summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-23Drivers: hv: vmbus: Get the IRQ number from DeviceTreeRoman Kisel
The VMBus driver uses ACPI for interrupt assignment on arm64 hence it won't function in the VTL mode where only DeviceTree can be used. Update the VMBus driver to discover interrupt configuration from DT. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-9-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-9-romank@linux.microsoft.com>
2025-05-23dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence propertiesRoman Kisel
To boot in the VTL mode, VMBus on arm64 needs interrupt description which the binding documentation lacks. The transactions on the bus are DMA coherent which is not mentioned as well. Add the interrupt property and the DMA coherence property to the VMBus binding. Update the example to match that. Fix typos. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250428210742.435282-8-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-8-romank@linux.microsoft.com>
2025-05-23arm64, x86: hyperv: Report the VTL the system boots inRoman Kisel
The hyperv guest code might run in various Virtual Trust Levels. Report the level when the kernel boots in the non-default (0) one. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-7-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-7-romank@linux.microsoft.com>
2025-05-23arm64: hyperv: Initialize the Virtual Trust Level fieldRoman Kisel
Various parts of the hyperv code need to know what VTL the kernel runs at, most notably VMBus needs that to establish communication with the host. Initialize the Virtual Trust Level field to enable booting in the Virtual Trust Level. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-6-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-6-romank@linux.microsoft.com>
2025-05-23Drivers: hv: Provide arch-neutral implementation of get_vtl()Roman Kisel
To run in the VTL mode, Hyper-V drivers have to know what VTL the system boots in, and the arm64/hyperv code does not have the means to compute that. Refactor the code to hoist the function that detects VTL, make it arch-neutral to be able to employ it to get the VTL on arm64. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Link: https://lore.kernel.org/r/20250428210742.435282-5-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-5-romank@linux.microsoft.com>
2025-05-23Drivers: hv: Enable VTL mode for arm64Roman Kisel
Kconfig dependencies for arm64 guests on Hyper-V require that be ACPI enabled, and limit VTL mode to x86/x64. To enable VTL mode on arm64 as well, update the dependencies. Since VTL mode requires DeviceTree instead of ACPI, don’t require arm64 guests on Hyper-V to have ACPI unconditionally. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-4-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-4-romank@linux.microsoft.com>
2025-05-23arm64: hyperv: Use SMCCC to detect hypervisor presenceRoman Kisel
The arm64 Hyper-V startup path relies on ACPI to detect running under a Hyper-V compatible hypervisor. That doesn't work on non-ACPI systems. Hoist the ACPI detection logic into a separate function. Then use the vendor-specific hypervisor service call (implemented recently in Hyper-V) via SMCCC in the non-ACPI case. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-3-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-3-romank@linux.microsoft.com>
2025-05-23arm64: kvm, smccc: Introduce and use API for getting hypervisor UUIDRoman Kisel
The KVM/arm64 uses SMCCC to detect hypervisor presence. That code is private, and it follows the SMCCC specification. Other existing and emerging hypervisor guest implementations can and should use that standard approach as well. Factor out a common infrastructure that the guests can use, update KVM to employ the new API. The central notion of the SMCCC method is the UUID of the hypervisor, and the new API follows that. No functional changes. Validated with a KVM/arm64 guest. Signed-off-by: Roman Kisel <romank@linux.microsoft.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20250428210742.435282-2-romank@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250428210742.435282-2-romank@linux.microsoft.com>
2025-05-23tools: hv: Enable debug logs for hv_kvp_daemonShradha Gupta
Allow the KVP daemon to log the KVP updates triggered in the VM with a new debug flag(-d). When the daemon is started with this flag, it logs updates and debug information in syslog with loglevel LOG_DEBUG. This information comes in handy for debugging issues where the key-value pairs for certain pools show mismatch/incorrect values. The distro-vendors can further consume these changes and modify the respective service files to redirect the logs to specific files as needed. Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1744715978-8185-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1744715978-8185-1-git-send-email-shradhagupta@linux.microsoft.com>
2025-05-23PCI/AER: Add sysfs attributes for log ratelimitsJon Pan-Doh
Allow userspace to read/write log ratelimits per device (including enable/disable). Create aer/ sysfs directory to store them and any future AER configs. The new sysfs files are: /sys/bus/pci/devices/*/aer/correctable_ratelimit_burst /sys/bus/pci/devices/*/aer/correctable_ratelimit_interval_ms /sys/bus/pci/devices/*/aer/nonfatal_ratelimit_burst /sys/bus/pci/devices/*/aer/nonfatal_ratelimit_interval_ms The default values are ratelimit_burst=10, ratelimit_interval_ms=5000, so if we try to emit more than 10 messages in a 5 second period, some are suppressed. Update AER sysfs ABI filename to reflect the broader scope of AER sysfs attributes (e.g. stats and ratelimits). Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats -> sysfs-bus-pci-devices-aer Tested using aer-inject[1]. Configured correctable log ratelimit to 5. Sent 6 AER errors. Observed 5 errors logged while AER stats (cat /sys/bus/pci/devices/<dev>/aer_dev_correctable) shows 6. Disabled ratelimiting and sent 6 more AER errors. Observed all 6 errors logged and accounted in AER stats (12 total errors). [1] https://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git [bhelgaas: note fatal errors are not ratelimited, "aer_report" -> "aer_info", replace ratelimit_log_enable toggle with *_ratelimit_interval_ms] Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com> Signed-off-by: Jon Pan-Doh <pandoh@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-21-helgaas@kernel.org
2025-05-23PCI/AER: Add ratelimits to PCI AER DocumentationJon Pan-Doh
Add ratelimits section for rationale and defaults. [bhelgaas: note fatal errors are not ratelimited] Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com> Signed-off-by: Jon Pan-Doh <pandoh@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://patch.msgid.link/20250522232339.1525671-20-helgaas@kernel.org
2025-05-23PCI/AER: Ratelimit correctable and non-fatal error loggingJon Pan-Doh
Spammy devices can flood kernel logs with AER errors and slow/stall execution. Add per-device ratelimits for AER correctable and non-fatal uncorrectable errors that use the kernel defaults (10 per 5s). Logging of fatal errors is not ratelimited. There are two AER logging entry points: - aer_print_error() is used by DPC and native AER - pci_print_aer() is used by GHES and CXL The native AER aer_print_error() case includes a loop that may log details from multiple devices, which are ratelimited individually. If we log details for any device, we also log the Error Source ID from the Root Port or RCEC. If no such device details are found, we still log the Error Source from the ERR_* Message, ratelimited by the Root Port or RCEC that received it. The DPC aer_print_error() case is not ratelimited, since this only happens for fatal errors. The CXL pci_print_aer() case is ratelimited by the Error Source device. The GHES pci_print_aer() case is via aer_recover_work_func(), which searches for the Error Source device. If the device is not found, there's no per-device ratelimit, so we use a system-wide ratelimit that covers all error types (correctable, non-fatal, and fatal). Sargun at Meta reported internally that a flood of AER errors causes RCU CPU stall warnings and CSD-lock warnings. Tested using aer-inject[1]. Sent 11 AER errors. Observed 10 errors logged while AER stats (cat /sys/bus/pci/devices/<dev>/aer_dev_correctable) show true count of 11. [1] https://git.kernel.org/pub/scm/linux/kernel/git/gong.chen/aer-inject.git [bhelgaas: commit log, factor out trace_aer_event() and aer_print_rp_info() changes to previous patches, enable Error Source logging if any downstream detail will be printed, don't ratelimit fatal errors, "aer_report" -> "aer_info", "cor_log_ratelimit" -> "correctable_ratelimit", "uncor_log_ratelimit" -> "nonfatal_ratelimit"] Reported-by: Sargun Dhillon <sargun@meta.com> Signed-off-by: Jon Pan-Doh <pandoh@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-19-helgaas@kernel.org
2025-05-23PCI/AER: Simplify add_error_device()Bjorn Helgaas
Return -ENOSPC error early so the usual path through add_error_device() is the straightline code. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-18-helgaas@kernel.org
2025-05-23PCI/AER: Convert aer_get_device_error_info(), aer_print_error() to indexBjorn Helgaas
Previously aer_get_device_error_info() and aer_print_error() took a pointer to struct aer_err_info and a pointer to a pci_dev. Typically the pci_dev was one of the elements of the aer_err_info.dev[] array (DPC was an exception, where the dev[] array was unused). Convert aer_get_device_error_info() and aer_print_error() to take an index into the aer_err_info.dev[] array instead. A future patch will add per-device ratelimit information, so the index makes it convenient to find the ratelimit associated with the device. To accommodate DPC, set info->dev[0] to the DPC port before using these interfaces. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-17-helgaas@kernel.org
2025-05-23tpm_crb: ffa_tpm: fix/update comments describing the CRB over FFA ABIStuart Yoder
-Fix the comment describing the 'start' function, which was a cut/paste mistake for a different function. -The comment for DIRECT_REQ and DIRECT_RESP only mentioned AArch32 and listed 32-bit function IDs. Update to include 64-bit. Signed-off-by: Stuart Yoder <stuart.yoder@arm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-05-23tpm_crb_ffa: use dev_xx() macro to print logYeoreum Yun
Instead of pr_xxx() macro, use dev_xxx() to print log. This patch changes some error log level to warn log level when the tpm_crb_ffa secure partition doesn't support properly but system can run without it. (i.e) unsupport of direct message ABI or unsupported ABI version Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-05-23tpm_ffa_crb: access tpm service over FF-A direct message request v2Yeoreum Yun
For secure partition with multi service, tpm_ffa_crb can access tpm service with direct message request v2 interface according to chapter 3.3, TPM Service Command Response Buffer Interface Over FF-A specificationi v1.0 BET. This patch reflects this spec to access tpm service over FF-A direct message request v2 ABI. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-05-23tpm: remove kmalloc failure error messageColin Ian King
The kmalloc failure message is just noise. Remove it and replace -EFAULT with -ENOMEM as standard for out of memory allocation error returns. Link: https://lore.kernel.org/linux-integrity/20250430083435.860146-1-colin.i.king@gmail.com/ Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2025-05-23PCI/AER: Rename struct aer_stats to aer_infoKarolina Stolarek
Update name to reflect the broader definition of structs/variables that are stored (e.g. ratelimits). This is a preparatory patch for adding rate limit support. [bhelgaas: "aer_report" -> "aer_info"] Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-16-helgaas@kernel.org
2025-05-23PCI/AER: Reduce pci_print_aer() correctable error level to KERN_WARNINGKarolina Stolarek
Some existing logs in pci_print_aer() log with error severity by default. Convert them to use KERN_WARNING for correctable errors and KERN_ERR for uncorrectable errors. [bhelgaas: commit log] Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-15-helgaas@kernel.org
2025-05-23PCI/ERR: Add printk level to pcie_print_tlp_log()Bjorn Helgaas
aer_print_error() produces output at a printk level (KERN_ERR/KERN_WARNING/ etc) that depends on the kind of error, and it calls pcie_print_tlp_log(), which previously always produced output at KERN_ERR. Add a "level" parameter so aer_print_error() can control the level of the pcie_print_tlp_log() output to match. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-14-helgaas@kernel.org
2025-05-23PCI/AER: Check log level once and remember itKarolina Stolarek
When reporting an AER error, we check its type multiple times to determine the log level for each message. Do this check only in the top-level functions (aer_isr_one_error(), pci_print_aer()) and save the level in struct aer_err_info. [bhelgaas: save log level in struct aer_err_info instead of passing it as a parameter] Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-13-helgaas@kernel.org
2025-05-23PCI/AER: Trace error event before ratelimitingBjorn Helgaas
As with the AER statistics, we always want to emit trace events, even if the actual dmesg logging is rate limited. Call trace_aer_event() immediately after pci_dev_aer_stats_incr() so both happen before ratelimiting. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-12-helgaas@kernel.org
2025-05-23PCI/AER: Update statistics before ratelimitingBjorn Helgaas
There are two AER logging entry points: - aer_print_error() is used by DPC (dpc_process_error()) and native AER handling (aer_process_err_devices()). - pci_print_aer() is used by GHES (aer_recover_work_func()) and CXL (cxl_handle_rdport_errors()) Both use __aer_print_error() to print the AER error bits. Previously __aer_print_error() also incremented the AER statistics via pci_dev_aer_stats_incr(). Call pci_dev_aer_stats_incr() early in the entry points instead of in __aer_print_error() so we update the statistics even if the actual printing of error bits is rate limited by a future change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-11-helgaas@kernel.org
2025-05-23PCI/AER: Simplify pci_print_aer()Bjorn Helgaas
Simplify pci_print_aer() by initializing the struct aer_err_info "info" with a designated initializer list (it was previously initialized with memset()) and using pci_name(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-10-helgaas@kernel.org
2025-05-23PCI/AER: Initialize aer_err_info before using itBjorn Helgaas
Previously the struct aer_err_info "e_info" was allocated on the stack without being initialized, so it contained junk except for the fields we explicitly set later. Initialize "e_info" at declaration with a designated initializer list, which initializes the other members to zero. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-9-helgaas@kernel.org
2025-05-23PCI/AER: Move aer_print_source() earlier in fileBjorn Helgaas
Move aer_print_source() earlier in the file so a future change can use it from aer_print_error(), where it's easier to rate limit it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-8-helgaas@kernel.org
2025-05-23PCI/AER: Rename aer_print_port_info() to aer_print_source()Jon Pan-Doh
Rename aer_print_port_info() to aer_print_source() to be more descriptive. This logs the Error Source ID logged by a Root Port or Root Complex Event Collector when it receives an ERR_COR, ERR_NONFATAL, or ERR_FATAL Message. [bhelgaas: aer_print_rp_info() -> aer_print_source()] Signed-off-by: Jon Pan-Doh <pandoh@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-7-helgaas@kernel.org
2025-05-23PCI/AER: Extract bus/dev/fn in aer_print_port_info() with PCI_BUS_NUM(), etcBjorn Helgaas
Use PCI_BUS_NUM(), PCI_SLOT(), PCI_FUNC() to extract the bus number, device, and function number directly from the Error Source ID. There's no need to shift and mask it explicitly. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-6-helgaas@kernel.org
2025-05-23PCI/AER: Consolidate Error Source ID logging in aer_isr_one_error_type()Bjorn Helgaas
Previously we decoded the AER Error Source ID in aer_isr_one_error_type(), then again in find_source_device() if we didn't find any devices with errors logged in their AER Capabilities. Consolidate this so we only decode and log the Error Source ID once in aer_isr_one_error_type(). Add a "found" parameter so we can add a note when we didn't find any downstream devices with errors logged in their AER Capability. This changes the dmesg logging when we found no devices with errors logged: - pci 0000:00:01.0: AER: Correctable error message received from 0000:02:00.0 - pci 0000:00:01.0: AER: found no error details for 0000:02:00.0 + pci 0000:00:01.0: AER: Correctable error message received from 0000:02:00.0 (no details found) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-5-helgaas@kernel.org
2025-05-23PCI/AER: Factor COR/UNCOR error handling out from aer_isr_one_error()Bjorn Helgaas
aer_isr_one_error() duplicates the Error Source ID logging and AER error processing for Correctable Errors and Uncorrectable Errors. Factor out the duplicated code to aer_isr_one_error_type(). aer_isr_one_error() doesn't need the struct aer_rpc pointer, so pass it the Root Port or RCEC pci_dev pointer instead. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-4-helgaas@kernel.org
2025-05-23PCI/DPC: Log Error Source ID only when validBjorn Helgaas
DPC Error Source ID is only valid when the DPC Trigger Reason indicates that DPC was triggered due to reception of an ERR_NONFATAL or ERR_FATAL Message (PCIe r6.0, sec 7.9.14.5). When DPC was triggered by ERR_NONFATAL (PCI_EXP_DPC_STATUS_TRIGGER_RSN_NFE) or ERR_FATAL (PCI_EXP_DPC_STATUS_TRIGGER_RSN_FE) from a downstream device, log the Error Source ID (decoded into domain/bus/device/function). Don't print the source otherwise, since it's not valid. For DPC trigger due to reception of ERR_NONFATAL or ERR_FATAL, the dmesg logging changes: - pci 0000:00:01.0: DPC: containment event, status:0x000d source:0x0200 - pci 0000:00:01.0: DPC: ERR_FATAL detected + pci 0000:00:01.0: DPC: containment event, status:0x000d, ERR_FATAL received from 0000:02:00.0 and when DPC triggered for other reasons, where DPC Error Source ID is undefined, e.g., unmasked uncorrectable error: - pci 0000:00:01.0: DPC: containment event, status:0x0009 source:0x0200 - pci 0000:00:01.0: DPC: unmasked uncorrectable error detected + pci 0000:00:01.0: DPC: containment event, status:0x0009: unmasked uncorrectable error detected Previously the "containment event" message was at KERN_INFO and the "%s detected" message was at KERN_WARNING. Now the single message is at KERN_WARNING. Fixes: 26e515713342 ("PCI: Add Downstream Port Containment driver") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20250522232339.1525671-3-helgaas@kernel.org
2025-05-23PCI/DPC: Initialize aer_err_info before using itBjorn Helgaas
Previously the struct aer_err_info "info" was allocated on the stack without being initialized, so it contained junk except for the fields we explicitly set later. Initialize "info" at declaration so it starts as all zeros. Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-2-helgaas@kernel.org
2025-05-23ASoC: codecs: add support for ES8375Mark Brown
Merge series from Zhang Yi <zhangyi@everest-semi.com>: The driver is for codec ES8375 of everest-semi.
2025-05-23spi: spi-qpic-snand: extend bitmasks usageMark Brown
Merge series from Gabor Juhos <j4g8y7@gmail.com>: The two patches in the series are extending the usage of FIELD_PREP() macro and predefined bitmasks usage in the driver.
2025-05-23spi: spi-qpic-snand: return early on error from qcom_spi_io_op()Gabor Juhos
When submitting of the descriptors fails, it is quite likely that the register read buffer contains no valid data. Even if the data is valid the function returns with an error code anyway. Change the code to return early if qcom_submit_descs() fails to avoid superfluously copying possibly invalid data. Also change the return statement at the end of the function to use zero value to indicate success obviusly. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://patch.msgid.link/20250515-qpic-snand-early-error-v1-1-681c87611213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-23Merge tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - Fix for rename regression due to the recent VFS lookup changes - Fix write failure - locking fix for oplock handling * tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: use list_first_entry_or_null for opinfo_get_list() ksmbd: fix rename failure ksmbd: fix stream write failure
2025-05-23selftests: ublk: add test for UBLK_F_QUIESCEMing Lei
Add test generic_11 for covering new control command of UBLK_U_CMD_QUIESCE_DEV. Add 'quiesce -n dev_id' sub-command on ublk utility for transitioning device state to quiesce states, then verify the feature via generic_10 by doing quiesce and recovery. Cc: Yoav Cohen <yoav@nvidia.com> Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250522163523.406289-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-23ublk: add feature UBLK_F_QUIESCEMing Lei
Add feature UBLK_F_QUIESCE, which adds control command `UBLK_U_CMD_QUIESCE_DEV` for quiescing device, then device state can become `UBLK_S_DEV_QUIESCED` or `UBLK_S_DEV_FAIL_IO` finally from ublk_ch_release() with ublk server cooperation. This feature can help to support to upgrade ublk server application by shutting down ublk server gracefully, meantime keep ublk block device persistent during the upgrading period. The feature is only available for UBLK_F_USER_RECOVERY. Suggested-by: Yoav Cohen <yoav@nvidia.com> Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250522163523.406289-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-23selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZEMing Lei
Add test generic_10 for covering new control command of UBLK_U_CMD_UPDATE_SIZE. Add 'update_size -s|--size size_in_bytes' sub-command on ublk utility for supporting this feature, then verify the feature via generic_10. Cc: Omri Mann <omri@nvidia.com> Cc: Jared Holzman <jholzman@nvidia.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250522163523.406289-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-23i2c: Use str_read_write() helperYumeng Fang
Remove hard-coded strings by using the str_read_write() helper. Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn> Signed-off-by: Yunjian Long <long.yunjian@zte.com.cn> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-05-23traceevent/block: Add REQ_ATOMIC flag to block trace eventsRitesh Harjani (IBM)
Filesystems like XFS can implement atomic write I/O using either REQ_ATOMIC flag set in the bio or via CoW operation. It will be useful if we have a flag in trace events to distinguish between the two. This patch adds char 'U' (Untorn writes) to rwbs field of the trace events if REQ_ATOMIC flag is set in the bio. <W/ REQ_ATOMIC> ================= xfs_io-4238 [009] ..... 4148.126843: block_rq_issue: 259,0 WFSU 16384 () 768 + 32 none,0,0 [xfs_io] <idle>-0 [009] d.h1. 4148.129864: block_rq_complete: 259,0 WFSU () 768 + 32 none,0,0 [0] <W/O REQ_ATOMIC> =============== xfs_io-4237 [010] ..... 4143.325616: block_rq_issue: 259,0 WS 16384 () 768 + 32 none,0,0 [xfs_io] <idle>-0 [010] d.H1. 4143.329138: block_rq_complete: 259,0 WS () 768 + 32 none,0,0 [0] Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://lore.kernel.org/r/44317cb2ec4588f6a2c1501a96684e6a1196e8ba.1747921498.git.ritesh.list@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-23Merge tag 'i2c-host-6.16' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow i2c-host updates for v6.16 Cleanups and refactorings - Many drivers switched to dev_err_probe() - Generic cleanups applied to designware, iproc, ismt, mlxbf, npcm7xx, qcom-geni, pasemi, and thunderx - davinci: declare I2C mangling support among I2C features - designware: clean up DTS handling - designware: fix PM runtime on driver unregister - imx: improve error logging during probe - lpc2k: improve checks in probe error path - xgene-slimpro: improve PCC shared memory handling - pasemi: improve error handling in reset, smbus clear, timeouts - tegra: validate buffer length during transfers - wmt: convert binding to YAML format Improvements and extended support: - microchip-core: add SMBus support - mlxbf: add support for repeated start in block transfers - mlxbf: improve timer configuration - npcm: attempt clock toggle recovery before failing init - octeon: add support for block mode operations - pasemi: add support for unjam device feature - riic: add support for bus recovery New device support: - MediaTek Dimensity 1200 (MT6893) - Sophgo SG2044 - Renesas RZ/V2N (R9A09G056) - Rockchip RK3528 - AMD ISP (new driver) Misc changes: - core: add support for Write Disable-aware SPD
2025-05-23thermal: qcom: ipq5018: make ops_ipq5018 struct staticGeorge Moussalem
Fix a sparse warning by making the ops_ipq5018 struct static. Fixes: 04b31cc53fe0 ("thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505202356.S21Sc7bk-lkp@intel.com/ Signed-off-by: George Moussalem <george.moussalem@outlook.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://patch.msgid.link/20250522-ipq5018-tsens-sparse-v1-1-97edaaaef27c@outlook.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-23Merge branches 'fixes', 'apple/dart', 'arm/smmu/updates', ↵Joerg Roedel
'arm/smmu/bindings', 'fsl/pamu', 'mediatek', 'renesas/ipmmu', 's390', 'intel/vt-d', 'amd/amd-vi' and 'core' into next
2025-05-23iommu/vt-d: Restore context entry setup order for aliased devicesLu Baolu
Commit 2031c469f816 ("iommu/vt-d: Add support for static identity domain") changed the context entry setup during domain attachment from a set-and-check policy to a clear-and-reset approach. This inadvertently introduced a regression affecting PCI aliased devices behind PCIe-to-PCI bridges. Specifically, keyboard and touchpad stopped working on several Apple Macbooks with below messages: kernel: platform pxa2xx-spi.3: Adding to iommu group 20 kernel: input: Apple SPI Keyboard as /devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 Fix this by restoring the previous context setup order. Fixes: 2031c469f816 ("iommu/vt-d: Add support for static identity domain") Closes: https://lore.kernel.org/all/4dada48a-c5dd-4c30-9c85-5b03b0aa01f0@bfh.ch/ Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20250514060523.2862195-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20250520075849.755012-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2025-05-23Merge tag 'soc-fixes-6.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "A few last minute fixes: - two driver fixes for samsung/google platforms, both addressing mistakes in changes from the 6.15 merge window - a revert for an allwinner devicetree change that caused problems - a fix for an older regression with the LEDs on Marvell Armada 3720 - a defconfig change to enable chacha20 again after a crypto subsystem change in 6.15 inadventently turned it off" * tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection" soc: samsung: usi: prevent wrong bits inversion during unconfiguring firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
2025-05-23thermal/drivers/airoha: Fix spelling mistake "calibrarion" -> "calibration"Colin Ian King
There is a spelling mistake in a dev_info message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://patch.msgid.link/20250522083157.1957240-1-colin.i.king@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-23Merge tag 'platform-drivers-x86-v6.15-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Ilpo Järvinen: - dell-wmi-sysman: Avoid buffer overflow in current_password_store() - fujitsu-laptop: Support Lifebook S2110 hotkeys - intel/pmc: Fix Arrow Lake U/H NPU PCI ID - think-lmi: Fix attribute name usage for non-compliant items - thinkpad_acpi: Ignore battery threshold change event notification * tag 'platform-drivers-x86-v6.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel/pmc: Fix Arrow Lake U/H NPU PCI ID platform/x86: think-lmi: Fix attribute name usage for non-compliant items platform/x86: thinkpad_acpi: Ignore battery threshold change event notification platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store() platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys
2025-05-23ACPI: bus: Bail out if acpi_kobj registration failsArmin Wolf
The ACPI sysfs code will fail to initialize if acpi_kobj is NULL, together with some ACPI drivers. Follow the other firmware subsystems and bail out if the kobject cannot be registered. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20250518185111.3560-2-W_Armin@gmx.de Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-06-10 11:38:46 +0000