summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/nxp
AgeCommit message (Collapse)Author
2024-04-28ARM: dts: imx6q-bosch-acc: Use #pwm-cells = <3> for imx27-pwm deviceUwe Kleine-König
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warnings: arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-28ARM: dts: imx6q-ba16: Use #pwm-cells = <3> for imx27-pwm deviceUwe Kleine-König
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warnings: arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-28ARM: dts: imx6dl-mamoj: Use #pwm-cells = <3> for imx27-pwm deviceUwe Kleine-König
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-28ARM: dts: imx6dl-aristainetos_7: Use #pwm-cells = <3> for imx27-pwm deviceUwe Kleine-König
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-28ARM: dts: imx6dl-aristainetos_4: Use #pwm-cells = <3> for imx27-pwm deviceUwe Kleine-König
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-28ARM: dts: imx53-tqma: Use #pwm-cells = <3> for imx27-pwm devicesUwe Kleine-König
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warnings: arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dtb: pwm@53fb4000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dtb: pwm@53fb8000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dtb: pwm@53fb4000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dtb: pwm@53fb8000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx53-mba53.dtb: pwm@53fb4000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx53-mba53.dtb: pwm@53fb8000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-28ARM: dts: imx53-kp: Drop redundant settings in pwm nodesUwe Kleine-König
imx53-kp.dtsi includes imx53-tqma53.dtsi which already sets #pwm-cells to 2. So the two nodes can be dropped without resulting in any changes in the compiled device tree blobs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-28ARM: dts: imx53-ppd: Use #pwm-cells = <3> for imx27-pwm deviceUwe Kleine-König
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warnings: arch/arm/boot/dts/nxp/imx/imx53-ppd.dtb: pwm@53fb4000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx53-ppd.dtb: pwm@53fb8000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-28ARM: dts: imx53-m53evk: Use #pwm-cells = <3> for imx27-pwm deviceUwe Kleine-König
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx53-m53evk.dtb: pwm@53fb4000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-28ARM: dts: imx51-ts4800: Use #pwm-cells = <3> for imx27-pwm deviceUwe Kleine-König
The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx51-ts4800.dtb: pwm@73fb4000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-25ARM: dts: imx6ull-tarragon: Reduce SPI clock for QCA7000Stefan Wahren
Our hardware department recently informed us that, according to the specification, the QCA7000 should be operated with a maximum SPI clock frequency of 12 MHz. Even if it appears to work at a higher frequency, we should not take any risks here. A short performance test showed no measurable loss of speed. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-25ARM: dts: imx6ull-tarragon: fix USB over-current polarityMichael Heimpold
Our Tarragon platform uses a active-low signal to inform the i.MX6ULL about the over-current detection. Fixes: 5e4f393ccbf0 ("ARM: dts: imx6ull: Add chargebyte Tarragon support") Signed-off-by: Michael Heimpold <michael.heimpold@chargebyte.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-25ARM: dts: nxp: imx6qdl: fix esai clock warning when do dtb_checkFrank Li
Remove unused clock-names 'mem'. Driver (sound/soc/fsl/fsl_esai.c.) never use clock name 'mem'. arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dtb: esai@2024000: clocks: [[2, 208], [2, 209], [2, 118], [2, 208], [2, 156]] is too long from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dtb: esai@2024000: clock-names:1: 'extal' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dtb: esai@2024000: clock-names:2: 'fsys' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dtb: esai@2024000: clock-names:3: 'spba' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dtb: esai@2024000: clock-names: ['core', 'mem', 'extal', 'fsys', 'spba'] is too long from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-25ARM: dts: nxp: imx6sx: fix esai related warning when do dtb_checkFrank Li
Remove undocumented compatible string 'fsl,imx6sx-esai', which never used in driver sound/soc/fsl/fsl_esai.c. Remove unused clock-names 'mem'. Driver never use clock name 'mem'. Fix below warning: arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: esai@2024000: compatible:0: 'fsl,imx6sx-esai' is not one of ['fsl,imx35-esai', 'fsl,imx6ull-esai', 'fsl,imx8qm-esai', 'fsl,vf610-esai'] from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arm/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: esai@2024000: compatible: ['fsl,imx6sx-esai', 'fsl,imx35-esai'] is too long from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arm/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: esai@2024000: clocks: [[2, 239], [2, 240], [2, 152], [2, 239], [2, 196]] is too long from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: esai@2024000: clock-names:1: 'extal' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: esai@2024000: clock-names:2: 'fsys' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: esai@2024000: clock-names:3: 'spba' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,esai.yaml# arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: esai@2024000: clock-names: ['core', 'mem', 'extal', 'fsys', 'spba'] is too long Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-22ARM: dts: imx6: exchange fallback and specific compatible stringShengjiu Wang
Exchange fallback and specific compatible string for spdif sound card. The specific compatible string needs to be in first place, the fallback compatible string needs to be in the end. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-22ARM: dts: imx6: remove fsl,anatop property from usb controller nodeXu Yang
This property is not needed for usb controller. The usb phy needs it instead. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-22ARM: dts: imx27-phytec: Add USB supportMichael Grzeschik
This patch adds the pinmux and nodes for usbotg and usbh2. In v6 revision of the pca100 the usb phys were changed to usb3320 which are connected by their reset pins. We add the phy configuration to the description. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-03ARM: dts: imx6sx-nitrogen6sx: drop incorrect cpu-dai propertyShengjiu Wang
drop incorrect cpu-dai property, change it to ssi-controller Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-03ARM: dts: imx6qdl-udoo: Enable USB hostFabio Estevam
Commit 8f2ca252ee1f ("ARM: dts: imx6qdl-udoo: Disable USB host to work around boot issues") disabled USB host to avoid boot hang. Properly describe the USB2514 USB hub to fix this issue. Tested on a imx6q-udoo board and verified that it boots fine and USB host functionality works. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-03ARM: dts: imx7s-warp: Pass OV2680 link-frequenciesFabio Estevam
Since commit 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property verification") the ov2680 no longer probes on a imx7s-warp7: ov2680 1-0036: error -EINVAL: supported link freq 330000000 not found ov2680 1-0036: probe with driver ov2680 failed with error -22 Fix it by passing the required 'link-frequencies' property as recommended by: https://www.kernel.org/doc/html/v6.9-rc1/driver-api/media/camera-sensor.html#handling-clocks Cc: stable@vger.kernel.org Fixes: 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property verification") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02ARM: dts: imx7-mba7: Use 'no-mmc' propertyFabio Estevam
'no-emmc' is not a valid property. The original intention was to use the 'no-mmc' property. Change it accordingly to fix the following dt-schema warning: imx7s-mba7.dtb: mmc@30b40000: Unevaluated properties are not allowed ('no-emmc' was unexpected) Fixes: d430a7e0e181 ("ARM: dts: imx7-mba7: restrict usdhc interface modes") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02ARM: dts: imx7s: Add snvs-poweroff supportFabio Estevam
Just like other i.MX devices, i.MX7 also supports using the SNVS block to poweroff the chip. Add an entry for it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02ARM: dts: imx6qdl: Remove LCD.CONTRAST pinctrl from muxingAlexander Stein
GPIO4_IO20 is unused on MBA6x, unless LVDS display is attached. Remove the pinctrl for GPIO4_IO20, so it can be used otherwise. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02ARM: dts: imx6qdl: mba6: Add missing vdd-supply for on-board USB hubAlexander Stein
This adds vdd-supply powering the USB hub. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-29ARM: dts: imx6ull: add seeed studio NPi dev boardParthiban Nallathambi
Add support for Seed Stuidos NPi i.MX6ULL SoM equipped with 512MB RAM and 8GB eMMC or 512MB NAND flash. Development board comes with either eMMC or NAND based SoM with peripheral interfaces like 2 x ethernet, 2 x USB, LCD, CSI and more. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-28ARM: dts: imx: Add UNI-T UTi260B thermal camera boardSebastian Reichel
Add DT for the UNI-T UTi260B handheld thermal camera. Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-28ARM: dts: imx6: fix IRQ config of RC5T619Andreas Kemnade
Set interrupt type to level low to correctly describe the hardware and do not rely on the driver to do the right thing. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-28ARM: dts: imx6sl: tolino-shine2hd: fix IRQ config of touchscreenAndreas Kemnade
Correctly describe the interrupt as level low. Driver enforces that anyways, but do not rely on that in the devicetree. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-12Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC device tree updates from Arnd Bergmann: "There is very little going on with new SoC support this time, all the new chips are variations of others that we already support, and they are all based on ARMv8 cores: - Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are networking SoCs designed to be used in wireless routers, similar to the already supported MT7986A (Filogic 830). - NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less. These are used in many embedded and industrial applications. - Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are automotive SoCs. - TI J722S is another automotive variant of its K3 family, related to the AM62 series. There are a total of 7 new arm32 machines and 45 arm64 ones, including - Two Android phones based on the old Tegra30 chip - Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a SoM development board - A set-top box using Amlogic Meson G12A S905X2 - Eight embedded board using NXP i.MX6/8/9 - Three machines using Mediatek network router chips - Ten Chromebooks, all based on Mediatek MT8186 - One development board based on Mediatek MT8395 (Genio 1200) - Seven tablets and phones based on Qualcomm SoCs, most of them from Samsung. - A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2) - Three variants of the "White Hawk" board for Renesas automotive SoCs - Ten Rockchips RK35xx based machines, including NAS, Tablet, Game console and industrial form factors. - Three evaluation boards for TI K3 based SoCs The other changes are mainly the usual feature additions for existing hardware, cleanups, and dtc compile time fixes. One notable change is the inclusion of PowerVR SGX GPU nodes on TI SoCs" * tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits) riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig riscv: dts: starfive: jh7100: fix root clock names ARM: dts: samsung: exynos4412: decrease memory to account for unusable region arm64: dts: qcom: sm8250-xiaomi-elish: set rotation arm64: dts: qcom: sm8650: Fix SPMI channels size arm64: dts: qcom: sm8550: Fix SPMI channels size arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433 arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk dtc: Enable dtc interrupt_provider check arm64: dts: st: add video encoder support to stm32mp255 arm64: dts: st: add video decoder support to stm32mp255 ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk ARM: dts: stm32: enable CRC on stm32mp135f-dk ARM: dts: stm32: add CRC on stm32mp131 ARM: dts: add stm32f769-disco-mb1166-reva09 ARM: dts: stm32: add display support on stm32f769-disco ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco ARM: dts: stm32: add DSI support on stm32f769 ...
2024-03-04Merge tag 'imx-fixes-6.8-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.8, round 2: - Update MAINTAINERS to use a public mailing list for NXP i.MX development. - Re-enable CONFIG_BACKLIGHT_CLASS_DEVICE in imx_v6_v7_defconfig to fix a backlight regression. - Remove DSI port endpoints from i.MX7 SoC DTSI to fix a display regression. - Fix LDB clocks property for i.MX8MP device tree. - Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM. * tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mp: Fix LDB clocks property arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM MAINTAINERS: Use a proper mailinglist for NXP i.MX development ARM: dts: imx7: remove DSI port endpoints ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE Link: https://lore.kernel.org/r/ZdtPJzdenRybI+Bq@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-01Merge tag 'imx-dt64-6.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree for 6.9: - New board support: Apalis eval v1.2 carrier board, Variscite VAR-SOM-MX93, phyBOARD-Segin-i.MX93. - A series from Adam Ford to enable bluetooth, configure multiple queues on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards. - Several changesets from Alexander Stein to add i.MX8DXP support, enable audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for i.MX8MP, and improve MBA8xx board description. - A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices. - A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL support, correcting edma3 power-domains and interrupt numbers, adding I2C, FlexCAN and SMMU devices, etc. - A series from Frieder Schrempf to improve imx8mm-kontron board descriptions, disabling pulls, fixing up RTC device, adding EEPROM, and refactoring OSM-S module, etc. - A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut. - A series from Shengjiu Wang to add PDM micphone and SPDIF sound card support for imx8mm-evk board. - A series of imx8mm-venice boards improvement from Tim Harvey to add TPM device, fix USB OTG VBUS etc. - Other small and random improvements on various boards. * tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits) arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy arm64: dts: imx8mp-evk: Fix hdmi@3d node arm64: dts: imx93-var-som: Remove phy-supply from eqos arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140 arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node arm64: dts: imx8mm-evk: Add spdif sound card support arm64: dts: mba8xx: Add missing #interrupt-cells arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration arm64: dts: imx8mn: Slow default video_pll clock rate arm64: dts: imx8mp-beacon: Configure multiple queues on eqos arm64: dts: imx8mp-beacon: Enable Bluetooth arm64: dts: freescale: minor whitespace cleanup arm64: dts: lx2160a: Fix DTS for full PL011 UART ... Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-01Merge tag 'imx-dt-6.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree for 6.9: - New board support: Sielaff i.MX6 Solo, Apalis Evaluation Board v1.2. - A bunch of i.MX7 TQMA7/MBA7 updates from Alexander Stein that add various devices, improve hardware descriptions and fix dt-schema warnings, etc. - Correct touchscreen rotation for imx6sl-tolino-shine2hd board. - An imx53-qsb update from Dmitry Baryshkov to add HDMI expander support. - A couple of i.MX1 and i.MX28 device node name fixes from Fabio Estevam. - Enable usb3-lpm-capable for LS1021A usb3 node. - A couple of imx6dl-yapp4 board improvements from Michal Vokáč. - A series from Sebastian Reichel to improve imx6ull descriptions. * tag 'imx-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits) ARM: dts: nxp: imx: fix weim node name ARM: dts: nxp: imx6ul: fix touchscreen node name ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios ARM: dts: imx6ul: Remove fsl,anatop from usbotg1 ARM: dts: imx6ull: fix pinctrl node name ARM: dts: imx1-apf9328: Fix Ethernet node name ARM: dts: imx28-evk: Use 'eeprom' as the node name ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address ARM: dts: imx6ul: Set macaddress location in ocotp ARM: dts: imx53-qsb: add support for the HDMI expander ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseq ARM: dts: imx: Add support for Apalis Evaluation Board v1.2 ARM: dts: imx6: skov: add aliases for all ethernet nodes ARM: dts: imx6qdl-hummingboard: Add rtc0 and rtc1 aliases to fix hctosys ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation ARM: dts: imx6ull-dhcor: Remove 900MHz operating point ... Link: https://lore.kernel.org/r/20240226034147.233993-3-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-26ARM: dts: nxp: imx: fix weim node nameSebastian Reichel
DT node names should be generic, so replace "weim" node name with "memory-controller" in all i.MX SoC DT files. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-26ARM: dts: nxp: imx6ul: fix touchscreen node nameSebastian Reichel
The canonical node name for touchscreens is "touchscreen", so update the i.MX6UL "tsc" node accordingly. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-26ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpiosSebastian Reichel
Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen node, since the -gpio suffix is deprecated. All known implementations of this binding can handle -gpio and -gpios since day 1, so this should be fully backwards compatible. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-26ARM: dts: imx6ul: Remove fsl,anatop from usbotg1Sebastian Reichel
fsl,anatop should only be added to the usbphy nodes. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-26ARM: dts: imx6ull: fix pinctrl node nameSebastian Reichel
pinctrl node name must be either pinctrl or pinmux. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-26ARM: dts: imx1-apf9328: Fix Ethernet node nameFabio Estevam
Per davicom,dm9000.yaml, the Ethernet node name should be 'ethernet'. Change it to fix the following schema warning: imx1-apf9328.dtb: eth@4,c00000: $nodename:0: 'eth@4,c00000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/davicom,dm9000.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-26ARM: dts: imx28-evk: Use 'eeprom' as the node nameFabio Estevam
Per at24.yaml, the node name should be 'eeprom'. Change it accordingly to fix the following schema warning: imx28-evk.dtb: at24@51: $nodename:0: 'at24@51' does not match '^eeprom@[0-9a-f]{1,2}$' from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-26ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 nodeLi Yang
Enable USB3 HW LPM feature. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-25ARM: dts: imx7: remove DSI port endpointsFrancesco Dolcini
This fixes the display not working on colibri imx7, the driver fails to load with the following error: mxsfb 30730000.lcdif: error -ENODEV: Cannot connect bridge NXP i.MX7 LCDIF is connected to both the Parallel LCD Display and to a MIPI DSI IP block, currently it's not possible to describe the connection to both. Remove the port endpoint from the SOC dtsi to prevent regressions, this would need to be defined on the board DTS. Reported-by: Hiago De Franco <hiagofranco@gmail.com> Closes: https://lore.kernel.org/r/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/ Fixes: edbbae7fba49 ("ARM: dts: imx7: add MIPI-DSI support") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-25ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch nodeMichal Vokáč
We identified that the PHYs actually do not work since commit 7da7b84fee58 ("ARM: dts: imx6dl-yapp4: Move phy reset into switch node") as a coincidence of several circumstances. The reset signal is kept asserted by a pull-down resistor on the board unless it is deasserted by GPIO from the SoC. This is to keep the switch dead until it is configured properly by the kernel and user space. Prior to the referenced commit the switch was reset by the FEC driver and the reset GPIO was actively deasserted. The mdio-bus was scanned and the attached switch and its PHYs were found and configured. With the referenced commit the switch is reset by the qca8k driver. Because of another bug in the qca8k driver, functionality of the reset pin depends on its pre-kernel configuration. See commit c44fc98f0a8f ("net: dsa: qca8k: fix illegal usage of GPIO") The problem did not appear until we removed support for the switch and configuration of its reset pin from the bootloader. To fix that, properly describe the internal mdio-bus configuration of the qca8334 switch. The PHYs are internal to the switch and sit on its internal mdio-bus. Fixes: 7da7b84fee58 ("ARM: dts: imx6dl-yapp4: Move phy reset into switch node") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-25ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register addressMichal Vokáč
This change does not have any functional effect. The switch works just fine without this patch as it has full access to all the addresses on the bus. This is simply a clean-up to set the node name address and reg address to the same value. Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-24ARM: dts: imx6ul: Set macaddress location in ocotpManuel Traut
If a bootloader does not configure the MAC address, devices come up with a random MAC at the moment. ocotp provides registers for storing the mac-address. Configure those for i.MX6UL and i.MX6ULL allows net/core to retrieve it from there. Signed-off-by: Manuel Traut <manuel.traut@mt.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-23ARM: dts: imx53-qsb: add support for the HDMI expanderDmitry Baryshkov
Add support for the MCIMXHDMICARD expansion card attached to the iMX53 QSB / QSRB platforms. This enables HDMI output on those devices. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-20arm: dts: Fix dtc interrupt_provider warningsRob Herring
The dtc interrupt_provider warning is off by default. Fix all the warnings so it can be enabled. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-06ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseqChristoph Niedermaier
Remove /omit-if-no-ref/ from node usdhc1-pwrseq, because if the compile flag -@ (include symbols) is used the node will always be there. In this case, GPIO H is not released and therefore cannot be used. Therefore, remove this node manually from the corresponding devicetree file and don't rely on /omit-if-no-ref/. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-06ARM: dts: imx: Add support for Apalis Evaluation Board v1.2Hiago De Franco
Add support for the new Apalis Evaluation Board v1.2. Because only the imx6q-apalis-eval.dts was available, the imx6q-apalis-eval.dtsi has been created which has common hardware configurations for v1.0, v1.1 and v1.2. Both imx6q-apalis-eval.dts and imx6q-apalis-eval-v1.2.dts files include imx6q-apalis-eval.dtsi. Versions 1.0 and 1.1 are compatible with each other and should use imx6q-apalis-eval.dts file. Now for v1.2, the new device-tree file should be used. Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-06ARM: dts: imx6: skov: add aliases for all ethernet nodesOleksij Rempel
Add aliases for all ethernet nodes including the switch. It makes it easier to find this nodes by the boot loader. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-06arm64: dts: ls1012a: fix DWC3 USB VBUS glitch issueRan Wang
Fix DWC3 USB VBUS glitch issue. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-18 07:39:22 +0000