/0xa0 [<00000000a1b5ca3c>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 'srv' is malloced in tipc_topsrv_start() but not free before leaving from the error handling cases. We need to free it. Fixes: 5c45ab24ac77 ("tipc: make struct tipc_server private for server.c") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20201109140913.47370-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11Merge branch 'stable/for-linus-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fixes from Konrad Rzeszutek Wilk: "Two tiny fixes for issues that make drivers under Xen unhappy under certain conditions" * 'stable/for-linus-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: remove the tbl_dma_addr argument to swiotlb_tbl_map_single swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb"
2020-11-11net: phy: aquantia: do not return an error on clearing pending IRQsIoana Ciornei
The referenced commit added in .config_intr() the part of code which upon configuration of the IRQ state it also clears up any pending IRQ. If there were actually pending IRQs, a read on the IRQ status register will return something non zero. This should not result in the callback returning an error. Fix this by returning an error only when the result of the phy_read_mmd() is negative. Fixes: e11ef96d44f1 ("net: phy: aquantia: remove the use of .ack_interrupt()") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Camelia Groza <camelia.groza@nxp.com> Link: https://lore.kernel.org/r/20201109154601.3812574-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11Merge branch 'net-ipa-little-fixes'Jakub Kicinski
Alex Elder says: ==================== net: ipa: little fixes This series adds a few small fixes to the IPA code. The first patch appeared in a different form in June, and got some pushback from David because he felt a problem that can be caught at build time *should* be caught at build time. https://lore.kernel.org/netdev/20200610195332.2612233-1-elder@linaro.org/ I agree with that, but in this case the "problem" was never actually a problem. There's a little more explanation on the patch, but basically now we remove the BUILD_BUG_ON() call entirely. The second deletes a line of code that isn't needed. The third converts a warning message to be a debug, as requested by Stephen Boyd. And the last one just gets rid of an error message that would be output after a different message had already reported a problem. ==================== Link: https://lore.kernel.org/r/20201109165635.5449-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: ipa: drop an error messageAlex Elder
There is no need for gsi_modem_channel_halt() to report an error, because gsi_generic_command() will already have done that if the command times out. So get rid of the extra message. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: ipa: change a warning to debugAlex Elder
When we determine from hardware what the size of IPA memory is we compare it against what we learned about it from DT. If DT defines a region that's larger than actual memory, we use the smaller actual size and issue a warning. If DT defines a smaller region than actual memory we issue a warning too. But in this case the difference is harmless; so rather than issuing a warning, just provide a debug message instead. Reorder these checks so the one that matters more is done first. Reported-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: ipa: get rid of a useless line of codeAlex Elder
Delete a spurious line of code in ipa_hardware_config(). It reads a register value then ignores the value, so is completely unnecessary. Add a missing word in a comment. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11net: ipa: don't break build on large transaction sizeAlex Elder
The following call in ipa_validate_build() is erroneous: BUILD_BUG_ON(sizeof(struct gsi_trans) > 128); The fact is, it is not a bug for the size of a GSI transaction to be bigger than 128 bytes. The correct operation of the driver is not dependent on the size of this structure. The only consequence of the transaction being large is that the amount of memory required is larger. The problem this was trying to flag is that a *slight* increase in the size of this structure will have a disproportionate effect on the amount of memory used. E.g. if the structure grew to 132 bytes the memory requirement for the transaction arrays would be about double. With various debugging build flags enabled, the size grows to 160 bytes. But there's no reason to treat that as a build-time bug. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11Merge branch 'tools/bpftool: Some build fixes'Andrii Nakryiko
Jean-Philippe Brucker says: ==================== A few fixes for cross and out-of-tree build of bpftool and runqslower. These changes allow to build for different target architectures, using the same source tree. Since [v2], I addressed Andrii's comments on patches 3 and 5, and added patch 7 which fixes a build slowdown. [v2] https://lore.kernel.org/bpf/20201109110929.1223538-1-jean-philippe@linaro.org/ ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 14:55:30 +0000