| Age | Commit message (Collapse) | Author |
|---|
|
Suspend-resume cycle test revealed a memory leak in 6.17-rc3
Turns out the slot_id race fix changes accidentally ends up calling
xhci_free_virt_device() with an incorrect vdev parameter.
The vdev variable was reused for temporary purposes right before calling
xhci_free_virt_device().
Fix this by passing the correct vdev parameter.
The slot_id race fix that caused this regression was targeted for stable,
so this needs to be applied there as well.
Fixes: 2eb03376151b ("usb: xhci: Fix slot_id resource race conflict")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/linux-usb/20250829181354.4450-1-00107082@163.com
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Suggested-by: David Wang <00107082@163.com>
Cc: stable@vger.kernel.org
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pending requests will be flushed on disconnect, and the corresponding
TRBs will be turned into No-op TRBs, which are ignored by the xHC
controller once it starts processing the ring.
If the USB debug cable repeatedly disconnects before ring is started
then the ring will eventually be filled with No-op TRBs.
No new transfers can be queued when the ring is full, and driver will
print the following error message:
"xhci_hcd 0000:00:14.0: failed to queue trbs"
This is a normal case for 'in' transfers where TRBs are always enqueued
in advance, ready to take on incoming data. If no data arrives, and
device is disconnected, then ring dequeue will remain at beginning of
the ring while enqueue points to first free TRB after last cancelled
No-op TRB.
s
Solve this by reinitializing the rings when the debug cable disconnects
and DbC is leaving the configured state.
Clear the whole ring buffer and set enqueue and dequeue to the beginning
of ring, and set cycle bit to its initial state.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Decouple allocation of endpoint ring buffer from initialization
of the buffer, and initialization of endpoint context parts from
from the rest of the contexts.
It allows driver to clear up and reinitialize endpoint rings
after disconnect without reallocating everything.
This is a prerequisite for the next patch that prevents the transfer
ring from filling up with cancelled (no-op) TRBs if a debug cable is
reconnected several times without transferring anything.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.17-rc5
- i801: fix device IDs
- in rtl9300:
- fix channel number check in probe
- check data length boundaries in xfer
- drop unsupported SMBus quick operation
|
|
Problem description
===================
Lockdep reports a possible circular locking dependency (AB/BA) between
&pl->state_mutex and &phy->lock, as follows.
phylink_resolve() // acquires &pl->state_mutex
-> phylink_major_config()
-> phy_config_inband() // acquires &pl->phydev->lock
whereas all the other call sites where &pl->state_mutex and
&pl->phydev->lock have the locking scheme reversed. Everywhere else,
&pl->phydev->lock is acquired at the top level, and &pl->state_mutex at
the lower level. A clear example is phylink_bringup_phy().
The outlier is the newly introduced phy_config_inband() and the existing
lock order is the correct one. To understand why it cannot be the other
way around, it is sufficient to consider phylink_phy_change(), phylink's
callback from the PHY device's phy->phy_link_change() virtual method,
invoked by the PHY state machine.
phy_link_up() and phy_link_down(), the (indirect) callers of
phylink_phy_change(), are called with &phydev->lock acquired.
Then phylink_phy_change() acquires its own &pl->state_mutex, to
serialize changes made to its pl->phy_state and pl->link_config.
So all other instances of &pl->state_mutex and &phydev->lock must be
consistent with this order.
Problem impact
==============
I think the kernel runs a serious deadlock risk if an existing
phylink_resolve() thread, which results in a phy_config_inband() call,
is concurrent with a phy_link_up() or phy_link_down() call, which will
deadlock on &pl->state_mutex in phylink_phy_change(). Practically
speaking, the impact may be limited by the slow speed of the medium
auto-negotiation protocol, which makes it unlikely for the current state
to still be unresolved when a new one is detected, but I think the
problem is there. Nonetheless, the problem was discovered using lockdep.
Proposed solution
=================
Practically speaking, the phy_config_inband() requirement of having
phydev->lock acquired must transfer to the caller (phylink is the only
caller). There, it must bubble up until immediately before
&pl->state_mutex is acquired, for the cases where that takes place.
Solution details, considerations, notes
=======================================
This is the phy_config_inband() call graph:
sfp_upstream_ops :: connect_phy()
|
v
phylink_sfp_connect_phy()
|
v
phylink_sfp_config_phy()
|
| sfp_upstream_ops :: module_insert()
| |
| v
| phylink_sfp_module_insert()
| |
| | sfp_upstream_ops :: module_start()
| | |
| | v
| | phylink_sfp_module_start()
| | |
| v v
| phylink_sfp_config_optical()
phylink_start() | |
| phylink_resume() v v
| | phylink_sfp_set_config()
| | |
v v v
phylink_mac_initial_config()
| phylink_resolve()
| | phylink_ethtool_ksettings_set()
v v v
phylink_major_config()
|
v
phy_config_inband()
phylink_major_config() caller #1, phylink_mac_initial_config(), does not
acquire &pl->state_mutex nor do its callers. It must acquire
&pl->phydev->lock prior to calling phylink_major_config().
phylink_major_config() caller #2, phylink_resolve() acquires
&pl->state_mutex, thus also needs to acquire &pl->phydev->lock.
phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is
completely uninteresting, because it only calls phylink_major_config()
if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()).
We need to change nothing there.
Other solutions
===============
The lock inversion between &pl->state_mutex and &pl->phydev->lock has
occurred at least once before, as seen in commit c718af2d00a3 ("net:
phylink: fix ethtool -A with attached PHYs"). The solution there was to
simply not call phy_set_asym_pause() under the &pl->state_mutex. That
cannot be extended to our case though, where the phy_config_inband()
call is much deeper inside the &pl->state_mutex section.
Fixes: 5fd0f1a02e75 ("net: phylink: add negotiation of in-band capabilities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
resolver
Currently phylink_resolve() protects itself against concurrent
phylink_bringup_phy() or phylink_disconnect_phy() calls which modify
pl->phydev by relying on pl->state_mutex.
The problem is that in phylink_resolve(), pl->state_mutex is in a lock
inversion state with pl->phydev->lock. So pl->phydev->lock needs to be
acquired prior to pl->state_mutex. But that requires dereferencing
pl->phydev in the first place, and without pl->state_mutex, that is
racy.
Hence the reason for the extra lock. Currently it is redundant, but it
will serve a functional purpose once mutex_lock(&phy->lock) will be
moved outside of the mutex_lock(&pl->state_mutex) section.
Another alternative considered would have been to let phylink_resolve()
acquire the rtnl_mutex, which is also held when phylink_bringup_phy()
and phylink_disconnect_phy() are called. But since phylink_disconnect_phy()
runs under rtnl_lock(), it would deadlock with phylink_resolve() when
calling flush_work(&pl->resolve). Additionally, it would have been
undesirable because it would have unnecessarily blocked many other call
paths as well in the entire kernel, so the smaller-scoped lock was
preferred.
Link: https://lore.kernel.org/netdev/aLb6puGVzR29GpPx@shell.armlinux.org.uk/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function of_phy_find_device may return NULL, so we need to take
care before dereferencing phy_dev.
Fixes: 64a632da538a ("net: fec: Fix phy_device lookup for phy_reset_after_clk_enable()")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250904091334.53965-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are fuel gauges in the bq27xxx series (e.g. bq27z561) which may in some
cases report 0xff as the value of BQ27XXX_REG_FLAGS that should not be
interpreted as "no battery" like for a disconnected battery with some built
in bq27000 chip.
So restrict the no-battery detection originally introduced by
commit 3dd843e1c26a ("bq27000: report missing device better.")
to the bq27000.
There is no need to backport further because this was hidden before
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Suggested-by: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/dd979fa6855fd051ee5117016c58daaa05966e24.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Since commit
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
the console log of some devices with hdq enabled but no bq27000 battery
(like e.g. the Pandaboard) is flooded with messages like:
[ 34.247833] power_supply bq27000-battery: driver failed to report 'status' property: -1
as soon as user-space is finding a /sys entry and trying to read the
"status" property.
It turns out that the offending commit changes the logic to now return the
value of cache.flags if it is <0. This is likely under the assumption that
it is an error number. In normal errors from bq27xxx_read() this is indeed
the case.
But there is special code to detect if no bq27000 is installed or accessible
through hdq/1wire and wants to report this. In that case, the cache.flags
are set historically by
commit 3dd843e1c26a ("bq27000: report missing device better.")
to constant -1 which did make reading properties return -ENODEV. So everything
appeared to be fine before the return value was passed upwards.
Now the -1 is returned as -EPERM instead of -ENODEV, triggering the error
condition in power_supply_format_property() which then floods the console log.
So we change the detection of missing bq27000 battery to simply set
cache.flags = -ENODEV
instead of -1.
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Cc: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/692f79eb6fd541adb397038ea6e750d4de2deddf.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
In my_tramp1 function .size directive was placed above
ASM_RET instruction, leading to a wrong function size.
Link: https://lore.kernel.org/aK3d7vxNcO52kEmg@vova-pc
Fixes: 9d907f1ae80b ("samples/ftrace: Fix asm function ELF annotations")
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Fixes for use-after-free that resulted in segfaults after merging the
bpf tree.
Also a couple of build and test fixes"
* tag 'perf-tools-fixes-for-v6.17-2025-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbol-elf: Add support for the block argument for libbfd
perf test: Checking BPF metadata collection fails on version string
perf tests: Fix "PE file support" test build
perf bpf-utils: Harden get_bpf_prog_info_linear
perf bpf-utils: Constify bpil_array_desc
perf bpf-event: Fix use-after-free in synthesis
|
|
We did not propagate the __user attribute of the pointers in
__get_kernel_nofault() and __put_kernel_nofault(), which results in
sparse complaining:
>> mm/maccess.c:41:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void const [noderef] __user *from @@ got unsigned long long [usertype] * @@
mm/maccess.c:41:17: sparse: expected void const [noderef] __user *from
mm/maccess.c:41:17: sparse: got unsigned long long [usertype] *
So fix this by correctly casting those pointers.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508161713.RWu30Lv1-lkp@intel.com/
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: f6bff7827a48 ("riscv: uaccess: use 'asm_goto_output' for get_user()")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Cyril Bur <cyrilbur@tenstorrent.com>
Link: https://lore.kernel.org/r/20250903-dev-alex-sparse_warnings_v1-v1-2-7e6350beb700@rivosinc.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
We used to assign 0 to x without an appropriate cast which results in
sparse complaining when x is a pointer:
>> block/ioctl.c:72:39: sparse: sparse: Using plain integer as NULL pointer
So fix this by casting 0 to the correct type of x.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508062321.gHv4kvuY-lkp@intel.com/
Fixes: f6bff7827a48 ("riscv: uaccess: use 'asm_goto_output' for get_user()")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Cyril Bur <cyrilbur@tenstorrent.com>
Link: https://lore.kernel.org/r/20250903-dev-alex-sparse_warnings_v1-v1-1-7e6350beb700@rivosinc.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used.
Fixes: bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250827-kbuf_all-v1-2-1df9882bb01a@debian.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
REG_L is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: be97d0db5f44 ("riscv: VMAP_STACK overflow detection thread-safe")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250725165410.2896641-5-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
emit_ld is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: 2ddec2c80b44 ("riscv, bpf: inline bpf_get_smp_processor_id()")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20250812090256.757273-4-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
emit_ld is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: 19c56d4e5be1 ("riscv, bpf: add internal-only MOV instruction to resolve per-CPU addrs")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250812090256.757273-3-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
The type of the value to write should be determined by the size of the
destination, not by the value itself, which may be a constant. This
aligns the behavior with x86_64, where __typeof__(*(__gu_ptr)) is used
to infer the correct type.
This fixes an issue in put_cmsg, which was only writing 4 out of 8
bytes to the cmsg_len field, causing the glibc tst-socket-timestamp test
to fail.
Fixes: ca1a66cdd685 ("riscv: uaccess: do not do misaligned accesses in get/put_user()")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250724220853.1969954-1-aurelien@aurel32.net
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
REG_L is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide.
The struct currently has a hole after cpu, so little endian accesses
seemed fine.
Fixes: 503638e0babf ("riscv: Stop emitting preventive sfence.vma for new vmalloc mappings")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250725165410.2896641-4-rkrcmar@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Obvious driver patch plus update to sr to add back rotational media
flag since CDROMS are rotational"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sr: Reinstate rotational media flag
scsi: lpfc: Fix buffer free/clear order in deferred receive path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The largest batch of fixes here is a series of fixes for the Freescale
LPSPI driver which James Clark pulled out of their BSP while looking
at support for the NXP S32G version of the controller.
The majority of this turned out to be bug fixes that affect existing
systems with the actual S32G support being just a small quirk that
would be unremarkable by itself, the whole series has had a good
amount of testing and review and the individual patches are all pretty
straightforward by themselves.
We also have a few other driver specific fixes, including a relatively
large but simple one for the Cadence QuadSPI driver"
* tag 'spi-fix-v6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qpic-snand: unregister ECC engine on probe error and device remove
spi: cadence-quadspi: Implement refcount to handle unbind during busy
spi: spi-fsl-lpspi: Add compatible for S32G
spi: spi-fsl-lpspi: Parameterize reading num-cs from hardware
spi: spi-fsl-lpspi: Treat prescale_max == 0 as no erratum
spi: spi-fsl-lpspi: Constify devtype datas
dt-bindings: lpspi: Document support for S32G
spi: spi-fsl-lpspi: Clear status register after disabling the module
spi: spi-fsl-lpspi: Reset FIFO and disable module on transfer abort
spi: spi-fsl-lpspi: Set correct chip-select polarity bit
spi: spi-fsl-lpspi: Fix transmissions when using CONT
spi: microchip-core-qspi: stop checking viability of op->max_freq in supports_op callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Incorrect __BITS_PER_LONG as 64 when compiling the compat vDSO
- Unreachable PLT for ftrace_caller() in a module's .init.text
following past reworking of the module VA range selection
- Memory leak in the ACPI iort_rmr_alloc_sids() after a failed
krealloc_array()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: fix unreachable PLT for ftrace_caller in init_module with CONFIG_DYNAMIC_FTRACE
ACPI/IORT: Fix memory leak in iort_rmr_alloc_sids()
arm64: uapi: Provide correct __BITS_PER_LONG for the compat vDSO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single small audit patch to fix a potential out-of-bounds read
caused by a negative array index when comparing paths"
* tag 'audit-pr-20250905' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix out-of-bounds read in audit_compare_dname_path()
|
|
Otherwise if the nfsd filecache code releases the nfsd_file
immediately, it can trigger the BUG_ON(cred == current->cred) in
__put_cred() when it puts the nfsd_file->nf_file->f-cred.
Fixes: b9f5dd57f4a5 ("nfs/localio: use dedicated workqueues for filesystem read and write")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250807164938.2395136-1-smayhew@redhat.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull smb client fixes from Steve French:
- Fix two potential NULL pointer references
- Two debugging improvements (to help debug recent issues) a new
tracepoint, and minor improvement to DebugData
- Trivial comment cleanup
* tag '6.17-RC4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: prevent NULL pointer dereference in UTF16 conversion
smb: client: show negotiated cipher in DebugData
smb: client: add new tracepoint to trace lease break notification
smb: client: fix spellings in comments
smb: client: Fix NULL pointer dereference in cifs_debug_dirs_proc_show()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ina238: Various value range fixes when writing limit attributes
- mlxreg-fan: Prevent fans from getting stuck at 0 RPM
* tag 'hwmon-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ina238) Correctly clamp power limits
hwmon: (ina238) Correctly clamp shunt voltage limit
hwmon: (ina238) Correctly clamp temperature
hwmon: mlxreg-fan: Prevent fans from getting stuck at 0 RPM
|
|
Commit 15ae0410c37a79 ("btrfs-progs: add error handling for
device_get_partition_size_fd_stat()") in btrfs-progs inadvertently
changed it so that if the BLKGETSIZE64 ioctl on a block device returned
a size of 0, this was no longer seen as an error condition.
Unfortunately this is how disconnected NBD devices behave, meaning that
with btrfs-progs 6.16 it's now possible to add a device you can't
remove:
# btrfs device add /dev/nbd0 /root/temp
# btrfs device remove /dev/nbd0 /root/temp
ERROR: error removing device '/dev/nbd0': Invalid argument
This check should always have been done kernel-side anyway, so add a
check in btrfs_init_new_device() that the new device doesn't have a size
less than BTRFS_DEVICE_RANGE_RESERVED (i.e. 1 MB).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix GPIO submenu regression in Kconfig
- fix make clean under tools/gpio/
* tag 'gpio-fixes-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
tools: gpio: remove the include directory on make clean
gpio: fix GPIO submenu in Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- acer-wmi: Stop using ACPI bitmap for platform profile choices
- amd/hfi: Fix pcct_tbl leak
- amd/pmc: Add TUXEDO IB Pro Gen10 AMD to spurious 8042 quirks
- asus-wmi:
- Fix registration races
- Fix ROG button mapping, tablet mode on ASUS ROG Z13
- Support more keys on ExpertBook B9
- hp-wmi: Add support for Fn+P hotkey
- intel/pmc: Add Bartlett Lake support
- intel/power-domains: Use topology_logical_package_id() for package ID
* tag 'platform-drivers-x86-v6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: power-domains: Use topology_logical_package_id() for package ID
platform/x86: acer-wmi: Stop using ACPI bitmap for platform profile choices
platform/x86: hp-wmi: Add support for Fn+P hotkey
platform/x86/intel/pmc: Add Bartlett Lake support to intel_pmc_core
platform/x86: asus-wmi: Fix racy registrations
platform/x86/amd/pmc: Add TUXEDO IB Pro Gen10 AMD to spurious 8042 quirks list
platform/x86: asus-wmi: map more keys on ExpertBook B9
platform/x86: asus-wmi: Fix ROG button mapping, tablet mode on ASUS ROG Z13
platform/x86: asus-wmi: Remove extra keys from ignore_key_wlan quirk
platform/x86/amd: hfi: Fix pcct_tbl leak in amd_hfi_metadata_parser()
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith
- Fix protection information ref tag for device side gen/strip
(Christoph)
- MD pull request via Yu
- fix data loss for writemostly in raid1 (Yu Kuai)
- fix potentional data loss by skipping recovery (Li Nan)
* tag 'block-6.17-20250905' of git://git.kernel.dk/linux:
md: prevent incorrect update of resync/recovery offset
md/raid1: fix data lost for writemostly rdev
nvme: fix PI insert on write
|
|
This is an update to reflect reality, not a signal of any seismic
change. Dave Sterba has been the acting maintainer for almost a decade,
I've simply been here as a backstop in case he gets hit by a bus. The
fact is we have a strong and thriving community with any number of more
active developers that can take on that role if it's necessary. I'm
exceedingly happy and proud of the work that Dave has done in keeping us
all in line, and know that if further changes need to be made it'll be
with the development community we've built throughout the lifetime of
btrfs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
CONFIG_DYNAMIC_FTRACE
On arm64, it has been possible for a module's sections to be placed more
than 128M away from each other since commit:
commit 3e35d303ab7d ("arm64: module: rework module VA range selection")
Due to this, an ftrace callsite in a module's .init.text section can be
out of branch range for the module's ftrace PLT entry (in the module's
.text section). Any attempt to enable tracing of that callsite will
result in a BRK being patched into the callsite, resulting in a fatal
exception when the callsite is later executed.
Fix this by adding an additional trampoline for .init.text, which will
be within range.
No additional trampolines are necessary due to the way a given
module's executable sections are packed together. Any executable
section beginning with ".init" will be placed in MOD_INIT_TEXT,
and any other executable section, including those beginning with ".exit",
will be placed in MOD_TEXT.
Fixes: 3e35d303ab7d ("arm64: module: rework module VA range selection")
Cc: <stable@vger.kernel.org> # 6.5.x
Signed-off-by: panfan <panfan@qti.qualcomm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250905032236.3220885-1-panfan@qti.qualcomm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes roundup, nouveau has two fixes for fence/irq racing
problems that should fix a bunch of instability in userspace.
Otherwise amdgpu along with some single fixes to bridge, xe, ivpu.
Looks about usual for this time in the release.
scheduler:
- fix race in unschedulable tracepoint
bridge:
- ti-sn65dsi86: fix REFCLK setting
xe:
- Fix incorrect migration of backed-up object to VRAM
amdgpu:
- UserQ fixes
- MES 11 fix
- eDP/LVDS fix
- Fix non-DC audio clean up
- Fix duplicate cursor issue
- Fix error path in PSP init
nouveau:
- fix nonstall interrupt handling
- fix race on fence vs irq emission
- update MAINTAINERS entry
ivpu:
- prevent recovery work during device remove"
* tag 'drm-fixes-2025-09-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/amd/amdgpu: Fix missing error return on kzalloc failure
drm/bridge: ti-sn65dsi86: fix REFCLK setting
MAINTAINERS: Update git entry for nouveau
drm/xe: Fix incorrect migration of backed-up object to VRAM
drm/sched: Fix racy access to drm_sched_entity.dependency
accel/ivpu: Prevent recovery work from being queued during device removal
nouveau: Membar before between semaphore writes and the interrupt
nouveau: fix disabling the nonstall irq due to storm code
drm/amd/display: Clear the CUR_ENABLE register on DCN314 w/out DPP PG
drm/amdgpu: drop hw access in non-DC audio fini
drm/amd: Re-enable common modes for eDP and LVDS
drm/amdgpu/mes11: make MES_MISC_OP_CHANGE_CONFIG failure non-fatal
drm/amdgpu/sdma: bump firmware version checks for user queue support
|
|
Fix the W25N01JW's oob_layout according to the datasheet [1]
[1] https://www.winbond.com/hq/product/code-storage-flash-memory/qspinand-flash/?__locale=en&partNo=W25N01JW
Fixes: 6a804fb72de5 ("mtd: spinand: winbond: add support for serial NAND flash")
Cc: Sridharan S N <quic_sridsn@quicinc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
"Fix a regression caused by my commits that reimplemented the sha1,
sha256, and sha512 crypto_shash algorithms on top of the library API.
Specifically, the export_core and import_core methods stopped being
supported, which broke some hardware offload drivers (such as qat)
that recently started depending on these for fallback functionality.
Later I'd like to make these drivers just use the library API for
their fallback. Then these methods won't be needed anymore. But for
now, this fixes the regression for 6.17"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: sha512 - Implement export_core() and import_core()
crypto: sha256 - Implement export_core() and import_core()
crypto: sha1 - Implement export_core() and import_core()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull PCMCIA fixes and cleanups from Dominik Brodowski:
"A number of minor PCMCIA bugfixes and cleanups, including the removal
of unused code paths"
[ Dominik suggested this might be 6.18 material, but having looked
through this, it looks appropriate early: minor trivial fixes and then
one slightly bigger patch that removes dead code - Linus ]
* tag 'pcmcia-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: Add error handling for add_interval() in do_validate_mem()
pcmcia: cs: Remove unused pcmcia_get_socket_by_nr
pcmcia: omap: Add missing check for platform_get_resource
pcmcia: Use str_off_on() and str_yes_no() helpers
pcmcia: remove PCCARD_IODYN
pcmcia: ds: Emphasize "really" epizeuxis
pcmcia: Fix a NULL pointer dereference in __iodyn_find_io_region()
pcmcia: omap_cf: Mark driver struct with __refdata to prevent section mismatch
|
|
The commit ced17ee32a99 ("Revert "virtio: reject shm region if length is zero"")
exposes the following DAX page fault bug (this fix the failure that getting shm
region alway returns false because of zero length):
The commit 21aa65bf82a7 ("mm: remove callers of pfn_t functionality") handles
the DAX physical page address incorrectly: the removed macro 'phys_to_pfn_t()'
should be replaced with 'PHYS_PFN()'.
[ 1.390321] BUG: unable to handle page fault for address: ffffd3fb40000008
[ 1.390875] #PF: supervisor read access in kernel mode
[ 1.391257] #PF: error_code(0x0000) - not-present page
[ 1.391509] PGD 0 P4D 0
[ 1.391626] Oops: Oops: 0000 [#1] SMP NOPTI
[ 1.391806] CPU: 6 UID: 1000 PID: 162 Comm: weston Not tainted 6.17.0-rc3-WSL2-STABLE #2 PREEMPT(none)
[ 1.392361] RIP: 0010:dax_to_folio+0x14/0x60
[ 1.392653] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff
[ 1.393727] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086
[ 1.394003] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000
[ 1.394524] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000
[ 1.394967] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000
[ 1.395400] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000
[ 1.395806] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000
[ 1.396268] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000
[ 1.396715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.397100] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0
[ 1.397518] Call Trace:
[ 1.397663] <TASK>
[ 1.397900] dax_insert_entry+0x13b/0x390
[ 1.398179] dax_fault_iter+0x2a5/0x6c0
[ 1.398443] dax_iomap_pte_fault+0x193/0x3c0
[ 1.398750] __fuse_dax_fault+0x8b/0x270
[ 1.398997] ? vm_mmap_pgoff+0x161/0x210
[ 1.399175] __do_fault+0x30/0x180
[ 1.399360] do_fault+0xc4/0x550
[ 1.399547] __handle_mm_fault+0x8e3/0xf50
[ 1.399731] ? do_syscall_64+0x72/0x1e0
[ 1.399958] handle_mm_fault+0x192/0x2f0
[ 1.400204] do_user_addr_fault+0x20e/0x700
[ 1.400418] exc_page_fault+0x66/0x150
[ 1.400602] asm_exc_page_fault+0x26/0x30
[ 1.400831] RIP: 0033:0x72596d1bf703
[ 1.401076] Code: 31 f6 45 31 e4 48 8d 15 b3 73 00 00 e8 06 03 00 00 8b 83 68 01 00 00 e9 8e fa ff ff 0f 1f 00 48 8b 44 24 08 4c 89 ee 48 89 df <c7> 00 21 43 34 12 e8 72 09 00 00 e9 6a fa ff ff 0f 1f 44 00 00 e8
[ 1.402172] RSP: 002b:00007ffc350f6dc0 EFLAGS: 00010202
[ 1.402488] RAX: 0000725970e94000 RBX: 00005b7c642c2560 RCX: 0000725970d359a7
[ 1.402898] RDX: 0000000000000003 RSI: 00007ffc350f6dc0 RDI: 00005b7c642c2560
[ 1.403284] RBP: 00007ffc350f6e90 R08: 000000000000000d R09: 0000000000000000
[ 1.403634] R10: 00007ffc350f6dd8 R11: 0000000000000246 R12: 0000000000000001
[ 1.404078] R13: 00007ffc350f6dc0 R14: 0000725970e29ce0 R15: 0000000000000003
[ 1.404450] </TASK>
[ 1.404570] Modules linked in:
[ 1.404821] CR2: ffffd3fb40000008
[ 1.405029] ---[ end trace 0000000000000000 ]---
[ 1.405323] RIP: 0010:dax_to_folio+0x14/0x60
[ 1.405556] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff
[ 1.406639] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086
[ 1.406910] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000
[ 1.407379] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000
[ 1.407800] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000
[ 1.408246] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000
[ 1.408666] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000
[ 1.409170] FS: 000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000
[ 1.409608] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.409977] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0
[ 1.410437] Kernel panic - not syncing: Fatal exception
[ 1.410857] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Fixes: 21aa65bf82a7 ("mm: remove callers of pfn_t functionality")
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Link: https://lore.kernel.org/20250904120339.972-1-haiyuewa@163.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into block-6.17
Pull MD fixes from Yu:
"- fix data loss for writemostly in raid1, by Yu Kuai;
- fix potentional data lost by skipping recovery, by Li Nan;"
* tag 'md-6.17-20250905' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md: prevent incorrect update of resync/recovery offset
md/raid1: fix data lost for writemostly rdev
|
|
Multiple DRM Rust drivers (e.g. nova-core, nova-drm, Tyr, rvkms) are in
development, with at least Nova and (soon) Tyr already upstream. Having a
shared tree will ease and accelerate development, since all drivers can
consume new infrastructure in the same release cycle.
This includes infrastructure shared with other subsystem trees (e.g. Rust
or driver-core). By consolidating in drm-rust, we avoid adding extra
burden to drm-misc maintainers, e.g. dealing with cross-tree topic
branches.
The drm-misc tree is not a good fit for this stage of development, since
its documented scope is small drivers with occasional large series.
Rust drivers in development upstream, however, regularly involve large
patch series, new infrastructure, and shared topic branches, which may
not align well with drm-misc at this stage.
The drm-rust tree may not be a permanent solution. Once the core Rust,
DRM, and KMS infrastructure have stabilized, drivers and infrastructure
changes are expected to transition into drm-misc or standalone driver
trees respectively. Until then, drm-rust provides a dedicated place to
coordinate development without disrupting existing workflows too much.
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Janne Grunau <j@jannau.net>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250901202850.208116-1-dakr@kernel.org
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
James Clark caught that the BUILD_NONDISTRO=1 build with libbfd was
broken due to an update to the read_build_id function adding a
blocking argument. Add support for this argument by first opening the
file blocking or non-blocking, then switching from bfd_openr to
bfd_fdopenr and passing the opened fd. bfd_fdopenr closes the fd on
error and when bfd_close are called.
Reported-by: James Clark <james.clark@linaro.org>
Closes: https://lore.kernel.org/lkml/20250903-james-perf-read-build-id-fix-v1-2-6a694d0a980f@linaro.org/
Fixes: 2c369d91d093 ("perf symbol: Add blocking argument to filename__read_build_id")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250904161731.1193729-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
commit edf2cadf01e8f ("perf test: add test for BPF metadata collection")
fails consistently on the version string check. The perf version
string on some of the constant integration test machines contains
characters with special meaning in grep's extended regular expression
matching algorithm. The output of perf version is:
# perf version
perf version 6.17.0-20250814.rc1.git20.24ea63ea3877.63.fc42.s390x+git
#
and the '+' character has special meaning in egrep command.
Also the use of egrep is deprecated.
Change the perf version string check to fixed character matching
and get rid of egrep's warning being deprecated. Use grep -F instead.
Output before:
# perf test -F 102
Checking BPF metadata collection
egrep: warning: egrep is obsolescent; using grep -E
Basic BPF metadata test [Failed invalid output]
102: BPF metadata collection test : FAILED!
#
Output after:
# perf test -F 102
Checking BPF metadata collection
Basic BPF metadata test [Success]
102: BPF metadata collection test : Ok
#
Fixes: edf2cadf01e8f ("perf test: add test for BPF metadata collection")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Link: https://lore.kernel.org/r/20250822122540.4104658-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Pull NVMe fix from Keith:
"nvme fixes for 6.17
- Fix protection information ref tag for device side gen/strip
(Christoph)"
* tag 'nvme-6.17-2025-09-04' of git://git.infradead.org/nvme:
nvme: fix PI insert on write
|
|
The cppc_ffh_csr_read() and cppc_ffh_csr_write() returns Linux error
code in "data->ret.error" so cpc_read_ffh() and cpc_write_ffh() must
not use sbi_err_map_linux_errno() for FFH_CPPC_CSR.
Fixes: 30f3ffbee86b ("ACPI: RISC-V: Add CPPC driver")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.dev>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250818143600.894385-2-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
When building with CONFIG_CMODEL_MEDLOW and CONFIG_LTO_CLANG, there is a
series of errors due to some files being unconditionally compiled with
'-mcmodel=medany', mismatching with the rest of the kernel built with
'-mcmodel=medlow':
ld.lld: error: Function Import: link error: linking module flags 'Code Model': IDs have conflicting values: 'i32 3' from vmlinux.a(init.o at 899908), and 'i32 1' from vmlinux.a(net-traces.o at 1014628)
Only allow LTO to be performed when CONFIG_CMODEL_MEDANY is enabled to
ensure there will be no code model mismatch errors. An alternative
solution would be disabling LTO for the files with a different code
model than the main kernel like some specialized areas of the kernel do
but doing that for individual files is not as sustainable than
forbidding the combination altogether.
Cc: stable@vger.kernel.org
Fixes: 021d23428bdb ("RISC-V: build: Allow LTO to be selected")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506290255.KBVM83vZ-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250710-riscv-restrict-lto-to-medany-v1-1-b1dac9871ecf@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.17-2025-09-03:
amdgpu:
- UserQ fixes
- MES 11 fix
- eDP/LVDS fix
- Fix non-DC audio clean up
- Fix duplicate cursor issue
- Fix error path in PSP init
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250903221656.251254-1-alexander.deucher@amd.com
|
|
Now when SRIOV is enabled, PF with multiple queues can only receive
all packets on queue 0. This is caused by an incorrect flag judgement,
which prevents RSS from being enabled.
In fact, RSS is supported for the functions when SRIOV is enabled.
Remove the flag judgement to fix it.
Fixes: c52d4b898901 ("net: libwx: Redesign flow when sriov is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/A3B7449A08A044D0+20250904024322.87145-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and Bluetooth.
We're reverting the removal of a Sundance driver, a user has appeared.
This makes the PR rather large in terms of LoC.
There's a conspicuous absence of real, user-reported 6.17 issues.
Slightly worried that the summer distracted people from testing.
Previous releases - regressions:
- ax25: properly unshare skbs in ax25_kiss_rcv()
Previous releases - always broken:
- phylink: disable autoneg for interfaces that have no inband, fix
regression on pcs-lynx (NXP LS1088)
- vxlan: fix null-deref when using nexthop objects
- batman-adv: fix OOB read/write in network-coding decode
- icmp: icmp_ndo_send: fix reversing address translation for replies
- tcp: fix socket ref leak in TCP-AO failure handling for IPv6
- mctp:
- mctp_fraq_queue should take ownership of passed skb
- usb: initialise mac header in RX path, avoid WARN
- wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz,
respect device limitations
- wifi: wilc1000: avoid buffer overflow in WID string configuration
- wifi: mt76:
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- fix multiple wcid linked list corruption issues
- mt7921: don't disconnect when AP requests switch to a channel
which requires radar detection
- mt7925u: use connac3 tx aggr check in tx complete
- wifi: intel:
- improve validation of ACPI DSM data
- cfg: restore some 1000 series configs
- wifi: ath:
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability (multi-link EMLSR)
- eth: intel:
- ice: fix races in "low latency" firmware interface for Tx timestamps
- idpf: set mac type when adding and removing MAC filters
- i40e: remove racy read access to some debugfs files
Misc:
- Revert "eth: remove the DLink/Sundance (ST201) driver"
- netfilter: conntrack: helper: Replace -EEXIST by -EBUSY, avoid
confusing modprobe"
* tag 'net-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
phy: mscc: Stop taking ts_lock for tx_queue and use its own lock
selftest: net: Fix weird setsockopt() in bind_bhash.c.
MAINTAINERS: add Sabrina to TLS maintainers
gve: update MAINTAINERS
ppp: fix memory leak in pad_compress_skb
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
net: atm: fix memory leak in atm_register_sysfs when device_register fail
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
ax25: properly unshare skbs in ax25_kiss_rcv()
mctp: return -ENOPROTOOPT for unknown getsockopt options
net/smc: Remove validation of reserved bits in CLC Decline message
ipv4: Fix NULL vs error pointer check in inet_blackhole_dev_init()
net: thunder_bgx: decrement cleanup index before use
net: thunder_bgx: add a missing of_node_put
net: phylink: move PHY interrupt request to non-fail path
net: lockless sock_i_ino()
tools: ynl-gen: fix nested array counting
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Stable fix to make slub_debug code not access invalid pointers in the
process of reporting issues (Li Qiong)
- Stable fix to make object tracking pass gfp flags to stackdepot to
avoid deadlock in contexts that can't even wake up kswapd due to e.g.
timers debugging enabled (yangshiguang)
* tag 'slab-for-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: slub: avoid wake up kswapd in set_track_prepare
mm/slub: avoid accessing metadata when pointer is invalid in object_err()
|
|
There can be a NULL pointer dereference bug here. NULL is passed to
__cifs_sfu_make_node without checks, which passes it unchecked to
cifs_strndup_to_utf16, which in turn passes it to
cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash.
This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and
returns NULL early to prevent dereferencing NULL pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE
Signed-off-by: Makar Semyonov <m.semenov@tssltd.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In md_do_sync(), when md_sync_action returns ACTION_FROZEN, subsequent
call to md_sync_position() will return MaxSector. This causes
'curr_resync' (and later 'recovery_offset') to be set to MaxSector too,
which incorrectly signals that recovery/resync has completed, even though
disk data has not actually been updated.
To fix this issue, skip updating any offset values when the sync action
is FROZEN. The same holds true for IDLE.
Fixes: 7d9f107a4e94 ("md: use new helpers in md_do_sync()")
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250904073452.3408516-1-linan666@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
