summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-09scsi: error: alua: I/O errors for ALUA state transitionsRajashekhar M A
When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. Signed-off-by: Rajashekhar M A <rajs@netapp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20250606135924.27397-1-hare@kernel.org Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: storvsc: Increase the timeouts to storvsc_timeoutDexuan Cui
Currently storvsc_timeout is only used in storvsc_sdev_configure(), and 5s and 10s are used elsewhere. It turns out that rarely the 5s is not enough on Azure, so let's use storvsc_timeout everywhere. In case a timeout happens and storvsc_channel_init() returns an error, close the VMBus channel so that any host-to-guest messages in the channel's ringbuffer, which might come late, can be safely ignored. Add a "const" to storvsc_timeout. Cc: stable@kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1749243459-10419-1-git-send-email-decui@microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09drm/msm/adreno: Check for recognized GPU before bindRob Clark
If we have a newer dtb than kernel, we could end up in a situation where the GPU device is present in the dtb, but not in the drivers device table. We don't want this to prevent the display from probing. So check that we recognize the GPU before adding the GPU component. v2: use %pOF Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657701/
2025-06-09Merge tag 'for-net-2025-06-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - MGMT: Fix UAF on mgmt_remove_adv_monitor_complete - MGMT: Protect mgmt_pending list with its own lock - hci_core: fix list_for_each_entry_rcu usage - btintel_pcie: Increase the tx and rx descriptor count - btintel_pcie: Reduce driver buffer posting to prevent race condition - btintel_pcie: Fix driver not posting maximum rx buffers * tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Protect mgmt_pending list with its own lock Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race condition Bluetooth: btintel_pcie: Increase the tx and rx descriptor count Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffers Bluetooth: hci_core: fix list_for_each_entry_rcu usage ==================== Link: https://patch.msgid.link/20250605191136.904411-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09net_sched: sch_sfq: fix a potential crash on gso_skb handlingEric Dumazet
SFQ has an assumption of always being able to queue at least one packet. However, after the blamed commit, sch->q.len can be inflated by packets in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed by an immediate drop. Fix sfq_drop() to properly clear q->tail in this situation. Tested: ip netns add lb ip link add dev to-lb type veth peer name in-lb netns lb ethtool -K to-lb tso off # force qdisc to requeue gso_skb ip netns exec lb ethtool -K in-lb gro on # enable NAPI ip link set dev to-lb up ip -netns lb link set dev in-lb up ip addr add dev to-lb 192.168.20.1/24 ip -netns lb addr add dev in-lb 192.168.20.2/24 tc qdisc replace dev to-lb root sfq limit 100 ip netns exec lb netserver netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback") Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de> Closes: https://lore.kernel.org/netdev/9da42688-bfaa-4364-8797-e9271f3bdaef@hetzner-cloud.de/ Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250606165127.3629486-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09smb: client: disable path remapping with POSIX extensionsPhilipp Kerling
If SMB 3.1.1 POSIX Extensions are available and negotiated, the client should be able to use all characters and not remap anything. Currently, the user has to explicitly request this behavior by specifying the "nomapposix" mount option. Link: https://lore.kernel.org/4195bb677b33d680e77549890a4f4dd3b474ceaf.camel@rx2.rx-server.de Signed-off-by: Philipp Kerling <pkerling@casix.org> Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-06-09drm/msm/adreno: Pass device_node to find_chipid()Rob Clark
We are going to want to re-use this before the component is bound, when we don't yet have the device pointer (but we do have the of node). v2: use %pOF Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657705/
2025-06-09drm/msm: Rename add_components_mdp()Rob Clark
To better match add_gpu_components(). Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657700/
2025-06-09drivers: gpu: drm: msm: registers: improve reproducibilityRyan Eatmon
The files generated by gen_header.py capture the source path to the input files and the date. While that can be informative, it varies based on where and when the kernel was built as the full path is captured. Since all of the files that this tool is run on is under the drivers directory, this modifies the application to strip all of the path before drivers. Additionally it prints <stripped> instead of the date. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Viswanath Kraleti <viswanath.kraleti@oss.qualcomm.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/655599/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm/a7xx: Call CP_RESET_CONTEXT_STATEConnor Abbott
Calling this packet is necessary when we switch contexts because there are various pieces of state used by userspace to synchronize between BR and BV that are persistent across submits and we need to make sure that they are in a "safe" state when switching contexts. Otherwise a userspace submission in one context could cause another context to function incorrectly and hang, effectively a denial of service (although without leaking data). This was missed during initial a7xx bringup. Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support") Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654924/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix CP_RESET_CONTEXT_STATE bitfield namesConnor Abbott
Based on kgsl. Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support") Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654922/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09Merge branch '6.16/scsi-queue' into 6.16/scsi-fixesMartin K. Petersen
Pull in remaining fixes from queue branch. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: s390: zfcp: Ensure synchronous unit_addPeter Oberparleiter
Improve the usability of the unit_add sysfs attribute by ensuring that the associated FCP LUN scan processing is completed synchronously. This enables configuration tooling to consistently determine the end of the scan process to allow for serialization of follow-on actions. While the scan process associated with unit_add typically completes synchronously, it is deferred to an asynchronous background process if unit_add is used before initial remote port scanning has completed. This occurs when unit_add is used immediately after setting the associated FCP device online. To ensure synchronous unit_add processing, wait for remote port scanning to complete before initiating the FCP LUN scan. Cc: stable@vger.kernel.org Reviewed-by: M Nikhil <nikh1092@linux.ibm.com> Reviewed-by: Nihar Panda <niharp@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Nihar Panda <niharp@linux.ibm.com> Link: https://lore.kernel.org/r/20250603182252.2287285-2-niharp@linux.ibm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: iscsi: Fix incorrect error path labels for flashnode operationsAlok Tiwari
Correct the error handling goto labels used when host lookup fails in various flashnode-related event handlers: - iscsi_new_flashnode() - iscsi_del_flashnode() - iscsi_login_flashnode() - iscsi_logout_flashnode() - iscsi_logout_flashnode_sid() scsi_host_put() is not required when shost is NULL, so jumping to the correct label avoids unnecessary operations. These functions previously jumped to the wrong goto label (put_host), which did not match the intended cleanup logic. Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to ensure proper error handling. Also remove the unused put_host label under iscsi_new_flashnode() as it is no longer needed. No functional changes beyond accurate error path correction. Fixes: c6a4bb2ef596 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: mvsas: Fix typos in per-phy comments and SAS cmd port registersAnkit Chauhan
Spelling fixes: Deocder --> Decoder Memroy --> Memory This is a non-functional change aimed at improving code clarity. Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com> Link: https://lore.kernel.org/r/20250528110604.59528-1-ankitchauhan2065@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09drm/msm: Temporarily disable stall-on-fault after a page faultConnor Abbott
When things go wrong, the GPU is capable of quickly generating millions of faulting translation requests per second. When that happens, in the stall-on-fault model each access will stall until it wins the race to signal the fault and then the RESUME register is written. This slows processing page faults to a crawl as the GPU can generate faults much faster than the CPU can acknowledge them. It also means that all available resources in the SMMU are saturated waiting for the stalled transactions, so that other transactions such as transactions generated by the GMU, which shares translation resources with the GPU, cannot proceed. This causes a GMU watchdog timeout, which leads to a failed reset because GX cannot collapse when there is a transaction pending and a permanently hung GPU. On older platforms with qcom,smmu-v2, it seems that when one transaction is stalled subsequent faulting transactions are terminated, which avoids this problem, but the MMU-500 follows the spec here. To work around these problems, disable stall-on-fault as soon as we get a page fault until a cooldown period after pagefaults stop. This allows the GMU some guaranteed time to continue working. We only use stall-on-fault to halt the GPU while we collect a devcoredump and we always terminate the transaction afterward, so it's fine to miss some subsequent page faults. We also keep it disabled so long as the current devcoredump hasn't been deleted, because in that case we likely won't capture another one if there's a fault. After this commit HFI messages still occasionally time out, because the crashdump handler doesn't run fast enough to let the GMU resume, but the driver seems to recover from it. This will probably go away after the HFI timeout is increased. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654891/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Delete resume_translation()Connor Abbott
Unused since the previous commit. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654890/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Don't use a worker to capture fault devcoredumpConnor Abbott
Now that we use a threaded IRQ, it should be safe to do this in the fault handler. We can also remove fault_info from struct msm_gpu and just pass it directly. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654889/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix another leak in the submit error pathRob Clark
put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653583/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix a fence leak in submit error pathRob Clark
In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653584/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09SPI: omap2-mcspi: Fix SPI CS behaviour aroundMark Brown
Merge series from Félix Piédallu <felix.piedallu@non.se.com>: These patches fix the behaviour of the SPI Chip Select of the OMAP2 MCSPI driver used on TI SoCs. The omap2-mcspi driver supports the use of multi mode (multichannel in TI documentation). In this mode, the CS is asserted and deasserted by the hardware. The multi mode is disabled for messages when cs_change=0 for all transfers (e.g when CS is kept asserted between transfers of a same message). The multi mode also needs to be disabled for messages when cs_change=1 on the last transfer (e.g when CS is kept asserted after the WHOLE message), and the message right after. Currently, that is not the case and it CS is deasserted by hardware when it shouldn't. This breaks peripheral drivers that send multiple messages with the CS asserted in between. Patch 1 ensures that multi mode is disabled when cs_change=1 on the last transfer of the message. Patch 2 ensures that multi mode is disable on a message following one with cs_change=1 on the last transfer. This is the case for the TPM TIS SPI driver that uses this logic for flow control purposes. Tested on an AM6442 platform with a TPM ST33HTPH2X32AHE4.
2025-06-09cxl: fix return value in cxlctl_validate_set_features()Dan Carpenter
The cxlctl_validate_set_features() function is type bool. It's supposed to return true for valid requests and false for invalid. However, this error path returns ERR_PTR(-EINVAL) which is true when it was intended to return false. The incorrect return will result in kernel failing to prevent a incorrect op_size passed in from userspace to be detected. [ dj: Add user impact to commit log ] Fixes: f76e0bbc8bc3 ("cxl: Update prototype of function get_support_feature_info()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://patch.msgid.link/aDbFPSCujpJLY1if@stanley.mountain Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2025-06-09ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in the non-uapi headersThomas Huth
While the GCC and Clang compilers already define __ASSEMBLER__ automatically when compiling assembly code, __ASSEMBLY__ is a macro that only gets defined by the Makefiles in the kernel. This can be very confusing when switching between userspace and kernelspace coding, or when dealing with uapi headers that rather should use __ASSEMBLER__ instead. So let's standardize on the __ASSEMBLER__ macro that is provided by the compilers now. This is a completely mechanical patch (done with a simple "sed -i" statement). Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headersThomas Huth
__ASSEMBLY__ is only defined by the Makefile of the kernel, so this is not really useful for uapi headers (unless the userspace Makefile defines it, too). Let's switch to __ASSEMBLER__ which gets set automatically by the compiler when compiling assembly code. Cc: linux-snps-arc@lists.infradead.org Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09ARC: unwind: Use built-in sort swap to reduce code size and improve performanceYu-Chun Lin
The custom swap function used in sort() was identical to the default built-in sort swap. Remove the custom swap function and passes NULL to sort(), allowing it to use the default swap function. This change reduces code size and improves performance, particularly when CONFIG_MITIGATION_RETPOLINE is enabled. With RETPOLINE mitigation, indirect function calls incur significant overhead, and using the default swap function avoids this cost. $ ./scripts/bloat-o-meter ./unwind.o.old ./unwind.o.new add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-22 (-22) Function old new delta init_unwind_hdr.constprop 544 540 -4 swap_eh_frame_hdr_table_entries 18 - -18 Total: Before=4410, After=4388, chg -0.50% Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09ARC: atomics: Implement arch_atomic64_cmpxchg using _relaxedJason Gunthorpe
The core atomic code has a number of macros where it elaborates architecture primitives into more functions. ARC uses arch_atomic64_cmpxchg() as it's architecture primitive which disable alot of the additional functions. Instead provide arch_cmpxchg64_relaxed() as the primitive and rely on the core macros to create arch_cmpxchg64(). The macros will also provide other functions, for instance, try_cmpxchg64_release(), giving a more complete implementation. Suggested-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/Z0747n5bSep4_1VX@J2N7QTR9R3 Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2025-06-09cpupower: split unitdir from libdir in MakefileFrancesco Poli (wintermute)
Improve the installation procedure for the systemd service unit 'cpupower.service', to be more flexible. Some distros install libraries to /usr/lib64/, but systemd service units have to be installed to /usr/lib/systemd/system: as a consequence, the installation procedure should not assume that systemd service units can be installed to ${libdir}/systemd/system ... Define a dedicated variable ("unitdir") in the Makefile. Link: https://lore.kernel.org/linux-pm/260b6d79-ab61-43b7-a0eb-813e257bc028@leemhuis.info/T/#m0601940ab439d5cbd288819d2af190ce59e810e6 Fixes: 9c70b779ad91 ("cpupower: add a systemd service to run cpupower") Link: https://lore.kernel.org/r/20250521211656.65646-1-invernomuto@paranoici.org Signed-off-by: Francesco Poli (wintermute) <invernomuto@paranoici.org> Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-06-09selftests/x86: Add a test to detect infinite SIGTRAP handler loopXin Li (Intel)
When FRED is enabled, if the Trap Flag (TF) is set without an external debugger attached, it can lead to an infinite loop in the SIGTRAP handler. To avoid this, the software event flag in the augmented SS must be cleared, ensuring that no single-step trap remains pending when ERETU completes. This test checks for that specific scenario—verifying whether the kernel correctly prevents an infinite SIGTRAP loop in this edge case when FRED is enabled. The test should _always_ pass with IDT event delivery, thus no need to disable the test even when FRED is not enabled. Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
2025-06-09x86/fred/signal: Prevent immediate repeat of single step trap on return from ↵Xin Li (Intel)
SIGTRAP handler Clear the software event flag in the augmented SS to prevent immediate repeat of single step trap on return from SIGTRAP handler if the trap flag (TF) is set without an external debugger attached. Following is a typical single-stepping flow for a user process: 1) The user process is prepared for single-stepping by setting RFLAGS.TF = 1. 2) When any instruction in user space completes, a #DB is triggered. 3) The kernel handles the #DB and returns to user space, invoking the SIGTRAP handler with RFLAGS.TF = 0. 4) After the SIGTRAP handler finishes, the user process performs a sigreturn syscall, restoring the original state, including RFLAGS.TF = 1. 5) Goto step 2. According to the FRED specification: A) Bit 17 in the augmented SS is designated as the software event flag, which is set to 1 for FRED event delivery of SYSCALL, SYSENTER, or INT n. B) If bit 17 of the augmented SS is 1 and ERETU would result in RFLAGS.TF = 1, a single-step trap will be pending upon completion of ERETU. In step 4) above, the software event flag is set upon the sigreturn syscall, and its corresponding ERETU would restore RFLAGS.TF = 1. This combination causes a pending single-step trap upon completion of ERETU. Therefore, another #DB is triggered before any user space instruction is executed, which leads to an infinite loop in which the SIGTRAP handler keeps being invoked on the same user space IP. Fixes: 14619d912b65 ("x86/fred: FRED entry/exit and dispatch code") Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250609084054.2083189-2-xin%40zytor.com
2025-06-09spi: stm32-ospi: Make usage of reset_control_acquire/release() APIPatrice Chotard
As ospi reset is consumed by both OMM and OSPI drivers, use the reset acquire/release mechanism which ensure exclusive reset usage. This avoid to call reset_control_get/put() in OMM driver each time we need to reset OSPI children and guarantee the reset line stays deasserted. During resume, OMM driver takes temporarily control of reset. Fixes: 79b8a705e26c ("spi: stm32: Add OSPI driver") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patch.msgid.link/20250609-b4-upstream_ospi_reset_update-v6-1-5b602b567e8a@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-09drm/xe/svm: Fix regression disallowing 64K SVM migrationMaarten Lankhorst
When changing the condition from >= SZ_64K, it was changed to <= SZ_64K. This disallows migration of 64K, which is the exact minimum allowed. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5057 Fixes: 794f5493f518 ("drm/xe: Strict migration policy for atomic SVM faults") Cc: stable@vger.kernel.org Cc: Matthew Brost <matthew.brost@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Link: https://lore.kernel.org/r/20250521090102.2965100-1-dev@lankhorst.se (cherry picked from commit 531bef26d189b28bf0d694878c0e064b30990b6c) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-09dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $idRob Herring (Arm)
The $id value has a double "//". Drop it. Fixes: 9ca5a7d9d2e0 ("dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250507215903.2748698-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-06-09accel/amdxdna: Fix incorrect PSP firmware sizeLizhi Hou
The incorrect PSP firmware size is used for initializing. It may cause error for newer version firmware. Fixes: 8c9ff1b181ba ("accel/amdxdna: Add a new driver for AMD AI Engine") Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/20250604143217.1386272-1-lizhi.hou@amd.com
2025-06-09mtk-sd: Fix a pagefault in dma_unmap_sg() for not prepared dataMasami Hiramatsu (Google)
When swiotlb buffer is full, the dma_map_sg() returns 0 to msdc_prepare_data(), but it does not check it and sets the MSDC_PREPARE_FLAG. swiotlb_tbl_map_single() /* prints "swiotlb buffer is full" */ <-swiotlb_map() <-dma_direct_map_page() <-dma_direct_map_sg() <-__dma_map_sg_attrs() <-dma_map_sg_attrs() <-dma_map_sg() /* returns 0 (pages mapped) */ <-msdc_prepare_data() Then, the msdc_unprepare_data() checks MSDC_PREPARE_FLAG and calls dma_unmap_sg() with unmapped pages. It causes a page fault. To fix this problem, Do not set MSDC_PREPARE_FLAG if dma_map_sg() fails because this is not prepared. Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/174908565814.4056588.769599127120955383.stgit@mhiramat.tok.corp.google.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-09mmc: sdhci-of-k1: Fix error code in probe()Dan Carpenter
If spacemit_sdhci_get_clocks() fails, then propagate the error code. Don't return success. Fixes: e5502d15b0f3 ("mmc: sdhci-of-k1: add support for SpacemiT K1 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Yixun Lan <dlan@gentoo.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/aDVTtQdXVtRhxOrb@stanley.mountain Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-09mmc: core: sd: Apply BROKEN_SD_DISCARD quirk earlierAvri Altman
Move the BROKEN_SD_DISCARD quirk for certain SanDisk SD cards from the `mmc_blk_fixups[]` to `mmc_sd_fixups[]`. This ensures the quirk is applied earlier in the device initialization process, aligning with the reasoning in [1]. Applying the quirk sooner prevents the kernel from incorrectly enabling discard support on affected cards during initial setup. [1] https://lore.kernel.org/all/20240820230631.GA436523@sony.com Fixes: 07d2872bf4c8 ("mmc: core: Add SD card quirk for broken discard") Signed-off-by: Avri Altman <avri.altman@sandisk.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250526114445.675548-1-avri.altman@sandisk.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-09spi: offload: check offload ops existence before disabling the triggerAndres Urian Florez
Add a safe guard in spi_offload_trigger to check the existence of offload->ops before invoking the trigger_disable callback Signed-off-by: Andres Urian Florez <andres.emb.sys@gmail.com> Link: https://patch.msgid.link/20250608230422.325360-1-andres.emb.sys@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-09pinctrl: tb10x: Drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF warning: pinctrl-tb10x.c:815:34: warning: unused variable 'tb10x_pinctrl_dt_ids' [-Wunused-const-variable] Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505301317.EI1caRC0-lkp@intel.com/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250601105100.27927-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: MAINTAINERS: Drop bouncing Jianlong HuangKrzysztof Kozlowski
Emails to Jianlong Huang bounce since 9 months, so drop the person from maintainers: 550 5.4.1 Recipient address rejected: Access denied. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250528104514.184122-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: st: Drop unused st_gpio_bank() functionKrzysztof Kozlowski
Static inline st_gpio_bank() function is not referenced: pinctrl-st.c:377:19: error: unused function 'st_gpio_bank' [-Werror,-Wunused-function] Fixes: 701016c0cba5 ("pinctrl: st: Add pinctrl and pinconf support.") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250528092201.52132-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: qcom: pinctrl-qcm2290: Add missing pinsWojciech Slenska
Added the missing pins to the qcm2290_pins table. Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com> Fixes: 48e049ef1238 ("pinctrl: qcom: Add QCM2290 pinctrl driver") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250523101437.59092-1-wojciech.slenska@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09pinctrl: qcom: switch to devm_gpiochip_add_data()Dmitry Baryshkov
In order to simplify cleanup actions, use devres-enabled version of gpiochip_add_data(). As the msm_pinctrl_remove() function is now empty, drop it and all its calls from the corresponding pinctrl drivers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-3-249999af0fc1@oss.qualcomm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-09ALSA: hda/realtek - Add mute LED support for HP Victus 16-s1xxx and HP ↵Edip Hazuri
Victus 15-fa1xxx The mute led on those laptops is using ALC245 but requires a quirk to work This patch enables the existing quirk for the devices. Tested on my Victus 16-s1011nt Laptop and my friend's Victus 15-fa1xxx. The LED behaviour works as intended. Cc: <stable@vger.kernel.org> Signed-off-by: Edip Hazuri <edip@medip.dev> Link: https://patch.msgid.link/20250609075943.13934-2-edip@medip.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-09ALSA: ctxfi: Replace deprecated strcpy() with strscpy()Brahmajit Das
strcpy() is deprecated; use strscpy() instead. Use strscpy() to copy the long name because there's no string to format with sprintf(). No functional changes intended. Link: https://github.com/KSPP/linux/issues/88 Signed-off-by: Brahmajit Das <listout@listout.xyz> Link: https://patch.msgid.link/20250606204000.8156-1-listout@listout.xyz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-09x86/platform/amd: replace down_timeout() with down_interruptible()Jake Hillion
Currently hsmp_send_message() uses down_timeout() with a 100ms timeout to take the semaphore. However __hsmp_send_message(), the content of the critical section, has a sleep in it. On systems with significantly delayed scheduling behaviour this may take over 100ms. Convert this method to down_interruptible(). Leave the error handling the same as the documentation currently is not specific about what error is returned. Previous behaviour: a caller who competes with another caller stuck in the critical section due to scheduler delays would receive -ETIME. New behaviour: a caller who competes with another caller stuck in the critical section due to scheduler delays will complete successfully. Reviewed-by: Suma Hegde <suma.hegde@amd.com> Tested-by: Suma Hegde <suma.hegde@amd.com> Signed-off-by: Jake Hillion <jake@hillion.co.uk> Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-2-a811bc3dd74a@hillion.co.uk Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09x86/platform/amd: move final timeout check to after final sleepJake Hillion
__hsmp_send_message sleeps between result read attempts and has a timeout of 100ms. Under extreme load it's possible for these sleeps to take a long time, exceeding the 100ms. In this case the current code does not check the register and fails with ETIMEDOUT. Refactor the loop to ensure there is at least one read of the register after a sleep of any duration. This removes instances of ETIMEDOUT with a single caller, even with a misbehaving scheduler. Tested on AMD Bergamo machines. Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com> Reviewed-by: Suma Hegde <suma.hegde@amd.com> Tested-by: Suma Hegde <suma.hegde@amd.com> Signed-off-by: Jake Hillion <jake@hillion.co.uk> Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/amd: pmc: Clear metrics table at start of cycleMario Limonciello
The area of memory that contains the metrics table may contain garbage when the cycle starts. This normally doesn't matter because the cycle itself will populate it with valid data, however commit 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles") started to use it during the check() phase. Depending upon what garbage is in the table it's possible that the system will wait 2.5 seconds for even the first cycle, which will be visible to a user. To prevent this from happening explicitly clear the table when logging is started. Fixes: 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/intel: power-domains: Fix error code in tpmi_init()Dan Carpenter
Return -ENOMEM instead of success if kcalloc() fails. Fixes: e37be5d85c60 ("platform/x86/intel: power-domains: Add interface to get Linux die ID") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/aEKvIGCt6d8Gcx4S@stanley.mountain Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86: samsung-galaxybook: Add SAM0426Joshua Grisham
Add device ID SAM0426 (Notebook 9 Pro and similar devices) as reported and tested by GitHub user "diego-karsa" [1]. [1]: https://github.com/joshuagrisham/samsung-galaxybook-extras/issues/69 Signed-off-by: Joshua Grisham <josh@joshuagrisham.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250606130909.207047-1-josh@joshuagrisham.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09ALSA: hda/intel: Add Thinkpad E15 to PM deny listTakashi Iwai
Lenovo Thinkpad E15 with Conexant CX8070 codec seems causing ugly noises after runtime-PM suspend. Disable the codec runtime PM as a workaround. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220210 Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250608091415.21170-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-07-03 04:58:05 +0000