summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)Author
2024-09-05ARM: dts: stm32: Disable PHY clock output on DH STM32MP13xx DHCOR DHSBC boardMarek Vasut
The RTL8211F PHY clock output is not used on DH STM32MP13xx DHCOR DHSBC board, disable it to improve EMI characteristics. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-05ARM: dts: stm32: Keep MDIO bus in AF across suspend DH STM32MP13xx DHCOR ↵Marek Vasut
DHSBC board The RTL8211F PHY gets confused when the MDIO bus lines get switched to ANALOG during suspend/resume cycle. Keep the MDIO and MDC lines in AF during suspend/resume to avoid confusing the PHY. The PHY can be brought out of the confused state by restarting auto-negotiation too, but that seems like an odd workaround and shouldn't be in the PHY driver. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-09-04ARM: dts: rockchip: Add pwm node for RV1126Karthikeyan Krishnasamy
Add previously omitted pwm node and possible pinctrl for Rockchip RV1126 Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Link: https://lore.kernel.org/r/20240903105245.715899-4-karthikeyan@linumiz.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04ARM: dts: rockchip: Add i2s0 node for RV1126Karthikeyan Krishnasamy
Add i2s0 node and possible pinctrl for Rockchip RV1126 Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Link: https://lore.kernel.org/r/20240903105245.715899-3-karthikeyan@linumiz.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-04ARM: dts: rockchip: Add i2c3 node for RV1126Karthikeyan Krishnasamy
Add i2c3 node and possible pinctrl for Rockchip RV1126 Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com> Link: https://lore.kernel.org/r/20240903105245.715899-2-karthikeyan@linumiz.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-09-03Merge tag 'v6.12-rockchip-dts32-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt spidev on the elgin-r1 got a real compatible, the rk3128 could enable its VPU for video decoding and the rk3128 sfc node can use the clock constant now after the merge-window. * tag 'v6.12-rockchip-dts32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Do not describe unexisting DAC device on rv1108-elgin-r1 ARM: dts: rockchip: Add vpu nodes for RK3128 ARM: dts: rockchip: use constant for HCLK_SFC on rk3128 Link: https://lore.kernel.org/r/3405397.RL5eaSpR8r@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-03Merge tag 'at91-dt-6.12' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.12 It contains: - SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet addresses (needed, at least, when U-Boot is removed from the booting chain) - 5V supplies were added to to MCP16502 PMIC nodes for better hardware description - cleanups around pinctrl nodes which removed many dtbs_check warnings; along with it the pinctrl documentation was converted to json schema - fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60 - other cleanups to fix dtbs_check warnings * tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sama7g5: Fix RTT clock ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91: align LED node name with bindings ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi ARM: dts: microchip: at91-sama7g5ek: add EEPROMs Link: https://lore.kernel.org/r/20240901133110.2038675-2-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-03Merge tag 'tegra-for-6.12-arm-dt' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree changes for v6.12-rc1 These patches add a bunch more features for the TF701T board and wire up the front panel LEDs on TrimSlice. * tag 'tegra-for-6.12-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Wire up two front panel LEDs on TrimSlice ARM: tegra: tf701t: Configure USB ARM: tegra: tf701t: Use dedicated backlight regulator ARM: tegra: tf701t: Re-group GPIO keys ARM: tegra: tf701t: Bind WIFI SDIO and EMMC ARM: tegra: tf701t: Complete sound bindings ARM: tegra: tf701t: Adjust sensors nodes ARM: tegra: tf701t: Add Bluetooth node ARM: tegra: tf701t: Add HDMI bindings ARM: tegra: tf701t: Correct and complete PMIC and PMC bindings ARM: tegra: tf701t: Bind VDE device ARM: tegra: tf701t: Use unimomentary pinmux setup Link: https://lore.kernel.org/r/20240830141004.3195210-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-03ARM: dts: imx28-lwe: Remove saif[01] definitionsLukasz Majewski
The saif[01] nodes are specific to other group of the imx287 based devices, so need to be moved to different devices description file. Leaving them here causes issues with next revision of XEA device. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx28-lwe: Reduce maximal SPI frequencyLukasz Majewski
Due to some operational problems (HW) the maximal speed of the SPI frequency for flash memory has been reduced by half. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx28-lwe: Fix partitions definitionsLukasz Majewski
The SPI-NOR memory layout has evolved during time lifetime of the device - for example special partitions to keep track of booted devices for A/B booting scheme were added. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx6qdl: align pin config nodes with bindingsKrzysztof Kozlowski
Bindings for other NXP pin controllers expect pin configuration nodes in pinctrl to match certain naming, so adjust these as well, even though their bindings are not yet in dtschema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx6sl: align pin config nodes with bindingsKrzysztof Kozlowski
Bindings for other NXP pin controllers expect pin configuration nodes in pinctrl to match certain naming, so adjust these as well, even though their bindings are not yet in dtschema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx6ul: align pin config nodes with bindingsKrzysztof Kozlowski
Bindings expect pin configuration nodes in pinctrl to match certain naming: imx6ul-kontron-bl.dtb: pinctrl@20e0000: 'usbotg1' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholderKrzysztof Kozlowski
Drop an empty pin configuration node placeholder, because bindings require 'fsl,pins' property: imx6ul-tx6ul-0010.dtb: pinctrl@20e0000: hoggrp: 'fsl,pins' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx28-tx28: Fix the fsl,saif-master usageFabio Estevam
According to fsl,saif.yaml, fsl,saif-master is a phandle to the master SAIF. Change it accordingly, to fix the following dt-schema warnings: saif@80042000: fsl,saif-master: True is not of type 'array' saif@80042000: Unevaluated properties are not allowed ('fsl,saif-master' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-By: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrlKrzysztof Kozlowski
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin configuration was not applied. Fixes dtbs_check warnings: imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+' Cc: stable@vger.kernel.org Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrlKrzysztof Kozlowski
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin configuration was not applied. Fixes dtbs_check warnings: imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+' Cc: stable@vger.kernel.org Fixes: a58e4e608bc8 ("ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-03ARM: dts: imx23/8: Rename apbh and apbx nodesFabio Estevam
According to simple-bus.yaml, apbh and apbx are not valid bus names. Rename them to apbh-bus and apbx-bus to fix the following dt-schema warnings: 'apbh@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' 'apbx@80040000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-02ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmuxMarkus Niebel
Since the muxing is described already in imx6qdl-tqma6 can be reused by this variant. No functional change. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-02ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensorMarkus Niebel
Use national,lm75a to specify exact variant used. This should cause no functional changes. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-02ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensorMarkus Niebel
Use national,lm75a to specify exact variant used. This should cause no functional changes. While at it change node name to 'temperature-sensor@48' to describe the function of the IC. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-02ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6bMarkus Niebel
Move the pinmux entries to the variant where they are actual used. No functional changes. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-01ARM: dts: imx7d-sdb: align pin config nodes with bindingsKrzysztof Kozlowski
Bindings expect pin configuration nodes in pinctrl to match certain naming and not be part of another fake node: imx7d-sdb-sht11.dtb: pinctrl@30330000: 'imx7d-sdb' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' Drop the "imx7d-sdb" wrapping node and adjust the names to have "grp" prefix. Diff looks big but this should have no functional impact. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-01ARM: dts: imx7: align pin config nodes with bindingsKrzysztof Kozlowski
Bindings expect pin configuration nodes in pinctrl to match certain naming: imx7s-colibri-eval-v3.dtb: pinctrl@30330000: 'lvdstx' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' imx7s-warp.dtb: pinctrl@30330000: 'usdhc3grp_100mhz', 'usdhc3grp_200mhz' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-01ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl propertyKrzysztof Kozlowski
There is no "fsl,phy" property in pin controller pincfg nodes: imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-01ARM: dts: imx6: update spdif sound card node propertiesElinor Montmasson
The merge of imx-spdif driver into fsl-asoc-card brought new DT properties that can be used with the "fsl,imx-audio-spdif" compatible: * The "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an S/PDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". While backward compatibility is kept to support properties "spdif-controller", "spdif-in" and "spdif-out", using new properties has several benefits: * "audio-cpu" and "audio-codec" are more generic names reflecting that the fsl-asoc-card driver supports multiple hardware. They are properties already used by devices using the fsl-asoc-card driver. They are also similar to properties of simple-card: "cpu" and "codec". * "spdif-in" and "spdif-out" imply the use of the dummy codec in the driver. However, there are already two codec drivers for the S/PDIF, spdif_transmitter and spdif_receiver. It is better to declare S/PDIF Tx and Rx devices in a DT, and then reference them with "audio-codec" than using the dummy codec. For those reasons, this commit updates in-tree DTs to use the new properties: * Rename "spdif-controller" property to "audio-cpu". * Declare S/PDIF transmitter and/or receiver devices, and use them with the "audio-codec" property instead of "spdif-out" and/or "spdif-in". These modifications were tested only on an imx8mn-evk board. Note that out-of-tree and old DTs are still supported. Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-31ARM: dts: imx28-apx4devkit: Fix the regulator descriptionFabio Estevam
The regulator should not be placed under simple-bus. Remove it from simple-bus to fix the following dt-schema warnings: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' regulators: #size-cells:0:0: 0 is not one of [1, 2] regulators: regulator@0:reg:0: [0] is too short regulators: 'ranges' is a required property Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-31ARM: dts: microchip: sama7g5: Fix RTT clockClaudiu Beznea
According to datasheet, Chapter 34. Clock Generator, section 34.2, Embedded characteristics, source clock for RTT is the TD_SLCK, registered with ID 1 by the slow clock controller driver. Fix RTT clock. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Link: https://lore.kernel.org/r/20240826165320.3068359-1-claudiu.beznea@tuxon.dev Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-29ARM: dts: rockchip: Do not describe unexisting DAC device on rv1108-elgin-r1Fabio Estevam
There is no DAC connected to the SPI bus of the Elgin RV1108 R1 board. There is a JG10309-01 LCD controlled via SPI though. Properly describe it by adding the "elgin,jg10309-01" compatible string. Reported-by: Conor Dooley <conor.dooley@microchip.com> Closes: https://lore.kernel.org/linux-arm-kernel/20240717-parrot-malt-83cc04bf6b36@spud/ Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240829113158.3324928-3-festevam@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-08-29ARM: tegra: Wire up two front panel LEDs on TrimSliceTomasz Maciej Nowak
Pins responsible for controlling these LEDs need to have tristate control removed if we want them as GPIOs. This change aligns with pinmux configuration of "dte" pin group in downstream kernel[1]. These LEDs had no function assigned on vendor kernel and there is no label on the case, the only markings are on PCB which are part of node names (ds1 marking is on power LED controlled by PMIC), so generic term is assigned as the function. 1. https://github.com/compulab/trimslice-android-kernel/blob/upstream/arch/arm/mach-tegra/board-trimslice-pinmux.c#L45 Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Configure USBSvyatoslav Ryhel
Fixes issue when resuming after suspend made USB in peripheral mode inaccessible. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Use dedicated backlight regulatorSvyatoslav Ryhel
Downstream kernel states that backlight has no actual enable GPIO and uses fixed regulator. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Re-group GPIO keysSvyatoslav Ryhel
Group GPIO keys into keys and switches. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Bind WIFI SDIO and EMMCSvyatoslav Ryhel
Add MMC nodes configuration along with WIFI binding to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Complete sound bindingsSvyatoslav Ryhel
With these changes sound works, only UCM configs are needed for complete support. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Adjust sensors nodesSvyatoslav Ryhel
Complete and adjust magnetometer, thermal sensor, motion tracker, power and light sensors according to available sources. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Add Bluetooth nodeSvyatoslav Ryhel
Add serial node along with bluetooth node to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Add HDMI bindingsSvyatoslav Ryhel
Add HDMI nodes to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Correct and complete PMIC and PMC bindingsSvyatoslav Ryhel
Add missing parts of PMIC complex, extend PMC binding and add missing fixed regulators. Additionally, refresh naming to better reflect regulator purpose. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Bind VDE deviceSvyatoslav Ryhel
Add Video Decoder Engine node to ASUS TF701T device-tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-29ARM: tegra: tf701t: Use unimomentary pinmux setupSvyatoslav Ryhel
Mimic original downstream board behavior to set up all pinmux at once. Per-device pinmux is good but we have no complete board schematics to allow such luxury. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2024-08-28Merge tag 'imx-fixes-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.11: - One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962 audio support - One pinctrl property typo fix for imx8mm-phygate - One layerscape fix from Krzysztof Kozlowski to get thermal nodes correct name length - A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA alloc-ranges and the other on SD-Card cd-gpios typo - One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match the HW design - A couple of imx95 fixes from Peng Fan, one to correct a55 power domains and the other to correct L3Cache cache-sets - One tqma9352 watchdog reset fix from Sascha Hauer - One imx93 change from Shenwei Wang to fix the default value for STMMAC EQOS snps,clk-csr * tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mm-phygate: fix typo pinctrcl-0 arm64: dts: imx95: correct L3Cache cache-sets arm64: dts: imx95: correct a55 power-domains arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design arm64: dts: imx93: update default value for snps,clk-csr arm64: dts: freescale: tqma9352: Fix watchdog reset arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962 arm64: dts: layerscape: fix thermal node names length Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-08-28Merge tag 'omap-for-v6.11/fixes-signed' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into arm/fixes OMAP fixes for v6.11-rc - omap3-n900: fix accelerometer orientation * tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: omap3-n900: correct the accelerometer orientation Link: https://lore.kernel.org/r/7h4j7eyhyh.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-08-28ARM: dts: rockchip: Add vpu nodes for RK3128Alex Bee
Add nodes for the vpu and it's attached iommu which are both part of the RK3128_PD_VIDEO powerdomain. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20240523185633.71355-4-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-08-28ARM: dts: imx7-mba7: improve compatible for LM75 temp sensorMarkus Niebel
Use national,lm75a to specify exact variant used. This should cause no functional changes. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-28ARM: dts: imx7-mba7: add iio-hwmon supportMarkus Niebel
Enable IIO hwmon support for ADC1 and ADC2. All channels are available on X23 (ADC2) and X24 (ADC1) of MBa7x. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-27ARM: dts: aspeed: catalina: Update io expander line namesPotin Lai
io_expander7 - P1-5: MCU_GPIO - P1-6: MCU_RST_N - P1-7: MCU_RECOVERY_N io_expander8 - P1-5: SEC_MCU_GPIO - P1-6: SEC_MCU_RST_N - P1-7: SEC_MCU_RECOVERY_N Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-2-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-27ARM: dts: aspeed: catalina: Add pdb cpld io expanderPotin Lai
Add more IO expanders which are emulated by the PDB CPLD. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-1-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-24ARM: dts: microchip: sam9x60: Fix rtc/rtt clocksAlexander Dahl
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator or slow rc oscillator. The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes. Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt") Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com [claudiu.beznea: removed () around the last commit description paragraph, removed " in front of "timing domain slow clock", described that TD_SLCK can also be sourced from slow rc oscillator] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
generated by cgit (git 2.34.1) at 2025-07-19 19:19:47 +0000