| Age | Commit message (Collapse) | Author |
|---|
|
Small additional optimization over the previous patch, bringing us
closer to the original behaviour, except when we need to clone to avoid
a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Avoid transaction restarts due to failure to upgrade - we can traverse a
new iterator without a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_path_get_locks, on failure, shouldn't unlock if we're not issuing
a transaction restart: we might drop locks we're not supposed to (if
path->should_be_locked is set).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Small helper to improve locking assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_path_put_nokeep() was intended for paths we wouldn't need to
preserve for a transaction restart - it always frees them right away
when the ref hits 0.
But since paths are shared, freeing unconditionally is a bug, the path
might have been used elsewhere and have should_be_locked set, i.e. we
need to keep it locked until the end of the transaction.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a ruleset which binds to various interface names via netdev-family
chains and flowtables and massage the notifiers by frequently renaming
interfaces to match these names. While doing so:
- Keep an 'nft monitor' running in background to receive the notifications
- Loop over 'nft list ruleset' to exercise ruleset dump codepath
- Have iperf running so the involved chains/flowtables see traffic
If supported, also test interface wildcard support separately by
creating a flowtable with 'wild*' interface spec and quickly add/remove
matching dummy interfaces.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Notify user space if netdev hooks are updated due to netdev add/remove
events. Send minimal notification messages by introducing
NFT_MSG_NEWDEV/DELDEV message types describing a single device only.
Upon NETDEV_CHANGENAME, the callback has no information about the
interface's old name. To provide a clear message to user space, include
the hook's stored interface name in the notification.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
User space may pass non-nul-terminated NFTA_DEVICE_NAME attribute values
to indicate a suffix wildcard.
Expect for multiple devices to match the given prefix in
nft_netdev_hook_alloc() and populate 'ops_list' with them all.
When checking for duplicate hooks, compare the shortest prefix so a
device may never match more than a single hook spec.
Finally respect the stored prefix length when hooking into new devices
from event handlers.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
No point in having err_hook_alloc, just call return directly. Also
rename err_hook_dev - it's not about the hook's device but freeing the
hook itself.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
For the sake of simplicity, treat them like consecutive NETDEV_REGISTER
and NETDEV_UNREGISTER events. If the new name matches a hook spec and
registration fails, escalate the error and keep things as they are.
To avoid unregistering the newly registered hook again during the
following fake NETDEV_UNREGISTER event, leave hooks alone if their
interface spec matches the new name.
Note how this patch also skips for NETDEV_REGISTER if the device is
already registered. This is not yet possible as the new name would have
to match the old one. This will change with wildcard interface specs,
though.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Handling NETDEV_CHANGENAME events has to traverse all chains/flowtables
twice, prepare for this. No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Hook into new devices if their name matches the hook spec.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Put NETDEV_UNREGISTER handling code into a switch, no functional change
intended as the function is only called for that event yet.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Supporting a 1:n relationship between nft_hook and nf_hook_ops is
convenient since a chain's or flowtable's nft_hooks may remain in place
despite matching interfaces disappearing. This stabilizes ruleset dumps
in that regard and opens the possibility to claim newly added interfaces
which match the spec. Also it prepares for wildcard interface specs
since these will potentially match multiple interfaces.
All spots dealing with hook registration are updated to handle a list of
multiple nf_hook_ops, but nft_netdev_hook_alloc() only adds a single
item for now to retain the old behaviour. The only expected functional
change here is how vanishing interfaces are handled: Instead of dropping
the respective nft_hook, only the matching nf_hook_ops are dropped.
To safely remove individual ops from the list in netdev handlers, an
rcu_head is added to struct nf_hook_ops so kfree_rcu() may be used.
There is at least nft_flowtable_find_dev() which may be iterating
through the list at the same time.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The function accesses only the hook's ops field, pass it directly. This
prepares for nft_hooks holding a list of nf_hook_ops in future.
While at it, make use of the function in
__nft_unregister_flowtable_net_hooks() as well.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Facilitate binding and registering of a flowtable hook via a single
function call.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Also a pretty dull wrapper around the hook->ops.dev comparison for now.
Will search the embedded nf_hook_ops list in future. The ugly cast to
eliminate the const qualifier will vanish then, too.
Since this future list will be RCU-protected, also introduce an _rcu()
variant here.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pointless wrappers around kfree() for now, prep work for an embedded
list of nf_hook_ops.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add the minimal relevant info needed for userspace ("nftables monitor
trace") to provide the conntrack view of the packet:
- state (new, related, established)
- direction (original, reply)
- status (e.g., if connection is subject to dnat)
- id (allows to query ctnetlink for remaining conntrack state info)
Example:
trace id a62 inet filter PRE_RAW packet: iif "enp0s3" ether [..]
[..]
trace id a62 inet filter PRE_MANGLE conntrack: ct direction original ct state new ct id 32
trace id a62 inet filter PRE_MANGLE packet: [..]
[..]
trace id a62 inet filter IN conntrack: ct direction original ct state new ct status dnat-done ct id 32
[..]
In this case one can see that while NAT is active, the new connection
isn't subject to a translation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
While nf_conntrack_id() doesn't need any functionaliy from conntrack, it
does reside in nf_conntrack_core.c -- callers add a module
dependency on conntrack.
Followup patch will need to compute the conntrack id from nf_tables_trace.c
to include it in nf_trace messages emitted to userspace via netlink.
I don't want to introduce a module dependency between nf_tables and
conntrack for this.
Since trace is slowpath, the added indirection is ok.
One alternative is to move nf_conntrack_id to the netfilter/core.c,
but I don't see a compelling reason so far.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_dup_skb_recursion is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Move nf_dup_skb_recursion to struct netdev_xmit, provide wrappers.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nft_pcpu_tun_ctx is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a nft_inner_tun_ctx member (original
nft_pcpu_tun_ctx) and a local_lock_t and use local_lock_nested_bh() for
locking. This change adds only lockdep coverage and does not alter the
functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_skb_duplicated is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Due to the recursion involved, the simplest change is to make it a
per-task variable.
Move the per-CPU variable nf_skb_duplicated to task_struct and name it
in_nf_duplicate. Add it to the existing bitfield so it doesn't use
additional memory.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When dumping a nft_tunnel with more than one geneve_opt configured the
netlink attribute hierarchy should be as follow:
NFTA_TUNNEL_KEY_OPTS
|
|--NFTA_TUNNEL_KEY_OPTS_GENEVE
| |
| |--NFTA_TUNNEL_KEY_GENEVE_CLASS
| |--NFTA_TUNNEL_KEY_GENEVE_TYPE
| |--NFTA_TUNNEL_KEY_GENEVE_DATA
|
|--NFTA_TUNNEL_KEY_OPTS_GENEVE
| |
| |--NFTA_TUNNEL_KEY_GENEVE_CLASS
| |--NFTA_TUNNEL_KEY_GENEVE_TYPE
| |--NFTA_TUNNEL_KEY_GENEVE_DATA
|
|--NFTA_TUNNEL_KEY_OPTS_GENEVE
...
Otherwise, userspace tools won't be able to fetch the geneve options
configured correctly.
Fixes: 925d844696d9 ("netfilter: nft_tunnel: add support for geneve opts")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Replace the existing VRF test with a more comprehensive one.
It tests following combinations:
- fib type (returns address type, e.g. unicast)
- fib oif (route output interface index
- both with and without 'iif' keyword (changes result, e.g.
'fib daddr type local' will be true when the destination address
is configured on the local machine, but
'fib daddr . iif type local' will only be true when the destination
address is configured on the incoming interface.
Add all types of addresses to test with for both ipv4 and ipv6:
- local address on the incoming interface
- local address on another interface
- local address on another interface thats part of a vrf
- address on another host
The ruleset stores obtained results from 'fib' in nftables sets and
then queries the sets to check that it has the expected results.
Perform one pass while packets are coming in on interface NOT part of
a VRF and then again when it was added and make sure fib returns the
expected routes and address types for the various addresses in the
setup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
fib has two modes:
1. Obtain output device according to source or destination address
2. Obtain the type of the address, e.g. local, unicast, multicast.
'fib daddr type' should return 'local' if the address is configured
in this netns or unicast otherwise.
'fib daddr . iif type' should return 'local' if the address is configured
on the input interface or unicast otherwise, i.e. more restrictive.
However, if the interface is part of a VRF, then 'fib daddr type'
returns unicast even if the address is configured on the incoming
interface.
This is broken for both ipv4 and ipv6.
In the ipv4 case, inet_dev_addr_type must only be used if the
'iif' or 'oif' (strict mode) was requested.
Else inet_addr_type_dev_table() needs to be used and the correct
dev argument must be passed as well so the correct fib (vrf) table
is used.
In the ipv6 case, the bug is similar, without strict mode, dev is NULL
so .flowi6_l3mdev will be set to 0.
Add a new 'nft_fib_l3mdev_master_ifindex_rcu()' helper and use that
to init the .l3mdev structure member.
For ipv6, use it from nft_fib6_flowi_init() which gets called from
both the 'type' and the 'route' mode eval functions.
This provides consistent behaviour for all modes for both ipv4 and ipv6:
If strict matching is requested, the input respectively output device
of the netfilter hooks is used.
Otherwise, use skb->dev to obtain the l3mdev ifindex.
Without this, most type checks in updated nft_fib.sh selftest fail:
FAIL: did not find veth0 . 10.9.9.1 . local in fibtype4
FAIL: did not find veth0 . dead:1::1 . local in fibtype6
FAIL: did not find veth0 . dead:9::1 . local in fibtype6
FAIL: did not find tvrf . 10.0.1.1 . local in fibtype4
FAIL: did not find tvrf . 10.9.9.1 . local in fibtype4
FAIL: did not find tvrf . dead:1::1 . local in fibtype6
FAIL: did not find tvrf . dead:9::1 . local in fibtype6
FAIL: fib expression address types match (iif in vrf)
(fib errounously returns 'unicast' for all of them, even
though all of these addresses are local to the vrf).
Fixes: f6d0cbcf09c5 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Without this header, the build of the new qat_6xxx driver fails when
CONFIG_PCI_IOV is not set:
In file included from drivers/crypto/intel/qat/qat_common/adf_gen6_shared.c:7:
drivers/crypto/intel/qat/qat_common/adf_gen4_pfvf.h: In function 'adf_gen4_init_pf_pfvf_ops':
drivers/crypto/intel/qat/qat_common/adf_gen4_pfvf.h:13:34: error: 'adf_pfvf_comms_disabled' undeclared (first use in this function)
13 | pfvf_ops->enable_comms = adf_pfvf_comms_disabled;
| ^~~~~~~~~~~~~~~~~~~~~~~
Fixes: 17fd7514ae68 ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When two crypto algorithm lookups occur at the same time with
different names for the same algorithm, e.g., ctr(aes-generic)
and ctr(aes), they will both be instantiated. However, only one
of them can be registered. The second instantiation will fail
with EEXIST.
Avoid failing the second lookup by making it retry, but only once
because there are tricky names such as gcm_base(ctr(aes),ghash)
that will always fail, despite triggering instantiation and EEXIST.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Fixes: 2825982d9d66 ("[CRYPTO] api: Added event notification")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
"VOLAGE" should become "VOLTAGE"
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Brigham Campbell <me@brighamcampbell.com>
Link: https://lore.kernel.org/r/20250521214851.386796-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
typec_match() takes a const pointer, and then decides to cast it away
into a non-const one, which is not a good thing to do overall. Fix this
up by properly setting the pointers to be const to preserve that
attribute.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/2025052126-scholar-stainless-ad55@gregkh
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gadget_match_driver() takes a const pointer, and then decides to cast it
away into a non-const one, which is not a good thing to do overall. Fix
this up by properly setting the pointers to be const to preserve that
attribute.
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Link: https://lore.kernel.org/r/2025052139-rash-unsaddle-7c5e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In struct usb_function, the struct usb_function_instance pointer
variable "fi" is listed as const, but it is written to in numerous
places, making the const marking of it a total lie. Fix this up by just
removing the const pointer attribute as this is modified in numerous
places.
Link: https://lore.kernel.org/r/2025052145-undress-puma-f7cf@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 6.16-rc1
Here are the USB serial updates for 6.16-rc1, including:
- fix of an incorrect const cast
- removal of a bogus read urb sanity check
- support for a couple of new pl2303 device types
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
USB: serial: ti_usb_3410_5052: drop bogus read urb check
|
|
The driver is for codec es8375 of everest
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250523025502.23214-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device tree binding documentation for Everest ES8375
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250523025502.23214-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
* kvm-arm64/misc-6.16:
: .
: Misc changes and improvements for 6.16:
:
: - Add a new selftest for the SVE host state being corrupted by a guest
:
: - Keep HCR_EL2.xMO set at all times for systems running with the kernel at EL2,
: ensuring that the window for interrupts is slightly bigger, and avoiding
: a pretty bad erratum on the AmpereOne HW
:
: - Replace a couple of open-coded on/off strings with str_on_off()
:
: - Get rid of the pKVM memblock sorting, which now appears to be superflous
:
: - Drop superflous clearing of ICH_LR_EOI in the LR when nesting
:
: - Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers from
: a pretty bad case of TLB corruption unless accesses to HCR_EL2 are
: heavily synchronised
:
: - Add a per-VM, per-ITS debugfs entry to dump the state of the ITS tables
: in a human-friendly fashion
: .
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: vgic-its: Add debugfs interface to expose ITS tables
arm64: errata: Work around AmpereOne's erratum AC04_CPU_23
KVM: arm64: nv: Remove clearing of ICH_LR<n>.EOI if ICH_LR<n>.HW == 1
KVM: arm64: Drop sort_memblock_regions()
KVM: arm64: selftests: Add test for SVE host corruption
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Replace ternary flags with str_on_off() helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-nv:
: .
: Flick the switch on the NV support by adding the missing piece
: in the form of the VNCR page management. From the cover letter:
:
: "This is probably the most interesting bit of the whole NV adventure.
: So far, everything else has been a walk in the park, but this one is
: where the real fun takes place.
:
: With FEAT_NV2, most of the NV support revolves around tricking a guest
: into accessing memory while it tries to access system registers. The
: hypervisor's job is to handle the context switch of the actual
: registers with the state in memory as needed."
: .
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
KVM: arm64: Document NV caps and vcpu flags
KVM: arm64: Allow userspace to request KVM_ARM_VCPU_EL2*
KVM: arm64: nv: Remove dead code from ERET handling
KVM: arm64: nv: Plumb TLBI S1E2 into system instruction dispatch
KVM: arm64: nv: Add S1 TLB invalidation primitive for VNCR_EL2
KVM: arm64: nv: Program host's VNCR_EL2 to the fixmap address
KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU notifiers
KVM: arm64: nv: Handle mapping of VNCR_EL2 at EL2
KVM: arm64: nv: Handle VNCR_EL2-triggered faults
KVM: arm64: nv: Add userspace and guest handling of VNCR_EL2
KVM: arm64: nv: Add pseudo-TLB backing VNCR_EL2
KVM: arm64: nv: Don't adjust PSTATE.M when L2 is nesting
KVM: arm64: nv: Move TLBI range decoding to a helper
KVM: arm64: nv: Snapshot S1 ASID tagging information during walk
KVM: arm64: nv: Extract translation helper from the AT code
KVM: arm64: nv: Allocate VNCR page when required
arm64: sysreg: Add layout for VNCR_EL2
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/at-fixes-6.16:
: .
: Set of fixes for Address Translation (AT) instruction emulation,
: which affect the (not yet upstream) NV support.
:
: From the cover letter:
:
: "Here's a small series of fixes for KVM's implementation of address
: translation (aka the AT S1* instructions), addressing a number of
: issues in increasing levels of severity:
:
: - We misreport PAR_EL1.PTW in a number of occasions, including state
: that is not possible as per the architecture definition
:
: - We don't handle access faults at all, and that doesn't play very
: well with the rest of the VNCR stuff
:
: - AT S1E{0,1} from EL2 with HCR_EL2.{E2H,TGE}={1,1} will absolutely
: take the host down, no questions asked"
: .
KVM: arm64: Don't feed uninitialised data to HCR_EL2
KVM: arm64: Teach address translation about access faults
KVM: arm64: Fix PAR_EL1.{PTW,S} reporting on AT S1E*
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/fgt-masks: (43 commits)
: .
: Large rework of the way KVM deals with trap bits in conjunction with
: the CPU feature registers. It now draws a direct link between which
: the feature set, the system registers that need to UNDEF to match
: the configuration and bits that need to behave as RES0 or RES1 in
: the trap registers that are visible to the guest.
:
: Best of all, these definitions are mostly automatically generated
: from the JSON description published by ARM under a permissive
: license.
: .
KVM: arm64: Handle TSB CSYNC traps
KVM: arm64: Add FGT descriptors for FEAT_FGT2
KVM: arm64: Allow sysreg ranges for FGT descriptors
KVM: arm64: Add context-switch for FEAT_FGT2 registers
KVM: arm64: Add trap routing for FEAT_FGT2 registers
KVM: arm64: Add sanitisation for FEAT_FGT2 registers
KVM: arm64: Add FEAT_FGT2 registers to the VNCR page
KVM: arm64: Use HCR_EL2 feature map to drive fixed-value bits
KVM: arm64: Use HCRX_EL2 feature map to drive fixed-value bits
KVM: arm64: Allow kvm_has_feat() to take variable arguments
KVM: arm64: Use FGT feature maps to drive RES0 bits
KVM: arm64: Validate FGT register descriptions against RES0 masks
KVM: arm64: Switch to table-driven FGU configuration
KVM: arm64: Handle PSB CSYNC traps
KVM: arm64: Use KVM-specific HCRX_EL2 RES0 mask
KVM: arm64: Remove hand-crafted masks for FGT registers
KVM: arm64: Use computed FGT masks to setup FGT registers
KVM: arm64: Propagate FGT masks to the nVHE hypervisor
KVM: arm64: Unconditionally configure fine-grain traps
KVM: arm64: Use computed masks as sanitisers for FGT registers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/mte-frac:
: .
: Prevent FEAT_MTE_ASYNC from being accidently exposed to a guest,
: courtesy of Ben Horgan. From the cover letter:
:
: "The ID_AA64PFR1_EL1.MTE_frac field is currently hidden from KVM.
: However, when ID_AA64PFR1_EL1.MTE==2, ID_AA64PFR1_EL1.MTE_frac==0
: indicates that MTE_ASYNC is supported. On a host with
: ID_AA64PFR1_EL1.MTE==2 but without MTE_ASYNC support a guest with the
: MTE capability enabled will incorrectly see MTE_ASYNC advertised as
: supported. This series fixes that."
: .
KVM: selftests: Confirm exposing MTE_frac does not break migration
KVM: arm64: Make MTE_frac masking conditional on MTE capability
arm64/sysreg: Expose MTE_frac so that it is visible to KVM
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/ubsan-el2:
: .
: Add UBSAN support to the EL2 portion of KVM, reusing most of the
: existing logic provided by CONFIG_IBSAN_TRAP.
:
: Patches courtesy of Mostafa Saleh.
: .
KVM: arm64: Handle UBSAN faults
KVM: arm64: Introduce CONFIG_UBSAN_KVM_EL2
ubsan: Remove regs from report_ubsan_failure()
arm64: Introduce esr_is_ubsan_brk()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-np-thp-6.16: (21 commits)
: .
: Large mapping support for non-protected pKVM guests, courtesy of
: Vincent Donnefort. From the cover letter:
:
: "This series adds support for stage-2 huge mappings (PMD_SIZE) to pKVM
: np-guests, that is installing PMD-level mappings in the stage-2,
: whenever the stage-1 is backed by either Hugetlbfs or THPs."
: .
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: Extend pKVM selftest for np-guests
KVM: arm64: Selftest for pKVM transitions
KVM: arm64: Don't WARN from __pkvm_host_share_guest()
KVM: arm64: Add .hyp.data section
KVM: arm64: Unconditionally cross check hyp state
KVM: arm64: Defer EL2 stage-1 mapping on share
KVM: arm64: Move hyp state to hyp_vmemmap
KVM: arm64: Introduce {get,set}_host_state() helpers
KVM: arm64: Use 0b11 for encoding PKVM_NOPAGE
KVM: arm64: Fix pKVM page-tracking comments
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Kuniyuki Iwashima says:
====================
af_unix: Introduce SO_PASSRIGHTS.
As long as recvmsg() or recvmmsg() is used with cmsg, it is not
possible to avoid receiving file descriptors via SCM_RIGHTS.
This series introduces a new socket option, SO_PASSRIGHTS, to allow
disabling SCM_RIGHTS. The option is enabled by default.
See patch 8 for background/context.
This series is related to [0], but is split into a separate series,
as most of the patches are specific to af_unix.
The v2 of the BPF LSM extension part will be posted later, once
this series is merged into net-next and has landed in bpf-next.
[0]: https://lore.kernel.org/bpf/20250505215802.48449-1-kuniyu@amazon.com/
Changes:
v5:
* Patch 4
* Fix BPF selftest failure (setget_sockopt.c)
v4: https://lore.kernel.org/netdev/20250515224946.6931-1-kuniyu@amazon.com/
* Patch 6
* Group sk->sk_scm_XXX bits by struct
* Patch 9
* Remove errno handling
v3: https://lore.kernel.org/netdev/20250514165226.40410-1-kuniyu@amazon.com/
* Patch 3
* Remove inline in scm.c
* Patch 4 & 5 & 8
* Return -EOPNOTSUPP in getsockopt()
* Patch 5
* Add CONFIG_SECURITY_NETWORK check for SO_PASSSEC
* Patch 6
* Add kdoc for sk_scm_unused
* Update sk_scm_XXX under lock_sock() in setsockopt()
* Patch 7
* Update changelog (recent change -> aed6ecef55d7)
v2: https://lore.kernel.org/netdev/20250510015652.9931-1-kuniyu@amazon.com/
* Added patch 4 & 5 to reuse sk_txrehash for scm_recv() flags
v1: https://lore.kernel.org/netdev/20250508013021.79654-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
scm_rights.c has various patterns of tests to exercise GC.
Let's add cases where SO_PASSRIGHTS is disabled.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As long as recvmsg() or recvmmsg() is used with cmsg, it is not
possible to avoid receiving file descriptors via SCM_RIGHTS.
This behaviour has occasionally been flagged as problematic, as
it can be (ab)used to trigger DoS during close(), for example, by
passing a FUSE-controlled fd or a hung NFS fd.
For instance, as noted on the uAPI Group page [0], an untrusted peer
could send a file descriptor pointing to a hung NFS mount and then
close it. Once the receiver calls recvmsg() with msg_control, the
descriptor is automatically installed, and then the responsibility
for the final close() now falls on the receiver, which may result
in blocking the process for a long time.
Regarding this, systemd calls cmsg_close_all() [1] after each
recvmsg() to close() unwanted file descriptors sent via SCM_RIGHTS.
However, this cannot work around the issue at all, because the final
fput() may still occur on the receiver's side once sendmsg() with
SCM_RIGHTS succeeds. Also, even filtering by LSM at recvmsg() does
not work for the same reason.
Thus, we need a better way to refuse SCM_RIGHTS at sendmsg().
Let's introduce SO_PASSRIGHTS to disable SCM_RIGHTS.
Note that this option is enabled by default for backward
compatibility.
Link: https://uapi-group.org/kernel-features/#disabling-reception-of-scm_rights-for-af_unix-sockets #[0]
Link: https://github.com/systemd/systemd/blob/v257.5/src/basic/fd-util.c#L612-L628 #[1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For SOCK_STREAM embryo sockets, the SO_PASS{CRED,PIDFD,SEC} options
are inherited from the parent listen()ing socket.
Currently, this inheritance happens at accept(), because these
attributes were stored in sk->sk_socket->flags and the struct socket
is not allocated until accept().
This leads to unintentional behaviour.
When a peer sends data to an embryo socket in the accept() queue,
unix_maybe_add_creds() embeds credentials into the skb, even if
neither the peer nor the listener has enabled these options.
If the option is enabled, the embryo socket receives the ancillary
data after accept(). If not, the data is silently discarded.
This conservative approach works for SO_PASS{CRED,PIDFD,SEC}, but
would not for SO_PASSRIGHTS; once an SCM_RIGHTS with a hung file
descriptor was sent, it'd be game over.
To avoid this, we will need to preserve SOCK_PASSRIGHTS even on embryo
sockets.
Commit aed6ecef55d7 ("af_unix: Save listener for embryo socket.")
made it possible to access the parent's flags in sendmsg() via
unix_sk(other)->listener->sk->sk_socket->flags, but this introduces
an unnecessary condition that is irrelevant for most sockets,
accept()ed sockets and clients.
Therefore, we moved SOCK_PASSXXX into struct sock.
Let’s inherit sk->sk_scm_recv_flags at connect() to avoid receiving
SCM_RIGHTS on embryo sockets created from a parent with SO_PASSRIGHTS=0.
Note that the parent socket is locked in connect() so we don't need
READ_ONCE() for sk_scm_recv_flags.
Now, we can remove !other->sk_socket check in unix_maybe_add_creds()
to avoid slow SOCK_PASS{CRED,PIDFD} handling for embryo sockets
created from a parent with SO_PASS{CRED,PIDFD}=0.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As explained in the next patch, SO_PASSRIGHTS would have a problem
if we assigned a corresponding bit to socket->flags, so it must be
managed in struct sock.
Mixing socket->flags and sk->sk_flags for similar options will look
confusing, and sk->sk_flags does not have enough space on 32bit system.
Also, as mentioned in commit 16e572626961 ("af_unix: dont send
SCM_CREDENTIALS by default"), SOCK_PASSCRED and SOCK_PASSPID handling
is known to be slow, and managing the flags in struct socket cannot
avoid that for embryo sockets.
Let's move SOCK_PASS{CRED,PIDFD,SEC} to struct sock.
While at it, other SOCK_XXX flags in net.h are grouped as enum.
Note that assign_bit() was atomic, so the writer side is moved down
after lock_sock() in setsockopt(), but the bit is only read once
in sendmsg() and recvmsg(), so lock_sock() is not needed there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SCM_CREDENTIALS and SCM_SECURITY can be recv()ed by calling
scm_recv() or scm_recv_unix(), and SCM_PIDFD is only used by
scm_recv_unix().
scm_recv() is called from AF_NETLINK and AF_BLUETOOTH.
scm_recv_unix() is literally called from AF_UNIX.
Let's restrict SO_PASSCRED and SO_PASSSEC to such sockets and
SO_PASSPIDFD to AF_UNIX only.
Later, SOCK_PASS{CRED,PIDFD,SEC} will be moved to struct sock
and united with another field.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk->sk_txrehash is only used for TCP.
Let's restrict SO_TXREHASH to TCP to reflect this.
Later, we will make sk_txrehash a part of the union for other
protocol families.
Note that we need to modify BPF selftest not to get/set
SO_TEREHASH for non-TCP sockets.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
scm_recv() has been placed in scm.h since the pre-git era for no
particular reason (I think), which makes the file really fragile.
For example, when you move SOCK_PASSCRED from include/linux/net.h to
enum sock_flags in include/net/sock.h, you will see weird build failure
due to terrible dependency.
To avoid the build failure in the future, let's move scm_recv(_unix())?
and its callees to scm.c.
Note that only scm_recv() needs to be exported for Bluetooth.
scm_send() should be moved to scm.c too, but I'll revisit later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
