summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2025-05-22Merge tag 'wireless-next-2025-05-22' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Lots of new things, notably: * ath12k: monitor mode for WCN7850, better 6 GHz regulatory * brcmfmac: SAE for some Cypress devices * iwlwifi: rework device configuration * mac80211: scan improvements with MLO * mt76: EHT improvements, new device IDs * rtw88: throughput improvements * rtw89: MLO, STA/P2P concurrency improvements, SAR * tag 'wireless-next-2025-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (389 commits) wifi: mt76: mt7925: add rfkill_poll for hardware rfkill wifi: mt76: support power delta calculation for 5 TX paths wifi: mt76: fix available_antennas setting wifi: mt76: mt7996: fix RX buffer size of MCU event wifi: mt76: mt7996: change max beacon size wifi: mt76: mt7996: fix invalid NSS setting when TX path differs from NSS wifi: mt76: mt7996: drop fragments with multicast or broadcast RA wifi: mt76: mt7996: set EHT max ampdu length capability wifi: mt76: mt7996: fix beamformee SS field wifi: mt76: remove capability of partial bandwidth UL MU-MIMO wifi: mt76: mt7925: add test mode support wifi: mt76: mt7925: extend MCU support for testmode wifi: mt76: mt7925: ensure all MCU commands wait for response wifi: mt76: mt7925: refine the sniffer commnad wifi: mt76: mt7925: prevent multiple scan commands wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init() wifi: mt76: mt7996: Fix null-ptr-deref in mt7996_mmio_wed_init() wifi: mt76: mt7925: add RNR scan support for 6GHz wifi: mt76: add mt76_connac_mcu_build_rnr_scan_param routine wifi: mt76: scan: Fix 'mlink' dereferenced before IS_ERR_OR_NULL check ... ==================== Link: https://patch.msgid.link/20250522165501.189958-50-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-22Merge tag 'for-net-next-2025-05-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: core: - Add support for SIOCETHTOOL ETHTOOL_GET_TS_INFO - Separate CIS_LINK and BIS_LINK link types - Introduce HCI Driver protocol drivers: - btintel_pcie: Do not generate coredump for diagnostic events - btusb: Add HCI Drv commands for configuring altsetting - btusb: Add RTL8851BE device 0x0bda:0xb850 - btusb: Add new VID/PID 13d3/3584 for MT7922 - btusb: Add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: Implement host-wakeup feature * tag 'for-net-next-2025-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits) Bluetooth: btintel: Check dsbr size from EFI variable Bluetooth: MGMT: iterate over mesh commands in mgmt_mesh_foreach() Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922 Bluetooth: btusb: use skb_pull to avoid unsafe access in QCA dump handling Bluetooth: L2CAP: Fix not checking l2cap_chan security level Bluetooth: separate CIS_LINK and BIS_LINK link types Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925 Bluetooth: add support for SIOCETHTOOL ETHTOOL_GET_TS_INFO Bluetooth: btintel_pcie: Dump debug registers on error Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields Bluetooth: ISO: Fix not using SID from adv report Revert "Bluetooth: btusb: add sysfs attribute to control USB alt setting" Revert "Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL" Bluetooth: btusb: Add HCI Drv commands for configuring altsetting Bluetooth: Introduce HCI Driver protocol Bluetooth: btnxpuart: Implement host-wakeup feature dt-bindings: net: bluetooth: nxp: Add support for host-wakeup Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850 Bluetooth: hci_uart: Remove unnecessary NULL check before release_firmware() Bluetooth: btmtksdio: Fix wakeup source leaks on device unbind ... ==================== Link: https://patch.msgid.link/20250522171048.3307873-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-22cgroup, docs: cpu controller's interaction with various scheduling policiesShashank Balaji
The cpu controller interface files account for or affect processes differently based on their scheduling policy, and the underlying scheduler used (fair-class vs. BPF scheduler). Document these differences Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-05-22sched_ext, docs: convert mentions of "CFS" to "fair-class scheduler"Shashank Balaji
Mentions of CFS are stale since the fair-class scheduler is implemented using EEVDF. So, convert such mentions to "fair-class scheduler" to stay algorithm-name agnostic. Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-05-22cgroup, docs: convert space indentation to tab indentationShashank Balaji
The paragraphs on cpu.uclamp.{min,max} are space indented. Convert them to tab indentation to make them uniform with the other paragraphs. Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-05-22Merge tag 'asoc-v6.16' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v6.16 The changes in this release are quite large, mainly in drivers rather than the core. This is partly due to cleanups that touch a lot of drivers and partly due to several relatively large new drivers. - Support for automatically enumerating DAIs from standards conforming SoundWire SDCA devices, further work is required for these to be useful in an actual card. - Conversion of quite a few drivers to newer GPIO APIs. - More helpers and cleanups from Mormimoto-san. - Support for a wider range of AVS platforms. - Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32, Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
2025-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc8). Conflicts: 80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X") 4bcc063939a5 ("ice, irdma: fix an off by one in error handling code") c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers") https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au No extra adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-22Merge tag 'icc-6.16-rc1' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 6.16 This pull request contains the interconnect changes for the 6.16-rc1 merge window. The core and driver changes are listed below. Core changes: - Add support for dynamic id allocation, that allows creating multiple instances of the same provider Driver changes: - Add driver for the EPSS L3 instances on SA8775P SoC - Add QoS support for SM8650 SoC - Add some missing nodes for SM8650 - Misc dt-binding style and indentation fixes Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sm8650: remove regmap config for mc_virt & clk_virt interconnect: qcom: sm8650: add the MASTER_APSS_NOC dt-bindings: interconnect: sm8650: document the MASTER_APSS_NOC interconnect: qcom: sm8650: enable QoS configuration dt-bindings: interconnect: Correct indentation and style in DTS example interconnect: qcom: sa8775p: Add dynamic icc node id support interconnect: qcom: icc-rpmh: Add dynamic icc node id support interconnect: qcom: Add multidev EPSS L3 support interconnect: core: Add dynamic id allocation support dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
2025-05-22Merge tag 'net-6.15-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "This is somewhat larger than what I hoped for, with a few PRs from subsystems and follow-ups for the recent netdev locking changes, anyhow there are no known pending regressions. Including fixes from bluetooth, ipsec and CAN. Current release - regressions: - eth: team: grab team lock during team_change_rx_flags - eth: bnxt_en: fix netdev locking in ULP IRQ functions Current release - new code bugs: - xfrm: ipcomp: fix truesize computation on receive - eth: airoha: fix page recycling in airoha_qdma_rx_process() Previous releases - regressions: - sched: hfsc: fix qlen accounting bug when using peek in hfsc_enqueue() - mr: consolidate the ipmr_can_free_table() checks. - bridge: netfilter: fix forwarding of fragmented packets - xsk: bring back busy polling support in XDP_COPY - can: - add missing rcu read protection for procfs content - kvaser_pciefd: force IRQ edge in case of nested IRQ Previous releases - always broken: - xfrm: espintcp: remove encap socket caching to avoid reference leak - bluetooth: use skb_pull to avoid unsafe access in QCA dump handling - eth: idpf: - fix null-ptr-deref in idpf_features_check - fix idpf_vport_splitq_napi_poll() - eth: hibmcge: fix wrong ndo.open() after reset fail issue" * tag 'net-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits) octeontx2-af: Fix APR entry mapping based on APR_LMT_CFG octeontx2-af: Set LMT_ENA bit for APR table entries net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done octeontx2-pf: Avoid adding dcbnl_ops for LBK and SDP vf selftests/tc-testing: Add an HFSC qlen accounting test sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue() idpf: fix idpf_vport_splitq_napi_poll() net: hibmcge: fix wrong ndo.open() after reset fail issue. net: hibmcge: fix incorrect statistics update issue xsk: Bring back busy polling support in XDP_COPY can: slcan: allow reception of short error messages net: lan743x: Restore SGMII CTRL register on resume bnxt_en: Fix netdev locking in ULP IRQ functions MAINTAINERS: Drop myself to reviewer for ravb driver net: dwmac-sun8i: Use parsed internal PHY address instead of 1 net: ethernet: ti: am65-cpsw: Lower random mac address error print to info can: kvaser_pciefd: Continue parsing DMA buf after dropped RX can: kvaser_pciefd: Fix echo_skb race can: kvaser_pciefd: Force IRQ edge in case of nested IRQ idpf: fix null-ptr-deref in idpf_features_check ...
2025-05-22Merge tag 'coresight-next-v6.16' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Suzuki writes: coresight: updates for Linux v6.16 CoreSight self-hosted trace driver subsystem updates for Linux v6.16 includes: - Clear CLAIM tags on device probe if self-hosted tags are set. - Support for perf AUX pause/resume for CoreSight ETM PMU driver, with trace collection at pause. - Miscellaneous fixes for the subsystem Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (27 commits) coresight: prevent deactivate active config while enabling the config coresight: holding cscfg_csdev_lock while removing cscfg from csdev coresight/etm4: fix missing disable active config coresight: etm4x: Fix timestamp bit field handling coresight: tmc: fix failure to disable/enable ETF after reading Documentation: coresight: Document AUX pause and resume coresight: perf: Update buffer on AUX pause coresight: tmc: Re-enable sink after buffer update coresight: perf: Support AUX trace pause and resume coresight: etm4x: Hook pause and resume callbacks coresight: Introduce pause and resume APIs for source coresight: etm4x: Extract the trace unit controlling coresight: cti: Replace inclusion by struct fwnode_handle forward declaration coresight: Disable MMIO logging for coresight stm driver coresight: replicator: Fix panic for clearing claim tag coresight: Add a KUnit test for coresight_find_default_sink() coresight: Remove extern from function declarations coresight: Remove inlines from static function definitions coresight: Clear self hosted claim tag on probe coresight: etm3x: Convert raw base pointer to struct coresight access ...
2025-05-22Merge branches 'ib-firmware-mfd-6.16', 'ib-mfd-clocksource-pwm-6.16', ↵Lee Jones
'ib-mfd-gpio-nvmem-6.16', 'ib-mfd-regulator-6.16' and 'ib-mfd-regulator-6.16-1' into ibs-for-mfd-merged
2025-05-22Merge tag 'iio-for-6.16a-take2' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: New device support, features and cleanup for 6.16 - take 2 Note - last minute rebase was to drop a typo patch that I'd accidentally picked up (in the microblaze arch Kconfig) Take 2 is due to that rebase messing up some fixes tags that were referring to patches after that point. There is a known merge conflict due to changes in neighbouring lines. Stephen's resolution in linux-next is: https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/ Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those who have been doing much of this work for some time. Lars-Peter is removed from the entry having moved on to other topics. Thanks Nuno, David and Andy for stepping up and Lars-Peter for all your hard work in the past! Includes the usual mix of new device support, features and general cleanup. This time we also have some tree wide changes. - Rip out the iio_device_claim_direct_scoped() as it proved hard to work with. This series includes quite a few related cleanups such as use of guard or factoring code out to allow direct returns. - Switch from iio_device_claim/release_direct_mode() to new iio_device_claim/release_direct() which is structured so that sparse can warn on failed releases. There were a few false positives but those were mostly in code that benefited from being cleaned up as part of this process. - Introduce iio_push_to_buffers_with_ts() to replace the _timestamp() version over time. This version takes the size of the supplied buffer which the core checks is at least as big as expected by calculation from channel descriptions of those channels enabled. Use this in an initial set of drivers. - Add macros for IIO_DECLARE_BUFFER_WITH_TS() and IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure correctly aligned buffers for timestamps being added onto the end of channel data. New device support ------------------ adi,ad3530r - New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with programmable gain controls. R variants have internal references. adi,ad7476 - Add support (dt compatible only) for the Rohm BU79100G ADC which is fully compatible with the ti,ads7866. adi,ad7606 - Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic channel information allocation. adi,ad7380 - Add support for the AD7389-4 dfrobot,sen0322 - New driver for this oxygen sensor. mediatek,mt2701-auxadc - Add binding for MT6893 which is fully compatible with already supported MT8173. meson-saradc - Support the GXLX SoCs. Mostly this is a workaround for some unrelated clock control bits found in the ADC register map. nuvoton,nct7201 - New driver for NCT7201 and NCT7202 I2C ADCs. rohm,bd79124 - New driver for this 12-bit, 8-channel SAR ADC. - Switch to new set_rv etc gpio callbacks that were added in 6.15. rohm,bd79703 - Add support for BD79700, BD79701 and BD79702 DACs that have subsets of functionality of the already supported bd79703. Included making this driver suitable for support device variants. st,stm32-lptimer - Add support for stm32pm25 to this trigger. Features -------- Beyond IIO - Property iterator for named children. core - Enable writes for 64 bit integers used for standard IIO ABI elements. Previously these could be read only. - Helper library that should avoid code duplication for simpler ADC bindings that have a child node per channel. - Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true and simplifies code on all significant architectures) core/backend - Add support to control source of data - useful when the HDL includes things like generated ramps for testing purposes. Enable this for adi-axi-dac adi,ad3552-hs - Add debugfs related callbacks to allow debug access to register contents. adi,ad4000 - Support SPI offload with appropriate FPGA firmware along with improving documentation. adi,ad7293 - Add support for external reference voltage. adi,ad7606 - Support SPI offload. adi,ad7768-1 - Support reset GPIO. adi,admv8818 - Support filter frequencies beyond 2^32. adi,adxl345 - Add single and double tap events. hid-sensor-prox - Support 16-bit report sizes as seen on some Intel platforms. invensense,icm42600 - Enable use of named interrupts to avoid problems with some wiring choices. Get the interrupt by name, but fallback to previous assumption on the first being INT1 if no names are supplied. microchip,mcp3911 - Add reset gpio support. rohm,bh7150 - Add reset gpio support. st,stm32 - Add support to control oversampling. ti,adc128s052 - Add support for ROHM BD79104 which is early compatible with the TI parts already supported by this driver. Includes some general driver cleanup and a separate dt binding. - Simplify reference voltage handling by assuming it is fixed after enabling the supply. winsen,mhz19b - New driver for this C02 sensor. Cleanup and minor fixes ----------------------- dt-bindings - Correct indentation and style for DTS examples. - Use unevalutateProperties for SPI devices instead of additionalProperties to allow generic SPI properties from spi-peripheral-props.yaml ABI Docs - Add missing docs for sampling_frequency when it applies only to events. Treewide - Various minor tweaks, comment fixes and similar. - Sort TI ADCs in Kconfig that had gotten out of order. - Switch various drives that provide GPIO chip functionality to the new callbacks with return values. - Standardize on { } formatting for all array sentinels. - Make use of aligned_s64 in a few places to replace either wrong types or manually defined equivalents. - Drop places where spi bits_per_word is set to 8 because that is the default anyway. adi,ad_sigma_delta library - Avoid a potential use of uninitialized data if reg_size has a value that is not supported (no drivers hit this but it is reasonable hardening) adi,ad4030 - Add error checking for scan types and no longer store it in state. - Rework code to reduce duplication. - Move setting the mode from buffer preenable() to update_scan_mode(), better matching expected semantics of the two different callbacks. - Improve data marshalling comments. adi,ad4695 - Use u16 for buffer elements as oversampling is not yet supported except with SPI offload (which doesn't use this path). adi,ad5592r - Clean up destruction of mutexes. - Use lock guards to simplify code (later patch fixes a missed unlock) adi,ad5933 - Correct some incorrect settling times. adi,ad7091 - Deduplicate handling of writable vs volatile registers as they are the inverse of each other for this device. adi,ad7124 - Fix 3db Filter frequency. - Remove ability to directly write the filter frequency (which was broken) - Register naming improvements. adi,ad7606 - Add a missing return value check. - Fill in max sampling rates for all chips. - Use devm_mutex_init() - Fix up some kernel-doc formatting issues. - Remove some camel case that snuck in. - Drop setting address field in channels as easily established from other fields. - Drop unnecessary parameter to ad76060_scale_setup_cb_t. adi,ad7768-1 - Convert to regmap. - Factor out buffer allocation. - Tidy up headers. adi,ad7944 - Stop setting bits_per_word in SPI xfers with no data. adi,ad9832 - Add of_device_id table rather than just relying on fallbacks. - Use FIELD_PREP() to set values of fields. adi,admv1013 - Cleanup a pointless ternary. adi,admv8818 - Fix up LPF Band 5 frequency which was slightly wrong. - Fix an integer overflow. - Fix range calculation adi,adt7316 - Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler irq_get_trigger_type() adi,adxl345 - Use regmap cache instead of various state variables that were there to reduce bus accesses. - Make regmap return value checking consistent across all call sites. adi,axi-dac - Add a check on number of channels (0 to 15 valid) allwinner,sun20i - Use new adc-helpers to replace local parsing code for channel nodes. bosch,bmp290 - Move to local variables for sensor data marshalling removing the need for a messy definition that has to work for all supported parts. Follow up fix adds a missing initialization. dynaimage,al3010 and dynaimage,al3320a - Various minor cleanup to bring these drivers inline with reviewed feedback given on a new driver. - Fix an error path in which power down is not called when it should be. - Switch to regmap. google,cros_ec - Fix up a flexible array in middle of structure warning. - Flush fifo when changing the timeout to avoid potential long wait for samples. hid-sensor-rotation - Remove an __aligned(16) marking that doesn't seem to be justified. kionix,kxcjk-1013 - Deduplicate code for setting up interrupts. microchip,mcp3911 - Fix handling of conversion results register which differs across supported devices. idt,zopt2201 - Avoid duplicating register lists as all volatile registers are the inverse of writeable registers on this device. renesas,rzg2l - Use new adc-helpers to replace local parsing code for channel nodes. ti,ads1298 - Fix a missing Kconfig dependency. * tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits) dt-bindings: iio: adc: Add ROHM BD79100G iio: adc: add support for Nuvoton NCT7201 dt-bindings: iio: adc: add NCT7201 ADCs iio: chemical: Add driver for SEN0322 dt-bindings: trivial-devices: Document SEN0322 iio: adc: ad7768-1: reorganize driver headers iio: bmp280: zero-init buffer iio: ssp_sensors: optimalize -> optimize HID: sensor-hub: Fix typo and improve documentation iio: admv1013: replace redundant ternary operator with just len iio: chemical: mhz19b: Fix error code in probe() iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros iio: make IIO_DMA_MINALIGN minimum of 8 bytes iio: pressure: zpa2326_spi: remove bits_per_word = 8 iio: pressure: ms5611_spi: remove bits_per_word = 8 ...
2025-05-22Add Tegra264 support in AHUB driversMark Brown
Merge series from "Sheetal ." <sheetal@nvidia.com>: The patch series includes the necessary changes to enable support for the Tegra264 platforms in AHUB drivers.
2025-05-22net: Add support for providing the PTP hardware source in tsinfoKory Maincent
Multi-PTP source support within a network topology has been merged, but the hardware timestamp source is not yet exposed to users. Currently, users only see the PTP index, which does not indicate whether the timestamp comes from a PHY or a MAC. Add support for reporting the hwtstamp source using a hwtstamp-source field, alongside hwtstamp-phyindex, to describe the origin of the hardware timestamp. Remove HWTSTAMP_SOURCE_UNSPEC enum value as it is not used at all. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250519-feature_ptp_source-v4-1-5d10e19a0265@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-22dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yamlChaoyi Chen
Convert cdn-dp-rockchip.txt to yaml. Add new "port@1" property which represents the CDN DP output to keep the same style as the other display interfaces. This patch also changes the constraints for "phys" and "extcon". For the original binding, only one phy and the corresponding extcon can be specified. In the new binding, one or two phys can be specified. Since the RK3399 has two DP-USB PHYs, specifying one allows output via the corresponding PHY, while specifying two lets the driver choose one PHY for output. This rule also applies to extcon, which provides the cable state for the corresponding PHY. Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250520024718.142-3-kernel@airkyi.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-05-22dt-bindings: ASoC: Document Tegra264 APE supportSheetal
Add Tegra264 compatible strings to APE subsystem device bindings: - audio-graph-card: Due to different PLL clock rate. - admaif: Due to 32 channels supported and register offset changes. - i2s: Due to 32 channels supported and register offset changes. - amx/adx: Due to 32 channels supported and register offset changes. - asrc: Due to different ARAM address. - ahub: Due to AHUB IPs number of instances updates. - for future proofing the T264 compatibility is added for other device nodes. These bindings enable the enhanced audio features of Tegra264 while maintaining compatibility with existing platforms. Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250512051747.1026770-3-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-22dt-bindings: ASoC: admaif: Add missing propertiesSheetal
Add optional interconnect and iommu properties to admaif yaml. These properties are supported from Tegra186 SoC onwards. This fixes below dtbs_check error for Tegra194 and Tegra234: 'interconnect-names', 'interconnects', 'iommus' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Sheetal <sheetal@nvidia.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://patch.msgid.link/20250512051747.1026770-2-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-22dt-bindings: mfd: brcm,bcm59056: Add compatible for BCM59054Artur Weber
The BCM59054 MFD is fairly similar to the BCM59056, and will use the same driver. Add compatible and specify the allowed regulator nodes. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/20250515-bcm59054-v9-2-14ba0ea2ea5b@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-05-22dt-bindings: mfd: brcm,bcm59056: Convert to YAMLArtur Weber
Convert devicetree bindings for the Broadcom BCM59056 PMU MFD from TXT to YAML format. This patch does not change any functionality; the bindings remain the same. The bindings have been split into two parts: the MFD binding and a separate binding for the regulator node, to simplify the addition of other models later (which have different regulators). Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/20250515-bcm59054-v9-1-14ba0ea2ea5b@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-05-22ASoC: dt-bindings: audio-graph-card2: reference audio-graph routing propertyKuninori Morimoto
audio-graph.yaml already has "routing" property, let's reference it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/875xi4axln.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-22dt-bindings: leds: Add Texas Instruments TPS6131x flash LED driverMatthias Fend
Document Texas Instruments TPS61310/TPS61311 flash LED driver devicetree bindings. Signed-off-by: Matthias Fend <matthias.fend@emfend.at> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250514-leds-tps6131x-v5-1-a4fb9e7f2c47@emfend.at Signed-off-by: Lee Jones <lee@kernel.org>
2025-05-22erofs: add 'fsoffset' mount option to specify filesystem offsetSheng Yong
When attempting to use an archive file, such as APEX on android, as a file-backed mount source, it fails because EROFS image within the archive file does not start at offset 0. As a result, a loop or a dm device is still needed to attach the image file at an appropriate offset first. Similarly, if an EROFS image within a block device does not start at offset 0, it cannot be mounted directly either. To address this issue, this patch adds a new mount option `fsoffset=x' to accept a start offset for the primary device. The offset should be aligned to the block size. EROFS will add this offset before performing read requests. Signed-off-by: Sheng Yong <shengyong1@xiaomi.com> Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250517090544.2687651-1-shengyong1@xiaomi.com [ Gao Xiang: minor update on documentation and the error message. ] Reviewed-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2025-05-21hinic3: module initialization and tx/rx logicFan Gong
This is [1/3] part of hinic3 Ethernet driver initial submission. With this patch hinic3 is a valid kernel module but non-functional driver. The driver parts contained in this patch: Module initialization. PCI driver registration but with empty id_table. Auxiliary driver registration. Net device_ops registration but open/stop are empty stubs. tx/rx logic. All major data structures of the driver are fully introduced with the code that uses them but without their initialization code that requires management interface with the hw. Co-developed-by: Xin Guo <guoxin09@huawei.com> Signed-off-by: Xin Guo <guoxin09@huawei.com> Signed-off-by: Fan Gong <gongfan1@huawei.com> Co-developed-by: Gur Stavi <gur.stavi@huawei.com> Signed-off-by: Gur Stavi <gur.stavi@huawei.com> Link: https://patch.msgid.link/76a137ffdfe115c737c2c224f0c93b60ba53cc16.1747736586.git.gur.stavi@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21docs: bcachefs: add casefolding referenceKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-21docs: bcachefs: idle work scheduling design docKent Overstreet
People have been asking to see the plan for this, so - bcachefs has various background tasks that need to be scheduled to balance efficiency, predictability of performance, etc. The design and philosophy hasn't changed too much since bcache, which was primarily designed for server usage, with sustained load in mind. These days we're seeing more desktop usage - where we really want to let the system idle effictively, to reduce total power usage - while also still balancing previous concerns, we still want to let work accumulate to a degree. This lays out all the requirements and starts to sketch out the algorithm I have in mind. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-21dt-bindings: net: Document support for Aeonsemi PHYsChristian Marangi
Add Aeonsemi PHYs and the requirement of a firmware to correctly work. Also document the max number of LEDs supported and what PHY ID expose when no firmware is loaded. Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1, AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1, AS21210PB1 that all register with the PHY ID 0x7500 0x9410 on C45 registers before the firmware is loaded. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://patch.msgid.link/20250517201353.5137-7-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-22Merge tag 'qcom-arm64-for-6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm Arm64 DeviceTree updates for v6.16 Support for CPU frequency scaling is enabled on the X Elite platform. Also on X Elite, support for the HP EliteBook Ultra G1q is introduced. Support for the QCS6490 RB3gen2 Industrial Mezzanine is also added. PCIe controllers and PHYs are described and enabled across IPQ5018, IPQ5332, and IPQ5424. On IPQ9474 the missing MHI register range is added. The TCSR block is described and used to enable download mode flags on IPQ5018. The venus video encoder/decoder is enabled on the MSM8998-based Lenovo Miix 630 laptop. The crypto engine is enabled on QCM2290 and QCS615. Bluetooth is enabled on the QCM2210-based RB1 board. The Fairphone FP5 gains Displayport sound support. SAR2130P display nodes are added. On 8cx Gen3 the sensor remoteproc (SLPI) is introduced and this is enabled on Lenovo Thinkpad X13s and the CRD. The SDM845-based Samsung Galaxy S9 gains graphics, modem and initial sound support. On SDX75 the QPIC BAM and NAND support is added, and these are enabled on the IDP board. LLCC is added for SM8750. SM8550 gains Iris video decoder support. For X Elite, Lenovo ThinkPad T14s support for the SDX62 modem, as well as audio headset, is added. ASUS Vivobook S 15 gains Bluetooth support, Microsoft Surface Laptop 7 models gets support for DP over USB Type-C, HP Omnibook X 14 gains audio support. The devkit gets the USB multiport controller and the two USB Type-A ports described. Additionally a variety of Devicetree fixes are introduced, primarily identified through binding validation. * tag 'qcom-arm64-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (58 commits) arm64: dts: qcom: sm4450: Add RPMh power domains support arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: add retimers, dp altmode support arm64: dts: qcom: ipq5424: Enable PCIe PHYs and controllers arm64: dts: qcom: ipq5424: Add PCIe PHYs and controller nodes arm64: dts: qcom: sc7280: Mark FastRPC context banks as dma-coherent arm64: dts: qcom: sdx75-idp: Enable QPIC BAM & QPIC NAND support arm64: dts: qcom: sdx75: Add QPIC NAND support arm64: dts: qcom: sdx75: Add QPIC BAM support arm64: dts: qcom: qcm2290: Add crypto engine arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties arm64: dts: qcom: qcs615: Fix up UFS clocks arm64: dts: qcom: sa8775p: Clean up the PSCI PDs arm64: dts: qcom: msm8996-oneplus: Add SLPI VDD_PX arm64: dts: qcom: sm6350-pdx213: Wire up USB regulators arm64: dts: qcom: msm8998-yoshino: Add QUSB2PHY VDD supply arm64: dts: qcom: msm8998-mtp: Add QUSB2PHY VDD supply arm64: dts: qcom: msm8998-fxtec: Add QUSB2PHY VDD supply arm64: dts: qcom: qcs615: Remove disallowed property from AOSS_QMP node arm64: dts: qcom: msm8998: Remove mdss_hdmi_phy phandle argument ... Link: https://lore.kernel.org/r/20250520024248.38904-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'mtk-dts64-for-v6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt Additional MediaTek ARM64 DTS updates for v6.16 This addresses devicetree binding warnings happening on the MDP3 nodes in mt8188 dts, reverts the commit adding the SCP firmware-name as strongly suggested by Arnd, and also adds some more late commits. In particular: - MT6359 PMIC - Renamed PMIC RTC node to fix dtbs_check warning - MT7988(A) - Support for SPI controllers was added to SoC and BPI-R4 - Support for XSPHY, USB and PCIe2 was added as well - Fan and cooling maps were added to BPI-R4 machine - Added BananaPi R4 2G5 machine variant - MT8365 - Added touchscreen support to MT8365 Genio EVK - MT8188 - Addressed dtbs_check warnings for MDP3 nodes - MT8390 (Genio) - Reverted SCP firmware-name addition * tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits) Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0" arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes arm64: dts: mt6359: Rename RTC node to match binding expectations arm64: dts: mt8365-evk: Add goodix touchscreen support arm64: dts: mediatek: mt8188: Add missing #reset-cells property arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi arm64: dts: mediatek: mt7988: add spi controllers arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2 arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4 dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant arm64: dts: mt6359: Add missing 'compatible' property to regulators node arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight ... Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'v6.16-rockchip-dts64-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board. New boards: - Cobra and PP1516 from Theobroma-Systems (build around the PX30) - Radxa Rock 5B+ (rk3588) - Rockchip RK3399 industrial eval board New peripherals: - GMAC + SDMMC/SDIO on rk3528 - SAI + HDMI-audio on rk3576 Interesting general updates: - move rk3528 i2c + uart aliases as requested - rk3568 PCIe3 MSI to use GIC ITS - update deprecated dwmac reset properties on some px30 boards - updates for cypress usb hubs on some Theobroma boards Binding taken with Greg's blessing https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/ * tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits) arm64: dts: rockchip: Improve LED config for NanoPi R5S arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems arm64: dts: rockchip: add px30-cobra base dtsi and board variants dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck arm64: dts: rockchip: add basic mdio node to px30 arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma dt-bindings: usb: cypress,hx3: Add support for all variants arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588 arm64: dts: rockchip: Add RK3562 evb2 devicetree arm64: dts: rockchip: add core dtsi for RK3562 SoC dt-bindings: arm: rockchip: Add rk3562 evb2 board dt-bindings: soc: rockchip: Add rk3562 syscon compatibles dt-bindings: rockchip: pmu: Add rk3562 compatible arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C arm64: dts: rockchip: Add GMAC nodes for RK3528 ... Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'sunxi-dt-for-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner device tree changes for 6.16 Introduce Allwinner A523 / A527 / T527 SoC family w/ three new devices: - Radxa Cubie A5E - X96Q-Pro+ - Avaota-A1 Also enable EMAC0 ethernet MAC on A523 family for Cubie A5E & Avaota-A1. Note: the SoC has two different ethernet controllers. Changes to existing SoCs: - Enable GPU on H616 with all boards enabled - Set maximum MMC frequency for the A100 Changes to existing boards: - Add WiFi/BT header on PINE64 A64 boards - Add hp-det-gpios for Anbernic RG35XX - Add support for PHY LEDs on Bananapi (the original one) Add new devices for existing SoCs: - YuzukiHD Chameleon based on H6 - Liontron H-A133L based on A133 (compatible with A100) Tree wide cleanups: - Use preferred node names for cooling maps - Align wifi node name with bindings - Drop spurious 'clock-latency-ns' properties for H5 & H6 * tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits) arm64: dts: allwinner: a100: add Liontron H-A133L board support dt-bindings: arm: sunxi: Add Liontron H-A133L board name dt-bindings: vendor-prefixes: Add Liontron name ARM: dts: bananapi: add support for PHY LEDs arm64: dts: allwinner: a100: set maximum MMC frequency arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC dt-bindings: sram: sunxi-sram: Add A523 compatible arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard arm64: dts: allwinner: a64: Add WiFi/BT header on PINE A64 arm64: dts: allwinner: correct the model name for Radxa Cubie A5E ARM: dts: allwinner: Align wifi node name with bindings arm64: dts: allwinner: Align wifi node name with bindings arm64: dts: allwinner: h616: enable Mali GPU for all boards arm64: dts: allwinner: h616: Add Mali GPU node arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties arm/arm64: dts: allwinner: Use preferred node names for cooling maps arm64: dts: allwinner: h616: add YuzukiHD Chameleon support ... Link: https://lore.kernel.org/r/aCaeZJ2t4S_xhgjp@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'stm32-dt-for-v6.16-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.16, round 1 Highlights: ---------- - MCU: - Add low power timer on STM32F746 - Add STM32H747 High end MCU support. It embeds: - dual-core (Cortex-M7 + Cortex-M4) - up to 2 Mbytes flash - 1 Mbyte of internal RAM - Add STM32H747i-disco board support. Detailed information can be found at: https://www.st.com/en/evaluation-tools/stm32h747i-disco.html - MPU: - STM32MP13: - Add VREFINT calibration support based on ADC. - STMP32MP15: - Add new Ultratronik Fly board support: - based on STM32MP157C SoC - 1GB of DDR3 - Several connections are available on this boards: 2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART, SDcard, RJ45, ... - STM32MP25: - Add OCTOSPI support on STM32MP25 SoCs - Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1 - Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use LPTIM3 as low power broadcast timer on STM32MP257F-EV1. * tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits) ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding dt-bindings: vendor-prefixes: Add Ultratronik arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1 arm64: dts: st: add low-power timer nodes on stm32mp251 arm64: defconfig: enable STM32 LP timer clockevent driver arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi arm64: dts: st: Add OMM node on stm32mp251 ARM: dts: stm32: support STM32h747i-disco board ARM: dts: stm32: add an extra pin map for USART1 on stm32h743 ARM: dts: stm32: add pin map for UART8 controller on stm32h743 ARM: dts: stm32: add uart8 node for stm32h743 MCU dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK ARM: stm32: add a new SoC - STM32H747 dt-bindings: arm: stm32: add compatible for stm32h747i-disco board ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles ARM: dts: st: stm32: Align wifi node name with bindings ARM: dts: stm32: add low power timer on STM32F746 ... Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux ↵Arnd Bergmann
into soc/dt RISC-V SpacemiT DT changes for 6.16 - Add clock driver, fix for pinctrl/uart - Add gpio support, enable LED heartbeat * tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux: riscv: dts: spacemit: add gpio LED for system heartbeat riscv: dts: spacemit: add gpio support for K1 SoC riscv: dts: spacemit: Acquire clocks for UART riscv: dts: spacemit: Acquire clocks for pinctrl riscv: dts: spacemit: Add clock tree for SpacemiT K1 dt-bindings: clock: spacemit: Add spacemit,k1-pll dt-bindings: soc: spacemit: Add spacemit,k1-syscon Link: https://lore.kernel.org/r/20250514044841-GYA524674@gentoo Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'dt-vt8500-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt VT8500 DTS ARM changes for v6.16 1. New board: VIA APC Rock/Paper. 2. Add SCC ID register/socinfo node. 3. List all timer interrupts. * tag 'dt-vt8500-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: vt8500: list all four timer interrupts ARM: dts: vt8500: add DT nodes for the system config ID register ARM: dts: vt8500: Add VIA APC Rock/Paper board dt-bindings: arm: vt8500: Add VIA APC Rock/Paper boards Link: https://lore.kernel.org/r/20250513104216.25803-5-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'qcom-arm64-for-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.16 The Snapdragon X Plus platform and related reference device is introduced. Devicetree for the Xiaomi Redmi Note 8 is added. Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains 1.2GHz and 1.5GHz CPU frequencies. The IPQ5424 gains MMC, LEDs and buttons, while the IPQ9574 gains NSS clock controller and SPI NAND support. IPQ6018 SMEM is transitioned to be described directly in the reserved-memory node. Display and GPU are enabled in the QCM6490-based Fairphone FP5. On QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and Bluetooth is enabled. The USB Type-C orientation GPIO is added on the QCS6490 Rb3Gen2 and the vision mezzanine is described. The Fairphone FP5 gains touchscreen and USB Type-C display support, and the QCM6490 IDP board gains a required listed of protected clocks. The camera subsystem in SC7280 is described and UFS is transitioned to use operating points. On MSM8916, MSM8919 and MSM8939, and devices on these platforms, the UART pinctrl state is cleaned up. The MSM8953 platform gains another UART and interconnects. On SA8775P CTCU and ETR nodes are added, and the CPUfreq throttling interrupts are added. Samsung Galaxy S9 SM-G9600 gains a description of the MAX77705 used for charging, fuel gauge, haptic, and LED, as well as the PMIC used for display and touchscreen, which then is used to enable the touchscreen. The LPG/PWM node is added to PM8937 and Xiaomi Redmi 5A gains display backlight control. Display and GPU are enabled for the Nothing Phone (1). QCS615 platform gains command DB definition. The QCS8300 platform gains description of more QUP instances, CPUfreq, PCIe SMMU and the SPMI controller. On SAR2130P PCIe EP device nodes are added. On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem is enabled, and firmware-path are defined on ADSP and WCNSS. The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP enabled, and the vision mezzanine on both gets their CMA configuration cleaned up. Xiaomi Pocophone F1 gains touchscreen support. On the SM7325 Nothing Phone (1), display, GPU, and camera EEPROMs are described. On SM8450 the PCIe endpoint controller is described. For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh sleep stats. SM8650 gians OSM L3 scaling and variety of OPP tables and missing interconnect definitions. The thermal trip points for CPU cores and GPU are raised in reliance on hardware throttling. SM8650 is also transitioned to per-CPU interrupt partitions, in order to properly describe the PMU interrupts. Missing Coresight ETE instances are added. On SM8750 the cluster idle states are corrected, then audio and compute DSPs are introduced, together with the crypto and rng blocks. Modem support is added and enabled on MTP and QRD devices. On SC8280XP overlays are introduced for those running Linux at EL2 on these devices. A few more temp-alarm instances are added for the PMICs. On the X Elite platform GPU cooling and watchdog is introduced, together with a number of smaller fixes. Dell XPS13 gains support for USB Type-C display, the QCP gains WiFi/BT power sequence, and a few devices learns about HBR3. The RTC support is enabled and regulators that are feeding resources that should be always on is marked as such on a variety of boards. The Lenovo Thinkpad T14s DeviceTree is split in two, in order to describe the LCD and OLED variants. Missing properties for the crypto BAM is introduced on a variety of platforms, taking care of a long standing error message in the kernel log during boot. DSI phy clock ids are transitioned to use identifiers from the PHY header file and VBIF region size is corrected, across a large number of platforms. A couple of DWC3 quirks are added across a lot of platforms. The arm32-for-6.15 pull request was accidentally merged into the arm64-for-6.16 branch and this wasn't discovered until a significant number of commits would have to be rebased. As such this is kept here as well. * tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (308 commits) arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes arm64: dts: qcom: qcs8300: add the pcie smmu node arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override arm64: dts: qcom: msm8953: Add interconnects arm64: dts: qcom: msm8953: Add uart_5 arm64: dts: qcom: sm8350: Use q6asm defines for reg arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg arm64: dts: qcom: sdm850*: Use q6asm defines for reg arm64: dts: qcom: sdm845*: Use q6asm defines for reg arm64: dts: qcom: sc7280: Use q6asm defines for reg arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg arm64: dts: qcom: msm8996*: Use q6asm defines for reg arm64: dts: qcom: msm8953: Use q6asm defines for reg arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch ... Link: https://lore.kernel.org/r/20250511235241.15192-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'qcom-drivers-for-6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for v6.16 Allow HP EliteBook Ultra G1q to use QSSECOM for UEFI variable acecss. Add missing compatible for IPQ5018 TCSR block. Fix a kernel-doc warning in SCM driver. * tag 'qcom-drivers-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: docs: firmware: qcom_scm: Fix kernel-doc warning firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 Link: https://lore.kernel.org/r/20250520024916.39712-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'riscv-cache-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V cache drivers for v6.16 SiFive: Add support for the Eswin EIC7700 SoC, which needs to make sure of the non-standard cache-ops provided by the ccache driver. Bindings: Conversions for two Marvell bindings to yaml, and additions of two soc-specific compatibles to the axm45mp bindings. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-cache-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: dt-bindings: cache: add QiLai compatible to ax45mp dt-bindings: cache: Convert marvell,tauros2-cache to DT schema dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema dt-bindings: cache: add specific RZ/Five compatible to ax45mp cache: sifive_ccache: Add ESWIN EIC7700 support dt-bindings: cache: sifive,ccache0: Add ESWIN EIC7700 SoC compatibility Link: https://lore.kernel.org/r/20250516-liability-facility-667fc14a2a85@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'samsung-drivers-6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers Samsung SoC drivers for v6.16, part two Add CPU hotplug support on Google GS101 by toggling respective bits in secondary PMU intr block (Power Management Unit (PMU) Interrupt Generation) from the main PMU driver. * tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation Link: https://lore.kernel.org/r/20250516082037.7248-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21cpufreq: CPPC: Add support for autonomous selectionLifeng Zheng
Add sysfs interfaces for CPPC autonomous selection in the cppc_cpufreq driver. Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Reviewed-by: Sumit Gupta <sumitg@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://patch.msgid.link/20250507031941.2812701-1-zhenglifeng1@huawei.com [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-21netlink: specs: tc: add qdisc dump to TC specJakub Kicinski
Hook TC qdisc dump in the TC qdisc get, it only supported doit until now and dumping will be used by the sample code. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-12-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21netlink: specs: tc: drop the family name prefix from attrsJakub Kicinski
All attribute sets and messages are prefixed with tc-. The C codegen also adds the family name to all structs. We end up with names like struct tc_tc_act_attrs. Remove the tc- prefixes to shorten the names. This should not impact Python as the attr set names are never exposed to user, they are only used to refer to things internally, in the encoder / decoder. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21netlink: specs: tc: add C naming infoJakub Kicinski
Add naming info needed by C code gen. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21netlink: specs: tc: use tc-gact instead of tc-gen as struct nameJakub Kicinski
There is a define in the uAPI header called tc_gen which expands to the "generic" TC action fields. This helps other actions include the base fields without having to deal with nested structs. A couple of actions (sample, gact) do not define extra fields, so the spec used a common tc-gen struct for both of them. Unfortunately this struct does not exist in C. Let's use gact's (generic act's) struct for basic actions. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21netlink: specs: tc: remove duplicate nestsJakub Kicinski
tc-act-stats-attrs and tca-stats-attrs are almost identical. The only difference is that the latter has sub-message decoding for app, rather than declaring it as a binary attr. tc-act-police-attrs and tc-police-attrs are identical but for the TODO annotations. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250520161916.413298-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21dt-bindings: spi: samsung: add exynosautov920-spi compatibleFaraz Ata
Add "samsung,exynosautov920-spi" dedicated compatible for SPI found in ExynosAutov920 SoC. Signed-off-by: Faraz Ata <faraz.ata@samsung.com> Link: https://patch.msgid.link/20250521084324.2759530-1-faraz.ata@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-21mailmap: update and consolidate Casey Connolly's name and emailCasey Connolly
I've used several email addresses and a previous name to contribute. Consolidate all of these to my primary email and update my name. Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org Signed-off-by: Casey Connolly <casey.connolly@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-21kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_countMax Kellermann
Expose a simple counter to userspace for monitoring tools. Link: https://lkml.kernel.org/r/20250504180831.4190860-3-max.kellermann@ionos.com Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Cc: Core Minyard <cminyard@mvista.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Joel Granados <joel.granados@kernel.org> Cc: Kees Cook <kees@kernel.org> Cc: Song Liu <song@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-21kernel/watchdog: add /sys/kernel/{hard,soft}lockup_countMax Kellermann
Patch series "sysfs: add counters for lockups and stalls", v2. Commits 9db89b411170 ("exit: Expose "oops_count" to sysfs") and 8b05aa263361 ("panic: Expose "warn_count" to sysfs") added counters for oopses and warnings to sysfs, and these two patches do the same for hard/soft lockups and RCU stalls. All of these counters are useful for monitoring tools to detect whether the machine is healthy. If the kernel has experienced a lockup or a stall, it's probably due to a kernel bug, and I'd like to detect that quickly and easily. There is currently no way to detect that, other than parsing dmesg. Or observing indirect effects: such as certain tasks not responding, but then I need to observe all tasks, and it may take a while until these effects become visible/measurable. I'd rather be able to detect the primary cause more quickly, possibly before everything falls apart. This patch (of 2): There is /proc/sys/kernel/hung_task_detect_count, /sys/kernel/warn_count and /sys/kernel/oops_count but there is no userspace-accessible counter for hard/soft lockups. Having this is useful for monitoring tools. Link: https://lkml.kernel.org/r/20250504180831.4190860-1-max.kellermann@ionos.com Link: https://lkml.kernel.org/r/20250504180831.4190860-2-max.kellermann@ionos.com Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Cc: Cc: Core Minyard <cminyard@mvista.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Joel Granados <joel.granados@kernel.org> Cc: Song Liu <song@kernel.org> Cc: Kees Cook <kees@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-21x86/crash: pass dm crypt keys to kdump kernelCoiby Xu
1st kernel will build up the kernel command parameter dmcryptkeys as similar to elfcorehdr to pass the memory address of the stored info of dm crypt key to kdump kernel. Link: https://lkml.kernel.org/r/20250502011246.99238-8-coxu@redhat.com Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Jan Pazdziora <jpazdziora@redhat.com> Cc: Liu Pingfan <kernelfans@gmail.com> Cc: Milan Broz <gmazyland@gmail.com> Cc: Ondrej Kozina <okozina@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-21crash_dump: reuse saved dm crypt keys for CPU/memory hot-pluggingCoiby Xu
When there are CPU and memory hot un/plugs, the dm crypt keys may need to be reloaded again depending on the solution for crash hotplug support. Currently, there are two solutions. One is to utilizes udev to instruct user space to reload the kdump kernel image and initrd, elfcorehdr and etc again. The other is to only update the elfcorehdr segment introduced in commit 247262756121 ("crash: add generic infrastructure for crash hotplug support"). For the 1st solution, the dm crypt keys need to be reloaded again. The user space can write true to /sys/kernel/config/crash_dm_crypt_key/reuse so the stored keys can be re-used. For the 2nd solution, the dm crypt keys don't need to be reloaded. Currently, only x86 supports the 2nd solution. If the 2nd solution gets extended to all arches, this patch can be dropped. Link: https://lkml.kernel.org/r/20250502011246.99238-5-coxu@redhat.com Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Jan Pazdziora <jpazdziora@redhat.com> Cc: Liu Pingfan <kernelfans@gmail.com> Cc: Milan Broz <gmazyland@gmail.com> Cc: Ondrej Kozina <okozina@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-21crash_dump: make dm crypt keys persist for the kdump kernelCoiby Xu
A configfs /sys/kernel/config/crash_dm_crypt_keys is provided for user space to make the dm crypt keys persist for the kdump kernel. Take the case of dumping to a LUKS-encrypted target as an example, here is the life cycle of the kdump copies of LUKS volume keys, 1. After the 1st kernel loads the initramfs during boot, systemd uses an user-input passphrase to de-crypt the LUKS volume keys or simply TPM-sealed volume keys and then save the volume keys to specified keyring (using the --link-vk-to-keyring API) and the keys will expire within specified time. 2. A user space tool (kdump initramfs loader like kdump-utils) create key items inside /sys/kernel/config/crash_dm_crypt_keys to inform the 1st kernel which keys are needed. 3. When the kdump initramfs is loaded by the kexec_file_load syscall, the 1st kernel will iterate created key items, save the keys to kdump reserved memory. 4. When the 1st kernel crashes and the kdump initramfs is booted, the kdump initramfs asks the kdump kernel to create a user key using the key stored in kdump reserved memory by writing yes to /sys/kernel/crash_dm_crypt_keys/restore. Then the LUKS encrypted device is unlocked with libcryptsetup's --volume-key-keyring API. 5. The system gets rebooted to the 1st kernel after dumping vmcore to the LUKS encrypted device is finished Eventually the keys have to stay in the kdump reserved memory for the kdump kernel to unlock encrypted volumes. During this process, some measures like letting the keys expire within specified time are desirable to reduce security risk. This patch assumes, 1) there are 128 LUKS devices at maximum to be unlocked thus MAX_KEY_NUM=128. 2) a key description won't exceed 128 bytes thus KEY_DESC_MAX_LEN=128. And here is a demo on how to interact with /sys/kernel/config/crash_dm_crypt_keys, # Add key #1 mkdir /sys/kernel/config/crash_dm_crypt_keys/7d26b7b4-e342-4d2d-b660-7426b0996720 # Add key #1's description echo cryptsetup:7d26b7b4-e342-4d2d-b660-7426b0996720 > /sys/kernel/config/crash_dm_crypt_keys/description # how many keys do we have now? cat /sys/kernel/config/crash_dm_crypt_keys/count 1 # Add key# 2 in the same way # how many keys do we have now? cat /sys/kernel/config/crash_dm_crypt_keys/count 2 # the tree structure of /crash_dm_crypt_keys configfs tree /sys/kernel/config/crash_dm_crypt_keys/ /sys/kernel/config/crash_dm_crypt_keys/ ├── 7d26b7b4-e342-4d2d-b660-7426b0996720 │   └── description ├── count ├── fce2cd38-4d59-4317-8ce2-1fd24d52c46a │   └── description Link: https://lkml.kernel.org/r/20250502011246.99238-3-coxu@redhat.com Signed-off-by: Coiby Xu <coxu@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Jan Pazdziora <jpazdziora@redhat.com> Cc: Liu Pingfan <kernelfans@gmail.com> Cc: Milan Broz <gmazyland@gmail.com> Cc: Ondrej Kozina <okozina@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-07-18 00:01:05 +0000