summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-25wlcore: change warn on missing lock in wlcore_queue_xx funcsArik Nemtsov
On !CONFIG_SMP builds spin_is_locked always returns 0. Assert the locking using assert_spin_locked, which is written to behave correctly in all cases. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-03-25wlcore: report rssi from roaming statisticsNadim Zubidat
report the average beacon rssi which is calculated by firmware for roaming statistics instead of the last rx packet rssi. this results a more accurate rssi reporting Signed-off-by: Nadim Zubidat <nadimz@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-03-25wlcore: consolidate tx_seq handling on recoveryArik Nemtsov
Accumulate the total number of sent packets per-link to find out how far the encryption sequence number has progressed. Use this number as the initial security sequence number after recovery. This consolidates security sequence handling for both chip families, as we no longer have to rely on 12xx specific Tx completion. A fortunate side effect of this is correct management of seq numbers for AP roles and multi-role scenarios. When a link is removed we save the last seq number on a persistent part of the wlvif. This helps the data survive through recoveries/suspends, which also entail changes in the hlid of the link. This functionality is STA only currently. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-03-25wlcore: don't risk using stale HLID during .sta_state callbackArik Nemtsov
The HLID of a STA can change, particularly during recovery. Don't cache the HLID before it was potentially allocated. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-03-25wlcore: fix link count in single-link-PSM optimizationArik Nemtsov
commit 144614f3eebd7d only allowed a single active link when turning on the optimization, ignoring the fact that an AP has two additional global links. Use 3 links as an indication for a single active link. Use the FW PSM bits to verify the extra active link belongs to the AP role. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-03-25wlcore: set max num of Rx BA sessions per chipIgal Chernobelsky
Maximum number of supported RX BA sessions depends on chip type. wl18xx supports 5 RX BA sessions while wl12xx supports 3. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-03-25wlcore: enter elp in force ps mode in 5msIgal Chernobelsky
It is requiered to enter sleep mode with smaller delay in forced PS mode. This fixes issue of testing force PS mode during VoIP traffic where packets are sent every 20ms. Chip never enters ps mode with default 30 ms delay in such test. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-03-24mac80211: Don't restart sta-timer if not associated.Ben Greear
I found another crash when deleting lots of virtual stations in a congested environment. I think the problem is that the ieee80211_mlme_notify_scan_completed could call ieee80211_restart_sta_timer for a stopped interface that was about to be deleted. With the following patch I am unable to reproduce the crash. Signed-off-by: Ben Greear <greearb@candelatech.com> [move check, also make the same change in mesh] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-24cfg80211: always check for scan end on P2P deviceJohannes Berg
If a P2P device wdev is removed while it has a scan, then the scan completion might crash later as it is already freed by that time. To avoid the crash always check the scan completion when the P2P device is being removed for some reason. If the driver already canceled it, don't want and free it, otherwise warn and leak it to avoid later crashes. In order to do this, locking needs to be changed away from the rdev mutex (which can't always be guaranteed). For now, use the sched_scan_mtx instead, I'll rename it to just scan_mtx in a later patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20mac80211: fix virtual monitor interface lockingJohannes Berg
The virtual monitor interface has a locking issue, it calls into the channel context code with the iflist mutex held which isn't allowed since it is usually acquired the other way around. The mutex is still required for the interface iteration, but need not be held across the channel calls. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20cfg80211: fix wdev tracing crashJohannes Berg
Arend reported a crash in tracing if the driver returns an ERR_PTR() value from the add_virtual_intf() callback. This is due to the tracing then still attempting to dereference the "pointer", fix this by using IS_ERR_OR_NULL(). Reported-by: Arend van Spriel <arend@broadcom.com> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20Bluetooth: fix error return code in rfcomm_add_listener()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-03-20iwlwifi: mvm: Add support for different ROC typesIlan Peer
Schedule different time event based on the ROC type Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg
2013-03-20iwlwifi: mvm: Increase the max remain on channel timeIlan Peer
Increase the maximal remain on channel time as longer remain on channel requests are handled by the FW using fragmented time events. This reduces the number of user/kernel space iterations during flows such as p2p_listen. In addition it is currently required for flows which require longer duration such as p2p_sd. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: fix WoWLAN RF-kill bugJohannes Berg
The RF-kill wakeup trigger flag is set in the wrong command, which means it won't work. Also fix the comment in the TCP wakeup trigger code -- the firmware was changed to look at all the different trigger flags. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: tune the move to static SMPS due to BT loadEmmanuel Grumbach
We should disable MIMO only if bt_traffic_load goes up to 3. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: take the valid_{rx,tx}_ant from the TLVEmmanuel Grumbach
This is the right source of information for the valid Tx antennas, not the NVM. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: take the radio type / step / dash from TLVsEmmanuel Grumbach
This data should taken from TLVs and not from the NVM. This is true for the value written in CSR_HW_IF_CONFIG_REG too. Also, no need to set the CSR_HW_IF_CONFIG_REG_BIT_MAC_SI bit for 7000 devices which are the only devices currently supported. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: specify filter flags in monitor modeJohannes Berg
In firmware "listener" (monitor) mode, we still need to open up the filters with the filter flags to receive all frames. Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: add debug message when a CMD is dropped in RFKILLEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: print the flags in ALIVE notificationEmmanuel Grumbach
This has valuable data about RFkill state seen from the fw side. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: remove 5ghz_disable optionStanislaw Gruszka
5ghz_disable has no effect any longer, that was changed during refactoring of EEPROM reading/parsing. Remove it, wpa_supplicant allow now to specify frequencies, on which device will operate. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: Fix quota handling for monitor interfaceIlan Peer
1. Quota for the monitor interface should be added only if there is a channel context assigned to the interface. 2. In the unassign channel context flow, need to remove the quota for the monitor interface binding, before unbinding. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: use kmemdup instead of kmalloc+memcpyAndrei Epure
Signed-off-by: Andrei Epure <epure.andrei@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: Remove obsolete queue definitionsIlan Peer
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: don't support multi-channel inhibitionEmmanuel Grumbach
This feature is not implemented yet in firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: fix the {ack,cts}_kill_mskEmmanuel Grumbach
The masks were wrong. They should be 0xffffffff when SCO, HID or SNIFF profiles are used. They should be 0xffff0000 in any other case (default) to get a bit more throughput when the BT profile allows for it. Fix a debug print on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20cfg80211: fix error return code in cfg80211_init()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20cfg80211: fix potential connection work crashJohannes Berg
If wpa_supplicant and iw/iwconfig are used together, very rarely the system crashes. It seems to be related to the connection parameters not being set up, but it's not all clear to me how this happens. In any case, checking that the conn pointer exists here is probably a good idea. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20ath6kl: fix size_t printf warningsKalle Valo
My new tracing code for ath6kl introduced these warnings on 64-bit: trace.h:38:1: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' [-Wformat] trace.h:61:1: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' [-Wformat] trace.h:84:1: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat] trace.h:119:1: warning: format '%d' expects argument of type 'int', but argument 7 has type 'size_t' [-Wformat] trace.h:173:1: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' [-Wformat] trace.h:193:1: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat] trace.h:221:1: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat] Fix them by using %zd. Reported-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-20iwlwifi: dvm: don't send HCMD in restart flowEmmanuel Grumbach
There is a race between the restart flow and the workers. The workers are cancelled after the fw is already killed and might send HCMD when there is fw to handle them. Simply check that there is a fw to which the HCMD can be sent before actually sending it. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: set rfkill in internal state of the transportEmmanuel Grumbach
We didn't update the internal of the PCIe transport when we read the RFkill state directly. Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: fix length check in multi-TB HCMDEmmanuel Grumbach
As reported by Ben Hutchings, there was a harmless issue in the checks being done on the lengths of the TBs while building the TFD for a multi-TB host command. Cc: stable@vger@kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: Add beacon notification handlerIlan Peer
Mostly for debugging purposes Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: suppress key error messages in AP modeJohannes Berg
In AP mode, don't attempt to program GTKs into the device, they're used for TX only so not needed and programming them causes error messages. Also, in this case and if key programming fails, avoid trying to remove the key that isn't present later. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20iwlwifi: mvm: MVM op_mode is supported on 7000 onlyEmmanuel Grumbach
The code removed in this patch was used for bring up on older NICs. No MVM capable fw will ever be released for older NICs, so remove that code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-18mac80211_hwsim: assign CAB queue properly on interface type changeJohannes Berg
When an interface change type, the CAB queue must be reassigned, do this in hwsim to avoid warnings/crashes. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-18rt2800: 5592: add more USB devices IDsStanislaw Gruszka
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: iq calibration for 5GHzStanislaw Gruszka
Based on: RT5592_IQCalibration() DPO_RT5572_LinuxSTA_2.6.1.3_20121022/cips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add KconfigStanislaw Gruszka
Enable support to 5592 chip. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: TXWI & RXWI descriptors sizeStanislaw Gruszka
Based on: TXWI_STRUC RXWI_STRUC from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/include/chip/rtmp_mac.h Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add chip specific vgc calculationsStanislaw Gruszka
Based on: RT5592_ChipAGCAdjust() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add AGC initStanislaw Gruszka
Based on: RT5592_RTMPAGCInit() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: add write_with_rx_chain functionStanislaw Gruszka
Based on: AsicBBPWriteWithRxChain() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: rearrange bbp/rfcsr initializationStanislaw Gruszka
This makes order of initialization of various registers similar like on vendor driver. Based on: NICInitializeAsic() RT5592LoadRFNormalModeSetup() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chip/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add iq calibrationStanislaw Gruszka
Based on: GetIQCalibration() IQCalibration() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: more channel switch registers settings (BBP & GLRT)Stanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: enable rf initStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: setup LDO_CFG0 when configuring channelStanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-07-16 19:48:19 +0000