summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)Author
2025-03-06Merge tag 'renesas-dts-for-v6.15-tag1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.15 - Add support for the second and third Ethernet interfaces on the Gray Hawk Single development board, - Add Image Signal Processor helper block (FCPVX and VSPX) support for the R-Car V3U and V4M SoCs, - Add Watchdog and System Controller support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II EVK development board, - Add initial support for the Yuridenki-Shokai Kakip and MYIR Remi Pi boards, - Add support for the spare UART and PMOD serial ports on the RZ/G3S SMARC Carrier II board, - Add a CPU Operating Performance Points table for the RZ/G3S SoC, - Add boot phase tags on R-Car Gen2/3/4 and RZ/G2 boards, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits) ARM: dts: renesas: r9a06g032: Fix UART dma channel order arm64: dts: renesas: rzg2: Add boot phase tags arm64: dts: renesas: rcar: Add boot phase tags ARM: dts: renesas: rcar-gen2: Add boot phase tags arm64: dts: renesas: white-hawk-csi-dsi: Use names for CSI-2 data line orders arm64: dts: renesas: ulcb/kf: Use TDM Split Mode for capture arm64: dts: renesas: Add initial support for MYIR Remi Pi arm64: dts: renesas: r9a08g045: Add OPP table arm64: dts: renesas: r9a09g057: Enable SYS node arm64: dts: renesas: r9a09g047: Add SYS node arm64: dts: renesas: r9a08g045: Enable SYS node arm64: dts: renesas: r8a779f0: Disable rswitch ports by default arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1 arm64: dts: renesas: rzg3s-smarc: Enable SCIF3 arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches arm64: dts: renesas: r8a779g0: Restore sort order arm64: dts: renesas: s4sk: Fix ethernet0 alias for rswitch arm64: dts: renesas: spider-ethernet: Add ethernetN aliases for rswitch arm64: dts: renesas: s4sk: Access rswitch ports via phandles arm64: dts: renesas: spider-ethernet: Access rswitch ports via phandles ... Link: https://lore.kernel.org/r/cover.1740156747.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-06Merge tag 'imx-fixes-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.14: - A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for usdhc3 - A change from Joe Hattori to fix OF node leak in imx-scu driver probe - A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device in cleanup path - A couple of changes from Stefan Eichenberger to fix iMX6 Apalis poweroff and iMX8M verdin-dahlia sound-card descriptions * tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card soc: imx8m: Unregister cpufreq and soc dev in cleanup path ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6 arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply firmware: imx-scu: fix OF node leak in .probe() Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-04ARM: dts: microchip: sama7g5: add ADC hw trigger edge typeNayab Sayed
Set ADC trigger edge type property as interrupt edge rising value. Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com> Link: https://lore.kernel.org/r/20250304-sama7g5-hw-trigger-enable-v1-1-61b5618285f0@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-03-03ARM: dts: qcom: ipq4018: Switch to undeprecated qcom,calibration-variantKrzysztof Kozlowski
The property qcom,ath10k-calibration-variant was deprecated in favor of recently introduced generic qcom,calibration-variant, common to all Qualcomm Atheros WiFi bindings. Change will affect out of tree users, like other projects, of this DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-1-347e9c72dcfc@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-03-03ARM: dts: microchip: sama7d65: Add watchdog for sama7d65Ryan Wanner
Add watchdog timer support for SAMA7D65 SoC. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/05785a34b9181b7debb57c1896cc733bd3088c56.1740675317.git.Ryan.Wanner@microchip.com [claudiu.beznea: fixed conflict] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-03-02ARM: dts: microchip: sama7d65: Enable shutdown controllerRyan Wanner
Enable shutdown controller to support shutdown and wake up. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/c31c40eb388b2fc0ad6ee17ed2e23bcd04e8e1c8.1740671156.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-03-02ARM: dts: microchip: sama7d65: Add SFRBU support to sama7d65Ryan Wanner
Add SFRBU support to the SAMA7D65 SoC. This is required to change the power source for backup mode for the SoC. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/dbc51f95f301c106c031fb93f84d0d847e818d91.1740671156.git.Ryan.Wanner@microchip.com [claudiu.beznea: fixed conflict] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-03-02ARM: dts: microchip: sama7d65: Add RTC support for sama7d65Ryan Wanner
Add RTC support for the SAMA7D65 SoC. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/fa1587ffef21a8198317062c15d8eb5c3ca6187c.1740671156.git.Ryan.Wanner@microchip.com [claudiu.beznea: fixed conflict, keep nodes sorted by their addresses] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-03-02ARM: dts: microchip: sama7d65: Add Shutdown controller supportRyan Wanner
Add shutdown controller support for SAMA7D65 SoC. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/ffc76b757cd1ba4ca38947f8b30525b848aa8ad7.1740671156.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-03-02ARM: dts: microchip: sama7d65: Add Reset Controller to sama7d65 SoCRyan Wanner
Add Reset Controller support to SAMA7D65 SoC. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/a9620ff11456a1ddfb9c289421606602193ce5b6.1740671156.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-28ARM: dts: microchip: fix faulty ohci/ehci node namesWolfram Sang
They should be named "usb@". Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250226084938.3436-10-wsa+renesas@sang-engineering.com [claudiu.beznea: replace at91 w/ microchip in commit title] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-28ARM: dts: microchip: usb_a9263: fix wrong vendorWolfram Sang
The board was made by Calao, not by Atmel. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250226084938.3436-9-wsa+renesas@sang-engineering.com [claudiu.beznea: replaced at91 w/ microchip in commit title] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-28ARM: dts: amlogic: meson8b: switch to the new PWM controller bindingMartin Blumenstingl
Use the new PWM controller binding which now relies on passing all clock inputs available on the SoC (instead of passing the "wanted" clock input for a given board). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241227212514.1376682-3-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2025-02-28ARM: dts: amlogic: meson8: switch to the new PWM controller bindingMartin Blumenstingl
Use the new PWM controller binding which now relies on passing all clock inputs available on the SoC (instead of passing the "wanted" clock input for a given board). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241227212514.1376682-2-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2025-02-27ARM: dts: stm32: add usr3 LED node to stm32f769-discoDario Binacchi
As indicated by the board silkscreen, there are three user LEDs. Add the missing one. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20250217114513.1098844-2-dario.binacchi@amarulasolutions.com Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-02-27ARM: dts: stm32: rename LEDs nodes for stm32f769-discoDario Binacchi
Associate the LED node name with the corresponding board silkscreen for more precise identification. In fact, the board has a total of seven LEDs, some of which are user-controllable (i. e. usr{1,2,3}), while others are directly controlled by hardware (e. g. power, overcurrent, ...). All these LEDs are either green or red, so using the names led-green and led-red for the two LEDs mapped in the DTS does not simplify their identification on the board. Moreover, this patch is a prerequisite for adding the usr3 LED, which has not been included in the DTS. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20250217114513.1098844-1-dario.binacchi@amarulasolutions.com Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-02-27ARM: dts: stm32: add push button to stm32f746 Discovery boardDario Binacchi
Add node for user push button. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20250217114332.1098482-2-dario.binacchi@amarulasolutions.com Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-02-27ARM: dts: stm32: add led to stm32f746 Discovery boardDario Binacchi
Add node for the user led. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20250217114332.1098482-1-dario.binacchi@amarulasolutions.com Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-02-26ARM: dts: stm32: Add Priva E-Measuringbox devicetreeRoan van Dijk
Introduce the devicetree for the Priva E-Measuringbox board (stm32mp133c-prihmb), based on the STM32MP133 SoC. Signed-off-by: Roan van Dijk <roan@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20250203085820.609176-5-o.rempel@pengutronix.de Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-02-26ARM: dts: stm32: Add thermal support for STM32MP131Roan van Dijk
Add thermal zone configuration and sensor node for STM32MP131 SoC. Signed-off-by: Roan van Dijk <roan@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20250203085820.609176-4-o.rempel@pengutronix.de Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-02-25ARM: dts: bcm2711: PL011 UARTs are actually r1p5Phil Elwell
The ARM PL011 UART instances in BCM2711 are r1p5 spec, which means they have 32-entry FIFOs. The correct periphid value for this is 0x00341011. Thanks to N Buchwitz for pointing this out. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250223125614.3592-2-wahrenst@gmx.net Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-02-25ARM: dts: bcm2711: Fix xHCI power-domainStefan Wahren
During s2idle tests on the Raspberry CM4 the VPU firmware always crashes on xHCI power-domain resume: root@raspberrypi:/sys/power# echo freeze > state [ 70.724347] xhci_suspend finished [ 70.727730] xhci_plat_suspend finished [ 70.755624] bcm2835-power bcm2835-power: Power grafx off [ 70.761127] USB: Set power to 0 [ 74.653040] USB: Failed to set power to 1 (-110) This seems to be caused because of the mixed usage of raspberrypi-power and bcm2835-power at the same time. So avoid the usage of the VPU firmware power-domain driver, which prevents the VPU crash. Fixes: 522c35e08b53 ("ARM: dts: bcm2711: Add BCM2711 xHCI support") Link: https://github.com/raspberrypi/linux/issues/6537 Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250201112729.31509-1-wahrenst@gmx.net Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-02-25ARM: dts: imx7d-sdb: Complete WM8960 power suppliesChancel Liu
WM8960 has the following power supplies: - AVDD - DBVDD - DCVDD - SPKVDD1 - SPKVDD2 Add new audio regulators to reflect the schematic and complete missed power supplies. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-25ARM: dts: imx6ul-14x14-evk: Complete WM8960 power suppliesChancel Liu
WM8960 has the following power supplies: - AVDD - DBVDD - DCVDD - SPKVDD1 - SPKVDD2 Add new audio regulators to reflect the schematic and complete missed power supplies. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-24ARM: dts: microchip: sama7d65: Enable DMAsRyan Wanner
Enable DMA interface for sama7d65_curiosity board. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/e233ab028123bd91b1de7b0f02eb966d719cc0af.1739555984.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-24ARM: dts: microchip: sama7d65: Add DMAs to sama7d65 SoCRyan Wanner
Add DMAs to the SAMA7D65 SoC device tree. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/78da4125a991c6f4081fce78825f1f983091e0f5.1739555984.git.Ryan.Wanner@microchip.com [claudiu.beznea: dropped extra space in reg property of dma0] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-24ARM: dts: microchip: sama7d65: Add chipID for sama7d65Ryan Wanner
Add chipID for the sama7d65 SoC to the device tree. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/14e6cafb64df345e6bd79ac96961248cc266770c.1739555984.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-23ARM: dts: imx28-sps1: Fix GPIO LEDs descriptionFabio Estevam
According to leds-gpio.yaml, the LED nodes should not contain unit addresses. Remove them. Also, 'default-trigger' is not a valid property. Change it to 'linux,default-trigger'. These changes fix the following dt-schema warnings: led@1: Unevaluated properties are not allowed ('reg' was unexpected) led@2: Unevaluated properties are not allowed ('reg' was unexpected) led@3: Unevaluated properties are not allowed ('default-trigger', 'reg' were unexpected) leds: '#address-cells', '#size-cells' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-23ARM: dts: vf610-bk4: Use the more specific "lwn,bk4-spi"Fabio Estevam
Currently, the compatible string used for the spidev device is "lwn,bk4", which is the same as the board compatible string documented at fsl.yaml. This causes several dt-schema warnings: make dtbs_check DT_SCHEMA_FILES=fsl.yaml ... ['lwn,bk4'] is too short 'lwn,bk4' is not one of ['tq,imx8dxp-tqma8xdp-mba8xx'] 'lwn,bk4' is not one of ['tq,imx8qxp-tqma8xqp-mba8xx'] 'lwn,bk4' is not one of ['armadeus,imx1-apf9328', 'fsl,imx1ads'] Use a more specific "lwn,bk4-spi" compatible string to fix the problem. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-22ARM: dts: mba6ul: change sound card model nameMarkus Niebel
The card name for ALSA is generated from the model name string and is limited to 16 characters. Use a shorter name to prevent cutting the name. Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems use the same codec with the same routing on board it is a good idea to use the same mode name for the sound card. This allows sharing a default asound.conf in BSP over all the kits. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-22ARM: dts: imx7-mba7: change sound card model nameMarkus Niebel
The card name for ALSA is generated from the model name string and is limited to 16 characters. Use a shorter name to prevent cutting the name. Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems use the same codec with the same routing on board it is a good idea to use the same mode name for the sound card. This allows sharing a default asound.conf in BSP over all the kits. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-22ARM: dts: imx6qdl-mba6: change sound card model nameMarkus Niebel
The card name for ALSA is generated from the model name string and is limited to 16 characters. Use a shorter name to prevent cutting the name. Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems use the same codec with the same routing on board it is a good idea to use the same mode name for the sound card. This allows sharing a default asound.conf in BSP over all the kits. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-21ARM: dts: qcom: Fix indentation errorsSanjay Chitroda
Corrected indentation issues in the qcom devicetree files as identified by ./scripts/checkpatch.pl. Signed-off-by: Sanjay Chitroda <quic_ckantibh@quicinc.com> Link: https://lore.kernel.org/r/40fc9c914f5972decbd6d639396d65bf080d3ceb.1738568609.git.quic_ckantibh@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-21ARM: dts: renesas: r9a06g032: Fix UART dma channel orderGeert Uytterhoeven
make dtbs_check: arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dtb: serial@50000000: dma-names:0: 'tx' was expected from schema $id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml# arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dtb: serial@50000000: dma-names:1: 'rx' was expected from schema $id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml# ... The DT bindings specify a fixed order of the channels in the dmas and dma-names properties, while the Linux driver does not care. Get rid of the warnings by changing the order in the DTS to match the bindings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/bcb604ad6e567de4e0410756ba840c82a32ff7d3.1739525488.git.geert+renesas@glider.be
2025-02-21ARM: dts: renesas: rcar-gen2: Add boot phase tagsMarek Vasut
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to describe various node usage during boot phases with DT. Add bootph-all for all nodes that are used in the bootloader on Renesas R-Car Gen2 SoCs. All SoC require CPG clock and its input clock, RST Reset, PFC pin control and PRR ID register access during all stages of the boot process, those are marked using bootph-all property, and so is the SoC bus node which contains these IP. Each board console UART is also marked as bootph-all to make it available in all stages of the boot process. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250209180616.160253-1-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-02-20ARM: dts: nxp: vf: Align GPIO hog name with bindingsKrzysztof Kozlowski
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warning: vf610-zii-dev-rev-c.dtb: eth0_intrp: $nodename:0: 'eth0_intrp' does not match '^.+-hog(-[0-9]+)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-18ARM: dts: imx5: Fix the CCM interrupts descriptionFabio Estevam
On the i.MX5 chips the peripheral interrupts are represented directly only by their interrupt numbers. The CCM nodes are not following this format and cause the following dt-schema warnings: ccm@73fd4000: interrupts: [[0], [71], [4], [0], [72], [4]] is too long Fix it by passing only the two interrupt numbers. Run-time tested in on an imx53-qsb board. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-18ARM: dts: vfxxx: Fix the CAAM job ring node namesFabio Estevam
According to fsl,sec-v4.0.yaml, the job ring node names should be 'jr'. Change them to fix the following dt-schema warnings: crypto@400f0000: 'jr0@1000', 'jr1@2000' do not match any of the regexes: '^jr@[0-9a-f]+$', '^rtic@[0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-18ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6Stefan Eichenberger
The current solution for powering off the Apalis iMX6 is not functioning as intended. To resolve this, it is necessary to power off the vgen2_reg, which will also set the POWER_ENABLE_MOCI signal to a low state. This ensures the carrier board is properly informed to initiate its power-off sequence. The new solution uses the regulator-poweroff driver, which will power off the regulator during a system shutdown. Cc: <stable@vger.kernel.org> Fixes: 4eb56e26f92e ("ARM: dts: imx6q-apalis: Command pmic to standby for poweroff") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-18ARM: dts: imx53-ppd: Fix touchscreen reset-gpiosFabio Estevam
According to atmel,maxtouch.yaml, the correct property that describes the GPIO connected to the touchscreen reset line is 'reset-gpios'. Change it accordingly to fix the following dt-schema warning: 'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-18ARM: dts: imx7s: Move csi-mux to below rootAlexander Stein
fsl,imx-iomuxc-gpr.yaml only contains the mux-controller but the actual video-mux is not part of it. So move it below root node. Fixes the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: iomuxc-gpr@30340000: 'csi-mux' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml# Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-17ARM: dts: mxs: Add descriptions for imx287 based btt3-[012] devicesLukasz Majewski
The btt3 device' HW revisions from 0 to 2 use imx287 SoC and are to some extend similar to already upstreamed XEA devices, hence are using common imx28-lwe.dtsi file. New, imx28-btt3.dtsi has been added to embrace common DTS properties for different HW revisions for this device. As a result - changes introduced in imx28-btt3-[012].dts are minimal. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-02-17ARM: dts: microchip: sama7d65_curiosity: Add power monitor supportMihai Sain
Add PAC1934 support in order to monitor the board power consumption. Device is connected on flexcom10 in twi mode. [root@SAMA7D65 ~]$ awk -f pac1934.awk VDD3V3 current: 146.173 mA, voltage: 3302.73 mV VDDIODDR current: 62.1356 mA, voltage: 1353.96 mV VDDCORE current: 242.248 mA, voltage: 1204.36 mV VDDCPU current: 213.565 mA, voltage: 1303.05 mV Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20250211143302.4102-3-mihai.sain@microchip.com [claudiu.beznea: kept pinctrl nodes alphanumerically sorted in the pinctrl container] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-17ARM: dts: microchip: sama7d65: Add flexcom 10 nodeMihai Sain
Add flexcom 10 node and its i2c-controller subnode for usage on the SAMA7D65 Curiosity board. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20250211143302.4102-2-mihai.sain@microchip.com [claudiu.beznea: use compatible, reg, ranges order in flexcom node] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-17ARM: dts: at91: usb_a9g20_lpw: use proper mmc node nameWolfram Sang
Adhere to DT schema. Found by 'make dtbs_check'. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250131210236.36212-10-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-17ARM: dts: at91: calao_usb: fix button nodesWolfram Sang
Adhere naming to DT schema. And remove the unneeded #*-cells. Found by 'make dtbs_check'. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250131210236.36212-9-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-17ARM: dts: at91: use correct vendor name for Calao boardsWolfram Sang
The company was named "Calao", not "Caloa". Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250131210236.36212-8-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-17ARM: dts: at91: calao_usb: remove heartbeat for User LEDsWolfram Sang
Default DTs should be minimal. It is cumbersome carrying a custom patch disabling the heartbeat just to use the LED for own cases. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250131162611.33338-6-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-17ARM: dts: at91: calao_usb: fix wrong polarity for LEDWolfram Sang
It is active high per testing via sysfs. Also matches the very similar usb_a9263 variant. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250131162611.33338-5-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-12ARM: dts: ixp4xx: Add Netgear WG302 v1 GPIOsLinus Walleij
This adds GPIO LED indicators, the reset GPIO RESET button on the Netgear WG302 v1 to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20250210-ixp4xx-dts-v1-3-6b752d745e04@linaro.org
generated by cgit (git 2.34.1) at 2025-07-18 02:04:10 +0000