summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-27net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPPRasmus Villemoes
It's not true that switchdev_port_obj_notify() only inspects the ->handled field of "struct switchdev_notifier_port_obj_info" if call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON() triggering for a non-zero return combined with ->handled not being true. But the real problem here is that -EOPNOTSUPP is not being properly handled. The wrapper functions switchdev_handle_port_obj_add() et al change a return value of -EOPNOTSUPP to 0, and the treatment of ->handled in switchdev_port_obj_notify() seems to be designed to change that back to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e., everybody returned -EOPNOTSUPP). Currently, as soon as some device down the stack passes the check_cb() check, ->handled gets set to true, which means that switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP. This, for example, means that the detection of hardware offload support in the MRP code is broken: switchdev_port_obj_add() used by br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP code thinks the generation of MRP test frames has been offloaded, no such frames are actually put on the wire. Similarly, br_mrp_switchdev_set_ring_role() also always returns 0, causing mrp->ring_role_offloaded to be set to 1. To fix this, continue to set ->handled true if any callback returns success or any error distinct from -EOPNOTSUPP. But if all the callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so the logic in switchdev_port_obj_notify() can propagate that information. Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API") Fixes: f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27of/device: Update dma_range_map only when dev has valid dma-rangesYong Wu
The commit e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") always update dma_range_map even though it was already set, like in the sunxi_mbus driver. the issue is reported at [1]. This patch avoid this(Updating it only when dev has valid dma-ranges). Meanwhile, dma_range_map contains the devices' dma_ranges information, This patch moves dma_range_map before of_iommu_configure. The iommu driver may need to know the dma_address requirements of its iommu consumer devices. [1] https://lore.kernel.org/linux-arm-kernel/5c7946f3-b56e-da00-a750-be097c7ceb32@arm.com/ CC: Frank Rowand <frowand.list@gmail.com> Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset"), Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210119105203.15530-1-yong.wu@mediatek.com
2021-01-27Merge branch 'parisc-5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Two small fixes: - Fix linking error with 64-bit kernel when modules are disabled, reported by kernel test robot - Remove leftover reference to power_tasklet, by Davidlohr Bueso" * 'parisc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES parisc: Remove leftover reference to the power_tasklet
2021-01-27io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLEHao Xu
Abaci reported the follow warning: [ 27.073425] do not call blocking ops when !TASK_RUNNING; state=1 set at [] prepare_to_wait_exclusive+0x3a/0xc0 [ 27.075805] WARNING: CPU: 0 PID: 951 at kernel/sched/core.c:7853 __might_sleep+0x80/0xa0 [ 27.077604] Modules linked in: [ 27.078379] CPU: 0 PID: 951 Comm: a.out Not tainted 5.11.0-rc3+ #1 [ 27.079637] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 27.080852] RIP: 0010:__might_sleep+0x80/0xa0 [ 27.081835] Code: 65 48 8b 04 25 80 71 01 00 48 8b 90 c0 15 00 00 48 8b 70 18 48 c7 c7 08 39 95 82 c6 05 f9 5f de 08 01 48 89 d1 e8 00 c6 fa ff 0b eb bf 41 0f b6 f5 48 c7 c7 40 23 c9 82 e8 f3 48 ec 00 eb a7 [ 27.084521] RSP: 0018:ffffc90000fe3ce8 EFLAGS: 00010286 [ 27.085350] RAX: 0000000000000000 RBX: ffffffff82956083 RCX: 0000000000000000 [ 27.086348] RDX: ffff8881057a0000 RSI: ffffffff8118cc9e RDI: ffff88813bc28570 [ 27.087598] RBP: 00000000000003a7 R08: 0000000000000001 R09: 0000000000000001 [ 27.088819] R10: ffffc90000fe3e00 R11: 00000000fffef9f0 R12: 0000000000000000 [ 27.089819] R13: 0000000000000000 R14: ffff88810576eb80 R15: ffff88810576e800 [ 27.091058] FS: 00007f7b144cf740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 27.092775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.093796] CR2: 00000000022da7b8 CR3: 000000010b928002 CR4: 00000000003706f0 [ 27.094778] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.095780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.097011] Call Trace: [ 27.097685] __mutex_lock+0x5d/0xa30 [ 27.098565] ? prepare_to_wait_exclusive+0x71/0xc0 [ 27.099412] ? io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.100441] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0 [ 27.101537] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 27.102656] ? trace_hardirqs_on+0x46/0x110 [ 27.103459] ? io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.104317] io_cqring_overflow_flush.part.101+0x6d/0x70 [ 27.105113] io_cqring_wait+0x36e/0x4d0 [ 27.105770] ? find_held_lock+0x28/0xb0 [ 27.106370] ? io_uring_remove_task_files+0xa0/0xa0 [ 27.107076] __x64_sys_io_uring_enter+0x4fb/0x640 [ 27.107801] ? rcu_read_lock_sched_held+0x59/0xa0 [ 27.108562] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0 [ 27.109684] ? syscall_enter_from_user_mode+0x26/0x70 [ 27.110731] do_syscall_64+0x2d/0x40 [ 27.111296] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 27.112056] RIP: 0033:0x7f7b13dc8239 [ 27.112663] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48 [ 27.115113] RSP: 002b:00007ffd6d7f5c88 EFLAGS: 00000286 ORIG_RAX: 00000000000001aa [ 27.116562] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b13dc8239 [ 27.117961] RDX: 000000000000478e RSI: 0000000000000000 RDI: 0000000000000003 [ 27.118925] RBP: 00007ffd6d7f5cb0 R08: 0000000020000040 R09: 0000000000000008 [ 27.119773] R10: 0000000000000001 R11: 0000000000000286 R12: 0000000000400480 [ 27.120614] R13: 00007ffd6d7f5d90 R14: 0000000000000000 R15: 0000000000000000 [ 27.121490] irq event stamp: 5635 [ 27.121946] hardirqs last enabled at (5643): [] console_unlock+0x5c4/0x740 [ 27.123476] hardirqs last disabled at (5652): [] console_unlock+0x4e7/0x740 [ 27.125192] softirqs last enabled at (5272): [] __do_softirq+0x3c5/0x5aa [ 27.126430] softirqs last disabled at (5267): [] asm_call_irq_on_stack+0xf/0x20 [ 27.127634] ---[ end trace 289d7e28fa60f928 ]--- This is caused by calling io_cqring_overflow_flush() which may sleep after calling prepare_to_wait_exclusive() which set task state to TASK_INTERRUPTIBLE Reported-by: Abaci <abaci@linux.alibaba.com> Fixes: 6c503150ae33 ("io_uring: patch up IOPOLL overflow_flush sync") Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27Revert "block: simplify set_init_blocksize" to regain lost performanceMaxim Mikityanskiy
The cited commit introduced a serious regression with SATA write speed, as found by bisecting. This patch reverts this commit, which restores write speed back to the values observed before this commit. The performance tests were done on a Helios4 NAS (2nd batch) with 4 HDDs (WD8003FFBX) using dd (bs=1M count=2000). "Direct" is a test with a single HDD, the rest are different RAID levels built over the first partitions of 4 HDDs. Test results are in MB/s, R is read, W is write. | Direct | RAID0 | RAID10 f2 | RAID10 n2 | RAID6 ----------------+--------+-------+-----------+-----------+-------- 9011495c9466 | R:256 | R:313 | R:276 | R:313 | R:323 (before faulty) | W:254 | W:253 | W:195 | W:204 | W:117 ----------------+--------+-------+-----------+-----------+-------- 5ff9f19231a0 | R:257 | R:398 | R:312 | R:344 | R:391 (faulty commit) | W:154 | W:122 | W:67.7 | W:66.6 | W:67.2 ----------------+--------+-------+-----------+-----------+-------- 5.10.10 | R:256 | R:401 | R:312 | R:356 | R:375 unpatched | W:149 | W:123 | W:64 | W:64.1 | W:61.5 ----------------+--------+-------+-----------+-----------+-------- 5.10.10 | R:255 | R:396 | R:312 | R:340 | R:393 patched | W:247 | W:274 | W:220 | W:225 | W:121 Applying this patch doesn't hurt read performance, while improves the write speed by 1.5x - 3.5x (more impact on RAID tests). The write speed is restored back to the state before the faulty commit, and even a bit higher in RAID tests (which aren't HDD-bound on this device) - that is likely related to other optimizations done between the faulty commit and 5.10.10 which also improved the read speed. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Fixes: 5ff9f19231a0 ("block: simplify set_init_blocksize") Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabledJuergen Gross
When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT enabled as a Xen pv guest a warning is issued for each processor: [ 5.964347] ------------[ cut here ]------------ [ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90 [ 5.972321] Modules linked in: [ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75 [ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013 [ 5.984313] RIP: e030:get_trap_addr+0x59/0x90 [ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48 [ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202 [ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38 [ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40 [ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000 [ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8 [ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0 [ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000 [ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660 [ 6.028314] Call Trace: [ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90 [ 6.036313] ? asm_exc_double_fault+0x30/0x30 [ 6.040313] xen_convert_trap_info+0x87/0xd0 [ 6.044313] xen_pv_cpu_up+0x17a/0x450 [ 6.048313] bringup_cpu+0x2b/0xc0 [ 6.052313] ? cpus_read_trylock+0x50/0x50 [ 6.056313] cpuhp_invoke_callback+0x80/0x4c0 [ 6.060313] _cpu_up+0xa7/0x140 [ 6.064313] cpu_up+0x98/0xd0 [ 6.068313] bringup_nonboot_cpus+0x4f/0x60 [ 6.072313] smp_init+0x26/0x79 [ 6.076313] kernel_init_freeable+0x103/0x258 [ 6.080313] ? rest_init+0xd0/0xd0 [ 6.084313] kernel_init+0xa/0x110 [ 6.088313] ret_from_fork+0x1f/0x30 [ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]--- Reason is that there is no Xen pv trap entry for X86_TRAP_VC. Fix that by adding a generic trap handler for unknown traps and wire all unknown bare metal handlers to this generic handler, which will just crash the system in case such a trap will ever happen. Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler") Cc: <stable@vger.kernel.org> # v5.10 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-27ACPI/IORT: Do not blindly trust DMA masks from firmwareMoritz Fischer
Address issue observed on real world system with suboptimal IORT table where DMA masks of PCI devices would get set to 0 as result. iort_dma_setup() would query the root complex'/named component IORT entry for a DMA mask, and use that over the one the device has been configured with earlier. Ideally we want to use the minimum mask of what the IORT contains for the root complex and what the device was configured with. Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Signed-off-by: Moritz Fischer <mdf@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20210122012419.95010-1-mdf@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-27s390: uv: Fix sysfs max number of VCPUs reportingJanosch Frank
The number reported by the query is N-1 and I think people reading the sysfs file would expect N instead. For users creating VMs there's no actual difference because KVM's limit is currently below the UV's limit. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Fixes: a0f60f8431999 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information") Cc: stable@vger.kernel.org Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-27s390/vfio-ap: No need to disable IRQ after queue resetTony Krowiak
The queues assigned to a matrix mediated device are currently reset when: * The VFIO_DEVICE_RESET ioctl is invoked * The mdev fd is closed by userspace (QEMU) * The mdev is removed from sysfs. Immediately after the reset of a queue, a call is made to disable interrupts for the queue. This is entirely unnecessary because the reset of a queue disables interrupts, so this will be removed. Furthermore, vfio_ap_irq_disable() does an unconditional PQAP/AQIC which can result in a specification exception (when the corresponding facility is not available), so this is actually a bugfix. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> [pasic@linux.ibm.com: minor rework before merging] Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Fixes: ec89b55e3bce ("s390: ap: implement PAPQ AQIC interception in kernel") Cc: <stable@vger.kernel.org> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-27s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidatedTony Krowiak
The vfio_ap device driver registers a group notifier with VFIO when the file descriptor for a VFIO mediated device for a KVM guest is opened to receive notification that the KVM pointer is set (VFIO_GROUP_NOTIFY_SET_KVM event). When the KVM pointer is set, the vfio_ap driver takes the following actions: 1. Stashes the KVM pointer in the vfio_ap_mdev struct that holds the state of the mediated device. 2. Calls the kvm_get_kvm() function to increment its reference counter. 3. Sets the function pointer to the function that handles interception of the instruction that enables/disables interrupt processing. 4. Sets the masks in the KVM guest's CRYCB to pass AP resources through to the guest. In order to avoid memory leaks, when the notifier is called to receive notification that the KVM pointer has been set to NULL, the vfio_ap device driver should reverse the actions taken when the KVM pointer was set. Fixes: 258287c994de ("s390: vfio-ap: implement mediated device open callback") Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201223012013.5418-1-akrowiak@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-27can: dev: prevent potential information leak in can_fill_info()Dan Carpenter
The "bec" struct isn't necessarily always initialized. For example, the mcp251xfd_get_berr_counter() function doesn't initialize anything if the interface is down. Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters") Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27rtc: mc146818: Detect and handle broken RTCsThomas Gleixner
The recent fix for handling the UIP bit unearthed another issue in the RTC code. If the RTC is advertised but the readout is straight 0xFF because it's not available, the old code just proceeded with crappy values, but the new code hangs because it waits for the UIP bit to become low. Add a sanity check in the RTC CMOS probe function which reads the RTC_VALID register (Register D) which should have bit 0-6 cleared. If that's not the case then fail to register the CMOS. Add the same check to mc146818_get_time(), warn once when the condition is true and invalidate the rtc_time data. Reported-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mickaël Salaün <mic@linux.microsoft.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/87tur3fx7w.fsf@nanos.tec.linutronix.de
2021-01-27xen: Fix XenStore initialisation for XS_LOCALDavid Woodhouse
In commit 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI") I reworked the triggering of xenbus_probe(). I tried to simplify things by taking out the workqueue based startup triggered from wake_waiting(); the somewhat poorly named xenbus IRQ handler. I missed the fact that in the XS_LOCAL case (Dom0 starting its own xenstored or xenstore-stubdom, which happens after the kernel is booted completely), that IRQ-based trigger is still actually needed. So... put it back, except more cleanly. By just spawning a xenbus_probe thread which waits on xb_waitq and runs the probe the first time it gets woken, just as the workqueue-based hack did. This is actually a nicer approach for *all* the back ends with different interrupt methods, and we can switch them all over to that without the complex conditions for when to trigger it. But not in -rc6. This is the minimal fix for the regression, although it's a step in the right direction instead of doing a partial revert and actually putting the workqueue back. It's also simpler than the workqueue. Fixes: 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI") Reported-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/4c9af052a6e0f6485d1de43f2c38b1461996db99.camel@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-26io_uring: fix wqe->lock/completion_lock deadlockPavel Begunkov
Joseph reports following deadlock: CPU0: ... io_kill_linked_timeout // &ctx->completion_lock io_commit_cqring __io_queue_deferred __io_queue_async_work io_wq_enqueue io_wqe_enqueue // &wqe->lock CPU1: ... __io_uring_files_cancel io_wq_cancel_cb io_wqe_cancel_pending_work // &wqe->lock io_cancel_task_cb // &ctx->completion_lock Only __io_queue_deferred() calls queue_async_work() while holding ctx->completion_lock, enqueue drained requests via io_req_task_queue() instead. Cc: stable@vger.kernel.org # 5.9+ Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26Merge branch 'net-fec-fix-temporary-rmii-clock-reset-on-link-up'Jakub Kicinski
Laurent Badel says: ==================== net: fec: Fix temporary RMII clock reset on link up v2: fixed a compilation warning The FEC drivers performs a "hardware reset" of the MAC module when the link is reported to be up. This causes a short glitch in the RMII clock due to the hardware reset clearing the receive control register which controls the MII mode. It seems that some link partners do not tolerate this glitch, and invalidate the link, which leads to a never-ending loop of negotiation-link up-link down events. This was observed with the iMX28 Soc and LAN8720/LAN8742 PHYs, with two Intel adapters I218-LM and X722-DA2 as link partners, though a number of other link partners do not seem to mind the clock glitch. Changing the hardware reset to a software reset (clearing bit 1 of the ECR register) cured the issue. Attempts to optimize fec_restart() in order to minimize the duration of the glitch were unsuccessful. Furthermore manually producing the glitch by setting MII mode and then back to RMII in two consecutive instructions, resulting in a clock glitch <10us in duration, was enough to cause the partner to invalidate the link. This strongly suggests that the root cause of the link being dropped is indeed the change in clock frequency. In an effort to minimize changes to driver, the patch proposes to use soft reset only for tested SoCs (iMX28) and only if the link is up. This preserves hardware reset in other situations, which might be required for proper setup of the MAC. ==================== Link: https://lore.kernel.org/r/20210125100745.5090-1-laurentbadel@eaton.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26net: fec: Fix temporary RMII clock reset on link upLaurent Badel
fec_restart() does a hard reset of the MAC module when the link status changes to up. This temporarily resets the R_CNTRL register which controls the MII mode of the ENET_OUT clock. In the case of RMII, the clock frequency momentarily drops from 50MHz to 25MHz until the register is reconfigured. Some link partners do not tolerate this glitch and invalidate the link causing failure to establish a stable link when using PHY polling mode. Since as per IEEE802.3 the criteria for link validity are PHY-specific, what the partner should tolerate cannot be assumed, so avoid resetting the MII clock by using software reset instead of hardware reset when the link is up. This is generally relevant only if the SoC provides the clock to an external PHY and the PHY is configured for RMII. Signed-off-by: Laurent Badel <laurentbadel@eaton.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26net: lapb: Add locking to the lapb moduleXie He
In the lapb module, the timers may run concurrently with other code in this module, and there is currently no locking to prevent the code from racing on "struct lapb_cb". This patch adds locking to prevent racing. 1. Add "spinlock_t lock" to "struct lapb_cb"; Add "spin_lock_bh" and "spin_unlock_bh" to APIs, timer functions and notifier functions. 2. Add "bool t1timer_stop, t2timer_stop" to "struct lapb_cb" to make us able to ask running timers to abort; Modify "lapb_stop_t1timer" and "lapb_stop_t2timer" to make them able to abort running timers; Modify "lapb_t2timer_expiry" and "lapb_t1timer_expiry" to make them abort after they are stopped by "lapb_stop_t1timer", "lapb_stop_t2timer", and "lapb_start_t1timer", "lapb_start_t2timer". 3. Let lapb_unregister wait for other API functions and running timers to stop. 4. The lapb_device_event function calls lapb_disconnect_request. In order to avoid trying to hold the lock twice, add a new function named "__lapb_disconnect_request" which assumes the lock is held, and make it called by lapb_disconnect_request and lapb_device_event. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20210126040939.69995-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26ARM: zImage: atags_to_fdt: Fix node names on added root nodesRob Herring
Commit 7536c7e03e74 ("of/fdt: Remove redundant kbasename function call") exposed a bug creating DT nodes in the ATAGS to DT fixup code. Non-existent nodes would mistaken get created with a leading '/'. The problem was fdt_path_offset() takes a full path while creating a node with fdt_add_subnode() takes just the basename. Since this we only add root child nodes, we can just skip over the '/'. Fixes: 7536c7e03e74 ("of/fdt: Remove redundant kbasename function call") Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Qi Zheng <arch0.zheng@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210126023905.1631161-1-robh@kernel.org
2021-01-26team: protect features update by RCU to avoid deadlockIvan Vecera
Function __team_compute_features() is protected by team->lock mutex when it is called from team_compute_features() used when features of an underlying device is changed. This causes a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device is fired due to change propagated from team driver (e.g. MTU change). It's because callbacks like team_change_mtu() or team_vlan_rx_{add,del}_vid() protect their port list traversal by team->lock mutex. Example (r8169 case where this driver disables TSO for certain MTU values): ... [ 6391.348202] __mutex_lock.isra.6+0x2d0/0x4a0 [ 6391.358602] team_device_event+0x9d/0x160 [team] [ 6391.363756] notifier_call_chain+0x47/0x70 [ 6391.368329] netdev_update_features+0x56/0x60 [ 6391.373207] rtl8169_change_mtu+0x14/0x50 [r8169] [ 6391.378457] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.387022] dev_set_mtu+0x52/0x90 [ 6391.390820] team_change_mtu+0x64/0xf0 [team] [ 6391.395683] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.399963] do_setlink+0x231/0xf50 ... In fact team_compute_features() called from team_device_event() does not need to be protected by team->lock mutex and rcu_read_lock() is sufficient there for port list traversal. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26MAINTAINERS: add David Ahern to IPv4/IPv6 maintainersJakub Kicinski
David has been the de-facto maintainer for much of the IP code for the last couple of years, let's make it official. Link: https://lore.kernel.org/r/20210122173220.3579491-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtablePaul Blakey
If a non nat tuple entry is inserted just to the regular tuples rhashtable (ct_tuples_ht) and not to natted tuples rhashtable (ct_nat_tuples_ht). Commit bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables") mixed up the return labels and names sot that on cleanup or failure we still try to remove for the natted tuples rhashtable. Fix that by correctly checking if a natted tuples insertion before removing it. While here make it more readable. Fixes: bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables") Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Revert parameters on errors when changing MTU and LRO state ↵Maxim Mikityanskiy
without reset Sometimes, channel params are changed without recreating the channels. It happens in two basic cases: when the channels are closed, and when the parameter being changed doesn't affect how channels are configured. Such changes invoke a hardware command that might fail. The whole operation should be reverted in such cases, but the code that restores the parameters' values in the driver was missing. This commit adds this handling. Fixes: 2e20a151205b ("net/mlx5e: Fail safe mtu and lro setting") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Revert parameters on errors when changing trust state without resetMaxim Mikityanskiy
Trust state may be changed without recreating the channels. It happens when the channels are closed, and when channel parameters (min inline mode) stay the same after changing the trust state. Changing the trust state is a hardware command that may fail. The current code didn't restore the channel parameters to their old values if an error happened and the channels were closed. This commit adds handling for this case. Fixes: 6e0504c69811 ("net/mlx5e: Change inline mode correctly when changing trust state") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Correctly handle changing the number of queues when the interface ↵Maxim Mikityanskiy
is down This commit addresses two issues related to changing the number of queues when the channels are closed: 1. Missing call to mlx5e_num_channels_changed to update real_num_tx_queues when the number of TCs is changed. 2. When mlx5e_num_channels_changed returns an error, the channel parameters must be reverted. Two Fixes: tags correspond to the first commits where these two issues were introduced. Fixes: 3909a12e7913 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases") Fixes: fa3748775b92 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Fix CT rule + encap slow path offload and deletionPaul Blakey
Currently, if a neighbour isn't valid when offloading tunnel encap rules, we offload the original match and replace the original action with "goto slow path" action. For this we use a temporary flow attribute based on the original flow attribute and then change the action. Flow flags, which among those is the CT flag, are still shared for the slow path rule offload, so we end up parsing this flow as a CT + goto slow path rule. Besides being unnecessary, CT action offload saves extra information in the passed flow attribute, such as created ct_flow and mod_hdr, which is lost onces the temporary flow attribute is freed. When a neigh is updated and is valid, we offload the original CT rule with original CT action, which again creates a ct_flow and mod_hdr and saves it in the flow's original attribute. Then we delete the slow path rule with a temporary flow attribute based on original updated flow attribute, and we free the relevant ct_flow and mod_hdr. Then when tc deletes this flow, we try to free the ct_flow and mod_hdr on the flow's attribute again. To fix the issue, skip all furture proccesing (CT/Sample/Split rules) in offload/unoffload of slow path rules. Call trace: [ 758.850525] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000218 [ 758.952987] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 758.964170] Modules linked in: act_csum(E) act_pedit(E) act_tunnel_key(E) act_ct(E) nf_flow_table(E) xt_nat(E) ip6table_filter(E) ip6table_nat(E) xt_comment(E) ip6_tables(E) xt_conntrack(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) iptable_filter(E) iptable_nat(E) bpfilter(E) br_netfilter(E) bridge(E) stp(E) llc(E) xfrm_user(E) overlay(E) act_mirred(E) act_skbedit(E) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) esp6_offload(E) esp6(E) esp4_offload(E) esp4(E) xfrm_algo(E) mlx5_ib(OE) ib_uverbs(OE) geneve(E) ip6_udp_tunnel(E) udp_tunnel(E) nfnetlink_cttimeout(E) nfnetlink(E) mlx5_core(OE) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_conncount(E) nf_nat(E) mlxfw(OE) psample(E) nf_conntrack(E) nf_defrag_ipv4(E) vfio_mdev(E) mdev(E) ib_core(OE) mlx_compat(OE) crct10dif_ce(E) uio_pdrv_genirq(E) uio(E) i2c_mlx(E) mlxbf_pmc(E) sbsa_gwdt(E) mlxbf_gige(E) gpio_mlxbf2(E) mlxbf_pka(E) mlx_trio(E) mlx_bootctl(E) bluefield_edac(E) knem(O) [ 758.964225] ip_tables(E) mlxbf_tmfifo(E) ipv6(E) crc_ccitt(E) nf_defrag_ipv6(E) [ 759.154186] CPU: 5 PID: 122 Comm: kworker/u16:1 Tainted: G OE 5.4.60-mlnx.52.gde81e85 #1 [ 759.172870] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.5.0-2-gc1b5d64 Jan 4 2021 [ 759.195466] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [ 759.207344] pstate: a0000005 (NzCv daif -PAN -UAO) [ 759.217003] pc : mlx5_del_flow_rules+0x5c/0x160 [mlx5_core] [ 759.228229] lr : mlx5_del_flow_rules+0x34/0x160 [mlx5_core] [ 759.405858] Call trace: [ 759.410804] mlx5_del_flow_rules+0x5c/0x160 [mlx5_core] [ 759.421337] __mlx5_eswitch_del_rule.isra.43+0x5c/0x1c8 [mlx5_core] [ 759.433963] mlx5_eswitch_del_offloaded_rule_ct+0x34/0x40 [mlx5_core] [ 759.446942] mlx5_tc_rule_delete_ct+0x68/0x74 [mlx5_core] [ 759.457821] mlx5_tc_ct_delete_flow+0x160/0x21c [mlx5_core] [ 759.469051] mlx5e_tc_unoffload_fdb_rules+0x158/0x168 [mlx5_core] [ 759.481325] mlx5e_tc_encap_flows_del+0x140/0x26c [mlx5_core] [ 759.492901] mlx5e_rep_update_flows+0x11c/0x1ec [mlx5_core] [ 759.504127] mlx5e_rep_neigh_update+0x160/0x200 [mlx5_core] [ 759.515314] process_one_work+0x178/0x400 [ 759.523350] worker_thread+0x58/0x3e8 [ 759.530685] kthread+0x100/0x12c [ 759.537152] ret_from_fork+0x10/0x18 [ 759.544320] Code: 97ffef55 51000673 3100067f 54ffff41 (b9421ab3) [ 759.556548] ---[ end trace fab818bb1085832d ]--- Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabledMaor Dickman
The cited commit introduce new CONFIG_MLX5_CLS_ACT kconfig variable to control compilation of TC hardware offloads implementation. When this configuration is disabled the driver is still wrongly reports in ethtool that hw-tc-offload is supported. Fixed by reporting hw-tc-offload is supported only when CONFIG_MLX5_CLS_ACT is enabled. Fixes: d956873f908c ("net/mlx5e: Introduce kconfig var for TC support") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5: Maintain separate page trees for ECPF and PF functionsDaniel Jurgens
Pages for the host PF and ECPF were stored in the same tree, so the ECPF pages were being freed along with the host PF's when the host driver unloaded. Combine the function ID and ECPF flag to use as an index into the x-array containing the trees to get a different tree for the host PF and ECPF. Fixes: c6168161f693 ("net/mlx5: Add support for release all pages event") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Fix IPSEC statsMaxim Mikityanskiy
When IPSEC offload isn't active, the number of stats is not zero, but the strings are not filled, leading to exposing stats with empty names. Fix this by using the same condition for NUM_STATS and FILL_STRS. Fixes: 0aab3e1b04ae ("net/mlx5e: IPSec, Expose IPsec HW stat only for supporting HW") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: Reduce tc unsupported key print levelMaor Dickman
"Unsupported key used:" appears in kernel log when flows with unsupported key are used, arp fields for example. OpenVSwitch was changed to match on arp fields by default that caused this warning to appear in kernel log for every arp rule, which can be a lot. Fix by lowering print level from warning to debug. Fixes: e3a2b7ed018e ("net/mlx5e: Support offload cls_flower with drop action") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: free page before returnPan Bian
Instead of directly return, goto the error handling label to free allocated page. Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5e: E-switch, Fix rate calculation for overflowParav Pandit
rate_bytes_ps is a 64-bit field. It passed as 32-bit field to apply_police_params(). Due to this when police rate is higher than 4Gbps, 32-bit calculation ignores the carry. This results in incorrect rate configurationn the device. Fix it by performing 64-bit calculation. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26net/mlx5: Fix memory leak on flow table creation error flowRoi Dayan
When we create the ft object we also init rhltable in ft->fgs_hash. So in error flow before kfree of ft we need to destroy that rhltable. Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-26Merge tag 'mac80211-for-net-2021-01-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of fixes: * fix 160 MHz channel switch in mac80211 * fix a staging driver to not deadlock due to some recent cfg80211 changes * fix NULL-ptr deref if cfg80211 returns -EINPROGRESS to wext (syzbot) * pause TX in mac80211 in type change to prevent crashes (syzbot) * tag 'mac80211-for-net-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: staging: rtl8723bs: fix wireless regulatory API misuse mac80211: pause TX while changing interface type wext: fix NULL-ptr-dereference with cfg80211's lack of commit() mac80211: 160MHz with extended NSS BW in CSA ==================== Link: https://lore.kernel.org/r/20210126130529.75225-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26Merge tag 'wireless-drivers-2021-01-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.11 Second set of fixes for v5.11. Like in last time we again have more fixes than usual Actually a bit too much for my liking in this state of the cycle, but due to unrelated challenges I was only able to submit them now. We have few important crash fixes, iwlwifi modifying read-only data being the most reported issue, and also smaller fixes to iwlwifi. mt76 * fix a clang warning about enum usage * fix rx buffer refcounting crash mt7601u * fix rx buffer refcounting crash * fix crash when unbplugging the device iwlwifi * fix a crash where we were modifying read-only firmware data * lots of smaller fixes all over the driver * tag 'wireless-drivers-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: (24 commits) mt7601u: fix kernel crash unplugging the device iwlwifi: queue: bail out on invalid freeing iwlwifi: mvm: guard against device removal in reprobe iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit. iwlwifi: mvm: clear IN_D3 after wowlan status cmd iwlwifi: pcie: add rules to match Qu with Hr2 iwlwifi: mvm: invalidate IDs of internal stations at mvm start iwlwifi: mvm: fix the return type for DSM functions 1 and 2 iwlwifi: pcie: reschedule in long-running memory reads iwlwifi: pcie: use jiffies for memory read spin time limit iwlwifi: pcie: fix context info memory leak iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap iwlwifi: pcie: set LTR on more devices iwlwifi: queue: don't crash if txq->entries is NULL iwlwifi: fix the NMI flow for old devices iwlwifi: pnvm: don't try to load after failures iwlwifi: pnvm: don't skip everything when not reloading iwlwifi: pcie: avoid potential PNVM leaks iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time() iwlwifi: mvm: skip power command when unbinding vif during CSA ... ==================== Link: https://lore.kernel.org/r/20210126092202.6A367C433CA@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26iwlwifi: provide gso_type to GSO packetsEric Dumazet
net/core/tso.c got recent support for USO, and this broke iwlfifi because the driver implemented a limited form of GSO. Providing ->gso_type allows for skb_is_gso_tcp() to provide a correct result. Fixes: 3d5b459ba0e3 ("net: tso: add UDP segmentation support") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209913 Link: https://lore.kernel.org/r/20210125150949.619309-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26igc: fix link speed advertisingCorinna Vinschen
Link speed advertising in igc has two problems: - When setting the advertisement via ethtool, the link speed is converted to the legacy 32 bit representation for the intel PHY code. This inadvertently drops ETHTOOL_LINK_MODE_2500baseT_Full_BIT (being beyond bit 31). As a result, any call to `ethtool -s ...' drops the 2500Mbit/s link speed from the PHY settings. Only reloading the driver alleviates that problem. Fix this by converting the ETHTOOL_LINK_MODE_2500baseT_Full_BIT to the Intel PHY ADVERTISE_2500_FULL bit explicitly. - Rather than checking the actual PHY setting, the .get_link_ksettings function always fills link_modes.advertising with all link speeds the device is capable of. Fix this by checking the PHY autoneg_advertised settings and report only the actually advertised speeds up to ethtool. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-26mailmap: remove the "repo-abbrev" commentÆvar Arnfjörð Bjarmason
Remove the magical "repo-abbrev" comment added when this file was introduced in e0ab1ec9fcd3 ([PATCH] add .mailmap for proper git-shortlog output, 2007-02-14). It's been an undocumented feature of git-shortlog(1), originally added to git for Linus's use. Since then he's no longer using it[1], and I've removed the feature in git.git's 4e168333a87 (shortlog: remove unused(?) "repo-abbrev" feature, 2021-01-12). It's on the "master" branch, but not yet in a release version. Let's also remove it from linux.git, both as a heads-up to any potential users of it in linux.git whose use would be broken sooner than later by git itself, and because it'll eventually be entirely redundant. 1. https://lore.kernel.org/git/CAHk-=wixHyBKZVUcxq+NCWMbkrX0xnppb7UCopRWw1+oExYpYw@mail.gmail.com/ Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-26parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULESHelge Deller
When building a kernel without module support, the CONFIG_MLONGCALL option needs to be enabled in order to reach symbols which are outside of a 22-bit branch. This patch changes the autodetection in the Kconfig script to always enable CONFIG_MLONGCALL when modules are disabled and uses a far call to preempt_schedule_irq() in intr_do_preempt() to reach the symbol in all cases. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org # v5.6+
2021-01-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - x86 bugfixes - Documentation fixes - Avoid performance regression due to SEV-ES patches - ARM: - Don't allow tagged pointers to point to memslots - Filter out ARMv8.1+ PMU events on v8.0 hardware - Hide PMU registers from userspace when no PMU is configured - More PMU cleanups - Don't try to handle broken PSCI firmware - More sys_reg() to reg_to_encoding() conversions * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: allow KVM_REQ_GET_NESTED_STATE_PAGES outside guest mode for VMX KVM: x86: Revert "KVM: x86: Mark GPRs dirty when written" KVM: SVM: Unconditionally sync GPRs to GHCB on VMRUN of SEV-ES guest KVM: nVMX: Sync unsync'd vmcs02 state to vmcs12 on migration kvm: tracing: Fix unmatched kvm_entry and kvm_exit events KVM: Documentation: Update description of KVM_{GET,CLEAR}_DIRTY_LOG KVM: x86: get smi pending status correctly KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[] KVM: x86/pmu: Fix UBSAN shift-out-of-bounds warning in intel_pmu_refresh() KVM: x86: Add more protection against undefined behavior in rsvd_bits() KVM: Documentation: Fix spec for KVM_CAP_ENABLE_CAP_VM KVM: Forbid the use of tagged userspace addresses for memslots KVM: arm64: Filter out v8.1+ events on v8.0 HW KVM: arm64: Compute TPIDR_EL2 ignoring MTE tag KVM: arm64: Use the reg_to_encoding() macro instead of sys_reg() KVM: arm64: Allow PSCI SYSTEM_OFF/RESET to return KVM: arm64: Simplify handling of absent PMU system registers KVM: arm64: Hide PMU registers from userspace when not available
2021-01-26Merge tag 'spi-fix-v5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "One new device ID here, plus an error handling fix - nothing remarkable in either" * tag 'spi-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spidev: Add cisco device compatible spi: altera: Fix memory leak on error path
2021-01-26Merge tag 'regulator-fix-v5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "The main thing here is a change to make sure that we don't try to double resolve the supply of a regulator if we have two probes going on simultaneously, plus an incremental fix on top of that to resolve a lockdep issue it introduced. There's also a patch from Dmitry Osipenko adding stubs for some functions to avoid build issues in consumers in some configurations" * tag 'regulator-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix lockdep warning resolving supplies regulator: consumer: Add missing stubs to regulator/consumer.h regulator: core: avoid regulator_resolve_supply() race condition
2021-01-26parisc: Remove leftover reference to the power_taskletDavidlohr Bueso
This was removed long ago, back in: 6e16d9409e1 ([PARISC] Convert soft power switch driver to kthread) Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Helge Deller <deller@gmx.de>
2021-01-26i40e: acquire VSI pointer only after VF is initializedStefan Assmann
This change simplifies the VF initialization check and also minimizes the delay between acquiring the VSI pointer and using it. As known by the commit being fixed, there is a risk of the VSI pointer getting changed. Therefore minimize the delay between getting and using the pointer. Fixes: 9889707b06ac ("i40e: Fix crash caused by stress setting of VF MAC addresses") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-26ice: Fix MSI-X vector fallback logicBrett Creeley
The current MSI-X enablement logic tries to enable best-case MSI-X vectors and if that fails we only support a bare-minimum set. This includes a single MSI-X for 1 Tx and 1 Rx queue and a single MSI-X for the OICR interrupt. Unfortunately, the driver fails to load when we don't get as many MSI-X as requested for a couple reasons. First, the code to allocate MSI-X in the driver tries to allocate num_online_cpus() MSI-X for LAN traffic without caring about the number of MSI-X actually enabled/requested from the kernel for LAN traffic. So, when calling ice_get_res() for the PF VSI, it returns failure because the number of available vectors is less than requested. Fix this by not allowing the PF VSI to allocation more than pf->num_lan_msix MSI-X vectors and pf->num_lan_msix Rx/Tx queues. Limiting the number of queues is done because we don't want more than 1 Tx/Rx queue per interrupt due to performance conerns. Second, the driver assigns pf->num_lan_msix = 2, to account for LAN traffic and the OICR. However, pf->num_lan_msix is only meant for LAN MSI-X. This is causing a failure when the PF VSI tries to allocate/reserve the minimum pf->num_lan_msix because the OICR MSI-X has already been reserved, so there may not be enough MSI-X vectors left. Fix this by setting pf->num_lan_msix = 1 for the failure case. Then the ICE_MIN_MSIX accounts for the LAN MSI-X and the OICR MSI-X needed for the failure case. Update the related defines used in ice_ena_msix_range() to align with the above behavior and remove the unused RDMA defines because RDMA is currently not supported. Also, remove the now incorrect comment. Fixes: 152b978a1f90 ("ice: Rework ice_ena_msix_range") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-26ice: Don't allow more channels than LAN MSI-X availableBrett Creeley
Currently users could create more channels than LAN MSI-X available. This is happening because there is no check against pf->num_lan_msix when checking the max allowed channels and will cause performance issues if multiple Tx and Rx queues are tied to a single MSI-X. Fix this by not allowing more channels than LAN MSI-X available in pf->num_lan_msix. Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-26ice: update dev_addr in ice_set_mac_address even if HW filter existsNick Nunley
Fix the driver to copy the MAC address configured in ndo_set_mac_address into dev_addr, even if the MAC filter already exists in HW. In some situations (e.g. bonding) the netdev's dev_addr could have been modified outside of the driver, with no change to the HW filter, so the driver cannot assume that they match. Fixes: 757976ab16be ("ice: Fix check for removing/adding mac filters") Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-26ice: Implement flow for IPv6 next header (extension header)Nick Nunley
This patch is based on a similar change to i40e by Slawomir Laba: "i40e: Implement flow for IPv6 next header (extension header)". When a packet contains an IPv6 header with next header which is an extension header and not a protocol one, the kernel function skb_transport_header called with such sk_buff will return a pointer to the extension header and not to the TCP one. The above explained call caused a problem with packet processing for skb with encapsulation for tunnel with ICE_TX_CTX_EIPT_IPV6. The extension header was not skipped at all. The ipv6_skip_exthdr function does check if next header of the IPV6 header is an extension header and doesn't modify the l4_proto pointer if it points to a protocol header value so its safe to omit the comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can return value -1. This means that the skipping process failed and there is something wrong with the packet so it will be dropped. Fixes: a4e82a81f573 ("ice: Add support for tunnel offloads") Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-26ice: fix FDir IPv6 flexbyteHenry Tieman
The packet classifier would occasionally misrecognize an IPv6 training packet when the next protocol field was 0. The correct value for unspecified protocol is IPPROTO_NONE. Fixes: 165d80d6adab ("ice: Support IPv6 Flow Director filters") Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-26Revert "mm: fix initialization of struct page for holes in memory layout"Linus Torvalds
This reverts commit d3921cb8be29ce5668c64e23ffdaeec5f8c69399. Chris Wilson reports that it causes boot problems: "We have half a dozen or so different machines in CI that are silently failing to boot, that we believe is bisected to this patch" and the CI team confirmed that a revert fixed the issues. The cause is unknown for now, so let's revert it. Link: https://lore.kernel.org/lkml/161160687463.28991.354987542182281928@build.alporthouse.com/ Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-26media: hantro: Fix reset_raw_fmt initializationRicardo Ribalda
raw_fmt->height in never initialized. But width in initialized twice. Fixes: 88d06362d1d05 ("media: hantro: Refactor for V4L2 API spec compliancy") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 20:39:11 +0000