summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/nxp
AgeCommit message (Collapse)Author
2023-09-25ARM: dts: imx6qdl-gw591: Remove lis2de12 interrupt-namesFabio Estevam
According to st,st-sensors.yaml, the 'interrupt-names' property is not a valid one. Remove it to fix the following schema warnings: imx6dl-gw5912.dtb: accel@19: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx6qdl-gw5904: add internal mdio nodesTim Harvey
Complete the switch definition by adding the internal mdio nodes. This does not change behavior on Linux but is required if the dt is used for U-Boot which requires the internal PHY ports to be defined for DSA. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25ARM: dts: imx: add support for the ATM0700D4 panel attached to sk-imx53Dmitry Baryshkov
The SK-ATM0700D4-Plug is an extension board (provided by the same manufacturer, [1]) which can be connected to the SK-IMX53 panel kit. The panel can be connected either using the RGB parallel bus or using the LVDS connector (recommended). Add DT files describing this "shield", both RGB and LVDS connections. [1] http://starterkit.ru/html/index.php?name=shop&op=view&id=64 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-24ARM: dts: nxp: imx6qdl-nitrogen6: correct regulator node nameKrzysztof Kozlowski
Root node is not a bus, thus top-level nodes do not have unit addresses. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-24ARM: dts: imx6ul: mba6ulx: Fix gpio-keys button node namesAlexander Stein
Numbers are separated by dashes. Fixes the warnings: arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dtb: gpio-keys: 'button1', 'button2', 'button3' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-24ARM: dts: imx6ul: mba6ulx: Mark gpio-buttons as wakeup-sourceAlexander Stein
I2C expander is capable of generating an IRQ during powersave, so the attached buttons can be used for waking up the system. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-30Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM devicetree updates from Arnd Bergmann: "These are the devicetree updates for Arm and RISC-V based SoCs, mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and Starfive. Only a few new SoC got added: - TI AM62P5, a variant of the existing Sitara AM62x family - Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55 SoC. - Qualcomm ipq5018 is used in wireless access points - Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone platform. In total, 29 machines get added, which is low because of the summer break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST, Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of these are development and reference boards. Despite not adding a lot of new machines, there are over 700 patches in total, most of which are cleanups and minor fixes" * tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits) arm64: dts: use capital "OR" for multiple licenses in SPDX ARM: dts: use capital "OR" for multiple licenses in SPDX arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved ARM: dts: qcom: apq8064: add support to gsbi4 uart riscv: dts: change TH1520 files to dual license riscv: dts: thead: add BeagleV Ahead board device tree dt-bindings: riscv: Add BeagleV Ahead board compatibles ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs ARM: dts: stm32: support display on stm32f746-disco board ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco ARM: dts: stm32: add pin map for LTDC on stm32f7 ARM: dts: stm32: add ltdc support on stm32f746 MCU arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC riscv: dts: starfive: fix jh7110 qspi sort order ...
2023-08-29ARM: dts: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230823085146.113562-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12ARM: dts: imx6qdl: mba6: Fix gpio-keys button node namesAlexander Stein
Numbers are separated by dashes. Fixes the warnings: arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: gpio-buttons: 'button1', 'button2', 'button3' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12ARM: dts: imx6ul: Fix nand-controller #size-cellsAlexander Stein
nand-controller.yaml bindings says #size-cells shall be set to 0. Fixes the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dtb: nand-controller@1806000: #size-cells:0:0: 0 was expected from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12ARM: dts: imx6ul: mba6ulx: Fix stmpe811 node warningsAlexander Stein
interrupt-controller is only valid for gpio subnode, remove it. Rename touchscreen subnode according to bindings. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11ARM: dts: imx6dl-b1x5pv2: Fix simple-audio routing propertyFabio Estevam
Per simple-card.yaml, 'simple-audio-card,audio-routing' is not a valid property. Change it to 'simple-audio-card,routing'. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: imx6q-prti6q: Fix the SDIO wifi nodeFabio Estevam
Wifi chip description, which causes the following schema warning: imx6q-prti6q.dtb: mmc@2194000: Unevaluated properties are not allowed ('wifi' was unexpected) Pass the missing items to fix it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: vfxxx: Pass 'mmc' as the esdhc node namesFabio Estevam
Pass 'mmc' as the esdhc node names to fix the following schema warnings: vf610-cosmic.dtb: esdhc@400b1000: $nodename:0: 'esdhc@400b1000' does not match '^mmc(@.*)?$' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: imx53-smd: Remove invalid SPI flash entryFabio Estevam
"st,m25p" is not a valid compatible according to jedec,spi-nor.yaml. Remove it. Also, node names should be generic, so use 'flash' as the SPI NOR flash node name. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: imx50-evk: Use generic node name for SPI NOR flashFabio Estevam
Node names should be generic, so use 'flash' as the SPI NOR flash node name. This fixes the following schema warning: imx53-smd.dtb: m25p32@1: $nodename:0: 'm25p32@1' does not match '^(flash|.*sram|nand)(@.*)?$' from schema $id: http://devicetree.org/schemas/mtd/jedec,spi-nor.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: imx6q-cm-fx6: Remove invalid SPI flash entryFabio Estevam
"st,m25p" is not a valid compatible according to jedec,spi-nor.yaml. Remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: ls1021a: add TQMLS1021A flash partition layoutAlexander Stein
The bootloader does not add the partitions into DT, so add them manually here. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: ls1021a: add TQ-Systems MBLS102xA device treeAlexander Stein
Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: imx: Remove 'compatible' from the pfuze nodesFabio Estevam
Passing the 'compatible' property inside the pfuze100 regulator nodes is not allowed per pfuze100.yaml and results in the following warning: imx6q-bosch-acc.dtb: pmic@8: regulators:sw3a: Unevaluated properties are not allowed ('compatible' was unexpected) Remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: imx: Pass #sound-dai-cells to sgtl5000Fabio Estevam
As per sgtl5000.yaml, '#sound-dai-cells' is a required property. Pass it to fix the following schema warnings: imx53-mba53.dtb: sgtl5000@a: '#sound-dai-cells' is a required property Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: nxp: mxs: split interrupts per cellsKrzysztof Kozlowski
Each interrupt should be in its own cell. This is much more readable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-06ARM: dts: imx6ul-geam: Remove invalid sgtl5000 propertyFabio Estevam
As per sgtl5000.yaml, 'clock-names' is not a valid property. Remove it to fix the following schema warning: imx6ul-isiot-nand.dtb: codec@a: Unevaluated properties are not allowed ('clock-names' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx: Set default tuning step for imx6sx usdhcXiaolei Wang
If the tuning step is not set, the tuning step is set to 1. For some sd cards, the following Tuning timeout will occur. Tuning failed, falling back to fixed sampling clock So set the default tuning step. This refers to the NXP vendor's commit below: https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/ arch/arm/boot/dts/imx6sx.dtsi#L1108-L1109 Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx28: drop incorrect reg in fixed regulatorsKrzysztof Kozlowski
Fixed regulators are not in some bus and bindings do not allow a "reg" property. Move them out of "regulators" node to top-level. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx27: drop incorrect reg in fixed regulatorsKrzysztof Kozlowski
Fixed regulators are not in some bus and bindings do not allow a "reg" property. Move them out of "regulators" node to top-level. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx25: drop incorrect reg in fixed regulatorsKrzysztof Kozlowski
Fixed regulators are not in some bus and bindings do not allow a "reg" property. Move them out of "regulators" node to top-level. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx23: drop incorrect reg in fixed regulatorsKrzysztof Kozlowski
Fixed regulators are not in some bus and bindings do not allow a "reg" property. Move them out of "regulators" node to top-level. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx50-kobo-aura: switch to enable-gpiosKrzysztof Kozlowski
The recommended name for enable GPIOs property in regulator-gpio is "enable-gpios". This is also required by bindings: imx50-kobo-aura.dtb: gpio-regulator: Unevaluated properties are not allowed ('enable-gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx28-m28evk: populate fixed regulatorsKrzysztof Kozlowski
Fixed regulators put under "regulators" node will not be populated, unless simple-bus or something similar is used. Drop the "regulators" wrapper node to fix this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6ull-colibri: drop incorrect regulator regulator-typeKrzysztof Kozlowski
regulator-fixed-clock does not take "regulator-type" property: imx6ull-colibri-iris-v2.dtb: regulator-eth-phy: Unevaluated properties are not allowed ('regulator-type' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6sx-nitrogen6sx: drop incorrect regulator clock-namesKrzysztof Kozlowski
regulator-fixed does not take "clock-names" property: imx6sx-nitrogen6sx.dtb: regulator-wlan: Unevaluated properties are not allowed ('clock-names' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx53-qsb: Improve the parallel display descriptionFabio Estevam
MX53_PAD_GPIO_1__PWM2_PWMO controls the backlight of the parallel Seiko display and MX53_PAD_EIM_D24__GPIO3_24 controls the display power. Reflect that in the devicetree for better description of the board. Without these entries there is no LCD output on the Seiko display, unless the bootloader has previously configured these pins. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx: Set default tuning step for imx7d usdhcXiaolei Wang
If the tuning step is not set, the tuning step is set to 1. For some sd cards, the following Tuning timeout will occur. Tuning failed, falling back to fixed sampling clock mmc0: Tuning failed, falling back to fixed sampling clock So set the default tuning step. This refers to the NXP vendor's commit below: https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/ arch/arm/boot/dts/imx7s.dtsi#L1216-L1217 Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: nxp/imx: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio ↵Alexander Stein
properties Use id-gpios and vbus-gpios instead. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6qdl-tqma6x: Add missing vs-supply for lm75Alexander Stein
Fixes the warning: lm75 0-0048: supply vs not found, using dummy regulator Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6: phycore: Rely on PMIC reboot/reset handlerAndrej Picej
Due to the missing signal connection between i.MX6 WDOG_B pin and the PMICs external reset, the internal i.MX6 watchdog is not able to reset the phyCORE i.MX6 SoM properly. Thus disable the internal i.MX6 watchdog to prevent unexpected PMIC settings after reset. NOTE: This patch should not be backported as it might break existing uses and fixes in bootloaders. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Stefan Riedmüller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6: pfla02: Rely on PMIC reboot/reset handlerAndrej Picej
Due to the missing signal connection between i.MX6 WDOG_B pin and the PMICs external reset, the internal i.MX6 watchdog is not able to reset the phyFLEX SoM properly. Thus disable the internal i.MX6 watchdog to prevent unexpected PMIC settings after reset. NOTE: This patch should not be backported as it might break existing uses and fixes in bootloaders. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Stefan Riedmüller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6: phytec: fix RTC interrupt levelAndrej Picej
RTC interrupt level should be set to "LOW". This was revealed by the introduction of commit: f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode") which changed the way IRQ type is obtained. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Stefan Riedmüller <s.riedmueller@phytec.de> Fixes: 800d595151bb ("ARM: dts: imx6: Add initial support for phyBOARD-Mira") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6sx: Describe the default LCDIF1 parentFabio Estevam
A suitable default for the LCDIF parent is the PLL5 clock, so describe it in the device tree. The imx6sx clock driver harcodes PLL5 as the LCDIF1 parent, but in preparation for removing such hardcoding, describe the parent relationship via devicetree. There are some boards that may want to use a different parent for the LCDIF due to EMI reasons, for example. With this approch, the user can change the LCDIF parent in the board devicetree if needed. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-30ARM: dts: imx6sx: Remove LDB endpointFabio Estevam
Remove the LDB endpoint description from the common imx6sx.dtsi as it causes regression for boards that has the LCDIF connected directly to a parallel display. Let the LDB endpoint be described in the board devicetree file instead. Cc: stable@vger.kernel.org Fixes: b74edf626c4f ("ARM: dts: imx6sx: Add LDB support") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-25ARM: dts: imx6qdl-mba6: Add missing supply regulator for lm75 and at24Alexander Stein
Fixes the warnings: at24 0-0057: supply vcc not found, using dummy regulator lm75 0-0049: supply vs not found, using dummy regulator Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-25ARM: dts: imx1-apf9328: correct ethernet reg addresses (split)Krzysztof Kozlowski
The davicom,dm9000 Ethernet Controller accepts two reg addresses. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-25ARM: dts: imx7d-sdb: Pass the Ethernet aliasesFabio Estevam
Describe the Ethernet aliases so that the second MAC address can be retrieved from the bootloader. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-25ARM: dts: nxp: add missing space before {Krzysztof Kozlowski
Add missing whitespace between node name/label and opening {. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19ARM: dts: imx: Remove regulators from simple-busFabio Estevam
Regulators should not be placed under simple-bus. Move it outside simple-bus to fix the following schema warnings: regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' From schema: site-packages/dtschema/schemas/simple-bus.yaml Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-19ARM: dts: nxp/imx: limit sk-imx53 supported frequenciesDmitry Baryshkov
The SK-IMX53 board, bearing i.MX536A CPU, is not stable when running at 1.2 GHz (default iMX53 maximum). The SoC is only rated up to 800 MHz. Disable 1.2 GHz and 1 GHz frequencies. Fixes: 0b8576d8440a ("ARM: dts: imx: Add support for SK-iMX53 board") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18ARM: dts: nxp/imx6sll: fix wrong property name in usbphy nodeXu Yang
Property name "phy-3p0-supply" is used instead of "phy-reg_3p0-supply". Fixes: 9f30b6b1a957 ("ARM: dts: imx: Add basic dtsi file for imx6sll") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-07-18ARM: dts: imx25/karo-tx25: Replace NO_PAD_CTL by explicit pad configurationUwe Kleine-König
Instead of using 0x80000000 explicitly specify the reset defaults for the pad settings. This way the pad configuration is explicit and so isn't affected by changes that might have been done in the bootloader. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-06-29Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC devicetree updates from Arnd Bergmann: "The biggest change this time is for the 32-bit devicetree files, which are all moved to a new location, using separate subdirectories for each SoC vendor, following the same scheme that is used on arm64, mips and riscv. This has been discussed for many years, but so far we never did this as there was a plan to move the files out of the kernel entirely, which has never happened. The impact of this will be that all external patches no longer apply, and anything depending on the location of the dtb files in the build directory will have to change. The installed files after 'make dtbs_install' keep the current location. There are six added SoCs here that are largely variants of previously added chips. Two other chips are added in a separate branch along with their device drivers. - The Samsung Exynos 4212 makes its return after the Samsung Galaxy Express phone is addded at last. The SoC support was originally added in 2012 but removed again in 2017 as it was unused at the time. - Amlogic C3 is a Cortex-A35 based smart IP camera chip - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of the still common MSM8916 (Snapdragon 410) phone chip that has been supported for a long time. - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end laptop chips, used in the Lenovo Flex 5G, which is added along with the reference board. - Qualcomm SDX75 is the latest generation modem chip that is used as a peripherial in phones but can also run a standalone Linux. Unlike the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55. - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the Xuantie C910 core, a step up from all previously added rv64 chips. All of the above come with reference board implementations, those included there are 39 new board files, but only five more 32-bit this time, probably a new low: - Marantec Maveo board based on dhcor imx6ull module - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip - Epson Moverio BT-200 AR glasses based on TI OMAP4 - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM - ICnova ADB4006 board based on Allwinner A20 On the 64-bit side, there are also fewer addded machines than we had in the recent releases: - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device. - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234 - Qualcomm gains support for 6 reference boards on various members of their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top of the various reference platforms for their new chips. - Rockchips support for several newer boards: Indiedroid Nova (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn Fastrhino R66S/R68S (rk3568) - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex Verdin family with AM62 COM, carrier and dev boards Other changes to existing boards contain the usual minor improvements along with - continued updates to clean up dts files based on dtc warnings and binding checks, in particular cache properties and node names - support for devicetree overlays on at91, bcm283x - significant additions to existing SoC support on mediatek, qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST STM32MP1 As usual, a lot more detail is available in the individual merge commits" * tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits) ARM: mvebu: fix unit address on armada-390-db flash ARM: dts: Move .dts files to vendor sub-directories kbuild: Support flat DTBs install ARM: dts: Add .dts files missing from the build ARM: dts: allwinner: Use quoted #include ARM: dts: lan966x: kontron-d10: add PHY interrupts ARM: dts: lan966x: kontron-d10: fix SPI CS ARM: dts: lan966x: kontron-d10: fix board reset ARM: dts: at91: Enable device-tree overlay support for AT91 boards arm: dts: Enable device-tree overlay support for AT91 boards arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller ARM: dts: at91: use generic name for shutdown controller ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML riscv: dts: sort makefile entries by directory riscv: defconfig: enable T-HEAD SoC MAINTAINERS: add entry for T-HEAD RISC-V SoC riscv: dts: thead: add sipeed Lichee Pi 4A board device tree riscv: dts: add initial T-HEAD TH1520 SoC device tree riscv: Add the T-HEAD SoC family Kconfig option ...
generated by cgit (git 2.34.1) at 2025-07-18 17:48:22 +0000