summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2025-02-17ARM: dts: at91: use correct vendor name for Calao boardsWolfram Sang
The company was named "Calao", not "Caloa". Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250131210236.36212-8-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-17ARM: dts: at91: calao_usb: remove heartbeat for User LEDsWolfram Sang
Default DTs should be minimal. It is cumbersome carrying a custom patch disabling the heartbeat just to use the LED for own cases. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250131162611.33338-6-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-17ARM: dts: at91: calao_usb: fix wrong polarity for LEDWolfram Sang
It is active high per testing via sysfs. Also matches the very similar usb_a9263 variant. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250131162611.33338-5-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-02-12ARM: dts: ixp4xx: Add Netgear WG302 v1 GPIOsLinus Walleij
This adds GPIO LED indicators, the reset GPIO RESET button on the Netgear WG302 v1 to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20250210-ixp4xx-dts-v1-3-6b752d745e04@linaro.org
2025-02-12ARM: dts: ixp4xx: Fix up PCI on WG302Linus Walleij
Looking at the board file for WG302 v2 was not a good idea because the GPIO IRQ for slot 2 differs, and v1 uses GPIO 10 instead of GPIO 9. Fix it up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20250210-ixp4xx-dts-v1-2-6b752d745e04@linaro.org
2025-02-12ARM: dts: Properly assign NPE to ethALinus Walleij
The way to assign NPE (network processing engines) shifted during device tree design and an erroneous entry was left behind in a disabled node. Fix it up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20250210-ixp4xx-dts-v1-1-6b752d745e04@linaro.org
2025-02-12ARM: dts: cirrus: ep7211: Align GPIO hog name with bindingsKrzysztof Kozlowski
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warning: ep7211-edb7211.dtb: lcden: $nodename:0: 'lcden' does not match '^.+-hog(-[0-9]+)?$' Link: https://lore.kernel.org/r/20250115211747.194191-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-02-09ARM: dts: sunxi: add support for NetCube Systems KumquatLukas Schmid
NetCube Systems Kumquat is a board based on the Allwinner V3s SoC, including: - 64MB DDR2 included in SoC - 10/100 Mbps Ethernet - USB-C DRD - Audio Codec - Isolated CAN-FD - ESP32 over SDIO - 8MB SPI-NOR Flash for bootloader - I2C EEPROM for MAC addresses - SDIO Connector for eMMC or SD-Card - 8x 12/24V IOs, 4x normally open relays - DS3232 RTC with Battery Backup - QWIIC connectors for external I2C devices Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> Link: https://patch.msgid.link/20250205164716.2509650-5-lukas.schmid@netcube.li Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2025-02-09ARM: dts: sunxi: add uart1_pe pinctrl for sun8i-v3sLukas Schmid
Added the uart1_pe_pins pinctrl for use by the NetCube Systems Kumquat board Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://patch.msgid.link/20250205164716.2509650-4-lukas.schmid@netcube.li Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2025-02-05ARM: dts: omap4-panda-a4: Add missing model and compatible propertiesTom Rini
When moving the model and compatible properties out of the common Pandaboard files and in to the specific boards, the omap4-panda-a4 file wasn't updated as well and so has lacked a model and compatible entry ever since. Fixes: a1a57abaaf82 ("ARM: dts: omap4-panda: Fix model and SoC family details") Signed-off-by: Tom Rini <trini@konsulko.com> Link: https://lore.kernel.org/r/20250123174901.1182176-2-trini@konsulko.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-02-05ARM: dts: ti/omap: omap4-serial: fix interrupts syntaxAndreas Kemnade
Usually interrupts are overwritten in the board file to specify a mux-dependent dedicated wakeup irq, so there is interrupts and interrupts-extended property which is not allowed. That has generated a lot of noise during dts changes if just a phandle involved has randomly changed. Avoid that mess by specifying interrupts-extended in the dtsi file. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/linux-omap/173558214240.2262575.18233884215338168789.robh@kernel.org/ Closes: https://lore.kernel.org/linux-omap/172784021601.525825.18405282128990798038.robh@kernel.org/ Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241230195556.112118-1-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-02-05ARM: dts: ti: omap: Align GPIO hog name with bindingsKrzysztof Kozlowski
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warning: omap3-evm.dtb: en_on_board_gpio_61: $nodename:0: 'en_on_board_gpio_61' does not match '^.+-hog(-[0-9]+)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250115211648.194016-1-krzysztof.kozlowski@linaro.org Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-02-04ARM: zynq: Do not define address/size-cells for nand-controllerMichal Simek
There is no reason to define address/size-cells without defining child nodes in zynq-7000.dtsi. Define it in board file instead. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/7a3b9eb256b90ea19d35f8bbe3fd311890767974.1736233292.git.michal.simek@amd.com
2025-02-03ARM: zynq: Remove ethernet0 alias from MicrozedMichal Simek
Ethernet is not using alias for ID assignment that's why alias is not needed and can be removed. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f4189063a8923ad380675f8e426e739ee3110baa.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Add sdhci to alias nodeMichal Simek
Ensure that controller will all the time use the same ID. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9fa60b57e038d51ae6677fac6628ecd663ddd2cd.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Enable QSPIs on platformsMichal Simek
Enable QSPIs with default MTD layout used for testing. Zybos, Microzed and Zturn are only enabling controller without specifying MTD map. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/b10d922fec7fde0948205b266bf7e960113859c5.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Fix fpga region DT nodes nameMichal Simek
fpga-full is not aligned with the latest dt-schema. Generic name fpga-region should be used. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0fcce9f0fa4fc2e170a7c5374d0b4063fa0bbd71.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Rename i2c?-gpio to i2c?-gpio-grpMichal Simek
Anything ending with gpio/gpios is taken as gpio phande/description which is reported as the issue coming from gpio-consumer.yaml schema. That's why rename the gpio suffix to gpio-grp to avoid name collision. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/43b2f451bfd2ebce70f3ac6442586838d3e21951.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Define rtc alias on zc702/zc706Michal Simek
Define rtc alias on zc702/zc706 boards. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9ee86a22d15fb127b8b31cf1ab6059ffb05ad55b.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Point via nvmem0 alias to eeprom on zc702/zc706Michal Simek
EEPROM stores identification information about board like a board name, revision, serial number and ethernet MAC address. U-Boot is capable to read nvmemX aliases and read/display provided information when nvmem alias link is described. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/c4a28874455a8747638551cf09ba31aa803b8b09.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Define u-boot bootscrip addr via DTMichal Simek
Define bootscript address in RAM via DT property. Adding default value to common DTSI. Platform DT description can remove this property or rewrite it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/9252bb464c5c82fda6018ea450c6f453a5d8412c.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Wire smcc with nand/nor memories on zc770 platformMichal Simek
Describe nor child flash node under smcc and enable it for xm012 extension card. And also describe nand flash memory for xm011 card. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/12e697975a1d026e811c2f63aa8bbbd0b9ff4f70.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Mark boot-phase-specific device nodesMichal Simek
Tag boot specific device nodes which are required for booting. In our case this is sync up with U-Boot project where all these IPs are already tagged and tested. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f25387e0123ee81f7d8246add3c6ec063f3cfa78.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: DT: List OCM memory for all platformsMichal Simek
Move OCM description from zc702 to all zynq boards. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/68da82d3d0733e33672562487a9df4a9374d8e1a.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Remove deprecated device_type propertyMichal Simek
Based on DT specification device_type property is deprecated and should be used only for cpu and memory nodes. That's why remove other usage. In this case ethernet phy. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/77152dc14271a2340f63e6d407f36293ed656d49.1733920873.git.michal.simek@amd.com
2025-02-03ARM: zynq: Replace 'io-standard' with 'power-source' propertySai Krishna Potthuri
Replace 'io-standard' property with 'power-source' property in all zynq dts files to be in sync with Zynq Pinctrl driver. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/cf45ed95fe0be083446d5aaf5f946f38acba7728.1733920873.git.michal.simek@amd.com
2025-02-03ARM: dts: stm32: lxa-fairytux2: add Linux Automation GmbH FairyTux 2Leonard Göhrs
The Linux Automation GmbH FairyTux2 is a small Linux device based on an Octavo Systems OSD32MP153c SiP, that occupies just two slots on a DIN rail. The device contains an eMMC for storage, a gigabit Ethernet connection, a CAN bus and a RS485 transceiver. Add support for the lxa-fairytux2 generation 1 and 2 boards based on the STM32MP153c. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2025-02-03ARM: dts: ti: davinci: Align GPIO hog name with bindingsKrzysztof Kozlowski
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warnings like: da850-lego-ev3.dtb: batt_volt_en: $nodename:0: 'batt_volt_en' does not match '^.+-hog(-[0-9]+)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: David Lechner <david@lechnology.com> Link: https://lore.kernel.org/r/20250116090030.87452-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-01-24Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC devicetree updates from Arnd Bergmann: "We see the addition of eleven new SoCs, including a total of sixx arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once again make up the majority of all changes, after a couple of quieter releases. The new SoCs in this branch are: - Microchip sama7d65 is a new 32-bit embedded chip with a single Cortex-A7 and the current high end of the old Atmel SoC line. - Samsung Exynos 9810 is a mobile phone chip used in some older phones like the Samsung Galaxy S9 - Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H (R8A779G0) low-power automotive SoC - Renesas RZ/G3E (R0A09G047) is a family of embedded chips using Cortex-A55 cores - Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on Qualcomm's Oryon CPU cores. - Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality glasses. - Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT platforms. - Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016 - Qualcomm IPQ5424 is a Wi-Fi 7 networking chip All of the above are part of already supported SoC families that only need new devicetree files. Two additional SoCs in new families are part of a separate branch. There are 48 new machines in total, including six arm32 ones based on aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and a single risc-v board, the Banana Pi R3. The remaining ones use arm64 chips from Broadcom, Samsung, NXP, Mediatek, Qualcomm, Renesas and Rockchips and cover development boards, phones, laptops, industrial machines routers. A lot of ongoing work is for cleaning up build time warnings and other issues, in addition to the new machines and added features" * tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits) arm64: tegra: Fix Tegra234 PCIe interrupt-map arm64: dts: qcom: x1e80100-romulus: Update firmware nodes arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM dt-bindings: arm: rockchip: Add Firefly ITX-3588J board arm64: dts: rockchip: Add Orange Pi 5 Max board dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi arm64: dts: rockchip: add WLAN to rk3588-evb1 controller arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes arm64: tegra: Disable Tegra234 sce-fabric node arm64: tegra: Fix typo in Tegra234 dce-fabric compatible arm64: tegra: Fix DMA ID for SPI2 arm64: dts: qcom: msm8916-samsung-serranove: Add display panel arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes arm64: dts: qcom: Remove unused and undocumented properties arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes arm64: dts: qcom: pmi8950: add LAB-IBB nodes arm64: dts: qcom: ipq5424: enable the download mode support ...
2025-01-23Merge tag 'aspeed-6.14-devicetree' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt ASPEED device tree updates for 6.14 - New machines * IBM SPB1 AST2600 BMC machine, a Sapphire Rapids x86 server * Ampre Mt Jefferson AST2600 BMC - Updates to mtmitchell, rainier, blueridge, everest, fuji, system1, harma, catalina and minerva - A big rework of yosemite4 * tag 'aspeed-6.14-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (55 commits) ARM: dts: aspeed: yosemite4: adjust secondary flash name ARM: dts: aspeed: system1: Use crps PSU driver ARM: dts: aspeed: minerva: add second source RTC ARM: dts: aspeed: minerva: add bmc ready led setting ARM: dts: aspeed: minerva: add i/o expanders on each FCB ARM: dts: aspeed: minerva: add i/o expanders on bus 0 ARM: dts: aspeed: catalina: remove interrupt of GPIOB4 form all IOEXP ARM: dts: aspeed: catalina: revise ltc4287 shunt-resistor value arm: dts: aspeed: Blueridge and Rainer: Add VRM presence GPIOs ARM: dts: aspeed: Blueridge and Fuji: Fix LED node names arm: dts: aspeed: Everest and Fuji: Add VRM presence gpio expander ARM: dts: aspeed: sbp1: IBM sbp1 BMC board dt-bindings: arm: aspeed: add IBM SBP1 board ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC dt-bindings: arm: aspeed: add Mt. Jefferson board ARM: dts: aspeed: yosemite4: Add i2c-mux for ADC monitor on Spider Board ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Fan Boards ARM: dts: aspeed: yosemite4: Change the address of Fan IC on fan boards ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards ARM: dts: aspeed: yosemite4: correct the compatible string for max31790 ... Link: https://lore.kernel.org/r/CACPK8Xe8yZLXzEQPp=1D2f0TsKA7hBZG=pHHW6U51FMpp_BiRQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'qcom-arm32-for-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm32 DeviceTree updates for v6.14 Describe the interconnect paths for PCIe EP controllers on SDX55 and SDX65. Disable USB U1/U2 entry to improve USB stability on the same. * tag 'qcom-arm32-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: sdx55: Disable USB U1/U2 entry ARM: dts: qcom: sdx65: Disable USB U1/U2 entry ARM: dts: qcom: sdx55: Add CPU PCIe EP interconnect path ARM: dts: qcom: sdx65: Add PCIe EP interconnect path Link: https://lore.kernel.org/r/20250111171126.369502-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'tegra-for-6.14-arm-dt' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt ARM: tegra: Device tree fixes for v6.14-rc1 This contains a fix that makes sure the power to the USB ports is maintained during boot. This helps with booting from USB storage. * tag 'tegra-for-6.14-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: nyan: Maintain power to USB ports on boot Link: https://lore.kernel.org/r/20250110185355.4143505-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'arm-soc/for-6.14/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree updates for 6.14, please pull the following: - Rob removes some unused and undocumented properties pertaining to the SPI flash controller on Broadcom boards - Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO, MDIO, LED controller, DMA and then proceeds with adding support for the GEnexsis XG6846B PON router - Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform * tag 'arm-soc/for-6.14/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: meraki-mr26: set mac address for gmac0 ARM: dts: broadcom: Add Genexis XG6846B DTS file dt-bindings: arm: bcmbca: Add Genexis XG6846B dt-bindings: vendor-prefixes: Add Genexis ARM: dts: bcm6846: Add ARM PL081 DMA block ARM: dts: bcm6846: Add LED controller ARM: dts: bcm6846: Add MDIO control block ARM: dts: bcm6846: Add GPIO blocks ARM: dts: bcm6846: Enable watchdog ARM: dts: bcm6846: Add iproc rng arm: dts: broadcom: Remove unused and undocumented properties Link: https://lore.kernel.org/r/20250109224756.3632025-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'at91-dt-6.14-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.14 #2 This update includes: - device tree files for the SAMA7D65 SoC and its evaluation board * tag 'at91-dt-6.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: add support for sama7d65_curiosity board ARM: dts: microchip: add sama7d65 SoC DT Link: https://lore.kernel.org/r/20250109164317.1154613-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'sunxi-dt-for-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner Device Tree changes for 6.14 - Add support for DMA engine and audio codec on F1C100s and enable audio codec on Lichee Pi Nano - Add syscon and SRAM nodes for A100 - Enable CPU DVFS for Tanix TX1 - Explicitly configure TCON0 pixel clock parent according to display output used This includes one commit shared with the clock tree dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI which adds the macros for the TCON0 pixel clock parents. * tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0 dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI arm64: dts: allwinner: h313: enable DVFS for Tanix TX1 arm64: dts: allwinner: a100: Add syscon nodes dt-bindings: sram: sunxi-sram: Add A100 compatible ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano ARM: dts: suniv: f1c100s: Add support for Audio Codec ARM: dts: suniv: f1c100s: Add support for DMA Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'mtk-dts32-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt mt7623: fix validation error of ir-receiver * tag 'mtk-dts32-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: ARM: dts: mediatek: mt7623: fix IR nodename Link: https://lore.kernel.org/r/ea93d0ea-a1a0-4d36-8880-4f05c85f0c1b@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'omap-for-v6.14/dt-signed' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt ARM: dts: ti/omap/dra7: minor updates for v6.14 * tag 'omap-for-v6.14/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: ti/omap: omap3-gta04: use proper touchscreen properties ARM: dts: ti: am437x-l4: remove autoidle for UART ARM: dts: ti/omap: gta04: fix pm issues caused by spi module ARM: dts: dra7: Add bus_dma_limit for l4 cfg bus Link: https://lore.kernel.org/r/7hmsg2b42q.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'at91-dt-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.14 This update includes: - power monitor support for the SAM9X75 Curiosity board (using the PAC1934 device) - fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1 EK and SAMA5D29 Curiosity boards) - partial support for the SAMA7D65 SoC - cleanups * tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodes ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodes ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node ARM: dts: at91: Add sama7d65 pinmux dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity ARM: dts: microchip: sam9x75_curiosity: Add power monitor support ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi Link: https://lore.kernel.org/r/20250107081424.758980-2-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'amlogic-arm-dt-for-v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM DT changes for v6.14: - remove size and address cells from USB nodes * tag 'amlogic-arm-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: amlogic: meson: remove size and address cells from USB nodes Link: https://lore.kernel.org/r/77c645b3-0cdf-49f4-84e9-11c74074b9a8@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'sti-dt-for-v6.14-round1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt Add and enable MALI400 support for STiH410-b2260 * tag 'sti-dt-for-v6.14-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: st: enable the MALI gpu on the stih410-b2260 ARM: dts: st: add node for the MALI gpu on stih410.dtsi dt-bindings: gpu: mali-utgard: Add st,stih410-mali compatible Link: https://lore.kernel.org/r/f44cb1f0-4d91-4e25-8b1f-3dd9a7bed62b@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'imx-dt-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree change for 6.14: - Clean up TQMa7x device trees (Alexander Stein) - Correct node name pattern for mdio-gpio devices (Fabio Estevam) - Update deprecated GPIO properties for Generic ASoC Sound Card device (Geert Uytterhoeven) - Set USB dr_mode property to OTG explicitly for imx6qdl-sabresd based boards (Hui Wang) - Update MAINTAINERS entry for DH electronics DHSOM boards (Marek Vasut) - A series from Stefan Kerkmann to add phy-3p0-supply for usb phys * tag 'imx-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx: Use the correct mdio pattern ARM: dts: imx6qdl-sabresd: add dr_mode to usbotg ARM: dts: imx6qdl-apalis: Change to "adi,force-bt656-4" ARM: dts: imx6sx: add phy-3p0-supply to usb phys ARM: dts: imx6sl: add phy-3p0-supply to usb phys ARM: dts: imx6qdl: add phy-3p0-supply to usb phys MAINTAINERS: Update entry for DH electronics DHSOM SoMs and boards ARM: dts: imx7[d]-mba7: add Ethernet PHY IRQ support ARM: dts: imx7-mba7: Remove duplicated power supply ARM: dts: imx7-mba7: Fix SD card vmmc-supply ARM: dts: imx7-mba7: Add 3.3V and 5.0V regulators ARM: dts: imx7-tqma7: add missing vs-supply for LM75A (rev. 01xxx) ARM: dts: imx7-tqma7: Remove superfluous status="okay" property ARM: dts: imx7-mba7: remove LVDS transmitter regulator ARM: dts: imx: Switch to {hp,mic}-det-gpios Link: https://lore.kernel.org/r/20250105095139.714590-3-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'socfpga_dts_updates_v6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt SoCFPGA DTS updates for v6.14 - Remove unused and undocumented property "snps,max-mtu" - Add gpio and spi node for Agilex5 - Add VGIC maintenance interrupt for Agilex - Use correct reset name of "stmmaceth-ocp" instead of "ahb" - Drop unused #address-cells/#size-cells in the cyclone5-mcvevk * tag 'socfpga_dts_updates_v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: altera: Remove unused and undocumented "snps,max-mtu" property arm64: dts: socfpga: agilex5: Add gpio0 node and spi dma handshake id arm64: dts: socfpga: agilex: Add VGIC maintenance interrupt arm: dts: socfpga: use reset-name "stmmaceth-ocp" instead of "ahb" ARM: dts: socfpga_cyclone5_mcvevk: Drop unused #address-cells/#size-cells Link: https://lore.kernel.org/r/20250103023012.1268627-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-16Merge tag 'dt-cleanup-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.14 1. Marvell: Use un-deprecated hp-det-gpios (no ABI impact expected). 2. SoCFPGA: Drop spidev devices which are not properly described in DTS, but are using some other compatibles. This was part of wider tree effort to fix such incorrect hardware descriptions. Important: Dropping this device node will have user-visible impact: spidev device will not register. * tag 'dt-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: socfpga: remove non-existent DAC from CycloneV devkit ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios Link: https://lore.kernel.org/r/20241231132847.135814-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15Merge tag 'samsung-dt-6.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM changes for v6.14 Few fixes and improvements for sound on Galaxy Tab3 (Exynos4212). * tag 'samsung-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection Link: https://lore.kernel.org/r/20241231131742.134329-3-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-08ARM: dts: mediatek: mt7623: fix IR nodenameRafał Miłecki
Fix following validation error: arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dtb: cir@10013000: $nodename:0: 'cir@10013000' does not match '^ir(-receiver)?(@[a-f0-9]+)?$' from schema $id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml# Fixes: 91044f38dae7 ("arm: dts: mt7623: add ir nodes to the mt7623.dtsi file") Cc: linux-media@vger.kernel.org Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20240617094634.23173-1-zajec5@gmail.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2025-01-08ARM: dts: aspeed: yosemite4: adjust secondary flash namePatrick Williams
Meta (Facebook) has a preference for all of our secondary flash chips to be labelled "alt-bmc" for consistency of userspace tools deal with updates. Bletchley, Harma, Minerva, and Catalina all follow this convention but for some reason Yosemite4 is different. Adjust the label in the dts to match the other platforms. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Link: https://patch.msgid.link/20250107162726.232402-1-patrick@stwcx.xyz Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-01-07ARM: dts: ti/omap: omap3-gta04: use proper touchscreen propertiesAndreas Kemnade
Specify the dimensions of the touchscreen propertly so that no userspace configuration is needed for it. Tested with x11 and weston on Debian bookworm. What is in now is some debris from earlier tries to handle scaling in kernel: https://lore.kernel.org/linux-input/cover.1482936802.git.hns@goldelico.com/ Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20241205204413.2466775-3-akemnade@kernel.org Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-01-07ARM: dts: ti: am437x-l4: remove autoidle for UARTJudith Mendez
According to the TRM [0] in 21.5.1.42 UART_SYSC Register, the autoidle bit should not be set for UART, so remove the appropriate SYSC_OMAP2_AUTOIDLE flag. [0] https://www.ti.com/lit/ug/spruhl7i/spruhl7i.pdf Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Sukrut Bellary <sbellary@baylibre.com> Link: https://lore.kernel.org/r/20241220223523.2125278-1-jm@ti.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-01-07ARM: dts: ti/omap: gta04: fix pm issues caused by spi moduleAndreas Kemnade
Despite CM_IDLEST1_CORE and CM_FCLKEN1_CORE behaving normal, disabling SPI leads to messages like when suspending: Powerdomain (core_pwrdm) didn't enter target state 0 and according to /sys/kernel/debug/pm_debug/count off state is not entered. That was not connected to SPI during the discussion of disabling SPI. See: https://lore.kernel.org/linux-omap/20230122100852.32ae082c@aktux/ The reason is that SPI is per default in slave mode. Linux driver will turn it to master per default. It slave mode, the powerdomain seems to be kept active if active chip select input is sensed. Fix that by explicitly disabling the SPI3 pins which used to be muxed by the bootloader since they are available on an optionally fitted header which would require dtb overlays anyways. Fixes: a622310f7f01 ("ARM: dts: gta04: fix excess dma channel usage") CC: stable@vger.kernel.org Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241204174152.2360431-1-andreas@kemnade.info Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2025-01-07ARM: dts: microchip: add support for sama7d65_curiosity boardRomain Sioen
Add device tree support for the SAMA7D65 Curiosity board. Update the Makefile to include the new device tree file. uart6 is related to flexcom6, hence not sorted in alphabetical order. Signed-off-by: Romain Sioen <romain.sioen@microchip.com> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/20250107160850.120537-6-Ryan.Wanner@microchip.com [claudiu.beznea: moved chosen node after alias for aphanumerically sortage, added a space in front of <PIN_PD19__FLEXCOM6_IO1> for alignment] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
generated by cgit (git 2.34.1) at 2025-07-18 10:11:54 +0000