Age | Commit message (Collapse) | Author |
|
Document support for Exynos2200. As the USBDRD 3.2 4nm controller
consists of Synopsys eUSB2.0 phy and USBDP/SS combophy, which will
be handled by external drivers, define only the bus clocked used
by the link controller.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250504144527.1723980-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the exynos2200 eUSB2 compatible. Unlike the currently documented
Qualcomm SoCs, the driver doesn't make use of reset lines for reset
control and uses more clocks.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250504144527.1723980-2-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the Rockchip RK3399 PCIe PHY to DT schema format. Move the
example to the GRF binding as that has the complete block.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250415011824.2320039-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The parameter value of below 3 properties are USB PHY specific. i.MX8MP
and i.MX95 USB PHY has different meanings. This will enlarge parameters
value and add constraints for them.
- fsl,phy-tx-vref-tune-percent
- fsl,phy-tx-rise-tune-percent
- fsl,phy-comp-dis-tune-percent
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250430094502.2723983-2-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The ticket TKT0676370 shows the description of TX_VBOOST_LVL is wrong in
register PHY_CTRL3 bit[31:29].
011: Corresponds to a launch amplitude of 1.12 V.
010: Corresponds to a launch amplitude of 1.04 V.
000: Corresponds to a launch amplitude of 0.88 V.
After updated:
011: Corresponds to a launch amplitude of 0.844 V.
100: Corresponds to a launch amplitude of 1.008 V.
101: Corresponds to a launch amplitude of 1.156 V.
This will correct it accordingly.
Fixes: b2e75563dc39 ("dt-bindings: phy: imx8mq-usb: add phy tuning properties")
Cc: stable@vger.kernel.org
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250430094502.2723983-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add device tree binding documentation for Everest ES8389 which
is different from ES8388
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250514094546.35508-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a compatible string for the MediaTek Dimensity 1200 (MT6893)
SoC: this chip integrates a MediaTek generic T-PHY version 2.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120220.147798-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for the MediaTek Dimensity 1200 (MT6893) SoC: the DSI
PHY found in this chip is fully compatible with the one found in
the MT8183 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120220.147798-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This commit documents ultra-fly-sbc devicetree binding based on
STM32MP157 SoC.
Signed-off-by: Goran Rađenović <goran.radni@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250508143818.2574558-3-goran.radni@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Ultratronik GmbH is a German electronics company:
https://www.ultratronik-ems.de/
Signed-off-by: Goran Rađenović <goran.radni@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250508143818.2574558-2-goran.radni@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The board includes an STM32H747XI SoC with the following resources:
- 2 Mbytes Flash
- 1 MByte SRAM
- LCD-TFT controller
- MIPI-DSI interface
- FD-CAN
- USB 2.0 high-speed/full-speed
- Ethernet MAC
- camera interface
Detailed information can be found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250427074404.3278732-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Convert the Rockchip RK3399 Type-C PHY to DT schema format. Add the
missing "power-domains" property and "port" and "orientation-switch"
properties in the child nodes.
Omit the previously deprecated properties as they aren't used anywhere.
Drop the 2nd example which was pretty much identical to the 1st example.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250416202419.3836688-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Cadence Torrent SERDES supports USXGMII protocol. Hence, update the
bindings to allow PHY_TYPE_USXGMII. Since PHY_TYPE_USXGMII has the value
of "12" while the existing maximum allowed PHY TYPE is "9", switch back to
using "enum" property in the bindings to account for this discontinuity.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250411055743.623135-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for type switch by pericfg register between USB3/PCIe.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250422132438.15735-5-linux@fw-web.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatible for xs-phy on mt7988.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250422132438.15735-4-linux@fw-web.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the TI DM816 AHCI SATA Controller to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The temperature sensor for maxim is a simple i2c driver,
it's eligible to trivial devices.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Link: https://lore.kernel.org/r/20250503190509.33074-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The reserved-memory.yaml reference needs the full path. No warnings were
generated because the example has the wrong compatible string, so fix
that too.
Fixes: 304a90c4f75d ("dt-bindings: soc: fsl: Convert q(b)man-* to yaml format")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507154231.1590634-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the TI OMAP2/3 interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
"ti,intc-size" property isn't actually used with "ti,omap2-intc", so the
2 bindings can be combined.
Link: https://lore.kernel.org/r/20250505144917.1294150-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the TI Wakeup Generator interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144913.1293967-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the TI Keystone 2 interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144908.1293785-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the TS-4800 FPGA interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144856.1293370-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the SPEAr3xx Shared interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144851.1293180-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Synopsys DW-APB interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144842.1292840-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the ARC-HS incore interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144834.1292666-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the ARC-HS Interrupt Distribution Unit interrupt controller
binding to schema format. It's a straight-forward conversion of the
typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144830.1292495-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Arc Core interrupt controller binding to schema format. It's
a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144826.1292329-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Qualcomm Atheros ath79 Misc interrupt controller binding to
schema format.
Adjust the compatible values to match what's actually in use.
Link: https://lore.kernel.org/r/20250505144821.1292151-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Qualcomm Atheros ath79 CPU interrupt controller binding to
schema format.
Link: https://lore.kernel.org/r/20250505144817.1291980-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell On-Die Message interrupt controller binding to
schema format.
Drop the 'interrupt-controller' property which isn't relevant for an MSI
controller.
Link: https://lore.kernel.org/r/20250505144727.1290271-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell ICU interrupt controller to DT schema format.
Add the missing addressing properties to read and translate child node
addresses.
Drop the legacy binding description and example.
Link: https://lore.kernel.org/r/20250505144524.1285795-1-robh@kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell SEI interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144749.1290862-1-robh@kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell GICP MSI controller binding to schema format. It's a
straight-forward conversion of the typical MSI controller.
Link: https://lore.kernel.org/r/20250505144721.1290068-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell 7K/8K PIC interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144715.1289866-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the TI-NSPIRE interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
'#interrupt-cells' was missing from the property list, but used in the
example, so add it.
Link: https://lore.kernel.org/r/20250505144711.1289677-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the J-Core advanced interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144707.1289503-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the ImgTec Powerdown Controller (PDC) interrupt controller
binding to schema format. It's a straight-forward conversion of the
typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144703.1289335-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Google Goldfish PIC interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144658.1289158-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the EZchip NPS interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144649.1288786-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the C-SKY Multi-processor interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144640.1288458-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the C-SKY APB interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144636.1288261-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Cirrus EP7209 interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144631.1288086-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Broadcom BCM6345 interrupt controller binding to schema
format.
The old schema indicated SoC specific compatibles should be present, but
there are none in use. So drop them.
The most number of CPUs on any platform seems to be 2, so document that
as the maximum.
Link: https://lore.kernel.org/r/20250505144622.1287712-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Arm NVIC interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144553.1286730-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Amazon FIC interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144548.1286525-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Amazaon Alpine MSIX controller binding to schema format.
Drop the interrupt-controller property as the MSIX controller doesn't
provide interrupts. The interrupt-parent property is required in this
case for custom MSI mapping properties.
Link: https://lore.kernel.org/r/20250505144543.1286351-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Abilis TB10x interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144534.1286092-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Microchip PIC32 interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250505144754.1291072-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Open PIC interrupt controller binding to schema format.
While the Linux kernel supports the "open-pic" compatible, that's not
used in any upstream .dts file. It used for "device_type" though. Add
"fsl,mpic" compatible which was not documented.
Link: https://lore.kernel.org/r/20250505144809.1291619-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Xtensa interrupt controller bindings to DT schema. Both only
vary by the compatible string, so combine them into 1 schema doc.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20250505144626.1287879-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|