| Age | Commit message (Collapse) | Author |
|---|
|
Verify data size before trying to parse it to avoid reading out of
buffer. This could happen in case of problems at MTD level or invalid DT
bindings.
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Cc: stable <stable@kernel.org>
Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables")
[rmilecki: simplify commit description & rebase]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240902142510.71096-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
smatch warning:
drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf'
In fastrpc_req_mmap() error path, the fastrpc buffer is freed in
fastrpc_req_munmap_impl() if unmap is successful.
But in the end, there is an unconditional call to fastrpc_buf_free().
So the above case triggers the double free of fastrpc buf.
Fixes: 72fa6f7820c4 ("misc: fastrpc: Rework fastrpc_req_munmap")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240902141409.70371-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Binder objects are processed and copied individually into the target
buffer during transactions. Any raw data in-between these objects is
copied as well. However, this raw data copy lacks an out-of-bounds
check. If the raw data exceeds the data section size then the copy
overwrites the offsets section. This eventually triggers an error that
attempts to unwind the processed objects. However, at this point the
offsets used to index these objects are now corrupted.
Unwinding with corrupted offsets can result in decrements of arbitrary
nodes and lead to their premature release. Other users of such nodes are
left with a dangling pointer triggering a use-after-free. This issue is
made evident by the following KASAN report (trimmed):
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c
Write of size 4 at addr ffff47fc91598f04 by task binder-util/743
CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x19c
binder_free_buf+0x128/0x434
binder_thread_write+0x8a4/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Allocated by task 743:
__kmalloc_cache_noprof+0x110/0x270
binder_new_node+0x50/0x700
binder_transaction+0x413c/0x6da8
binder_thread_write+0x978/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Freed by task 745:
kfree+0xbc/0x208
binder_thread_read+0x1c5c/0x37d4
binder_ioctl+0x16d8/0x258c
[...]
==================================================================
To avoid this issue, let's check that the raw data copy is within the
boundaries of the data section.
Fixes: 6d98eb95b450 ("binder: avoid potential data leakage when copying txn")
Cc: Todd Kjos <tkjos@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240822182353.2129600-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for 6.11
The usual mixed bag of new issues and ancient ones.
The fact so many are ADI is probably due to an uptick in upstreaming
effort from Analog + Baylibre meaning existing code is getting more eyes
on it. Hence it's a good sign not a reflection of inherent high bug
incidence!
Core and helper related
-----------------------
in kernel interfaces
- Fix missing application of scale to the integer part of
IIO_INT_PLUS_XXX value pairs when using the
iio_convert_raw_to_processed*() helper.
buffer-dmaengine
- Make sure to release DMA channel in error path.
Driver related
--------------
adi,ad-sigma-delta library
- Check irq-flags for the correct irq if multiple are provided.
adi,ad7124
- Wait after reset before reading the chip ID register.
- Compare only the relevant field when looking for an existing
config to reuse for a new channel.
- Fix an off by one in which channel config is being filled from
firmware.
adi,ad7173
- Fix missing vendor prefix in compatible strings.
- Fix wrong info for GPIO related bit positions for ad4114,ad4115 and ad4116.
adi,ad7606
- Drop incorrect check on frstdata when in serial mode, it only applies to
parallel mode.
adi,ad9834
- Check userspace input for frequency parameter to avoid div by zero.
invensense,mpu6050
- Avoid reading interrupt status on some older chips as it seems there
is a hardware problem that surfaces as a result of adding wake on
motion support to the driver (which these chips don't support).
ti,ads1119
- Fix incorrect IRQ flag (new driver so no firmware compatibility regression
issues with fixing this now).
* tag 'iio-fixes-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
staging: iio: frequency: ad9834: Validate frequency parameter value
|
|
Since commit 178c0a33c421 ("drm/print: Add generic drm dev printk
function") the output from drm_WARN() includes previously missing
the [drm] tag, so now xe_assert() is printing it twice:
[ ] xe 0000:00:02.0: [drm] [drm] Assertion `false` failed!
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902190726.1748-1-michal.wajdeczko@intel.com
|
|
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Fix XDP implementation
The XDP implementation on am65-cpsw driver is broken in many ways
and this series fixes it.
Below are the current issues that are being fixed:
1) The following XDP_DROP test from [1] stalls the interface after
250 packets.
~# xdb-bench drop -m native eth0
This is because new RX requests are never queued. Fix that.
2) The below XDP_TX test from [1] fails with a warning
[ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom
~# xdb-bench tx -m native eth0
Fix that by using PAGE_SIZE during xdp_init_buf().
3) In XDP_REDIRECT case only 1 packet was processed in rx_poll.
Fix it to process up to budget packets.
~# ./xdp-bench redirect -m native eth0 eth0
4) If number of TX queues are set to 1 we get a NULL pointer
dereference during XDP_TX.
~# ethtool -L eth0 tx 1
~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2
Transmitting on eth0 (ifindex 2)
[ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
5) Net statistics is broken for XDP_TX and XDP_REDIRECT
[1] xdp-tools suite https://github.com/xdp-project/xdp-tools
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
---
====================
Link: https://patch.msgid.link/20240829-am65-cpsw-xdp-v1-0-ff3c81054a5e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We are not using ndev->stats for rx_packets and rx_bytes anymore.
Instead, we use per CPU stats which are collated in
am65_cpsw_nuss_ndo_get_stats().
Fix RX statistics for XDP_TX and XDP_REDIRECT cases.
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If number of TX queues are set to 1 we get a NULL pointer
dereference during XDP_TX.
~# ethtool -L eth0 tx 1
~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2
Transmitting on eth0 (ifindex 2)
[ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
Fix this by using actual TX queues instead of max TX queues
when picking the TX channel in am65_cpsw_ndo_xdp_xmit().
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The following XDP_DROP test from [1] stalls the interface after
250 packets.
~# xdb-bench drop -m native eth0
This is because new RX requests are never queued. Fix that.
The below XDP_TX test from [1] fails with a warning
[ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom
~# xdb-bench tx -m native eth0
Fix that by using PAGE_SIZE during xdp_init_buf().
In XDP_REDIRECT case only 1 packet was processed in rx_poll.
Fix it to process up to budget packets.
Fix all XDP error cases to call trace_xdp_exception() and drop the packet
in am65_cpsw_run_xdp().
[1] xdp-tools suite https://github.com/xdp-project/xdp-tools
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On HDMI connectors which use drm_bridge_connector and DRM_BRIDGE_OP_HDMI
IGT chokes on the max_bpc property in several kms_properties tests due
to the drm_bridge_connector failing to reset HDMI-related
properties.
Call __drm_atomic_helper_connector_hdmi_reset() if the
drm_bridge_connector has bridge_hdmi.
It is impossible to call this function from HDMI bridges, none of the
bridge callbacks correspond to the drm_connector_funcs::reset().
Fixes: 6b4468b0c6ba ("drm/bridge-connector: implement glue code for HDMI connector")
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-3-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Kconfig symbols should not declare dependency on DRM_DISPLAY_HELPER.
Move all parts of DRM_DISPLAY_HELPER to an if DRM_DISPLAY_HELPER block.
It is not possible to make those symbols select DRM_DISPLAY_HELPER
because of the link issues when a part of the helper is selected to be
built-in, while other part is selected to be as module. In such a case
the modular part doesn't get built at all, leading to undefined symbols.
The only viable alternative is to split drm_display_helper.ko into
several small modules, each of them having their own dependencies.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-1-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The Partner PD Revision field in GET_CONNECTOR_CAPABILITY
data structure was introduced in UCSI v2.1. In
ucsi_check_connector_capability() the version was assumed to
be 2.0, and in ucsi_register_partner() the field is accessed
completely unconditionally.
Fixing the version in ucsi_check_connector_capability(), and
replacing the unconditional pd_revision assignment with a
direct call to ucsi_check_connector_capability() in
ucsi_register_port(). After this the revision is also
checked only if there is a PD contract.
Fixes: b9fccfdb4ebb ("usb: typec: ucsi: Get PD revision for partner")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240830111645.2134301-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch fixes the procedure of resetting controller.
The CPUCTRL register is write only and reading returns 0.
Waiting for reset to complite is incorrect.
Fixes: 3eb1f1efe204 ("usb: cdns2: Add main part of Cadence USBHS driver")
cc: stable@vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/PH7PR07MB9538D56D75F1F399D0BB96F0DD922@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fix addresses STAR 9001285599, which only affects DWC_usb3 version
3.20a. The timer value for PM_LC_TIMER in DWC_usb3 3.20a for the Link
ECN changes is incorrect. If the PM TIMER ECN is enabled via GUCTL2[19],
the link compliance test (TD7.21) may fail. If the ECN is not enabled
(GUCTL2[19] = 0), the controller will use the old timer value (5us),
which is still acceptable for the link compliance test. Therefore, clear
GUCTL2[19] to pass the USB link compliance test: TD 7.21.
Cc: stable@vger.kernel.org
Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240829094502.26502-1-quic_faisalh@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When operating in High-Speed, it is observed that DSTS[USBLNKST] doesn't
update link state immediately after receiving the wakeup interrupt. Since
wakeup event handler calls the resume callbacks, there is a chance that
function drivers can perform an ep queue, which in turn tries to perform
remote wakeup from send_gadget_ep_cmd(STARTXFER). This happens because
DSTS[[21:18] wasn't updated to U0 yet, it's observed that the latency of
DSTS can be in order of milli-seconds. Hence avoid calling gadget_wakeup
during startxfer to prevent unnecessarily issuing remote wakeup to host.
Fixes: c36d8e947a56 ("usb: dwc3: gadget: put link to U0 before Start Transfer")
Cc: stable@vger.kernel.org
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240828064302.3796315-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In commit "drm/i915/display: Increase number of fast wake precharge pulses"
we were increasing Fast Wake sync pulse length to fix problems observed on
Dell Precision 5490 laptop with AUO panel. Later we have observed this is
causing problems on other panels.
Fix these problems by increasing Fast Wake sync pulse length as a quirk
applied for Dell Precision 5490 with problematic panel.
Fixes: f77772866385 ("drm/i915/display: Increase number of fast wake precharge pulses")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: http://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9739
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2246
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11762
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-3-jouni.hogander@intel.com
(cherry picked from commit fcba2ed66b39252210f4e739722ebcc5398c2197)
Requires: 43cf50eb1408 ("drm/i915/display: Add mechanism to use sink model when applying quirk")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Currently there is no way to apply quirk on device only if certain panel
model is installed. This patch implements such mechanism by adding new
quirk type intel_dpcd_quirk which contains also sink_oui and sink_device_id
fields and using also them to figure out if applying quirk is needed.
New intel_init_dpcd_quirks is added and called after drm_dp_read_desc with
proper sink device identity read from dpcdc.
v3:
- !mem_is_zero fixed to mem_is_zero
v2:
- instead of using struct intel_quirk add new struct intel_dpcd_quirk
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-2-jouni.hogander@intel.com
(cherry picked from commit b3b91369908ac63be6f64905448b8ba5cd151875)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
In commit "drm/i915/display: Increase number of fast wake precharge pulses"
we were increasing Fast Wake sync pulse length to fix problems observed on
Dell Precision 5490 laptop with AUO panel. Later we have observed this is
causing problems on other panels.
Fix these problems by increasing Fast Wake sync pulse length as a quirk
applied for Dell Precision 5490 with problematic panel.
Fixes: f77772866385 ("drm/i915/display: Increase number of fast wake precharge pulses")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: http://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9739
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2246
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11762
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-3-jouni.hogander@intel.com
|
|
Currently there is no way to apply quirk on device only if certain panel
model is installed. This patch implements such mechanism by adding new
quirk type intel_dpcd_quirk which contains also sink_oui and sink_device_id
fields and using also them to figure out if applying quirk is needed.
New intel_init_dpcd_quirks is added and called after drm_dp_read_desc with
proper sink device identity read from dpcdc.
v3:
- !mem_is_zero fixed to mem_is_zero
v2:
- instead of using struct intel_quirk add new struct intel_dpcd_quirk
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-2-jouni.hogander@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- qca: If memdump doesn't work, re-enable IBS
- MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
- MGMT: Ignore keys being loaded with invalid type
* tag 'for-net-2024-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Ignore keys being loaded with invalid type
Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once
Bluetooth: qca: If memdump doesn't work, re-enable IBS
====================
Link: https://patch.msgid.link/20240830220300.1316772-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-08-30
The first patch is by Kuniyuki Iwashima for the CAN BCM protocol that
adds a missing proc entry removal when a device unregistered.
Simon Horman fixes the cleanup in the error cleanup path of the m_can
driver's open function.
Markus Schneider-Pargmann contributes 7 fixes for the m_can driver,
all related to the recently added IRQ coalescing support.
The next 2 patches are by me, target the mcp251xfd driver and fix ring
and coalescing configuration problems when switching from CAN-CC to
CAN-FD mode.
Simon Arlott's patch fixes a possible deadlock in the mcp251x driver.
The last patch is by Martin Jocic for the kvaser_pciefd driver and
fixes a problem with lost IRQs, which result in starvation, under high
load situations.
* tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_pciefd: Use a single write when releasing RX buffers
can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open
can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration
can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode
can: m_can: Limit coalescing to peripheral instances
can: m_can: Reset cached active_interrupts on start
can: m_can: disable_all_interrupts, not clear active_interrupts
can: m_can: Do not cancel timer from within timer
can: m_can: Remove m_can_rx_peripheral indirection
can: m_can: Remove coalesing disable in isr during suspend
can: m_can: Reset coalescing during suspend/resume
can: m_can: Release irq on error in m_can_open
can: bcm: Remove proc entry when dev is unregistered.
====================
Link: https://patch.msgid.link/20240830215914.1610393-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Call cifs_reconnect() to wake up processes waiting on negotiate
protocol to handle the case where server abruptly shut down and had no
chance to properly close the socket.
Simple reproducer:
ssh 192.168.2.100 pkill -STOP smbd
mount.cifs //192.168.2.100/test /mnt -o ... [never returns]
Cc: Rickard Andersson <rickaran@axis.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Btrfs rejects to mount a FS if it finds a block group with a broken write
pointer (e.g, unequal write pointers on two zones of RAID1 block group).
Since such case can happen easily with a power-loss or crash of a system,
we need to handle the case more gently.
Handle such block group by making it unallocatable, so that there will be
no writes into it. That can be done by setting the allocation pointer at
the end of allocating region (= block_group->zone_capacity). Then, existing
code handle zone_unusable properly.
Having proper zone_capacity is necessary for the change. So, set it as fast
as possible.
We cannot handle RAID0 and RAID10 case like this. But, they are anyway
unable to read because of a missing stripe.
Fixes: 265f7237dd25 ("btrfs: zoned: allow DUP on meta-data block groups")
Fixes: 568220fa9657 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree")
CC: stable@vger.kernel.org # 6.1+
Reported-by: HAN Yuwei <hrx@bupt.moe>
Cc: Xuefer <xuefer@gmail.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
FYI: I'm carrying this on perf-tools-next.
The previous attempt fixed the build on debian:experimental-x-mipsel,
but when building on a larger set of containers I noticed it broke the
build on some other 32-bit architectures such as:
42 7.87 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)
builtin-daemon.c: In function 'cmd_session_list':
builtin-daemon.c:692:16: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Werror=format=]
fprintf(out, "%c%" PRIu64,
^~~~~
builtin-daemon.c:694:13:
csv_sep, (curr - daemon->start) / 60);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from builtin-daemon.c:3:0:
/usr/arm-linux-gnueabihf/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
So lets cast that time_t (32-bit/64-bit) to uint64_t to make sure it
builds everywhere.
Fixes: 4bbe6002931954bb ("perf daemon: Fix the build on 32-bit architectures")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/ZsPmldtJ0D9Cua9_@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The 32-bit arm build system will complain:
tools/perf/util/python.c:75:28: error: field ‘sample’ has incomplete type
75 | struct perf_sample sample;
However, arm64 build system doesn't complain this.
The root cause is arm64 define "HAVE_KVM_STAT_SUPPORT := 1" in
tools/perf/arch/arm64/Makefile, but arm arch doesn't define this.
This will lead to kvm-stat.h include other header files on arm64 build
system, especially "util/sample.h" for util/python.c.
This will try to directly include "util/sample.h" for "util/python.c" to
avoid such build issue on arm platform.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Cc: imx@lists.linux.dev
Link: https://lore.kernel.org/r/20240819023403.201324-1-xu.yang_2@nxp.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The spinlock and rwlock use a single-element per-cpu array to track
current locks due to performance reason. But this means the key is
always available and it cannot simply account lock stats in the array
because some of them are invalid.
In fact, the contention_end() program in the BPF invalidates the entry
by setting the 'lock' value to 0 instead of deleting the entry for the
hashmap. So it should skip entries with the lock value of 0 in the
account_end_timestamp().
Otherwise, it'd have spurious high contention on an idle machine:
$ sudo perf lock con -ab -Y spinlock sleep 3
contended total wait max wait avg wait type caller
8 4.72 s 1.84 s 590.46 ms spinlock rcu_core+0xc7
8 1.87 s 1.87 s 233.48 ms spinlock process_one_work+0x1b5
2 1.87 s 1.87 s 933.92 ms spinlock worker_thread+0x1a2
3 1.81 s 1.81 s 603.93 ms spinlock tmigr_update_events+0x13c
2 1.72 s 1.72 s 861.98 ms spinlock tick_do_update_jiffies64+0x25
6 42.48 us 13.02 us 7.08 us spinlock futex_q_lock+0x2a
1 13.03 us 13.03 us 13.03 us spinlock futex_wake+0xce
1 11.61 us 11.61 us 11.61 us spinlock rcu_core+0xc7
I don't believe it has contention on a spinlock longer than 1 second.
After this change, it only reports some small contentions.
$ sudo perf lock con -ab -Y spinlock sleep 3
contended total wait max wait avg wait type caller
4 133.51 us 43.29 us 33.38 us spinlock tick_do_update_jiffies64+0x25
4 69.06 us 31.82 us 17.27 us spinlock process_one_work+0x1b5
2 50.66 us 25.77 us 25.33 us spinlock rcu_core+0xc7
1 28.45 us 28.45 us 28.45 us spinlock rcu_core+0xc7
1 24.77 us 24.77 us 24.77 us spinlock tmigr_update_events+0x13c
1 23.34 us 23.34 us 23.34 us spinlock raw_spin_rq_lock_nested+0x15
Fixes: b5711042a1c8 ("perf lock contention: Use per-cpu array map for spinlocks")
Reported-by: Xi Wang <xii@google.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240828052953.1445862-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Commit 3e0bf9fde2984469 ("perf pmu: Restore full PMU name wildcard
support") adds a test case "PMU cmdline match" that covers PMU name
wildcard support provided by function perf_pmu__match(). The test works
with a wide range of supported combinations of PMU name matching but
omits the case that if the perf_pmu__match() cannot match the PMU name
to the wildcard, it tries to match its alias. However, this variable is
not set up, causing the test case to fail when run with subprocesses or
to segfault if run as a single process.
./perf test -vv 9
9: Sysfs PMU tests :
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : FAILED!
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
Segmentation fault (core dumped)
Initialize the PMU alias to null for all tests of perf_pmu__match()
as this functionality is not being tested and the alias matching works
exactly the same as the matching of the PMU name.
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : Ok
Fixes: 3e0bf9fde2984469 ("perf pmu: Restore full PMU name wildcard support")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: james.clark@arm.com
Cc: mpetlan@redhat.com
Cc: rstoyano@redhat.com
Link: https://lore.kernel.org/r/20240808103749.9356-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
As part of the VF config release, we should reset all parameters,
including thresholds, to always start with the clean VF config.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830132100.1704-3-michal.wajdeczko@intel.com
|
|
We are pushing threshold KLV to the GuC immediately during the
threshold provisioning, but those configs will be lost during a
GT reset. Include threshold KLVs while encoding full VF config
buffer to make sure the GuC receives all of the config KLVs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830132100.1704-2-michal.wajdeczko@intel.com
|
|
The local extent changeset is passed to clear_record_extent_bits() where
it may have some additional memory dynamically allocated for ulist. When
qgroup is disabled, the memory is leaked because in this case the
changeset is not released upon __btrfs_qgroup_release_data() return.
Since the recorded contents of the changeset are not used thereafter, just
don't pass it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Reported-by: syzbot+81670362c283f3dd889c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000aa8c0c060ade165e@google.com
Fixes: af0e2aab3b70 ("btrfs: qgroup: flush reservations during quota disable")
CC: stable@vger.kernel.org # 6.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
PMO assumes that like timings can be synchronized, but DC only allows
this if the signal types match.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29d3d6af43135de7bec677f334292ca8dab53d67)
Cc: stable@vger.kernel.org
|
|
Backlight updates require aux and/or register access. Therefore, driver
needs to disallow IPS beforehand.
So, acquire the dc lock before calling into dc to update backlight - we
should be doing this regardless of IPS. Then, while the lock is held,
disallow IPS before calling into dc, then allow IPS afterwards (if it
was previously allowed).
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 988fe2862635c1b1b40e41c85c24db44ab337c13)
Cc: stable@vger.kernel.org # 6.10+
|
|
This adds allocation latency, but aligns better with user
expectations. The latency should improve with the drm buddy
clearing patches that Arun has been working on.
In addition this fixes the high CPU spikes seen when doing
wipe on release.
v2: always set AMDGPU_GEM_CREATE_VRAM_CLEARED (Christian)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3528
Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality")
Acked-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
(cherry picked from commit 6c0a7c3c693ac84f8b50269a9088af8f37446863)
Cc: stable@vger.kernel.org # 6.10.x
|
|
For mes11 old firmware has issue to map legacy queue,
add a flag to switch mes to map legacy queue.
Fixes: f9d8c5c7855d ("drm/amdgpu/gfx: enable mes to map legacy queue support")
Reported-by: Andrew Worsley <amworsley@gmail.com>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-August/112773.html
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 52491d97aadcde543986d596ed55f70bf2142851)
|
|
[Why]
DCN IPS interoperates with other system idle power features, such as
Zstates.
On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a
hard hang. We observe this on systems where the SBIOS allows Z8.
Though there is a SBIOS fix, there's no guarantee that users will get it
any time soon, or even install it. A workaround is needed to prevent
this from rearing its head in the wild.
[How]
For DCN35, check the pmfw version to determine whether the SBIOS has the
fix. If not, set IPS1+RCG as the deepest possible state in all cases
except for s0ix and display off (DPMS). Otherwise, enable all IPS
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 28d43d0895896f84c038d906d244e0a95eb243ec)
Cc: stable@vger.kernel.org
|
|
This reverts commit 166a490f59ac10340ee5330e51c15188ce2a7f8f.
There are several reports that this commit breaks system suspend on some specific
Lenovo platforms. Since there is no fix available, for now revert this commit
to make suspend work again on those platforms.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219196
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2301921
Cc: <stable@vger.kernel.org> # 6.10.x: d3e154d7776b: Revert "wifi: ath11k: restore country code during resume"
Cc: <stable@vger.kernel.org> # 6.10.x
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240830073420.5790-3-quic_bqiang@quicinc.com
|
|
This reverts commit 7f0343b7b8710436c1e6355c71782d32ada47e0c.
We are going to revert commit 166a490f59ac ("wifi: ath11k: support hibernation"), on
which this commit depends. With that commit reverted, this one is not needed any
more, so revert this commit first.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240830073420.5790-2-quic_bqiang@quicinc.com
|
|
Protect the MMIO access with safe mode.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Protect the MMIO access with safe mode.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Protect the MMIO access with safe mode.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather than open coding it for the queue reset.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's not supported under SR-IOV at the moment.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's not supported under SR-IOV at the moment.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's not supported under SR-IOV at the moment.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement queue reset for graphic and compute queue.
v2: use amdgpu_gfx_rlc funcs to enter/exit safe mode.
v3: use gfx_v11_0_request_gfx_index_mutex()
v4: fix mutex handling
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The reset_queue api could be used from kfd or kgd.
v2: add use_mmio parameter for mes_reset_legacy_queue.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add me/pipe/queue parameters for queue reset input.
v2: fix build (Alex)
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
