| Age | Commit message (Collapse) | Author |
|---|
|
Add syscon node for the PMU Interrupt Generation registers.
Additionally update the exynos-pmu node to provide a phandle
to pmu-intr-gen syscon.
These registers are required for CPU hotplug to be functional.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250506-contrib-pg-cpu-hotplug-suspend2ram-fixes-v1-v4-4-9f64a2657316@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The FVP Rev C model includes CoreSight ETE and TRBE support. These
features can be enabled by specifying parameters when launching the
model:
| -C cluster0.has_ete: 1
| -C cluster1.has_ete: 1
| -C cluster0.has_trbe: 1
| -C cluster1.has_trbe: 1
This change adds device tree nodes for the ETE and TRBE. They are
disabled by default to prevent kernel warnings from failed driver
probes, as the model does not enable the features unless explicitly
specified as mentioned above.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Message-Id: <20250512151149.13111-1-leo.yan@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Drop the clock-frequency property from the timer nodes, since it must be
configured by the boot/secure firmware.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Message-Id: <20250512101132.1743920-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Reserve 64MB of memory at the end of the first bank of DRAM on FVP model.
This is mainly for FF-A firmware use, as required by various firmware
configurations using the Firmware Framework for Arm (FF-A). This prevents
the kernel from overwriting the firmware region.
This is also useful when running other firmware configurations(non FF-A
based) that rely on usage of 64MB at the end of first DRAM bank.
Necessary for proper coexistence of firmware(FF-A partitions) and the OS.
Message-Id: <20250509154640.836093-3-sudeep.holla@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add CPU idle state definitions to the FVP Rev C device tree to enable
support for CPU lower power modes. This allows the system to properly
enter low power states during idle. It is disabled by default as it is
know to impact performance on the models.
Note that the power_state parameter(arm,psci-suspend-param) doesn't use
the Extended StateID format for compatibility reasons on FVP.
Tested on the FVP Rev C model with PSCI support enabled firmware.
Tested-by: Leo Yan <leo.yan@arm.com>
Message-Id: <20250509154640.836093-2-sudeep.holla@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Introduce a system-level timer node in the FVP device tree to act as
a broadcast timer when CPUs are in context losing idle states where
the local timer stops on entering such low power states.
This change complements recent CPU idle state additions.
Tested-by: Leo Yan <leo.yan@arm.com>
Message-Id: <20250509154640.836093-1-sudeep.holla@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree change for 6.16:
- New board support: TQMa8XxS, TQMa95xxSA, TQMa93xx, MBa91xxCA,
i.MX943 EVK, Nitrogen8M Plus ENC Carrier, Toradex SMARC i.MX8MP,
Libra-i.MX 8M Plus FPSC board
- A couple of imx8mp-tqma8mpql-mba8mp-ras314 board updates that support
Raspberry Pi Camera V2 and LVDS using device tree overlay
- A series from Adam Ford that updates i.MX8M Beacon boards for RTC
capacitive load, HDMI audio, Ethernet PHY, etc.
- A set of changes from Daniel Baluta that enables i.MX8MP DSP node
for rproc usage
- A few changes from Francesco Dolcini that add EEPROM compatible
fallback for imx8mp-verdin board, add fan PWM configuation for
imx8mp-toradex-smarc board
- A series from Frank Li to enable PCIe EP support all i.MX8 devices
using device tree overlay
- A change from Laurentiu Mihalcea to enable Sound Open Firmware (SOF)
support on imx95-19x19-evk board
- A few changes from Markus Niebel to disable MDIO Open Drain for
imx93-tqma9352 devices
- A couple of changes from Max Krummenacher to enable PCIe and SATA
support for i.MX8 Apalis and Colibri boards
- A series from Primoz Fiser to enable various devices/functions for
i.MX93 phycore boards
- A patch set from Xu Yang to add USB2.0 support for i.MX95 EVK boards
* tag 'imx-dt64-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
arm64: dts: freescale: Add PHYTEC phyBOARD-Nash-i.MX93 support
arm64: dts: freescale: imx8mp-toradex-smarc: use generic gpio node name
arm64: dts: freescale: imx8mp-toradex-smarc: add gpio expander
arm64: dts: freescale: imx8mp-toradex-smarc: add embedded controller
arm64: dts: freescale: imx8mp-toradex-smarc: add fan PWM configuration
arm64: dts: imx93-tqma9352-mba91xxca: disable Open Drain for MDIO
arm64: dt: imx95: Add TQMa95xxSA
arm64: dts: imx: Align wifi node name with bindings
arm64: dts: freescale: add initial device tree for TQMa8XxS
arm64: dts: imx8mp-tqma8mpql-mba8mp-ras314: Add Raspberry Pi Camera V2 overlay
arm64: dts: imx8mp-tqma8mpql-mba8mp-ras314: Add LVDS device tree overlay
arm64: dts: freescale: Add minimal dts support for imx943 evk
arm64: dts: freescale: Add basic dtsi for imx943
arm64: dts: imx8-colibri: Add PCIe support
arm64: dts: freescale: imx93-phyboard-segin: Order node alphabetically
arm64: dts: freescale: imx93-phyboard-segin: Add EQOS Ethernet
arm64: dts: freescale: imx93-phyboard-segin: Add I2S audio
arm64: dts: freescale: imx93-phyboard-segin: Add USB support
arm64: dts: freescale: imx93-phyboard-segin: Add CAN support
arm64: dts: freescale: imx93-phyboard-segin: Add RTC support
...
Link: https://lore.kernel.org/r/20250512103858.50501-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the Focaltech FT8719 touchscreen controller used in the Poco F1
(EBBG) panel variant.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-4-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the Novatek NT36672A touchscreen controller used in the Poco F1
(Tianma) panel variant.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-3-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable qupv3_id_1 and gpi_dma1 as they are required for configuring
touchscreen. Also add pinctrl configurations needed for touchscreen.
These are common for both the tianma and ebbg touchscreen variant.
In the subsequent patches, we will enable support for the Novatek NT36672a
touchscreen and FocalTech FT8719 touchscreen that are used in the Poco F1
Tianma and EBBG panel variant respectively. This is done in preparation
for that.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-2-bfb53da52945@joelselvaraj.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the PCIe SMMU node to enable address translations
for pcie.
Reviewed-by: Dmitry Baryshkov <lumag@kernel.org>
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250508-qcs8300-pcie-smmu-v3-1-c6b4453b0b22@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Back when display support was added initially to CRD, and we used to have
two separate compatibles for eDP and DP, it was supposed to override the
DP compatible with the eDP one in the board specific devicetree. Since
then, the DP driver has been reworked to figure out the eDP/DP at runtime
while only DP compatible remained in the end.
Even though the override does nothing basically, drop it to avoid
further confusion. Drop it from all X Elite based platforms.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250509-x1e80100-dts-drop-useless-dp-compatible-override-v2-1-126db05cb70a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As described, the analogix-dp controller on rk3588 only supports 2 clocks
and the edp0 node handles that correctly.
The edp1 node on the other hand seems to have a dangling 3rd clock called
spdif, that probably only exists in the vendor-tree.
As that is not handled at all, remove it for now so that we adhere to the
binding.
Fixes: a481bb0b1ad9 ("arm64: dts: rockchip: Add eDP1 dt node for rk3588")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250509152329.2004073-1-heiko@sntech.de
|
|
DRAM: DDR4
Storage: eMMC
PMIC: RK809
Audio: Headphone and speaker
Interface:
- USB3.0 HOST
- USB2.0 HOST
- PCIe x4 slot(pcie2x1 available)
- SD card slot
- GMAC
- debug UART0
NOTE: the USB3.0 and the PCIe reuse the comboPHY, so the USB3.0 work in
USB2 only mode.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20250509102308.761424-6-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
RK3562 is a SoC from Rockchip, which embedded with quad
ARM Cortex-A53.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20250509102308.761424-5-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the nodes for the bimc, pcnoc, snoc and snoc_mm. And wire up the
interconnects where applicable.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: Prepare patch for upstream submission]
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250420-msm8953-interconnect-v2-2-828715dcb674@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the node and pinctrl for uart_5 found on the MSM8953 SoC.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
[luca: Prepare patch for upstream submission]
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250406-msm8953-uart_5-v1-1-7e4841674137@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-11-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-10-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-9-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-8-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-7-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-6-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-5-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-4-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-3-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-2-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the MSM_FRONTEND_DAI_MULTIMEDIA* defines to make the code more
readable. No functional change intended.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-q6asmdai-defines-v1-1-28308e2ce7d4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Extend the USB graph to connect the OCP96011 switch, the PTN36502
redriver, the USB controllers and the MDSS, so that DisplayPort over
USB-C is working.
Connect some parts of the graph directly in the SoC dtsi since those
parts are wired up like this in the SoC directly.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250425-fp5-pmic-glink-dp-v3-4-cc9c2aeb42fb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a node for the OCP96011 on the board which is used to handle USB-C
analog audio switch and handles the SBU mux for DisplayPort-over-USB-C.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250425-fp5-pmic-glink-dp-v3-3-cc9c2aeb42fb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a node for the "Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo
redriver" found on this device.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250425-fp5-pmic-glink-dp-v3-2-cc9c2aeb42fb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
While in the past the 'reg' properties were often written using decimal
'0' for #address-cells = <2> & #size-cells = <2>, nowadays the style is
to use hexadecimal '0x0' instead.
Align this dtsi file to the new style to make it consistent, and don't
use mixed 0x0 and 0 anymore.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250324-sm6350-videocc-v2-1-cc22386433f4@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There's devices that don't have a DMIC connected to va-macro, so stop
setting the pinctrl in sc7280.dtsi, but move it to the devices that
actually are using it.
No change in functionality is expected, just some boards with disabled
va-macro are losing the pinctrl (herobrine-r1, villager-r0, zombie*).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250404-sc7280-va-dmic01-v1-1-2862ddd20c48@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Now that we have ACD support for GPU, add additional OPPs up to
Turbo L3 which are supported across all existing SKUs.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/649354/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Update GPU node to include acd level values.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/649352/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The Radxa E20C has two GbE ports, LAN and WAN. The LAN port is provided
using a GMAC controller and a YT8531C PHY and the WAN port is provided
by an RTL8111H PCIe Ethernet controller.
Enable support for the LAN port on Radxa E20C.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250509202402.260038-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Rockchip RK3528 has two Ethernet controllers based on Synopsys DWC
Ethernet QoS IP.
Add device tree nodes for the two Ethernet controllers in RK3528.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250509202402.260038-2-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.16-rc1
Enable IOMMU support for the internal DMA controller of the QSPI
controller, add aliases for the I2C controllers on Tegra234 to match
hardware block names as well as the UART-D alias on Jetson TX1, and
enable PWM fans on Jetson TX1 and TX2.
Clean up serial port device tree nodes, add missing DMA properties,
enable the GPU on Jetson TX1 and Jetson TX2. Use an extended number of
address- and size-cells on Tegra186 to mirror what is done on other chip
generations.
Enable CEC on developer kit devices.
* tag 'tegra-for-6.16-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Wire up CEC to devkits
arm64: tegra: Add CEC controller on Tegra210
arm64: tegra: Add fallback CEC compatibles
arm64: tegra: Add uartd serial alias for Jetson TX1 module
arm64: tegra: Bump #address-cells and #size-cells on Tegra186
arm64: tegra: p2180: Explicitly enable GPU
arm64: tegra: p3310: Explicitly enable GPU
arm64: tegra: Add DMA properties for Tegra186 and Tegra194 UARTs
arm64: tegra: Drop remaining serial clock-names and reset-names
arm64: tegra: Enable PWM fan on the Jetson TX2 Devkit
arm64: tegra: Enable PWM fan on the Jetson TX1 Devkit
arm64: tegra: Add I2C aliases for Tegra234
arm64: tegra: Configure QSPI clocks and add DMA
Link: https://lore.kernel.org/r/20250509212604.2849901-3-treding@nvidia.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.15, 2nd round:
- One more i.MX8MP nominal drive mode DT fix from Ahmad Fatoum to use
800MHz NoC OPP
- A imx8mp-var-som DT change from Himanshu Bhavani to fix SD card
timeout caused by LDO5
* tag 'imx-fixes-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
Link: https://lore.kernel.org/r/aB6h/woeyG1bSo12@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
- New boards: rk3588-evb2, rk3588-tiger-haikou-video-demo-overlay
- New peripherals: RNG+PCIe+SATA on rk3576; eDP on rk3588;
DMA+I2C+PWM on rk3528; DSI on rk3588
- SPI-flash binding got a supply-property, so a number of boards add
this supply.
- RK3588 wrongly declared the shared memory with SCMI in the peripheral
space - moved to the correct reserved-memory structure now.
- The rest is peripheral enablement accross many boards - like hdmi
output for a big number of boards, regulators, eeprom, etc.
* tag 'v6.16-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (52 commits)
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-rock3c
arm64: dts: rockchip: Enable regulators for Radxa E20C
arm64: dts: rockchip: Add pwm nodes for RK3528
arm64: dts: rockchip: Add onboard EEPROM for Radxa E20C
arm64: dts: rockchip: Add I2C controllers for RK3528
arm64: dts: rockchip: add RK3576 RNG node
arm64: dts: rockchip: Switch to undeprecated qcom,calibration-variant on RK3399
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-quartz64-b
arm64: dts: rockchip: Add phy-supply to gmac0 on NanoPi R5S
arm64: dts: rockchip: fix usb-c port functionality on rk3588-nanopc-t6
arm64: dts: rockchip: Enable bluetooth of AP6611s on OrangePI5 Max/Ultra
arm64: dts: rockchip: add SATA nodes to RK3576
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3588-rock-5b
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-pinetab2
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-rockpro64
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3328-rock64
arm64: dts: rockchip: Add vcc supply to spi flash on rk3399-roc-pc
arm64: dts: rockchip: enable pcie on Sige5
arm64: dts: rockchip: Add HDMI support for roc-rk3576-pc
arm64: dts: rockchip: Enable HDMI0 audio output for Indiedroid Nova
...
Link: https://lore.kernel.org/r/2307187.iZASKD2KPV@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Apple SoC Device Tree updates for 6.16:
- A-series SoCs: CPU cache information has been added to device trees
- M-series SoCs: SPMI controller and SPMI NVMEM nodes have been added
* tag 'asahi-soc-dt-6.16' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: Add PMIC NVMEM
arm64: dts: apple: Add SPMI controller nodes
arm64: dts: apple: t8015: Add CPU caches
arm64: dts: apple: t8012: Add CPU caches
arm64: dts: apple: t8011: Add CPU caches
arm64: dts: apple: t8010: Add CPU caches
arm64: dts: apple: s8001: Add CPU caches
arm64: dts: apple: s800-0-3: Add CPU caches
arm64: dts: apple: t7001: Add CPU caches
arm64: dts: apple: t7000: Add CPU caches
arm64: dts: apple: s5l8960x: Add CPU caches
Link: https://lore.kernel.org/r/20250507160827.87725-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.16, please pull the following:
- Stanimir adds and enables the PCIe root complex Device Tree nodes present on the
Raspberry Pi 5
- Rob updates the BCM2712 L2 cache node names to use a more comforming
name
* tag 'arm-soc/for-6.16/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Use "l2-cache" for L2 cache node names
arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes
arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
Link: https://lore.kernel.org/r/20250505165810.1948927-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoC Device Tree changes
for 6.16, please pull the following:
- Arthur adds a pinctrl node for BCM21664 and updates BCM23550 to use
it, he also drops the DTS file for the BCM59056 PMU chip and leaving
that board level DTS files
- Stefan documents and adds support for the Raspberry Pi 2 2nd revision.
* tag 'arm-soc/for-6.16/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm: Add reference to RPi 2 (2nd rev)
ARM: dts: bcm: Add support for Raspberry Pi 2 (2nd rev)
dt-bindings: arm: bcm2835: Add Raspberry Pi 2 (2nd rev)
ARM: dts: Drop DTS for BCM59056 PMU
ARM: dts: bcm2166x: Add bcm2166x-pinctrl DTSI
ARM: dts: bcm2166x-common: Add pinctrl node
Link: https://lore.kernel.org/r/20250505165810.1948927-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16 (take two)
- Add CANFD support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II
EVK development board,
- Add support for Ethernet port A, 9-pin D-sub serial, and USB on the
RZN1D-DB and RZN1D-EB development and expansion boards,
- Add sound support for the Retronix Sparrow Hawk board,
- Add General PWM Timer (GPT) support for the RZ/G2L and RZ/V2L SoCs
and SMARC EVK boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Enable USB host port
ARM: dts: renesas: r9a06g032-rzn1d400-db: Add pinmux for the CPLD
arm64: dts: renesas: white-hawk-single: Improve Ethernet TSN description
ARM: dts: renesas: r9a06g032-rzn1d400-db: Enable USB device port
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe 9-pin D-sub serial port
arm64: dts: renesas: beacon-renesom: Align wifi node name with bindings
arm64: dts: renesas: rzg2l-smarc: Enable GPT on carrier board
arm64: dts: renesas: r9a07g054: Add GPT support
arm64: dts: renesas: r9a07g044: Add GPT support
arm64: dts: renesas: sparrow-hawk: Add MSIOF Sound support
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Add GMAC1 port
arm64: dts: renesas: r9a09g047e57-smarc: Enable CAN Transceiver
arm64: dts: renesas: r9a09g047e57-smarc: Enable CANFD
arm64: dts: renesas: r9a09g047: Add CANFD node
Link: https://lore.kernel.org/r/cover.1746798755.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16
- Add SDHI, ICU, I2C, PMIC, and GPU support on the RZ/G3E SoC and the
RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add internal SDHI regulator support on the RZ/V2H(P) SoC,
- Add UFS tuning parameters in E-FUSE on the R-Car S4-8 ES1.2 SoC,
- Add support for Ethernet ports C and D, I2C, keys, and SDHI on the
RZ/N1D SoC and the RZN1D-DB and RZN1D-EB development and expansion
boards,
- Add initial support for the RZ/V2N (R9A09G056) and the RZ/V2N EVK
board,
- Add support for the Retronix Sparrow Hawk board, which is based on
R-Car V4H ES3.0,
- Add ISP core support on R-Car V3U, V4H, and V4M,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: r8a779h0: Add ISP core function block
arm64: dts: renesas: r8a779g0: Add ISP core function block
arm64: dts: renesas: r8a779a0: Add ISP core function block
arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support
arm64: dts: renesas: rzg3e-smarc-som: Enable Mali-G52
arm64: dts: renesas: r9a09g047: Add Mali-G52 GPU node
arm64: dts: renesas: rzg3e-smarc-som: Add RAA215300 pmic support
arm64: dts: renesas: rzg3e-smarc-som: Add I2C2 device pincontrol
ARM: dts: renesas: r9a06g032-rzn1d400-eb: describe SD card port
ARM: dts: renesas: r9a06g032: Describe SDHCI controllers
arm64: dts: renesas: Add initial device tree for RZ/V2N EVK
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2N
dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe keys
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe I2C bus
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe I2C bus
ARM: dts: renesas: r9a06g032: Describe I2C controllers
...
Link: https://lore.kernel.org/r/cover.1745582596.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.15
- Updates to dt-bindings
- Document Agilex5 NAND daughter board
- Convert Stratix10 FPGA Manager to json-schema
- Convert Stratix10 Service Layer to json-schema
- Add document for Terasic's DE10-nano board
- Add support for Agilex5 NAND daughter board
- Add basic support for Terasic's DE10-nano board
* tag 'socfpga_dts_updates_for_v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: socfpga: agilex: Add dma channel id for spi
arm64: dts: socfpga: agilex5: add led and memory nodes
arm64: dts: intel: socfpga_agilex: add frequencies to internal oscillators
ARM: dts: socfpga: Add basic support for Terrasic's de10-nano
dt-bindings: altera: Add compatible for Terasic's DE10-nano
arm64: dts: socfpga: agilex5: add qspi flash node
dt-bindings: firmware: stratix10: Convert to json-schema
dt-bindings: fpga: stratix10: Convert to json-schema
arm64: dts: socfpga: agilex5: fix gpio0 address
arm64: dts: socfpga: agilex5: add NAND daughter board
dt-bindings: intel: document Agilex5 NAND daughter board
Link: https://lore.kernel.org/r/20250326121152.1739873-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix a couple of node name warnings from the schema checks:
arch/arm64/boot/dts/amazon/alpine-v2-evp.dt.yaml: io-fabric: $nodename:0: 'io-fabric' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
arch/arm64/boot/dts/amazon/alpine-v3-evp.dt.yaml: io-fabric: $nodename:0: 'io-fabric' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250409210255.1541298-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add ROCK 5B+, which is an improved version of the ROCK 5B with the
following changes:
* Memory LPDDR4X -> LPDDR5
* HDMI input connector size
* eMMC socket -> onboard
* M.2 E-Key is replaced by onboard RTL8852BE WLAN/BT
* M.2 M-Key 1x4 lanes is replaced by 2x2 lanes
* Added M.2 B-Key for USB connected WWAN modules (untested)
* Add second camera port (not yet supported in upstream Linux)
* Add dedicated USB-C port for device power (no impact in DT;
the existing port has not been changed and the new port is
handled by CH224D standalone chip)
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250508-rock5bp-for-upstream-v2-4-677033cc1ac2@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Radxa released some more boards, which are based on the original
Rock 5B. Move its board description into an include file to avoid
unnecessary duplication.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250508-rock5bp-for-upstream-v2-1-677033cc1ac2@kernel.org
Link: https://lore.kernel.org/r/20250508-rock5bp-for-upstream-v2-2-677033cc1ac2@kernel.org
[The original submission was split into two elements, renaming the file
and then moving some nodes around. This was done to make review easier
due to the diff being smaller. This commit is a squash of both of them
to facilitate bisectability and was also intended by the original author]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
General feature for rk3399 industry evaluation board:
- Rockchip RK3399
- 4GB LPDDR4
- emmc5.1
- SDIO3.0 compatible TF card
- 1x HDMI2.0a TX
- 1x HDMI1.4b RX with TC358749XBG HDMI to MIPI CSI2 bridge chip
- 1x type-c DisplayPort
- 3x USB3.0 Host
- 1x USB2.0 Host
- 1x Ethernet / USB3.0 to Ethernet
Tested with HDMI/GPU/USB2.0/USB3.0/TF card/emmc.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Link: https://lore.kernel.org/r/20250506034347.57-3-kernel@airkyi.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
