| Age | Commit message (Collapse) | Author |
|---|
|
Currently, kasan_init_sw_tags() is called before setup_per_cpu_areas(),
so per_cpu(prng_state, cpu) accesses the same address regardless of the
value of "cpu", and the same seed value gets copied to the percpu area
for every CPU. Fix this by moving the call to smp_prepare_boot_cpu(),
which is the first architecture hook after setup_per_cpu_areas().
Fixes: 3c9e3aa11094 ("kasan: add tag related helper functions")
Fixes: 3f41b6093823 ("kasan: fix random seed generation for tag-based mode")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20240814091005.969756-1-samuel.holland@sifive.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Fixes: e18962491696 ("arm64: numa: rework ACPI NUMA initialization")
Cc: <stable@vger.kernel.org> # 4.19.x
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/853d7f74aa243f6f5999e203246f0d1ae92d2b61.1722828421.git.haibo1.xu@intel.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Expand the speculative SSBS errata workaround to more CPUs
- Ensure jump label changes are visible to all CPUs with a
kick_all_cpus_sync() (and also enable jump label batching as part of
the fix)
- The shadow call stack sanitiser is currently incompatible with Rust,
make CONFIG_RUST conditional on !CONFIG_SHADOW_CALL_STACK
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: jump_label: Ensure patched jump_labels are visible to all CPUs
rust: SHADOW_CALL_STACK is incompatible with Rust
arm64: errata: Expand speculative SSBS workaround (again)
arm64: cputype: Add Cortex-A725 definitions
arm64: cputype: Add Cortex-X1C definitions
|
|
Although the Arm architecture permits concurrent modification and
execution of NOP and branch instructions, it still requires some
synchronisation to ensure that other CPUs consistently execute the newly
written instruction:
> When the modified instructions are observable, each PE that is
> executing the modified instructions must execute an ISB or perform a
> context synchronizing event to ensure execution of the modified
> instructions
Prior to commit f6cc0c501649 ("arm64: Avoid calling stop_machine() when
patching jump labels"), the arm64 jump_label patching machinery
performed synchronisation using stop_machine() after each modification,
however this was problematic when flipping static keys from atomic
contexts (namely, the arm_arch_timer CPU hotplug startup notifier) and
so we switched to the _nosync() patching routines to avoid "scheduling
while atomic" BUG()s during boot.
In hindsight, the analysis of the issue in f6cc0c501649 isn't quite
right: it cites the use of IPIs in the default patching routines as the
cause of the lockup, whereas stop_machine() does not rely on IPIs and
the I-cache invalidation is performed using __flush_icache_range(),
which elides the call to kick_all_cpus_sync(). In fact, the blocking
wait for other CPUs is what triggers the BUG() and the problem remains
even after f6cc0c501649, for example because we could block on the
jump_label_mutex. Eventually, the arm_arch_timer driver was fixed to
avoid the static key entirely in commit a862fc2254bd
("clocksource/arm_arch_timer: Remove use of workaround static key").
This all leaves the jump_label patching code in a funny situation on
arm64 as we do not synchronise with other CPUs to reduce the likelihood
of a bug which no longer exists. Consequently, toggling a static key on
one CPU cannot be assumed to take effect on other CPUs, leading to
potential issues, for example with missing preempt notifiers.
Rather than revert f6cc0c501649 and go back to stop_machine() for each
patch site, implement arch_jump_label_transform_apply() and kick all
the other CPUs with an IPI at the end of patching.
Cc: Alexander Potapenko <glider@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Fixes: f6cc0c501649 ("arm64: Avoid calling stop_machine() when patching jump labels")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240731133601.3073-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The __NR_newfstat and __NR_newfstatat macros accidentally got renamed
in the conversion to the syscall.tbl format, dropping the 'new' portion
of the name.
In an unrelated change, the two syscalls are no longer architecture
specific but are once more defined on all 64-bit architectures, so the
'newstat' ABI keyword can be dropped from the table as a simplification.
Fixes: Fixes: 4fe53bf2ba0a ("syscalls: add generic scripts/syscall.tbl")
Closes: https://lore.kernel.org/lkml/838053e0-b186-4e9f-9668-9a3384a71f23@app.fastmail.com/T/#t
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for a number of CPUs in commits:
* 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
* 75b3c43eab594bfb ("arm64: errata: Expand speculative SSBS workaround")
Since then, similar errata have been published for a number of other Arm
Ltd CPUs, for which the same mitigation is sufficient. This is described
in their respective Software Developer Errata Notice (SDEN) documents:
* Cortex-A76 (MP052) SDEN v31.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885749/3100/
* Cortex-A77 (MP074) SDEN v19.0, erratum 3324348
https://developer.arm.com/documentation/SDEN-1152370/1900/
* Cortex-A78 (MP102) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401784/2100/
* Cortex-A78C (MP138) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707916/1600/
* Cortex-A78C (MP154) SDEN v10.0, erratum 3324347
https://developer.arm.com/documentation/SDEN-2004089/1000/
* Cortex-A725 (MP190) SDEN v5.0, erratum 3456106
https://developer.arm.com/documentation/SDEN-2832921/0500/
* Cortex-X1 (MP077) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401782/2100/
* Cortex-X1C (MP136) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707914/1600/
* Neoverse-N1 (MP050) SDEN v32.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885747/3200/
* Neoverse-V1 (MP076) SDEN v19.0, erratum 3324341
https://developer.arm.com/documentation/SDEN-1401781/1900/
Note that due to the manner in which Arm develops IP and tracks errata,
some CPUs share a common erratum number and some CPUs have multiple
erratum numbers for the same HW issue.
On parts without SB, it is necessary to use ISB for the workaround. The
spec_bar() macro used in the mitigation will expand to a "DSB SY; ISB"
sequence in this case, which is sufficient on all affected parts.
Enable the existing mitigation by adding the relevant MIDRs to
erratum_spec_ssbs_list. The list is sorted alphanumerically (involving
moving Neoverse-V3 after Neoverse-V2) so that this is easy to audit and
potentially extend again in future. The Kconfig text is also updated to
clarify the set of affected parts and the mitigation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240801101803.1982459-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Context tracking state related symbols currently use a mix of the
CONTEXT_ (e.g. CONTEXT_KERNEL) and CT_SATE_ (e.g. CT_STATE_MASK) prefixes.
Clean up the naming and make the ctx_state enum use the CT_STATE_ prefix.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The usual summary below, but the main fix is for the fast GUP lockless
page-table walk when we have a combination of compile-time and
run-time folding of the p4d and the pud respectively.
- Remove some redundant Kconfig conditionals
- Fix string output in ptrace selftest
- Fix fast GUP crashes in some page-table configurations
- Remove obsolete linker option when building the vDSO
- Fix some sysreg field definitions for the GIC"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Fix lockless walks with static and dynamic page-table folding
arm64/sysreg: Correct the values for GICv4.1
arm64/vdso: Remove --hash-style=sysv
kselftest: missing arg in ptrace.c
arm64/Kconfig: Remove redundant 'if HAVE_FUNCTION_GRAPH_TRACER'
arm64: remove redundant 'if HAVE_ARCH_KASAN' in Kconfig
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
glibc added support for .gnu.hash in 2006 and .hash has been obsoleted
for more than one decade in many Linux distributions. Using
--hash-style=sysv might imply unaddressed issues and confuse readers.
Just drop the option and rely on the linker default, which is likely
"both", or "gnu" when the distribution really wants to eliminate sysv
hash overhead.
Similar to commit 6b7e26547fad ("x86/vdso: Emit a GNU hash").
Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240718173423.1574395-1-maskray@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Most of this is part of my ongoing work to clean up the system call
tables. In this bit, all of the newer architectures are converted to
use the machine readable syscall.tbl format instead in place of
complex macros in include/uapi/asm-generic/unistd.h.
This follows an earlier series that fixed various API mismatches and
in turn is used as the base for planned simplifications.
The other two patches are dead code removal and a warning fix"
* tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
vmlinux.lds.h: catch .bss..L* sections into BSS")
fixmap: Remove unused set_fixmap_offset_io()
riscv: convert to generic syscall table
openrisc: convert to generic syscall table
nios2: convert to generic syscall table
loongarch: convert to generic syscall table
hexagon: use new system call table
csky: convert to generic syscall table
arm64: rework compat syscall macros
arm64: generate 64-bit syscall.tbl
arm64: convert unistd_32.h to syscall.tbl format
arc: convert to generic syscall table
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
kbuild: add syscall table generation to scripts/Makefile.asm-headers
kbuild: verify asm-generic header list
loongarch: avoid generating extra header files
um: don't generate asm/bpf_perf_event.h
csky: drop asm/gpio.h wrapper
syscalls: add generic scripts/syscall.tbl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.11
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
|
Merge arm64 support for proper 'unsafe' user accessor functionality,
with 'asm goto' for handling exceptions.
The arm64 user access code used the slow fallback code for the user
access code, which generates horrendous code for things like
strncpy_from_user(), because it causes us to generate code for SW PAN
and for range checking for every individual word.
Teach arm64 about 'user_access_begin()' and the so-called 'unsafe' user
access functions that take an error label and use 'asm goto' to make all
the exception handling be entirely out of line.
[ These user access functions are called 'unsafe' not because the
concept is unsafe, but because the low-level accessor functions
absolutely have to be protected by the 'user_access_begin()' code,
because that's what does the range checking.
So the accessor functions have that scary name to make sure people
don't think they are usable on their own, and cannot be mis-used the
way our old "double underscore" versions of __get_user() and friends
were ]
The "(early part)" of the branch is because the full branch also
improved on the "access_ok()" function, but the exact semantics of TBI
(top byte ignore) have to be discussed before doing that part. So this
just does the low-level accessor update to use "asm goto".
* 'arm64-uaccess' (early part):
arm64: start using 'asm goto' for put_user()
arm64: start using 'asm goto' for get_user() when available
|
|
Merge runtime constants infrastructure with implementations for x86 and
arm64.
This is one of four branches that came out of me looking at profiles of
my kernel build filesystem load on my 128-core Altra arm64 system, where
pathname walking and the user copies (particularly strncpy_from_user()
for fetching the pathname from user space) is very hot.
This is a very specialized "instruction alternatives" model where the
dentry hash pointer and hash count will be constants for the lifetime of
the kernel, but the allocation are not static but done early during the
kernel boot. In order to avoid the pointer load and dynamic shift, we
just rewrite the constants in the instructions in place.
We can't use the "generic" alternative instructions infrastructure,
because different architectures do it very differently, and it's
actually simpler to just have very specific helpers, with a fallback to
the generic ("old") model of just using variables for architectures that
do not implement the runtime constant patching infrastructure.
Link: https://lore.kernel.org/all/CAHk-=widPe38fUNjUOmX11ByDckaeEo9tN4Eiyke9u1SAtu9sA@mail.gmail.com/
* runtime-constants:
arm64: add 'runtime constant' support
runtime constants: add x86 architecture support
runtime constants: add default dummy infrastructure
vfs: dcache: move hashlen_hash() from callers into d_hash()
|
|
* for-next/vcpu-hotplug: (21 commits)
: arm64 support for virtual CPU hotplug (ACPI)
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
cpumask: Add enabled cpumask for present CPUs that can be brought online
arm64: document virtual CPU hotplug's expectations
arm64: Kconfig: Enable hotplug CPU on arm64 if ACPI_PROCESSOR is enabled.
arm64: arch_register_cpu() variant to check if an ACPI handle is now available.
arm64: psci: Ignore DENIED CPUs
irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs
irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc()
arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry
arm64: acpi: Move get_cpu_for_acpi_id() to a header
ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug
ACPI: scan: switch to flags for acpi_scan_check_and_detach()
ACPI: processor: Register deferred CPUs from acpi_processor_get_info()
ACPI: processor: Add acpi_get_processor_handle() helper
ACPI: processor: Move checks and availability of acpi_processor earlier
ACPI: processor: Fix memory leaks in error paths of processor_add()
ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add()
ACPI: processor: Drop duplicated check on _STA (enabled + present)
cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER
...
|
|
'for-next/mte', 'for-next/errata', 'for-next/acpi', 'for-next/gic-v3-pmr' and 'for-next/doc', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: add missing MODULE_DESCRIPTION() macros
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
dt-bindings: perf: fsl-imx-ddr: Add i.MX95 compatible
perf: pmuv3: Add new Cortex and Neoverse PMUs
dt-bindings: arm: pmu: Add new Cortex and Neoverse cores
perf/arm-cmn: Enable support for tertiary match group
perf/arm-cmn: Decouple wp_config registers from filter group number
* for-next/cpufeature:
: Various cpufeature infrastructure patches
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
arm64/cpufeatures/kvm: Add ARMv8.9 FEAT_ECBHB bits in ID_AA64MMFR1 register
* for-next/misc:
: Miscellaneous patches
arm64: smp: Fix missing IPI statistics
arm64: Cleanup __cpu_set_tcr_t0sz()
arm64/mm: Stop using ESR_ELx_FSC_TYPE during fault
arm64: Kconfig: fix typo in __builtin_return_adddress
ARM64: reloc_test: add missing MODULE_DESCRIPTION() macro
arm64: implement raw_smp_processor_id() using thread_info
arm64/arch_timer: include <linux/percpu.h>
* for-next/kselftest:
: arm64 kselftest updates
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
kselftest/arm64: Fix a couple of spelling mistakes
kselftest/arm64: Fix redundancy of a testcase
kselftest/arm64: Include kernel mode NEON in fp-stress
* for-next/mte:
: MTE updates
arm64: mte: Make mte_check_tfsr_*() conditional on KASAN instead of MTE
* for-next/errata:
: Arm CPU errata workarounds
arm64: errata: Expand speculative SSBS workaround
arm64: errata: Unify speculative SSBS errata logic
arm64: cputype: Add Cortex-X925 definitions
arm64: cputype: Add Cortex-A720 definitions
arm64: cputype: Add Cortex-X3 definitions
* for-next/acpi:
: arm64 ACPI patches
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
ACPI / amba: Drop unnecessary check for registered amba_dummy_clk
arm64: FFH: Move ACPI specific code into drivers/acpi/arm64/
arm64: cpuidle: Move ACPI specific code into drivers/acpi/arm64/
ACPI: arm64: Sort entries alphabetically
* for-next/gic-v3-pmr:
: arm64: irqchip/gic-v3: Use compiletime constant PMR values
arm64: irqchip/gic-v3: Select priorities at boot time
irqchip/gic-v3: Detect GICD_CTRL.DS and SCR_EL3.FIQ earlier
irqchip/gic-v3: Make distributor priorities variables
irqchip/gic-common: Remove sync_access callback
wordpart.h: Add REPEAT_BYTE_U32()
* for-next/doc:
: arm64 documentation updates
Documentation: arm64: Update memory.rst for TBI
|
|
The generated asm/unistd_compat_32.h header file now contains
macros that can be used directly in the vdso and the signal
trampolines, so remove the duplicate definitions.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Change the asm/unistd.h header for arm64 to no longer include
asm-generic/unistd.h itself, but instead generate both the asm/unistd.h
contents and the list of entry points using the syscall.tbl scripts that
we use on most other architectures.
Once his is done for the remaining architectures, the generic unistd.h
header can be removed and the generated tbl file put in its place.
The Makefile changes are more complex than they should be, I need
a little help to improve those. Ideally this should be done in an
architecture-independent way as well.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is a straight conversion from the old asm/unistd32.h into the
format used by 32-bit arm and most other architectures, calling scripts
to generate the asm/unistd32.h header and a new asm/syscalls32.h headers.
I used a semi-automated text replacement method to do the conversion,
and then used 'vimdiff' to synchronize the whitespace and the (unused)
names of the non-compat syscalls with the arm version.
There are two differences between the generated syscalls names and the
old version:
- the old asm/unistd32.h contained only a __NR_sync_file_range2
entry, while the arm32 version also defines
__NR_arm_sync_file_range with the same number. I added this
duplicate back in asm/unistd32.h.
- __NR__sysctl was removed from the arm64 file a while ago, but
all the tables still contain it. This should probably get removed
everywhere but I added it here for consistency.
On top of that, the arm64 version does not contain any references to
the 32-bit OABI syscalls that are not supported by arm64. If we ever
want to share the file between arm32 and arm64, it would not be
hard to add support for both in one file.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This implements the runtime constant infrastructure for arm64, allowing
the dcache d_hash() function to be generated using as a constant for
hash table address followed by shift by a constant of the hash index.
[ Fixed up to deal with the big-endian case as per Mark Rutland ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit 83cfac95c018 ("genirq: Allow interrupts to be excluded from
/proc/interrupts") is to avoid IPIs appear twice in /proc/interrupts.
But the commit 331a1b3a836c ("arm64: smp: Add arch support for backtrace
using pseudo-NMI") and commit 2f5cd0c7ffde("arm64: kgdb: Implement
kgdb_roundup_cpus() to enable pseudo-NMI roundup") set CPU_BACKTRACE and
KGDB_ROUNDUP IPIs "IRQ_HIDDEN" flag but not show them in
arch_show_interrupts(), which cause the interrupt kstat_irqs accounting
is missing in display.
Before this patch, CPU_BACKTRACE and KGDB_ROUNDUP IPIs are missing:
/ # cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
11: 466 600 309 332 GICv3 27 Level arch_timer
13: 24 0 0 0 GICv3 33 Level uart-pl011
15: 64 0 0 0 GICv3 78 Edge virtio0
16: 0 0 0 0 GICv3 79 Edge virtio1
17: 0 0 0 0 GICv3 34 Level rtc-pl031
18: 3 3 3 3 GICv3 23 Level arm-pmu
19: 0 0 0 0 9030000.pl061 3 Edge GPIO Key Poweroff
IPI0: 7 14 9 26 Rescheduling interrupts
IPI1: 354 93 233 255 Function call interrupts
IPI2: 0 0 0 0 CPU stop interrupts
IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 0 0 Timer broadcast interrupts
IPI5: 1 0 0 0 IRQ work interrupts
Err: 0
After this pacth, CPU_BACKTRACE and KGDB_ROUNDUP IPIs are displayed:
/ # cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
11: 393 281 532 449 GICv3 27 Level arch_timer
13: 15 0 0 0 GICv3 33 Level uart-pl011
15: 64 0 0 0 GICv3 78 Edge virtio0
16: 0 0 0 0 GICv3 79 Edge virtio1
17: 0 0 0 0 GICv3 34 Level rtc-pl031
18: 2 2 2 2 GICv3 23 Level arm-pmu
19: 0 0 0 0 9030000.pl061 3 Edge GPIO Key Poweroff
IPI0: 11 19 4 23 Rescheduling interrupts
IPI1: 279 347 222 72 Function call interrupts
IPI2: 0 0 0 0 CPU stop interrupts
IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 0 0 Timer broadcast interrupts
IPI5: 1 0 0 1 IRQ work interrupts
IPI6: 0 0 0 0 CPU backtrace interrupts
IPI7: 0 0 0 0 KGDB roundup interrupts
Err: 0
Fixes: 331a1b3a836c ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240620063600.573559-1-ruanjinjie@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For varying privacy and security reasons, sometimes we would like to
completely silence the _serial_ console, and only enable it when needed.
But there are many existing systems that depend on this _serial_ console,
so add acpi=nospcr to disable console in ACPI SPCR table as default
_serial_ console.
Signed-off-by: Liu Wei <liuwei09@cestc.cn>
Suggested-by: Prarit Bhargava <prarit@redhat.com>
Suggested-by: Will Deacon <will@kernel.org>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Link: https://lore.kernel.org/r/20240625030504.58025-1-liuwei09@cestc.cn
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This replaces custom macros usage (i.e ID_AA64PFR0_EL1_ELx_64BIT_ONLY and
ID_AA64PFR0_EL1_ELx_32BIT_64BIT) and instead directly uses register fields
from ID_AA64PFR0_EL1 sysreg definition. Finally let's drop off both these
custom macros as they are now redundant.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240613102710.3295108-3-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Remove invalid tty __counted_by annotation (Nathan Chancellor)
- Add missing MODULE_DESCRIPTION()s for KUnit string tests (Jeff
Johnson)
- Remove non-functional per-arch kstack entropy filtering
* tag 'hardening-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
tty: mxser: Remove __counted_by from mxser_board.ports[]
randomize_kstack: Remove non-functional per-arch entropy filtering
string: kunit: add missing MODULE_DESCRIPTION() macros
|
|
In order to move arch_register_cpu() to be called via the same path
for initially present CPUs described by ACPI and hotplugged CPUs
ACPI_HOTPLUG_CPU needs to be enabled.
The protection against invalid IDs in acpi_map_cpu() is needed as
at least one production BIOS is in the wild which reports entries
in DSDT (with no _STA method, so assumed enabled and present)
that don't match MADT.
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-18-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The ARM64 architecture does not support physical CPU HP today.
To avoid any possibility of a bug against such an architecture if defined
in future, check for the physical CPU HP case (not present) and
return an error on any such attempt.
On ARM64 virtual CPU Hotplug relies on the status value that can be
queried via the AML method _STA for the CPU object.
There are two conditions in which the CPU can be registered.
1) ACPI disabled.
2) ACPI enabled and the acpi_handle is available.
_STA evaluates to the CPU is both enabled and present.
(Note that in absence of the _STA method they are always in this
state).
If neither of these conditions is met the CPU is not 'yet' ready
to be used and -EPROBE_DEFER is returned.
Success occurs in the early attempt to register the CPUs if we
are booting with DT (no concept yet of vCPU HP) if not it succeeds
for already enabled CPUs when the ACPI Processor driver attaches to
them. Finally it may succeed via the CPU Hotplug code indicating that
the CPU is now enabled.
For ACPI if CONFIG_ACPI_PROCESSOR the only path to get to
arch_register_cpu() with that handle set is via
acpi_processor_hot_add_init() which is only called from an ACPI bus
scan in which _STA has already been queried there is no need to
repeat it here. Add a comment to remind us of this in the future.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-17-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When a CPU is marked as disabled, but online capable in the MADT, PSCI
applies some firmware policy to control when it can be brought online.
PSCI returns DENIED to a CPU_ON request if this is not currently
permitted. The OS can learn the current policy from the _STA enabled bit.
Handle the PSCI DENIED return code gracefully instead of printing an
error.
Note the alternatives to the PSCI cpu_boot() callback do not
return -EPERM so the change in smp.c has no affect.
See https://developer.arm.com/documentation/den0022/f/?lang=en page 58.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
[ morse: Rewrote commit message ]
Signed-off-by: James Morse <james.morse@arm.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-16-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To support virtual CPU hotplug, ACPI has added an 'online capable' bit
to the MADT GICC entries. This indicates a disabled CPU entry may not
be possible to online via PSCI until firmware has set enabled bit in
_STA.
This means that a "usable" GIC redistributor is one that is marked as
either enabled, or online capable. The meaning of the
acpi_gicc_is_usable() would become less clear than just checking the
pair of flags at call sites. As such, drop that helper function.
The test in gic_acpi_match_gicc() remains as testing just the
enabled bit so the count of enabled distributors is correct.
What about the redistributor in the GICC entry? ACPI doesn't want to say.
Assume the worst: When a redistributor is described in the GICC entry,
but the entry is marked as disabled at boot, assume the redistributor
is inaccessible.
The GICv3 driver doesn't support late online of redistributors, so this
means the corresponding CPU can't be brought online either.
Rather than modifying cpu masks that may already have been used,
register a new cpuhp callback to fail this case. This must run earlier
than the main gic_starting_cpu() so that this case can be rejected
before the section of cpuhp that runs on the CPU that is coming up as
that is not allowed to fail. This solution keeps the handling of this
broken firmware corner case local to the GIC driver. As precise ordering
of this callback doesn't need to be controlled as long as it is
in that initial prepare phase, use CPUHP_BP_PREPARE_DYN.
Systems that want CPU hotplug in a VM can ensure their redistributors
are always-on, and describe them that way with a GICR entry in the MADT.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-15-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
ACPI identifies CPUs by UID. get_cpu_for_acpi_id() maps the ACPI UID
to the Linux CPU number.
The helper to retrieve this mapping is only available in arm64's NUMA
code.
Move it to live next to get_acpi_id_for_cpu().
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-12-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A pair of small arm64 fixes for -rc6.
One is a fix for the recently merged uffd-wp support (which was
triggering a spurious warning) and the other is a fix to the clearing
of the initial idmap pgd in some configurations
Summary:
- Fix spurious page-table warning when clearing PTE_UFFD_WP in a live
pte
- Fix clearing of the idmap pgd when using large addressing modes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Clear the initial ID map correctly before remapping
arm64: mm: Permit PTE SW bits to change in live mappings
|
|
An unintended consequence of commit 9c573cd31343 ("randomize_kstack:
Improve entropy diffusion") was that the per-architecture entropy size
filtering reduced how many bits were being added to the mix, rather than
how many bits were being used during the offsetting. All architectures
fell back to the existing default of 0x3FF (10 bits), which will consume
at most 1KiB of stack space. It seems that this is working just fine,
so let's avoid the confusion and update everything to use the default.
The prior intent of the per-architecture limits were:
arm64: capped at 0x1FF (9 bits), 5 bits effective
powerpc: uncapped (10 bits), 6 or 7 bits effective
riscv: uncapped (10 bits), 6 bits effective
x86: capped at 0xFF (8 bits), 5 (x86_64) or 6 (ia32) bits effective
s390: capped at 0xFF (8 bits), undocumented effective entropy
Current discussion has led to just dropping the original per-architecture
filters. The additional entropy appears to be safe for arm64, x86,
and s390. Quoting Arnd, "There is no point pretending that 15.75KB is
somehow safe to use while 15.00KB is not."
Co-developed-by: Yuntao Liu <liuyuntao12@huawei.com>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Fixes: 9c573cd31343 ("randomize_kstack: Improve entropy diffusion")
Link: https://lore.kernel.org/r/20240617133721.377540-1-liuyuntao12@huawei.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20240619214711.work.953-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The distributor and PMR/RPR can present different views of the interrupt
priority space dependent upon the values of GICD_CTLR.DS and
SCR_EL3.FIQ. Currently we treat the distributor's view of the priority
space as canonical, and when the two differ we change the way we handle
values in the PMR/RPR, using the `gic_nonsecure_priorities` static key
to decide what to do.
This approach works, but it's sub-optimal. When using pseudo-NMI we
manipulate the distributor rarely, and we manipulate the PMR/RPR
registers very frequently in code spread out throughout the kernel (e.g.
local_irq_{save,restore}()). It would be nicer if we could use fixed
values for the PMR/RPR, and dynamically choose the values programmed
into the distributor.
This patch changes the GICv3 driver and arm64 code accordingly. PMR
values are chosen at compile time, and the GICv3 driver determines the
appropriate values to program into the distributor at boot time. This
removes the need for the `gic_nonsecure_priorities` static key and
results in smaller and better generated code for saving/restoring the
irqflags.
Before this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d503201f nop
| 10: d2800c00 mov x0, #0x60 // #96
| 14: d5184600 msr icc_pmr_el1, x0
| 18: d65f03c0 ret
| 1c: d2801400 mov x0, #0xa0 // #160
| 20: 17fffffd b 14 <outlined_local_irq_disable+0x14>
After this patch, local_irq_disable() compiles to:
| 0000000000000000 <outlined_local_irq_disable>:
| 0: d503201f nop
| 4: d50343df msr daifset, #0x3
| 8: d65f03c0 ret
| c: d2801800 mov x0, #0xc0 // #192
| 10: d5184600 msr icc_pmr_el1, x0
| 14: d65f03c0 ret
... with 3 fewer instructions per call.
For defconfig + CONFIG_PSEUDO_NMI=y, this results in a minor saving of
~4K of text, and will make it easier to make further improvements to the
way we manipulate irqflags and DAIF bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617111841.2529370-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In the attempt to clear and recreate the initial ID map for LPA2, we
wrongly use 'start - end' as the map size and make the memset() almost a
nop.
Fix it by passing the correct map size.
Fixes: 9684ec186f8f ("arm64: Enable LPA2 at boot if supported by the system")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240621092809.162-1-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As it is already used in two places, move esr_comment() to a header for
re-use, with a clearer name.
Introduce esr_is_cfi_brk() to detect kCFI BRK syndromes, currently used
by early_brk64() but soon to also be used by hypervisor code.
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-7-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When the hypervisor receives a SError or synchronous exception (EL2h)
while running with the __kvm_hyp_vector and if ELR_EL2 doesn't point to
an extable entry, it panics indirectly by overwriting ELR with the
address of a panic handler in order for the asm routine it returns to to
ERET into the handler.
However, this clobbers ELR_EL2 for the handler itself. As a result,
hyp_panic(), when retrieving what it believes to be the PC where the
exception happened, actually ends up reading the address of the panic
handler that called it! This results in an erroneous and confusing panic
message where the source of any synchronous exception (e.g. BUG() or
kCFI) appears to be __guest_exit_panic, making it hard to locate the
actual BRK instruction.
Therefore, store the original ELR_EL2 in the per-CPU kvm_hyp_ctxt and
point the sysreg to a routine that first restores it to its previous
value before running __guest_exit_panic.
Fixes: 7db21530479f ("KVM: arm64: Restore hyp when panicking in guest context")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-2-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
This generates noticeably better code with compilers that support it,
since we don't need to test the error register etc, the exception just
jumps to the error handling directly.
Note that this also marks SW_TTBR0_PAN incompatible with KCSAN support,
since KCSAN wants to save and restore the user access state.
KCSAN and SW_TTBR0_PAN were probably always incompatible, but it became
obvious only when implementing the unsafe user access functions. At
that point the default empty user_access_save/restore() functions
weren't provided by the default fallback functions.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another small set of EFI fixes. Only the x86 one is likely to affect
any actual users (and has a cc:stable), but the issue it fixes was
only observed in an unusual context (kexec in a confidential VM).
- Ensure that EFI runtime services are not unmapped by PAN on ARM
- Avoid freeing the memory holding the EFI memory map inadvertently
on x86
- Avoid a false positive kmemleak warning on arm64"
* tag 'efi-fixes-for-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/arm64: Fix kmemleak false positive in arm64_efi_rt_init()
efi/x86: Free EFI memory map only when installing a new one.
efi/arm: Disable LPAE PAN when calling EFI runtime services
|
|
The kmemleak code sometimes complains about the following leak:
unreferenced object 0xffff8000102e0000 (size 32768):
comm "swapper/0", pid 1, jiffies 4294937323 (age 71.240s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000db9a88a3>] __vmalloc_node_range+0x324/0x450
[<00000000ff8903a4>] __vmalloc_node+0x90/0xd0
[<000000001a06634f>] arm64_efi_rt_init+0x64/0xdc
[<0000000007826a8d>] do_one_initcall+0x178/0xac0
[<0000000054a87017>] do_initcalls+0x190/0x1d0
[<00000000308092d0>] kernel_init_freeable+0x2c0/0x2f0
[<000000003e7b99e0>] kernel_init+0x28/0x14c
[<000000002246af5b>] ret_from_fork+0x10/0x20
The memory object in this case is for efi_rt_stack_top and is allocated
in an initcall. So this is certainly a false positive. Mark the object
as not a leak to quash it.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/arm64/kernel/arm64-reloc-test.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240612-md-arch-arm64-kernel-v1-1-1fafe8d11df3@quicinc.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The ACPI FFH Opregion code can be moved out of arm64 arch code as
it just uses SMCCC. Move all the ACPI FFH Opregion code into
drivers/acpi/arm64/ffh.c
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20240605131458.3341095-4-sudeep.holla@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The ACPI cpuidle LPI FFH code can be moved out of arm64 arch code as
it just uses SMCCC. Move all the ACPI cpuidle LPI FFH code into
drivers/acpi/arm64/cpuidle.c
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20240605131458.3341095-3-sudeep.holla@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for Cortex-X4 and Neoverse-V3, in commit:
7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
... as per their Software Developer Errata Notice (SDEN) documents:
* Cortex-X4 SDEN v8.0, erratum 3194386:
https://developer.arm.com/documentation/SDEN-2432808/0800/
* Neoverse-V3 SDEN v6.0, erratum 3312417:
https://developer.arm.com/documentation/SDEN-2891958/0600/
Since then, similar errata have been published for a number of other Arm Ltd
CPUs, for which the mitigation is the same. This is described in their
respective SDEN documents:
* Cortex-A710 SDEN v19.0, errataum 3324338
https://developer.arm.com/documentation/SDEN-1775101/1900/?lang=en
* Cortex-A720 SDEN v11.0, erratum 3456091
https://developer.arm.com/documentation/SDEN-2439421/1100/?lang=en
* Cortex-X2 SDEN v19.0, erratum 3324338
https://developer.arm.com/documentation/SDEN-1775100/1900/?lang=en
* Cortex-X3 SDEN v14.0, erratum 3324335
https://developer.arm.com/documentation/SDEN-2055130/1400/?lang=en
* Cortex-X925 SDEN v8.0, erratum 3324334
https://developer.arm.com/documentation/109108/800/?lang=en
* Neoverse-N2 SDEN v17.0, erratum 3324339
https://developer.arm.com/documentation/SDEN-1982442/1700/?lang=en
* Neoverse-V2 SDEN v9.0, erratum 3324336
https://developer.arm.com/documentation/SDEN-2332927/900/?lang=en
Note that due to shared design lineage, some CPUs share the same erratum
number.
Add these to the existing mitigation under CONFIG_ARM64_ERRATUM_3194386.
As listing all of the erratum IDs in the runtime description would be
unwieldy, this is reduced to:
"SSBS not fully self-synchronizing"
... matching the description of the errata in all of the SDENs.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Cortex-X4 erratum 3194386 and Neoverse-V3 erratum 3312417 are identical,
with duplicate Kconfig text and some unsightly ifdeffery. While we try
to share code behind CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS, having
separate options results in a fair amount of boilerplate code, and this
will only get worse as we expand the set of affected CPUs.
To reduce this boilerplate, unify the two behind a common Kconfig
option. This removes the duplicate text and Kconfig logic, and removes
the need for the intermediate ARM64_WORKAROUND_SPECULATIVE_SSBS option.
The set of affected CPUs is described as a list so that this can easily
be extended.
I've used ARM64_ERRATUM_3194386 (matching the Neoverse-V3 erratum ID) as
the common option, matching the way we use ARM64_ERRATUM_1319367 to
cover Cortex-A57 erratum 1319537 and Cortex-A72 erratum 1319367.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <wilL@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Historically, arm64 implemented raw_smp_processor_id() as a read of
current_thread_info()->cpu. This changed when arm64 moved thread_info into
task struct, as at the time CONFIG_THREAD_INFO_IN_TASK made core code use
thread_struct::cpu for the cpu number, and due to header dependencies
prevented using this in raw_smp_processor_id(). As a workaround, we moved to
using a percpu variable in commit:
57c82954e77fa12c ("arm64: make cpu number a percpu variable")
Since then, thread_info::cpu was reintroduced, and core code was made to use
this in commits:
001430c1910df65a ("arm64: add CPU field to struct thread_info")
bcf9033e5449bdca ("sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y")
Consequently it is possible to use current_thread_info()->cpu again.
This decreases the number of emitted instructions like in the following
example:
Dump of assembler code for function bpf_get_smp_processor_id:
0xffff8000802cd608 <+0>: nop
0xffff8000802cd60c <+4>: nop
0xffff8000802cd610 <+8>: adrp x0, 0xffff800082138000
0xffff8000802cd614 <+12>: mrs x1, tpidr_el1
0xffff8000802cd618 <+16>: add x0, x0, #0x8
0xffff8000802cd61c <+20>: ldrsw x0, [x0, x1]
0xffff8000802cd620 <+24>: ret
After this patch:
Dump of assembler code for function bpf_get_smp_processor_id:
0xffff8000802c9130 <+0>: nop
0xffff8000802c9134 <+4>: nop
0xffff8000802c9138 <+8>: mrs x0, sp_el0
0xffff8000802c913c <+12>: ldr w0, [x0, #24]
0xffff8000802c9140 <+16>: ret
A microbenchmark[1] was built to measure the performance improvement
provided by this change. It calls the following function given number of
times and finds the runtime overhead:
static noinline int get_cpu_id(void)
{
return smp_processor_id();
}
Run the benchmark like:
modprobe smp_processor_id nr_function_calls=1000000000
+--------------------------+------------------------+
| | Number of Calls | Time taken |
+--------+-----------------+------------------------+
| Before | 1000000000 | 1602888401ns |
+--------+-----------------+------------------------+
| After | 1000000000 | 1206212658ns |
+--------+-----------------+------------------------+
| Difference (decrease) | 396675743ns (24.74%) |
+---------------------------------------------------+
Remove the percpu variable cpu_number as it is used only in
set_smp_ipi_range() as a dummy variable to be passed to ipi_handler().
Use irq_stat in place of cpu_number here like arm32.
[1] https://github.com/puranjaymohan/linux/commit/77d3fdd
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240503171847.68267-2-puranjay@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Enable ECBHB bits in ID_AA64MMFR1 register as per ARM DDI 0487K.a
specification.
When guest OS read ID_AA64MMFR1_EL1, kvm emulate this reg using
ftr_id_aa64mmfr1 and always return ID_AA64MMFR1_EL1.ECBHB=0 to guest.
It results in guest syscall jump to tramp ventry, which is not needed
in implementation with ID_AA64MMFR1_EL1.ECBHB=1.
Let's make the guest syscall process the same as the host.
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240611122049.2758600-1-tangnianyao@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The function run_all_insn_set_hw_mode() is registered as startup callback
of 'CPUHP_AP_ARM64_ISNDEP_STARTING', it invokes set_hw_mode() methods of
all emulated instructions.
As the STARTING callbacks are not expected to fail, if one of the
set_hw_mode() fails, e.g. due to el0 mixed-endian is not supported for
'setend', it will report a warning:
```
CPU[2] cannot support the emulation of setend
CPU 2 UP state arm64/isndep:starting (136) failed (-22)
CPU2: Booted secondary processor 0x0000000002 [0x414fd0c1]
```
To fix it, add a check for INSN_UNAVAILABLE status and skip the process.
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20240423093501.3460764-1-liwei391@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes, 11 of which are cc:stable.
A few nilfs2 fixes, the remainder are for MM: a couple of selftests
fixes, various singletons fixing various issues in various parts"
* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/ksm: fix possible UAF of stable_node
mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
nilfs2: fix potential hang in nilfs_detach_log_writer()
nilfs2: fix unexpected freezing of nilfs_segctor_sync()
nilfs2: fix use-after-free of timer for log writer thread
selftests/mm: fix build warnings on ppc64
arm64: patching: fix handling of execmem addresses
selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
selftests/mm: compaction_test: fix bogus test success on Aarch64
mailmap: update email address for Satya Priya
mm/huge_memory: don't unpoison huge_zero_folio
kasan, fortify: properly rename memintrinsics
lib: add version into /proc/allocinfo output
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
|
|
Klara Modin reported warnings for a kernel configured with BPF_JIT but
without MODULES:
[ 44.131296] Trying to vfree() bad address (000000004a17c299)
[ 44.138024] WARNING: CPU: 1 PID: 193 at mm/vmalloc.c:3189 remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.146675] CPU: 1 PID: 193 Comm: kworker/1:2 Tainted: G D W 6.9.0-01786-g2c9e5d4a0082 #25
[ 44.158229] Hardware name: Raspberry Pi 3 Model B (DT)
[ 44.164433] Workqueue: events bpf_prog_free_deferred
[ 44.170492] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 44.178601] pc : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.183705] lr : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.188772] sp : ffff800082a13c70
[ 44.193112] x29: ffff800082a13c70 x28: 0000000000000000 x27: 0000000000000000
[ 44.201384] x26: 0000000000000000 x25: ffff00003a44efa0 x24: 00000000d4202000
[ 44.209658] x23: ffff800081223dd0 x22: ffff00003a198a40 x21: ffff8000814dd880
[ 44.217924] x20: 00000000d4202000 x19: ffff8000814dd880 x18: 0000000000000006
[ 44.226206] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000002
[ 44.234460] x14: ffff8000811a6370 x13: 0000000020000000 x12: 0000000000000000
[ 44.242710] x11: ffff8000811a6370 x10: 0000000000000144 x9 : ffff8000811fe370
[ 44.250959] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffff8000811fe370
[ 44.259206] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 44.267457] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000002203240
[ 44.275703] Call trace:
[ 44.279158] remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.283858] vfree (mm/vmalloc.c:3322)
[ 44.287835] execmem_free (mm/execmem.c:70)
[ 44.292347] bpf_jit_free_exec+0x10/0x1c
[ 44.297283] bpf_prog_pack_free (kernel/bpf/core.c:1006)
[ 44.302457] bpf_jit_binary_pack_free (kernel/bpf/core.c:1195)
[ 44.307951] bpf_jit_free (include/linux/filter.h:1083 arch/arm64/net/bpf_jit_comp.c:2474)
[ 44.312342] bpf_prog_free_deferred (kernel/bpf/core.c:2785)
[ 44.317785] process_one_work (kernel/workqueue.c:3273)
[ 44.322684] worker_thread (kernel/workqueue.c:3342 (discriminator 2) kernel/workqueue.c:3429 (discriminator 2))
[ 44.327292] kthread (kernel/kthread.c:388)
[ 44.331342] ret_from_fork (arch/arm64/kernel/entry.S:861)
The problem is because bpf_arch_text_copy() silently fails to write to the
read-only area as a result of patch_map() faulting and the resulting
-EFAULT being chucked away.
Update patch_map() to use CONFIG_EXECMEM instead of
CONFIG_STRICT_MODULE_RWX to check for vmalloc addresses.
Link: https://lkml.kernel.org/r/20240521213813.703309-1-rppt@kernel.org
Fixes: 2c9e5d4a0082 ("bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/all/7983fbbf-0127-457c-9394-8d6e4299c685@gmail.com
Tested-by: Klara Modin <klarasmodin@gmail.com>
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
