summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2025-01-18dt-bindings: cpus: add a thead vlen register length propertyCharlie Jenkins
Add a property analogous to the vlenb CSR so that software can detect the vector length of each CPU prior to it being brought online. Currently software has to assume that the vector length read from the boot CPU applies to all possible CPUs. On T-Head CPUs implementing pre-ratification vector, reading the th.vlenb CSR may produce an illegal instruction trap, so this property is required on such systems. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Yangyu Chen <cyy@cyyself.name> Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-2-236c22791ef9@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-18dt-bindings: riscv: Add xtheadvector ISA extension descriptionCharlie Jenkins
The xtheadvector ISA extension is described on the T-Head extension spec Github page [1] at commit 95358cb2cca9. Link: https://github.com/T-head-Semi/thead-extension-spec/blob/95358cb2cca9489361c61d335e03d3134b14133f/xtheadvector.adoc [1] Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Yangyu Chen <cyy@cyyself.name> Link: https://lore.kernel.org/r/20241113-xtheadvector-v11-1-236c22791ef9@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-17net: ethtool: ts: add separate counter for unconfirmed one-step TX timestampsVladimir Oltean
For packets with two-step timestamp requests, the hardware timestamp comes back to the driver through a confirmation mechanism of sorts, which allows the driver to confidently bump the successful "pkts" counter. For one-step PTP, the NIC is supposed to autonomously insert its hardware TX timestamp in the packet headers while simultaneously transmitting it. There may be a confirmation that this was done successfully, or there may not. None of the current drivers which implement ethtool_ops :: get_ts_stats() also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it is a bit unclear which model to follow. But there are NICs, such as DSA, where there is no transmit confirmation at all. Here, it would be wrong / misleading to increment the successful "pkts" counter, because one-step PTP packets can be dropped on TX just like any other packets. So introduce a special counter which signifies "yes, an attempt was made, but we don't know whether it also exited the port or not". I expect that for one-step PTP packets where a confirmation is available, the "pkts" counter would be bumped. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17power: supply: max1720x: add support for reading internal and thermistor ↵Dimitri Fedrau
temperatures If enabled in the nPackCfg register, the Temp1, Temp2 and IntTemp registers contain the temperature readings from the AIN1 thermistor, AIN2 thermistor and internal die temperature respectively. Registers are shared between SBS and normal IC functions and are always readable regardless of IC settings. Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com> Link: https://lore.kernel.org/r/20250116-max1720x-temperature-v2-1-9638969d091a@liebherr.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2025-01-17regulator: dt-bindings: Add regulator-power-budget-milliwatt propertyKory Maincent
Introduce a new property to describe the power budget of the regulator. This property will allow power management support for regulator consumers like PSE controllers, enabling them to make decisions based on the available power capacity. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250115-feature_regulator_pw_budget-v2-2-0a44b949e6bc@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-17ACPI: platform_profile: Add documentationKurt Borja
Add kerneldoc and sysfs class documentation. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-19-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-17Merge branch 'for-next/perf' into for-next/coreWill Deacon
* for-next/perf: (29 commits) perf docs: arm_spe: Document new discard mode perf: arm_spe: Add format option for discard mode MAINTAINERS: Add perf list for drivers/perf/ drivers/perf: apple_m1: Map generic branch events drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association perf: imx9_perf: Introduce AXI filter version to refactor the driver and better extension perf/arm-cmn: Permit more exhaustive groups perf/dwc_pcie: Qualify RAS DES VSEC Capability by Vendor, Revision drivers/perf: hisi: Delete redundant blank line of DDRC PMU drivers/perf: hisi: Fix incorrect variable name "hha_pmu" in DDRC PMU driver drivers/perf: hisi: Export associated CPUs of each PMU through sysfs drivers/perf: hisi: Provide a generic implementation of cpumask/identifier drivers/perf: hisi: Add a common function to retrieve topology from firmware drivers/perf: hisi: Extract topology information to a separate structure drivers/perf: hisi: Refactor the detection of associated CPUs drivers/perf: hisi: Migrate to one online CPU if no associated one online drivers/perf: hisi: Don't update the associated_cpus on CPU offline drivers/perf: hisi: Define a symbol namespace for HiSilicon Uncore PMUs perf/marvell: Odyssey LLC-TAD performance monitor support perf/marvell: Refactor to extract platform data ...
2025-01-17Merge branch 'for-next/docs' into for-next/coreWill Deacon
* for-next/docs: Documentation: arm64: Remove stale and redundant virtual memory diagrams docs: arm64: Document EL3 requirements for FEAT_PMUv3 docs: arm64: Document EL3 requirements for cpu debug architecture
2025-01-17dt-bindings: usb: snps,dwc3: Split core descriptionBjorn Andersson
The Synopsys DWC3 core is found either as a standalone block or integrated with vendor glue logic. So far the latter has been described as two separate IP blocks in DeviceTree, but the two parts are not separate. In the case where the core is integrated together with vendor glue, resources such as clock and resets are often customized by the vendor, such that the standard properties doesn't make sense. Split the snps,dwc3 binding in a description of the core properties and the standard "glue" properties, in order to allow vendor bindings to inherit the core properties. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250113-dwc3-refactor-v3-1-d1722075df7b@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-17Merge branch kvm-arm64/misc-6.14 into kvmarm-master/nextMarc Zyngier
* kvm-arm64/misc-6.14: : . : Misc KVM/arm64 changes for 6.14 : : - Don't expose AArch32 EL0 capability when NV is enabled : : - Update documentation to reflect the full gamut of kvm-arm.mode : behaviours : : - Use the hypervisor VA bit width when dumping stacktraces : : - Decouple the hypervisor stack size from PAGE_SIZE, at least : on the surface... : : - Make use of str_enabled_disabled() when advertising GICv4.1 support : : - Explicitly handle BRBE traps as UNDEFINED : . KVM: arm64: Explicitly handle BRBE traps as UNDEFINED KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe() arm64: kvm: Introduce nvhe stack size constants KVM: arm64: Fix nVHE stacktrace VA bits mask Documentation: Update the behaviour of "kvm-arm.mode" KVM: arm64: nv: Advertise the lack of AArch32 EL0 support Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-17Merge branch kvm-arm64/nv-timers into kvmarm-master/nextMarc Zyngier
* kvm-arm64/nv-timers: : . : Nested Virt support for the EL2 timers. From the initial cover letter: : : "Here's another batch of NV-related patches, this time bringing in most : of the timer support for EL2 as well as nested guests. : : The code is pretty convoluted for a bunch of reasons: : : - FEAT_NV2 breaks the timer semantics by redirecting HW controls to : memory, meaning that a guest could setup a timer and never see it : firing until the next exit : : - We go try hard to reflect the timer state in memory, but that's not : great. : : - With FEAT_ECV, we can finally correctly emulate the virtual timer, : but this emulation is pretty costly : : - As a way to make things suck less, we handle timer reads as early as : possible, and only defer writes to the normal trap handling : : - Finally, some implementations are badly broken, and require some : hand-holding, irrespective of NV support. So we try and reuse the NV : infrastructure to make them usable. This could be further optimised, : but I'm running out of patience for this sort of HW. : : [...]" : . KVM: arm64: nv: Fix doc header layout for timers KVM: arm64: nv: Document EL2 timer API KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity KVM: arm64: nv: Sanitise CNTHCTL_EL2 KVM: arm64: nv: Propagate CNTHCTL_EL2.EL1NV{P,V}CT bits KVM: arm64: nv: Add trap routing for CNTHCTL_EL2.EL1{NVPCT,NVVCT,TVT,TVCT} KVM: arm64: Handle counter access early in non-HYP context KVM: arm64: nv: Accelerate EL0 counter accesses from hypervisor context KVM: arm64: nv: Accelerate EL0 timer read accesses when FEAT_ECV in use KVM: arm64: nv: Use FEAT_ECV to trap access to EL0 timers KVM: arm64: nv: Publish emulated timer interrupt state in the in-memory state KVM: arm64: nv: Sync nested timer state with FEAT_NV2 KVM: arm64: nv: Add handling of EL2-specific timer registers Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-17Merge branches 'arm/smmu/updates', 'arm/smmu/bindings', 'qualcomm/msm', ↵Joerg Roedel
'rockchip', 'riscv', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
2025-01-16Merge tag 'trace-v6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix a regression in the irqsoff and wakeup latency tracing The function graph tracer infrastructure has become generic so that fprobes and BPF can be based on it. As it use to only handle function graph tracing, it would always calculate the time the function entered so that it could then calculate the time it exits and give the length of time the function executed for. But this is not needed for the other users (fprobes and BPF) and reading the clock adds a non-negligible overhead, so the calculation was moved into the function graph tracer logic. But the irqsoff and wakeup latency tracers, when the "display-graph" option was set, would use the function graph tracer to calculate the times of functions during the latency. The movement of the calltime calculation made the value zero for these tracers, and the output no longer showed the length of time of each tracer, but instead the absolute timestamp of when the function returned (rettime - calltime where calltime is now zero). Have the irqsoff and wakeup latency tracers also do the calltime calculation as the function graph tracer does and report the proper length of the function timings. - Update the tracing display to reflect the new preempt lazy model When the system is configured with preempt lazy, the output of the trace data would state "unknown" for the current preemption model. Because the lazy preemption model was just added, make it known to the tracing subsystem too. This is just a one line change. - Document multiple function graph having slightly different timings Now that function graph tracer infrastructure is separate, this also allows the function graph tracer to run in multiple instances (it wasn't able to do so before). If two instances ran the function graph tracer and traced the same functions, the timings for them will be slightly different because each does their own timings and collects the timestamps differently. Document this to not have people be confused by it. * tag 'trace-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ftrace: Document that multiple function_graph tracing may have different times tracing: Print lazy preemption model tracing: Fix irqsoff and wakeup latency tracers when using function graph
2025-01-17dt-bindings: serial: 8250: Add SpacemiT K1 uart compatibleYixun Lan
Found SpacemiT's K1 uart controller is compatible with Intel's Xscale uart, but it's still worth to introduce a new compatible. Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17dt-bindings: interrupt-controller: Add SpacemiT K1 PLICYangyu Chen
Add compatible string for SpacemiT K1 PLIC. Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17dt-bindings: timer: Add SpacemiT K1 CLINTYangyu Chen
Add compatible string for SpacemiT K1 CLINT. Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17dt-bindings: riscv: add SpacemiT K1 bindingsYangyu Chen
Add DT binding documentation for the SpacemiT K1 SoC[1] and the Banana Pi BPi-F3 board[2] which used it. Link: https://www.spacemit.com/en/spacemit-key-stone-2/ [1] Link: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 [2] Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17dt-bindings: riscv: Add SpacemiT X60 compatiblesYangyu Chen
The X60 is RISC-V CPU cores from SpacemiT and currently used in their K1 SoC. Link: https://www.spacemit.com/en/spacemit-x60-core/ Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-16dt-bindings: PCI: fsl,imx6q-pcie: Add Refclk for i.MX95 RCRichard Zhu
Previous Refclk of i.MX95 PCIe RC is on when system boot to kernel. But boot firmware change the behavior, it is off when boot. So it must be turned on when it is used. Also it needs be turned off/on for suspend and resume. Add one Refclk for i.MX95 PCIe RC. Increase clocks' maxItems to 5 and keep the same restriction with other compatible string. Link: https://lore.kernel.org/r/20241126075702.4099164-2-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-01-16dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-epFrank Li
Add new compatible string fsl,imx8q-pcie-ep for iMX8Q. The 'reg-names' property only needs 'dbi' and 'addr_space' because the others are located at a default offset. The new 'clock-names' property aligns with the Root Complex (RC) naming. Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-5-c4bfa5193288@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2025-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c 1f691a1fc4be ("r8169: remove redundant hwmon support") 152d00a91396 ("r8169: simplify setting hwmon attribute visibility") https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command") f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref") drivers/net/ethernet/intel/ice/ice_type.h 50327223a8bb ("ice: add lock to protect low latency interface") dc26548d729e ("ice: Fix quad registers read on E825") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16Documentation: Fix x86_64 UEFI outdated references to eliloNir Lichtman
Problem: The x86_64 UEFI doc references Elilo which is an unmaintained/orphaned bootloader project. Also, on x86_64 a bootloader is technically not actually required since there is support for the Linux EFI stub. Solution: Remove the references to Elilo from the doc and refer to the EFI stub doc page, update steps accordingly, and add more details about creation of the EFI partition to improve clarity. Signed-off-by: Nir Lichtman <nir@lichtman.org> Link: https://lore.kernel.org/r/20250108113522.GA897677@lichtman.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2025-01-16Documentation/sysctl: Add timer_migration to kernel.rstPhil Auld
There is no mention of timer_migration in the docs. Add a short description. Signed-off-by: Phil Auld <pauld@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20250114190525.169022-1-pauld@redhat.com
2025-01-16docs/mm: Physical memory: Remove zone_tI Hsin Cheng
"zone_t" doesn't exist in current code base anymore, remove the description of it. Signed-off-by: I Hsin Cheng <richard120310@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20250115070355.41769-1-richard120310@gmail.com
2025-01-16Merge tag 'pm-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Update the documentation of cpuidle governors that does not match the code any more after previous functional changes (Rafael Wysocki) and fix up the cpufreq Kconfig file broken inadvertently by a previous update (Viresh Kumar)" * tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Move endif to the end of Kconfig file cpuidle: teo: Update documentation after previous changes cpuidle: menu: Update documentation after previous changes
2025-01-16Merge tag 'amlogic-drivers-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic drivers changes for v6.14: - Document the System Control registers found on early Meson SoC * tag 'amlogic-drivers-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: Document the System Control registers found on early Meson SoC Link: https://lore.kernel.org/r/d22513cc-c326-443c-982b-78adf755d3dc@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16tracing: Cache ":mod:" events for modules not loaded yetSteven Rostedt
When the :mod: command is written into /sys/kernel/tracing/set_event (or that file within an instance), if the module specified after the ":mod:" is not yet loaded, it will store that string internally. When the module is loaded, it will enable the events as if the module was loaded when the string was written into the set_event file. This can also be useful to enable events that are in the init section of the module, as the events are enabled before the init section is executed. This also works on the kernel command line: trace_event=:mod:<module> Will enable the events for <module> when it is loaded. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250116143533.514730995@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-16tracing: Add :mod: command to enabled module eventsSteven Rostedt
Add a :mod: command to enable only events from a given module from the set_events file. echo '*:mod:<module>' > set_events Or echo ':mod:<module>' > set_events Will enable all events for that module. Specific events can also be enabled via: echo '<event>:mod:<module>' > set_events Or echo '<system>:<event>:mod:<module>' > set_events Or echo '*:<event>:mod:<module>' > set_events The ":mod:" keyword is consistent with the function tracing filter to enable functions from a given module. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/20250116143533.214496360@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-16Merge tag 'qcom-arm64-for-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.14 This adds support for the new Snapdragon 8 Elite platform with MTP and QRD boards, QCS615 platform with the Ride board, QCS8300 platform with its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2 Gen1 Smart Viewer Development Kit. On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added. The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit 2023 are introduced. IPQ9574 gains PCIe and TRNG descriptions, together with a few other smaller improvements. TRNG is also enabled on the IPQ5332 platform. On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB interrupts are corrected. On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development kit gains description of the onboard LEDs. On QRB4210 RB2 support for HDMI audio playback is added. SA8775P gains missing clock controllers, CPUs are tied to PSCI power domains, DisplayPort is introduced and enabled on the Ride board. On SDM670 the GPU components are described and enabled for Google Pixel 3a, together with camera clock controller and flash LED. Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled. "global" IRQ for PCIe RC controllers are described on SM8550 and SM8650, to allow for hotplug events. Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615, and QCS8300. The X Elite platform gains QUP power domains and OPPs, another PCIe controller, another UART, and its SDHCI controllers. The ASUS Vivobook S 15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains audio configuration, SD card reader support, and USB retimers. The Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains retimers described. The Lenovo Thinkpad T14s has additional USB ports enabled, as well as sound and fingerprint sensor. USB U1/U2 entry is disabled across a variety of platforms, to improve USB stability. sleep clock frequencies are reviewed and corrected for a variety of platforms, so is also various remoteproc mmio address ranges. * tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits) arm64: dts: qcom: x1e80100-romulus: Update firmware nodes arm64: dts: qcom: msm8916-samsung-serranove: Add display panel arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: Remove unused and undocumented properties arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes arm64: dts: qcom: pmi8950: add LAB-IBB nodes arm64: dts: qcom: ipq5424: enable the download mode support arm64: dts: qcom: ipq5424: add scm node arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts arm64: dts: qcom: qcs8300-ride: Enable USB controllers arm64: dts: qcom: qcs8300: Add support for usb nodes arm64: dts: qcom: qcs8300: Add support for clock controllers arm64: dts: qcom: sm8450: Add coresight nodes arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions arm64: dts: qcom: qcs615-ride: Enable UFS node arm64: dts: qcom: qcs615: add UFS node arm64: dts: qcom: ipq5424: Add USB controller and phy nodes ... Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'v6.14-rockchip-dts64-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2 (SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM), Orange Pi 5 Max. A interesting case is the Radxa E52C using a soc called rk3582. This is rk3588-variant where some cpu cores are disabled during production and the bootloader needs to read the available cores from efuses and adapt the DT it hands over to the kernel. New supported peripherals are just the naneng combophy + the usb controllers using them on the rk3576 as well as the arm,smmu attached to the PCI controller on rk3588. And finally there are of course a number of board-specific enablements and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi 5+ etc. * tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits) arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM dt-bindings: arm: rockchip: Add Firefly ITX-3588J board arm64: dts: rockchip: Add Orange Pi 5 Max board dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi arm64: dts: rockchip: add WLAN to rk3588-evb1 controller arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes arm64: dts: rockchip: enable hdmi out audio on wolfvision pf5 arm64: dts: rockchip: fix num-channels property of wolfvision pf5 mic arm64: dts: rockchip: Enable the USB 3.0 port on NanoPi R6C/R6S arm64: dts: rockchip: Add FRAM MB85RS128TY to rk3568-mecsbc arm64: dts: rockchip: Remove unused i2c2 node from rk3568-mecsbc arm64: dts: rockchip: Fix PCIe3 handling for Edgeble-6TOPS Modules arm64: dts: rockchip: Add Radxa E52C dt-bindings: arm: rockchip: Add Radxa E52C arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2 dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2 arm64: dts: rockchip: Enable USB 3.0 ports on orangepi-5-plus arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC ... Link: https://lore.kernel.org/r/2193001.3Lj2Plt8kZ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'ti-k3-dt-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.14 Generic Fixups/Cleanups: - Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties for ethernet phy - Clock description added to ICSS-G SoC Specific features and Fixes: - Duplicate GICR reg defines in am62x/am62ax - Mailbox nodes are enabled at board level bringing AM67/j722s/am62p to same behavior as other K3 SoCs. - Introduction of deep-sleep state defines for pinctrl header AM62Ax - Enable ti-sysc for wkup_uart0 AM64: - Switch ICSSG clock to core clock. J7200: - Disable SPI1 loopback default. J784s4: - Clock ID fix for McSPI instances - Use j7200-padconf compatibility for padconf to enable suspend-to-ram support. Board Specific: AM62 - phyboard - hdmi bridge regulator and using 16bit input for hdmi bridge, vcc-supply for i2c eeprom - SK - SoC wakeup using USB1, Add bootph property around cpsw mac syscon node, M4 mailbox node redefinition fixup. - BeaglePlay: Fix ethernet phy reset time AM64 - hummingboard-t: Convert PCIE/USB overlays to independent dts. j7200: - EVM: fix typo in overlay name. j721e: - EVM: overlay for pcie1 endpoint mode. j722s: - EVM: Add mcu_i2c0 support for expansion pins., Add USB0 DFU support, Enable PMIC - AM67a-beagley-ai: Add remote proc nodes j784s4: - AM69-SK/ j784s4-EVM - Mark PMIC regulators with bootph-all property to indicate ones that are needed through boot phases. - AM69-sk: PIC0 Endpoint mode overlay, USB Superspeed mode. * tag 'ti-k3-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (31 commits) arm64: dts: ti: k3-am62a-wakeup: Configure ti-sysc for wkup_uart0 arm64: dts: ti: k3-j722s-evm: Enable PMIC arm64: dts: ti: k3-am69-sk: Add USB SuperSpeed support arm64: dts: ti: k3-am625-beagleplay: Fix DP83TD510E reset time arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts arm64: dts: ti: k3-am69-sk: Add overlay for PCIE0 Endpoint Mode arm64: dts: ti: k3-am68-sk-base-board: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: Makefile: Fix typo "k3-j7200-evm-pcie1-ep.dtbo" arm64: dts: ti: k3-j7200: Add node to disable loopback connection arm64: dts: ti: k3-j784s4: Use ti,j7200-padconf compatible arm64: dts: ti: k3-am62p-j722s-common-main: Enable USB0 for DFU boot arm64: dts: ti: k3-am62a: Remove duplicate GICR reg arm64: dts: ti: k3-am62: Remove duplicate GICR reg arm64: dts: ti: k3-am67a-beagley-ai: Add remote processor nodes arm64: dts: ti: k3-am62p: Enable Mailbox nodes at the board level arm64: dts: ti: k3-am625-sk: Remove M4 mailbox node redefinition arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0 arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties ... Link: https://lore.kernel.org/r/20250110210812.bdpypzvmg6s6sr5t@itinerary Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615Sayali Lokhande
Document the Universal Flash Storage(UFS) Host Controller on the Qualcomm QCS615 Platform. Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Co-developed-by: Xin Liu <quic_liuxin@quicinc.com> Signed-off-by: Xin Liu <quic_liuxin@quicinc.com> Link: https://lore.kernel.org/r/20241216095439.531357-2-quic_liuxin@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-16dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindingsVaradarajan Narayanan
Update dt-bindings to add IPQ5424 to USB DWC3 controller list. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20241118052839.382431-6-quic_varada@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-16Merge tag 'arm-soc/for-6.14/devicetree-arm64' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 6.14: - Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5) - Rob removes some undocumented properties - Same ensures that the CFE stub area is reserved to allow secondary CPUs to be successfully brought up in Linux, also making sure that the address used in the spin table is also carved out. Finally he adds support for the Zyxel EX3510-B router using BCM4906 - Rosen converts the BCM4908 platforms to use the more flexible nvmem-layout representation * tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: bcm4908: nvmem-layout conversion arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906 arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area arm64: dts: broadcom: Remove unused and undocumented properties arm64: dts: broadcom: Add DT for D-step version of BCM2712 arm64: dts: broadcom: Add display pipeline support to BCM2712 arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT Link: https://lore.kernel.org/r/20250109224756.3632025-2-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'arm-soc/for-6.14/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree updates for 6.14, please pull the following: - Rob removes some unused and undocumented properties pertaining to the SPI flash controller on Broadcom boards - Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO, MDIO, LED controller, DMA and then proceeds with adding support for the GEnexsis XG6846B PON router - Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform * tag 'arm-soc/for-6.14/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: meraki-mr26: set mac address for gmac0 ARM: dts: broadcom: Add Genexis XG6846B DTS file dt-bindings: arm: bcmbca: Add Genexis XG6846B dt-bindings: vendor-prefixes: Add Genexis ARM: dts: bcm6846: Add ARM PL081 DMA block ARM: dts: bcm6846: Add LED controller ARM: dts: bcm6846: Add MDIO control block ARM: dts: bcm6846: Add GPIO blocks ARM: dts: bcm6846: Enable watchdog ARM: dts: bcm6846: Add iproc rng arm: dts: broadcom: Remove unused and undocumented properties Link: https://lore.kernel.org/r/20250109224756.3632025-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'sunxi-dt-for-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner Device Tree changes for 6.14 - Add support for DMA engine and audio codec on F1C100s and enable audio codec on Lichee Pi Nano - Add syscon and SRAM nodes for A100 - Enable CPU DVFS for Tanix TX1 - Explicitly configure TCON0 pixel clock parent according to display output used This includes one commit shared with the clock tree dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI which adds the macros for the TCON0 pixel clock parents. * tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0 dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI arm64: dts: allwinner: h313: enable DVFS for Tanix TX1 arm64: dts: allwinner: a100: Add syscon nodes dt-bindings: sram: sunxi-sram: Add A100 compatible ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano ARM: dts: suniv: f1c100s: Add support for Audio Codec ARM: dts: suniv: f1c100s: Add support for DMA Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'mtk-dts64-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt MediaTek ARM64 DeviceTree updates for v6.14 This adds a few cleanups, enhances support for upstreamed SoCs and machines, other than adding new ones. In particular, fixes and improvements: - MT8516 gets a few fixes for GICv2, Watchdog and I2C, and support for the Keypad controller; - MT8390 Genio 700 board gets basic audio support; - MT8365 gets an alias for its integrated ethernet controller; - MT8195 gets an important fix for system suspend: all of the machines based on this SoC and its IoT variant can now properly perform PM Suspend to RAM; - MT8188 gets support for its Mali GPU with DVFS and a fix for the OVL Hardware found in the Display Controller using the right compatible strings; - MT8186 Chromebooks can now suspend properly thanks to a fix moving the USB wakeups from XHCI to MTU3 (USB) controller; - MT8183 Chromebooks get a fix for their DMIC microphone and proper support for their second-source touchscreen; - MT7988 SoC and the BananaPi R4 board gets support for Pinctrl, eMMC/SD, Thermal, CPU DVFS, PCI-Express, and peripherals like the RT5190A PMIC, PCA9545 I2C mux, and others; - MT7986 BananaPi R3 board gets support for SATA power socket; And cleanups: - Dropped regulator-compatible property from MediaTek DTs; - Aligned thermal node names with bindings on MT8183 Kukui; - MT6397 PMIC get proper sub-node names, fixing dt validation; - The property enabling Wake-On-Lan feature changed in all of the boards and driver to match the actual meaning of it (mediatek,mac-wol now enables wol on mac instead of phy); - Compatibles for MediaTek PMIC Keypad are added to bindings and can now pass dts validation; ...and the newly added machines are: - MT8188 (Ciri) Lenovo Chromebook Duet - MT8186 (Starmie) ASUS Chromebook Enterprise CM30 - MT8186 (Chinchou) ASUS Chromebook CZ12 and CZ12 Flip * tag 'mtk-dts64-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (71 commits) arm64: dts: mediatek: mt8516: add keypad node arm64: dts: mediatek: add per-SoC compatibles for keypad nodes dt-bindings: mediatek,mt6779-keypad: add more compatibles arm64: dts: mediatek: mt8365-evk: Set ethernet alias dts: arm64: mediatek: mt8195: Remove MT8183 compatible for OVL dts: arm64: mediatek: mt8188: Update OVL compatible from MT8183 to MT8195 dt-bindings: display: mediatek: ovl: Modify rules for MT8195/MT8188 dt-bindings: display: mediatek: ovl: Add compatible strings for MT8188 MDP3 dt-bindings: arm: mediatek: Drop MT8192 Chromebook variants that never shipped arm64: dts: mediatek: mt8192: Drop Chromebook variants that never shipped arm64: dts: mediatek: mt7988a-bpi-r4: Add proc-supply for cpus arm64: dts: mediatek: mt7988a-bpi-r4: Add MediaTek MT6682A/RT5190A PMIC arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4 arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1 arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart ... Link: https://lore.kernel.org/r/20250108100826.32458-1-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'at91-dt-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.14 This update includes: - power monitor support for the SAM9X75 Curiosity board (using the PAC1934 device) - fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1 EK and SAMA5D29 Curiosity boards) - partial support for the SAMA7D65 SoC - cleanups * tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodes ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodes ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node ARM: dts: at91: Add sama7d65 pinmux dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity ARM: dts: microchip: sam9x75_curiosity: Add power monitor support ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi Link: https://lore.kernel.org/r/20250107081424.758980-2-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'renesas-dts-for-v6.14-tag2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.14 (take two) - Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II EVK development board, - Add Image Signal Processor helper block (FCPVX and VSPX) support for the R-Car V4H SoC, - Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders arm64: dts: renesas: r8a779g0: Add VSPX instances arm64: dts: renesas: r8a779g0: Add FCPVX instances arm64: dts: renesas: r9a09g047e57-smarc: Add SCIF pincontrol arm64: dts: renesas: r9a09g047: Add pincontrol node arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros dt-bindings: pinctrl: renesas: Document RZ/G3E SoC dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H Link: https://lore.kernel.org/r/cover.1736180859.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'sti-dt-for-v6.14-round1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt Add and enable MALI400 support for STiH410-b2260 * tag 'sti-dt-for-v6.14-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: st: enable the MALI gpu on the stih410-b2260 ARM: dts: st: add node for the MALI gpu on stih410.dtsi dt-bindings: gpu: mali-utgard: Add st,stih410-mali compatible Link: https://lore.kernel.org/r/f44cb1f0-4d91-4e25-8b1f-3dd9a7bed62b@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'imx-bindings-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX dt-bindings change for 6.14: - Add compatibles for i.MX8MP based SoM and carrier from ABB * tag 'imx-bindings-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add ABB SoM and carrier Link: https://lore.kernel.org/r/20250105095139.714590-2-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'icc-6.14-rc1' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Pull interconnect changes from Georgi: interconnect changes for 6.14 This pull request contains the interconnect changes for the 6.14-rc1 merge window. It contains one new driver and DT documentation updates for L3 and bandwidth monitors. Driver changes: - New driver for the SM8750 platform - Add DT compatibles for QCS615 BWMON and SM8650 OSM Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc: dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles interconnect: sm8750: Add missing const to static qcom_icc_desc interconnect: qcom: Add interconnect provider driver for SM8750 dt-bindings: interconnect: add interconnect bindings for SM8750
2025-01-16Merge tag 'iio-fixes-for-6.13b' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Merge from Jonathan: IIO: 2nd set of fixes for the 6.13 cycle. Given timing so late in cycle and that they are all confined to specific drivers, it is fine for these to go upstream early in the 6.14 cycle. hid-sensors - Handle processed attention channel rather than just returning an error. adi,ad3552r - Fix output ranges for ad3541r and ad3542r. - Clear the reset status flag so that we can pick up any resets during operation. adi,ad5791 - Fix a misleading dt binding example where the sense of the interrupt was reversed. adi,ad7606 - Fix some hard coded offsets that should be taking the number of channels on a particular part into account. These were missed due to some racing changes. ams,as73211 - Fix an off by one in optimized path for just reading the colour channels. bosch,bme680 - Fix type of variable passed as pointer, ensuring it works on big endian systems and doesn't expose uninitialized data. * tag 'iio-fixes-for-6.13b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: dac: ad3552r-hs: clear reset status flag iio: dac: ad3552r-common: fix ad3541/2r ranges iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw() iio: light: as73211: fix channel handling in only-color triggered buffer dt-bindings: iio: dac: ad5791: ldac gpio is active low iio: hid-sensor-prox: Fix invalid read_raw for attention iio: adc: ad7606: Fix hardcoded offset in the ADC channels
2025-01-16drm: xlnx: zynqmp_dpsub: Fix kernel docTomi Valkeinen
Fix two kernel doc warnings introduced by the recent DP audio patch: - Add a doc line for the new "audio" field - Remove a reference to zynqmp_dpsub.c from zynqmp.rst, as the .c file no longer has structured comments Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support") Closes: https://lore.kernel.org/all/20241220154208.720d990b@canb.auug.org.au/ Reviewed-by: Vishal Sagar <vishal.sagar@amd.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241220-xilinx-dp-audio-doc-fix-v1-1-cc488996e463@ideasonboard.com (cherry picked from commit 96b5d2e807f667320c66f41ddc1c473023a73ab2) Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-01-16KVM: arm64: nv: Fix doc header layout for timersMarc Zyngier
Stephen reports that 'make htmldocs' spits out a warning ("Documentation/virt/kvm/devices/vcpu.rst:147: WARNING: Definition list ends without a blank line; unexpected unindent."). Fix it by keeping all the timer attributes on a single line. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-16dt-bindings: pinctrl: sunxi: add compatible for V853Andras Szemzo
Add compatible strings for V853 family pinctrl. Signed-off-by: Andras Szemzo <szemzo.andras@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/20250110123923.270626-3-szemzo.andras@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-01-15dt-bindings: clock: st,stm32-rcc: support spread spectrum clockingDario Binacchi
The addition of DT bindings for enabling and tuning spread spectrum clocking generation is available only for the main PLL of stm32f{4,7} platforms. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114182021.670435-3-dario.binacchi@amarulasolutions.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-15dt-bindings: clock: convert stm32 rcc bindings to json-schemaDario Binacchi
The patch converts st,stm32-rcc.txt to the JSON schema, but it does more than that. The old bindings, in fact, only covered the stm32f{4,7} platforms and not the stm32h7. Therefore, to avoid patch submission tests failing, it was necessary to add the corresponding compatible (i. e. st,stm32h743-rcc) and specify that, in this case, 3 are the clocks instead of the 2 required for the stm32f{4,7} platforms. Additionally, the old bindings made no mention of the st,syscfg property, which is used by both the stm32f{4,7} and the stm32h7 platforms. The patch also fixes the files referencing to the old st,stm32-rcc.txt. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114182021.670435-2-dario.binacchi@amarulasolutions.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-15net: ethtool: add support for configuring hds-threshTaehee Yoo
The hds-thresh option configures the threshold value of the header-data-split. If a received packet size is larger than this threshold value, a packet will be split into header and payload. The header indicates TCP and UDP header, but it depends on driver spec. The bnxt_en driver supports HDS(Header-Data-Split) configuration at FW level, affecting TCP and UDP too. So, If hds-thresh is set, it affects UDP and TCP packets. Example: # ethtool -G <interface name> hds-thresh <value> # ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256 # ethtool -g enp14s0f0np0 Ring parameters for enp14s0f0np0: Pre-set maximums: ... HDS thresh: 1023 Current hardware settings: ... TCP data split: on HDS thresh: 256 The default/min/max values are not defined in the ethtool so the drivers should define themself. The 0 value means that all TCP/UDP packets' header and payload will be split. Tested-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250114142852.3364986-3-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15dt-bindings: power: supply: max17042: add max77705 supportDzmitry Sankouski
Add max77705 fuel gauge support. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Link: https://lore.kernel.org/r/20250108-starqltechn_integration_upstream-v14-2-f6e84ec20d96@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
generated by cgit (git 2.34.1) at 2025-07-18 21:34:08 +0000