| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fixes from Ingo Molnar:
"Two rseq bugfixes:
- CLONE_VM !CLONE_THREAD didn't work properly, the kernel would end
up corrupting the TLS of the parent. Technically a change in the
ABI but the previous behavior couldn't resonably have been relied
on by applications so this looks like a valid exception to the ABI
rule.
- Make the RSEQ_FLAG_UNREGISTER ABI behavior consistent with the
handling of other flags. This is not thought to impact any
applications either"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Unregister rseq for clone CLONE_VM
rseq: Reject unknown flags on rseq unregister
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"Here is an urgent fix for ptrace_may_access() permission checking.
Commit 69f594a38967 ("ptrace: do not audit capability check when
outputing /proc/pid/stat") introduced the ability to opt out of audit
messages for accesses to various proc files since they are not
violations of policy.
While doing so it switched the check from ns_capable() to
has_ns_capability{_noaudit}(). That means it switched from checking
the subjective credentials (ktask->cred) of the task to using the
objective credentials (ktask->real_cred). This is appears to be wrong.
ptrace_has_cap() is currently only used in ptrace_may_access() And is
used to check whether the calling task (subject) has the
CAP_SYS_PTRACE capability in the provided user namespace to operate on
the target task (object). According to the cred.h comments this means
the subjective credentials of the calling task need to be used.
With this fix we switch ptrace_has_cap() to use security_capable() and
thus back to using the subjective credentials.
As one example where this might be particularly problematic, Jann
pointed out that in combination with the upcoming IORING_OP_OPENAT{2}
feature, this bug might allow unprivileged users to bypass the
capability checks while asynchronously opening files like /proc/*/mem,
because the capability checks for this would be performed against
kernel credentials.
To illustrate on the former point about this being exploitable: When
io_uring creates a new context it records the subjective credentials
of the caller. Later on, when it starts to do work it creates a kernel
thread and registers a callback. The callback runs with kernel creds
for ktask->real_cred and ktask->cred.
To prevent this from becoming a full-blown 0-day io_uring will call
override_cred() and override ktask->cred with the subjective
credentials of the creator of the io_uring instance. With
ptrace_has_cap() currently looking at ktask->real_cred this override
will be ineffective and the caller will be able to open arbitray proc
files as mentioned above.
Luckily, this is currently not exploitable but would be so once
IORING_OP_OPENAT{2} land in v5.6. Let's fix it now.
To minimize potential regressions I successfully ran the criu
testsuite. criu makes heavy use of ptrace() and extensively hits
ptrace_may_access() codepaths and has a good change of detecting any
regressions.
Additionally, I succesfully ran the ptrace and seccomp kernel tests"
* tag 'for-linus-2020-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
ptrace: reintroduce usage of subjective credentials in ptrace_has_cap()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix printing misleading Secure-IPL enabled message when it is not.
- Fix a race condition between host ap bus and guest ap bus doing
device reset in crypto code.
- Fix sanity check in CCA cipher key function (CCA AES cipher key
support), which fails otherwise.
* tag 's390-5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/setup: Fix secure ipl message
s390/zcrypt: move ap device reset from bus to driver code
s390/zcrypt: Fix CCA cipher key gen with clear key value function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes in drivers with no impact to core code.
The mptfusion fix is enormous because the driver API had to be
rethreaded to pass down the necessary iocp pointer, but once that's
done a significant chunk of code is deleted.
The other two patches are small"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptfusion: Fix double fetch bug in ioctl
scsi: storvsc: Correctly set number of hardware queues for IDE disk
scsi: fnic: fix invalid stack access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small fixes for 5.5-rc7
Included here are:
- two lkdtm fixes
- coresight build fix
- Documentation update for the hw process document
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/process: Add Amazon contact for embargoed hardware issues
lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP
lkdtm/bugs: Make double-fault test always available
coresight: etm4x: Fix unused function warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small staging and iio driver fixes for 5.5-rc7
All of them are for some small reported issues. Nothing major, full
details in the shortlog.
All have been in linux-next with no reported issues"
* tag 'staging-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: ni_routes: allow partial routing information
staging: comedi: ni_routes: fix null dereference in ni_find_route_source()
iio: light: vcnl4000: Fix scale for vcnl4040
iio: buffer: align the size of scan bytes to size of the largest element
iio: chemical: pms7003: fix unmet triggered buffer dependency
iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
iio: adc: ad7124: Fix DT channel configuration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver and core fixes for 5.5-rc7
There's one fix for hub wakeup issues and a number of small usb-serial
driver fixes and device id updates.
The hub fix has been in linux-next for a while with no reported
issues, and the usb-serial ones have all passed 0-day with no
problems"
* tag 'usb-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: quatech2: handle unbound ports
USB: serial: keyspan: handle unbound ports
USB: serial: io_edgeport: add missing active-port sanity check
USB: serial: io_edgeport: handle unbound ports on URB completion
USB: serial: ch341: handle unbound port at reset_resume
USB: serial: suppress driver bind attributes
USB: serial: option: add support for Quectel RM500Q in QDL mode
usb: core: hub: Improved device recognition on remote wakeup
USB: serial: opticon: fix control-message timeouts
USB: serial: option: Add support for Quectel RM500Q
USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
|
|
Use devm_reset_control_get_optional_exclusive() instead of
devm_reset_control_get_exclusive() as reset controller is optional.
Nevertheless if reset controller is expected but reports an
error, propagate the error code to the caller. In such case
a nice error trace is emitted unless we're deferring the probe
operation.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This change removes the reset controller reference from the local
DAC instance since it is used only at probe time.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The generic IIO mount-matrix property conveys physical orientation of the
hardware chip.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Hardware could be physically mounted in any possible direction and
userpspace needs to be aware of the mounting orientation in order to
process sensor's data correctly. In particular this helps iio-sensor-proxy
to report display's orientation properly on a phone/tablet devices.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Allow to read the mount-matrix device tree property and provide the
mount_matrix file for userspace to read.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Do not print an error trace when deferring probe for some resource.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes.
3 small bug fix patches. The 1st two are aRFS fixes and the last one
fixes a fatal driver load failure on some kernels without PCIe
extended config space support enabled.
Please also queue these for -stable. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DSN read can fail, for example on a kdump kernel without PCIe extended
config space support. If DSN read fails, don't set the
BNXT_FLAG_DSN_VALID flag and continue loading. Check the flag
to see if the stored DSN is valid before using it. Only VF reps
creation should fail without valid DSN.
Fixes: 03213a996531 ("bnxt: move bp->switch_id initialization to PF probe")
Reported-by: Marc Smith <msmith626@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix bnxt_fltr_match() to match ipv6 source and destination addresses.
The function currently only checks ipv4 addresses and will not work
corrently on ipv6 filters.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The NTUPLE related firmware commands are sent to the wrong firmware
channel, causing all these commands to fail on new firmware that
supports the new firmware channel. Fix it by excluding the 3
NTUPLE firmware commands from the list for the new firmware channel.
Fixes: 760b6d33410c ("bnxt_en: Add support for 2nd firmware message channel.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds an entry for ADIS16490 in the list of compatible devices
defined in the dt-bindings of the adis16480 driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADIS16490 is part of the same family with ADIS16495 and ADIS16497,
the main difference is the temperature, accelerometer and gyroscope
scales.
Datasheet:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adis16490.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This puts an upper bound on "val2" but it also needs to have a lower
bound (BMA400_SCALE_MIN).
Fixes: 465c811f1f20 ("iio: accel: Add driver for the BMA400")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Make mpu6050 usable on platforms which provide only any-edge interrupts.
One example of this kind of platform is AT91SAM9G45
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Commit 69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat")
introduced the ability to opt out of audit messages for accesses to various
proc files since they are not violations of policy. While doing so it
somehow switched the check from ns_capable() to
has_ns_capability{_noaudit}(). That means it switched from checking the
subjective credentials of the task to using the objective credentials. This
is wrong since. ptrace_has_cap() is currently only used in
ptrace_may_access() And is used to check whether the calling task (subject)
has the CAP_SYS_PTRACE capability in the provided user namespace to operate
on the target task (object). According to the cred.h comments this would
mean the subjective credentials of the calling task need to be used.
This switches ptrace_has_cap() to use security_capable(). Because we only
call ptrace_has_cap() in ptrace_may_access() and in there we already have a
stable reference to the calling task's creds under rcu_read_lock() there's
no need to go through another series of dereferences and rcu locking done
in ns_capable{_noaudit}().
As one example where this might be particularly problematic, Jann pointed
out that in combination with the upcoming IORING_OP_OPENAT feature, this
bug might allow unprivileged users to bypass the capability checks while
asynchronously opening files like /proc/*/mem, because the capability
checks for this would be performed against kernel credentials.
To illustrate on the former point about this being exploitable: When
io_uring creates a new context it records the subjective credentials of the
caller. Later on, when it starts to do work it creates a kernel thread and
registers a callback. The callback runs with kernel creds for
ktask->real_cred and ktask->cred. To prevent this from becoming a
full-blown 0-day io_uring will call override_cred() and override
ktask->cred with the subjective credentials of the creator of the io_uring
instance. With ptrace_has_cap() currently looking at ktask->real_cred this
override will be ineffective and the caller will be able to open arbitray
proc files as mentioned above.
Luckily, this is currently not exploitable but will turn into a 0-day once
IORING_OP_OPENAT{2} land in v5.6. Fix it now!
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jann Horn <jannh@google.com>
Fixes: 69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Add support of temperature data in fifo for all chips.
Enable unification of scan elements for icm20602.
Add macros for generating scan elements.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Convert to use device_get_match_data() instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since IIO framework supports device property API and driver has been moved
already to the use of GPIO descriptors the logical continuation is to
get rid of platform data completely. We are on the safe side here since
there are no users of it in the kernel.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Ad7124 data-sheet specifies that the falling edge
of the DOUT line should be used for an interrupt.
The current irq flag (IRQF_TRIGGER_LOW) used will
cause unwanted behaviour. When enabling the interrupt
it will fire once because the DOUT line is already low.
This will make the driver to read an unfinished conversion
from the chip.
This patch sets the irq type to the one specified in
the data-sheet.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Before this patch the ad_sigma_delta implementation hardcoded
the irq trigger type to low, assuming that all Sigma-Delta ADCs
have the same interrupt-type.
This patch allows all drivers using the ad_sigma_delta layer to set the
irq trigger type to the one specified in the datasheet.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
virtio: maintain obj reservation lock when submitting cmds (Gerd)
rockchip: increase link rate var size to accommodate rates (Tobias)
mst: serialize down messages and clear timeslots are on unplug (Wayne)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tobias Schramm <t.schramm@manjaro.org>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116162856.GA11524@art_vandelay
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- uAPI fix: Remove dash and colon from PMU names to comply with tools/perf
- Fix for include file that was indirectly included
- Two fixes to make sure VMA are marked active for error capture
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116161419.GA13594@jlahtine-desk.ger.corp.intel.com
|
|
As we reset the GPMI block at resume, the timing parameters setup by a
previous exec_op is lost. Rewriting GPMI timing registers on first exec_op
after resume fixes the problem.
Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
On system resume, the gpmi clock must be enabled before accessing gpmi
block. Without this, resume causes something like
[ 661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout
[ 661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110
[ 661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110
[ 661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110
Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The commit 7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable
methods") forgot to actually set the QE bit in some cases. Thus this
breaks quad mode accesses to flashes which support readback of the
status register-2. Fix it.
Fixes: 7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable methods")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
mtd->size is still unassigned when running spansion_post_sfdp_fixups()
hook, therefore use nor->params.size to determine the size of flash device.
This makes sure that 4-byte addressing opcodes are used on Spansion
flashes that are larger than 16MiB and don't have SFDP 4BAIT table
populated.
Fixes: 92094ebc385e ("mtd: spi-nor: Add spansion_post_sfdp_fixups()")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Pull io_uring fixes form Jens Axboe:
- Ensure ->result is always set when IO is retried (Bijan)
- In conjunction with the above, fix a regression in polled IO issue
when retried (me/Bijan)
- Don't setup async context for read/write fixed, otherwise we may
wrongly map the iovec on retry (me)
- Cancel io-wq work if we fail getting mm reference (me)
- Ensure dependent work is always initialized correctly (me)
- Only allow original task to submit IO, don't allow it from a passed
ring fd (me)
* tag 'io_uring-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
io_uring: only allow submit from owning task
io_uring: ensure workqueue offload grabs ring mutex for poll list
io_uring: clear req->result always before issuing a read/write request
io_uring: be consistent in assigning next work from handler
io-wq: cancel work if we fail getting a mm reference
io_uring: don't setup async context for read/write fixed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes that have been in the works during last twp weeks.
All have a user visible effect and are stable material:
- scrub: properly update progress after calling cancel ioctl, calling
'resume' would start from the beginning otherwise
- fix subvolume reference removal, after moving out of the original
path the reference is not recognized and will lead to transaction
abort
- fix reloc root lifetime checks, could lead to crashes when there's
subvolume cleaning running in parallel
- fix memory leak when quotas get disabled in the middle of extent
accounting
- fix transaction abort in case of balance being started on degraded
mount on eg. RAID1"
* tag 'for-5.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: check rw_devices, not num_devices for balance
Btrfs: always copy scrub arguments back to user space
btrfs: relocation: fix reloc_root lifespan and access
btrfs: fix memory leak in qgroup accounting
btrfs: do not delete mismatched root refs
btrfs: fix invalid removal of root ref
btrfs: rework arguments of btrfs_unlink_subvol
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.5-rc7
Here are a few fixes for issues related to unbound port devices which
could lead to NULL-pointer dereferences. Notably the bind attributes for
usb-serial (port) drivers are removed as almost none of the drivers can
handle individual ports going away once they've been bound.
Included are also some new device ids.
All but the unbound-port fixes have been in linux-next with no reported
issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: quatech2: handle unbound ports
USB: serial: keyspan: handle unbound ports
USB: serial: io_edgeport: add missing active-port sanity check
USB: serial: io_edgeport: handle unbound ports on URB completion
USB: serial: ch341: handle unbound port at reset_resume
USB: serial: suppress driver bind attributes
USB: serial: option: add support for Quectel RM500Q in QDL mode
USB: serial: opticon: fix control-message timeouts
USB: serial: option: Add support for Quectel RM500Q
USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Fix a regression in the last release affecting the ftp module of the
gvfs filesystem"
* tag 'fuse-fixes-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix fuse_send_readpages() in the syncronous read case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became bigger than I have hoped for rc7. But, the only large LOC
is for stm32 fixes that are simple rewriting of register access
helpers, while the rest are all nice and small fixes:
- A few ASoC fixes for the remaining probe error handling bugs
- ALSA sequencer core fix for racy proc file accesses
- Revert the option rename of snd-hda-intel to make compatible again
- Various device-specific fixes"
* tag 'sound-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Fix racy access for queue timer in proc read
ALSA: usb-audio: fix sync-ep altsetting sanity check
ASoC: msm8916-wcd-digital: Reset RX interpolation path after use
ASoC: msm8916-wcd-analog: Fix MIC BIAS Internal1
ASoC: cros_ec_codec: Make the device acpi compatible
ASoC: sti: fix possible sleep-in-atomic
ASoC: msm8916-wcd-analog: Fix selected events for MIC BIAS External1
ASoC: hdac_hda: Fix error in driver removal after failed probe
ASoC: SOF: Intel: fix HDA codec driver probe with multiple controllers
ASoC: SOF: Intel: lower print level to dbg if we will reinit DSP
ALSA: dice: fix fallback from protocol extension into limited functionality
ALSA: firewire-tascam: fix corruption due to spin lock without restoration in SoftIRQ context
ALSA: hda: Rename back to dmic_detect option
ASoC: stm32: dfsdm: fix 16 bits record
ASoC: stm32: sai: fix possible circular locking
ASoC: Fix NULL dereference at freeing
ASoC: Intel: bytcht_es8316: Fix Irbis NB41 netbook quirk
ASoC: rt5640: Fix NULL dereference on module unload
|
|
Check for NULL port data in the modem- and line-status handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe).
Note that the other (stubbed) event handlers qt2_process_xmit_empty()
and qt2_process_flush() would need similar sanity checks in case they
are ever implemented.
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: stable <stable@vger.kernel.org> # 3.5
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Check for NULL port data in the control URB completion handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe()).
Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The driver receives the active port number from the device, but never
made sure that the port number was valid. This could lead to a
NULL-pointer dereference or memory corruption in case a device sends
data for an invalid port.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Check for NULL port data in the shared interrupt and bulk completion
callbacks to avoid dereferencing a NULL pointer in case a device sends
data for a port device which isn't bound to a driver (e.g. due to a
malicious device having unexpected endpoints or after an allocation
failure on port probe).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Check for NULL port data in reset_resume() to avoid dereferencing a NULL
pointer in case the port device isn't bound to a driver (e.g. after a
failed control request at port probe).
Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume")
Cc: stable <stable@vger.kernel.org> # 2.6.30
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The fstest btrfs/154 reports
[ 8675.381709] BTRFS: Transaction aborted (error -28)
[ 8675.383302] WARNING: CPU: 1 PID: 31900 at fs/btrfs/block-group.c:2038 btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.390925] CPU: 1 PID: 31900 Comm: btrfs Not tainted 5.5.0-rc6-default+ #935
[ 8675.392780] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[ 8675.395452] RIP: 0010:btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
[ 8675.402672] RSP: 0018:ffffb2090888fb00 EFLAGS: 00010286
[ 8675.404413] RAX: 0000000000000000 RBX: ffff92026dfa91c8 RCX: 0000000000000001
[ 8675.406609] RDX: 0000000000000000 RSI: ffffffff8e100899 RDI: ffffffff8e100971
[ 8675.408775] RBP: ffff920247c61660 R08: 0000000000000000 R09: 0000000000000000
[ 8675.410978] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffe4
[ 8675.412647] R13: ffff92026db74000 R14: ffff920247c616b8 R15: ffff92026dfbc000
[ 8675.413994] FS: 00007fd5e57248c0(0000) GS:ffff92027d800000(0000) knlGS:0000000000000000
[ 8675.416146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8675.417833] CR2: 0000564aa51682d8 CR3: 000000006dcbc004 CR4: 0000000000160ee0
[ 8675.419801] Call Trace:
[ 8675.420742] btrfs_start_dirty_block_groups+0x355/0x480 [btrfs]
[ 8675.422600] btrfs_commit_transaction+0xc8/0xaf0 [btrfs]
[ 8675.424335] reset_balance_state+0x14a/0x190 [btrfs]
[ 8675.425824] btrfs_balance.cold+0xe7/0x154 [btrfs]
[ 8675.427313] ? kmem_cache_alloc_trace+0x235/0x2c0
[ 8675.428663] btrfs_ioctl_balance+0x298/0x350 [btrfs]
[ 8675.430285] btrfs_ioctl+0x466/0x2550 [btrfs]
[ 8675.431788] ? mem_cgroup_charge_statistics+0x51/0xf0
[ 8675.433487] ? mem_cgroup_commit_charge+0x56/0x400
[ 8675.435122] ? do_raw_spin_unlock+0x4b/0xc0
[ 8675.436618] ? _raw_spin_unlock+0x1f/0x30
[ 8675.438093] ? __handle_mm_fault+0x499/0x740
[ 8675.439619] ? do_vfs_ioctl+0x56e/0x770
[ 8675.441034] do_vfs_ioctl+0x56e/0x770
[ 8675.442411] ksys_ioctl+0x3a/0x70
[ 8675.443718] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 8675.445333] __x64_sys_ioctl+0x16/0x20
[ 8675.446705] do_syscall_64+0x50/0x210
[ 8675.448059] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 8675.479187] BTRFS: error (device vdb) in btrfs_create_pending_block_groups:2038: errno=-28 No space left
We now use btrfs_can_overcommit() to see if we can flip a block group
read only. Before this would fail because we weren't taking into
account the usable un-allocated space for allocating chunks. With my
patches we were allowed to do the balance, which is technically correct.
The test is trying to start balance on degraded mount. So now we're
trying to allocate a chunk and cannot because we want to allocate a
RAID1 chunk, but there's only 1 device that's available for usage. This
results in an ENOSPC.
But we shouldn't even be making it this far, we don't have enough
devices to restripe. The problem is we're using btrfs_num_devices(),
that also includes missing devices. That's not actually what we want, we
need to use rw_devices.
The chunk_mutex is not needed here, rw_devices changes only in device
add, remove or replace, all are excluded by EXCL_OP mechanism.
Fixes: e4d8ec0f65b9 ("Btrfs: implement online profile changing")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add stacktrace, update changelog, drop chunk_mutex ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If scrub returns an error we are not copying back the scrub arguments
structure to user space. This prevents user space to know how much
progress scrub has done if an error happened - this includes -ECANCELED
which is returned when users ask for scrub to stop. A particular use
case, which is used in btrfs-progs, is to resume scrub after it is
canceled, in that case it relies on checking the progress from the scrub
arguments structure and then use that progress in a call to resume
scrub.
So fix this by always copying the scrub arguments structure to user
space, overwriting the value returned to user space with -EFAULT only if
copying the structure failed to let user space know that either that
copying did not happen, and therefore the structure is stale, or it
happened partially and the structure is probably not valid and corrupt
due to the partial copy.
Reported-by: Graham Cobb <g.btrfs@cobb.uk.net>
Link: https://lore.kernel.org/linux-btrfs/d0a97688-78be-08de-ca7d-bcb4c7fb397e@cobb.uk.net/
Fixes: 06fe39ab15a6a4 ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Graham Cobb <g.btrfs@cobb.uk.net>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"This reverts the GPIOLIB_IRQCHIP in the ThunderX driver.
ThunderX is a piece of Arm-based server chip. I converted the driver
to hierarchical gpiochip without access to real silicon and failed
miserably since I didn't take MSI's into account.
Kevin Hao helpfully stepped in and fixed it properly, let's revert it
for v5.5 and put the proper conversion into v5.6"
* tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
|
|
Pull block fixes from Jens Axboe:
"Three fixes that should go into this release:
- The 32-bit segment size fix that I mentioned last week (Ming)
- Use uint for the block size (Mikulas)
- A null_blk zone write handling fix (Damien)"
* tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
block: fix an integer overflow in logical block size
null_blk: Fix zone write handling
block: fix get_max_segment_size() overflow on 32bit arch
|
|
We would not be transmitting using the correct SYSTEMPORT transmit queue
during ndo_select_queue() which looks up the internal TX ring map
because while establishing the mapping we would be off by 4, so for
instance, when we populate switch port mappings we would be doing:
switch port 0, queue 0 -> ring index #0
switch port 0, queue 1 -> ring index #1
...
switch port 0, queue 3 -> ring index #3
switch port 1, queue 0 -> ring index #8 (4 + 4 * 1)
...
instead of using ring index #4. This would cause our ndo_select_queue()
to use the fallback queue mechanism which would pick up an incorrect
ring for that switch port. Fix this by using the correct switch queue
number instead of SYSTEMPORT queue number.
Fixes: 25c440704661 ("net: systemport: Simplify queue mapping logic")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the implementation of the system reset controller we lost a setting
that is currently applied by the bootloader and which configures the IMP
port for 2Gb/sec, the default is 1Gb/sec. This is needed given the
number of ports and applications we expect to run so bring back that
setting.
Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sja1105_parse_ports_node function was tested only on device trees
where all ports were enabled. Fix this check so that the driver
continues to probe only with the ports where status is not "disabled",
as expected.
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
