| Age | Commit message (Collapse) | Author |
|---|
|
Original errors:
Documentation/networking/net_cachelines/index.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Documentation/networking/net_cachelines/inet_connection_sock.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Documentation/networking/net_cachelines/inet_sock.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Documentation/networking/net_cachelines/net_device.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Documentation/networking/net_cachelines/snmp.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Documentation/networking/net_cachelines/tcp_sock.rst:3: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Fixes: 14006f1d8fa2 ("Documentations: Analyze heavily used Networking related structs")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Link: https://lore.kernel.org/r/20231204220728.746134-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are multiple ways to query for the carrier state: through
rtnetlink, sysfs, and (possibly) ethtool. Synchronize linkwatch
work before these operations so that we don't have a situation
where userspace queries the carrier state between the driver's
carrier off->on transition and linkwatch running and expects it
to work, when really (at least) TX cannot work until linkwatch
has run.
I previously posted a longer explanation of how this applies to
wireless [1] but with this wireless can simply query the state
before sending data, to ensure the kernel is ready for it.
[1] https://lore.kernel.org/all/346b21d87c69f817ea3c37caceb34f1f56255884.camel@sipsolutions.net/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231204214706.303c62768415.I1caedccae72ee5a45c9085c5eb49c145ce1c0dd5@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Coco Li says:
====================
Reorganize remaining patch of networking struct cachelines
Rebase patches to top-of-head in https://lwn.net/Articles/951321/ to
ensure the results of the cacheline savings are still accurate.
====================
Link: https://lore.kernel.org/r/20231204201232.520025-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The variables are organized according in the following way:
- TX read-mostly hotpath cache lines
- TXRX read-mostly hotpath cache lines
- RX read-mostly hotpath cache lines
- TX read-write hotpath cache line
- TXRX read-write hotpath cache line
- RX read-write hotpath cache line
Fastpath cachelines end after rcvq_space.
Cache line boundaries are enforced only between read-mostly and
read-write. That is, if read-mostly tx cachelines bleed into
read-mostly txrx cachelines, we do not care. We care about the
boundaries between read and write cachelines because we want
to prevent false sharing.
Fast path variables span cache lines before change: 12
Fast path variables span cache lines after change: 8
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231204201232.520025-3-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reorganize fast path variables on tx-txrx-rx order
Fastpath variables end after npinfo.
Below data generated with pahole on x86 architecture.
Fast path variables span cache lines before change: 12
Fast path variables span cache lines after change: 4
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231204201232.520025-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Inquire firmware on supported offloads, as well as convey offloads
enabled dynamically to firmware. New control net API functionality is
required for the above. Implement control net API framework for
offloads.
Additionally, fetch/insert offload metadata from hardware RX/TX
buffer respectively during receive/transmit.
Currently supported offloads include checksum and TSO.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231204154940.2583140-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tobias Waldekranz says:
====================
net: mvmdio: Performance related improvements
Observations of the XMDIO bus on a CN9130-based system during a
firmware download showed a very low bus utilization, which stemmed
from the 150us (10x the average access time) sleep which would take
place when the first poll did not succeed.
With this series in place, bus throughput increases by about 10x,
multiplied by whatever gain you are able to extract from running the
MDC at a higher frequency (hardware dependent).
====================
Link: https://lore.kernel.org/r/20231204100811.2708884-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support the standard "clock-frequency" attribute to set the generated
MDC frequency. If not specified, the driver will leave the divisor
untouched.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231204100811.2708884-4-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before this change, when operating in polled mode, i.e. no IRQ is
available, every individual C45 access would be hit with a 150us sleep
after the bus access.
For example, on a board with a CN9130 SoC connected to an MV88X3310
PHY, a single C45 read would take around 165us:
root@infix:~$ mdio f212a600.mdio-mii mmd 4:1 bench 0xc003
Performed 1000 reads in 165ms
By replacing the long sleep with a tighter poll loop, we observe a 10x
increase in bus throughput:
root@infix:~$ mdio f212a600.mdio-mii mmd 4:1 bench 0xc003
Performed 1000 reads in 15ms
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231204100811.2708884-3-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ynl.h has a growing amount of "internal" stuff, which may confuse
users who try to take a look at the external API. Currently the
internals are at the bottom of the file with a banner in between,
but this arrangement makes it hard to add external APIs / inline
helpers which need internal definitions.
Move internals to a separate header.
Link: https://lore.kernel.org/r/20231202211225.342466-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If kernel didn't give use any meaningful error - print
a strerror() to the ynl error message.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20231202211310.342716-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 1768d8a767f8 ("tools/net/ynl: Add support for create flags")
added support for setting legacy netlink CRUD flags on netlink
messages (NLM_F_REPLACE, _EXCL, _CREATE etc.).
Most of genetlink won't need these, don't force callers to pass
in an empty argument to each do() call.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231202211005.341613-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.
Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.
To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.
When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.
Fixes: 3aa7857fe1d7 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Uwe Kleine-König says:
====================
net*: Convert to platform remove callback returning void
(implicit) v1 of this series can be found at
https://lore.kernel.org/netdev/20231117095922.876489-1-u.kleine-koenig@pengutronix.de.
Changes since then:
- Dropped patch #1 as Alex objected. Patch #1 (was #2 before) now
converts ipa to remove_new() and introduces an error message in the
error path that failed before.
====================
Link: https://lore.kernel.org/r/cover.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20231117095922.876489-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/49795ee930be6a9a24565e5e7133e6f8383ab532.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/b0488fa6181a47668e5737905ae7adc8d7cd055e.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/8c9ffca75ea24810f9ba05a514d5ad59847cc4fe.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/7c1d50d559c0e0e36a20eb3e410f6e9d3f884b6f.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231117095922.876489-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/82b728e14a68c421e269eff3b8083d9d6e62d956.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/4889ac6a7ffa9b02fa5cdd2d3212e739741f80b8.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/c43193b9a002e88da36b111bb44ce2973ecde722.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When flow_indr_dev_register() fails, bnxt_init_tc will free
bp->tc_info through kfree(). However, the caller function
bnxt_init_one() will ignore this failure and call
bnxt_shutdown_tc() on failure of bnxt_dl_register(), where
a use-after-free happens. Fix this issue by setting
bp->tc_info to NULL after kfree().
Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Based on the previous allocated packet, page_offset can be not null
in veth_convert_skb_to_xdp_buff routine.
Take into account page fragment offset during the skb paged area copy
in veth_convert_skb_to_xdp_buff().
Fixes: 2d0de67da51a ("net: veth: use newly added page pool API for veth with xdp")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/eddfe549e7e626870071930964ac3c38a1dc8068.1701702000.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function exceeds the stack frame warning limit:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pri':
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:1039:1: error: the frame size of 1408 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Use dynamic allocation for the largest stack object instead. It
would be nice to rewrite this file to completely avoid the extra
buffer and just use the one that was already allocated by debugfs,
but that is a much larger change.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231204085735.4112882-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and
ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if
blocks. If every single branch of the series of if statements exited, this
would be fine. However, the rx_coalesce_usecs is checked against zero to
print an informative message if use_adaptive_rx_coalesce is enabled. If
this check is true, it short circuits the entire chain of statements,
preventing validation of the tx_coalesce_usecs field.
Indeed, since commit e792779e6b63 ("iavf: Prevent changing static ITR
values if adaptive moderation is on") the iavf driver actually rejects any
change to the tx_coalesce_usecs or rx_coalesce_usecs when
use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making
this checking a bit redundant.
Fix this error by removing the unnecessary and redundant checks for
use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a
valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields
are already unsigned, remove the minimum value check. This allows assigning
an ITR value ranging from 0-8160 as described by the printed message.
Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") added
a warning message that reports unexpected size of port's MFS (max
frame size) value. This message use for the port number local
variable 'i' that is wrong.
In i40e_probe() this 'i' variable is used only to iterate VSIs
to find FDIR VSI:
<code>
...
/* if FDIR VSI was set up, start it now */
for (i = 0; i < pf->num_alloc_vsi; i++) {
if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
i40e_vsi_open(pf->vsi[i]);
break;
}
}
...
</code>
So the warning message use for the port number index of FDIR VSI
if this exists or pf->num_alloc_vsi if not.
Fix the message by using 'pf->hw.port' for the port number.
Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix setting dis_rx_filtering depending on whether port vlan is being
turned on or off. This was originally fixed in commit c793f8ea15e3 ("ice:
Fix disabling Rx VLAN filtering with port VLAN enabled"), but while
refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the
fix along with the original comment from that change.
Also delete duplicate lines in ice_port_vlan_on().
Fixes: 2946204b3fa8 ("ice: implement bridge port vlan")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
vfs::num_msix_per should be only used as default value for
vf->num_msix. For other use cases vf->num_msix should be used, as VF can
have different MSI-X amount values.
Fix incorrect register index calculation. vfs::num_msix_per and
pf->sriov_base_vector shouldn't be used after implementation of changing
MSI-X amount on VFs. Instead vf->first_vector_idx should be used, as it
is storing value for first irq index.
Fixes: fe1c5ca2fe76 ("ice: implement num_msix field per VF")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ynl-generated user space C code is already above 25kLoC
and is growing.
The initial reason to commit these files was to make reviewing changes
to the generator easier. Unfortunately, it has the opposite effect on
reviewing changes to specs, and we get far more changes to specs
than to the generator.
Uncommit those fails, as they are generated on the fly as needed.
netdev patchwork now runs a script on each series to create a diff
of generated code on the fly, for the rare cases when looking at
it is helpful:
https://github.com/kuba-moo/nipa/blob/master/tests/series/ynl/ynl.sh
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alex Austin says:
====================
sfc: Implement ndo_hwtstamp_(get|set)
Implement ndo_hwtstamp_get and ndo_hwtstamp_set for sfc and sfc-siena.
====================
Link: https://lore.kernel.org/r/20231130135826.19018-1-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update efx->ptp_data to use kernel_hwtstamp_config and implement
ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from
efx_ioctl.
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231130135826.19018-3-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update efx->ptp_data to use kernel_hwtstamp_config and implement
ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from
efx_ioctl.
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231130135826.19018-2-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl)
after the create_workqueue fails, and after that free, the rvu_dl will
be translate back through rvu_npa_health_reporters_create,
rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the
err_dl_health label, being freed again in
rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy.
In the second calls of rvu_npa_health_reporters_destroy, however,
it uses rvu_dl->rvu_npa_health_reporter, which is already freed at
the end of rvu_npa_health_reporters_destroy in the first call.
So this patch prevents the first destroy by instantly returning -ENONMEN
when create_workqueue fails. In addition, since the failure of
create_workqueue is the only entrence of label err, it has been
integrated into the error-handling path of create_workqueue.
Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20231202095902.3264863-1-alexious@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In xsk_poll(), checking available events and setting mask bits should
be executed only when a socket has been bound. Setting mask bits for
unbound socket is meaningless.
Currently, it checks events even when xsk_check_common() failed.
To prevent this, we move goto location (skip_tx) after that checking.
Fixes: 1596dae2f17e ("xsk: check IFF_UP earlier in Tx path")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231201061048.GA1510@libra05
|
|
The .parse_protocol hook function in the ipvlan_header_ops structure is
not implemented. As a result, when the AF_PACKET family is used to send
packets, skb->protocol will be set to 0.
Ipvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use
eth_header_parse_protocol function to obtain the protocol.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231202130438.2266343-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The .parse_protocol hook function in the macvlan_header_ops structure is
not implemented. As a result, when the AF_PACKET family is used to send
packets, skb->protocol will be set to 0.
Macvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use
eth_header_parse_protocol function to obtain the protocol.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231202130658.2266526-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Hangbin Liu says:
====================
Conver net selftests to run in unique namespace (Part 1)
As Guillaume pointed, many selftests create namespaces with very common
names (like "client" or "server") or even (partially) run directly in init_net.
This makes these tests prone to failure if another namespace with the same
name already exists. It also makes it impossible to run several instances
of these tests in parallel.
This patch set intend to conver all the net selftests to run in unique namespace,
so we can update the selftest freamwork to run all tests in it's own namespace
in parallel. After update, we only need to wait for the test which need
longest time.
As the total patch set is too large. I break it to severl parts. This is
the first part.
v2 -> v3:
- Convert all ip netns del to cleanup_ns (Justin Iurman)
v1 -> v2:
- Split the large patch set to small parts for easy review (Paolo Abeni)
- Move busywait from forwarding/lib.sh to net/lib.sh directly (Petr Machata)
- Update setup_ns/cleanup_ns struct (Petr Machata)
- Remove default trap in lib.sh (Petr Machata)
====================
Link: https://lore.kernel.org/r/20231202020110.362433-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Here is the test result after conversion.
# ./unicast_extensions.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
Unicast address extensions tests (behavior of reserved IPv4 addresses)
###########################################################################
TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ]
TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ]
TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ]
...
TEST: assign and ping class D address (is forbidden) [ OK ]
TEST: routing using class D (is forbidden) [ OK ]
TEST: routing using 127/8 (is forbidden) [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Here is the test result after conversion.
]# ./sctp_vrf.sh
Testing For SCTP VRF:
TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y [PASS]
...
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [PASS]
***v6 Tests Done***
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
namespace
Here is the test result after conversion.
]# ./ndisc_unsolicited_na_test.sh
TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=1 forwarding=1 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=0 forwarding=0 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=0 forwarding=1 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=0 accept_untracked_na=1 forwarding=0 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=0 forwarding=0 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=0 forwarding=1 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=1 forwarding=0 [ OK ]
TEST: test_unsolicited_na: drop_unsolicited_na=1 accept_untracked_na=1 forwarding=1 [ OK ]
Tests passed: 8
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Here is the test result after conversion.
]# ./l2tp.sh
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel [ OK ]
TEST: IPv6 route through L2TP tunnel [ OK ]
TEST: IPv4 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv4 route through L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 route through L2TP tunnel - after IPsec teardown [ OK ]
Tests passed: 16
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Here is the test result after conversion.
]# ./ioam6.sh
--------------------------------------------------------------------------
OUTPUT tests
--------------------------------------------------------------------------
TEST: Unknown IOAM namespace (inline mode) [ OK ]
TEST: Unknown IOAM namespace (encap mode) [ OK ]
TEST: Missing trace room (inline mode) [ OK ]
TEST: Missing trace room (encap mode) [ OK ]
TEST: Trace type with bit 0 only (inline mode) [ OK ]
...
TEST: Full supported trace (encap mode) [ OK ]
--------------------------------------------------------------------------
GLOBAL tests
--------------------------------------------------------------------------
TEST: Forward - Full supported trace (inline mode) [ OK ]
TEST: Forward - Full supported trace (encap mode) [ OK ]
- Tests passed: 88
- Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Here is the test result after conversion.
]# ./icmp.sh
OK
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Here is the test result after conversion.
# ./icmp_redirect.sh
###########################################################################
Legacy routing
###########################################################################
TEST: IPv4: redirect exception [ OK ]
...
TEST: IPv4: mtu exception plus redirect [ OK ]
TEST: IPv6: mtu exception plus redirect [ OK ]
Tests passed: 40
Tests failed: 0
Tests xfailed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Here is the test result after conversion.
]# ./traceroute.sh
TEST: IPV6 traceroute [ OK ]
TEST: IPV4 traceroute [ OK ]
Tests passed: 2
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Here is the test result after conversion.
]# ./drop_monitor_tests.sh
Software drops test
TEST: Capturing active software drops [ OK ]
TEST: Capturing inactive software drops [ OK ]
Hardware drops test
TEST: Capturing active hardware drops [ OK ]
TEST: Capturing inactive hardware drops [ OK ]
Tests passed: 4
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Here is the test result after conversion.
]# ./cmsg_ipv6.sh
OK
]# ./cmsg_so_mark.sh
OK
]# ./cmsg_time.sh
OK
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
namespace
Here is the test result after conversion.
2 tests also failed without this patch
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=1 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When do arping, the interface need to be specified. Or we will
get error: Interface "lo" is not ARPable. And the test failed.
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [FAIL]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL]
After fix:
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
Fixes: 0ea7b0a454ca ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
namespace
Here is the test result after conversion.
]# ./arp_ndisc_evict_nocarrier.sh
run arp_evict_nocarrier=1 test
ok
run arp_evict_nocarrier=0 test
ok
run all.arp_evict_nocarrier=0 test
ok
run ndisc_evict_nocarrier=1 test
ok
run ndisc_evict_nocarrier=0 test
ok
run all.ndisc_evict_nocarrier=0 test
ok
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
