| Age | Commit message (Collapse) | Author |
|---|
|
Patch series "mm: count the number of anonymous THPs per size", v4.
Knowing the number of transparent anon THPs in the system is crucial
for performance analysis. It helps in understanding the ratio and
distribution of THPs versus small folios throughout the system.
Additionally, partial unmapping by userspace can lead to significant waste
of THPs over time and increase memory reclamation pressure. We need this
information for comprehensive system tuning.
This patch (of 2):
Let's track for each anonymous THP size, how many of them are currently
allocated. We'll track the complete lifespan of an anon THP, starting
when it becomes an anon THP ("large anon folio") (->mapping gets set),
until it gets freed (->mapping gets cleared).
Introduce a new "nr_anon" counter per THP size and adjust the
corresponding counter in the following cases:
* We allocate a new THP and call folio_add_new_anon_rmap() to map
it the first time and turn it into an anon THP.
* We split an anon THP into multiple smaller ones.
* We migrate an anon THP, when we prepare the destination.
* We free an anon THP back to the buddy.
Note that AnonPages in /proc/meminfo currently tracks the total number of
*mapped* anonymous *pages*, and therefore has slightly different
semantics. In the future, we might also want to track "nr_anon_mapped"
for each THP size, which might be helpful when comparing it to the number
of allocated anon THPs (long-term pinning, stuck in swapcache, memory
leaks, ...).
Further note that for now, we only track anon THPs after they got their
->mapping set, for example via folio_add_new_anon_rmap(). If we would
allocate some in the swapcache, they will only show up in the statistics
for now after they have been mapped to user space the first time, where we
call folio_add_new_anon_rmap().
[akpm@linux-foundation.org: documentation fixups, per David]
Link: https://lkml.kernel.org/r/3e8add35-e26b-443b-8a04-1078f4bc78f6@redhat.com
Link: https://lkml.kernel.org/r/20240824010441.21308-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240824010441.21308-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuai Yuan <yuanshuai@oppo.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are several comments all over the place, which uses a wrong singular
form of jiffies.
Replace 'jiffie' by 'jiffy'. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
|
|
'nocb.09.09.24a', 'rcutorture.14.08.24a', 'rcustall.09.09.24a', 'srcu.12.08.24a', 'rcu.tasks.14.08.24a', 'rcu_scaling_tests.15.08.24a', 'fixes.12.08.24a' and 'misc.11.08.24a' into next.09.09.24a
|
|
The Arm NI-700 Network-on-Chip Interconnect has a relatively
straightforward design with a hierarchy of voltage, power, and clock
domains, where each clock domain then contains a number of interface
units and a PMU which can monitor events thereon. As such, it begets a
relatively straightforward driver to interface those PMUs with perf.
Even more so than with arm-cmn, users will require detailed knowledge of
the wider system topology in order to meaningfully analyse anything,
since the interconnect itself cannot know what lies beyond the boundary
of each inscrutably-numbered interface. Given that, for now they are
also expected to refer to the NI-700 documentation for the relevant
event IDs to provide as well. An identifier is implemented so we can
come back and add jevents if anyone really wants to.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9933058d0ab8138c78a61cd6852ea5d5ff48e393.1725470837.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit ed5cc702d311 ("block: Add config option to not allow writing to mounted
devices") added a Kconfig option along with a kernel command-line tuning to
control writes to mounted block devices, as a means to deal with fuzzers like
Syzkaller, that provokes kernel crashes by directly writing on block devices
bypassing the filesystem (so the FS has no awareness and cannot cope with that).
The patch just missed adding such kernel command-line option to the kernel
documentation, so let's fix that.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240828145045.309835-1-gpiccoli@igalia.com
|
|
This is done primarily to get a docs build fix merged via another tree so
that "make htmldocs" stops failing.
|
|
Add support for the Extron DA HD 4K Plus series of 4K HDMI
Distrubution Amplifiers (aka HDMI Splitters).
These devices support CEC and this driver adds support for the
CEC protocol for both the input and all outputs (2, 4 or 6 outputs,
depending on the model).
It also exports the EDID from the outputs and allows reading and
setting the EDID of the input.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
|
|
uncore documentation
Added documentation about the functionality of efficiency vs. latency tradeoff
control in intel Xeon processors, and how this is configured via sysfs.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240828153657.1296410-2-tero.kristo@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add an on-by-default module param, enable_virt_at_load, to let userspace
force virtualization to be enabled in hardware when KVM is initialized,
i.e. just before /dev/kvm is exposed to userspace. Enabling virtualization
during KVM initialization allows userspace to avoid the additional latency
when creating/destroying the first/last VM (or more specifically, on the
0=>1 and 1=>0 edges of creation/destruction).
Now that KVM uses the cpuhp framework to do per-CPU enabling, the latency
could be non-trivial as the cpuhup bringup/teardown is serialized across
CPUs, e.g. the latency could be problematic for use case that need to spin
up VMs quickly.
Prior to commit 10474ae8945c ("KVM: Activate Virtualization On Demand"),
KVM _unconditionally_ enabled virtualization during load, i.e. there's no
fundamental reason KVM needs to dynamically toggle virtualization. These
days, the only known argument for not enabling virtualization is to allow
KVM to be autoloaded without blocking other out-of-tree hypervisors, and
such use cases can simply change the module param, e.g. via command line.
Note, the aforementioned commit also mentioned that enabling SVM (AMD's
virtualization extensions) can result in "using invalid TLB entries".
It's not clear whether the changelog was referring to a KVM bug, a CPU
bug, or something else entirely. Regardless, leaving virtualization off
by default is not a robust "fix", as any protection provided is lost the
instant userspace creates the first VM.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
disabled
As discussed in [1], zswap-related settings natually lose their effect
when zswap is disabled, specifically zswap.writeback here. Be explicit
about this behavior.
[1] https://lore.kernel.org/linux-kernel/CAKEwX=Mhbwhh-=xxCU-RjMXS_n=RpV3Gtznb2m_3JgL+jzz++g@mail.gmail.com/
[akpm@linux-foundation.org: fix/simplify text]
Link: https://lkml.kernel.org/r/20240823162506.12117-3-me@yhndnzj.com
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The ability to observe the demotion and promotion decisions made by the
kernel on a per-cgroup basis is important for monitoring and tuning
containerized workloads on machines equipped with tiered memory.
Different containers in the system may experience drastically different
memory tiering actions that cannot be distinguished from the global
counters alone.
For example, a container running a workload that has a much hotter memory
accesses will likely see more promotions and fewer demotions, potentially
depriving a colocated container of top tier memory to such an extent that
its performance degrades unacceptably.
For another example, some containers may exhibit longer periods between
data reuse, causing much more numa_hint_faults than numa_pages_migrated.
In this case, tuning hot_threshold_ms may be appropriate, but the signal
can easily be lost if only global counters are available.
In the long term, we hope to introduce per-cgroup control of promotion and
demotion actions to implement memory placement policies in tiering.
This patch set adds seven counters to memory.stat in a cgroup:
numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd,
pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_*
and pgpromote_success are also available in memory.numa_stat.
count_memcg_events_mm() is added to count multiple event occurrences at
once, and get_mem_cgroup_from_folio() is added because we need to get a
reference to the memcg of a folio before it's migrated to track
numa_pages_migrated. The accounting of PGDEMOTE_* is moved to
shrink_inactive_list() before being changed to per-cgroup.
[kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst]
Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu
Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu
Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
NUMA emulation can be now enabled on arm64 and riscv in addition to x86.
Move description of numa=fake parameters from x86 documentation of
admin-guide/kernel-parameters.txt
Link: https://lkml.kernel.org/r/20240807064110.1003856-27-rppt@kernel.org
Suggested-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 79365026f869 ("crash: add a new kexec flag for hotplug support")
generalizes the crash hotplug support to allow architectures to update
multiple kexec segments on CPU/Memory hotplug and not just elfcorehdr.
Therefore, update the relevant kernel documentation to reflect the same.
No functional change.
Link: https://lkml.kernel.org/r/20240812041651.703156-1-sourabhjain@linux.ibm.com
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Petr Tesarik <petr@tesarici.cz>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The pressure_level in memcg v1 provides memory pressure notifications to
the user space. At the moment it provides notifications for three levels
of memory pressure i.e. low, medium and critical, which are defined based
on internal memory reclaim implementation details. More specifically the
ratio of scanned and reclaimed pages during a memory reclaim. However
this is not robust as there are workloads with mostly unreclaimable user
memory or kernel memory.
For v2, the users can use PSI for memory pressure status of the system or
the cgroup. Let's start the deprecation process for pressure_level and
add warnings to gather the info on how the current users are using this
interface and how they can be used to PSI.
Link: https://lkml.kernel.org/r/20240814220021.3208384-5-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The oom_control provides functionality to disable memcg oom-killer,
notifications on oom-kill and reading the stats regarding oom-kills. This
interface was mainly introduced to provide functionality for userspace
oom-killers. However it is not robust enough and only supports OOM
handling in the page fault path.
For v2, the users can use the combination of memory.events notifications,
memory.high and PSI to provide userspace OOM-killing functionality.
Actually LMKD in Android and OOMd in systemd and Meta infrastructure
already use PSI in combination with other stats to implement userspace
OOM-killing.
Let's start the deprecation process for v1 and gather the info on how the
current users are using this interface and work on providing a more robust
functionality in v2.
Link: https://lkml.kernel.org/r/20240814220021.3208384-4-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memcg v1 provides soft limit functionality for the best effort memory
sharing between multiple workloads on a system. It is usually triggered
through kswapd and at the moment does not reclaim kernel memory.
Memcg v2 provides more straightforward best effort (memory.low) and hard
protection (memory.min) functionalities. Let's initiate the deprecation
of soft limit from v1 and gather if v2 needs something more to move the
existing v1 users to v2 regarding soft limit.
Link: https://lkml.kernel.org/r/20240814220021.3208384-3-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memcg: initiate deprecation of v1 features", v2.
Start the deprecation process of the memcg v1 features which we discussed
during LSFMMBPF 2024 [1]. For now add the warnings to collect the
information on how the current users are using these features. Next we
will work on providing better alternatives in v2 (if needed) and fully
deprecate these features.
Link: https://lwn.net/Articles/974575 [1]
This patch (of 4):
Memcg v1 provides opt-in TCP memory accounting feature. However it is
mostly unused due to its performance impact on the network traffic. In
v2, the TCP memory is accounted in the regular memory usage and is
transparent to the users but they can observe the TCP memory usage through
memcg stats.
Let's initiate the deprecation process of memcg v1's tcp accounting
functionality and add warnings to gather if there are any users and if
there are, collect how they are using it and plan to provide them better
alternative in v2.
Link: https://lkml.kernel.org/r/20240814220021.3208384-1-shakeel.butt@linux.dev
Link: https://lkml.kernel.org/r/20240814220021.3208384-2-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add thp_anon= cmdline parameter to allow specifying the default enablement
of each supported anon THP size. The parameter accepts the following
format and can be provided multiple times to configure each size:
thp_anon=<size>,<size>[KMG]:<value>;<size>-<size>[KMG]:<value>
An example:
thp_anon=16K-64K:always;128K,512K:inherit;256K:madvise;1M-2M:never
See Documentation/admin-guide/mm/transhuge.rst for more details.
Configuring the defaults at boot time is useful to allow early user space
to take advantage of mTHP before its been configured through sysfs.
[v-songbaohua@oppo.com: use get_oder() and check size is is_power_of_2]
Link: https://lkml.kernel.org/r/20240814224635.43272-1-21cnbao@gmail.com
[ryan.roberts@arm.com: some minor cleanup according to David's comments]
Link: https://lkml.kernel.org/r/20240820105244.62703-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240814020247.67297-1-21cnbao@gmail.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Co-developed-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <ioworker0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm, memcg: cg2 memory{.swap,}.peak write handlers", v7.
This patch (of 2):
Other mechanisms for querying the peak memory usage of either a process or
v1 memory cgroup allow for resetting the high watermark. Restore parity
with those mechanisms, but with a less racy API.
For example:
- Any write to memory.max_usage_in_bytes in a cgroup v1 mount resets
the high watermark.
- writing "5" to the clear_refs pseudo-file in a processes's proc
directory resets the peak RSS.
This change is an evolution of a previous patch, which mostly copied the
cgroup v1 behavior, however, there were concerns about races/ownership
issues with a global reset, so instead this change makes the reset
filedescriptor-local.
Writing any non-empty string to the memory.peak and memory.swap.peak
pseudo-files reset the high watermark to the current usage for subsequent
reads through that same FD.
Notably, following Johannes's suggestion, this implementation moves the
O(FDs that have written) behavior onto the FD write(2) path. Instead, on
the page-allocation path, we simply add one additional watermark to
conditionally bump per-hierarchy level in the page-counter.
Additionally, this takes Longman's suggestion of nesting the
page-charging-path checks for the two watermarks to reduce the number of
common-case comparisons.
This behavior is particularly useful for work scheduling systems that need
to track memory usage of worker processes/cgroups per-work-item. Since
memory can't be squeezed like CPU can (the OOM-killer has opinions), these
systems need to track the peak memory usage to compute system/container
fullness when binpacking workitems.
Most notably, Vimeo's use-case involves a system that's doing global
binpacking across many Kubernetes pods/containers, and while we can use
PSI for some local decisions about overload, we strive to avoid packing
workloads too tightly in the first place. To facilitate this, we track
the peak memory usage. However, since we run with long-lived workers (to
amortize startup costs) we need a way to track the high watermark while a
work-item is executing. Polling runs the risk of missing short spikes
that last for timescales below the polling interval, and peak memory
tracking at the cgroup level is otherwise perfect for this use-case.
As this data is used to ensure that binpacked work ends up with sufficient
headroom, this use-case mostly avoids the inaccuracies surrounding
reclaimable memory.
Link: https://lkml.kernel.org/r/20240730231304.761942-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-2-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, the behavior of zswap.writeback wrt. the cgroup hierarchy
seems a bit odd. Unlike zswap.max, it doesn't honor the value from parent
cgroups. This surfaced when people tried to globally disable zswap
writeback, i.e. reserve physical swap space only for hibernation [1] -
disabling zswap.writeback only for the root cgroup results in subcgroups
with zswap.writeback=1 still performing writeback.
The inconsistency became more noticeable after I introduced the
MemoryZSwapWriteback= systemd unit setting [2] for controlling the knob.
The patch assumed that the kernel would enforce the value of parent
cgroups. It could probably be workarounded from systemd's side, by going
up the slice unit tree and inheriting the value. Yet I think it's more
sensible to make it behave consistently with zswap.max and friends.
[1] https://wiki.archlinux.org/title/Power_management/Suspend_and_hibernate#Disable_zswap_writeback_to_use_the_swap_space_only_for_hibernation
[2] https://github.com/systemd/systemd/pull/31734
Link: https://lkml.kernel.org/r/20240823162506.12117-1-me@yhndnzj.com
Fixes: 501a06fe8e4c ("zswap: memcontrol: implement zswap writeback disabling")
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently users can get the Root Ports supported by the PCIe PMU by
"bus" sysfs attributes which indicates the PCIe bus number where
Root Ports are located. This maybe insufficient since Root Ports
supported by different PCIe PMUs may be located on the same PCIe bus.
So export the BDF range the Root Ports additionally.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-4-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This adds a Kconfig option and boot param to allow removing
the FOLL_FORCE flag from /proc/pid/mem write calls because
it can be abused.
The traditional forcing behavior is kept as default because
it can break GDB and some other use cases.
Previously we tried a more sophisticated approach allowing
distributions to fine-tune /proc/pid/mem behavior, however
that got NAK-ed by Linus [1], who prefers this simpler
approach with semantics also easier to understand for users.
Link: https://lore.kernel.org/lkml/CAHk-=wiGWLChxYmUA5HrT5aopZrB7_2VTa0NLZcxORgkUe5tEQ@mail.gmail.com/ [1]
Cc: Doug Anderson <dianders@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://lore.kernel.org/r/20240802080225.89408-1-adrian.ratiu@collabora.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a method to quickly verify whether safe RET operates properly on
a given system using perf tool.
Also, add a selftest which does the same thing.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240731160531.28640-1-bp@kernel.org
|
|
options
These have been deprecated for a decade[1] and removed two years ago[2].
1: f70486055ee351158bd6999f3965ad378b52c694
2: 2d544ec923dbe5fbed64a7f43dccf527218380bc
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Link: https://patch.msgid.link/20240728003433.2566649-1-stefan.tauner@gmx.at
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Update bug reporting info in bug-hunting.rst to direct people to
driver/subsystem bug trackers, if explicitly specified with the
MAINTAINERS "B:" entry. Use the new get_maintainer.pl --bug option to
print the info.
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240815113450.3397499-2-jani.nikula@intel.com
|
|
Rewrite the short document on bisecting kernel bugs. The new text
improves .config handling, brings a mention of 'git bisect skip', and
explains what to do after the bisection finished -- including trying a
revert to verify the result. The rewrite at the same time removes the
unrelated and outdated section on 'Devices not appearing' and replaces
some sentences about bug reporting with a pointer to the document
covering that topic in detail.
This overall brings the approach close to the one in the recently added
text Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst.
As those two texts serve a similar purpose for different audiences,
mention that document in the head of this one and outline when the
other might be the better one to follow.
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/74dc0137dcc3e2c05648e885a7bc31ffd39a0890.1724312119.git.linux@leemhuis.info
|
|
Add a new document Documentation/trace/debugging.rst that will hold
various ways to debug tracing.
This initial version mentions trace_printk and how to create persistent
buffers that can last across bootups.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineeth Pillai <vineeth@bitbyteword.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Jonathan Corbet" <corbet@lwn.net>
Link: https://lore.kernel.org/20240823014019.702433486@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If the persistent boot mapped ring buffer is used for trace_printk(),
force it to not use the binary versions. trace_printk() by default uses
bin_printf() that only saves the pointer to the format and not the format
itself inside the ring buffer. But for a persistent buffer that is read
after reboot, the pointers to the format strings may not be the same, or
worse, not even exist! Instead, just force the more robust, but slower,
version that does the formatting before saving into the ring buffer.
The boot mapped buffer can now be used for trace_printk and friends!
Using the trace_printk() and the persistent buffer was used to debug the
issue with the osnoise tracer:
Link: https://lore.kernel.org/all/20240822103443.6a6ae051@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineeth Pillai <vineeth@bitbyteword.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Jonathan Corbet" <corbet@lwn.net>
Link: https://lore.kernel.org/20240823014019.386925800@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, trace_printk() just goes to the top level ring buffer. But
there may be times that it should go to one of the instances created by
the kernel command line.
Add a new trace_instance flag: traceprintk (also can use "printk" or
"trace_printk" as people tend to forget the actual flag name).
trace_instance=foo^traceprintk
Will assign the trace_printk to this buffer at boot up.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineeth Pillai <vineeth@bitbyteword.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Jonathan Corbet" <corbet@lwn.net>
Link: https://lore.kernel.org/20240823014019.226694946@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a "flags" delimiter (^) to the "trace_instance" kernel command line
parameter, and add the "traceoff" flag. The format is:
trace_instance=<name>[^<flag1>[^<flag2>]][@<memory>][,<events>]
The code allows for more than one flag to be added, but currently only
"traceoff" is done so.
The motivation for this change came from debugging with the persistent
ring buffer and having trace_printk() writing to it. The trace_printk
calls are always enabled, and the boot after the crash was having the
unwanted trace_printks from the current boot inject into the ring buffer
with the trace_printks of the crash kernel, making the output very
confusing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineeth Pillai <vineeth@bitbyteword.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Jonathan Corbet" <corbet@lwn.net>
Link: https://lore.kernel.org/20240823014019.053229958@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Update document to reflect the driver change to use sbdf instead
of bdf alone.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-2-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For the MAC based integrity operation, the integrity key size (i.e.
key_mac_size) is currently set to the digest size of the used digest.
For wrapped key HMAC algorithms, the key size is independent of the
cryptographic key size. So there is no known size of the mac key in
such cases. The desired key size can optionally be specified as argument
when the dm-crypt device is configured via 'integrity_key_size:%u'.
If no integrity_key_size argument is specified, the mac key size
is still set to the digest size, as before.
Increase version number to 1.28.0 so that support for the new
argument can be detected by user space (i.e. cryptsetup).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
This commit improves documentation of the dm-delay target.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Add a new dmsetup message called config, which will return
useful configuration information for the vdo volume and
the uds index associated with it. The output is a YAML
string, and contains a version number to allow future
additions to the content.
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Add IPE's admin and developer documentation to the kernel tree.
Co-developed-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The comment in cgroup_file_write is missing some interfaces, such as
'cgroup.threads'. All delegatable files are listed in
'/sys/kernel/cgroup/delegate', so update the comment in cgroup_file_write.
Besides, add a statement that files outside the namespace shouldn't be
visible from inside the delegated namespace.
tj: Reflowed text for consistency.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Allow boot instances to use memory reserved by the reserve_mem boot
option.
reserve_mem=12M:4096:trace trace_instance=boot_mapped@trace
The above will allocate 12 megs with 4096 alignment and label it "trace".
The second parameter will create a "boot_mapped" instance and use the
memory reserved and labeled as "trace" as the memory for the ring buffer.
That will create an instance called "boot_mapped":
/sys/kernel/tracing/instances/boot_mapped
Note, because the ring buffer is using a defined memory ranged, it will
act just like a memory mapped ring buffer. It will not have a snapshot
buffer, as it can't swap out the buffer. The snapshot files as well as any
tracers that uses a snapshot will not be present in the boot_mapped
instance.
Also note that reserve_mem is not reliable in acquiring the same physical
memory at each soft reboot. It is possible that KALSR could map the kernel
at the previous boot memory location forcing the reserve_mem to return a
different memory location. In this case, the previous ring buffer will be
lost.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20240815082811.669f7d8c@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
During CSD-lock stalls, the additional information output by RCU CPU
stall warnings is usually redundant, flooding the console for not good
reason. However, this has been the way things work for a few years.
This commit therefore adds an rcutree.csd_lock_suppress_rcu_stall kernel
boot parameter that causes RCU CPU stall warnings to be abbreviated to
a single line when there is at least one CPU that has been stuck waiting
for CSD lock for more than five seconds.
To make this abbreviated message happen with decent probability:
tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 8 \
--configs "2*TREE01" --kconfig "CONFIG_CSD_LOCK_WAIT_DEBUG=y" \
--bootargs "csdlock_debug=1 rcutorture.stall_cpu=200 \
rcutorture.stall_cpu_holdoff=120 rcutorture.stall_cpu_irqsoff=1 \
rcutree.csd_lock_suppress_rcu_stall=1 \
rcupdate.rcu_exp_cpu_stall_timeout=5000" --trust-make
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
Extensible parameters support for the rkisp1 driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The call_rcu_tasks_rude() and rcu_barrier_tasks_rude() APIs are no longer.
This commit therefore removes them from the documentation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
This commit adds an stall_cpu_repeat kernel, which is also the
rcutorture.stall_cpu_repeat boot parameter, to test repeated CPU stalls.
Note that only the first stall will pay attention to the stall_cpu_irqsoff
module parameter. For the second and subsequent stalls, interrupts will
be enabled. This is helpful when testing the interaction between RCU
CPU stall warnings and CSD-lock stall warnings.
Reported-by: Rik van Riel <riel@surriel.com>
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
Properly document the function of the mgb4 output "frame_rate" sysfs
parameter and update the default DV timings values according to the latest
code changes.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
While building kernel documention using make htmldocs command, I was
getting unexpected indentation error. Single description was given for
two module parameters with wrong indentation. So, I corrected the
indentation of both parameters and the description.
Signed-off-by: Shibu kumar <shibukumar.bit@gmail.com>
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 0d815e3400e6 ("dm-crypt: limit the size of encryption requests")
|
|
The rkisp1 driver stores ISP configuration parameters in the fixed
rkisp1_params_cfg structure. As the members of the structure are part of
the userspace API, the structure layout is immutable and cannot be
extended further. Introducing new parameters or modifying the existing
ones would change the buffer layout and cause breakages in existing
applications.
The allow for future extensions to the ISP parameters, introduce a new
extensible parameters format, with a new format 4CC. Document usage of
the new format in the rkisp1 admin guide.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The vivid driver supports media controller support for quite a long
time now, so drop that from the list.
Since commit 4c4dacb052d4 ("media: vivid: loopback based on
'Connected To' controls") making EDID changes causes correct signaling
to happen, but what is still missing is the 100 ms delay required before
signaling that there is an HPD. Modify this TODO item accordingly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For some reason my finger always hits the 'r' after typing "reserve".
Fix the typo in the Documentation example.
Fixes: d9d814eebb1ae ("pstore/ramoops: Add ramoops.mem_name= command line option")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240807170029.3c1ff651@gandalf.local.home
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Setting encryption as required in security flags was broken.
For example (to require all mounts to be encrypted by setting):
"echo 0x400c5 > /proc/fs/cifs/SecurityFlags"
Would return "Invalid argument" and log "Unsupported security flags"
This patch fixes that (e.g. allowing overriding the default for
SecurityFlags 0x00c5, including 0x40000 to require seal, ie
SMB3.1.1 encryption) so now that works and forces encryption
on subsequent mounts.
Acked-by: Bharath SM <bharathsm@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add the required indentation to fix this docs build error:
Documentation/admin-guide/device-mapper/dm-crypt.rst:167: ERROR: Unexpected indentation.
Also split the documentation for read and write into separate blocks.
Signed-off-by: Shibu kumar shibukumar.bit@gmail.com
[jc: rewrote changelog]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240803183306.32425-1-shibukumar.bit@gmail.com
|
