| Age | Commit message (Collapse) | Author |
|---|
|
Replaced hardcoded value 16 with SMB2_NTLMV2_SESSKEY_SIZE
in the auth_key definition and memcpy call.
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replaced hardcoded length with sizeof(flags_string).
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change the pos field in struct cached_dirents from int to loff_t
to support large directory offsets. This avoids overflow and
matches kernel conventions for directory positions.
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Under low-memory conditions, close_all_cached_dirs() can't move the
dentries to a separate list to dput() them once the locks are dropped.
This will result in a "Dentry still in use" error, so add an error
message that makes it clear this is what happened:
[ 495.281119] CIFS: VFS: \\otters.example.com\share Out of memory while dropping dentries
[ 495.281595] ------------[ cut here ]------------
[ 495.281887] BUG: Dentry ffff888115531138{i=78,n=/} still in use (2) [unmount of cifs cifs]
[ 495.282391] WARNING: CPU: 1 PID: 2329 at fs/dcache.c:1536 umount_check+0xc8/0xf0
Also, bail out of looping through all tcons as soon as a single
allocation fails, since we're already in trouble, and kmalloc() attempts
for subseqeuent tcons are likely to fail just like the first one did.
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Acked-by: Bharath SM <bharathsm@microsoft.com>
Suggested-by: Ruben Devos <rdevos@oxya.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix cifs_prepare_write() to negotiate the wsize if it is unset.
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This fixes the following problem:
[ 749.901015] [ T8673] run fstests cifs/001 at 2025-06-17 09:40:30
[ 750.346409] [ T9870] ==================================================================
[ 750.346814] [ T9870] BUG: KASAN: slab-out-of-bounds in smb_set_sge+0x2cc/0x3b0 [cifs]
[ 750.347330] [ T9870] Write of size 8 at addr ffff888011082890 by task xfs_io/9870
[ 750.347705] [ T9870]
[ 750.348077] [ T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Not tainted 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary)
[ 750.348082] [ T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 750.348085] [ T9870] Call Trace:
[ 750.348086] [ T9870] <TASK>
[ 750.348088] [ T9870] dump_stack_lvl+0x76/0xa0
[ 750.348106] [ T9870] print_report+0xd1/0x640
[ 750.348116] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 750.348120] [ T9870] ? kasan_complete_mode_report_info+0x26/0x210
[ 750.348124] [ T9870] kasan_report+0xe7/0x130
[ 750.348128] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs]
[ 750.348262] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs]
[ 750.348377] [ T9870] __asan_report_store8_noabort+0x17/0x30
[ 750.348381] [ T9870] smb_set_sge+0x2cc/0x3b0 [cifs]
[ 750.348496] [ T9870] smbd_post_send_iter+0x1990/0x3070 [cifs]
[ 750.348625] [ T9870] ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs]
[ 750.348741] [ T9870] ? update_stack_state+0x2a0/0x670
[ 750.348749] [ T9870] ? cifs_flush+0x153/0x320 [cifs]
[ 750.348870] [ T9870] ? cifs_flush+0x153/0x320 [cifs]
[ 750.348990] [ T9870] ? update_stack_state+0x2a0/0x670
[ 750.348995] [ T9870] smbd_send+0x58c/0x9c0 [cifs]
[ 750.349117] [ T9870] ? __pfx_smbd_send+0x10/0x10 [cifs]
[ 750.349231] [ T9870] ? unwind_get_return_address+0x65/0xb0
[ 750.349235] [ T9870] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 750.349242] [ T9870] ? arch_stack_walk+0xa7/0x100
[ 750.349250] [ T9870] ? stack_trace_save+0x92/0xd0
[ 750.349254] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs]
[ 750.349374] [ T9870] ? kernel_text_address+0x173/0x190
[ 750.349379] [ T9870] ? kasan_save_stack+0x39/0x70
[ 750.349382] [ T9870] ? kasan_save_track+0x18/0x70
[ 750.349385] [ T9870] ? __kasan_slab_alloc+0x9d/0xa0
[ 750.349389] [ T9870] ? __pfx___smb_send_rqst+0x10/0x10 [cifs]
[ 750.349508] [ T9870] ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs]
[ 750.349626] [ T9870] ? cifs_call_async+0x277/0xb00 [cifs]
[ 750.349746] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs]
[ 750.349867] [ T9870] ? netfs_do_issue_write+0xc2/0x340 [netfs]
[ 750.349900] [ T9870] ? netfs_advance_write+0x45b/0x1270 [netfs]
[ 750.349929] [ T9870] ? netfs_write_folio+0xd6c/0x1be0 [netfs]
[ 750.349958] [ T9870] ? netfs_writepages+0x2e9/0xa80 [netfs]
[ 750.349987] [ T9870] ? do_writepages+0x21f/0x590
[ 750.349993] [ T9870] ? filemap_fdatawrite_wbc+0xe1/0x140
[ 750.349997] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 750.350002] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs]
[ 750.350131] [ T9870] ? __pfx_smb_send_rqst+0x10/0x10 [cifs]
[ 750.350255] [ T9870] ? local_clock_noinstr+0xe/0xd0
[ 750.350261] [ T9870] ? kasan_save_alloc_info+0x37/0x60
[ 750.350268] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.350271] [ T9870] ? _raw_spin_lock+0x81/0xf0
[ 750.350275] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10
[ 750.350278] [ T9870] ? smb2_setup_async_request+0x293/0x580 [cifs]
[ 750.350398] [ T9870] cifs_call_async+0x477/0xb00 [cifs]
[ 750.350518] [ T9870] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs]
[ 750.350636] [ T9870] ? __pfx_cifs_call_async+0x10/0x10 [cifs]
[ 750.350756] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10
[ 750.350760] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.350763] [ T9870] ? __smb2_plain_req_init+0x933/0x1090 [cifs]
[ 750.350891] [ T9870] smb2_async_writev+0x15ff/0x2460 [cifs]
[ 750.351008] [ T9870] ? sched_clock_noinstr+0x9/0x10
[ 750.351012] [ T9870] ? local_clock_noinstr+0xe/0xd0
[ 750.351018] [ T9870] ? __pfx_smb2_async_writev+0x10/0x10 [cifs]
[ 750.351144] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 750.351150] [ T9870] ? _raw_spin_unlock+0xe/0x40
[ 750.351154] [ T9870] ? cifs_pick_channel+0x242/0x370 [cifs]
[ 750.351275] [ T9870] cifs_issue_write+0x256/0x610 [cifs]
[ 750.351554] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs]
[ 750.351677] [ T9870] netfs_do_issue_write+0xc2/0x340 [netfs]
[ 750.351710] [ T9870] netfs_advance_write+0x45b/0x1270 [netfs]
[ 750.351740] [ T9870] ? rolling_buffer_append+0x12d/0x440 [netfs]
[ 750.351769] [ T9870] netfs_write_folio+0xd6c/0x1be0 [netfs]
[ 750.351798] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.351804] [ T9870] netfs_writepages+0x2e9/0xa80 [netfs]
[ 750.351835] [ T9870] ? __pfx_netfs_writepages+0x10/0x10 [netfs]
[ 750.351864] [ T9870] ? exit_files+0xab/0xe0
[ 750.351867] [ T9870] ? do_exit+0x148f/0x2980
[ 750.351871] [ T9870] ? do_group_exit+0xb5/0x250
[ 750.351874] [ T9870] ? arch_do_signal_or_restart+0x92/0x630
[ 750.351879] [ T9870] ? exit_to_user_mode_loop+0x98/0x170
[ 750.351882] [ T9870] ? do_syscall_64+0x2cf/0xd80
[ 750.351886] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 750.351890] [ T9870] do_writepages+0x21f/0x590
[ 750.351894] [ T9870] ? __pfx_do_writepages+0x10/0x10
[ 750.351897] [ T9870] filemap_fdatawrite_wbc+0xe1/0x140
[ 750.351901] [ T9870] __filemap_fdatawrite_range+0xba/0x100
[ 750.351904] [ T9870] ? __pfx___filemap_fdatawrite_range+0x10/0x10
[ 750.351912] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.351916] [ T9870] filemap_write_and_wait_range+0x7d/0xf0
[ 750.351920] [ T9870] cifs_flush+0x153/0x320 [cifs]
[ 750.352042] [ T9870] filp_flush+0x107/0x1a0
[ 750.352046] [ T9870] filp_close+0x14/0x30
[ 750.352049] [ T9870] put_files_struct.part.0+0x126/0x2a0
[ 750.352053] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10
[ 750.352058] [ T9870] exit_files+0xab/0xe0
[ 750.352061] [ T9870] do_exit+0x148f/0x2980
[ 750.352065] [ T9870] ? __pfx_do_exit+0x10/0x10
[ 750.352069] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.352072] [ T9870] ? _raw_spin_lock_irq+0x8a/0xf0
[ 750.352076] [ T9870] do_group_exit+0xb5/0x250
[ 750.352080] [ T9870] get_signal+0x22d3/0x22e0
[ 750.352086] [ T9870] ? __pfx_get_signal+0x10/0x10
[ 750.352089] [ T9870] ? fpregs_assert_state_consistent+0x68/0x100
[ 750.352101] [ T9870] ? folio_add_lru+0xda/0x120
[ 750.352105] [ T9870] arch_do_signal_or_restart+0x92/0x630
[ 750.352109] [ T9870] ? __pfx_arch_do_signal_or_restart+0x10/0x10
[ 750.352115] [ T9870] exit_to_user_mode_loop+0x98/0x170
[ 750.352118] [ T9870] do_syscall_64+0x2cf/0xd80
[ 750.352123] [ T9870] ? __kasan_check_read+0x11/0x20
[ 750.352126] [ T9870] ? count_memcg_events+0x1b4/0x420
[ 750.352132] [ T9870] ? handle_mm_fault+0x148/0x690
[ 750.352136] [ T9870] ? _raw_spin_lock_irq+0x8a/0xf0
[ 750.352140] [ T9870] ? __kasan_check_read+0x11/0x20
[ 750.352143] [ T9870] ? fpregs_assert_state_consistent+0x68/0x100
[ 750.352146] [ T9870] ? irqentry_exit_to_user_mode+0x2e/0x250
[ 750.352151] [ T9870] ? irqentry_exit+0x43/0x50
[ 750.352154] [ T9870] ? exc_page_fault+0x75/0xe0
[ 750.352160] [ T9870] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 750.352163] [ T9870] RIP: 0033:0x7858c94ab6e2
[ 750.352167] [ T9870] Code: Unable to access opcode bytes at 0x7858c94ab6b8.
[ 750.352175] [ T9870] RSP: 002b:00007858c9248ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000022
[ 750.352179] [ T9870] RAX: fffffffffffffdfe RBX: 00007858c92496c0 RCX: 00007858c94ab6e2
[ 750.352182] [ T9870] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 750.352184] [ T9870] RBP: 00007858c9248d10 R08: 0000000000000000 R09: 0000000000000000
[ 750.352185] [ T9870] R10: 0000000000000000 R11: 0000000000000246 R12: fffffffffffffde0
[ 750.352187] [ T9870] R13: 0000000000000020 R14: 0000000000000002 R15: 00007ffc072d2230
[ 750.352191] [ T9870] </TASK>
[ 750.352195] [ T9870]
[ 750.395206] [ T9870] Allocated by task 9870 on cpu 0 at 750.346406s:
[ 750.395523] [ T9870] kasan_save_stack+0x39/0x70
[ 750.395532] [ T9870] kasan_save_track+0x18/0x70
[ 750.395536] [ T9870] kasan_save_alloc_info+0x37/0x60
[ 750.395539] [ T9870] __kasan_slab_alloc+0x9d/0xa0
[ 750.395543] [ T9870] kmem_cache_alloc_noprof+0x13c/0x3f0
[ 750.395548] [ T9870] mempool_alloc_slab+0x15/0x20
[ 750.395553] [ T9870] mempool_alloc_noprof+0x135/0x340
[ 750.395557] [ T9870] smbd_post_send_iter+0x63e/0x3070 [cifs]
[ 750.395694] [ T9870] smbd_send+0x58c/0x9c0 [cifs]
[ 750.395819] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs]
[ 750.395950] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs]
[ 750.396081] [ T9870] cifs_call_async+0x477/0xb00 [cifs]
[ 750.396232] [ T9870] smb2_async_writev+0x15ff/0x2460 [cifs]
[ 750.396359] [ T9870] cifs_issue_write+0x256/0x610 [cifs]
[ 750.396492] [ T9870] netfs_do_issue_write+0xc2/0x340 [netfs]
[ 750.396544] [ T9870] netfs_advance_write+0x45b/0x1270 [netfs]
[ 750.396576] [ T9870] netfs_write_folio+0xd6c/0x1be0 [netfs]
[ 750.396608] [ T9870] netfs_writepages+0x2e9/0xa80 [netfs]
[ 750.396639] [ T9870] do_writepages+0x21f/0x590
[ 750.396643] [ T9870] filemap_fdatawrite_wbc+0xe1/0x140
[ 750.396647] [ T9870] __filemap_fdatawrite_range+0xba/0x100
[ 750.396651] [ T9870] filemap_write_and_wait_range+0x7d/0xf0
[ 750.396656] [ T9870] cifs_flush+0x153/0x320 [cifs]
[ 750.396787] [ T9870] filp_flush+0x107/0x1a0
[ 750.396791] [ T9870] filp_close+0x14/0x30
[ 750.396795] [ T9870] put_files_struct.part.0+0x126/0x2a0
[ 750.396800] [ T9870] exit_files+0xab/0xe0
[ 750.396803] [ T9870] do_exit+0x148f/0x2980
[ 750.396808] [ T9870] do_group_exit+0xb5/0x250
[ 750.396813] [ T9870] get_signal+0x22d3/0x22e0
[ 750.396817] [ T9870] arch_do_signal_or_restart+0x92/0x630
[ 750.396822] [ T9870] exit_to_user_mode_loop+0x98/0x170
[ 750.396827] [ T9870] do_syscall_64+0x2cf/0xd80
[ 750.396832] [ T9870] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 750.396836] [ T9870]
[ 750.397150] [ T9870] The buggy address belongs to the object at ffff888011082800
which belongs to the cache smbd_request_0000000008f3bd7b of size 144
[ 750.397798] [ T9870] The buggy address is located 0 bytes to the right of
allocated 144-byte region [ffff888011082800, ffff888011082890)
[ 750.398469] [ T9870]
[ 750.398800] [ T9870] The buggy address belongs to the physical page:
[ 750.399141] [ T9870] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11082
[ 750.399148] [ T9870] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
[ 750.399155] [ T9870] page_type: f5(slab)
[ 750.399161] [ T9870] raw: 000fffffc0000000 ffff888022d65640 dead000000000122 0000000000000000
[ 750.399165] [ T9870] raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
[ 750.399169] [ T9870] page dumped because: kasan: bad access detected
[ 750.399172] [ T9870]
[ 750.399505] [ T9870] Memory state around the buggy address:
[ 750.399863] [ T9870] ffff888011082780: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 750.400247] [ T9870] ffff888011082800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 750.400618] [ T9870] >ffff888011082880: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 750.400982] [ T9870] ^
[ 750.401370] [ T9870] ffff888011082900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 750.401774] [ T9870] ffff888011082980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 750.402171] [ T9870] ==================================================================
[ 750.402696] [ T9870] Disabling lock debugging due to kernel taint
[ 750.403202] [ T9870] BUG: unable to handle page fault for address: ffff8880110a2000
[ 750.403797] [ T9870] #PF: supervisor write access in kernel mode
[ 750.404204] [ T9870] #PF: error_code(0x0003) - permissions violation
[ 750.404581] [ T9870] PGD 5ce01067 P4D 5ce01067 PUD 5ce02067 PMD 78aa063 PTE 80000000110a2021
[ 750.404969] [ T9870] Oops: Oops: 0003 [#1] SMP KASAN PTI
[ 750.405394] [ T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Tainted: G B 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary)
[ 750.406510] [ T9870] Tainted: [B]=BAD_PAGE
[ 750.406967] [ T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 750.407440] [ T9870] RIP: 0010:smb_set_sge+0x15c/0x3b0 [cifs]
[ 750.408065] [ T9870] Code: 48 83 f8 ff 0f 84 b0 00 00 00 48 ba 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 80 3c 11 00 0f 85 69 01 00 00 49 8d 7c 24 08 <49> 89 04 24 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 0f
[ 750.409283] [ T9870] RSP: 0018:ffffc90005e2e758 EFLAGS: 00010246
[ 750.409803] [ T9870] RAX: ffff888036c53400 RBX: ffffc90005e2e878 RCX: 1ffff11002214400
[ 750.410323] [ T9870] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff8880110a2008
[ 750.411217] [ T9870] RBP: ffffc90005e2e798 R08: 0000000000000001 R09: 0000000000000400
[ 750.411770] [ T9870] R10: ffff888011082800 R11: 0000000000000000 R12: ffff8880110a2000
[ 750.412325] [ T9870] R13: 0000000000000000 R14: ffffc90005e2e888 R15: ffff88801a4b6000
[ 750.412901] [ T9870] FS: 0000000000000000(0000) GS:ffff88812bc68000(0000) knlGS:0000000000000000
[ 750.413477] [ T9870] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 750.414077] [ T9870] CR2: ffff8880110a2000 CR3: 000000005b0a6005 CR4: 00000000000726f0
[ 750.414654] [ T9870] Call Trace:
[ 750.415211] [ T9870] <TASK>
[ 750.415748] [ T9870] smbd_post_send_iter+0x1990/0x3070 [cifs]
[ 750.416449] [ T9870] ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs]
[ 750.417128] [ T9870] ? update_stack_state+0x2a0/0x670
[ 750.417685] [ T9870] ? cifs_flush+0x153/0x320 [cifs]
[ 750.418380] [ T9870] ? cifs_flush+0x153/0x320 [cifs]
[ 750.419055] [ T9870] ? update_stack_state+0x2a0/0x670
[ 750.419624] [ T9870] smbd_send+0x58c/0x9c0 [cifs]
[ 750.420297] [ T9870] ? __pfx_smbd_send+0x10/0x10 [cifs]
[ 750.420936] [ T9870] ? unwind_get_return_address+0x65/0xb0
[ 750.421456] [ T9870] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 750.421954] [ T9870] ? arch_stack_walk+0xa7/0x100
[ 750.422460] [ T9870] ? stack_trace_save+0x92/0xd0
[ 750.422948] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs]
[ 750.423579] [ T9870] ? kernel_text_address+0x173/0x190
[ 750.424056] [ T9870] ? kasan_save_stack+0x39/0x70
[ 750.424813] [ T9870] ? kasan_save_track+0x18/0x70
[ 750.425323] [ T9870] ? __kasan_slab_alloc+0x9d/0xa0
[ 750.425831] [ T9870] ? __pfx___smb_send_rqst+0x10/0x10 [cifs]
[ 750.426548] [ T9870] ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs]
[ 750.427231] [ T9870] ? cifs_call_async+0x277/0xb00 [cifs]
[ 750.427882] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs]
[ 750.428909] [ T9870] ? netfs_do_issue_write+0xc2/0x340 [netfs]
[ 750.429425] [ T9870] ? netfs_advance_write+0x45b/0x1270 [netfs]
[ 750.429882] [ T9870] ? netfs_write_folio+0xd6c/0x1be0 [netfs]
[ 750.430345] [ T9870] ? netfs_writepages+0x2e9/0xa80 [netfs]
[ 750.430809] [ T9870] ? do_writepages+0x21f/0x590
[ 750.431239] [ T9870] ? filemap_fdatawrite_wbc+0xe1/0x140
[ 750.431652] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 750.432041] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs]
[ 750.432586] [ T9870] ? __pfx_smb_send_rqst+0x10/0x10 [cifs]
[ 750.433108] [ T9870] ? local_clock_noinstr+0xe/0xd0
[ 750.433482] [ T9870] ? kasan_save_alloc_info+0x37/0x60
[ 750.433855] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.434214] [ T9870] ? _raw_spin_lock+0x81/0xf0
[ 750.434561] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10
[ 750.434903] [ T9870] ? smb2_setup_async_request+0x293/0x580 [cifs]
[ 750.435394] [ T9870] cifs_call_async+0x477/0xb00 [cifs]
[ 750.435892] [ T9870] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs]
[ 750.436388] [ T9870] ? __pfx_cifs_call_async+0x10/0x10 [cifs]
[ 750.436881] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10
[ 750.437237] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.437579] [ T9870] ? __smb2_plain_req_init+0x933/0x1090 [cifs]
[ 750.438062] [ T9870] smb2_async_writev+0x15ff/0x2460 [cifs]
[ 750.438557] [ T9870] ? sched_clock_noinstr+0x9/0x10
[ 750.438906] [ T9870] ? local_clock_noinstr+0xe/0xd0
[ 750.439293] [ T9870] ? __pfx_smb2_async_writev+0x10/0x10 [cifs]
[ 750.439786] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 750.440143] [ T9870] ? _raw_spin_unlock+0xe/0x40
[ 750.440495] [ T9870] ? cifs_pick_channel+0x242/0x370 [cifs]
[ 750.440989] [ T9870] cifs_issue_write+0x256/0x610 [cifs]
[ 750.441492] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs]
[ 750.441987] [ T9870] netfs_do_issue_write+0xc2/0x340 [netfs]
[ 750.442387] [ T9870] netfs_advance_write+0x45b/0x1270 [netfs]
[ 750.442969] [ T9870] ? rolling_buffer_append+0x12d/0x440 [netfs]
[ 750.443376] [ T9870] netfs_write_folio+0xd6c/0x1be0 [netfs]
[ 750.443768] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.444145] [ T9870] netfs_writepages+0x2e9/0xa80 [netfs]
[ 750.444541] [ T9870] ? __pfx_netfs_writepages+0x10/0x10 [netfs]
[ 750.444936] [ T9870] ? exit_files+0xab/0xe0
[ 750.445312] [ T9870] ? do_exit+0x148f/0x2980
[ 750.445672] [ T9870] ? do_group_exit+0xb5/0x250
[ 750.446028] [ T9870] ? arch_do_signal_or_restart+0x92/0x630
[ 750.446402] [ T9870] ? exit_to_user_mode_loop+0x98/0x170
[ 750.446762] [ T9870] ? do_syscall_64+0x2cf/0xd80
[ 750.447132] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 750.447499] [ T9870] do_writepages+0x21f/0x590
[ 750.447859] [ T9870] ? __pfx_do_writepages+0x10/0x10
[ 750.448236] [ T9870] filemap_fdatawrite_wbc+0xe1/0x140
[ 750.448595] [ T9870] __filemap_fdatawrite_range+0xba/0x100
[ 750.448953] [ T9870] ? __pfx___filemap_fdatawrite_range+0x10/0x10
[ 750.449336] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.449697] [ T9870] filemap_write_and_wait_range+0x7d/0xf0
[ 750.450062] [ T9870] cifs_flush+0x153/0x320 [cifs]
[ 750.450592] [ T9870] filp_flush+0x107/0x1a0
[ 750.450952] [ T9870] filp_close+0x14/0x30
[ 750.451322] [ T9870] put_files_struct.part.0+0x126/0x2a0
[ 750.451678] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10
[ 750.452033] [ T9870] exit_files+0xab/0xe0
[ 750.452401] [ T9870] do_exit+0x148f/0x2980
[ 750.452751] [ T9870] ? __pfx_do_exit+0x10/0x10
[ 750.453109] [ T9870] ? __kasan_check_write+0x14/0x30
[ 750.453459] [ T9870] ? _raw_spin_lock_irq+0x8a/0xf0
[ 750.453787] [ T9870] do_group_exit+0xb5/0x250
[ 750.454082] [ T9870] get_signal+0x22d3/0x22e0
[ 750.454406] [ T9870] ? __pfx_get_signal+0x10/0x10
[ 750.454709] [ T9870] ? fpregs_assert_state_consistent+0x68/0x100
[ 750.455031] [ T9870] ? folio_add_lru+0xda/0x120
[ 750.455347] [ T9870] arch_do_signal_or_restart+0x92/0x630
[ 750.455656] [ T9870] ? __pfx_arch_do_signal_or_restart+0x10/0x10
[ 750.455967] [ T9870] exit_to_user_mode_loop+0x98/0x170
[ 750.456282] [ T9870] do_syscall_64+0x2cf/0xd80
[ 750.456591] [ T9870] ? __kasan_check_read+0x11/0x20
[ 750.456897] [ T9870] ? count_memcg_events+0x1b4/0x420
[ 750.457280] [ T9870] ? handle_mm_fault+0x148/0x690
[ 750.457616] [ T9870] ? _raw_spin_lock_irq+0x8a/0xf0
[ 750.457925] [ T9870] ? __kasan_check_read+0x11/0x20
[ 750.458297] [ T9870] ? fpregs_assert_state_consistent+0x68/0x100
[ 750.458672] [ T9870] ? irqentry_exit_to_user_mode+0x2e/0x250
[ 750.459191] [ T9870] ? irqentry_exit+0x43/0x50
[ 750.459600] [ T9870] ? exc_page_fault+0x75/0xe0
[ 750.460130] [ T9870] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 750.460570] [ T9870] RIP: 0033:0x7858c94ab6e2
[ 750.461206] [ T9870] Code: Unable to access opcode bytes at 0x7858c94ab6b8.
[ 750.461780] [ T9870] RSP: 002b:00007858c9248ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000022
[ 750.462327] [ T9870] RAX: fffffffffffffdfe RBX: 00007858c92496c0 RCX: 00007858c94ab6e2
[ 750.462653] [ T9870] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 750.462969] [ T9870] RBP: 00007858c9248d10 R08: 0000000000000000 R09: 0000000000000000
[ 750.463290] [ T9870] R10: 0000000000000000 R11: 0000000000000246 R12: fffffffffffffde0
[ 750.463640] [ T9870] R13: 0000000000000020 R14: 0000000000000002 R15: 00007ffc072d2230
[ 750.463965] [ T9870] </TASK>
[ 750.464285] [ T9870] Modules linked in: siw ib_uverbs ccm cmac nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm ib_core cifs_md4 netfs softdog vboxsf vboxguest cpuid intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_class intel_pmc_ssram_telemetry intel_vsec polyval_clmulni ghash_clmulni_intel sha1_ssse3 aesni_intel rapl i2c_piix4 i2c_smbus joydev input_leds mac_hid sunrpc binfmt_misc kvm_intel kvm irqbypass sch_fq_codel efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock vmw_vmci dmi_sysfs ip_tables x_tables autofs4 hid_generic vboxvideo usbhid drm_vram_helper psmouse vga16fb vgastate drm_ttm_helper serio_raw hid ahci libahci ttm pata_acpi video wmi [last unloaded: vboxguest]
[ 750.467127] [ T9870] CR2: ffff8880110a2000
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Fixes: c45ebd636c32 ("cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
after fabc4ed200f9, server_unresponsive add a condition to check whether client
need to reconnect depending on server->lstrp. When client failed to reconnect
for some time and abort connection, server->lstrp is updated for the last time.
In the following scene, server->lstrp is too old. This cause next command
failure in re-negotiation rather than waiting for re-negotiation done.
1. mount -t cifs -o username=Everyone,echo_internal=10 //$server_ip/export /mnt
2. ssh $server_ip "echo b > /proc/sysrq-trigger &"
3. ls /mnt
4. sleep 21s
5. ssh $server_ip "service firewalld stop"
6. ls # return EHOSTDOWN
If the interval between 5 and 6 is too small, 6 may trigger sending negotiation
request. Before backgrounding cifsd thread try to receive negotiation response
from server in cifs_readv_from_socket, server_unresponsive may trigger
cifs_reconnect which cause 6 to be failed:
ls thread
----------------
smb2_negotiate
server->tcpStatus = CifsInNegotiate
compound_send_recv
wait_for_compound_request
cifsd thread
----------------
cifs_readv_from_socket
server_unresponsive
server->tcpStatus == CifsInNegotiate && jiffies > server->lstrp + 20s
cifs_reconnect
cifs_abort_connection: mid_state = MID_RETRY_NEEDED
ls thread
----------------
cifs_sync_mid_result return EAGAIN
smb2_negotiate return EHOSTDOWN
Though server->lstrp means last server response time, it is updated in
cifs_abort_connection and cifs_get_tcp_session. We can also update server->lstrp
before switching into CifsInNegotiate state to avoid failure in 6.
Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto")
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: zhangjian <zhangjian496@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull io_uring fix from Jens Axboe:
"A single fix to hopefully wrap up the saga of receive bundles"
* tag 'io_uring-6.16-20250621' of git://git.kernel.dk/linux:
io_uring/net: always use current transfer count for buffer put
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a crash in ACPICA while attempting to evaluate a control method
that expects more arguments than are being passed to it, which was
exposed by a defective firmware update from a prominent OEM on
multiple systems (Rafael Wysocki)"
* tag 'acpi-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Refuse to evaluate a method if arguments are missing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Set up runtime PM even for devices that lack a PM Capability as we
did before 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when
initializing"), which broke resume in some VFIO scenarios (Mario
Limonciello)
- Ignore pciehp Presence Detect Changed events caused by DPC, even if
they occur after a Data Link Layer State Changed event, to fix a VFIO
GPU passthrough regression in v6.13 (Lukas Wunner)
* tag 'pci-v6.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: pciehp: Ignore belated Presence Detect Changed caused by DPC
PCI/PM: Set up runtime PM even for devices without PCI PM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fix from Joel Fernandes:
"We recently got a report of a crash [1] with misuse of call_rcu().
Instead of crashing the kernel, a warning and graceful return is
better:
- rcu: Return early if callback is not specified (Uladzislau Rezki)"
Link: https://lore.kernel.org/all/aEnVuzK7VhGSizWj@pc636/ [1]
* tag 'rcu/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
rcu: Return early if callback is not specified
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix some file descriptor leaks that stand out with recent changes to
'perf list'
- Fix prctl include to fix building 'perf bench futex' hash with musl
libc
- Restrict 'perf test' uniquifying entry to machines with 'uncore_imc'
PMUs
- Document new output fields (op, cache, mem, dtlb, snoop) used with
'perf mem'
- Synchronize kernel header copies
* tag 'perf-tools-fixes-for-v6.16-1-2025-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers x86 cpufeatures: Sync with the kernel sources
perf bench futex: Fix prctl include in musl libc
perf test: Directory file descriptor leak
perf evsel: Missed close() when probing hybrid core PMUs
tools headers: Synchronize linux/bits.h with the kernel sources
tools arch amd ibs: Sync ibs.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers: Syncronize linux/build_bug.h with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync the drm/drm.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync kvm header with the kernel sources
tools headers x86 svm: Sync svm headers with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
tools kvm headers arm64: Update KVM header from the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources to pick FUTEX knob
perf mem: Document new output fields (op, cache, mem, dtlb, snoop)
tools headers: Update the fs headers with the kernel sources
perf test: Restrict uniquifying test to machines with 'uncore_imc'
|
|
I'm retiring and have already had my name removed from MAINTAINERS.
A couple of folks kindly suggested I should have an entry here.
Signed-off-by: Shannon Nelson <sln@onemain.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250619211607.1244217-1-sln@onemain.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip.
0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9071 Rev= 5.15
S: Manufacturer=SIMCOM
S: Product=SDXBAAGHA-IDP _SN:D744C4C5
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=none
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/tencent_21D781FAA4969FEACA6ABB460362B52C9409@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"The main fix that really needs to get in is the revert of the patch
adding the new mtd_master class, because it entirely fails the
partitioning if a specific Kconfig option is set. We need to think how
to handle that differently, so let's revert it as we need to get back
to the pen and paper situation again.
Otherwise the definition of some Winbond SPI NAND chips are receiving
some fixes (geometry and maximum frequency, mostly).
And finally a small memory leak gets also fixed"
* tag 'mtd/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: fix memory leak of ECC engine conf
mtd: spinand: winbond: Prevent unsupported frequencies on dual/quad I/O variants
mtd: spinand: winbond: Increase maximum frequency on an octal operation
mtd: spinand: winbond: Fix W35N number of planes/LUN
Revert "mtd: core: always create master device"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small and obvious driver fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: elx: efct: Fix memory leak in efct_hw_parse_filter()
scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port()
|
|
The '#reset-cells' property is permitted for some of the MT8188
clock controllers, but not listed as a valid property.
Fixes: 9a5cd59640ac ("dt-bindings: clock: mediatek: Add SMI LARBs reset for MT8188")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250516-dtb-check-mt8188-v2-1-fb60bef1b8e1@collabora.com
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
When the compiler chooses to not inline sha256_choose_blocks() in
the purgatory code, it fails to link against the missing CPU
specific version:
x86_64-linux-ld: arch/x86/purgatory/purgatory.ro: in function `sha256_choose_blocks.part.0':
sha256.c:(.text+0x6a6): undefined reference to `irq_fpu_usable'
sha256.c:(.text+0x6c7): undefined reference to `sha256_blocks_arch'
sha256.c:(.text+0x6cc): undefined reference to `sha256_blocks_simd'
Mark this function as __always_inline to prevent this, same as sha256_finup().
Fixes: 5b90a779bc54 ("crypto: lib/sha256 - Add helpers for block-based shash")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620191952.1867578-1-arnd@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
ath79_misc_irq_init() was defined but unused since commit 51fa4f8912c0
("MIPS: ath79: drop legacy IRQ code"), so it's time to drop it.
The build also warns about a missing prototype of get_c0_perfcount_int().
Remove the stale leftover function and add the missing include.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/OSBPR01MB167032D2017645200787AAEBBC72A@OSBPR01MB1670.jpnprd01.prod.outlook.com
|
|
Currently the call_rcu() API does not check whether a callback
pointer is NULL. If NULL is passed, rcu_core() will try to invoke
it, resulting in NULL pointer dereference and a kernel crash.
To prevent this and improve debuggability, this patch adds a check
for NULL and emits a kernel stack trace to help identify a faulty
caller.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
Allow userspace to advertise TDG.VP.VMCALL subfunctions that the
kernel also supports. For each output register of GetTdVmCallInfo's
leaf 1, add two fields to KVM_TDX_CAPABILITIES: one for kernel-supported
TDVMCALLs (userspace can set those blindly) and one for user-supported
TDVMCALLs (userspace can set those if it knows how to handle them).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Exit to userspace for TDG.VP.VMCALL<GetTdVmCallInfo> via KVM_EXIT_TDX,
to allow userspace to provide information about the support of
TDVMCALLs when r12 is 1 for the TDVMCALLs beyond the GHCI base API.
GHCI spec defines the GHCI base TDVMCALLs: <GetTdVmCallInfo>, <MapGPA>,
<ReportFatalError>, <Instruction.CPUID>, <#VE.RequestMMIO>,
<Instruction.HLT>, <Instruction.IO>, <Instruction.RDMSR> and
<Instruction.WRMSR>. They must be supported by VMM to support TDX guests.
For GetTdVmCallInfo
- When leaf (r12) to enumerate TDVMCALL functionality is set to 0,
successful execution indicates all GHCI base TDVMCALLs listed above are
supported.
Update the KVM TDX document with the set of the GHCI base APIs.
- When leaf (r12) to enumerate TDVMCALL functionality is set to 1, it
indicates the TDX guest is querying the supported TDVMCALLs beyond
the GHCI base TDVMCALLs.
Exit to userspace to let userspace set the TDVMCALL sub-function bit(s)
accordingly to the leaf outputs. KVM could set the TDVMCALL bit(s)
supported by itself when the TDVMCALLs don't need support from userspace
after returning from userspace and before entering guest. Currently, no
such TDVMCALLs implemented, KVM just sets the values returned from
userspace.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle TDVMCALL for GetQuote to generate a TD-Quote.
GetQuote is a doorbell-like interface used by TDX guests to request VMM
to generate a TD-Quote signed by a service hosting TD-Quoting Enclave
operating on the host. A TDX guest passes a TD Report (TDREPORT_STRUCT) in
a shared-memory area as parameter. Host VMM can access it and queue the
operation for a service hosting TD-Quoting enclave. When completed, the
Quote is returned via the same shared-memory area.
KVM only checks the GPA from the TDX guest has the shared-bit set and drops
the shared-bit before exiting to userspace to avoid bleeding the shared-bit
into KVM's exit ABI. KVM forwards the request to userspace VMM (e.g. QEMU)
and userspace VMM queues the operation asynchronously. KVM sets the return
code according to the 'ret' field set by userspace to notify the TDX guest
whether the request has been queued successfully or not. When the request
has been queued successfully, the TDX guest can poll the status field in
the shared-memory area to check whether the Quote generation is completed
or not. When completed, the generated Quote is returned via the same
buffer.
Add KVM_EXIT_TDX as a new exit reason to userspace. Userspace is
required to handle the KVM exit reason as the initial support for TDX,
by reentering KVM to ensure that the TDVMCALL is complete. While at it,
add a note that KVM_EXIT_HYPERCALL also requires reentry with KVM_RUN.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the new TDVMCALL status code TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED and
return it for unimplemented TDVMCALL subfunctions.
Returning TDVMCALL_STATUS_INVALID_OPERAND when a subfunction is not
implemented is vague because TDX guests can't tell the error is due to
the subfunction is not supported or an invalid input of the subfunction.
New GHCI spec adds TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED to avoid the
ambiguity. Use it instead of TDVMCALL_STATUS_INVALID_OPERAND.
Before the change, for common guest implementations, when a TDX guest
receives TDVMCALL_STATUS_INVALID_OPERAND, it has two cases:
1. Some operand is invalid. It could change the operand to another value
retry.
2. The subfunction is not supported.
For case 1, an invalid operand usually means the guest implementation bug.
Since the TDX guest can't tell which case is, the best practice for
handling TDVMCALL_STATUS_INVALID_OPERAND is stopping calling such leaf,
treating the failure as fatal if the TDVMCALL is essential or ignoring
it if the TDVMCALL is optional.
With this change, TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED could be sent to
old TDX guest that do not know about it, but it is expected that the
guest will make the same action as TDVMCALL_STATUS_INVALID_OPERAND.
Currently, no known TDX guest checks TDVMCALL_STATUS_INVALID_OPERAND
specifically; for example Linux just checks for success.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
[Return it for untrapped KVM_HC_MAP_GPA_RANGE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- correct the ACPI GPIO access mode in gpio-loongson-64bit
- only obtain the interrupt for a single instance of the chip
controlled by gpio-mlxbf3
- fix an invalid value return from probe() in gpio-pca953x
- add missing MODULE_DEVICE_TABLE() to gpio-spacemit
- update the HiSilicon GPIO driver maintainer entry
* tag 'gpio-fixes-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: only get IRQ for device instance 0
gpio: pca953x: fix wrong error probe return value
gpio: spacemit: Add missing MODULE_DEVICE_TABLE
gpio: loongson-64bit: Correct Loongson-7A2000 ACPI GPIO access mode
MAINTAINERS: Update HiSilicon GPIO driver maintainer
|
|
into HEAD
KVM/riscv fixes for 6.16, take #1
- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #3
- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
missing synchronisation
- A small fix for the irqbypass hook fixes, tightening the check and
ensuring that we only deal with MSI for both the old and the new
route entry
- Rework the way the shadow LRs are addressed in a nesting
configuration, plugging an embarrassing bug as well as simplifying
the whole process
- Add yet another fix for the dreaded arch_timer_edge_cases selftest
|
|
Switch from personal domain to kernel.org address.
Signed-off-by: Drew Fustini <fustini@kernel.org>
Link: https://lore.kernel.org/r/20250619035457.331065-1-fustini@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific at this
time:
- Fixes for Cirrus codecs with SoundWire, including firmware name
updates
- Fix for i.MX8 SoC DSP
- Usual HD-audio, USB-audio, and ASoC AMD quirks
- Fixes for legendary SoundBlaster AWE32 ISA device (a real one, we
still got a bug report after 25 years)
- Minor build fixes"
* tag 'sound-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable headset Mic on Positivo P15X
ASoC: Intel: sof-function-topology-lib: Print out the unsupported dmic count
ASoC: doc: cs35l56: Add CS35L63 to the list of supported devices
ASoC: SOF: imx8: add core shutdown operation for imx8/imx8x
ALSA: hda/realtek: Add quirk for Asus GA605K
ALSA: hda/realtek: enable headset mic on Latitude 5420 Rugged
ASoC: amd: yc: update quirk data for HP Victus
ASoC: apple: mca: Drop default ARCH_APPLE in Kconfig
ALSA: usb-audio: Rename ALSA kcontrol PCM and PCM1 for the KTMicro sound card
ASoC: amd: yc: Add quirk for MSI Bravo 17 D7VF internal mic
ASoC: doc: cs35l56: Update to add new SoundWire firmware filename suffix
ASoC: cs35l56: Use SoundWire address as alternate firmware suffix on L56 B0
ASoC: cs35l56: Use SoundWire address as firmware name suffix for new silicon
ASoC: sdw_utils: Fix potential NULL pointer deref in is_sdca_endpoint_present()
ALSA: sb: Force to disable DMAs once when DMA mode is changed
ALSA: sb: Don't allow changing the DMA mode during operations
ALSA: hda/realtek: Add quirk for Asus GU605C
ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X513EA
ALSA: hda/realtek - Add mute LED support for HP Victus 16-s1xxx and HP Victus 15-fa1xxx
ALSA: ctxfi: Replace deprecated strcpy() with strscpy()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's nothing major (even the vmalloc one is just suppressing a
potential warning) but all worth having, nonetheless.
- Suppress KASAN false positive in stack unwinding code
- Drop redundant reset of the GCS state on exec()
- Don't try to descend into a !present PMD when creating a huge
vmap() entry at the PUD level
- Fix a small typo in the arm64 booting Documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
arm64/gcs: Don't call gcs_free() during flush_gcs()
arm64: Restrict pagetable teardown to avoid false warning
docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst
|
|
Some modules have BT_EN enabled via a hardware pull-up,
meaning it is not defined in the DTS and is not controlled
through the power sequence. In such cases, fall through
to follow the legacy flow.
Signed-off-by: Shuai Zhang <quic_shuaz@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
OBEX download from iPhone is currently slow due to small packet size
used to transfer data which doesn't follow the MTU negotiated during
L2CAP connection, i.e. 672 bytes instead of 32767:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 4103 (0x1007)
Source CID: 72
> ACL Data RX: Handle 11 flags 0x02 dlen 16
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 14608
Source CID: 72
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 20 len 19
Destination CID: 14608
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 72 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 72 len 21
Source CID: 14608
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 20 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 1 ReqSeq 2
< ACL Data TX: Handle 11 flags 0x00 dlen 13
Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 3
The MTUs are negotiated for each direction. In this traces 32767 for
iPhone->localhost and no MTU for localhost->iPhone, which based on
'4.4 L2CAP_CONFIGURATION_REQ' (Core specification v5.4, Vol. 3, Part
A):
The only parameters that should be included in the
L2CAP_CONFIGURATION_REQ packet are those that require different
values than the default or previously agreed values.
...
Any missing configuration parameters are assumed to have their
most recently explicitly or implicitly accepted values.
and '5.1 Maximum transmission unit (MTU)':
If the remote device sends a positive L2CAP_CONFIGURATION_RSP
packet it should include the actual MTU to be used on this channel
for traffic flowing into the local device.
...
The default value is 672 octets.
is set by BlueZ to 672 bytes.
It seems that the iPhone used the lowest negotiated value to transfer
data to the localhost instead of the negotiated one for the incoming
direction.
This could be fixed by using the MTU negotiated for the other
direction, if exists, in the L2CAP_CONFIGURATION_RSP.
This allows to use segmented packets as in the following traces:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 22 len 4
PSM: 4103 (0x1007)
Source CID: 72
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 24 len 19
Destination CID: 2832
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 15 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 15 len 21
Source CID: 2832
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 24 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0x4202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Start (len 21884) TxSeq 1 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0xc204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Continuation TxSeq 2 ReqSeq 2
This has been tested with kernel 5.4 and BlueZ 5.77.
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
During firmware download, if an error occurs, interrupts must be
disabled, synchronized, and re-enabled before retrying the download.
This change ensures proper interrupt handling to prevent race
conditions.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
It is possible when an inode is split into segments for multi-threaded
compression, and the tail extent of a segment could also be small.
Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250620153108.1368029-1-hsiangkao@linux.alibaba.com
|
|
A previous fix corrected the retry condition for when to continue a
current bundle, but it missed that the current (not the total) transfer
count also applies to the buffer put. If not, then for incrementally
consumed buffer rings repeated completions on the same request may end
up over consuming.
Reported-by: Roy Tang (ErgoniaTrading) <royonia@ergonia.io>
Cc: stable@vger.kernel.org
Fixes: 3a08988123c8 ("io_uring/net: only retry recv bundle for a full transfer")
Link: https://github.com/axboe/liburing/issues/1423
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT
section") neglected to adjust the sizes of the .data section when
CONFIG_EFI_SBAT_FILE is set. As the result, the produced PE binary is
incorrect and some tools complain about it. E.g. 'sbsign' reports:
# sbsign --key my.key --cert my.crt arch/arm64/boot/vmlinuz.efi
warning: file-aligned section .data extends beyond end of file
warning: checksum areas are greater than image size. Invalid section table?
Note, '__data_size' is also used in the PE optional header and it is not
entirely clear whether .sbat needs to be accounted as part of
SizeOfInitializedData or not. As the header seems to be unused by the real
world firmware, keeping the field equal to __data_size.
Fixes: 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section")
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@gmx.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Positivo P15X is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250619191215.17203-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large collection of fixes and updates that came in since
the merge window. Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.
|
|
Add "Thinkpad X1 Tablet Gen 2 Keyboard" PID to hid-lenovo driver to fix trackpoint not working issue.
Signed-off-by: Akira Inoue <niyarium@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
During appletb_kbd_probe, probe attempts to get the backlight device
by name. When this happens backlight_device_get_by_name looks for a
device in the backlight class which has name "appletb_backlight" and
upon finding a match it increments the reference count for the device
and returns it to the caller. However this reference is never released
leading to a reference leak.
Fix this by decrementing the backlight device reference count on removal
via put_device and on probe failure.
Fixes: 93a0fc489481 ("HID: hid-appletb-kbd: add support for automatic brightness control while using the touchbar")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Pull block fixes from Jens Axboe:
- Two fixes for aoe which fixes issues dating back to when this driver
was converted to blk-mq
- Fix for ublk, checking for valid queue depth and count values before
setting up a device
* tag 'block-6.16-20250619' of git://git.kernel.dk/linux:
ublk: santizize the arguments from userspace when adding a device
aoe: defer rexmit timer downdev work to workqueue
aoe: clean device rq_list in aoedev_downdev()
|
|
Pull io_uring fixes from Jens Axboe:
- Two fixes for error injection failures. One fixes a task leak issue
introduced in this merge window, the other an older issue with
handling allocation of a mapped buffer.
- Fix for a syzbot issue that triggers a kmalloc warning on attempting
an allocation that's too large
- Fix for an error injection failure causing a double put of a task,
introduced in this merge window
* tag 'io_uring-6.16-20250619' of git://git.kernel.dk/linux:
io_uring: fix potential page leak in io_sqe_buffer_register()
io_uring/sqpoll: don't put task_struct on tctx setup failure
io_uring: remove duplicate io_uring_alloc_task_context() definition
io_uring: fix task leak issue in io_wq_create()
io_uring/rsrc: validate buffer count with offset for cloning
|
|
Pull drm fixes from Dave Airlie:
"Bit of an uptick in fixes for rc3, msm and amdgpu leading the way,
with i915/xe/nouveau with a few each and then some scattered misc
bits, nothing looks too crazy:
msm:
- Display:
- Fixed DP output on SDM845
- Fixed 10nm DSI PLL init
- GPU:
- SUBMIT ioctl error path leak fixes
- drm half of stall-on-fault fixes
- a7xx: Missing CP_RESET_CONTEXT_STATE
- Skip GPU component bind if GPU is not in the device table
i915:
- Fix MIPI vtotal programming off by one on Broxton
- Fix PMU code for GCOV and AutoFDO enabled build
xe:
- A workaround update
- Fix memset on iomem
- Fix early wedge on GuC Load failure
amdgpu:
- DP tunneling fix
- LTTPR fix
- DSC fix
- DML2.x ABGR16161616 fix
- RMCM fix
- Backlight fixes
- GFX11 kicker support
- SDMA reset fixes
- VCN 5.0.1 fix
- Reset fix
- Misc small fixes
amdkfd:
- SDMA reset fix
- Fix race in GWS scheduling
nouveau:
- update docs reference
- fix backlight name buffer size
- fix UAF in r535 gsp rpc msg
- fix undefined shift
mgag200:
- drop export header
ast:
- drop export header
malidp:
- drop informational error
ssd130x:
- fix clear columns
etnaviv:
- scheduler locking fix
v3d:
- null pointer crash fix"
* tag 'drm-fixes-2025-06-20' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/xe: Fix early wedge on GuC load failure
drm/xe: Fix memset on iomem
drm/xe/bmg: Update Wa_16023588340
drm/amdgpu/sdma5.2: init engine reset mutex
drm/amdkfd: Fix race in GWS queue scheduling
drm/amdgpu/sdma5: init engine reset mutex
drm/amdgpu: switch job hw_fence to amdgpu_fence
drm/amdgpu: Fix SDMA UTC_L1 handling during start/stop sequences
drm/amdgpu: Release reset locks during failures
drm/amd/display: Check dce_hwseq before dereferencing it
drm/amdgpu: VCN v5_0_1 to prevent FW checking RB during DPG pause
drm/amdgpu: Use logical instance ID for SDMA v4_4_2 queue operations
drm/amdgpu: Fix SDMA engine reset with logical instance ID
drm/amdgpu: add kicker fws loading for gfx11/smu13/psp13
drm/amdgpu: Add kicker device detection
drm/amd/display: Export full brightness range to userspace
drm/amd/display: Only read ACPI backlight caps once
drm/amd/display: Fix RMCM programming seq errors
drm/amd/display: Fix mpv playback corruption on weston
drm/amd/display: Add more checks for DSC / HUBP ONO guarantees
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash (broken fallback finup) and
reinstates a Kconfig option to control the extra self-tests"
* tag 'v6.16-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Fix infinite recursion in ahash_def_finup
crypto: testmgr - reinstate kconfig control over full self-tests
|
|
msync and nommu are directly related to memory mapping, mincore is less so
but all are roughly speaking operating on virtual memory mappings from the
point of view of the user so this seems the most appropriate place for
them.
Link: https://lkml.kernel.org/r/20250617144130.147847-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These files seem best suited to shmem.
Link: https://lkml.kernel.org/r/20250617161359.166955-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
page_vma_mapped_walk() is used to traverse page tables from a VMA, used by
rmap logic once the reverse mapping has been traversed to the VMA level.
It is also used by other users (migration, damon, etc.) but is primarily
used by the reverse mapping and is a key part of its logic, so it seems
appropriate to place it here.
Link: https://lkml.kernel.org/r/20250617165142.173716-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This file is clearly specific to hugetlb so this seems the most
appropriate place for it.
Link: https://lkml.kernel.org/r/20250617171538.178042-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These files comprise the bootmem info logic which is initialised on
startup and also memory tests that are run on startup and as such this
seems the most appropriate section for them.
Link: https://lkml.kernel.org/r/20250617174538.188977-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
