summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91
AgeCommit message (Collapse)Author
2015-01-26ARM: at91: remove unused mach/system_rev.hAlexandre Belloni
mach/system_rev.h is not used, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: stop using HAVE_AT91_DBGUxAlexandre Belloni
In order to remove SOC_SAM9xxx options, stop using HAVE_AT91_DBGUx. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: fix ordering of SRAM and PM initializationNicolas Ferre
The PM initialization needs internal SRAM for allocating a gen_pool and use it to store its PM code. So we need to have of_platform_populate() before this code. Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: sam9: set arm_pm_idle from sam9_dt_device_initAlexandre Belloni
As all sam9 SoCs are setting arm_pm_idle to at91sam9_idle(), do it from sam9_dt_device_init(). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: adapt patch to newer series] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: fix sam9n12 and sam9x5 arm_pm_idleAlexandre Belloni
sam9n12 and sam9x5 don't set arm_pm_idle because of an oversight, fix that. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: mark const init data with __initconst instead of __initdataAlexandre Belloni
As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: update the paths after having re-arranged the patches] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: fix PM initialization for newer SoCsNicolas Ferre
Newer SoCs: at91sam9x5, at91sam9n12, sama5d3 and sama5d4 embed a DDR controller and have a different PMC status register layout than the at91sam9g45. Create another at91_sam9x5_pm_init() function to match this compatibility. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: move at91rm9200_idle() to clk/at91/pmc.cAlexandre Belloni
Move at91rm9200_idle() along with at91sam9_idle() in clk/at91/pmc.c. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: remove unused at91_init_sramAlexandre Belloni
SRAM initialization is now done through the mmio-sram driver and at91_init_sram() is not called anymore, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: sama5d4: remove useless call to at91_init_sramAlexandre Belloni
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: remove useless map_ioAlexandre Belloni
Now that the SRAM is initialized by the mmio-sram driver, .map_io is useless. remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: pm: prepare for multiplatformAlexandre Belloni
Split at91_pm_init() in three variants that are called by the respective SoCs .init_machine. This allows to remove the of_machine_is_compatible() calls and move at91_pm_init() out of arch_initcall() which is required for multiplatform. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: pm: add UDP and UHP checks to newer SoCsAlexandre Belloni
Check UDP and UHP on sam9x5, sam9n12 and the sama5 series. Check UHP on the sam9g45. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: pm: use the mmio-sram pool to access SRAMAlexandre Belloni
Now that the SRAM is part of a genpool, use it to allocate memory to use for the slowclock implementation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: pm: rework cpu detectionAlexandre Belloni
Store SoC differences in a struct to remove cpu_is_* usage. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless at91rm9200_set_type()Alexandre Belloni
Since all rm9200 board files have been removed, there is no user of at91rm9200_set_type() left. Remove it Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless at91rm9200_dt_initialize()Alexandre Belloni
at91rm9200_dt_initialize() is doing the same as at91_dt_initialize(), use that one instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: move debug-macro.S into the common spaceAlexandre Belloni
Move debug-macro.S from include/mach/ to include/debug where all other common debug macros are. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless at91_sysirq_mask_rtxAlexandre Belloni
The irq fixup from at91_sysirq_mask_rtc and at91_sysirq_mask_rtt is now handled by aic_common_rtc_irq_fixup and aic_common_rtt_irq_fixup. Remove those useless functions. Also remove the now unused mach/at91_rtt.h header. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless config MACH_AT91SAM9_DTAlexandre Belloni
Now that at91sam9 SoCs are only supported through DT, remove CONFIG_MACH_AT91SAM9_DT and use CONFIG_SOC_AT91SAM9 instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless config MACH_AT91RM9200_DTAlexandre Belloni
Now that rm9200 is only supported through DT, remove CONFIG_MACH_AT91RM9200_DT and use CONFIG_SOC_AT91RM9200 instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove unused mach/memory.hAlexandre Belloni
CONFIG_NEED_MACH_MEMORY_H is not set by any at91 platform, remove mach/memory.h Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless header file includesBoris Brezillon
Since removal of !DT boards, asm/irq.h inclusion is not needed in these product files. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove unneeded header fileNicolas Ferre
These GPIO pin descriptions are now moved with the pinctrl driver. We can safely remove this useless header file. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-12ARM: at91: board-dt-sama5: add phy_fixup to override NAND_TreeWenyou Yang
Appearance: On some SAMA5D4EK boards, after power up, the Eth1 doesn't work. Reason: The PIOE2 pin is connected to the NAND_Tree# of KSZ8081, But it outputs LOW during the reset period, which cause the NAND_Tree# enabled. Add phy_fixup() to disable NAND_Tree by overriding the Operation Mode Strap Override register(i.e. Register 16h) to clear the NAND_Tree bit. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-09Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "The remaining cleanups for 3.19 are to a large part result of devicetree conversion nearing completion on two other platforms besides AT91: - Like AT91, Renesas shmobile is in the process to migrate to DT and multiplatform, but using a different approach of doing it one SoC at a time. For 3.19, the r8a7791 platform and associated "Koelsch" board are considered complete and we remove the non-DT non-multiplatform support for this. - The ARM Versatile Express has supported DT and multiplatform for a long time, but we have still kept the legacy board files around, because not all drivers were fully working before. We have finally taken the last step to remove the board files. Other changes in this branch are preparation for the later branches or just unrelated to the more interesting changes: - The dts files for arm64 get moved into per-vendor directories for a clearer structure. - Some dead code removal (zynq, exynos, davinci, imx) - Using pr_*() macros more consistently instead of printk(KERN_*) in some platform code" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (71 commits) ARM: zynq: Remove secondary_startup() declaration from header ARM: vexpress: Enable regulator framework when MMCI is in use ARM: vexpress: Remove non-DT code ARM: imx: Remove unneeded .map_io initialization ARM: dts: imx6qdl-sabresd: Fix the microphone route ARM: imx: refactor mxc_iomux_mode() ARM: imx: simplify clk_pllv3_prepare() ARM: imx6q: drop unnecessary semicolon ARM: imx: clean up machine mxc_arch_reset_init_dt reset init ARM: dts: imx6qdl-rex: Remove unneeded 'fsl,mode' property ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl,mode' property ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO define ARM: at91: remove useless init_time for DT-only SoCs ARM: davinci: Remove redundant casts ARM: davinci: Use standard logging styles ARM: shmobile: r8a7779: Spelling/grammar s/entity/identity/, s/map/mapping/ ARM: shmobile: sh7372: Spelling/grammar s/entity map/identity mapping/ ARM: shmobile: sh73a0: Spelling/grammar s/entity map/identity mapping/ ARM: EXYNOS: Remove unused static iomapping ARM: at91: fix build breakage due to legacy board removals ...
2014-12-09Merge tag 'at91-cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup on mach-at91 from Arnd Bergmann: "On Atmel AT91, the conversion to device tree is now considered complete, and all machines that were not already converted in 3.18 are assumed to be unused and dropped by the maintainer. All remaining board files that were written in C are dropped, and the ancient at91x40 sub-platform (based on an MMU-less ARM7) is removed altogether. Cleaning up the last pieces was great fun, so I took the time to do some of the coding myself and removed several hundred code lines that ended up unused after the board files were done. There are still a couple of AT91 specific device drivers that are not converted to DT (CF, USB-OTG) and currently not working, and the platform itself is not "multiplatform"-enabled, but both issues are going to be taken care of in the 3.20 cycle. This is split out from the other cleanups purely based on the size of the branch" * tag 'at91-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits) ARM: at91: remove unused board.h file ARM: at91: remove unneeded header files ARM: at91/clocksource: remove !DT PIT initializations ARM: at91: at91rm9200 ST initialization is now DT only ARM: at91: remove old AT91-specific drivers ARM: at91: cleanup initilisation code by removing dead code ARM: at91/Kconfig: select board files automatically ARM: at91: remove unused IRQ function declarations ARM: at91: remove legacy IRQ driver and related code ARM: at91: remove old at91-specific clock driver ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c files ARM: at91: remove all !DT related configuration options ARM: at91/trivial: update Kconfig comment to mention SAMA5 ARM: at91: always USE_OF from now on ARM: at91/Kconfig: remove ARCH_AT91RM9200 option for drivers ARM: at91: switch configuration option to SOC_AT91RM9200 ARM: at91: remove at91rm9200 legacy board support ARM: at91: remove at91rm9200 legacy boards files ARM: at91/Kconfig: remove useless fbdev Kconfig options ARM: at91: remove at91sam9261/at91sam9g10 legacy board support ...
2014-12-04Merge tag 'at91-cleanup5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup Pull "Fifth batch of cleanup/SoC for 3.19" from Nicolas Ferre: - removal of now dead code and AT91-specific driver - removal of !DT initialization in some core AT91 drivers - simplification of Kconfig DT board file selection: now automatic * tag 'at91-cleanup5' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: remove unused board.h file ARM: at91: remove unneeded header files ARM: at91/clocksource: remove !DT PIT initializations ARM: at91: at91rm9200 ST initialization is now DT only ARM: at91: remove old AT91-specific drivers ARM: at91: cleanup initilisation code by removing dead code ARM: at91/Kconfig: select board files automatically Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-03ARM: at91: remove unused board.h fileArnd Bergmann
All functions declared in this file are gone. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: re-order patches so modify board-dt-sam9] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-03ARM: at91: remove unneeded header filesNicolas Ferre
These files were left behind with no reason. Remove them. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-03ARM: at91/clocksource: remove !DT PIT initializationsArnd Bergmann
As AT91 !DT code is now removed, cleanup the PIT clocksource driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-12-02ARM: at91: at91rm9200 ST initialization is now DT onlyArnd Bergmann
As at91rm9200 is now DT only, there is no need to keep old entry point in this at91rm9200 System Timer (ST) driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-02ARM: at91: remove old AT91-specific driversArnd Bergmann
GPIO and LED drivers were replaced by generic ones for DT boards. These drivers were remaining: delete them now. Modifications are also done on the corresponding header files. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-02ARM: at91: cleanup initilisation code by removing dead codeArnd Bergmann
The AT91-specific SoC strucutre "struct at91_init_soc" was filled with specific !DT initilisation functions. Now that we got rid of the !DT board file description, remove unneeded functions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-02ARM: at91/Kconfig: select board files automaticallyArnd Bergmann
An explicit selection option is not needed for board files so now we select the board from SoC option. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: remove option's comments; split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-28Merge tag 'at91-cleanup4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup Pull "Fourth batch of cleanup/SoC for 3.19" from Nicolas Ferre: - removal of legacy board support for the last SoC having board C files: at91rm9200 - removal or modification of some Kconfig options - switch to USE_OF for all the AT91 SoCs - removal of the old AT91-specific clocks and IRQ drivers * tag 'at91-cleanup4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: remove unused IRQ function declarations ARM: at91: remove legacy IRQ driver and related code ARM: at91: remove old at91-specific clock driver ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c files ARM: at91: remove all !DT related configuration options ARM: at91/trivial: update Kconfig comment to mention SAMA5 ARM: at91: always USE_OF from now on ARM: at91/Kconfig: remove ARCH_AT91RM9200 option for drivers ARM: at91: switch configuration option to SOC_AT91RM9200 ARM: at91: remove at91rm9200 legacy board support ARM: at91: remove at91rm9200 legacy boards files Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28Merge tag 'at91-cleanup3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup Pull "Third batch of cleanup/SoC for 3.19" from Nicolas Ferre: - fixes following legacy board removal - removal of legacy board support for at91sam9263, at91sam9260/at91sam9g20 and at91sam9261/at91sam9g10 SoCs families. Please use DT now. - removal of some now useless Kconfig options * tag 'at91-cleanup3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/Kconfig: remove useless fbdev Kconfig options ARM: at91: remove at91sam9261/at91sam9g10 legacy board support ARM: at91/Kconfig: remove unused config options ARM: at91: remove at91sam9260/at91sam9g20 legacy board support ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files ARM: at91: remove at91sam9263 legacy board support ARM: at91/at91sam9g45: remove useless header file Conflicts: arch/arm/mach-at91/at91sam9g45.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27ARM: at91: remove unused IRQ function declarationsNicolas Ferre
Since 3b26f39b0ab1 (ARM: at91: make use of the new AIC driver for dt enabled boards) the old IRQ initialisation functions aren't used anymore: remove their declaration in generic.h. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-27ARM: at91: remove legacy IRQ driver and related codeNicolas Ferre
Remove irc.c and associated header file. The related code was idendified by the CONFIG_OLD_IRQ_AT91 option that was removed previously. It has been spotted by following coccinelle semantic match: @rule1@ expression E; statement S; @@ ( - if (IS_ENABLED(CONFIG_OLD_IRQ_AT91)) S | - if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && E) S ) Cc: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-26ARM: at91: remove old at91-specific clock driverNicolas Ferre
This clock driver collection was specific to AT91 and only used in !DT cases. All clocks and the clock trees for all Atmel SoCs are now described by drivers using the common clock framework. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-26ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c filesNicolas Ferre
As the CONFIG_OLD_CLK_AT91 option is gone, let's completely remove the AT91 old clock driver related data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-26ARM: at91: remove all !DT related configuration optionsNicolas Ferre
OLD_CLK_AT91 & OLD_IRQ_AT91 were only selected by entries in Kconfig.non_dt that are now gone. So we remove all this legacy stuff and select the proper options in the SOC_ entries. As USE_OF is now selected directly in arch/arm/Kconfig AT91 entry, we can safely remove it everywhere in this file. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-21ARM: at91: switch configuration option to SOC_AT91RM9200Nicolas Ferre
As the ARCH_AT91RM9200 is removed because being !DT, we use the SOC_AT91RM9200 variant. This option can certainly be removed once the ST driver is reworked a bit. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-21ARM: at91: remove at91rm9200 legacy board supportNicolas Ferre
Second part of at91rm9200 legacy !DT removal. This is the core !DT support removal for this Atmel SoC. Note that from now on, the Kconfig.non_dt file and its specialized options are completely removed. Use the Device Tree for running this board with newer kernels. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-21ARM: at91: remove at91rm9200 legacy boards filesNicolas Ferre
Remove old board files that use at91rm9200 Atmel SoC. The device tree is mature on this SoCs. It must be used now. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-21ARM: at91: remove at91sam9261/at91sam9g10 legacy board supportNicolas Ferre
Remove legacy support for at91sam9261/at91sam9g10 boards. This include board files removal plus all legacy code for non DT boards support. Use the Device Tree for running this board with newer kernels. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-20Merge tag 'at91-cleanup2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup Pull "Second batch of cleanup/SoC for 3.19" from Nicolas Ferre: - fixes following legacy board removal - removal of an unused config option CONFIG_MACH_SAMA5_DT - move of some header files out of include/mach directory * tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: move sdramc/ddrsdr header to include/soc/at91 ARM: at91: remove CONFIG_MACH_SAMA5_DT ARM: at91: remove unused CONFIG_ARCH_AT91SAM9G45 option ARM: at91: remove useless init_time for DT-only SoCs ARM: at91: fix build breakage due to legacy board removals Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19ARM: at91: remove useless init_time for DT-only SoCsBoris Brezillon
Commits bcf8c7e7703bb2bbde66bec26a81fed4be9cd1d4 and 4bf7753b8ab7c704ca864b1653367ea9cfe68a25 introduced compilation errors ("error: 'NR_IRQS_LEGACY' undeclared (first use in this function)") because they remove the asm/irq.h inclusion while the init_time function needs it for the NR_IRQS_LEGACY definition. In the other hand, the point of these commits is to remove board file support, and init_time is only needed when booting non-DT boards, we can thus safely remove init_time functions. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19ARM: at91: remove at91sam9260/at91sam9g20 legacy board supportNicolas Ferre
Second part of at91sam9260/at91sam9g20 legacy !DT removal. This is the core !DT support removal for these two Atmel SoCs. Use the Device Tree for running this board with newer kernels. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91: remove at91sam9260/at91sam9g20 legacy boards filesNicolas Ferre
Remove old board files that use at91sam9260 or at91sam9g20 Atmel SoCs. The device tree is mature on these SoCs. It must be used now. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit (git 2.34.1) at 2025-07-18 17:23:50 +0000